Uponor priceguide july2014lr

Building a Sustainable Future TogetherPRICE GUIDE - JULY 2014

2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

In industrial and commercial settings, reduction of heating costs is highly dependent on making optimal use of surface area and space. Therefore, an intelligent heating solution has to cope with budget restrictions. In addition, static and dynamic stress caused by machinery, vehicles and shelves, imposes extra requirements that any kind of infrastructural solution has to meet. With all their advantages, commercial solutions by Uponor are the most worthwhile system.

Uponor Commercial solutions - making economical use of surface area and space

Uponor Limited provides plumbing and heating systems for all building types, from one bedroom flats to large public buildings.

We offer real solutions for both underfloor and radiator heating systems, including intelligent controls. We are at the forefront of heating innovation, providing a complete comfort experience to all our users.

Our facility at Lutterworth has seen rapid expansion and houses the UK‘s largest, professionally qualified, technical team in the heating solutions industry.

Our level of expertise is regularly called upon as a reference point by the professions, third-party manufacturers and users alike. Indeed our slogan ‘no sales without support’ shows our dedication to always inaugurate support before a project begins. On a practical level we appreciate our products are only as good as the technician who installs them. This is why we have our own dedicated training academy which allows our customers to learn about the theoretical aspects of underfloor heating; putting this knowledge into practice in our training suite, giving the best results to the end user.

Invisible Comfort: Indoor ClimateWe offer a broad variety of radiant heating and cooling solutions, providing maximum comfort for the user, high energy efficiency and best possibilities for taking advantage of environmentally sound renewable energies.

Reliability and Premium Quality: Plumbing SolutionsWe offer plumbing systems that are corrosion-resistant, hygienic and flexible, providing the construction industry with fast and efficient installation technologies and the end user with long lasting, healthy and trouble free solutions. Our pre-insulated piping systems offer an efficient performance solutions for local energy and water distribution.

Renewable and Energy SolutionsThere is increasing interest in these environmentally friendly systems due to the potential for low running costs, reduction in use of fossil fuels, and the reduction in CO2 emissions. Uponor offers energy management for renewable application when it comes to heating. Be it homes, offices, schools or any industrial site, we offer solutions which are innovating.

Uponor: more than products.

Complete solutions for a sustainable home:Uponor provide the fundamental systems for ideal home comfort, combined with the most efficient use of energy. Our aim is to enrich people’s way of life and offer comprehensive plumbing, heating and energy solutions.

3e n q u i r i e s . u k @ u p o n o r. c o m

4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

The world is constantly changing. And as a future-focused company, we’re

always looking for new ways to improve and make life easier for you, our

customers. So over the forthcoming months, you will notice some new

developments happening from Uponor.

This is how our future looks

Simpler Naming New 2014

We have introduced a new, simpler approach to our line names. This will help create clarity, making it easier to identify products and build systems.

New Packaging New 2014

We will be gradually introducing a new look to our packaging to give a cleaner, fresher look to Uponor products! We will also be aiming to improve the handling and reduce waste by optimising the types of packaging and their dimensions.

New 2014


New Lables

Product Identity New 2014

We have new labels too that are designed to make life easier for you when you’re looking for our products.

Starting with some of our pipe portfolio, we will introduce clearer brand identity and marking on our products. Along with the new name graphics, our PEX pipes will feature blue stripes to identify them as Uponor.

New Lables New 2014

6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

NAME CHANGES

PREVIOUS NAME NEW NAME WHAT CHANGES FOR YOU?

Plumbing

Uponor MLC Pipe and conduit, 12 - 110mm, including tools and accessories

Uponor MLC No change

Uponor Q&E PEX pipe, 16-25mm;Wirsbo-EvalPEX pipe, 32-63mm

evalPEX All PEX plumbing pipes groupedunder the evalPEX names

Press fittings for MLC pipe system Press No change

Q&E fittings for PEX pipe system Q&E No change

Modular riser fitting system for 63-110mm RS No change

RTM fitting technology RTM No change

Adaptors, tools, brackets and clips Plumbing accessories No change

Radiant Heating & Cooling Pipes

Wirsbo PEPEX Q&E 20mm pipe for UFH/C Comfort Pipe PLUS The new name for our premium PEX pipe for commercial heating and cooling

Uponor EvalPEX 16mm pipe for UFH/C Comfort Pipe New name for our 4-layer PEX pipe for underfloor heating cooling applications

PEX pipe for self-attaching UFH System Klett Comfort Pipe New name

Floor / Wall / Ceiling Installation

Clamp Track Fix New name

Heat emission plates HEP 400 D No change

Self-attaching system for UFH Klett New name

Heat emission plates, panels and foam for 12mm, 16mm and 20mm system

Siccus New line name for plates and floating floor systems

Pipe clips and Kombi gun Tacker New name

UP12 system Tignum 12 New name

7

PREVIOUS NAME NEW NAME WHAT CHANGES FOR YOU?

Radiant Heating & Cooling Accessories

General Fittings Fit New name for all general UFH/C fittings

Pumpgroups, controls & accessories Fluvia New name for all all pumpgroups

Various Components Multi No change

One Pack UFH Multi OnePack No change

Wireless 24V stats and controls Radio 24V No change

Statpack Statpack No change

Manifold Connection and Cabinets Vario New name

WGF and HTG Manifolds, Actuators Vario B New name

ST Manifolds, Actuators Vario S New name

Mixing Valves Viva New name for all mixing valves

Wired 230V thermostas and controls Wired 230V No change

Wired 24V thermostas and controls Wired 24V No change

Pre-Insulated Pipe System

LHD Accessories Ecoflex Grouping accessories together

Aqua Ecoflex Aqua No change

Quattro Ecoflex Quattro No change

Supra Ecoflex Supra No change

Supra Plus Ecoflex Supra PLUS No change

Thermo Ecoflex Thermo No change

Wipex Wipex No change

Ground Energy

Geothermal manifolds, chambers and accessories Geo New name for Ground Energy

Horizontal Collector Geo Hortis New name

Ground Energy Pipe Geo Pipe New name

Vertical and U-collector Geo Vertis New name

Flexible Plumbing & Radiator Heating

Ecoflex (Pre-Insulated Pipe) System

With over 30 million metres installed worldwide, Uponor Ecoflex pipe is the proven choice for energy efficient transportation of hot water for heating and tap water applications, saving you money on installation and running costs.

Underfloor Heating

Supplying a broad variety of radiant heating and cooling solutions for Domestic and Commercial UFH systems. Providing maximum comfort for the user, high energy-efficiency, and the best possibilities for taking advantage of environmentally sound renewable energies.

We offer plumbing solutions that are corrosion resistant, hygienic, and flexible. Providing the construction industry with fast and efficient installation technologies, giving the end-users a long-lasting, healthy and trouble-free solution.


ContentsUponor Overview .................................................................... 2

Uponor Brand Changes .......................................................... 3

Uponor Loyalty Scheme - uPoints ........................................ 10

Flexible Plumbing & Radiator Heating ...................... 11

Uponor MLC Plumbing System ............................... 12

RTM Fitting ................................................................. 14

Riser System ............................................................... 27

Smart End Range ........................................................ 35

Q&E Plumbing System .............................................. 39

Ecoflex (Pre-Insulated) Pipe ........................................ 51

Underfloor Heating ...................................................... 65

Uponor Multi OnePack Range ..................................... 66

Uponor Klett (SAS) System .......................................... 70

Screed Floor Systems .................................................... 73

Timber Floor Systems .................................................. 76

Floating Floor Systems ................................................ 77

Floating Floor Systems - System 12.............................. 78

Comfort Pipe Plus (PEX 20) Systems ......................... 85

Underfloor Heating Controls ....................................... 93

Energy Systems (Collector Pipe for GSHPs) ........... 107

Tools and Accessories ................................................ 113

Plumbing Tools .......................................................... 114

Underfloor Heating Tools............................................ 120

Uponor Training .......................................................... 123

Uponor - Conditions of Sale ............................................... 124

1 0

Exclusively for Uponor installers – collect uPoints and get rewarded!

You have put your trust in us and our products. Now we would like to thank you – with our loyalty scheme, Uponor & more. Collect uPoints when buying selected Uponor products and exchange them for rewards.

1. Register

Register to join the scheme and enjoy the many advantages of Uponor & more!

2. Collect uPoints

uPoint vouchers are enclosed in many key Uponor products. Just enter the unique voucher code number in the Uponor & more portal at www.uponor-more.co.uk and fi ll up your uPoint account.

3. Choose rewards

Now for the best part of the Uponor & more scheme. Once you have collected enough uPoints, simply exchange them for fantastic rewards! Enjoy!

It’s so easy: www.uponor-more.co.ukIt’s so easy: www.uponor-more.co.ukIt’s so easy: www.uponor-more.co.uk

Uponor uPoint voucher and rewardsUponor voucher enclosed in many Uponor Products.

Code:uPoints:

Item:

www.uponor-more.com

Uponor & moreUponor & more Some examples of our rewards:

1 0

LOOK FORuPointsOn selected Uponor Products

uPointsOn selected Uponor Products

Flexible Plum

bing & R

adiator Heating

e n q u i r i e s . u k @ u p o n o r. c o m


We offer plumbing solutions that are corrosion resistant, hygienic, and fl exible. Providing the construction industry with fast and effi cient installation technologies, giving the end-users a long-lasting, healthy and trouble-free solution.

• MLC Plumbing Pipes 12

• RTM Fitting 14

• MLC Plastic Press Plastic Fittings 18

• MLC Metal Press Metal Fittings 20

• Riser System 27

• Press Manifold, Adapters & Accessories 30

• Press Radiator & Tapwater Terminations 33

• Q&E Plumbing System 39

1 1

Flexible Plum

bing & R

adiator Heating

1 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng

Description Code Qty Price per/m

3m lengths

16x2mm 1013436 75m

20x2.25mm 1013441 51m

25x2.5mm 1013443 30m

32x3mm 1013445 18m

5m lengths

16x2mm 1013432 125m

20x2.25mm 1013438 85m

25x2.5mm 1013442 50m

32x3mm 1013444 30m

40x4mm 1013446 20m

50x4.5mm 1013449 20m

63x6mm 1013451 15m

75x7.5mm 1013453 5m

90x8.5mm 1013455 5m

110x10mm 1013457 5m


Description uPoints Code Qty Price per/m

12x1.6mm 1013575 100m

16x2mm 250 1013463 50m

16x2mm 350 1013377 75m

16x2mm 500 1013378 100m

16x2mm 500 1013559 120m

16x2mm 900 1013371 200m

16x2mm 2500 1013380 500m

20x2.25mm 700 1013388 100m

20x2.25mm 1500 1013392 200m

25x2.5mm 800 1013398 50m

25x2.5mm 1500 1013400 100m

32x3mm 1000 1013401 50m

100% diffusion-resistant multi-layer composite (MLC) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbing and radiator-connection applications, and also for distribution mains and risers. Manufactured to ISO 21003: 2008 for hot and cold water and heating applications with full WRAS approval.

100% diffusion-resistant multi-layer composite (MLC) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbing and radiator-connection applications, and also for distribution mains and risers. Manufactured to ISO 21003: 2008 for hot and cold water and heating applications with full WRAS approval.

uPoints


Uponor MLC white, supplied in straight lengthsMLCP white, supplied in straight lengths

Uponor MLC white, supplied in coilsMLCP white, supplied in coils

Uponor MLC Plumbing Pipes

2.31

3.81

5.56

7.07

2.31

3.81

5.65

7.07

11.62

17.34

28.03

43.89

64.89

93.36

1.61

1.96

1.96

1.96

1.96

1.96

1.96

3.06

3.06

4.84

4.84

6.96

1 3e n q u i r i e s . u k @ u p o n o r. c o m

Flexible Plum

bing & R

adiator Heating

Uponor MLC Plumbing Pipes


16x2mm - Blue 500 1013675 75m

20x2.25mm - Blue 800 1013677 75m

16x2mm - Red 500 1013679 75m

20x2.25mm - Red 800 1013681 75m


16 Black (12mm) 1012857 50m

20 Red (16mm) 1012858 50m

20 Blue (16mm) 1012859 50m

20 Black (16mm) 1012860 50m

23 Red (20mm) 1012862 50m

23 Blue (20mm) 1012863 50m

23 Black (20mm) 1012864 50m

29 Red (25mm) 1012866 50m

29 Blue (25mm) 1012867 50m

29 Black (25mm) 1012869 50m

36 Black (32mm) 1012872 25m


16x2mm 700 1013625 75m

20x2.25mm 900 1013626 75m

25x2.5mm 1050 1013627 50m


16x2mm 800 1013628 75m

20x2.25mm 1000 1013629 75m

25x2.5mm 1100 1013630 50m

MLC in corrugated protective tube made of high-density polyethylene. Supplied in coils.

Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of sizes of conduit are available on request. First number shown in description refers to I.D. of the protective tube. The second is the size of MLC suitable. N.B. Does not include MLC.

MLC encased in 9mm insulation. Supplied in coils. Round-extruded pipe insulation made of polyethylene foam with closed-cell material structure. WLG 040. - Fire-resistance class B2, conforming to DIN 4102. - Insulation thickness 9mm, for cold-water conduits conforming to DIN 1988 (part2), and heating system conduits conforming to EnEV. - Additional continuous impact sound insulation required.

MLC encased in 13mm insulation. Supplied in coils. Concentrically-extruded pipe insulation made of polyethylene foam with closed-cell material structure. - Fire-resistance class B2, conforming to DIN 4102. - Insulation thickness 13mm, for cold-water conduits conforming to DIN 1988 (part 2), and heating system conduits conforming to 50% insulation requirement. - Additional continuous impact sound insulation required.

PREVIOUS Name NEW Name

Reference chart on pages 6 & 7

Note: Product name changes

uPoints

500

uPoints

700

uPoints

800

Uponor MLC-in-PipeMLCP-in-Pipe

Uponor MLC conduitMLCP conduit

Uponor MLC Tubolit S 9mmMLCP Tubolit S 9mm

Uponor MLC Tubolit S-50 13mmMLCP Tubolit S-50 13mm

3.64

5.46

3.64

5.46

0.82

0.91

0.91

0.91

1.15

1.15

1.15

1.68

1.68

1.68

1.97

3.53

4.70

6.15

3.73

5.19

6.68

1 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ngUponor Ring Tension Memory Fittings:

Uponor’s RTMTM Technology:

Ring Tension Memory with the Tool-Inside

concept, ideal for refurbishment and

new buildings, allowing safe, quick and

professional joints, thanks to the Joint

Indicator and no tool dependence. RTMTM

Technology works perfectly with Uponor’s

MLCP pipes.

Technology

Ring Tension Memory Technology

RTM Coupling

Description Code Qty Price each

16mm PPSU 1048542 10

20mm PPSU 1048543 10

25mm PPSU 1048544 5

RTM Reducer


20mmx16mm PPSU 1048545 10

25mmx20mm PPSU 1048546 5

25mmx16mm Brass 1048573 5

16 20 25Colour coded diameters

It is easy to install due to its revolutionary RTMTM Technology,

a technology that has allowed Uponor to incorporate the Tool-Inside:

The Ring with Tension Memory. This revolutionary RTMTM Technology

creates constant pressure ensuring perfect and long lasting joints.

3.74

4.72

7.25

4.41

6.52

8.46


Flexible Plum

bing & R

adiator Heating

Uponor RTM Fittings

RTM Elbow


16mm PPSU 1048547 10

20mm PPSU 1048548 10

25mm PPSU 1048549 5

RTM Female Elbow


16mmx½” FT (PPSU) 1048561 10

16mmx½” FT (Brass) 1048590 10

20mmx½” FT (PPSU) 1048562 10

20mmx½” FT (Brass) 1048591 10

20mmx¾” FT (Brass) 1048592 10

25mmx¾” FT (PPSU) 1048563 5

25mmx¾” FT (Brass) 1048593 5

25mmx1” FT (Brass) 1048594 5

RTM Male Elbow (Brass)


16mmx½” MT 1048599 10

20mmx½” MT 1048600 10

20mmx¾” MT 1048601 10

20mmx¾” MT 1048602 5

RTM Wall Plate Elbow


16mmx½” FT Brass 1048564 10

20mmx½” FT Brass 1048597 5

20mmx¾” FT Brass 1048598 5

NEW

NEW

3.81

5.14

8.64

6.70

7.86

8.22

9.91

10.58

11.48

14.49

15.34

8.99

8.99

14.02

8.22

9.65

11.96

14.50

1 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor RTM Fittings

RTM U-Tap Female Elbow


16mmx½” FT 1061621 5

20mmx½” FT 1061622 5

For use with MLC Smart End mounting brackets. See page 35.


NEW

NEWRTM U-Tap Male Elbow Mixer


16mmx½” MT 1062221 5

RTM Equal Tee


16mm PPSU 1048550 10

20mm PPSU 1048551 10

25mm PPSU 1048552 5

RTM Reduced Tee


20mmx16mmx20mm PPSU 1048553 10



25mmx16mmx25mm Brass 1048577 5



RTM Female Tee (Brass)


16x½” FTx16mm 1048587 10

20x½” FTx20mm 1048588 10

20x¾” FTx20mm 1048589 10

33.99

49.99

39.99

4.81

7.55

12.38

7.25

7.25

7.25

16.74

10.88

11.48

12.69

14.81

16.61


Flexible Plum

bing & R

adiator Heating

Uponor RTM Fittings

RTM Female Adapter Description Code Qty Price each

16x½ FT (PPSU) 1048558 10

16x½” FT (Brass) 1048581 10

20x½” FT (PPSU) 1048559 10

20x½” FT (Brass) 1048582 10

20x¾” FT (Brass) 1048583 10

25x¾” FT (PPSU) 1048560 5

25x¾” FT (Brass) 1048584 5

25x1” FT (Brass) 1048585 5

RTM Male AdapterDescription Code Qty Price each

16x½” MT (PPSU) 1048539 10

16x½” MT (Brass) 1048566 10

20x½” MT (PPSU) 1048540 10

20x½” MT (Brass) 1048567 10

20x¾” MT (Brass) 1048568 10

25x¾” MT (PPSU) 1048541 5

25x¾” MT (Brass) 1048569 5

25x1” MT (Brass) 1048570 5

RTM Copper Adapter


16/15mm 1048603 10

25/22 1057377 5

RTM Radiator Connection Elbow


16/200mm 1057379 1

RTM Swivel Nut UnionDescription Code Qty Price each

16x½” FT 1057375 10

20x¾” FT 1057376 10

RTM Calibrator ToolDescription Code Qty Price each

16/20/25mm 1048606 1

Radiator Connection elbow with 15mm plated copper spigot.

6.65

8.15

7.61

9.19

10.27

9.55

12.69

14.50

4.72

7.13

5.68

8.45

9.37

8.22

12.08

14.02

5.68

8.99

16.92

1.81

10.05

12.16

1 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Plastic Press Fittings

Composite coupling/reducer


16x16mm 1022736 10

20x16mm 1022740 10

20x20mm 1022737 10

25x16mm 1022741 5

25x20mm 1022742 5

25x25mm 1022738 5

32x25mm 1022743 5

32x32mm 1022739 5

40x40mm 1046401 5

50x50mm 1046402 3

40x25mm 1046403 5

40x32mm 1046404 5

50x32mm 1046405 3

50x40mm 1046406 3

Composite elbow 90°


16x16mm 1022714 10

20x20mm 1022715 10

25x25mm 1022716 5

32x32mm 1022717 5

40x40mm 1046386 5

50x50mm 1046387 3

Composite elbow 45°


40x40mm 1046388 5

50x50mm 1046389 3

Made of PPSU, with press sleeve.



2.75

3.35

3.69

5.22

5.37

5.66

8.88

9.25

14.84

18.98

13.65

15.42

18.40

19.58

3.45

4.31

6.10

9.49

17.21

25.51

28.47

37.96


Flexible Plum

bing & R

adiator Heating

AB

C

Uponor MLC Plastic Press Fittings

Composite tee


16x16x16mm 1022718 10

20x20x20mm 1022719 10

25x25x25mm 1022720 5

32x32x32mm 1022721 5

40x40x40mm 1046390 5

50x50x50mm 1046391 3

Composite tee with reducer


A B C

16x20x16mm 1022722 10

20x16x16mm 1022723 10

20x16x20mm 1022724 10

20x20x16mm 1022725 10

20x25x20mm 1022726 10

25x16x16mm 1022727 5

25x16x20mm 1022728 5

25x16x25mm 1022729 5

25x20x20mm 1022730 5

25x20x25mm 1022731 5

32x16x32mm 1022732 5

32x20x32mm 1022733 5

32x25x25mm 1022734 5

32x25x32mm 1022735 5

40x20x40mm 1046392 5

40x25x32mm 1046393 5

40x25x40mm 1046394 5

40x32x32mm 1046395 5

40x32x40mm 1046396 5

50x25x40mm 1046397 3

50x25x50mm 1046398 3

50x32x50mm 1046399 3



4.67

6.99

11.91

18.94

26.10

39.15

6.49

6.49

6.49

6.49

11.25

7.84

9.87

9.06

8.43

10.62

13.68

16.60

16.67

16.93

20.28

21.95

21.95

21.36

23.14

27.04

29.08

32.63

2 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Metal Press Fittings

Press connection with female thread


16x½” FT 1014536 10

20x½” FT 1014574 10

20x¾” FT 1014577 10

20x1” FT 1014580 10

25x¾” FT 1014599 5

25x1” FT 1014602 5

32x1” FT 1014618 5

32x1¼” FT 1014621 5

40x1¼” FT 1046903 5

40x1½” FT 1046904 5

50x1½” FT 1046907 3

Press connection with male thread


16x½” MT 1014525 10

16x¾” MT 1014534 10

20x½” MT 1014561 10

20x¾” MT 1014564 10

20x1” MT 1014567 10

25x¾” MT 1014589 5

25x1” MT 1014592 5

32x1” MT 1014610 5

32x1¼” MT 1014613 5

40x1¼” MT 1046901 5

40x1½” MT 1046902 5

50x1½” MT 1046905 3

50x2” MT 1046906 3

Made of plated brass, with press sleeve. BSP female-threaded adapter for screw connections.

Made of plated brass, with press sleeve. BSP male-threaded adapter for screw connections.

5.07

5.42

7.01

11.36

7.56

13.36

13.96

20.73

19.83

21.47

23.91

3.88

7.66

4.83

5.83

8.51

7.35

9.57

10.88

17.11

17.67

23..05

25.12

40.68


Flexible Plum

bing & R

adiator Heating

Uponor MLC Metal Press Fittings

Press connection Union


25x25 1059405 8

32x32 1059406 5

40x40 1059407 4

50x50 1059408 4

NEW

Press connection with female thread (swivel nut)


16x½” FT 1015270 10

16x¾” FT 1015274 10

20x½” FT 1015283 10

20x¾” FT 1015286 10

25x1” FT 1015297 5

32x1” FT 1060093 5

32x1¼” FT 1015301 5

40x1¼” FT 1060094 5

40x1½“ FT 1046937 5

50x1½“ FT 1060095 3

50x1¾” FT 1046938 3

50x2” FT 1046939 3

Made of plated brass, with press sleeve and flat sealing washer. Detachable BSP screw fitting for surface-mounted connection of valve assemblies, filters and shutoff taps.

Made of plated brass, with flat faced washer seal. Demountable fixing point fitting for ancillary products.

NEW

NEW

NEW

Press elbow 90° with male thread


16x½” MT 1014686 10

20x½” MT 1014729 10

20x¾” MT 1014732 10

25x¾” MT 1014751 5

25x1” MT 1014755 5

32x1” MT 1014770 5

40x1¼” MT 1046909 5

Made of plated brass, with fixed press sleeve. With BSP male-threaded adapter for screw connections.

17.97

23.25

37.65

44.94

9.52

10.30

11.07

11.67

12.46

16.50

20.83

25.50

26.72

31.50

28.75

33.44

5.37

8.15

8.54

11.00

11.85

15.98

25.59

2 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Plastic Press Fittings

Press elbow 90° with female thread


16x½” FT 1014692 10

20x½” FT 1014736 10

20x¾” FT 1014739 10

25x¾” FT 1014757 5

25x1” FT 1014761 5

32x1” FT 1014774 5

40x1½” FT 1046910 5

50x1½” FT 1046912 3

Made of plated brass, with fixed press sleeve. With BSP female-threaded adapter for screw connections.

Press elbow adaptor (swivel nut)


16x½” 1060090 10

20x½” 1060091 10

25x½” 1060092 5

NEW

Made of plated brass, with flat faced washer seal. Demountable fixing point fitting for ancillary products.

Press elbow 90°


12x12mm 1014648 10

16x16mm 1014679 10

20x20mm 1014724 10

25x25mm 1014746 5

32x32mm 1014765 5

40x40mm 1046908 5

50x50mm 1046911 3

Made of plated brass, with press sleeve.

5.72

7.53

9.18

11.16

12.37

16.79

23.97

27.79

9.50

12.00

13.50

4.79

4.83

6.54

10.56

15.42

22.49

32.97


Flexible Plum

bing & R

adiator Heating

Uponor MLC Plastic Press Fittings

Press coupling/reducer


12x12mm 1015152 10

16x12mm 1015159 10

16x16mm 1015164 10

20x16mm 1015179 10

20x20mm 1015187 10

25x16mm 1015194 5

25x20mm 1015202 5

25x25mm 1015205 5

32x20mm 1015215 5

32x25mm 1015217 5

32x32mm 1015219 5

40x25mm 1046930 5

40x32mm 1046931 5

40x40mm 1046932 5

50x32mm 1046933 3

50x40mm 1046934 3

50x50mm 1046935 3

Press tee


12x12x12mm 1014871 10

16x16x16mm 1014918 10

20x20x20mm 1014976 10

25x25x25mm 1015028 5

32x32x32mm 1015073 5

40x40x40mm 1046921 5

50x50x50mm 1046928 3



5.30

5.45

4.55

5.59

6.09

7.33

7.89

9.11

12.37

13.71

13.71

17.03

19.89

18.56

23.70

25.04

25.08

6.13

6.80

9.80

14.97

28.64

32.34

47.39

2 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng

AB

C

Press tee with reducer


A B C

16x12x12mm 1014909 10

16x12x16mm 1014910 10

16x20x16mm 1014923 10

20x16x16mm 1014957 10

20x16x20mm 1014961 10

20x20x16mm 1014970 10

20x25x16mm 1014981 10

20x25x20mm 1014983 10

25x12x25mm 1014994 10

25x16x16mm 1014996 5

25x16x20mm 1015000 5

25x16x25mm 1015002 5

25x20x16mm 1015015 5

25x20x20mm 1015017 5

25x20x25mm 1015021 5

25x32x25mm 1015033 5

32x16x32mm 1015053 5

32x20x32mm 1015060 5

32x25x25mm 1015064 5

32x25x32mm 1015068 5

32x50x32mm 1046915 5

40x20x40mm 1046916 5

40x25x32mm 1046917 5

40x25x40mm 1046918 5

40x32x32mm 1046919 5

40x32x40mm 1046920 5

50x25x40mm 1046924 3

50x25x50mm 1046925 3

50x32x50mm 1046926 3

50x40x50mm 1046927 3

Press elbow 45°


25x25mm 1014812 5

32x32mm 1014825 5

40x40mm 1046913 5

50x50mm 1046914 3




7.43

7.80

11.12

10.47

10.66

10.66

13.16

13.35

12.18

11.43

11.60

12.96

11.75

12.27

13.45

19.24

17.11

18.23

18.93

20.27

42.57

23.54

26.83

26.32

25.83

28.47

30.46

30.46

37.38

32.80

19.44

23.17

42.74

42.74


Flexible Plum

bing & R

adiator Heating


Repair coupling


25x25mm 1015212 5

32x32mm 1015226 5

40x40mm 1015239 5

Press tee with male thread


A B C

16x½” MTx16mm 1014927 10

25x¾” MTx25mm 1015038 5

32x¾” MTx32mm 1015082 5

Press tee with female thread


A B C

16x½” FTx16mm 1014931 10

20x½” FTx20mm 1014987 10

20x¾” FTx20mm 1014991 10

25x½” FTx25mm 1015044 5

25x¾” FTx25mm 1015048 5

32x½” FTx32mm 1015088 5

32x¾” FTx32mm 1015091 5

40x¾” FTx40mm 1046923 5

50x1” FTx50mm 1046929 3

Press Stop End


16mm 1007078 10

20mm 1007079 10

25mm 1007080 5

32mm 1007081 5

A B

C

B

C

A

Repair and compensation coupling, made of plated brass, with elongated press sleeve.

Made of plated brass, with press sleeve. Central BSP male-threaded adapter for screw connections.

Made of plated brass, with press sleeve. Central BSP female-threaded adapter for screwconnections.

36.22

41.95

45.87

10.68

20.40

25.18

13.54

15.39

16.25

17.36

18.72

20.85

23.56

25.80

31.30

3.16

3.46

4.04

8.06

2 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng

Pressure Test Plug


12mm 1013752 10

16mm 1013756 10

20mm 1013760 10

25mm 1013762 10

32mm 1013764 5

40mm 1013765 2


Reusable plug with ½“ FT designed for pressure-testing of Uponor MLC installations.

2.91

1.67

1.73

1.80

4.04

10.61


Flexible Plum

bing & R

adiator Heating

Uponor RS (Modular) System

Uponor RS Press Adapter MLC


RS 2-16 1059397 1

RS 2-20 1059396 1

RS 2-25 1029121 1

RS 2-32 1029122 1

RS 2-40 1046940 1

RS 2-50 1046941 1

RS 2-63 1029125 1

RS 2-75 1029126 1

RS 3-90 1029127 1

RS 3-110 1029128 1

NEW

NEW

SELECT THE BODY SIZE

‘RS2’(up to 75mm)

‘RS3’(for 90mm - 110mm)

OR

SELECT THE BODY CONNECTION TYPE

Tee 45o Elbow 90o Elbow Coupler Reducer

CHOOSE ADAPTERS TO SUIT CONNECTION

Adapter Female Thread Male Thread Flange

Your benefits:

Components with hundreds of fitting variations possible

Greater flexibility and lower logistics costs thanks to minimal number of system components

Optimum availability with less storage space and lower investment costs

Quick to install and can be pressed at the workbench

Uponor’s Riser (Modular) SystemUponor’s MLC RS Fittings Range is fast becoming the system of choice on many world-class projects. With just a small range of easy to install fittings, hundreds of connection possibilities can be created. The distinctive “click and lock” mechanism removes the need for overhead pressing allowing faster install times.

Made of tin plated brass with stainless steel sleeve. For connection of MLC to RS2/RS3 Bodies. Note: Pressing tool UP75 must be used for pressing all Modular Press Adapters. See page 109.

17.98

18.51

20.74

20.74

21.89

21.89

22.75

28.80

80.63

86.39

Uponor RS Elbow 90°


RS 2 1029138 1

RS 3 1029139 1

Uponor RS Elbow 45°


RS 2 1029140 1

RS 3 1029141 1

Uponor RS Coupling


RS 2 1029144 1

RS 3 1029145 1

Uponor RS Tee


RS 2 1029142 1

RS 3 1029143 1

Uponor RS Reducer


RS 3/RS2 1029146 1

2 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Made of tin plated brass. Includes 2 lock pins.




Made of tin plated brass. Includes 1 lock pin.


22.75

69.11

32.25

75.87

20.74

51.84

28.80

74.87

38.01


Flexible Plum

bing & R

adiator Heating


Uponor RS Male Adapter


RS 2 MT 1 ½” 1059402 1

RS 2 MT 2” 1029131 1

RS 2 MT 2 ½” 1029132 1

RS 3 MT 3” 1029133 1

Uponor RS Female Adapter


RS 2 FT ½” 1059403 1

RS 3 FT ½” 1059404 1

RS 2 FT 1” 1029134 1

RS 2 FT 2” 1029135 1

RS 2 FT 2 ½” 1029136 1

RS 3 FT 3” 1029137 1

Uponor RS Flange

DescriptionBolt

CircleBolt

Holes Code Qty Price each

RS 2 DN 65 (PN 6) 130 4 1059398 1

RS 2 DN 65 (PN 16) 145 4 1059399 1

RS 3 DN 80 (PN 6) 150 4 1059400 1

RS 3 DN 80 (PN 16) 160 8 1029129 1

RS 3 DN 100 (PN 6) 170 4 1059401 1

RS 3 DN 100 (PN 16) 180 8 1029130 1

Uponor RS Spacer


RS 2 170mm 1046477 1

RS 3 250mm 1046478 1

RS 2 5mm 1046750 1

RS 3 5mm 1046751 1

NEW

NEW

NEW

NEW

NEW

NEW

NEW

Made of tin plated brass. For connection to RS2/RS3 Bodies.




118.44

148.05

155.45

154.35

169.20

169.33

19.04

26.44

17.28

25.34

34.56

40.31

22.21

25.34

34.56

40.31

59.90

103.67

28.80

46.08

3 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Manifolds, Adapters & Accessories

Description uPoints Code Qty Price each

1 port extension set 1002189 1

2 port 1002190 1

3 port 300 1002191 1

4 port 350 1002192 1

5 port 400 1002193 1

6 port 450 1002194 1

7 port 500 1002195 1

8 port 600 1002196 1


1 port extension set 250 1002181 1

2 port 300 1002182 1

3 port 350 1002183 1

4 port 450 1002184 1

5 port 550 1002185 1

6 port 650 1002186 1

7 port 700 1002187 1

8 port 800 1002188 1

9 port 900 1048274 1

10 port 950 1048275 1

11 port 1050 1048276 1

12 port 1150 1048277 1


2 port ¾” 1002280 1

3 port ¾” 1002281 1

4 port ¾” 1002282 1

2 port 1” 1002284 1

3 port 1” 1002285 1

4 port 1” 1002286 1

The Uponor Vario B Manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet on nickel plated connections are ¾” Eurocone. Designed for use in Radiator systems.Note: Eurocone compression adapters are supplied separately.

The Uponor Vario B Manifold with valve includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use in Radiator systems.Note: Thermal actuators & Eurocone compression adapters supplied separately.

Supplied as a single manifold. Made of plated brass, ¾”or 1” MT x FT connections with ½” or ¾” MT outlets. Valves allow each circuit to be isolated. Delivered with loop labelling discs. Order adapters separately for connection to Uponor pipe (MLC/evalPEX). Manifolds can be joined to make the required number of ports.

uPoints




uPoints

250

Uponor Vario B ManifoldUponor NV Manifold

Uponor Vario B Manifold with valveLS Manifold

Uponor Manifold plated with valve LManifold L

16.30

23.21

32.30

18.14

27.81

35.07

55.46

85.49

114.33

136.39

158.22

180.04

202.20

225.50

91.74

108.75

146.29

179.30

213.10

245.59

280.59

314.87

347.03

378.28

409.68

441.76


Flexible Plum

bing & R

adiator Heating

Uponor MLC Manifolds, Adapters & Accessories


2 port 1” 1014107 1

3 port 1” 1014111 1

4 port 1” 1014109 1


¾”/1” 1002277 1


¾”MT x ¾”FT Supplied as a single valve. 1002279 1

1”FT x 1”MT Supplied in pairs. 1059132 1


¾” FT 1002275 1

Manifold P

Manifold L bracket

Manifold L ball valve

Manifold L end plug


¾” MT 1002273 20

1” MT 1002274 20

Manifold L end cap (with sealing washer)


1” 1014117 1

Manifold P bracket

Supplied as a single manifold. Made of plated brass, with 1”MT x 1”FT with ½”MT outlets. Order adapters separately for connection to Uponor pipe (MLCP/evalPEX). Manifolds can be joined to make the required number of ports.

Supplied as a single bracket. Holds manifolds in place at a vertical distance of 220mm apart.

Made of plated brass. Used to isolate the whole manifold assembly.

Made of plated brass, with sealing O-Ring.

Made of plated brass.

Supplied as a single bracket. Made of galvanized steel, for the sound absorbing installation of Manifold P.


7.40

2.08

20.06

25.36

15.14

21.46

26.37

3.42

3.42

9.35

3 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng MLC Manifolds, Adapters & Accessories

Manifold P cap (with sealing washer)


½” FT 1014120 20

1” FT 1014121 20

Manifold Connection Fitting with Thermometer and Airvent


AAV & Thermometer Gauge 1046886 2

Automatic Manifold By-Pass


Manifold by-pass between flow and return 1048278 1


16x¾”FT 1058090 1

20x¾”FT 1058092 1

25x¾”FT 1058093 1

BSP compression adapters (MLC)


12x½” FT 1013831 1

16x½” FT 1058086 1

20x½” FT 1058088 1

Made of plated brass, for use with Manifold P.

For connection to Vario B (LS/TM) Manifold. Can be fitted to left or right hand side of manifold.Supplied in pairs.

Preset to 0.25 bar. For connection between flow and return manifold Vario B (LS/TM). Complete with isolation valve for filling purposes.

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT manifolds outlets Vario B (NV/LS/TM) and manifold L.

Made of plated brass. For use with Manifold L/P.

Uponor MLC Eurocone compression adapters (MLC)Eurocone compression adapters (MLCP)

2.63

4.34

3.48

4.11

8.36

63.15

4.34

2.66

5.99

29.91


Flexible Plum

bing & R

adiator Heating




Uponor MLC Radiator & Tapwater Terminations/Accessories

Press connection elbow


12x75mm Chrome 1014644 20

16x250mm Copper 1044852 20

16x350mm Chrome 1015626 20

16x1100mm Chrome 1015631 20

Press connection tee


16x350x16mm 1015628 20

Danfoss connection set


16x½” MT 1013970 20

Chromed radiator compression elbow


15x20mm MT 1002124 10

Robust press radiator connection elbow with 15mm plated or copper spigot (for compression jointing only).

Robust press radiator connection tee with 15mm bent plated copper spigot (for compression jointing only).

Made of plated brass, male-threaded pressure screw. With insert part and clamp ring, with blue O-ring, suitable for use with female-threaded Danfoss radiator valves.

Plated brass elbow with 15mm plated brass spigot for connecting MLC to radiators with suitable compression adapters (12mm : 1013813, 16mm : 1013806).

Press Lever Ball Valve


16mm 1046603 6

20mm 1046604 6

25mm 1046605 6

32mm 1046606 6

40mm 1046607 4

50mm 1046608 4

63mm 1046609 2

Fully assembled and sealed lever valve c/w press adapters to MLC.

7.72

9.97

10.92

21.86

17.15

3.16

6.64

23.68

32.63

36.19

48.94

91.75

106.25

181.47

3 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Radiator & Tapwater Terminations/Accessories

Manthorpe Radiator Pipe Guide and Seal


12mm 1046371 1

Snap ring


12mm 1011368 50

15/16mm 1011370 50

20mm 1011372 50

Compression adapter (MLC)


12x15mm Chrome 1013813 20

16x15mm Brass 1013805 10

16x15mm Chrome 1013806 10

20x22mm Brass 1013807 10

25x28mm Brass 1013808 10

MLC/copper adapter fittings


16x15mm 1014517 10

20x22mm 1014556 10

25x22mm 1014582 10

25x28mm 1014587 10

32x28mm 1014605 10

For use with 12mm MLC and evalPEX as a seal when exiting the wall behind radiators.

Clip-on snap ring made of Polypropylene, available in white only.

For adaption of MLC to compression fitting bodies. Note, threads must be checked.

Press sleeve and brass spigot for connecting MLC to copper compression fittings (brass spigot is not suitable for solder connections). NB. A suitable copper olive must be used.

3.55

1.95

2.12

3.58

7.79

4.28

5.71

6.83

10.78

12.28

8.45

0.25

0.26

0.26


Flexible Plum

bing & R

adiator Heating

For Uponor Tap Water SystemSmart End Elbow Range

U-Tap Elbow

Tap Elbow

U-Tap Elbow Mixer

Fix bracket

Position and fix smart end

Fix pipe

Plug and test

Finish wall

Add extensions if required

Add tap connector

1

2

3

4

5

6

7

NEW

NEW

NEW

Quick & Easy

Page 50Press

Page 36RTM™

Page 16

NEW

NEW

Page 50Quick & Easy

Press

Page 36RTM™

Page 16

Press

Page 36

NEW

Quick & Easy

Page 50

3 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Smart End and Accessories


16x½” FT x16 1015454 5

16x½” FT x20 1060098 5

20x½” FT x16 1060097 5

20x½” FT x20 1060096 5

Press Tap U Elbow

Wall plate elbow


16x½” 1015345 10

20x¾” 1015515 5

20x½” 1015512 10

25¾” 1048471 5

16x½” XL 1046332 10

20x½” XL 1046333 10

Made of plated brass, with fixed press sleeve and Smart End flange. XL denotes extended length body.

NEW

NEW

NEW



½” MTx16x16 1060105 5

¾” MTx20x20 1060108 5

Press U-tap elbow mixer NEW

For use with MLC Smart End mounting brackets. See page 35. Use with in wall mixers.


½” FT x ½” FT 1072100 2

Flexible hose NEW

Used with isolation angle valve.


½” MT x 10/3/8” MT 1072098 2

½” MT x 12/½” MT 1072099 2

Isolation angle valve NEW

Uponor Smart End angled isolation valves complete with isolation. With threaded adaptation on the outlet. Made of chrome.

16.92

21.00

21.00

21.00

10.79

10.50

8.04

11.10

16.62

18.46

27.50

32.50

6.99

5.99

5.99


Flexible Plum

bing & R

adiator Heating

Uponor MLC Smart End and Accessories

Mounting Plate


75/150mm 1057840 5

Mounting Angle


75/150mm 1057842 5

Mounting Track


2000mm 1057844 10

For use with Smart End wall elbows. Designed for on-wall mounting. Allows tap connections with 75mm or 150mm spacings. Supplied with 2 insert pins and screws per plate.

For use with Smart End wall elbows. Designed for in-wall mounting and flush finish. Allows tap connections with 75mm or 150mm spacing. Supplied with 2 inserts pins and screws per angle.

For use with Smart End wall elbows, on-wall or in-wall construction, with mounting steps every 75mm.

1.84

3.60

12.88

3 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor MLC Smart End and Accessories


Set contains 10 insert pins and 10 screws 1057847 1


Set contains shroud, baffle, insert pin and screw 1057846 1

U-tap elbow sound protection set


16mm 1060367 1

Insert Pins and Screws for Mounting Track

Sound Protection Set

For sound insulation of a pair of Smart End elbows. Contains shroud, baffle, insert pin and screw.

For attachment of Smart End wall elbows to mounting plate/angle/track. Set contains 10 insert pins and 10 screws.


NEW

Inlet piece


½” x ¾ x 75mm 1036151 1

Use with Smart End in wall mixer conecting nipple.

NEW




6.99

4.23

10.15

6.99


Flexible Plum

bing & R

adiator Heating

Uponor EvalPEX Plumbing System


16x1.8mm 1058803 75m

20x1.9mm 1058804 48m

25x2.3mm 1058805 30m


16x1.8mm 200 1059173 50m

16x1.8mm 350 1059182 100m

16x1.8mm 700 1059183 200m

16x1.8mm 1750 1058802 500m

20x1.9mm 250 1059174 50m

25x2.3mm 300 1059175 50m


16mm - Red 250 1059179 50m

16mm - Blue 250 1059176 50m

20mm - Red 300 1059180 50m

20mm - Blue 300 1059177 50m

25mm - Red 350 1059181 50m

25mm - Blue 350 1059178 50m

For more information visitwww.uponor-qe.com

NEW

Shrink-FitTM

PLUMBING SYSTEM

FAST, SECURE,

CONNECTS IN

SEC NDSFor more information visit

www.uponor-qe.com

NEW

Shrink-FitTM

PLUMBING SYSTEM

FAST, SECURE,

CONNECTS IN

SEC NDS

Diffusion-resistant EvalPEX pipes, five-layer (evalPEX – adhesive agent – oxygen barrier – adhesive agent – evalPEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.

Diffusion-resistant EvalPEX pipes, five-layer (evalPEX – adhesive agent – oxygen barrier – adhesive agent – evalPEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.

Uponor pipe-in-pipe system is designed to be integrated into the building structure and to be covered by screeds. Pipe can be withdrawn without damage to the building structure. Uponor pipe-in-pipe complies with the requirements of the Water Regulations 1999.

EvalPEX Pipe white, supplied in 3m straight lengthsPEX Pipe white, supplied in 3m straight lengths

EvalPEX Pipe white, supplied in coilsPEX Pipe white, supplied in coils

EvalPEX Pipe-in-PipePEX Pipe-in-Pipe

uPoints

200

uPoints

250

1.84

3.48

4.58

2.81

2.81

2.48

3.48

3.96

3.96

1.67

1.67

1.67

1.67

3.25

4.56

4 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng


25 Black (16mm) 1012860 50m

34 Black (20mm) 1012864 50m

42 Black (25mm) 1012872 25m


16mm Red 1058010 20

16mm Blue 1058013 20

16mm White 1057453 20

20mm Red 1058011 20

20mm Blue 1058014 20

20mm White 1057454 20

25mm Red 1058012 20

25mm Blue 1058015 20

25mm White 1057455 20


16mm 1008669 5

20mm 1008932 5

25mm 1008671 5


16mm 1008679 5

20mm 1008680 5

25mm 1008681 5


16mm 1008684 5

20mm 1008685 5

25mm 1008686 5

Uponor Q&E PEX Plumbing System

Must be used on all Uponor Q&E PEX plumbing system joints.

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.

Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of sizes of conduit are available on request. First number shown in description refers to O.D. of the protective tube. The second is the size of evalPEX pipe suitable. N.B. Does not include evalPEX Pipe.

EvalPEX conduitPEX conduit

Q&E ringsUponor Q&E PEX rings

Q&E CouplingCoupling

Q&E Elbow 90oElbow 90o

Q&E Equal TeeEqual Tee

0.91

1.15

1.97

0.24

0.24

0.24

0.30

0.30

0.30

0.36

0.36

0.36

1.10

1.55

2.35

1.08

1.72

3.37

1.60

2.32

3.89


Flexible Plum

bing & R

adiator Heating






A B C16x20x16mm 1008710 5

20x16x16mm 1008700 5

20x16x20mm 1008689 5

20x20x16mm 1008697 5

20x25x20mm 1008711 5

25x16x16mm 1008702 5

25x16x20mm 1008699 5

25x16x25mm 1008690 5

25x20x16mm 1008701 5

25x20x20mm 1008703 5

25x20x25mm 1008691 5

25x25x20mm 1001420 5


A B C

16x½”x16mm 1042338 5

20x½”x20mm 1042339 5

25x½”x25mm 1042340 5

25x¾”x25mm 1042341 5


16x½” MT 1008661 5

20x½” MT 1008662 5

20x¾” MT 1008663 5

25x¾” MT 1008664 5

25x1” MT 1008665 5

B

CA

B

C

A


16x½” FT 1042329 5

20x½” FT 1042330 5

20x¾” FT 1042331 5

25x¾” FT 1042332 5

25x1” FT 1042333 5

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.

Made from Engineered Plastic (PPSU).

Uponor PEX plumbing system on one end. With BSP male-threaded adapter for screw connections.

Uponor PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.

Q&E Tee with reducerTee with reducer

Q&E Female centre teeFemale centre tee

Q&E Male thread adapterMale thread adapter

Q&E Female thread adapterFemale thread adapter

2.60

2.60

2.60

3.00

3.92

3.92

3.92

3.92

3.92

3.92

3.60

4.50

3.80

4.79

5.99

6.30

2.88

3.36

3.36

3.59

5.50

3.90

4.90

5.04

6.00

10.80

4 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng


16x½” FT 1038021 1

20x½” FT 1038022 1

20x¾” FT 1038023 1

25x¾” FT 1038024 1

25x1” FT 1038025 1


16x½” 1042342 5

20x½” 1042343 5


20x16mm 1008674 5

25x16mm 1008675 5

25x20mm 1008676 5


16x½” FT 1042334 5

20x½” FT 1042335 5

20x¾” FT 1042336 5

25x¾” FT 1042337 5

Uponor Q&E PEX plumbing system on one end. With BSP female-threaded adapter for screw connections. Washer included.

Uponor Q&E PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.

Uponor Q&E PEX plumbing system on both ends.

Uponor Q&E PEX plumbing system on one end. With BSP female-threaded adapter for screw connections.


Q&E Tap connector straightTap connector straight

Q&E Wall plate elbowWall plate elbow

Q&E ReducerReducer

Q&E Elbow 90o with female threadElbow 90o with female thread


16x½” MT 1008666 5

25x¾” MT 1008668 5

Uponor Q&E PEX plumbing system on one end. With BSP male –threaded adapter for screw connections.

Q&E Elbow with male thread




4.79

5.16

5.99

7.19

8.39

3.59

5.99

5.99

5.99

1.50

2.40

3.00

4.79

5.51

2.82

4.34


Flexible Plum

bing & R

adiator Heating


16x½” FT 1038037 1

20x½” FT 1038038 1

20x¾” FT 1038039 1

25x¾” FT 1038040 1

Uponor Q&E PEX plumbing system on one end. With BSP female-threaded adapter for screw connections. Washer included.

Q&E Tap connector elbow 90oTap connector elbow 90o



¾”x16x16x16mm 1008714 1

¾”x20x16x16mm 1008716 1

¾”x16x16x16x16mm 1008715 1

¾”x20x16x16x16mm 1008717 1


25/20x16x16mm 1008720 1

25/20x16x16x16mm 1008721 1

25/16x16x16mm 1008718 1

25/16x16x16x16mm 1008719 1


20/20x16x16mm 1008722 1

20/20x16x16x16mm 1008723 1

25/20x16x16mm 1008724 1

25/20x16x16x16mm 1008725 1


¾” 1001338 2

Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings



For use with Manifold H PEX. Not suitable for use with modular manifolds.

Q&E Manifold PEX (PPSU), BSP inletManifold PEX (PPSU), BSP inlet

Q&E Manifold PEX (PPSU), Q&E inletManifold PEX (PPSU), Q&E inlet

Q&E Manifold H PEX (PPSU), Q&E inletManifold H PEX (PPSU), Q&E inlet

Q&E Manifold PEX bracketsManifold PEX brackets

5.16

5.99

7.19

9.59

8.39

8.76

8.39

8.76

8.76

8.76

8.39

8.76

4.79

4.79

5.50

6.00

6.60

4 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati

ng Uponor Q&E PEX Plumbing System


¾” 1048002 1


¾” 1048003 1


1” 1048004 1

1” c/w air nipple 1048005 1


2x16 1047999 1

3x16 1048000 1

4x16 1048001 1

Made from Engineered Plastic (PPSU). For straight adaption from Modular manifold, BSP thread.

Made from Engineered Plastic (PPSU). For 90 degree adaption from Modular manifold, BSP thread.

Made from Engineered Plastic (PPSU), c/w with Uponor Q&E outlets


1xG½” 1047997 1

1xG¾” 1047998 1

Made from Engineered Plastic (PPSU), c/w BSP outlets

Q&E Modular manifold c/c 50Modular manifold c/c 50

Q&E Modular manifold Q&E c/c 50Modular manifold Q&E c/c 50

Q&E Modular straight connectionModular straight connection

Q&E Modular elbow connection Modular elbow connection

Q&E Modular end cap Modular end cap


1” 1048007 1

Bag includes two wall brackets, two long - and two short clips.

Q&E Modular manifold wall bracketModular manifold wall bracket

7.19

7.19

4.79

11.99

9.59

10.79

14.39

8.40

9.20

6.60


Flexible Plum

bing & R

adiator Heating






½” MT 1008281 25


16x15mm 1023040 5

20x22mm 1047941 5

25x22mm 1023042 5

25x28mm 1047942 5

Compression adapters (PEX Pipe)


16x½” FT 1058934 1

20x½” FT 1058935 1

Manifold adapters (PEX Pipe)


16x½” FT 1059510 1

20x½” FT 1059511 1

Eurocone compression adapters (PEX Pipe)


16x¾”FT 1057368 1

20x¾”FT 1057370 1

For sealing off Uponor 1/2” outlets during pressure testing

To adapt to Uponor Q&E PEX pipe from copper. Allow to cool before making Q&E joint.

Brass compression fitting to be used in conjunction with standard 15mm compression fitting bodies. Compatibility of threads must be checked.

Made of plated brass. For use with Manifold L/P.

Made of brass, ¾”FT Eurocone thread for connection to ¾”MT outlets of Vario B (NV/LS/TM) Manifolds.

Q&E Blanking plugBlanking plug

Q&E Copper adapterCopper adapter

Q&E adapter


16x15mm 1008734 1

20x22mm 1008736 1

To adapt to Uponor Q&E PEX pipe from copper commpression. Allow to cool before making Q&E joint. *Not suitable for push fit type joints.

NEW

1.80

1.80

4.08

3.59

4.79

2.56

6.23

2.56

6.13

6.13

6.97

1.95

3.55

4 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati



16x300mm 1023045 2

Single bend guide plastic


Single bend guide, PEX 16mm pipe-in-pipe 1009008 1

Snap ring


15/16mm 1011370 50

Pipe clips


12mm 1013141 100

15/16mm 1013142 100

20mm 1013144 50

22/25mm 1013145 50

28/32mm 1013146 50

40mm 1013147 25


16x200mm 1042320 1

Uponor Q&E PEX plumbing system on one end. Chrome plated brass elbow with 15mm spigot for connection to radiators.

Used to curve and protect Uponor evalPEX 16mm pipe-in-pipe up out of the floor leaving only the Uponor evalPEX 16mm pipe exposed through the floor. Protects the pipe below floor level. Price refers to single bend guide.

Clip-on snap ring made of Polypropylene, available in white only.

Pipe clips made of white plastic.

For easy first fix installation of radiators. After pressure testing, cut off stop end, then make connection.

Q&E Radiator Connection pipe c/w stop endRadiator Connection pipe c/w stop end

Q&E Radiator connection elbowRadiator connection elbow




11.99

5.62

0.26

0.52

0.52

0.67

0.85

1.67

2.08

7.19


Flexible Plum

bing & R

adiator Heating


Radiator connection guide (solid floor)


12/16mm 1002237 1

Radiator connection guide (joisted floor)


12/16mm 1002238 1


16x ½” FT 1048622 10

Radiator connection pipe


½” MT x 250mm 1002033 1

½” MT x 350mm Chrome plated 1015425 20

½” MT x 1100mm Chrome plated 1015428 20

NEW

NEW

NEW

Robust bend support and white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.

Robust white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.

To be used with 16x ½” FT 90˚ elbow (item 1042334) and radiator connection pipe.

15mm copper x ½” BSP MT to connect radiator to termination box.

Q&E Termination BoxTermination Box

17.80

16.78

3.00

8.39

8.50

19.20

4 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati


Uponor PEX insert spares


15mm 1002034 1

22mm 1002035 1

28mm 1002036 1

PEX Pipe bend supports


Metal

15mm/16mm 1009004 1

20mm 1009233 1

25mm 1009006 1

28-34mm 1001231 1

Chromed Upstand Pipe Pack (750mm)


12/16mm 1002239 1

Chromed Upstand Pipe Pack (250mm)


12/16mm 1002240 1

For use with Uponor PEX plumbing in old sizes 15x1.5, 22x2.0, 28x2.6mm. Allows modification and repairs in conjunction with standard compression fitting.

These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.

Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.

Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.

1.59

2.47

3.29

3.94

0.57

1.08

0.79

26.43

14.59


Flexible Plum

bing & R

adiator Heating


Single plugged hook


60mm 1013137 50

80mm 1013138 50

Twin plugged hook


60mm 1013139 50

80mm 1013140 50

For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.

For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.


Set contains 10 insert pins and 10 screws 1057847 1

For attachment of Smart End wall elbows to mounting plate/angle/track. Set contains 10 insert pins and 10 screws.


Set contains shroud, baffle, insert pin and screw 1057846 1



U-tap elbow sound protection 1060367 1


Insert Pins and Screws for Mounting Track

Sound Protection Set

U-tap elbow Sound Protection Set NEW

0.31

0.31

0.34

0.34

4.23

10.15

6.99

5 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Flex

ible

Plu

mbi

ng &

Rad

iato

r H

eati


Q&E TOOL DEALS MLCP TOOL DEALS

Contact your Uponor representative or speak

to your local plumbers or builders merchant today

for more details.

www.uponor.co.uk

Mini 32 Pressing Tool for MLCP

1007096

Milwaukee Expander Tool Set

1057166

Tools & Accessories section, page 112

Q&E Tap elbow


16½” FT 1059822 5

20½” FT 1059823 5


Q&E U-tap elbow


16½” FTx16 1059820 5

20½” FTx20 1059821 5


Q&E U-tap elbow mixer


16½” MTx16 1060344 5


NEW

NEW

NEW

5.90

6.90

21.00

27.00

33.00

Ecoflex (Pre-Insulated) Pipe System

Over 30 years service life, designed especially for heating water (Thermo), hot tap water (Aqua) and cooling water (Supra). Applications for district heating and cooling, remote boilers, biomass, CHP and industrial fluids. High flexibility, no special tools required and available ‘cut-to-length.’

• Ecoflex Pipe System Guide 52

• Ecoflex Pipe 54

• Ecoflex End Caps 57

• Wipex fittings 58

• Ecoflex Accessories 61

5 1

Ecoflex (P

re-Insulated) Pipe System

5 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecoflex (Pre-Insulated) Pipe Systems - Easy as 1, 2, 3!

Order Code Description

Stage 1 Stage 2 Stage 3

Pick your application pipe and length... Pick your End cap, one for each end... Pick your coupler. . .

Order Code Description Order Code Description

WIPEX Coupling, 6 bar / 95°C

Rubber end-capThermo Single 1018315 25+32/140 1018315 25+32/1401018313 32+40+50/1751018313 32+40+50/1751018312 63+75/1751018310 75+90+110/2001018310 75+90+110/2001018310 75+90+110/200

1018328 25x1” 6B1018329 32x1” 6B1018330 40x1¼” 6B1018331 50x1¼” 6B1018332 63x2” 6B1018333 75x2” 6B1018334 90x3” 6B1018335 110x3” 6B

1018134 2x25/1751018135 2x32/1751018136 2x40/1751018137 2x50/2001018138 2x63/200

Thermo Twin Rubber end-cap 1018309 2x 25+32+40/175 1018309 2x 25+32+40/1751018309 2x 25+32+40/1751018307 2x 40+50+63/2001018307 2x 40+50+63/200


1018328 25x1” 6B1018329 32x1” 6B1018330 40x1¼” 6B1018331 50x1¼” 6B1018332 63x2” 6B

Thermo Mini 1018132 25/681018133 32/68

Rubber end-cap 1018316 25+32/68 1018316 25+32/68


1018328 25x1” 6B1018329 32x1” 6B

Aqua Single 1018117 25/140 1018118 32/1401018119 40/1751018120 50/1751018121 63/175

1018315 25+32/140 1018315 25+32/1401018313 32+40+50/1751018313 32+40+50/1751018312 63+75/175

Rubber end-cap WIPEX Coupling, 10 bar / 95°C

1018336 25x1” 10B1018338 32x1” 10B1018339 40x1¼” 10B1018340 50x1¼” 10B1018341 63x2” 10B

Quattro 1018147 2x25/25+25/175

1018148 2x32/25+25/175

1018149 2x32/32+25/175

1018306 175 Quattro

1018306 175 Quattro

1018306 175 Quattro

Rubber end-cap WIPEX Coupling, 6 bar & 10 bar

1018328 25x1” 6B 1018336 25x1” 10B

1018329 32x1” 6B 1018336 25x1” 10B

1018329 32x1” 6B 1018338 32x1” 10B1018336 25x1” 10B

Supra/Supra Plus

1018124 25/681018125 32/681018126 40/1401018127 50/1401018128 63/1401018129 75/1751018130 90/1751018131 110/200

Plasson couplingRubber end-cap 1018316 25+32/68 1018316 25+32/681018314 40+50+63/1401018314 40+50+63/1401018314 40+50+63/1401018312 63+75/1751018311 90+110/1751018310 75+90+110/200

1018400 25x¾”1018401 32x1”1018402 40x1¼”1018403 50x1½”1018404 63x2”1018405 75x2½”1018406 90x3”1018407 110x4”

Aqua Twin 1018139 25+25/175

1018140 32+25/175

1018141 40+25/175

1018142 50+25/175

1018309 2x 25+32+40/175

1018309 2x 25+32+40/175

1018309 2x 25+32+40/175

1018308 2x 25+32+50/175

Rubber end-cap WIPEX Coupling, 10 bar / 95°C

1018336 25x1” 10B

1018338 32x1” 10B1018336 25x1” 10B

1018339 40x1¼” 10B1018336 25x1” 10B

1018340 50x1¼” 10B1018336 25x1” 10B

1018109 25/140 1018110 32/1401018111 40/1751018112 50/1751018113 63/1751018114 75/2001018115 90/2001018116 110/200

from heat source... ...to buildingEcofl ex(Pre-Insulated)Pipe SystemsConnecting you to renewable heat

Over 30 million metres installed worldwide!

Uponor Ecofl ex (pre-insulated) Pipes - the only choice for economical transport of hot and cold fl uids for both domestic and commercial applications.

Besides excellent insulating effi ciency, our light weight Ecofl ex (pre-insulated) pipes offer fl exibility, ease of installation and a service life in excess of 25 years.

Applications:• Remote boilers• Biomass• CHP• District heating• District cooling

Suitable for:• Heating water• Hot tap water• Cooling water• Industrial fl uids

Solutions for:• Family homes• Social housing• Farm buildings• Smallholdings• Outbuildings

The Advantages:• Easy to handle, light weight and highly fl exible• Easy to assemble, no special tools required• Rapid work progress, up to 200m joint free installation• Cut to length service, delivered directly to site• Full design service, pipe sizing and material take-offs• Load bearing, up to 60 tonnes at 0.5m depth

No special tools, no welding and no fuss. Quality product, long lifetime.

Ecofl ex Thermo Single

25 - 110mm

Ecofl ex Thermo Twin

25 - 63mm

Ecofl ex Quattro

25/32mm

Ecofl ex Thermo Mini

25 and 32mm

5 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecofl

ex

Pip

e Sy

stem

(P

re-I

nsul

ated

)


25/68 1200 per10m 1018132 200

32/68 1200 per10m 1018133 200


25/140 1200 per10m 1018109 200

32/140 1200 per10m 1018110 200

40/175 1200 per10m 1018111 200

50/175 1200 per10m 1018112 200

63/175 1200 per10m 1018113 200

75/200 1200 per10m 1018114 100

90/200 1200 per10m 1018115 100

110/200 1200 per10m 1018116 100


2x25/175 1200 per10m 1018134 200

2x32/175 1200 per10m 1018135 200

2x40/175 1200 per10m 1018136 200

2x50/200 1200 per10m 1018137 100

2x63/200 1200 per10m 1018138 100


25/140 1000 per10m 1018117 200

32/140 1000 per10m 1018118 200

40/175 1000 per10m 1018119 200

50/175 1000 per10m 1018120 200

63/175 1200 per10m 1018121 200

Uponor Ecofl ex (Pre-Insulated) Pipe

Ecoflex Single pipe PEX, max. 6 bar / 95°C heating. Use Wipex 6 bar coupling.

Ecoflex Single pipe PEX, max. 6 bar / 95°C heating. Also available with heat trace cable on request. Use Wipex 6 bar coupling.

Ecoflex Twin pipe PEX, max. 6 bar / 95°C heating. Use Wipex 6 bar coupling.

Ecoflex Single pipe PEX, max. 10 bar / 95°C warm water. Also available with heat trace cable on request. Use Wipex 10 bar coupling. Sizes 75mm, 90mm and 110mm available on request for large projects.




uPoints

1200 per10m

uPoints

1200 per10m

uPoints

1200 per10m

uPoints

1000 per10m

Ecofl ex Thermo MiniThermo Mini

Ecofl ex Thermo SingleThermo Single

Ecofl ex Thermo TwinThermo Twin

Ecofl ex Aqua SingleAqua Single

23.4327.15

35.42

38.47

50.46

54.01

61.21

83.38

93.80

111.70

48.54

55.18

59.50

81.30

98.14

36.74

40.95

54.35

63.85

73.56


Ecofl ex Pipe System

(Pre-Insulated)



25+25/175 1000 per10m 1018139 200

32+25/175 1000 per10m 1018140 200

40+25/175 1000 per10m 1018141 200

50+25/175 1000 per10m 1018142 200


Thermo Aqua

2x25/25+25/175 1200 per10m 1018147 200

2x32/25+25/175 1200 per10m 1018148 200

2x32/32+25/175 1200 per10m 1018149 200

Ecoflex Twin pipe PEX, max. 10 bar / 95°C warm water. Use Wipex 10 bar coupling.

Ecoflex Quattro pipe PEX, max. 6 bar and 10 bar / 95°C, heating / warm water. (Contains 2 x Thermo Pipes and 2 x Aqua Pipes).


uPoints

1000 per10m

uPoints


25/68 1000 per10m 1018124 200

32/68 1000 per10m 1018125 200

40/140 1000 per10m 1018126 200

50/140 1000 per10m 1018127 200

63/140 1000 per10m 1018128 200

75/175 1000 per10m 1018129 100

90/175 1000 per10m 1018130 100

110/200 1000 per10m 1018131 100

Order to leadtime direct from Germany. Ecoflex Single pipe PE-HD, max. 16 bar / 20°C chilled water. Potable Water. Use Plasson coupling or Wipex 6 bar Coupling.

uPoints

1000 per10m

Ecofl ex Aqua TwinAqua Twin

Ecofl ex QuattroQuattro

Ecofl ex SupraSupra

71.64

78.66

82.25

52.21

55.30

60.42

68.52

22.21

22.92

48.25

50.66

55.09

53.55

57.90

79.95

5 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecofl

ex

Pip

e Sy

stem

(P

re-I

nsul

ated

)



25/68 1000 per10m 1048902 150

32/68 1000 per10m 1048903 150

40/140 1000 per10m 1048904 150

50/140 1000 per10m 1048905 150

63/140 1000 per10m 1048906 150

75/175 1000 per10m 1048907 100

90/175 1000 per10m 1048908 100

110/200 1000 per10m 1048909 100

Supra Plus - Don’t freeze up this winter!

• Built in anti-freeze cable to protect cold water lines

• Lengths up to 150m possible

• Easy to use control unit

Ecoflex, Single PE-HD pipe for chilled potable water, complete with freeze protectioncable.

uPoints

1000 per10m

Ecofl ex Supra PlusSupra Plus

43.65

44.36

69.68

72.11

76.54

77.34

79.32

101.38


Ecoflex P

ipe System (P

re-Insulated)

Uponor Ecoflex (Pre-Insulated) Pipe




Ecoflex Rubber end-cap setRubber end-cap set

Ecoflex Rubber end-cap setRubber end-cap set

Ecoflex end-capEnd Cover


Twin40+50+63/200 1018307 1

Twin25+32+50/175 1018308 1

Twin25+32+40/175 1018309 1


75+90+110/200 1018310 1

90+110/175 1018311 1

63+75/175 1018312 1

32+40+50/175 1018313 1

40+50+63/140 1018314 1

25+32/140 1018315 1

25+32/68 1018316 1


140mm 1045310 1

175mm 1045311 1

200mm 1045312 1


Quattro 1018306 1

For above ground termination inside a building. Suitable for Single, Twin and Quattro pipes.

43.44

45.63

44.55

40.42

45.19

56.93

41.51

41.51

34.57

34.15

25.59

25.43

28.15

33.95

5 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecofl

ex P

ipe

Syst

em (

Pre

-Ins

ulat

ed)

Uponor Wipex Fittings



25x1” 1018336 1

32x1” 1018338 1

40x1¼” 1018339 1

50x1¼” 1018340 1

63x2” 1018341 1

WIPEX Jointing Equal PN6


25mm 1042972 1

32mm 1042973 1

40mm 1042980 1

50mm 1042984 1

63mm 1042981 1

75mm 1042985 1

90mm 1042986 1

110mm 1042987 1



25x1” 1018328 1

32x1” 1018329 1

40x1¼” 1018330 1

50x1¼” 1018331 1

63x2” 1018332 1

75x2” 1018333 1

90x3” 1018334 1

110x3” 1018335 1

Used with the following piping systems: Aqua Single, Aqua Twin and Quattro.Compression fitting with male thread for connection.

Single fitting for joining two lengths of pipe together. For: Thermo Single, Thermo Twin, Thermo Mini, Quattro and Supra.

Used with the following piping systems: Thermo Single, Thermo Twin, Thermo Mini Quattro and Supra. Compression fitting with male thread for connection.

21.94

24.12

31.68

42.55

72.48

100.59

143.96

179.25

31.15

38.51

49.64

74.97

122.92

183.52

252.84

351.69

22.78

25.50

31.71

44.08

69.44


Ecoflex P

ipe System (P

re-Insulated)


WIPEX 90° bend


1” 1018350 1

1¼” 1018351 1

2” 1018352 1

3” 1018353 1

WIPEX Jointing Equal PN10


25mm 1042970 1

32mm 1042974 1

40mm 1042979 1

50mm 1042983 1

63mm 1042982 1

WIPEX T-piece


1” 1018345 1

1¼” 1018346 1

2” 1018347 1

3” 1018348 1

WIPEX Joint


1” 1018355 1

1¼” 1018356 1

2” 1018357 1

3” 1018358 1

Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

Single fitting for joining two lengths of pipe together. For Aqua Single, Aqua Twin and Quattro.



30.90

39.70

49.68

75.47

123.15

23.09

26.19

53.20

123.42

19.52

24.43

57.99

106.97

13.29

18.08

33.52

48.39

6 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecofl

ex P

ipe

Syst

em (

Pre

-Ins

ulat

ed)


WIPEX Flange

WIPEX Reducer


1¼”x1” 1018368 1

1½”x1¼” 1018369 1

2”x1” 1018371 1

2”x1¼” 1018372 1

3”x1” 1018374 1

3”x1¼” 1018375 1

3”x2” 1018376 1

Plasson coupling (to be used with Supra Pipe only)


25x¾” 1018400 1

32x1” 1018401 1

40x1¼” 1018402 1

50x1½” 1018403 1

63x2” 1018404 1

75x2½” 1018405 1

90x3” 1018406 1

110x4” 1018407 1

WIPEX double union


1”x1” 1018322 1

1¼”x 1¼” 1018323 1

2”x 2” 1018324 1

3”x 3” 1018325 1

DescriptionBolt

CircleBolt

Holes Code Qty Price each

1” 85 4 1018359 1

1¼” 100 4 1018360 1

2” 125 4 1018362 1

3” 160 8 1018364 1



For connecting wipex bodies together when installed in a chamber or H insulation set.

51.61

71.01

136.17

156.34

15.10

15.10

39.51

32.75

75.27

59.18

59.70

9.98

13.35

22.32

32.87

43.60

81.78

156.41

186.47

6.52

9.41

22.43

29.45


Ecoflex P

ipe System (P

re-Insulated)

Uponor Ecoflex (Pre-Insulated) Pipe Accessories

Description Old Code New Code Qty Price each

200/175/140 1021991 1060985 1


200/175/140 1021990 1060982 1


ONE SIZE 1007355 1


200/175/140 1021992 1060984 1

For sealing elbow connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel bolts, and sealant.Only to be used with Uponor rubber end caps!

For sealing T-connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel bolts and sealant.Only to be used with Uponor rubber end caps!

For sealing connections of single main lines (flow and return) to twin outlet lines in the trench. Comprises insulating half-shells, stainless steel screws, plastic dowels and sealant.Only to be used with Uponor rubber end caps!

For sealing straight connections of Single and Twin pipes in the trench.Comprises insulating half-shells, stainless steel bolts and sealant.Only to be used with Uponor rubber end caps!

Ecoflex Elbow insulation setElbow insulation set

Ecoflex T-insulation setT-insulation set

Ecoflex ‘H’ insulation set‘H’ insulation set

Ecoflex straight insulationStraight insulation set

NEW

NEW

NEW


200/68 1007357 1060991 1

Used with 25mm and 32mm Ecoflex Thermo Mini and Supra pipes when connecting into insulation sets.

NEW

Ecoflex Reducer ringReducer ring




New Code

278.74

613.29

377.27

324.78

27.75

6 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ecofl

ex P

ipe

Syst

em (

Pre

-Ins

ulat

ed)

Ecoflex (Pre-Insulated) Pipe Fittings, Components and Accessories

Reducer rings


140/68 1007357 1


68/90 1018266 1

175 & 200/250 1018268 1

140/175 1018269 1


175mm 1018380 1

200mm 1018381 1

Sealing tape 1018382 10


6x140/175/200 1018326 1

8x140/175/200 1018327 1

Used with 25mm and 32mm Thermo Mini and Supra pipes when connecting into insulation sets.

With heat-shrinkable tube. Can be used wherever there is no pressurized water.

Heat-shrinkable tube for chamber.

Designed to accommodate pipe connections which cannot be made with an Uponor T-insulation set, e.g. for connecting Uponor Single to Twin pipes or for Uponor Quattro pipelines. Lead-time typically 2 weeks. Size 980 (d) x 685 (h) x 1660 (l), 50kg.




Ecoflex Entry sleeve, non-pressure waterproofEntry sleeve, non-pressure waterproof

Ecoflex Shrinkable sleeve for chamberShrinkable sleeve for chamber

Ecoflex Chamber with lidChamber with lid

27.75

41.46

55.30

45.42

1,112.39

1,242.22

18.88

32.60

34.47

(per/m)


Ecoflex P

ipe System (P

re-Insulated)

Ecoflex (Pre-Insulated) Pipe Fittings, Components and Accessories


Warning tape roll 1018385 250m


25+32/68 1048697 1

40+50+63/140 1048699 1

75/175 1048700 1

90/175 1048701 1

110/200 1048702 1


255mm 1018378 30m

To mark position of buried pipes. Red, tear-proof plastic tape imprinted with ‘Uponor’ and symbols for trench identification.

Set includes Supra Plus Control Unit, 2 rubber end caps, 5m sensor cable, fixing screws, cable connections and full instructions. Control unit requires 230V supply.

Shrinkable tape used for sealing damaged outer jacket.

Ecoflex Trench warning tapeTrench warning tape

Ecoflex Shrinkable tapeShrinkable tape

Ecoflex Supra Plus Connection SetSupra Plus Connection Set

271.75

271.75

318.72

362.33

329.90

30.23

18.88

6 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

UFH Installer Course A two-day course at our purpose built facility in Lutterworth. The course is aimed at both new and experienced users of our products.

Day 1 gives a thorough understanding of applications of UFH in our theory suite.

Day 2 follows with practical exercises in our hands-on practical suite.

uPoints1000

The Uponor Training Academy was established to offer you a range of industry accepted courses. Starting with a comprehensive installer training course and moving through to design and control oriented workshops, encompassing techniques associated with Uponor Plumbing and Underfl oor Heating products.

We are also able to offer bespoke workshops, tailored to suit your individual needs. Our main training academy is a purpose built facility close to Junction 20 off the M1, in the market town of Lutterworth.

Training Academy: 01455 551363

Uponor Head Offi ce: 01455 550355

email: [email protected]

www.uponor.co.uk

Also see page 123 for other courses

available

6 5

Underfloor Heating

Product code information for Domestic and Commercial UFH systems, when choosing one of our underfloor heating systems, you benefit from convenient and reliable solutions.

• Multi OnePack Range 66

• Uponor Klett (Self Attaching) System 70

• Screed Floor System 73

• Timber Floor System 76

• Floating Floor System 77

• UFH Pipe, Manifolds & Accessories 81

• Comfort Pipe Plus (PEX 20) System 85

• Underfloor Heating Controls 93

Underfl

oor Heating

6 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

6 8

Und

erfl

oor

Hea

ting

Uponor One Pack Systems1 Loop

Description Zones LoopsControls

Wired Radio

WaterTemperature

Control uPoints Code Price per pack

0-15m² 1 1 2000 1059643

0-15m² 1 1 2000 1059644

0-15m² 1 1 2000 1059645

0-15m² 1 1 2000 1059646

2 Loop


Wired Radio

WaterTemperature


15-30m² 1 2 2000 1059647

15-30m² 1 2 2000 1059648

15-30m² 1 2 2000 1059649

15-30m² 1 2 2000 1059650

15-30m² 2 2 2000 1059651

15-30m² 2 2 2000 1059652

15-30m² 2 2 2000 1059653

15-30m² 2 2 2000 1059654

3 Loop


Wired Radio

WaterTemperature


30-45m² 1 3 2000 1059655

30-45m² 1 3 2000 1059656

30-45m² 1 3 2000 1059657

30-45m² 1 3 2000 1059658

30-45m² 2 3 2000 1059659

30-45m² 2 3 2000 1059660

30-45m² 2 3 2000 1059661

30-45m² 2 3 2000 1059662

30-45m² 3 3 2000 1059663

30-45m² 3 3 2000 1059664

30-45m² 3 3 2000 1059665

30-45m² 3 3 2000 1059666

Preparation ConnectionsLaying LoopsPreparation Laying Loops Connections

uPoints

2000

uPoints

2000

uPoints

2000

1,020.00

478.60

1,284.90

743.50

1,123.72

628.29

1,388.62

893.20

1,181.02

685.59

1,440.19

944.77

1,308.68

812.09

1,573.58

1,077.00

1,365.98

869.39

1,625.15

1,128.57

1,423.28

926.69

1,676.72

1,180.14

6 9

Underfl oor H

eating

4 Loop


Wired Radio

WaterTemperature


45-60m² 1 4 2000 1059667

45-60m² 1 4 2000 1059668

45-60m² 1 4 2000 1059669

45-60m² 1 4 2000 1059670

45-60m² 2 4 2000 1059671

45-60m² 2 4 2000 1059672

45-60m² 2 4 2000 1059673

45-60m² 2 4 2000 1059674

45-60m² 3 4 2000 1059675

45-60m² 3 4 2000 1059676

45-60m² 3 4 2000 1059677

45-60m² 3 4 2000 1059678

5 Loop


Wired Radio

WaterTemperature


60-75m² 1 5 2000 1059679

60-75m² 1 5 2000 1059680

60-75m² 1 5 2000 1059681

60-75m² 1 5 2000 1059682

60-75m² 2 5 2000 1059683

60-75m² 2 5 2000 1059684

60-75m² 2 5 2000 1059685

60-75m² 2 5 2000 1059686

60-75m² 3 5 2000 1059687

60-75m² 3 5 2000 1059688

60-75m² 3 5 2000 1059689

60-75m² 3 5 2000 1059690

60-75m² 4 5 2000 1059691

60-75m² 4 5 2000 1059692

60-75m² 4 5 2000 1059693

60-75m² 4 5 2000 1059694

Filling & Pressure System Start UpControlsFilling & Pressure System Start UpControls


uPoints

2000

uPoints

2000

1,506.45

998.77

1,771.35

1,274.24

1,563.75

1,066.64

1,822.92

1,325.81

1,621.05

1,123.94

1,874.49

1,377.38

1,685.65

1,188.43

1,950.55

1,453.33

1,742.95

1,245.73

2,002.12

1,504.90

1,800.25

1,296.72

2,053.69

1,556.47

1,857.55

1,360.33

2,105.26

1,597.23

7 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting

Remove work steps

28db impact noise reduction can remove the need for installing a resilient acoustic layer

Built in membrane removes the need for installing a polythene layer above the insulation

Reduce overall build programme

Save on cost of supplying and installing a resilient acoustic layer

Halve the time of installing an UFH system or halve the installation cost

28db impact noise reduction

Tested to DIN4109

Identical laboratory methods to

BSEN ISO 140-8:1998

Better than some of the leading acoustic underlay products

Potential for signifi cant savings on supply and installation costs

Meets BSEN 1264 insulation requirements for fl oors with heated rooms below

ACOUSTIC & INSULATION QUALITIES

25 year manufacturing defect warranty

Design life in excess of 50 years in accordance with DIN 16892

Design pressure of 6 bar at 70oc

Available in coil sizes up to 640m

Oxygen diffusion barrier conforming to DIN 4726

Manufactured to ISO 9001 & 14001

3.3 billion metres of pipe sold since 1972

Conforms to EN ISO 15875

PEX-a 16x1.8mm UFH PIPE

PROJECT SAVINGS

Optimal Productivity and Performance

Did you know...Visit our Uponor youtube channel to watch the latest Self Attaching System video. www.youtube.com/user/UponorUKUponor Self Attaching System Challenge


Underfl oor H

eating

Uponor Klett (Self Attaching) System

Screed Floor Construction

Your benefi ts:

Reduced installation time and overall costs.

One person installation.

Simple or complex pipe layout without compromise.

Heating or cooling, domestic or commercial.

High retention force.

No fi xing damage to insulation membrane.

Two grades of insulation available to suit the project.

Description uPoints Code Qty Price per/m2

30mm Thermal and Sound Insulation 100 1007227 12

Description Code Qty Price per/m2

30mm Thermal Insulation 1048807 10


16x1.8mm SAS Coil 600 1047624 240m

16x1.8mm SAS Coil 1600 1047625 640m

Pipe & Accessories

EPS 70 heat and sound insulation roll laminated with SAS hook and loop technology and pre-printed grid for easy laying of pipes. 28dB Impact noise reduction. Thermal Resistance 0.75m²K/W. Rolls are 1m x 12m.

EPS 100 insulation slab with increased compressive strength for higher loadings. Laminated with SAS hook and loop technology and pre-printed grid for easy laying of pipes.Thermal Resistance 0.75m²K/W.Bi-folded slabs are 1m x 2m.

Polyethylene cross linked pipe with oxygen diffusion barrier bound with SAS hook and loop technology.




uPoints

uPoints

600

Self Attach. Heat/Sound Insulation Roll Klett Heat/Sound Insulation Roll

Self Attach. Heat Insulation Slab Klett Heat Insulation Slab

PEX Self Attaching Pipe Klett Comfort Pipe

8.16

10.07

1.96

1.96

7 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting Uponor Klett (Self Attaching) System Accessories


50m roll 1000080 50m

Compression Coupling


¾”MTx ¾”MT 1006641 1


Pipe guide tool 1007179 1


Protective gloves 1048675 1

For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.

Made of plated brass 3/4” MT x 3/4 “ MT for repair to damaged sections of SAS 16 x 1.8mm pipe.

Can be fitted between doorways so as to elevate SAS pipe from the ground during installation.

Uponor gloves recommended for use when handling self attaching pipe.

Wide tape for sealed joining of Uponor insulation products.Roll width: 50mmRoll Length: 66m


Width 50mm x Length 66m 1000012 1




Uponor Multi tapeUponor Tape

Klett Spreader Bar with Pipe Leading ToolUponor Spreader Bar with Pipe Leading Tool

Multi edging stripEdging strip

Klett GlovesGloves


16x¾”FT 1057441 1

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of Vario B (NV/LS/TM) Manifolds.

Multi pipe bend supports (Metal)PEX Pipe bend supports


Metal 16mm 1009004 1

Bend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.

Eurocone Compression Adapters (PEX Pipe)

32.76

1.23

3.94

2.95

4.43

5.14

1.59


Underfl oor H

eating

Uponor Screed Floor System

Floor Construction

Your benefi ts:

Secure pipe fi xing method

Can be fi xed directly to existing fl oor grade insulation

Can accommodate various pipe layouts and spacings

Low cost fi xing system

Panels, Insulation, Positioning Plates


50mm (1.52m2K/W) 1002046 8m²

Multi-foil


4mm foil insulation 1000017 60m²

Pipe positioning plate 16

Description uPoints Code Qty Price per/m2

Pipe positioning plate 100 1016703 10m²

Staples

Clip Rail and Staples

Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Dimensions are 1000 x 2000mm.

Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.

Castellated pipe positioning plate, designed to simplify the installation of 16mm underfloor heating pipes. For installation over suitable floor grade insulation. Dimensions of each panel 1447 x 900 x 18mm LxWxH of mould. Each pack covers 9.6m². Pipe spacing increments of 55mm/110mm/165mm/220mm/275mm/330mm

uPoints

100

Tacker PanelRolltec

15.58

4.85

9.48

7 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting Uponor Screed Floor System - Edging Strip & Clamp Tracks


16-20mm 1000018 100m


16mm 1013127 100m


50m Roll 1000080 50m

Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with Magna Clamp track nail 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 1m. Width of track: approx. 50mm.Space between pipe holders: 50mm.

Self-adhesive U-profile strip made of recycled material, with integrated pipe holder for 16mm MLC and evalPEX. May be used with Magna Clamp track nail 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 2m. Width of track: approx. 40mmSpace between pipe holders: 25mm.


Fix Clamp Track 16

Fix Clamp Track 16 –20Clamp Track 16 –20

Clamp Track 16


3.00

2.46

1.23


Underfl

oor Heating

Uponor Screed Floor System - Clips & Accessories


400mm 1013130 50


16-20mm 1002297 300


25mm 1002018 100


16-20mm 1002296 1000


65mm 1005291 500

Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint.Diameter: 23mmLength: 400mmColour: blackAlso supplied coils, see page 91 for details.

Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.

Suitable for holding 25mm conduit in position. Length 55mm.

Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.

Used to hold Fix Clamp Track 16-20 in position or to provide additional fixing where required. Length 65mm.




Magna clamp track nail

Tacker pipe clip standard

Tacker pipe clip long

Multi U-clip 25

Multi Joint protection tubeJoint protection tube

Kombi Klip long

U-Clip 25

Kombi Klip short

Fastening Nail for Clamp Track

0.15

0.25

1.14

0.08

0.08

7 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting Uponor Timber Floor System

Floor Construction

Heat Emission Plates benefi ts:

Can be laid directly on to existing traditional joists

Direct contact between plate and fl oor covering provides an effi cient and highly responsive method of heat transfer

Options available for different joist pitches and sprung fl oor systems

Positioning Plates, Insulation & Clips


U 16 HEP400 700 1034365 28

Unifoil


4.5mmx1.2mx25m 1002070 30m²

Unifoil Clip


Unifoil Clip 1002071 100

For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 1002052. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).

Aluminium foil insulation roll, combines insulation with reflective qualities for intermediate timber suspended floor applications. Lightweight, waterproof and corrosion resistant. For use in conjunction with Unifoil Clip 1002071. Thermal resistance 1.45m2K/W (including 50mm air space). Each 25 x 1.2m roll covers 20m2, with 50mm joists at 400mm centres. Not suitable for floor applications with ventilated voids.

For use in conjunction with Unifoil system 1002070. Fits over joists (2”) and holds the pipe over the Unifoil at 200mm c/c. Allow 5 clips/m2.




Siccus 16 Double heat emission plateDouble heat emission plate

uPoints

700

6.03

0.99

9.70


Underfl oor H

eating

Uponor Floating Floor System

Floor Construction

Your benefi ts:

Can be laid directly on to an existing fl oor

Expanded Polystyrene provides thermal insulation and improved performance

Can be easily adapted to suit different size and shaped rooms

Boards can be routed with ease so as to accommodate additional pipe grooves and channels.

Panel & Heat Emission Plates - 16mm


1.2x1.2x50mm 1002052 6


U 16 HEP400 700 1034365 28

Grooved polystyrene insulation panel for 16mm underfloor heating pipes at 200mm c/c. Panel dimensions 1200 x 1200 x 50mm LxWxH. Used together with Double Heat Emission Plate 1034365. Thermal resistance 1.52m2K/W. Each pack covers 8.64m2.

For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 1002052. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).


uPoints

700

Siccus 16 Floating fl oor panel

Siccus 16 Double heat emission plate

Floating fl oor panel 16

Double heat emission plate

22.25

9.70

7 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting

Uponor 12 Heat Emission Plate (HEP12)


1180 x 110mm 1034358 30

PEX pipe, supplied in coils (12mm)

Description Old Code New Code Qty Price per/m

12x1.7mm 1033889 1063284 60m

12x1.7mm 1033883 1063285 120m

12x1.7mm 1033891 1063286 240m

Uponor 12 Floating Panel (single)


1200 x 750 x 15mm 1034338 10

Uponor 12 Floating Panel (feed/return)


1200 x 250 x 15mm 1034340 10

Floating Panels

Fixed Panels

Uponor Floating Floor System - System 12

Floor Construction

Your benefits:

Can be laid directly on to an existing floor

Expanded Polystyrene provides thermal insulation and improved performance

Can be easily adapted to suit different size and shaped rooms

Boards can be routed with ease so as to accommodate additional pipe grooves and channels.

Finished floor coverings can be laid directly on top

Ultra low profile just 13mm in height!

Uponor Floating Floor System - System 12 Components

Aluminium metal plates for use with Uponor 12 Floating feed/return panels. Single track for Uponor 12mm pipe.

Comfort pipe evalPEX pipe, cross-linked polyethylene with oxygen diffusion barrier (to DIN4726) for use in underfloor heating applications. Allow 8m of pipe per m2 for the Floating Panel system, and 6m of pipe per m2 for the Fixed Panel system.

Grooved polystyrene panel complete with heat emission plates glued to the top surface. Grooves c/c 125mm. Heat emission plates can be snapped off at end to reveal turns and two straight run grooves for feed/return. Allow approx.1.2 pcs/m2.

Grooved polystyrene panel for use where multiple feed pipes run to/from the manifold to the heated area. Grooves c/c 62.5mm.

NEW

NEW

NEW

2.17

1.55

1.55

1.55

32.84

3.69


Underfl

oor Heating

Uponor Floating Floor System - System 12 Components


1215 x 175 x 13mm 1002021 10


1265 x 1050 x 13mm 1002022 1


1225 x 170 x 13mm 1002024 10


1225 x 300 x 13mm 1002023 10

13mm plywood panel bonded to an aluminium heat transfer plate with single groove c/c 175mm designed to take 12mm pipe. Allow approx. 4.7pcs/m2.

As per Uponor 12 Fixed Panel (single), although pre-assembled in groups of 6 and staggered. Assembled panel coverage approx.1.33m2.

13mm plywood panel with multiple grooved turns to take 12mm pipe at c/c 175mm. Coverage approx. 1.21m2.

13mm plywood panel with multiple grooved turns and six straight run grooves for feed/return. Complete with 1 off tree piece to allow entry/exit of loops.




Tignum 12 Fixed Panel (single)

Tignum 12 Fixed Panels (multi)

Tignum 12 Fixed Panel (turn)

Tignum 12 Fixed Panel (feed and turn)

Uponor 12 Fixed Panel (single)

Uponor 12 Fixed Panels (multi)

Uponor 12 Fixed Panel (turn)

Uponor 12 Fixed Panel (feed and turn)

7.85

53.39

9.98

20.04

8 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting Uponor Floating Floor System - System 12 Components


310ml 1002020 1

Tube of silicone heat transfer paste and adhesive for use with the Fixed Panel system. One tube coverage approx. 5m2.


12mm 1033974 1

These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.


12x¾”Eurocone 1002051 1

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of Vario B (NV/LS/TM) Manifolds.




Tignum 12 Silicone

Multi pipe bend supports (Metal)

Vario Compression adapters (PEX Pipe)

Uponor 12 Silicone

PEX Pipe bend supports (Metal)

Eurocone Compression adapters (PEX Pipe)

9.17

1.10

4.73


Underfl oor H

eating

Uponor UFH System Pipe & Pipe Accessories


16x2mm 250 1013463 50m

16x2mm 350 1013377 75m

16x2mm 500 1013378 100m

16x2mm 500 1013559 120m

16x2mm 900 1013371 200m

16x2mm 2500 1013380 500m

100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT). Manufactured to the strictest European standards and fully WRAS approved.


16x1.8mm 80 1058856 80m

16x1.8mm 120 1058857 120m

16x1.8mm 240 1047622 240m

16x1.8mm 640 1047623 640m

Diffusion-resistant PEX pipes, four-layer (PEX – adhesive agent – oxygen barrier – adhesive agent), for underfloor heating and cooling applications.Maximum operating pressure is 6 bar.Maximum temperature operating 70°c.


Metal 16mm 1009004 1

Bend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.


uPoints

250

uPoints

80

Uponor MLC white, supplied in coilsMLCP white, supplied in coils

Comfort pipe white, supplied in coilsPEX Pipe white, supplied in coils


1.96

1.96

1.96

1.96

1.96

1.96

1.30

1.30

1.30

1.30

1.59

8 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting

Controls the fl ow and temperature of water within UFH systems for a maximum heat load of 15kW.

Bolt together kit, which has been designed to fi t neatly onto the UPONOR range of Vario B (TM/LS/NV manifolds. Left and right hand installation possible.

The thermostatic valve has a control head with a temperature adjustment range of 35 to 60oC.

6m A rated energy effi cient pump and balancing valve.

12mm PEX

16mm PEX

20mm PEX

16mm MLCP

Compact Control Pack V5

Pre-assembled to the Uponor TM Manifold

Ready to be wall mounted straight from the box

High limit protection

6m A rated energy effi cient pump and balancing valve

12mm PEX

16mm PEX

20mm PEX

16mm MLCP

Heating ControlPack

UFH Returns

Pump Flow

Boiler Flow

UFH Flow

Boiler Returns

Building a Sustainable Future Together

www.uponor.co.uk

Uponor Heating Control Pack Uponor Vario B Heating Control Pack

Uponor Vario B Compact Control Pack V5Compact Control Pack V5





Underfl oor H

eating

Uponor UFH System Manifolds


1 loop extension set 200 1002197 1

2 loops 300 1002201 1

3 loops 400 1002202 1

4 loops 500 1002203 1

5 loops 600 1002204 1

6 loops 700 1002205 1

7 loops 800 1002206 1

8 loops 900 1002207 1

9 loops 1000 1002208 1

10 loops 1100 1002198 1

11 loops 1200 1002199 1

12 loops 1300 1002200 1

The Uponor Vario B Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems.Note: Thermal actuators & Eurocone compression adapters are supplied separately.


230v 700 1059842 1

Designed for the control of the water temperature and the flow rates in UFH with a maximum heat load of 15kW. The pack is designed to bolt onto the Uponor Vario B Manifold. Incorporates a high limit protection function preset to 60°C, a two port thermostatic injection valve, an A rated energy efficient 6m pump and balancing valve. Left or right hand installation possible.


2-Port 950 1059843 1

3-Port 1000 1059844 1

4-Port 1050 1059845 1

5-Port 1150 1059846 1

6-Port 1250 1059847 1

7-Port 130 1059848 1

8-Port 1400 1059849 1

The pack is made up of the Uponor Vario B Manifold with a Compact Control Pack V5 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. Designed for the control of water temperature and flow rates within UFH, for a maximum heat load of 15kW.

Uponor Vario B fl owmeter manifoldUponor TM Manifold




uPoints

200

uPoints

700

uPoints

950

83.75

114.28

158.36

196.43

235.22

272.75

312.67

352.07

390.09

428.34

466.30

508.01

535.23

646.19

698.99

723.14

759.50

794.38

831.90

868.29

8 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting Uponor UFH System Manifolds Accessories


24V for TM/LS Manifolds 1002053 1


With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.


1”FT x 1”MT 1059132 1

Uponor Manifold isolation valves for use with Vario B range.Supplied as a pair.

Eurocone Compression adapters (MLC)


16x¾”FT 1058090 1

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of Vario B (LS/TM) Manifolds.


16x¾”FT 1057441 1

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of Vario B (LS/TM) Manifolds.




Uponor Vario B Thermal Actuator

Uponor Vario 1” Ball Valve

Thermal Actuator

Uponor 1” Ball Valve

Vario Compression adapters (PEX Pipe)Eurocone Compression adapters (PEX Pipe)

29.25

28.49

25.36

3.48

5.14


Comfort Pipe Plus System(PEX 20 Commercial Underfloor Heating)

Our Industrial and Commercial PEX pipe, has a 50 year design life, over 30 years of service in the UK, requires less manifolds and being highly flexible makes it a fast and easy installation.

• Comfort Pipe Plus & Pipe Accessories 84

• Vario B Manifolds 88

• Insulation & Heat Emission Plates 89

• Comfort Pipe Plus System Accessories 90

8 5

PEX

20 Com

mercail U

nderfloor H

eating

8 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Com

fort

Pip

e P

lus

(PEX

20)

Com

mer

cial

Und

erfl

oor

Hea

ting Comfort Pipe Plus (PEX 20) UFH System - Pipe & Pipe Accessories

Comfort pipe plus (PEX) 20 x 2mm underfloor heating pipe. Five layer cross-linked polyethylene barrier pipe, manufactured in accordance with DIN 16892 and DIN 4726. Maximum operating pressure of 6 bar at 70oC.

Bend supports are used where the underfloor heating Comfort pipe plus (PEX) is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.


Made from plated DZR brass. ¾”FT eurocone thread for connection to ¾”MT outlet ports of Vario B (LS/TM) Manifold.


Metal 20mm 1009233 1


20x2mm 1009229 60m

20x2mm 500 1034538 100m

20x2mm 600 1009228 120m

20x2mm 1000 1009230 240m

20x2mm 1850 1009231 480m


24V for Vario B Manifolds 1002053 1

230V for Vario B Manifold 1013006 1


20x¾”FT - Vario B Manifold 1010629 1




uPoints

Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to I.D. of the protective tube. The second is the size of pipe suitable. N.B. Does not include pipe.


23 Black (20mm) 1012864 50m


Comfort pipe white, supplied in coilsPEX Pipe white, supplied in coils


Vario B Thermal ActuatorThermal Actuator

Vario Compression adapters (PEX Pipe)Eurocone Compression adapters (PEX Pipe)

2.17

2.17

2.17

2.17

2.17

2.47

29.25

28.49

3.83

1.15


Com

fort Pipe P

lus (PEX

20) Com

mercial U

nderfloor H

eating

Comfort Pipe Plus (PEX 20) UFH System - Pipe Accessories

For connection to Vario B Manifold. Can be fitted to left or right hand side of manifold.

Uponor Manifold isolation valves for use with Vario B range.Supplied as a pair.

Compression coupling

Made from DZR brass. May be used with Eurocone compression adapters for PEX pipe (¾”FT) to repair damaged sections of pipe.

Height 850mm. Depth 100mm. Delivered with lockable front door (not shown).Not suitable for compact control sets.


2-6 loops width 550mm 1034377 1

6-12 loops width 850mm 1009188 1


AAV & Thermometer Gauge 1046886 2


¾” 1006641 1


1”FT x 1”MT 1059132 1


Vario 1” Ball ValveUponor 1” Ball Valve

Vario Manifold cabinetManifold cabinet

Vario B Manifold connection fitting with thermometer and airventManifold connection fitting with thermometer and airvent

29.91

25.36

3.94

212.38

247.58

8 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Com

fort

Pip

e P

lus

(PEX

20)

Com

mer

cial

Und

erfl

oor

Hea

ting


1 port extension set 250 1002181 1

2 port 300 1002182 1

3 port 350 1002183 1

4 port 450 1002184 1

5 port 550 1002185 1

6 port 650 1002186 1

7 port 700 1002187 1

8 port 800 1002188 1

9 port 900 1048274 1

10 port 950 1048275 1

11 port 1050 1048276 1

12 port 1150 1048277 1

The Uponor Vario B Manifold includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Note: Thermal actuators & Eurocone compression adapters are supplied separately.

Comfort Pipe Plus (PEX 20) UFH System - Manifolds


1 loop extension set 200 1002197 1

2 loops 300 1002201 1

3 loops 400 1002202 1

4 loops 500 1002203 1

5 loops 600 1002204 1

6 loops 700 1002205 1

7 loops 800 1002206 1

8 loops 900 1002207 1

9 loops 1000 1002208 1

10 loops 1100 1002198 1

11 loops 1200 1002199 1

12 loops 1300 1002200 1

The Uponor Vario B Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems.Note: Thermal actuators & Eurocone compression adapters are supplied separately.


uPoints

200

uPoints

250

Vario B fl owmeter manifoldUponor TM Manifold

Vario B Manifold with valveLS Manifold

83.75

114.28

158.36

196.43

235.22

272.75

312.67

352.07

390.09

428.34

466.30

508.01

91.74

108.75

146.29

179.30

213.10

245.59

280.59

314.87

347.03

378.28

409.68

441.76


Com

fort Pipe P

lus (PEX

20) Com

mercial U

nderfloor H

eating

Comfort Pipe Plus (PEX 20) UFH System - Manifolds

Grooved polystyrene insulation panel for Uponor Comfort Pipe Plus (PEX20) underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with HEP300 heat emission plate 1009132. Allow 1.2 pieces/m2.

Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Dimensions are 1000 x 2000mm.

Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.


30mm 1.2mx0.79m 1034347 5

50mm 1.2mx0.79m 1034352 3


PEX 20 HEP300 1009132 40

For use with timber suspended floors, with joists at 300mm centres or floating floor panels. Single track for Uponor Comfort Pipe Plus (PEX20) at 300mm c/c. Plate dimensions 1150 x 280mm. Each pack of 40 plates covers 16m2 (based on 80% floor coverage).

Comfort Pipe Plus (PEX 20) UFH System - Insulation, Heat Emission Plates


50mm (1.52m2K/W) 1002046 8m²

Multi-foil


4mm foil insulation 1000017 60m²


Manifold by-pass between flow and return 1048278 1

Preset to 0.25 bar. For connection between flow and return manifold (Vario B). Complete with isolation valve for filling purposes.




Vario B Automatic Manifold By-PassAutomatic Manifold By-Pass

Tacker PanelRolltec

Siccus 20 Floating floor panel

Siccus 20 Heat emission plate HEP300

Floating floor panel 20

Heat emission plate HEP300

15.58

4.85

14.74

20.17

7.34

63.15

9 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Com

fort

Pip

e P

lus

(PEX

20)

Com

mer

cial

Und

erfl

oor

Hea

ting Comfort Pipe Plus (PEX 20) UFH System - Heat Emission Plates & Accessories



PEX 20 HEP411 650 1034491 20

For Junckers sprung floor battens spaced at 411mm centres. Double track for Comfort Pipe Plus (PEX20) at 200mm c/c. Plate dimension 1150 x 405mm. Each pack of 20 plates covers 12.3m2 (based on 80% floor coverage).


PEX 20 HEP400 500 1034492 20

For use with timber suspended floors, with joists at 400mm centres. Double track for Comfort Pipe Plus (PEX20) at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 20 plates covers 11m2 (based on 80% floor coverage).


16-20mm 1000018 100m

Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with Magna clamp track nail 1005291 for a more secure fastening to your insulation. Allow 1m/2m2.Length of track: 1m. Width of track: approx. 50mm.Space between pipe holders: 50mm.


Without hooks 1009135 100pcs

With hooks 1034371 100pcs

For Comfort Pipe Plus (PEX20) 20 x 2mm. Length 600mm. Clips at c/c 150mm. Clip rails snap together to form longer lengths. Delivered in bundles of 10 x 10 pieces clipped together. Allow 1-2 pcs/m2. Available with or without barb hooks. May be used with Magna clamp track nail 1005291. Please note : a pack is 60m.


50m Roll 1000080 50m




uPoints

650

uPoints

500

Siccus 20 Heat emission plate HEP411Heat emission plate HEP411

Siccus 20 Heat emission plate 400mmPEX 20 - Heat emission plate 400mm

Fix Clamp Track 20

Fix Clamp Track 16 –20Clamp Track 16 –20

Clamp Track 20


1.23

12.79

10.10

3.00

1.40

1.31


Com

fort Pipe P

lus (PEX

20) Com

mercial U

nderfloor H

eating

Comfort Pipe Plus (PEX 20) UFH System - Accessories


65mm 1005291 500

Used to hold Fix Clamp Track 16-20 in position or to provide additional fixing where required. Length 65mm.


400mm 1013130 50

Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint.Diameter: 23mmLength: 400mmColour: black


16-20mm 1002296 1000

Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.


16-20mm 1002297 300

Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.


25mm 1002018 100

Suitable for holding 25mm conduit in position. Length 55mm.



Magna clamp track nail

Tacker pipe clip standard

Tacker pipe clip long

Multi U-clip 25

Multi Joint protection tubeJoint protection tube

Kombi Klip long

U-Clip 25

Kombi Klip short

Fastening Nail for Clamp Track


23 Black (20mm) 1012864 50m

Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to I.D. of the protective tube. The second is the size of pipe suitable. N.B. Does not include pipe.

0.08

1.14

0.08

0.15

0.25

1.15

9 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Everyone perceives temperature differently. During summer and winter, maximum thermal comfort can only be reached if the environmental temperatures satisfy the needs of the user and not the other way round.

This requires a flexible and sensitive control system. Uponor offers exactly this, ranging from room thermostats to controllers and heating manifolds, all from one source.

A feeling of well-being in our surroundings can only be achieved when all components fit perfectly with each other.

The innovative systems from Uponor for individual room and supply temperature control, combined with Uponor radiant heating and cooling solutions, provide comfortable ambient temperatures all year round, together with ease of use.

Easy control for individual comfortIdeal room temperatures every month of the year

Control cycle for thermal comfort

Patented technology unique to Uponor.

Auto balance technology does it all. And it goes on balancing through sun, wind, and frost; through the changing seasons; and through the household’s changing lifestyle and usage patterns, keeping room temperatures ideal every month of the year.

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Heating & Cooling Controls

Uponor individual room and supply temperature controls, combined with our radiant heating and cooling solutions, provide comfortable ambient temperatures all year round.

• Vario B Compact Control Pack V5 94

• Fluvia VPG & PPG Control Sets 95

• Water Temperature Controls 96

Room Control Components

• Radio 24V 98

• Wired 24V 100

• Radio 24 & Wired 24V Accessories 101

• 12V STATPACKS 103

• Wired 230V Controls & Accessories 104

• 230V STATPACKS 1069 3

9 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Water Temperature Control - Vario B Compact Control Pack V5


230v 700 1059842 1

Designed for the control of the water temperature and the flow rates in UFH with a maximum heat load of 15kW. The pack is designed to bolt onto the Uponor Vario B Manifold. Incorporates a high limit protection function preset to 60°C, a two port thermostatic injection valve, an A rated energy efficient 6m pump and balancing valve. Left or right hand installation possible.


2-Port 950 1059843 1

3-Port 1000 1059844 1

4-Port 1050 1059845 1

5-Port 1150 1059846 1

6-Port 1250 1059847 1

7-Port 1300 1059848 1

8-Port 1400 1059849 1

The pack is made up of the Uponor Vario B Manifold with a Compact Control Pack V5 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. Designed for the control of water temperature and flow rates within UFH, for a maximum heat load of 15kW.




uPoints

700

uPoints

950



535.23

646.19

698.99

723.14

759.50

794.38

831.90

868.29


Heating &

Cooling C

ontrols

Uponor Water Temperature Control - Fluvia VPG & PPG Control Sets


PPG-20 1059839 1

Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and ready for direct connection to all Uponor UFH manifolds. Includes 6m A rated energy efficient pump and valve actuator with end switch. Maximum 15kW heat load.


VPG-10 with actuator 1200 1061091 1


PPG-30 1059840 1

Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and ready for direct connection to all Uponor UFH manifolds. Includes a 6m A rated energy efficient pump and a secondary water temperature immersion pocket. 3 port blending valve motor and controller sold separately. Maximum 20kW heat load.

Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. Supplied pre-assembled and pre-wired with a mixing valve actuator and climate controller. The Fluvia E PPG-30 is supplied ready for remote coupling to multiple manifolds from a central location. Includes an 8m A rated energy efficient pump as well as a secondary water temperature immersion pocket. Direct coupling to manifold is possible using adapters 1059841. A separate 24V power supply is required for mixing valve motor (24V transformer 1048762). Maximum 30kW heat load.


VPG-10 with actuator

PPG-20

PPG-30

Fluvia T VPG-10 with actuator

Fluvia E PPG-20

Fluvia E PPG-30

uPoints

1200 634.28

695.14

1,957.78

9 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Water Temperature Controls

Actuator 24V with 0-10V Signal


24V 1002356 1

For motorised water temperature control when used with the climate controller. To be used in conjunction with either 1048762 or 1048764 24v transformer.


¾“r Kv4 1002013 1

¾“s Kv6.3 1002014 1

1“r Kv8 1002015 1

1“s Kv12 1002016 1

1¼ “s Kv18 1002017 1

Made from DZR brass. Rotary shoe valve used to blend the system water to the required temperature.


Climate Controller 1047844 1

Weather compensated or set point water temperature controller for radiant heating and cooling systems. Features an installation wizard for a fast and easy setup. Can also communicate with the Radio 24V (Wireless) Zone controller in an integrated and intelligent way via its bus connection.


Climate Controller 1047845 1

Features Radio 24V wireless humidity sensor and Radio 24V wireless controller antenna so as to enable dew point monitoring for radiant cooling.

Heating and cooling


24V Transformer 1048762 1

24v transformer for use with Actuator 1002356 and climate controller.

3-Port mixing valve Viva 3-port mixing valve

Climate Controller Radio 24V Climate Controller

Climate Controller Extended Radio 24V Climate Controller Extended

Cable Transformer Power Supply Radio 24V Cable Transformer Power Supply

82.72

82.72

90.07

98.89

107.62

207.25

523.99

719.23

21.08


Heating &

Cooling C

ontrols

Uponor Water Temperature Controls


24V Transformer 1048764 1

230V/24V transformer for use with Actuator 1002356 and Radio 24V climate controller.


Antenna 1046116 1

Enables communication between the climate controller and wireless sensors. Please note that the wireless antenna does not need to be fitted when using the climate controller in conjunction with the Radio 24V wireless zone controller.


Humidity Sensor 1047846 1

Wireless humidity sensor used for dew point calculation so as to prevent condensation occurring in cooling mode.


Fluvia Push 12 1067388 1

Designed to fit directly onto an existing radiator circuit, offering control of both water and room temperature, and flow rate to a single loop of underfloor heating pipe. Serves up to 15m2 of floor area. Additional Eurocone ¾” compression adapters (2) are required for connection of UFH loop, depending on which pipe is used.




Plug Transformer Power Supply Radio 24V Plug Transformer Power Supply

Wireless Controller Antenna Radio 24V Wireless Controller Antenna

Wireless Humidity Sensor Radio 24V Wireless Humidity Sensor

Fluvia T Push 12 water temperature control NEW

Fluvia branch NEW

Vario fill & drain valve NEW


2 x ¾” 1005675 2

Uponor Fluvia Push 12 branch manifold, for extension of the system to two loops.


¾”x¾” 1061802 2

Fill and drain port for Uponor Fluvia Push 12 system. Simple screw connection onto the existing Fluvia Push 12 port.

366.37

21.08

93.75

127.16

27.22

29.10

9 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Room Control Components - Radio 24V


Zone Control Kit 700 1045564

NEW! Featuring Dynamic Energy Management - up to 12% energy saving!Comes complete with 12- channel wireless controller, interface unit, external antenna, cables for connections and mounting material.


Controller 400 1045567 1

NEW! Featuring Dynamic Energy Management - up to 12% energy saving!Designed for receiving and interpreting radio signals from a maximum of 12 wireless thermostats. In built 230-24V transformer, two relays and can control up to 14 x 24V actuators. Time controlled setback is available via the Radio 24V Zone Interface Controller (1046083).


Remote Access Module 1046485 1

NEW! Featuring Dynamic Energy Management - up to 12% energy saving!The Interface can be used to control a maximum of three Radio 24V Zone Controllers (1045567). The unit offers 5 temperature setback programs and comes complete with cable for connection to the controller. Features include holiday mode, assignment of room names, display of all setpoint and actual room temperatures and valve and pump exercise functions.


Interface 250 1046083 1

Allows remote access to switch between Eco or Comfort settings. Very useful for holiday homes. Gives updates; indoor temperature and outdoor temperature - requires a Radio 24V Public Thermostat (1045572)

Note: will require a SIM card, not provided.

www.youtube.com/user/UponorUK

Dynamic Energy Management (DEM) Controls - Virtual City.wmv

Did you know...Did you know the Radio 24V Zone Controller can be connected to the Climate Controller via BUS communication. This enables

2 way communication allowing shared use of sensors and thermostats for improved performance.




uPoints

700

uPoints

400

uPoints

250

Wireless Zone Controller and Interface Kit Radio 24V Zone Controller and Interface Kit

Wireless Zone Controller Radio 24V Zone Controller

Wireless Zone Interface Controller Radio 24V Zone Interface Controller

Wireless Controller Remote Access Module Radio 24V Controller Remote Access Module

408.18

294.02

204.62

712.69


Heating &

Cooling C

ontrols

Uponor Room Control Components - Radio 24V


White 1000502 1

Silver 1000504 1

Grey 1046114 1

Push button operation for temperature control from +5°C to +35°C. Allows the user to view the current ambient temperature or the set point temperature via the LCD display. Two standard AAA batteries are included.


Mounting Kit - White 1000503 1

Mounting Kit - Silver 1000505 1

Mounting Kit - Grey 1046115 1

Table stand and wallplate with adhesive sticker for sticking to smooth surfaces.


White 1058385 1

The dial thermostat is an easy-to-use wireless thermostat that incorporates conventional thumb wheel control to adjust the room temperature set point. 2x AAA batteries included.


White 1045572 1

This is a tamper proof thermostat designed for public areas or for user/occupant restriction purposes. It can also be used as a wireless outdoor sensor for the Climate Controller. Can also be connected to a floor sensor ( 1000538 ).


Wireless Digital Thermostat Radio 24V Digital Thermostat

Mounting Kit for Wireless Digital Thermostat Mounting Kit for Radio 24V Digital Thermostat

Wireless Dial Thermostat Radio 24V Dial Thermostat

Wireless Public Thermostat Radio 24V Public Thermostat

49.32

70.85

63.67

80.58

70.19

4.52

12.28

6.04

1 0 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Room Control Components - Wired 24V


Controller 400 1000534 1

Wiring and relay centre for controlling of up to 14 x 24V actuators via a maximum of 12 wired thermostats. The unit has an in-built 230-24V transformer with two relays. For time controlled setback the Wired 24V Timer should be used.


White 1048013 1

The Wired 24V Timer offers two timed setback programs. The unit has a large LCD screen with a simplified visual display of Comfort or ECO setting. Also has a facility for external forced ECO mode available via the remote access module (1046485).


White 1058387 1

Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature (1000538).


White 1048011 1

Wired 24 V digital thermostat with large LCD screen and simple menu navigation. For time control use in conjunction with the Wired 24V Timer (1048013). A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature (1000538). Also includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)


White 1000537 1

The thermostat dials are hidden by a cover which needs to be removed before adjustments can be made. The public thermostat also allows control over the minimum or maximum floor temperature when used with a floor sensor (1000538).


Wired Zone Controller Wired 24V Zone Controller

Wired Controller Timer Wired 24V Controller Timer

Wired Public Thermostat Wired 24V Public Thermostat

Wired Dial Thermostat Wired 24V Dial Thermostat

Wired Digital Thermostat Wired 24V Digital Thermostat

uPoints

400

60.58

27.85

27.85

82.06

139.61

1 0 1e n q u i r i e s . u k @ u p o n o r. c o m

Heating &

Cooling C

ontrols

Uponor Room Control Components - Wired 24V


White 1048012 1

Programmable digital thermostat with 5/2, 6/1 & 7 day groups for programming between ECO and COMF setting. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature (1000538). Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)

15m Installation Cable


Cable 1000515 1

15m twisted pairs cable to connect from the interface to the controller, from one controller to another or to be used as an extension for the antenna cable.


Kit 1000514 1

Spare part cable kit consisting of: • 3m Cable for connecting from the antenna to the radio 24V zone controller• 0.3m Cable for connecting from the antenna to radio 24V zone controller• 2m Cable for connecting from the Interface radio 24V zone interface controller




Did you know...Did you know that our 12v and Radio DEM controls can work in either heating or cooling mode.

Ideal for both heating and cooling

Uponor Room Control Components - Radio 24V & Wired 24V Accessories




Wireless Public Therm Cable Kit ostat Radio 24V Cable Kit

Thermal Actuator Vario B Thermal Actuator

Wired Programmable Digital Thermostat Wired 24V Programmable Digital Thermostat

29.25

67.31

32.78

10.35

1 0 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Room Control Components - Radio 24 & Wired 24 Accessories

Remote Floor Sensor


4m 1000538 1

Floor sensor attached to a 4m cable for use with the thermostats to enable control over the maximum or minimum floor temperature.

Thermostat Wall Plate


90 x 90mm 1000539 1

For use with radio 24V/wired 24V dial and public thermostats to cover standard wall boxes.

22.79

2.20


Heating &

Cooling C

ontrols

Uponor Controls - 12V STATPACKS

column 1 column 2 column 3 column 4 column 5 column 6

Choose your pack...• Select the number of zones your heating system is controlling from column 1.

• Column 2 and column 3 list the available thermostat combinations for each pack. Read across the table and select the combination required.

• Column 4 and column 5 list the pack product code and pricing*.

• Finally add the number of manifold actuators and 12V thermostat remote sensors to your chosen STATPACK.

* Note: Every pack includes a wiring centre for controlling up to 12 zones and 14 loops. Packs also contain an Wired Timer for setback temperature control.

Underfloor Heating Systems - Controls

Wired 24V digital thermostat with large LCD screen and simple menu navigation. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature (1000538). Also Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)

Wired 24V Digital Thermostat

White 1048011

Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature.

Wired 24V Dial Thermostat

Zones Dial Stat Digital Stat uPoints Pack Code

2 2 - 1000 1057095

- 2 1000 1057096

3 3 - 1000 1057097

- 3 1000 1057098

4 4 - 1000 1057099

- 4 1000 1057100

5 5 - 1000 1057101

- 5 1000 1057102

6 6 - 1000 1057103

- 6 1000 1057104

7 7 - 1000 1057105

- 7 1000 1057106

8 8 - 1000 1057107

- 8 1000 1057108

White 1058387

uPointsPack Price

List (£)

249.65

308.56

274.72

363.09

299.79

417.61

324.86

472.12

349.93

526.65

375.01

581.18

400.07

635.71

1 0 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Room Control Components - Wired 230V Controls & Accessories


White 230V 1047456 1

For controlling up to 8 room stats and 16 manifold actuators. Includes two volt free relays for pump and boiler control. Night setback facility when used with remote time clock.


White 230V 1058425 1

Modern slim design only 13mm depth after installation. Energy saving feature calculates heat up time of system. Includes holiday mode, temporary over-ride and specified duration, 5/2 or 7 day programme, floor temperature control, lock facility, status display on current thermostat mode.


White 230V 1047457 1

Multi-purpose LCD and dial thermostat with remote sensor and setback facility.Includes, air and remote sensing or remote sensing only, regulation and protection of floor temperature, lock facility, status display on current thermostat mode.


3m 1047459

Optional 3m long sensor for control and regulation of remote temperatures of remote temperature.

Controlled by the 230V wiring centre for loop and zone regulation. One required per manifold port/loop


230V Thermal Actuator, TM/LS Manifold 1013006 1




230V Wiring Centre Wired 230V Wiring Centre

230V Digital Programmable Thermostat Wired 230V Digital Programmable Thermostat

Wired Dial Thermostat Wired 230V Dial Thermostat

Remote Sensor Wired 230V Remote Sensor

230V Thermal Actuators Wired 230V Thermal Actuators

28.49

22.79

41.23

64.79

139.61


Heating &

Cooling C

ontrols

Uponor Room Control Components - Wired 230V Controls & Accessories


White 1002131 1

5/2 day programmable thermostat with up to 6 time and temperature changes each day. Battery powered.


White 1002133 1

230V single channel time switch with volt free output. Used with the wiring centre to provide either 7 day, 24hr or 5/2 day temperature setback on the digital dial thermostat. Program copy and over-ride features included with a back-light display.


White 1002130 1

12 way connector


230V 1002047 1

230V power open/spring return zone valve, complete with auxiliary switch.


Boxed Zoned Control Set 1002134 1

Boxed zoned control pack comprising of programmable thermostat, 2 port zone valve and 12 way wiring box, offering time and temperature control to single zone underfloor heating systems.

230V Programmable thermostat Wired 230V Programmable thermostat

230V Time Clock Wired 230V Time Clock

Junction box Wired 230V Junction box

Motorised 2 port zone valve Viva Motorised 2 port zone valve

Single zone control pack Wired 230V Single zone control pack

115.14

89.16

14.92

91.77

193.00

1 0 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Hea

ting

& C

oolin

g C

ontr

ols

Uponor Controls - 230V STATPACKS

Choose your pack...• Select the number of zones your heating system is controlling from column 1.

• Column 2 and column 3 list the available thermostat combinations for eachpack. Read across the table and select the combination required.

• Column 4 and column 5 list the pack product code and pricing*.

• Finally add the number of manifold actuators and 230V thermostat remote sensors to your chosen 230V STATPACK.

* Note: every pack includes a wiring centre for controlling up to 8 zones and 16 loops. Packs with Digital Dial thermostats also include a single channel time clock for timed setback temperature control.

Underfloor Heating Systems - Controls

column 1 column 2 column 3 column 4 column 5 column 6

ZonesDigital

Dial Stat Programmable

Digital Stat uPoints Pack Code

2 2 - 1000 1047700- 2 1000 1047701

3 - 1000 1047702

3 - 3 1000 10477032 1 1000 1047704

4 - 1000 1047705

4 - 4 1000 1047706

3 1 1000 10477072 2 1000 1047708

5 - 1000 1047709

5 - 5 1000 1047710

4 1 1000 10477113 2 1000 1047712

6 - 1000 1047713

6 - 6 1000 1047714

4 2 1000 10477153 3 1000 1047716

7 - 1000 1047717

7 - 7 1000 1047718

5 2 1000 10477194 3 1000 1047720

8 - 1000 1047721

- 8 1000 1047722

8 6 2 1000 1047723

5 3 1000 10477244 4 1000 1047725

uPointsPack Price

List (£)

280.11

322.51

317.21

380.81

338.41

354.31

439.13

375.52

396.73

391.42

497.44

412.62

433.83

428.53

555.76

470.94

492.14

465.63

614.07

508.05

529.24

502.74

672.37

545.16

566.36

587.56


Energy Systems

Tap into an endless source of renewable energy with Uponor collector pipes. Suitable for use in conjunction with all Uponor systems, our horizontal collector pipes for ground energy have a 50 year design life and require no special tools.

• Energy System Collector Pipe 108 • Energy System Fittings & Accessories 109

1 0 7

Ener

gy S

yste

ms

1 0 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ener

gy S

yste

ms


1002166 1

40mm. L = 1m


40x2.4 100m 1048224 1

40x2.4 200m 1048225 1

40x2.4 250m 1048227 1

40x2.4 300m 1048226 1

40x2.4 400m 1048228 1

40x2.4 500m 1048229 1


1002163 1

Pressure sealed 138-168mm


1002164 1

40mm with air bleeder

Pipe available to order on lead time, typically 2 weeks.

Energy Systems - (Collector Pipe for GSHPs)

Energy Systems - Fittings & Accessories




Single collector for ground energy Geo Hortis Single collector for ground energy

Rubber hood Geo Vertis Rubber hood

Tee pipe with air bleeder Geo Tee pipe with air bleeder

Wall elbow Geo Wall elbow

100.57

221.32

442.66

663.98

553.33

885.32

1,106.64

30.32

26.89


Energy Systems


Snap-in lid


1002367 1

315mm for inspection chamber

Return elbow


1002160 1

With mounting ring for bottom weight or hauling rope. Pipe connection 40mm.


1002167 1

For lowering the return collector into the bore hole> Ø 85mm x 0.5 long = 12kgMultiple weights can be used.


1002162 1

2 metres for 40mm pipe

Round bottom weight Geo Round bottom weight

Tubolit insulation DG 42/9 Geo pipe tubolit insulation DG 42/9

6.92

48.22

37.52

5.75

1 1 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Ener

gy S

yste

ms


40mm 1002138 1

MDPE Compression Fitting


40mm x1” 1002146 1

40mm x1¼” 1002147 1



40mmx1”x40mm 1002143 1

40mmx1¼”x40mm 1002368 1



40mm 1002145 1



40mm 1002142 1



Straight coupling Geo Straight coupling

Female thread adapter Geo Female thread adapter

Female thread take off tee Geo Female thread take off tee

End plug Geo End plug

Equal tee Geo Equal tee

19.36

19.36

32.84

35.85

39.46

17.32

45.99


Energy Systems



40mm 1002141 1



40mmx1” 1002139 1

40mmx1¼” 1002140



40mmx1¼” 1002144 1





90O Elbow Geo 90O Elbow

Male thread adapter Geo Male thread adapter

Female thread elbow Geo Female thread elbow

24.50

32.89

17.61

19.36

1 1 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Q&E TOOL DEALS MLCP TOOL DEALS

Contact your Uponor representative or speak

to your local plumbers or builders merchant today

for more details.

www.uponor.co.uk

Press Mini 32 Pressing Tool for MLC

1007096

Milwaukee Expander Tool Set

1057166

Come and see us!For a full list of exhibitions and events visit www.uponor.co.uk

e n q u i r i e s . u k @ u p o n o r. c o me n q u i r i e s . u k @ u p o n o r. c o m

Tools and Accessories

Using our tools and accessories ensures full system warranty. That means we have tested the entire system range of pipes, fittings, and pressing jaws as a complete system. Special deals available on tool purchases and hire. Contact your Uponor representative or speak to your local plumbers and builders merchant for more details.

Plumbing

• MLC Tools 114

• Q&E PEX Tools 118

Underfloor Heating

• MLC Tools 120

• Q&E PEX Tools 121

• General Tools 122

1 1 3

Tool

s an

d A

cces

sori

es

1 1 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Plu

mbi

ng T

ools

and

Acc

esso

ries Plumbing - MLC Tools and Accessories

MLC pliers


Pipe cutting pliers 12-20mm 1006636 1

Spare blades for cutting pliers 1006637 1

Special pipe cutting pliers for Uponor MLC with an outer diameter of 12-20mm; with corrugated tube cutting attachment.

Pipe cutter


Pipe cutter 14-32mm 1013719 1

Spare cutting blade 1013721 1

Pipe cutter for use with Uponor MLC.

Pipe cutting tool


Pipe cutting tool 25-63mm 1006634 1

Spare cutting disc 1006635 1

Pipe cutting tool 50-110mm 1014171 1


Cutting tool for use with Uponor MLC.


12mm 1015837 1

16mm 1006830 1

20mm 1015749 1

25mm 1015756 1

Installation tool for the bevelling of Uponor MLC. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).


32mm 1015762 1

40mm 1006638 1

50mm 1015808 1

63mm 1014339 1

75mm 1014344 1





Bevelling tool 12-25 MLC Bevelling tool 12-25

Bevelling tool 32-75 MLC Bevelling tool 32-75

21.50

8.64

28.07

2.44

51.48

3.97

23.76

8.41

8.71

10.03

13.81

20.60

23.44

28.83

37.89

31.05

5.16


Plum

bing Tools and Accessories

Plumbing - MLC Tools and Accessories


16/20/25mm 1015739 1

Installation tool for the bevelling of Uponor MLC.


12mm 1013726 1

16mm 1013729 1

20mm 1013734 1

25mm 1013737 1

32mm 1013739 1

Bending spring for use with Uponor MLC.


16mm 1006640 1

20mm 1013792 1

25mm 1013794 1

Bending spring for use with Uponor MLC.


16,20,25,32 1013773 1

Bending tool for producing series of identical curves in Uponor MLC, supplied in carrying case complete with set of bending inserts.

Supplied in carrying case, complete with battery and charger unit. Range of application: 12-110mm.


Press tool 1006827 1

Spare Battery 12V/3Ah 1006949 1

Spare re-charging unit 1006950 1

3-size bevelling tool MLC 3-size bevelling tool

Inside bending spring MLC Inside bending spring

Outside bending spring MLC Outside bending spring

Bending tool 16-32mm MLC Bending tool 16-32mm

Battery pressing tool UP 75 Press Battery pressing tool UP 75

2.93

1.87

1.91

3.18

3.93

2.61

2.34

3.21

10.75

149.03

947.44

57.21

61.51

1 1 6 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Plu

mbi

ng T

ools

and

Acc

esso

ries Plumbing - MLC Tools and Accessories

Jaws for use with Uponor MLC press fittings, for use with UP75.

Pressing chain for use with 63-110mm Uponor MLC Press Fittings, to be used inconjunction with UP75 pressing tool and base pressing unit.


16mm 1007084 1

20mm 1007086 1

25mm 1007087 1

32mm 1007088 1

40mm 1015768 1

50mm 1015792 1


63mm pressing chain 1046541 1




Base pressing unit


63-110mm base pressing unit 1046545 1

To be used with Mini 32. Note: Cannot be used with Uponor MLC Modular fittings.

An alternative to the existing UP75 battery pressing tool, the Mini 32 can press all existing metal and composite press fittings from 12mm up to 32mm, without the need for external power (External power needed to charge batteries).Note: Cannot be used with Uponor MLC Modular fittings.


Press Tool (excl. jaw sets) 1007096 1

Spare Battery 9.6V/2.0Ah 1015703 1

Spare re-charging unit 1006950 1


12mm 1007089 1

16mm 1007091 1

20mm 1007093 1

25mm 1007094 1

32mm 1007095 1

Pressing jaws Press Pressing jaws

Pressing chain Press Pressing chain

Mini 32 Pressing Tool for MLCP Press Mini 32 Pressing Tool for MLC

Mini jaw set Press Mini jaw set

58.2358.2358.2358.23

110.12115.85

385.87

460.74

575.93

691.12

167.02

63.2963.2963.2967.4867.48

601.8560.1861.51


Plum


Plumbing - MLC Tools and Accessories

For fitting to the manual pressing tool for the handling of 12-20mm Uponor MLC press fittings.


12mm 1002128 1

16mm 1015777 1

20mm 1015780 1

Reusable plug with ½“ FT designed for pressure-testing of Uponor MLC installations.

Tool set 63–110Set consists of pipe cutting tool and bevelling tool suitable for use with Uponor MLC (outer diameter: 63-110mm). Supplied in carrying case.

For the fast, simple, straight alignment of Uponor MLC supplied in coils (14mm to 32mm). Adjustable to the desired size. Can be used in combination with the Uponor MLC uncoilers.


12mm 1013752 10

16mm 1013756 10

20mm 1013760 10

25mm 1013762 10

32mm 1013764 5

40mm 1013765 2


63-110mm 1014322 1



Pipe straightner 1010512 1

Designed for use with Uponor MLC 12-20mm press fittings (in conjunction with inserts for manual pressing tool). Supplied in carrying case without inserts for pressing tool.


12-20mm 1015764 1




Pressure test plug MLC Pressure test plug

Manual pressing tool Press Manual pressing tool

Inserts for manual pressing tool Press Inserts for manual pressing tool

Pipe straightener MLC Pipe straightener

29.9731.4631.46

2.911.671.731.804.04

10.61

152.81

444.7140.54

156.41

1 1 8 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Plu

mbi

ng T

ools

and

Acc

esso

ries

Plastic pipe cuttersCost effective evalPEX pipe cutters to leave the perfect jointing finish.




Includes 1x 230V, 50Hz fast battery charger, 2x12V /1.5Ah Li-ion Batteries, 1x 100g tube of Molykote tool lubricant, 1x operation manual, 1x lightweight plastic case. Expander heads included.

Pipe and conduit cutterThis tool is specially designed for cutting pipe-in-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.


M12 Expander tool Set 1057166 1

Spare 16mm head 1057172 1



Spare M12 battery 3.0Ah 1061185 1

Spare M12 charger 1057410 1


30g 1008334 1


Cutter 1009031 1

Plumbing - Q&E PEX Tools and Accessories

Spanner


25mm open spanner 1034109 1

For use with ½” compression adapters when connecting to manifolds.

Milwaukee expander tool set Q&E Milwaukee expander tool set

Graphite paste 30gm tube Q&E Graphite paste 30gm tube

NEW




8.95

29.72

478.80

52.00

52.00

52.00

60.00

60.00

3.60

27.19

39.00


Plum


Plumbing - Q&E PEX Tools and Accessories

Use to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.


5 Litres 25 BAR 1004057 1

Complete tool set in a box. Includes all 3 expander heads and instructions.


3 Heads (16, 20, 25mm) 1004000 1

Used in conjunction with item 1004000


Autorotation head 1038188 1

Hydraulic test pump Multi Hydraulic test pump

Uponor PEX hand tool set and heads Q&E Uponor PEX hand tool set and heads

Autorotation head Q&E Autorotation head

133.88

358.80

104.16

1 2 0 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting

Too

ls a

nd A

cces

sori

es Underfloor Heating - MLC Tools and Accessories


16mm 1006830 1


Polystyrene hot cutter


110V 1006293 1

230V 1006290 1

Ideal for use when installing floating floor panels to cut extra grooves and channels in the insulation. Supplied head cuts 16mm groove. Optional 20mm head available (1002072).

Pressure test plugReusable plug with ½“ FT designed for pressure-testing of Uponor MLC installations.


16mm 1013756 10

MLC pliers


Pipe cutting pliers 12-20mm 1006636 1

Spare blades for cutting pliers 1006637 1

Special pipe cutting pliers for Uponor MLC with an outer diameter of 12-20mm; with corrugated tube cutting attachment.

Pipe cutter



Spare cutting blade 1013721 1

Pipe cutter for use with Uponor MLC.

Bevelling tool 16mm MLC Bevelling tool 16mm

Depth gauge marker


1014118 1

21.50

8.64

31.05

5.16

101.40

90.35

8.41

1.67

0.95


Underfl

oor Heating Tools and A

ccessories

Underfloor Heating - EvalPEX Tools and Accessories

Optional 20mm head only for cutting extra pipe channels into Comfort Pipe Plus (PEX 20) floating floor panels to fit 20mm diameter pipe. For connection to polystyrene hot cutter 1006290 230V or 1006293 110V.

Pipe and conduit cutterThis tool is specially designed for cutting pipe-in-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.


20mm head 1002072 1


Cutter 1009031 1

Plastic pipe cuttersCost effective evalPEX pipe cutters to leave the perfect jointing finish.




For all Uponor pipe from 15mm to 20mm (multi-layer composite pipe and cross-linked polyethylene pipe) to all common UK underfloor heating insulation boards. For use with Kombi Klips 1002296 and 1002297.


Kombi Gun 1002295 1

Underfloor Heating - General Tools and Accessories

Use to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.


5 Litres 25 BAR 1004057 1




Polystyrene hot cutter head (20mm) Siccus 20 Polystyrene hot cutter head

Hydraulic test pump Multi Hydraulic test pump

Kombi gun Tacker Kombi gun

8.95

29.72

40.79

27.19

133.88

110.65

1 2 2 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Und

erfl

oor

Hea

ting

Too

ls a

nd A

cces

sori

es Underfloor Heating - General Tools and Accessories

Wide tape for sealed joining of Uponor insulation products.Roll width: 50mmRoll Length: 66m

For taping of insulation sections and edges.For use with tape 1000012


Tape dispenser 1000142 1


Width 50mm x Length 66m 1000012 1

Suitable for both evalPEX and MLC pipes. Includes coil retention arms and de-coiling eyelet. Can be used for all diameters up to 25mm.

Suitable for both evalPEX and MLC pipes. Includes coil retention arms and de-coiling eyelet. Can be used for all diameters up to 25mm.


De-coiler 1058663 1


De-coiler 1058662 1

NEW

NEW




Uponor Tape Multi Uponor Tape

Uponor Tape Dispenser Multi Uponor Tape Dispenser

Pipe De-coiler Multi Pipe De-coiler

Mobile Pipe De-coiler Multi Mobile Pipe De-coiler

187.84

221.84

21.39

4.43


Comprehensive installer, design and control courses available at the Uponor Training Academy.

All courses are held at our purpose built facility close to J20 M1, in the market town of Lutterworth.

Training Academy: 01455 551363Uponor Head Office: 01455 550355email: [email protected]

www.uponor.co.uk

• UFH Installer Course A two-day course at our purpose-built facility

in Lutterworth. The course is aimed at both new and experienced users of our products. Day 1 gives a thorough understanding of applications of UFH in our theory suite. Day 2 follows with practical exercises in our hands-on practical suite.

• Design Considerations & Controls Course Recommended as a follow-up to the UFH

Installer course, this course is usually aimed at experienced installers and gives a basic understanding of system requirements from a design point of view. You will also have the opportunity to look at any new Uponor products which are now available.

• Controls Wiring Course Uponor has recently launched a range

of innovative water temperature and air temperature controls. Consequently, we are now offering an informative course aimed at installers and electricians, who wish to increase their product knowledge with respect to Uponor control systems.

• Merchant Course A course which gives an overview of Uponor

products and their applications. Mainly aimed at Merchants but can be specifically tailored to give a bespoke course for installers, or anyone who requires specific guidance in the application of UFH or Plumbing. Please contact us to discuss your requirements.

All courses include:* Course Materials * Uponor delegate packs * Exclusive ‘on the day’ Tool Deals * Lunch

1 2 4 C o n t a c t u s o n 0 1 4 5 5 5 5 0 3 5 5

Uponor - Conditions of Sale 1. Interpretation In these conditions-

Buyer means the company, firm, body or person buying the Goods and/or services or

whose order for the Goods and/or Services is accepted by the Supplier;

Conditions means the terms and conditions set out in this document and include any special

terms and conditions agreed in writing between the Buyer and the Supplier; any special terms shall prevail;

Contract means the contract for the sale of the Gods and/or Services to be provided by the

Supplier pursuant to the Contract;

Goods mean the goods the Supplier agrees to supply;

Services means the Services the Supplier agrees to supply;

Supplier means Uponor Limited or any other Uponor Group Company

Writing includes fax, e-mail and other comparable means of communication

1.2 Any reference in these conditions to any provision of a statute shall be construed as a reference to that provision as amended, re-enacted or extended at the relevant time.

1.3 Any reference to any English legal concept or term shall, where relevant, be deemed to apply to the nearest analogous concept or term in any other jurisdiction.

2 Basis of the Sale

2.1 The Supplier shall sell the Goods and/or Services in accordance with any written quotation of the Supplier which is accepted by the Buyer or written order of the Buyer which is accepted by the Supplier, subject in either case to these Conditions, which shall govern the Contract to the exclusion of any other terms and conditions.

2.2 No variation to these Conditions shall be binding unless agreed in Writing by an authorised representative of the Supplier.

2.3 Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Supplier shall be subject to correction without any liability on the part of the Supplier.

3 Orders and Specifications

3.1 No order submitted by the Buyer is accepted by the Supplier unless confirmed in Writing by the Supplier’s authorised representative or delivery of the Goods and/or Services by the Supplier.

3.2 The Buyer is responsible for ensuring the accuracy of the terms of any order (including any applicable specification) and for giving the Supplier any necessary information relating to the Goods and/or Services within a sufficient time to enable the Supplier to perform the Contract in accordance with its terms.

3.3 The quantity, quality and description of and any specification for the Goods and/or Services are those set out in the Supplier’s quotation or the Buyer’s order (to the extent accepted by the Supplier).

3.4 If the Goods are to be manufactured or any process is to be applied to the Goods by the Supplier in accordance with a specification submitted by the Buyer, the Buyer shall indemnify the Supplier against all loss, damages, costs and expenses incurred by the Supplier in connection with any claim for infringement of any patent, copyright, design, trade mark or other intellectual property rights. The Supplier gives no warranty that any Goods based on the specification of the Buyer will be fit for their intended purpose.

3.5 The Supplier may make any changes in the specification of the Goods and/or Services which are required to conform to any applicable statutory or EC requirements or which do not materially affect their quality or performance.

3.6 No order which has been accepted by the Supplier may be cancelled by the Buyer, except with the agreement in Writing of the Supplier and on terms that the Buyer indemnifies the Supplier in full against all loss (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Supplier as a result of cancellation.

3.7 All drawings, designs, specifications and other information provided by the Supplier are confidential and all rights of copyright ownership and other intellectual property rights in respect of them shall remain vested in the Supplier and shall not pass to the Buyer.

4. Price of Goods

4.1 The price of the Goods and/or Services shall be the price specified on the Supplier’s confirmation of order or, if none, the price specified in the Supplier’s quotation or, if none, the Supplier’s published price list current at the date of supply of the Goods and/or Services shall apply.

4.2 The Supplier may vary the price of the Goods and/or Services at any time before delivery to reflect any change in the cost to the Supplier which is due to any factor beyond the control of the Supplier (including, without limitation, foreign exchange

fluctuation, currency regulation, increase in the costs of labour, materials or other costs of manufacture), any change in delivery dates, quantities or specifications for the Goods and/or Services which is requested by the Buyer, or any delay caused by any instructions of the Buyer or failure of the Buyer to give the Supplier adequate information or instructions.

4.3 All prices are given by the Supplier on an ex works basis and exclude VAT and other duties and the Buyer shall be liable to pay those duties and (subject to condition 6.6) the Supplier’s charges for transport, packaging and insurance.

4.4 The Supplier may sue the Buyer for the price of the Goods, notwithstanding that title to them has not passed to the Buyer.

5. Terms of Payment

5.1 The Supplier may invoice the Buyer at any time for the price of the Goods and/or Services or part of it and, without limitation, may invoice the Buyer in respect of any instalment of an order. Unless the Supplier specifies otherwise (in writing), the Buyer shall pay the invoice (in full without any set off, deduction or counterclaim) within 30 days of the end of the calendar month in which the invoice is dated. Time of payment of the price shall be of the essence of the Contract.

5.2 If the Buyer fails to make any payment by the due date or the Supplier has reasonable grounds for believing that the Buyer will not make any payment then, without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries to the Buyer.

5.3 If the Buyer fails to make any payment on the due date then without prejudice to any other right or remedy available to the Company the Company shall be entitled to charge the Buyer interest (both before and after any judgment) on the amount unpaid at the rate of 8% per annum above Bank of England base rate from time to time until payment is made (a part of a month being treated as a full month for the purpose of calculating interest)

6. Delivery and Performance

6.1 Unless otherwise agreed in Writing by the parties, delivery of the Goods shall be made by the Supplier “ex works” as that term is defined in “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.

6.2 Any dates quoted for delivery of the Goods and/or Services are approximate only and the Supplier shall not be liable for any delay in delivery of the Goods and/or Services.

6.3 If the Supplier fails to deliver the Goods or Services (or any instalment) and the Supplier is liable under these Conditions, the Supplier’s maximum liability shall be the excess (if any) of the cost to the Buyer of similar goods or services to replace those not delivered or performed over the price of the Goods or Services.

6.4 If the Buyer fails to take delivery of the Goods or fails to give the Supplier adequate delivery instructions then, without prejudice to any other right or remedy available to the Supplier, the Supplier may store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage and/or sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.

6.5 The Buyer shall comply with all laws governing the importation of the Goods into the country of destination.

6.6 The Supplier will not accept any order for goods which has a nett value of under £500.00 (excluding VAT and delivery) other than an order for products from its “Spares List”.

6.7 The Buyer shall be liable to pay the Suppliers charges for transport of the Goods where:

6.7.1 The Suppliers net invoice value (excluding VAT and delivery costs) is between £300.00 and £500.00. In this instance the cost of carriage will be limited to £25.00

6.7.2 The goods ordered by the Buyer are specified as being required on a next day delivery. Where a next day service is required customers should contact the supplier for a delivery charge quotation. Delivery will be charged on a cost basis whether this is to the Buyers address or that of a third party.

6.7.3 Delivery of the goods is requested to site or another third party address other than on a next day service. Where this is requested the following charges shall apply;

Net Invoice value £500 - £999 Carriage charge £50.00

Net Invoice value £1000 - £2999 Carriage charge £75.00

Net Invoice value over £3000 Free

6.7.4 Where a next day service is required customers should contact the supplier for a delivery charge quotation.

6.8 Any alteration to condition 6.7(.1 to .4) must be agreed and confirmed in writing by the Supplier.

6.9 Retention to title: Goods remain the property of Uponor Limited until paid for in full. Any query regarding this delivery should be notified in writing to Uponor Limited within 3 working days of receipt of the goods.

7. Risk and Property

7.1 Risk of damage to or loss of the Goods shall pass to the Buyer at the time of delivery or, if the Buyer wrongfully fails to take delivery the time when the Supplier has tendered delivery of the Goods. The Buyer should insure the Goods


Uponor - Conditions of Saleaccordingly.

7.2 Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these Conditions, the property in the Goods shall not pass to the Buyer until the Supplier has received in cash or cleared funds payment in full of the price of the Goods and all other goods and services agreed to be sold by the Supplier to the Buyer for which payment is then due.

7.3 Until such time as the property in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Supplier’s fiduciary agent and bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored, protected and insured and identified as the Supplier’s property, and shall not be entitled to dispose of the Goods.

7.4 Until such time as the property in the Goods passes to the Buyer, the Supplier may at any time require the Buyer to deliver up the Goods to the Supplier and, if the Buyer fails to do so forthwith, enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.

8. Warranties and Liability

Warranties

8.1 Subject to the conditions set out below, the Supplier warrants that the Goods will correspond with their specification at the time of delivery and will be free from defects in material and workmanship for a period of 12 months from delivery.

8.2 This warranty is given by the Supplier subject to the following conditions:

8.2.1 the Supplier shall be under no liability in respect of any defect arising from any drawing, design or specification supplied by the Buyer;

8.2.2 the Supplier shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Supplier’s instructions (whether oral or in Writing), misuse or alteration or repair of the Goods without the Supplier’s approval;

8.2.3 this warranty does not extend to parts, materials or equipment not manufactured by the Supplier, in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Supplier.

8.3 Subject as expressly provided in these Conditions, all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. Without limitation, the Supplier does not warrant the accuracy or otherwise of any design, drawing, specification, instructions, other information or advice that it provides as part of the Services and/or as ancillary information in relation to the Goods.

8.4 Any claim by the Buyer which is based on any defect in the quality or condition of the Goods or their failure to correspond with specification shall be notified in writing to the Supplier within 7 days of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure, but, in any event, within 12 months of delivery. If delivery is not refused, and the Buyer does not notify the Supplier accordingly, the Buyer may not reject the Goods and the Supplier shall have no liability and the Buyer shall pay the price as if the Goods had been delivered in accordance with the Contract.

8.5 Where any valid claim is made in accordance with this Clause 8, the Supplier may replace or repair the Goods (or the part in question) or re-supply the Services (or the part in question) free of charge or, at the Supplier’s sole discretion, refund to the Buyer the price of the Goods or Services (or part of it), but the Supplier shall have no further liability to the Buyer.

General Liability

8.6 Notwithstanding anything else in this Contract, neither party’s liability in respect of death or personal injury caused by that party’s negligence shall be limited.

8.7 The Supplier shall not be liable to the Buyer for loss of contracts, profits, anticipated savings, revenue, business, stoppage to other work or indirect or consequential loss (whether caused by the negligence of the Supplier, its employees or agents or otherwise) in connection with this Contract.

8.8 Notwithstanding any other provision in the Contract except Condition 8.5, the entire liability of the Supplier under or in connection with the Contract shall not exceed the sum paid to the Supplier by the Buyer for the Goods or the Services (or both, where both Goods and Services are to be supplied) which are the subject of the claim in question by the Buyer.

8.9 The Supplier shall not be liable for any breach of its obligations to the extent that the Supplier is prevented or hindered from complying with them by “Force Majeure”.

8.10 “Force Majeure” means any cause beyond the reasonable control of the Supplier including (without limitation) strikes, lock-outs, labour

9. Insolvency of Buyer

9.1 Without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries without any liability to the Buyer, if:

9.1.1 the Buyer is unable to pay its debts, makes any voluntary arrangement with its creditors or (being an individual or firm) becomes bankrupt or (being a company) becomes subject to an administration order or goes into liquidation; or

9.1.2 an encumbrancer takes possession, or a receiver is appointed, of any of the property or assets of the Buyer; or

9.1.3 the Buyer ceases, or threatens to cease, to carry on business; or

9.1.4 the Supplier reasonably believes that any of the foregoing events is about to occur in relation to the Buyer and notifies the Buyer accordingly.

9.2 If the Goods and/or Services have been delivered but not paid for and the Supplier cancels the Contract under Conditions 5.2 and/or 9, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.

10. Non-standard Orders

10.1 Where the Buyer orders Goods or materials of a type, size or quality not normally produced by the Supplier or Services not normally performed by the Supplier, the Supplier shall use all reasonable endeavours to execute the order but, without prejudice to any other provision limiting the Supplier’s liability, if it proves impossible, impracticable or uneconomical to carry out or complete the order, the Supplier may cancel the Contract or the uncompleted balance of it without penalty and the Buyer shall only be liable to pay for the part of it actually delivered or performed.

11. Export Sales

11.1 Subject to Condition 6.1, where Goods are sold on the basis of international trade terms, they shall be defined in accordance with “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.

11.2 Where Goods are sold FOB, the Supplier shall not be required to give the Buyer the notice specified in Section 32(3) of the Sale of Goods Act 1979.

11.3 Unless otherwise agreed by the Supplier in Writing, the price of the Goods and/or Services shall be secured by an irrevocable letter of credit satisfactory to the Supplier and established by the Buyer in favour of the Supplier immediately upon receipt of the Supplier’s confirmation of order form and confirmed by a United Kingdom bank acceptable to the Supplier. The letter of credit shall be for the price payable plus any duties and taxes payable to the Supplier and shall be valid for the longer of six (6) months or any period estimated by the Supplier for delivery of the Goods and/or Services.

12. Packing

12.1 Unless otherwise agreed in Writing by the parties, the price specified by the Supplier excludes the cost of packing cases and packing materials, for which the Buyer shall be additionally liable. If the Supplier notifies the Buyer that packing cases and/or materials are returnable, then the full cost of these is payable by the Buyer if the Buyer does not return them in good condition to the Supplier either (at the Supplier’s option) carriage paid or in the Supplier’s vehicle within three (3) months of their delivery to the Buyer. Where not returnable, the Buyer will dispose of all packing in accordance with the regulations (whether statutory or otherwise) relating to the protection of the environment.

12.2 The Supplier shall use all reasonable endeavours to ensure, where necessary, the appropriateness of packing before despatch, but the Supplier shall not be liable for any damage to or loss of Goods between despatch from the Supplier and delivery in accordance with this Contract.

13. General

13.1 The Supplier may perform any of its obligations or exercise any of its rights under this Contract through any other member of its group.

13.2 The Buyer may not assign any of its rights or obligations or mortgage, charge (otherwise than by floating charge) any of its rights under this Agreement without the prior written consent of the Supplier.

13.3 Each party acknowledges that, in entering into this Contract, it does not do so on the basis of and does not rely on any representation, warranty or other provision except as expressly provided in this Contract and all conditions, warranties or other terms implied by statute or common law are excluded. This condition shall only apply to the extent permitted by law.

13.4 Any notice required or permitted to be given by either party to the other shall be in Writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice.

13.5 No waiver by the Supplier of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision.

13.6 If any provision of the Contract is held by any competent authority in UK law to be invalid or unenforceable in whole or in part the validity of the other provisions of the Contract and the remainder of the provision in question shall not be affected.

13.7 A person who is not a party to the Contract has no rights under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of the Contract.

13.8 The Contract shall be governed by and construed in accordance with the laws of England, and the parties submit to the non-exclusive jurisdiction of the English courts.

13.9 When supplied as B2B EEE the producer invokes regulation 9.2 and passes all WEEE obligations to the end user.

1 2 6

Exclusively for Uponor installers – collect uPoints and get rewarded!

You have put your trust in us and our products. Now we would like to thank you – with our loyalty scheme, Uponor & more. Collect uPoints when buying selected Uponor products and exchange them for rewards.

1. Register

Register to join the scheme and enjoy the many advantages of Uponor & more!

2. Collect uPoints

uPoint vouchers are enclosed in many key Uponor products. Just enter the unique voucher code number in the Uponor & more portal at www.uponor-more.co.uk and fi ll up your uPoint account.

3. Choose rewards

Now for the best part of the Uponor & more scheme. Once you have collected enough uPoints, simply exchange them for fantastic rewards! Enjoy!

It’s so easy: www.uponor-more.co.ukIt’s so easy: www.uponor-more.co.ukIt’s so easy: www.uponor-more.co.uk

Uponor uPoint voucher and rewardsUponor voucher enclosed in many Uponor Products.

Code:uPoints:

Item:

www.uponor-more.com

Uponor & moreUponor & more Some examples of our rewards:

1 2 6


uPointsOn selected Uponor Products

1 2 7e n q u i r i e s . u k @ u p o n o r. c o m 1 2 7e n q u i r i e s . u k @ u p o n o r. c o m

Join the conversation...

@UponorUK

www.uponorblog.co.uk

UponorUK

Uponor UK

BLOG

Copyright © Uponor (Uponor Limited.)

Reproduction of any part of this publication for any purpose is not

permitted without the prior written permission of Uponor Limited.

The contents of this brochure are provided for guideline only, please

consult our technical manuals for full up-to-date information.

Uponor reserves the right to alter specifi cations and operating

parameters for all their Underfl oor Heating and Plumbing & Heating

Systems at any time as part of its policy of continuous product

development.

Care has been taken to ensure that the information in this price guide

is correct at the time of going to press. Uponor Limited reserve the

right to alter prices and the details of designs and performance of

products without notice. E&OE.

Uponor Limited (“Uponor”) guarantees [to the original purchaser/

customer] that pipes and fittings sold by it are free of defects in

materials or manufacture under normal conditions of use for a period

of 25 years and in case of electrical and mechanical products for

2 years from the date of installation. This guarantee only applies to the

products stored, installed, tested and operated in accordance with the

fitting instructions issued by Uponor and valid at the time the products

were installed.

Where a claim is made during the guarantee period and products are

proven to be defective in materials and/or manufacture at the time of

delivery, Uponor will supply replacement products free of charge. This

is the exclusive remedy under this guarantee.

Uponor disclaims any warranty or guarantee not expressly provided

for herein, including any implied warranties of merchantability or

fitness for a particular purpose. Uponor further disclaims any and all

responsibility or liability for losses, damages and expenses, including

special, direct, indirect, incidental and consequential damages, whether

foreseeable or not, including without limitation any loss of time or use

or any inconvenience arising from the ownership, installation or use of

the products sold hereunder.

This guarantee does not affect the statutory rights of the consumer.

Uponor LimitedHead OfficeGilmorton RoadLutterworthLeicestershireLE17 4DU

T 01455 550355F 01455 550366E [email protected] www.uponor.co.uk

UPG

-JU

LY-2

014-

000-

UK-

A5

Uponor priceguide july2014lr

Documents

Transcript of Uponor priceguide july2014lr