U.S. Customs and Border Protection Customs-Trade Partnership Against Terrorism Manila, Philippines
description
Transcript of U.S. Customs and Border Protection Customs-Trade Partnership Against Terrorism Manila, Philippines
U.S. Customs and Border U.S. Customs and Border ProtectionProtection
Customs-Trade Customs-Trade Partnership Against Partnership Against
TerrorismTerrorism
Manila, PhilippinesManila, PhilippinesMay 13, 2008May 13, 2008
1st National Conference on SAFE Trade and AEO1st National Conference on SAFE Trade and AEO
CBP’s Mission….CBP’s Mission….
Preventing the entry of Preventing the entry of terrorists and their terrorists and their
weapons while facilitating weapons while facilitating legitimate trade and travellegitimate trade and travel
Advance electronic information analysis and targeting of high risk Advance electronic information analysis and targeting of high risk shipments.shipments.
The 24-Hour Rule and the National Targeting Center (NTC)The 24-Hour Rule and the National Targeting Center (NTC)
Using advanced inspection technologies.Using advanced inspection technologies.Non-intrusive Inspection Technologies (NII)Non-intrusive Inspection Technologies (NII)
Pre-screening high-risk shipments prior to arrival in the U.S. Pre-screening high-risk shipments prior to arrival in the U.S. Container Security Initiative (CSI)Container Security Initiative (CSI)Secure Freight Initiative / 100% ScanningSecure Freight Initiative / 100% Scanning
Partnering with the trade community to increase supply chain Partnering with the trade community to increase supply chain security.security.
Customs-Trade Partnership Against Terrorism (C-TPAT)Customs-Trade Partnership Against Terrorism (C-TPAT)
Layered Enforcement StrategyLayered Enforcement Strategy
SUPPLY CHAIN ROAD MAPSUPPLY CHAIN ROAD MAP
Traditional Import
Intervention
Shift in Shift in Supply Chain SecuritySupply Chain Security
Single Point intervention by Customs at import location.
From Traditional “Single Point” to “End-to-End”
Expanding to Transit Port Intervention
Shift in Shift in Supply Chain SecuritySupply Chain Security
Adding intervention at transit port - CSI type measures.
From Traditional “Single Point” to “End-to-End”
Shift in Shift in Supply Chain SecuritySupply Chain Security
Securing Full Transport Legs
Securing the full maritime portion - ISPS type measures.
From Traditional “Single Point” to “End-to-End”
Shift in Shift in Supply Chain SecuritySupply Chain Security
End-to-End Supply Chain Security Solution
Securing the entire supply chain from end-to-end – C-TPAT type measures.
From Traditional “Single Point” to “End-to-End”
C-TPATC-TPAT
C-TPAT is the largest government-private sector partnership to emerge from the terrorist attacks on September 11, 2001.
C-TPAT was launched in November 2001 with seven major importers who also saw the need for the focus on supply chain security.
The guiding principles for C-TPAT have been enhanced supply chain security, partnership, and a voluntary program.
Who is Eligible to Participate?Who is Eligible to Participate?
U.S. Importers of Record
U.S. / Canada / Mexico Highway Carriers
Air, Rail, Sea Carriers
U.S. Marine Port Authority/Terminal Operators
U.S. Air Freight Consolidators
Ocean Transportation Intermediaries and Non-Vessel Operating Common Carriers (NVOCC)
Mexican and Canadian Manufacturers
Certain Invited Foreign Manufacturers
Licensed U.S. Customs Brokers
C-TPAT Security Criteria (Importers)C-TPAT Security Criteria (Importers)
Business Partner Requirements
Documentation that they are a C-TPAT member. Non-C-TPAT member, written or electronic confirmation meeting C-TPAT security criteria.
Container Security
Written sealing procedures (PAS ISO 17712 seal).Seven-point inspection of container prior to loading / upon receipt. Container Storage - secure locations, preventing unauthorized entry into container or storage area.
Physical Access Controls
Visitor procedures (including deliveries and mail) – Logbooks, visitor badges, escorted access.Employment Procedures – Identification system.
C-TPAT Security Criteria (Importers)C-TPAT Security Criteria (Importers)
Personnel Security
Procedures must be in place to screen prospective employees and to periodically check current personnel (Background, employment history).Personnel termination procedures must be in place to remove access.
Procedural Security
Document processing – accurate, complete & safeguarded.Manifesting procedures – accurate and timely.
Security Training and Awareness
A threat and security awareness program should be established for all employees.
Employees must be made aware of the procedures the company has in place to address a situation and how to report it.
C-TPAT Security Criteria (Importers)C-TPAT Security Criteria (Importers)
Physical Security
Cargo handling and storage facilities must have physical barriers that guard against unauthorized access.
Information Technology Security
Anti-virus software/ Firewalls.
IT security policies, procedures and standards must be in place and provided to employees in the form of training.
An Explanation of C-TPAT TiersAn Explanation of C-TPAT Tiers
ApplicantA company that has submitted their security profile and signed their agreement (online).
Tier 1
A company that has completed their online application, the company has been vetted, the profile has been reviewed along with the company’s importation history and approved by the SCSS. This company is now a C-TPAT member.
Tier 2
A certified company that has undergone their validation and has met minimum security criteria.
Tier 3
A certified company that has been validated and has exceeded minimum security criteria.
ValidationsValidationsThe purpose of the validation is to ensure that the C-TPAT participant’s international supply chain security measures that are contained in their security profile have been implemented and these measures are in accordance with established C-TPAT security criteria or guidelines.
The validation is an opportunity to develop a strong working relationship between CBP and C-TPAT member.
Foreign manufacturers/companies are encouraged to develop strong relationships with their government agencies.
Allows for CBP and C-TPAT partners to jointly discuss security related issues and share best practices.
A forum to review security related issues.Identify supply chain security vulnerabilities & weakness.
Provide feedback on immediate actions required or recommendations to address security issues.
Benefits Assigned to Tier LevelsBenefits Assigned to Tier Levels
ApplicantApplicants do not receive any benefits.
Tier 1Receives a minimal reduction in CBP examinations.
Front of the line treatment.
Assigned a Supply Chain Security Specialist (SCSS).
Invitation to attend the supply chain security conferences hosted by C-TPAT.
Tier 2Receives same as Tier 1 and in addition, a significant reduction in examinations.
This tier status is one of the variables factored into post-incident contingency planning should a terrorist act impact international supply chains.
Tier 3Members have around 6 to 7 times less inspections than non-C-TPAT members.
C-TPAT Achievements C-TPAT Achievements May 1, 2008May 1, 2008
8,363 Certified Partners
7 Field Offices – 200 Supply Chain Security SpecialistsBuffalo, Houston, Los Angeles, Miami, Newark, New York, Washington, DC.
7,632 Total Validations Completed6,729 Initial Validations 903 Re-Validations
533 Total Suspensions/Removals 259 Highway Carriers
Security Criteria ImplementedImporters, Sea Carriers, Highway Carriers. Rail Carriers, Foreign Manufacturers, Customs Brokers, Mexico Long Haul Highway Carrier, Port Authorities/Terminal Operators, Air Carriers. (Under Development: Consolidators).
Tier III Importers - 256
Recognizes the critical role of CBP in securing our nation’s border against terrorism by securing the supply chain and facilitating legitimate trade.
Safe Port ActSafe Port Act
SAFE Port Act Requires CBP:
Certify new applicants within 90 days.
Validate all partners within one year of certification.
Revalidations not less than once every four year.
Third party validation pilot program.
Supply Chain InfluencesSupply Chain Influences
WeatherWeather AccidentsAccidents
SabotageSabotage OthersOthers
EveryEvery Company is at Risk Company is at RiskAccounting IrregularitiesMergers and AcquisitionsClass Action LawsuitPolitical UnrestNatural DisastersCivil DisordersFireBomb ThreatSuspicious PackagesMissing Person, KidnappingLoss of Utilities
Water, Electricity, Natural GasHazardous Materials ReleaseTransportation AccidentProduct Tampering or RecallPandemic OutbreakTerrorist AttackNew Government Regulations
BankruptcyWorkplace ViolenceLabor StoppageChemical – Biological – Radiological – Nuclear – ExplosiveContamination of Food / WaterStructural CollapseSupply Chain Interruption
Main EntitiesMain Entities
Shipper/Consignor: An entity (individual/firm) that sends freight.
Consignee: An entity that receives the freight.
Shipment is transacted between consignor and consignee.
Carrier: Transports the shipment.
CarrierCarrier
Transportation provider.
Has the responsibility of transporting the shipment.
Typically owns and operates transportation equipment (airplanes, ships, trains, trucks, etc.).
Common Carrier
Serve all customers.
Without discrimination.
Charge reasonable rates.
Deliver shipments in stated time, is liable for damage.
Carrier TypesCarrier Types
Private Carrier
Owns and manages its own transportation service.
Are not regulated.
Can provide service to other corporations.
Contract Carrier
Provides service to specific customers based on negotiated rates.
Tailor service to meet the needs of each specific customer.
Rates are not public.
Entry to the industry is regulated.
But not required to serve all shippers.
Transportation ComparisonTransportation Comparison
RailRailMass movement of goods.
Accessibility is a problem.
Cheaper, more efficient than trucks.
High fixed costs, low variable costs.
RoadwaysRoadwaysGreatest accessibility.
Less capacity than rail.
lower initial investment, but more expensive operation.
WaterWaterMass movement of goods.
Excellent for long-haul transportation of low-cost commodities.
Very high capacity.
Cheaper operation that rail and roadways.
AirAirFast
Expensive
Reliable (freight is less prone to damage)
Trucking TermsTrucking Terms
Truck Load/Full Truck Load (TL/FTL)TL Carriers: Shipper must contract entire truck.
Simpler to manage.
Less expensive per unit mile.
Less than Truckload (LTL) LTL Carriers: Shipper can contract the carrier for freight that will not require entire truck.
More complicated.
More expensive per unit mile.
Intermodal TransportationIntermodal Transportation
Using a container that can be transferred from the vehicle of one mode to the vehicle of another; and with the movement covered under a single bill of lading.
ContainerContainer
Single, rigid, sealed, re-useable metal box of standardized dimensions.
Merchandise is packed in container and containers are shipped via trucks, rail, ships.
Usually 8 ft in width and height, can be 20 ft or more in length.
TEU (Twenty-foot Equivalent Unit)
FEU (Forty-foot Equivalent Unit)
TerminalTerminal
Transportation facility with one or more functions:Access (point where freight enters and leaves the transportation system)
Freight consolidation/distribution
Mode transfer
Vehicle transfer
Storage and warehousing
Fleet maintenance
Freight ForwarderFreight Forwarder
An agency that receives freight from a shipper and then arranges transportation with one or more carriers. Often performs other tasks:
Consolidation
Pickup/delivery
Freight handling, documentation, clearances.
Nonvessel-Operating Common Carrier (NVOCC)Nonvessel-Operating Common Carrier (NVOCC)
Owns no vessels (ships).Provides ocean shipping freight-forwarding service.
Provides consolidated, negotiated-rate services for ocean and inland water carriers.
May affiliate with freight-forwarders to provide pickup/delivery and other services.
Third Party Logistics Provider (3PL)Third Party Logistics Provider (3PL)
Firm to which logistics services are outsourced.Typically handles many of the following tasks:
Procurement
Order management
Inventory/warehousing
Transportation
ConsolidationConsolidation
Bringing together small shipments, often from different shippers.
Take advantage of economies of scale.
In-Vehicle: Perform pickups from many shippers and consolidate into larger shipments.
Out-of-Vehicle: Occurs at terminals; shipments to a single customer are consolidated before shipping.
POTENTIALPOTENTIALIMPACTIMPACT
PROBABILITY / LIKELIHOODPROBABILITY / LIKELIHOOD
NUCLEARNUCLEARWEAPONWEAPON
IMPROVISEDIMPROVISEDNUCLEARNUCLEAR
DEVICEDEVICE
RADIOACTIVERADIOACTIVEMATERIALMATERIAL
CHEMICAL AGENTCHEMICAL AGENTOR TOXICOR TOXIC
INDUSTRIALINDUSTRIALCHEMICALCHEMICAL
BIOLOGICALBIOLOGICALAGENTAGENT
Threats - Impact vs. ProbabilityThreats - Impact vs. Probability
Know Your Business Partners!Know Your Business Partners!
The goal of mutual recognition is to link the various international industry partnership programs, so that together they create a unified and sustainable security posture that can assist in securing and facilitating global cargo trade.
The principle behind aligning partnership programs is to create a system whereby all participants in an international trade transaction are approved by Customs as observing specified standards in the secure handling of goods and relevant information.
C-TPAT & Mutual RecognitionC-TPAT & Mutual Recognition
The signing of a mutual recognition arrangement is the procedure that enables information sharing activities to occur in accordance with the terms of the Customs Mutual Assistance Agreement (CMAA), and each participant’s domestic law and policy.
Mutual recognition is not “automatic.” A business must be in good standing with both Customs administrations.
Mutual recognition can only occur to the extent permitted by law, regulation, or ruling, and is subject to national security considerations.
C-TPAT & Mutual RecognitionC-TPAT & Mutual Recognition
C-TPAT & Mutual RecognitionC-TPAT & Mutual RecognitionThe Customs-Trade Partnership Against Terrorism (C-TPAT) mutual recognition process involves four (4) phases:
A side-by-side comparison of the program requirements. This is designed to determine if the programs align on basic principles.
A pilot program of joint validation visits. This is designed to determine if the programs align in basic practice.
The signing of a mutual recognition arrangement.
The development of mutual recognition operational procedures, primarily those associated with information sharing.
New Zealand – Secure Export SchemeJune 29, 2007 - Mutual Recognition Arrangement Signed
Canada – Partners in ProtectionArrangement Completed – Signing Pending
Jordan – Golden ListArrangement Completed – Signing Pending
C-TPAT & Mutual RecognitionC-TPAT & Mutual Recognition
Japan – Authorized Economic Operator
Side-by-Side Comparison – Under Development
Singapore – Secure Trade Partnership
Side-by-Side Comparison – Under Development
Australia – Authorized Economic Operator
Pending Operational Status
Mexico – Alliance for Secure Commerce
Under Development
C-TPAT & Mutual RecognitionC-TPAT & Mutual Recognition
European Union – Authorized Economic OperatorDevelopment – 2007
Side-by-Side Comparison - Completed
Joint Visitation Pilot - Completed
Implementation – January 2008European Commission is responsible for the implementation of the AEO program in the 27 Member States.
Operational – January 2009Mutual Recognition – To Be Determined
C-TPAT & Mutual RecognitionC-TPAT & Mutual Recognition
C-TPAT& AEO
C-TPATbut No AEO
No C-TPAT but AEO
No C-TPAT & No AEO
Business security practices are known to both CBP and foreign program.
Business security practices are known to CBP, but unknown to foreign program.
Business security practices are unknown to CBP, but known to foreign program.
Business security practices are unknown to both CBP and foreign program.
RISKRISK
LOW
HIGH
EXPLANATIONS
U.S. Customs and Border Protection (CBP) - Customs-Trade Partnership Against Terrorism (C-TPAT)
Authorized Economic Operator (AEO)
Mutual Recognition Security ModelMutual Recognition Security Model
ReviewReview
There are numerous ways that a supply chain can be interrupted.
The goal of government-business partnership programs is to institutionalize identifiable security procedures to protect the global trade supply chain.
Mutual Recognition involves the alignment of security requirements of different international programs.
Questions?Questions?
Customs-Trade Partnership Against TerrorismCustoms-Trade Partnership Against Terrorism