URRACO 75 SERIES - Siebert & Cian Waste wood grades A1–A4 (German waste wood recycling and...

URRACO 75 SERIES Product presentation, v 1.0_2019

CONTENT

URRACO 75 SERIES3 |

n Urraco 75 Series at a glance

n Product positioning

n Applications

n Technical product details

n Machine overview

n Mobility

n Drive system

n Powerful Scania Diesel engine

n ABB electric drive

n Mobile hydraulics

n Automatic detection of non-shreddables

n 3-circuit cooling system

n Cutting system

n Hopper

n Material output

n Service & maintenance

n Optional features & add-ons

n Over-belt magnetic separator

n Fire extinguishing unit in the engine compartment

n Water sprinkling system

n Additional wear protection package cutting system

n Technical data

n Our customers

URRACO 75 SERIES AT A GLANCE

CHAPTER 1

COMPACT MOBILE SHREDDING

URRACO 75 SERIES5 |

URRACO 75 SERIES AT A GLANCE

n Powerful, extremely compact mobile twin-shaft shredder

n Ideal for the primary shredding of bulky waste and waste wood

n Adapts perfectly to the material thanks to shaft pairs available in different designs

n Customisable drive configurations with our SCANIA diesel or ABB electric motors

n Depending on your mobility needs, the machine is available in a hook-lift version or with a tracked chassis

FINE WASTE WOOD

URRACO 75 SERIES6 |

URRACO 75 SERIES AT A GLANCE: APPLICATIONS

n Waste wood grades A1–A4 (German waste wood recycling and disposal ordinance) for combustion purposes

n Specifications

Input material Waste wood (A1 – A3)

Input size < 2,000 mmBulk density approx. 200 – 300 kg/m³Moisture < 30%Output size 90 %< 200 mm

WASTE WOOD INPUT

WASTE WOOD OUTPUT

GARDEN WASTE

URRACO 75 SERIES7 |


n Volume reduction of freshly cut, little or slightly lignified plant residues for better composting

n Specifications

Input material Garden waste

Input size < 2,000 mmBulk density approx. 300 – 350 kg/m³Moisture < 90%Output size 90 %< 250 mm

GARDEN WASTE INPUT

GARDEN WASTE OUTPUT

COARSE WASTE WOOD

URRACO 75 SERIES8 |


n Waste wood grades A1–A4 (German waste wood recycling and disposal ordinance) for combustion purposes

n Specifications

Input material Waste wood (A1 – A4)

Input size < 2,000 mmBulk density approx. 200 – 300 kg/m³Moisture < 30%Output size 90%< 300 mm

WASTE WOOD INPUT

WASTE WOOD OUTPUT

WOODY ROOTS

URRACO 75 SERIES9 |


n Primary shredding of roots for subsequent processing or combustion purposes

n Specifications

Input material Roots

Input size < 2,000 mmBulk density approx. 300 – 350 kg/m³Moisture < 30%Output size 90%< 300 mm

WOODY ROOTS INPUT

WODDY ROOTS OUTPUT

MSW & BULKY WASTE

URRACO 75 SERIES10 |


n Primary shredding of waste from municipal and bulky waste collections for co-incineration or recycling

n Specifications

Input material MSW & bulky wasteInput size < 2,000 mmBulk density approx. 150 – 250 kg/m³Moisture < 30%Output size 90%< 300 mm

BULKY WASTE INPUT

BULKY WASTE OUTPUT

LIGHT SCRAP



n Light scrap shredding for subsequent sorting and material recovery

n Specifications

Input material Light scrap; diameter < 6 mmInput size < 2,000 mmBulk density approx. 400 – 500 kg/m³Moisture -Output size 90%< 300 mm

LIGHT SCRAP INPUT

LIGHT SCRAP OUTPUT

TECHNICALPRODUCT DETAILS

CHAPTER 2

FEATURES


URRACO 75: MACHINE OVERVIEW

DOUBLE TILTING HOPPER SYSTEM

HYDRAULICS

3-CIRCUIT COOLING SYSTEM

DRIVE

OPERATION & HANDLING

CUTTING UNIT

MATERIAL OUTPUT

OPTIONAL FEATURES:

MAGNETIC FE-SEPARATOR

WATER SPRINKLINGSYSTEM

FIRE EXTINGUISHING SYSTEM

HARDFACINGSHAFTS

MOBILITY

OPERATION & HANDLING


URRACO 75 SERIES: FEATURES

n User-friendly HMI Bosch-Rexroth controller with intuitive menu

n Convenient shredder operation from the wheel loader using our remote

n High uptimes thanks to our guided fault diagnosis functions

n Location-independent, fast software support thanks to our remote maintenance system with integrated GSM module

MOBILITY



n Customisable to your mobility requirements thanks to different chassis designs

n Country-specific hook lift versions with optional wheel axle for easy transport and fast manoeuvring on-site

n Tracked, joystick-operated version with optional flat or rubberised track shoes for independent on-site transfer (diesel only)

DRIVE SYSTEM


URRACO 75: MACHINE OVERVIEW

DIESEL ENGINE OR ELECTRIC MOTOR

HYDRAULIC PUMP

EXPANSION TANK

HYDRAULIC MOTORS

CUTTING UNIT

PLANETARY GEARBOX

6/2-WAY VALVES

POWERFULDIESEL ENGINE



n High uptimes with our tried-and-tested SCANIA technology

n Environmentally friendly operation thanks to particulate filter and SCR exhaust cleaning system

n Low operating costs with our state-of-the-art engine technology

HIGH-PERFORMANCE ELECTRIC DRIVE



n Highly efficient thanks to our tried-and-tested ABB electric motors

n Space-saving installation with no time-consuming cabling thanks to our integrated control cabinet

n Easy operation on more than one site with an optional plug&play connector

HIGHLY EFFICIENTMOBILE HYDRAULICS



n Maximum efficiency at the perfect operating point with our electronic BODAS control system

n Up to 15% more throughput compared to standard hydraulic systems thanks to faster adaptation to current performance requirements

n Low diesel consumption due to consistent diesel motor load

n Adapts perfectly to input material thanks to pre-configured programs

0

20

40

60

80

100

120

140

Throughput Consumption

Standard hydraulics BODAS control system

+ 15% - 30%

AUTOMATIC DETECTION OF NON-SHREDDABLES



n Securely powers down in the event of non-shreddables in the input material

n Shafts and drive unit protected by electronic system monitoring

n Easy removal of non-shreddables thanks to automated shaft release

3-CIRCUIT COOLING SYSTEM



n Long service life thanks to the effective cooling of hydraulics, engine and charge air

n Clean operation in dusty environments thanks to self-cleaning Cleanfix reversible fan

CUTTING SYSTEM

TITLE OF THE PRESENTATION22 |


1. Cutters

2. Feed hooks

3. Cleaning teeth

4. Scrapers

5. Breaker bar

CUTTING SYSTEM WASTE WOOD FINE



n Patented cutting system with a combination of cutting and crushing

n Cutting action for homogenous output

n Crushing action for fewer superfine particles

n High throughput thanks to an aggressive automatic intake

CUTTING SYSTEMWASTE WOOD ROUGH



n Crushing action for coarse primary shredding of waste wood

n Undeterred by non-shreddables such as iron fittings, screws and bolts etc.

CUTTING SYSTEMC&I / MSW



n Agressive material intake in both directions of rotation thanks to signature ripper combos

n Optimised geometry for automatic self-cleaning of the cutting unit

CUTTING SYSTEMLIGHT SCRAP



n Optimised geometry in particularly robust design for shredding metal

n Reinforced cutter holders for harder materials such as sheet metal, aluminium profiles, cookware etc.

HOPPER



n Easy feeding with our spacious, hydraulically operated double-tilting hopper system

n Continuous feeding thanks to a tilting angle of 80°

n Convenient remote shredder operation from the wheel loader

MATERIAL OUTPUT



n Low dust emissions due to hydraulic height-adjustable conveyor belt, which can be even adjusted during operation

n Fast machine packing for storage or transport thanks to our hydraulically operated, fully retractable double folding conveyor

n Separate ferrous metals with optional over-belt magnet

n Long service life even with heavy materials such as scrap or industrial waste with our optional steel-reinforced conveyor belt

SERVICE & MAINTENANCE



n Low downtimes thanks to sophisticated service functions

n No lengthy waiting times with our remote maintenance via integrated GSM module

n SCANIA engines for quick service availability worldwide

n Shaft exchange or hardfacing service by trained Lindner employees

OPTIONAL FEATURES & ADD-ONS

CHAPTER 3

OVER-BELT MAGNETIC SEPARATOR

URRACO 75 SERIES: OPTIONAL FEATURES

n Permanent over-belt magnet for ferrous metal separation

n Fitted above the conveyor belt

n Hydraulically height-adjustable

n Incl. discharge chute


FIRE EXTINGUISHING UNIT IN THE ENGINE COMPARTMENT


n For effective fire extinguishing in the engine compartment

n Releases cooling and suffocating foam

n Self-monitoring, no electricity needed

n Robust and maintenance-free thanks to galvanised, non-pressurised pipes


WATER SPRINKLING SYSTEM


n To remove dust from the filling and discharge areas

n 4 pcs. spray nozzles positioned in the suction hood

n 2 pcs. spray nozzles positioned in the output area

n Incl. water filter and pressure limiter

n Switch it ON/OFF using the control panel


ADDITIONAL WEAR PROTECTION PACKAGECUTTING SYSTEM


n Ideal for shredding particularly abrasive material

n Cutter hardfacing (type HW)

n Scraper hardfacing (type HW)

n Support wire made of cobalt hard alloy


TECHNICAL DATA

CHAPTER 4

URRACO 75 SERIES


TECHNICAL DATA

OUR CUSTOMERSURRACO 75 SERIES

WE ARE PROUD TO WORK WITH:

URRACO 75 SERIES


URRACO 75 SERIES - Siebert & Cian Waste wood grades A1–A4 (German waste wood recycling and...

Documents

Transcript of URRACO 75 SERIES - Siebert & Cian Waste wood grades A1–A4 (German waste wood recycling and...