Postmaster:if undeliverable, Please return to:

32316 Grand river ave, suite 101farminGton, michiGan 48336

WILLIAMS &LIPTON COMPANY

PresortedFirst Class MailU.S. Postage

PAIDRoyal Oak, MIPermit No. 9

first class mail

Tuesday, June 9Th

Beginning at 10:30 a.m.

WILLIAMS & LIPTON COMPANYnational business asset auctioneers

& appraisers

32316 Grand river, ave. Suite 101, FarminGton, mi 48336

PH: 248.478.2000FaX: 248.478.4046

E-MAIL: williamslipton@hotmail.comWEBSITE: www.williamsandlipton.com

1996

STAMPING PLANT AUCTION

Tuesday, June 9th Beginning at 10:30 a.m.

DANLY SE4-600-144-96 PRESS LINE DANLY SE2-300-96-48 PRESS LINE

By Order of the Secured Party:

W-L-A Stamping3776 N. Van Dyke Rd.

Almont, Michigan 48003

INSPECTION/PREVIEW: Monday, June 8th, 2009 from 9 am to 4 pm

TERMS OF SALE: All items being offered for sale will be offered in piecemeal. All sales are for CASH, CASHIER’S CHECK, or COMPANY CHECK AND/OR WIRE TRANSFER ONLY WITH IRREVOCABLE UNQUALIFIED BANK LETTER OF AUTHORIZATION (the letter must conform to our example as shown). On the day of sale, you will be required to submit a deposit equivalent to no less than 25% of each item purchased at the time of purchase. Your entire account must be settled prior to the removal of any of your purchases. Please show this example of authorization to your banker.

To: Williams & Lipton Company, Farmington, Michigan

Mr. (Customer Name) of (Company Name) is a cus-tomer of this bank. This bank will guarantee irrevo-cable unqualified payment for full face value stated on this letter to Williams & Lipton Company for checks drawn on (account number) for an amount up to $_________.00. This letter is void after (date).

This letter format also applies to all wire transfers. All items being offered as-is, where-is, with the only guarantee being that of good title. Other terms and conditions of sale may be added prior to sale.

imPOrtaNt NOtE: Although the information listed in this brochure has been obtained from informed sources deemed reliable, Williams & Lipton Company does not guarantee nor warrant the accuracy of the information herein contained. It is for this reason that potential buyers should inspect the property being offered for sale on the day of inspection listed in this brochure.

The buyer does hereby assume and does agree to indemnify and hold the Auctioneer and Seller harm-less from any future claim, which shall pertain to the fitness or use of that asset being purchased.

A 12% BUYER’S PREMIUM ON SITEA 15% BUYER’S PREMIUM ON LINE

ALL EQUIPMENT MUST BE REMOVED FROM THE BUILDING BY JUNE 29TH.

DirEctiONs: FOLLOW M-53 PAST DRYDEN RD. TO SALE SITE. SALE SITE ON RIGHT.

For Information regarding this auction, please contact Gary Lipton @ 248-478-2000.

WILLIAMS & LIPTON COMPANYnational business asset auctioneers & appraisers

32316 Grand river, ave. Suite 101, FarminGton, mi 48336 PH: 248.478.2000 • FAX: 248.478.4046E-MAIL: williamslipton@hotmail.com

WEBSITE: www.williamsandlipton.com

You are invited to participate in this auction via the internet, courtesy of BidSpotter.com. Selected major items will be offered online. See catalog for details. Things you must do to participate:1) Register at BidSpotter.com. DO IT Now!2) Send a deposit check in the amount of 25%

of your total anticipated purchases to:Williams & Lipton Company 32316 Grand River Ave., Suite 101 Farmington, MI 48336

It’s that simple. Register, send your deposit and bid. You must be registered and have your

deposit on file with the auctioneer 48 hours prior to the start of the auction.Failure to register and/or failure to send you deposit to the auctioneer will disqualify your from bidding online. Don’t wait!A 15% Buyers Premium will be charged on all BidSpotter.com purchases. If you would like assistance, please call (248) 478-2000.

INTERNET BIDDING

CONTACT GARY LIPTON FOR INFORMATION AT 248-478-2000

Buyer’s Premium

12% on-site15% on-line

Please note:

ALL EQUIPMENT

MUST BE REMOVED

FROM THE BUILDING

BY JUNE 29th.

Tuesday, June 9th BEGINNING AT 10:30 A.M.

By Order of the secured Party:

W-l-a stamPiNG cO.3776 N. Van Dyke Rd., Almont, Michigan 48003

EAGLE SES2-600-144-54 PRESS LINE

EAGLE SES2-600-144-54 PRESS LINE

LINEAR #LTS-2000 PRESS TRANSFER SYSTEM ON EAGLE PRESS

1996

2003

ALMONT

Dryden Rd.

Van Dyke Rd.

32 Mile Rd.

7569

75

53

TOOL ROOM EQUIPMENTBELMONT TECHNOLOGIES MAXI CUT CNC SINKER TYPE ELECTRICAL DISCHARGE MACHINEs/n fb01Z26076

AGIE CUT CLASSIC 2S, 14-AMP, 9-KVA CNC WIRE ELECTRICAL DISCHARGE MACHINE s/n 412 (2002) - classic s control

OKOMOTO MODEL 820A, 8-1/2” X 20” WET SURFACE GRINDER s/n 1107 - electro maGnetic chucK - PoWer Quill travel - coolant sYstem - one shot lubrication

sYstem - motors and controls

ANCHOR LAMINA MODEL LDS, PORTABLE HYDRAULIC JACK SYSTEM s/n lds-1003 - motors and controls

OKUMA & HOWA MODEL 6VA, 3-AXIS CNC VERTICAL MACHINING CENTER s/n 66659 - 27-1/2” X 70” PoWer feed table - 28-Position automatic tool chanGer- 6000 maXimum r.P.m. sPindle sPeed - hYdraulic sYstem - coolant sYstem - chiP auGer

- fanuc series 15m, cnc control sYstem- motors and controls

LANTECH ROTARY PALLET STRETCH WRAPPERs/n not available

IDEAL MODEL IBVA-2043, MOTORIZED BOX STITCHER s/n a-24230 (1993) - motors and controls

SCALE SYSTEM CONSISTING OF:- 6’ X 6’ diamond Plate floor Pad- Gse 574, bench tYPe diGital readout scale sYstem

48” CAPACITY HAND OPERATED APRON BRAKE

HYPERTHERM MAX 43, PORTABLE CUTTER

- hose and Gun - motors and controls

MILLER 250 ARC WELDER

MISCELLANEOUS EQUIPMENT CONSISTING OF: - scissors - steel coil Grabs - crane scale - small c-hooK

MILWAUKEE 14” ABRASIVE SAW

NO IDENTIFYING NAME 60” X 96” PLATFORM SCALE s/n not available - toledo diGital readout scale

POWERMATIC MODEL 1200, 20” FLOOR TYPE DRILL PRESS s/n 9320v113

MISCELLANEOUS INSPECTION EQUIPMENT CONSISTING OF:- Pin GaGes - PluG GaGes - micrometers - caliPers - bench tYPe scale - diGital hardness tester - etc.

SHOP EQUIPMENT - shoP fans - steel Pallet racKinG sections - stacKinG steel Gondola boXes - hYdraulic Pallet JacKs - motoriZed belt conveYors for

Presses - die racKs - tool carts - miscellaneous shoP floor comPuters - roller conveYor Pallet racKs - Pallet racKs - shiPPinG area eQuiPment - die laYout tables - contents of tool crib - fireProof storaGe cabinets - electrical build uP area - shoP desKs - benches - nuts and bolts - fittinGs - tables - chairs - fire eXtinGuishers

- stools - roller sKate conveYors - Granite surface Plates - hold doWns - sPrinGs - heavY dutY Pallet and die shelvinG - nuts and bolts - fittinGs - tables - chairs - stools - benches - larGe QuantitY of steel corruGated boXes - hold doWns - sPrinGs - roller sKate conveYors - fire eXtinGuishers - etc.

MATERIAL HANDLING#H18 HYSTER MODEL J30B, 3000-POUNDS CAPACITY ELECTRIC FORK LIFT TRUCK s/n b160v02697P - side shift - solid tires - overhead Guard

CALDWELL 10-TON CAPACITY C-FRAME COIL HOOK

SPANCO 1-TON CAPACITY PORTABLE GANTRY CRANE - aPProXimatelY 30’ sPan - electrical chain hoist

OKAMOTO SURFACE GRINDER

6”x18”

OKUMA #6VA MACHINING CENTER

cNc

BELMONT CNC EDM LAMINA PRESS JACK SYSTEM DOALL HORIZONTAL, BAND SAW HYSTER FORK LIFT TRUCK

MILLER WIRE WELDER MILLER ARC WELDER ALLIANT VERTICAL MILL LANTECH WRAPPER VIEW OF BASKETS TO BE SOLD PALLET SHELVING

POWER LEVELER FEEDER

FEED LEASE 10000 LB. LOOP OVER FEEDER

QUARTECH PLC CONTROLLERS POWER PINCH STRAIGHTENER HYD UNCOIL SYSTEM

D A N L Y S E 4 - 6 0 0 - 1 4 4 - 9 6 P R E S S & S E S C O . 2 5 0 ” X 6 0 ” W X 4 0 , 0 0 0 L B S C A P Y P R E S S F E E D L I N E

WILLIAMS & LIPTON COMPANYnational business asset auctioneers & appraisers

32316 Grand river, ave. Suite 101 FarminGton, mi 48336

PH: 248.478.2000 • FAX: 248.478.4046E-MAIL: williamslipton@hotmail.com

WEBSITE: www.williamsandlipton.com

PLEASE NOTE THIS PRESS IS NOT ON-SITE: The Danly line is being sold via photos from the auction site: the Danly can be viewed by scheduling a pre-approval appointment. Contact Gary Lipton at (248) 478-2000.

8”x18”

10,000 lBs.

WILLIAMS & LIPTON COMPANYnational business asset auctioneers & appraisers

32316 Grand river, ave. Suite 101, FarminGton, mi 48336 PH: 248.478.2000 • FAX: 248.478.4046

E-MAIL: williamslipton@hotmail.com • WEBSITE: www.williamsandlipton.com

EAGLE SES2-600-144-54 PRESS LINE

1996

DANLY SE2-300-96-48 PRESS LINE VERSON S2-1000-120-42T PRESS MINSTER S2-150-60-36 PRESS MINSTER P2-150-54 PRESS MECON 30” X 15000 LB. PRESS FEED LINE

150 tON150 tON

MECON 42” X 20,000 LB. EAGLE PRESS LINE VAMCO 30”W SERVO PRESS FEEDER VAMCO 40”W SERVO PRESS FEEDER FEED LEASE LOOP OVER FEEDER COE 6000 LB. REEL MECON 30”W POWER STRAIGHTENER

MECON 42” X 20,000 LB. EAGLE PRESS LINE FEEDLEASE POWER STRAIGHTENER ROWE 42”W POWER STRAIGHTENER

Tuesday, June 9th @ 10:30 A.M.By Order of the Secured Party:

W-L-A Stamping3776 N. Van Dyke Rd., Almont, Michigan 48003

1000 tON 30”W fEED

42” x 20,000 lB.

30”W 40”W 6000 lB.

6000 lB. 30”W

30”W 40”W

42”W

MECON 42”W POWER STRAIGHTENER FEEDLEASE UNCOIL REEL SYSTEM

COE UNCOIL REEL SYSTEM

PRESS EQUIPMENTDANLY MODEL SE4-600-144-96, 600-TON CAPACITY X 4-POINT ECCENTRIC STRAIGHT SIDE AIR CLUTCH PRESSs/n 80382501 (1980)- 144” X 96” ram and bed area- 10” bolster- 30” stroKe- 62 1/2” shut heiGht- 10” slide adJustment- 20” stroKes Per minute continuous 15 stroKinG- 57” Wide X 36” WindoWs- safetY curtain- air counter balance- one shot lubrication sYstem- transfer die mechanism- motors and controls- sesco feedinG line (.250-deGrees), consistinG of: - model 49-606, PoWer leveler feeder s/n 22651 - Quartech Plc controller- floor and fence ramP sYstem- indePendent electrical suPPlY cabnet- model 4-2182, eXit ramP s/n 22650- 12-1158, PoWer Pinch straiGhtener s/n 22548- model 53-303, Peeler arm s/n 22649- (3) Quartech Plc controllers- model 45-261, hYdraulic uncoil reel s/n 22645- 40,000-Pound caPacitY coil X 60” Wide X .250-deGrees X 24”- hYdraulics- motors and controls

DANLY MODEL SE2-300-96X48, 300-TON CAPACITY STRAIGHT SIDE DOUBLE CRANK AIR CLUTCH PRESS s/n 78370001 (1978) - floor standinG - 48” X 96” bed and slide area - 8” t-slotted bolster Plate- t-slotted ram- 8” stroKe- 42” shut heiGht- 6” slide adJustment- 30 to 90 variable stroKes Per minute - air counter balance- lubrication sYstem- 30” hiGh X 32” Wide WindoWs - indePendent control console - motors and control - vamco sG30, .062” X 30” Wide caPacitY Press mounted servo feeder s/n sG3008904002- sinGle sided fence- feed lease model flPs-2 1/4-30-11, 30” Wide PoWer straiGhtener s/n 3871 - feed lease model flr-10m-30, 10,000-Pounds caPacitY coil X 30” Wide X 72” o.d. uncoil reel s/n 3947 - coil transfer - motors and controls - hold doWn arm

EAGLE MODEL SES2-600-144-54, 600-TON CAPACITY STRAIGHT SIDE DOUBLE CRANK AIR CLUTCH PRESSs/n eP-136-112996 (1996)- floor standinG- 54” X 144” bed and slide area- 6” t-slotted and taPPed bolster Plate - t-slotted ram- 10” stroKe- 30” shut heiGht- 10” slide adJustment- 30 to 60 variable stroKes Per minute - air counter balance- 125 h.P. motor- lubrication sYstem- 18” hiGh X 40” Wide WindoWs- indePendent control console- dallas fullY inteGrated comPuter based (tuff - serv) feeder s/n 21838- dallas drfe-442-rh .090” X 42” electronic roll feeder s/n 21838- cabinet base- adJustable leGs- sinGle sided fence- mecon model 3str-42, 20 h.P. 42” Wide PoWer straiGhtener s/n 2776n228- hold doWn areas - coil breaKer / Peeler - mecon 200bt42, 20,000-Pounds caPacitY X 42” Wide X 60” o.d. combination coil transfer car and uncoil reel s/n 2459-48- KeePers Press mounted With deflector shield

LINEAR TRANSFER SYSTEMS LTD MODEL LTS - 2000FR, PRESS MOUNTED COMPUTERIZED TRANSFER SYSTEMs/n J2002 - 00259 - lts - 2000 fr (2003)- travels: X = 24”, Y = 12” and Z = 8”- total transfer WeiGht - 200-Pound- desiGn sPeed 45”- Z-aXis hieGht ParK heiGht (Wrt to toP of bolster) 72”- transfer beam Part heiGht (Wrt to toP of bolster) 95”

VERSON MODEL S2-1000-84- 30T, 1000-TON CAPACITY STRAIGHT SIDE DOUBLE CRANK AIR CLUTCH PRESS s/n 18386 (1965) - 30” X 84” bed and slide area- 8” t - slotted bolster Plate- t - slotted ram- 20 - 40 sPm- 14” stroKe- 31” shut heiGht- 4” slide adJustment- air counter balance- lubrication sYstem- 30” hiGh X 38” Wide WindoWs- motors and controls

VERSON MODEL S2-1000-120-42T, 1000-TON CAPACITY STRAIGHT SIDE DOUBLE CRANK AIR CLUTCH PRESS s/n 16400 - 42” X 120” bed and slide area- 9” t-slotted or taPPed bolster Plate- t-slotted ram- 16” stroKe- 41” shut heiGht- 6” slide adJustment - 30 stroKes Per minute - air counter balance - lubrication sYstem - 32” hiGh X 56” Wide WindoWs- indePendent control console- motors and controls- indramat cta Plc control console- vamco 40” Wide Press mounted servo feeder sYstem - roWe model c6-40, 40” Wide X .135” PoWer straiGhtener s/n 24130 - control console - sinGle sided fence sYstem- coe model cPr-Po-20042, 20,000-Pounds coil caPacitY 42” Wide X 60” o.d. combination PoWer reel and coil transfer car s/n 9156-1 - motors and controls

PRECISION “FLEXOPRESS” MODEL SA-250-84-48, 250-TON CAPACITY STRAIGHT SIDE DOUBLE CRANK AIR CLUTCH PRESS - floor standinG - 48” X 84” bed area - 6” t-slotted and taPPed bolster Plate - taPPed and t-slotted ram - v- sPeed drive - air counter balance - lubrication sYstem - indePendent control console- indramat model clm, comPuter based interface Press line control cabinet- coe model cPr-524, 24” Wide cabinet based electronic servo roll feeder s/n G122436 - dallas model 40591, 24” Wide X 60” o.d. X 10,000-Pounds caPacitY combination coil cradle, straiGhtener and looP over feeder sYstem s/n 12009 - motors and controls

MINSTER MODEL S2-150-60-36, 150-TON CAPACITY 2-POINT DOUBLE CRANK STRAIGHT SIDE AIR CLUTCH PRESS s/n 16190 - floor standinG - 12” stroKe - 8” slide adJustment - 20 1/2” shut heiGht - 40 to 80 variable stroKes Per minute - t-slotted ram - 36” X 60” bed area - t-slotted bolster Plate - air counter balance - control console - raPid air 16” servo Press feeder Wardcraft - coe model cPr 6024, 6,000-Pound X 24” Wide X 60” od motoriZed uncoil reel s/n h012531

MINSTER PIECEMAKER MODEL P2-150-54, 150-TON CAPACITY 2-POINT AIR CLUTCH DOUBLE CRANK STRAIGHT SIDE PRESS s/n 18366 - floor standinG - 4” stroKe - 4” slide adJustment - 23” shut heiGht - 45 to 90 variable stroKes Per minute- t-slotted ram - 44” X 54” bed area - t-slotted bolster Plate - control console - vamco model bK2-20-ii, adJustable cam Press feeder- feed lease 10,000-Pounds caPacitY X 18” Wide looP over coil cradle - motors and controls

NIAGARA MODEL E110, 110-TON CAPACITY OPEN BACK INCLINABLE SINGLE POINT AIR CLUTCH PRESS s/n 46201 (1973) - 6” stroKe - 5” slide adJustment - 20” shut heiGht - 54 stroKes Per minute - 27” X 42” bed area - air counter balance - die cushion - Press mounted controls - motors and controls

SESCO MODEL 55 - 422, 30” X 15,000-POUND X 72” OD CAPACITY VARIABLE SPEED UNCOIL REEL s/n 15462 - 1 - hold doWn arm - KeePers - motors and controls

FEED LEASE 6,000-POUND CAPACITY X 12” WIDE COIL CRADLE LOOP OVER FEEDER- motors and controls

PRESS EQUIPMENT

MECON 30” X 15000 LB. REEL SYSTEM

MECON PRESS LINES

NOtE: WE ARE ALSO OFFERING A 24”W PRESS LINE LIKE THE ABOVE LINE.

MECON PRESS LINESMECON 30” WIDE X 15,000-POUND X 72” PRESS FEEDING LINE, CONSISTING OF: - mecon model 400f301hd, feedinG line s/n 2406-76 (1976) - mecon-indramat cta Plc Press feedinG control console - mecon 30” Wide servo feeder - mecon 2 str30, 30” straiGhtener s/n str150 - mecon model 150ccrt / 150btJ30, 30” Wide X 15,000-Pounds coil caPacitY X 72” o.d. motoriZed combination PoWer coil transfer car and reel s/n 2499153/1509606

MECON 24” WIDE X 15,000-POUND X 72” OF PRESS FEEDING LINE, CONSISTING OF:- mecon model 500301, feed line, consistinG of: s/n 2626 - 07- indramat model cts4, control console- 30” Wide Press mounted servo feeder- sinGle sided fence- model 4str24cb, 24” Wide PoWer straiGhtener s/n str144- With hold doWn arm coil breaKer- model 150btJ2u, 15,000-Pounds X 24” Wide X 72” od caPacitY uncoil reel With coil transfer car s/n 1509605- KeePers- deflector shield- motors and controls

You are invited to participate in this auction via the internet, courtesy of BidSpotter.com. Selected major items will be offered online. See catalog for details. Things you must do to participate:1) Register at BidSpotter.com. DO IT Now!2) Send a deposit check in the amount of 25%

of your total anticipated purchases to:

Williams & Lipton Company 32316 Grand River Ave., Suite 101 Farmington, MI 48336

It’s that simple. Register, send your deposit and bid. You must be registered and have your deposit on file with the auctioneer 48 hours prior to the start of the auction.Failure to register and/or failure to send your deposit to the auctioneer will disquali-

fy you from bidding online. Don’t wait!A 15% Buyers Premium will be charged on all BidSpotter.com purchases. If you would like assistance, please call (248) 478-2000.

INTERNET BIDDING

Buyer’s Premium12% on-site15% on-line

Please note: ALL EQUIPMENT MUST BE REMOVED

FROM THE BUILDING BY 5:00 P.M. JUNE 29th.

COE PRESS FEEDER

NIAGARA 110 TON PRESS

PlEasE NOtE: ALL PRESS LINES WILL BE

SOLD INDIVIDUALLY AND IN BULK – WHICHEVER METHOD

SELLS IN GREATER WILL BE THE PROCESS FOR THIS SALE.

10,000 lB. x 30”W x 72”OD 20,000 lB. x 42”W