UPSHINE PL30120-45W-P Frameless Panel Light · 3. Fix the panel light into right place. 4....
Transcript of UPSHINE PL30120-45W-P Frameless Panel Light · 3. Fix the panel light into right place. 4....
Technical Application Guide for UP-SHINE LED Frameless Panel LightUP-PL30120-45W-P
www.upshine.com [email protected]
Introduction Frameless panel is an improved version compared to regular panels.They are of high lumen output, high CRI>80, top branded driver with stable working performance. Dimmable version comes with triac dim, 0-10V dim, DALI dim, it shares great popularity by perfect dimming range and great compatibility with worldwide dimmers. The Frameless structural design makes it special and elegant. 5mm thickness diffuser with extremely even light output provides high quality lighting effect.
● Up to 80% energy saving compared to standard CFL● Long lifetime of 40,000 hours ● 120° wide beam angle● CCT: 3000K 4000K 5000K 5700K● No UV/IR light● Environment friendly, without Mercury or any other hazardous substances
Application notes● IP40 for indoor use● Professional electrician for installation only● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasWidely used for various commercial lighting and residential lighting applications, such as office, shopping mall, hotel, restaurant, hospital, home lighting etc.
Certificates
SAA
www.upshine.com [email protected]
Model Voltage Power PowerFactor
Lumen(±5%)
Beamangle CCT Lifespan CRI Dimmable Dimension
UP-PL30120-45W-P AC100-240V 45W ≥0.9 3750 120o 3000K 40000h ≥80 No 1195*295*16mm
UP-PL30120-45W-P AC100-240V 45W ≥0.9 3820 120o 4000K 40000h ≥80 No 1195*295*16mm
UP-PL30120-45W-P AC100-240V 45W ≥0.9 3870 120o 5000K 40000h ≥80 No 1195*295*16mm
UP-PL30120-45W-P AC100-240V 45W ≥0.9 3910 120o 5700K 40000h ≥80 No 1195*295*16mm
UP-PL30120-45W-P-D AC230V 45W ≥0.9 3540 120o 3000K 40000h ≥80 Yes 1195*295*16mm
UP-PL30120-45W-P-D AC230V 45W ≥0.9 3630 120o 4000K 40000h ≥80 Yes 1195*295*16mm
UP-PL30120-45W-P-D AC230V 45W ≥0.9 3690 120o 5000K 40000h ≥80 Yes 1195*295*16mm
UP-PL30120-45W-P-D AC230V 45W ≥0.9 3750 120o 5700K 40000h ≥80 Yes 1195*295*16mm
Driver data DIM Non-dim
Input rated Voltage AC230V AC100-240V
Frequency 50Hz 50/60Hz
Input Voltage AC200-240V AC85-265V
Efficiency ≥80% ≥86%
Total load Wattage 45W±5% 45W±5%
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.25A ≤0.5A
Full load output Voltage DC35-38V DC35-38V
Rated output current 1000mA 1050mA
Output current range 1000mA±5% 1050mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
Withstand voltage AC3750V AC3750V
Technical Specifications
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
ProtectionOperating
TempOperatingHumidity
Storage Temp
45W II IP40 -20oC~45oC 0~90% -20oC~65oC
Driver data Sheet
Product Information
www.upshine.com [email protected]
380 500 600 700 800Wavelength(nm)
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
3000K
Max=5338 [1.0=20000] 3.50SDCM F3000K
x=0.4464 y=0.4049
380 500 600 700 800Wavelength(nm)
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
4000K
Max=7171 [1.0=20000] 2.12SDCM F4000K
x=0.3841 y=0.3816
380 500 600 700 800Wavelength(nm)
Max=7133 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
5000K
3.87SDCM F5000K
x=0.3467 y=0.3678
380 500 600 700 800Wavelength(nm)
Max=7428 [1.0=20000]Sp
ectr
um0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
5700K
5.57SDCM F5700K
x=0.3459 y=0.3705
Spectral Distribution
Photometric Diagram
3000K
Beam diagramPolar intensity diagram Cartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 114.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15
13.5
12
10.5
9
7.5
6
4.5
3
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 114.45deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 2316 lm
1.112, 3.977fc11.97, 42.81lx
50.96ft1553.15cm
10.19ft310.63cm
20.38ft621.26cm
30.57ft931.89cm
40.77ft1242.52cm
27.79, 99.42fc299.1, 1070lx
6.948, 24.86fc74.78, 267.5lx
3.088, 11.05fc33.24, 118.9lx
1.737, 6.214fc18.70, 66.89lx
3.281ft
1m
13.12ft
4m
9.843ft
3m
6.562ft
2m
16.4ft
5m
4000K
Beam diagramPolar intensity diagram Cartesian intensity diagram
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15
13.5
12
10.5
9
7.5
6
4.5
3
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 114.53deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 2425 lm
1.164, 4.167fc12.53, 44.85lx
51.03ft1555.54cm
10.21ft311.11cm
20.41ft622.22cm
30.62ft933.32cm
40.83ft1244.43cm
29.11, 104.2fc313.3, 1121lx
7.276 26.04fc78.32, 280.3lx
3.234, 11.57fc34.81, 124.6lx
1.819, 6.510fc19.58, 70.08lx
3.281ft
1m
13.12ft
4m
9.843ft
3m
6.562ft
2m
16.4ft
5m
UNIT: cdAVERAGE BEAM ANGLE(50%): 114.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
5700K
Beam diagramPolar intensity diagram Cartesian intensity diagram
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15
13.5
12
10.5
9
7.5
6
4.5
3
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 114.54deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 2420 lm
1.162, 4.154fc12.50, 44.71lx
51.04ft1555.84cm
10.21ft311.17cm
20.42ft622.33cm
30.63ft933.50cm
40.84ft1244.67cm
29.04, 103.8fc312.6, 1118lx
7.261 25.96fc78.15, 279.4lx
3.227, 11.54fc34.73, 124.2lx
1.815, 6.490fc19.54, 69.86lx
3.281ft
1m
13.12ft
4m
9.843ft
3m
6.562ft
2m
16.4ft
5m
UNIT: cdAVERAGE BEAM ANGLE(50%): 114.7 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
5000K
Beam diagramPolar intensity diagram Cartesian intensity diagram
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)15
13.5
12
10.5
9
7.5
6
4.5
3
1.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 114.50deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 2430 lm
1.162, 4.144fc12.40, 44.61lx
51.04ft1555.84cm
10.21ft311.17cm
20.42ft622.33cm
30.63ft933.50cm
40.84ft1244.67cm
28.68, 103.2fc312.2, 1115lx
7.255,25.90fc78.02, 279.2lx
3.225, 11.50fc34.69, 123.9lx
1.815, 6.490fc19.54, 69.86lx
3.281ft
1m
13.12ft
4m
9.843ft
3m
6.562ft
2m
16.4ft
5m
UNIT: cdAVERAGE BEAM ANGLE(50%): 114.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
www.upshine.com [email protected]
80
70
60
50
40
30
20
10
0
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison14
:29:
22
15:2
0:16
16:1
1:16
17:0
2:16
17:5
3:16
18:4
4:16
19:3
5:16
20:2
6:16
21:1
7:16
22:0
8:16
22:5
9:16
23:5
0:16
0:41
:16
1:32
:16
2:23
:16
3:14
:16
4:05
:16
4:56
:16
5:47
:16
6:38
:16
7:29
:16
8:20
:16
IC
Capacitor
MOS
PCB
Fitting
Voltage transformer
Environmental temperature
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
AVERAGE BEAM ANGLE (50%): 114.2DEG
UNIT: cd
C0/180, 114.5 deg
C30/210, 114.0 deg
C60/240, 114.1 deg
C90/270, 114.4 deg
300
600
900
1200
1500
0O
+/-180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
0
www.upshine.com [email protected]
Installation1.Recessed into ceiling
1. Remove ceiling plaster slab. 2. Connect power
supply.
3. Fix the panel light into right place.
4. Stabilize the panel.
2. Suspending
1. Fastening the bracket on the ceiling with plastic anchor and screw.
3. Connect one end of steel wire with panel, another end with mounting box.
2. Put the DC line through the mounting box and connect the power supply.
4. Hang the mounting box back to the bracket.
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 136*21*37 5.1 24.5 4
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 262 1048 28
40'' standardcontainer 524 2096 56
www.upshine.com [email protected] Phone: +86 755 2919 7332Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
3. Suspending
1. Fix the plastic anchoring into suitable place on the ceiling
2. Use the tapping s c r e w f i x t h e installation mount wi th the p last ic anchoring on the ceiling
4. Adjust the steel wire to a suitable length. Connect with power supply. Turn on the LED panel light.
3 . Le t the s tee l wire with knot end t h rough c l i p s ’ s hole on panel. Fix the wire’s another s i d e w i t h t h e installation mount.