Upon instruction from the secured creditors PUBLIC … & Burner Controls ... Milwaukee Chop Saw,...
Transcript of Upon instruction from the secured creditors PUBLIC … & Burner Controls ... Milwaukee Chop Saw,...
1VISIT WWW.MAYNARDS.COM FOR MORE INFORMATION
PUBLIC AUCTIONUpon instruction from the secured creditors
Preview & Inspection: Wed. Dec. 16th from 9am - 4pm or by appt.LOCATION: 240 Pennsylvania Ave. | Salem, OH | USA
AUCTIONEERS • LIQUIDATORS • APPRAISERS
Sale conducted by
Auctioneers • Liquidators • Appraisers
21700 Northwestern HWY • Suite 1180Southfield, Michigan 48075Ph 248.569.9781 • Fx 248.569.9793 www.maynards.com
THURS, DEC. 17TH @ 10AM EST
Ravne SE4-2000-240-108 Straight Side Press
2004
15-44 SPM
2 AUCTIONS • LIQUIDATIONS • APPRAISALS
TRANSFER PRESS & SERVO FEED LINES
COE CPRF-Push-778 Servo Feeder
COE Servo Feed Line
COE CPR-50080 Decoiler
Gudel Gullwing Transfer System
COE 78” Hydraulic Shear
Ravne SE4-2000-240-108 2000 Ton Straight Side Press with COE Feedline
2004
2004
2001
3VISIT WWW.MAYNARDS.COM FOR MORE INFORMATION
TRANSFER PRESS & SERVO FEED LINES
TRANSFER PRESS & SERVO FEED LINES•2004RAVNE SE4-2000-240-108 2000 Ton Straight Side Double Crank Press, S/N 500091, Stroke 24”, Strokes per Minute 15-44 Variable, Bed 108” x 240”, Shut Height to
Bolster 60”, Motorized Adjustment 18”, Full Tonnage 1/2” BDC, Two (2) Rolling Bolsters, Hydraulic Overloads, Ram Locking Mechanism, CNC Touch Screen Controls, Helm Autograph SCM Series Touch Screen Display, Motor 200 HP, Windows 82” Wide x 86” High; Gudel Gullwing Transfer w/HMS Transfer Fingers for Transfer & Blank Load
• 2004COE 50,000# x 78” x .197” Servo Feed Line - Mdl CPR-50078 Uncoiler, S/N 36272-4, Capacity 50,000# x 78” Wide, ID 19.75” - 24.75”, Hydraulic Expansion, OD 72”, Brake, Backing Plate; Mdl CPTCC-50078 Travelling Coil Car, 10” Coil Riser Block; Mdl CPPS-400-78 Straightener, S/N 36272-3, Capacity 78” x .190”, 7 Straightening Rolls - 4” Diameter, Entry & Exit Pinch Rolls - 6.29” Diameter, 40 HP Vari-Speed Drive, Hold Down, Peeler; Mdl CPDTT-7820 Two-Sided Threading Table; Mdl CPRF-Push-778 Servo Feed, S/N 36272-1, Roll Diameter 7”, Cabinet Base, Servo Master Control; Hydraulic Shear, Width 78”
•2001COE 50,000# x 80” Servo Feed Line - Mdl CPR-50080 Uncoiler, S/N 27461-2, Width 80”, Motorized Reel w/Loop Sensor, ID 20” - 26”, Hydraulic Expansion, OD
Danly S4-300-108-72 Straight Side Press
Tree VMC 1060 Machining Center
FPT LEM937L CNC Boring Mill
FPT LEM936L CNC Boring Mill
Charmilles Robofil 290P Wire EDM
Bliss SE2-800-132-60 Straight Side Press
2004
2 AVAILABLE
2 AVAILABLE
2 AVAILABLE
4 AUCTIONS • LIQUIDATIONS • APPRAISALS
CNC HORIZONTAL BORING MILLS • CNC VERSMILLS • VERTICAL MACHINING CENTERS
72”, Keepers, Powered Hold-Down Arm; Travelling Coil Car, Coil Riser; Mdl CPRF-880 Servo Feed-Straightener, S/N 27461-1, 7 Straightening Rolls, Motorized Entry Pinch Rolls, Coe Servo Master Console Control, Feed Rolls 8” Diameter, Cabinet, Thickness Capacity is .118” x 80”
• BLISS SE2-800-132-60 800 Ton Straight Side Double Crank Press, S/N CN-2768, Stroke 24”, Strokes per Minute 14, Bed 60” x 132”, Shut Height 69”, Motorized Adjustment 15”, T-slotted Bolster Plate 9”, Recirculating Lube, Windows 34”, Air Cushions, Helm Loadguard Trend Series 4 Monitor, Bliss AddVantage Brake Monitor & Console,
• DANLY S4-300-108-72 300 Ton Straight Side 4-Point Press, S/N 77362201, Stroke 24”, Strokes per Minute 20, Bed 72” x 108”, Shut Height 62” w/24” Risers, Motorized Adjustment 6”, T-slotted Bolster Plate 8”, T-slotted Slide Plate
•MINSTER S2-300-108-60 300 Ton Straight Side Double Crank Press, Bed 60” x 108”, Windows 21”, Rolling Bolster, Riser in Uprights 26” High, Helm Loadguard Monitor, Cieco Linear Position Indicator
CNC HORIZONTAL BORING MILLS • (2) FPT LEM 937L CNC Horizontal Boring Mill,
3-Axis w/2-Axis Head; T-slotted Table 49.5” x 157.5”, FPT M2 Control; Mdl HPX10 Pendant, Metal Gennari Chip Conveyor
• (2)FPTLEM 936L CNC Horizontal Boring Mill, S/N 93794028, 3-Axis w/2-Axis Head; T-slotted Table 51” x 138”, Travels: X-118”, Y-47.2”, A-59”; Fidia C20 Control, S/N PCD396; Pendant Mdl HPX10; One w/Heidanhain Control
•1998FPT 2-Axis Heads, Mdl FPT 100, S/N 19954
CNC VERSAMILLS • (2) RAMBAUDI VERSAMILL 2000 CNC Milling
Machines, S/N 155716 & 150368, T-slotted Table 27.5” x 98.5”, Travels: X-78.6”, Y-27”; Z-43.6”; Delta 20 Controls, 20 HP Motor, Universal Head,
Rambaudi Versamill 2000 CNC Milling Machine
Kent KGS-200 Surface Grinder
Clausing Nardini Engine Lathe
Carlton 3A Radial Arm Drill
Carlton 4’ x 9” Radial Arm Drill
Kent KTM-3VK Vertical Milling Machine
Cincinnati Bickford 6E872 Radial Arm Drill
DoAll Horizontal Bandsaw
2 AVAILABLE
5VISIT WWW.MAYNARDS.COM FOR MORE INFORMATION
INSPECTION EQUIP • EDM • TOOL ROOM EQUIP • RADIAL ARM DRILLS • WELDERS
VERTICAL MACHINING CENTERS • (2)TREE 1060/24 Vertical Machining Centers, S/N
3330 & 3253, Table 23” x 50”, 24 Position ATC, Travels: X-40”, Y-24”, Z-25”; 40 Taper, Max RPM 8,000; PC-2100 Controls, Turbo Chip Conveyor, Pendant
• Large Assortment Angle Plates • 50 Taper & 40 Taper Tool Holders; Huot Tool Scoot Carts;
INSPECTION EQUIPMENT • G&L RS-150 Coordinate Measuring Machine, S/N
A-0695-0692; Range: X-47.2”, Y-78.7”, Z-31.5”; Sheffield Remote Control Pendant, Renishaw PH10MQ Motorized Probe, HASP Portlock S/N 09033
• G&L CORDAX H-30.15.9 Coordinate Measuring Machine, S/N H-0007, Range: X-, Y-, Z-; Renishaw PH10MQH Motorized Probe, HASP Portlock, PH10C Control
• STARRETT 650MM Height Gauge, S/N 81986.8, Certificate #89282-A, Metric Grade
• Steel Layout Tables - 120” x 180” T-slotted; 72” x 180” T-slotted
• Granite Plates
EDM • CHARMILLES ROBOFIL 290P Wire EDM, S/N 9-2359/
331290/1999, Max Workpiece Size 33.5” x 19.7” x 7.87”
TOOL ROOM EQUIPMENT •KENT KGS-515AHD Automatic Surface Grinder, S/N
95118103, Table 20” x 78”, Electro-Magnetic Chuck 20” x 59”, 5 HP
•THOMPSON Surface Grinder, Table 12” x 40”, Electromagnetic Chuck 10” x 24”
• KO LEE SE 618 Surface Grinder, S/N 28130, Electromagnetic Chuck 6” x 18”
• HARIG 618W Surface Grinder, S/N 4120W•KENT KGS-200 Surface Grinder, S/N 850751-8,
Walker Electromagnetic Chuck 6” x 18” •REID 618H Surface Grinder, S/N 17164, Chuck 6” x
18” • NARDINI/CLAUSING 1440E Engine Lathe, S/N 8098
415 530, Swing 14”, Center Distance 40”, Hole Through Spindle 1.75”, Cross Slide, Tail Stock, 8” -3 Jaw Chuck
•BRIDGEPORT Vertical Mill, S/N 225741, Table 9” x
42”, Power Feed Table, Quill Travel 5”, 2-Axis DRO• BRIDGEPORT Vertical Mill, S/N 95790, Table 9” x 48”,
Power Feed Table • KENT KTM-3VK Vertical Mill, S/N 890411-13 HP, Table
10” x 50”, Power Feed Table, Quill Travel 5”, Mitutoyo 2-Axis DRO
• LAGUN Vertical Mill, S/N SE 25517, Table 11” x 54”,Power Feed Table, Quill Travel 5”, Lagun 2-Axis DRO
•WILSON VSG 2015 Drill Press, Table 20” x 15”, Travel 7”• ENCO 125-1170 Drill Press, S/N 08114, RPM 215-3,250•GROB TYPE 4V-24 Vertical Band Saw, S/N 2640, Throat
24”, Table 24” x 28”, Welder •DOALL 3012-U Vertical Band Saw, S/N 147-681094,
Throat 31”, Table 24” x 24”, Welder • DOALL TF-14H Vertical Band Saw, S/N 863-77208• 20” Disc Sander; Delta 6” Bench Grinder; Enco Pedestal
Grinder; Collet Sets • PHOENIXMdl 1212 Vision Series Engraver
RADIAL ARM DRILLS •CINCINNATIBICKFORD 6E872 Radial Arm Drill, Column
Diameter 18”, Arm Length 6’, Half Moon Base - 19’ Diameter, RPM 100-1,500
• CARLTON 3A Radial Arm Drill, S/N 3A-3379, Column Diameter 15”, Arm Length 6’, L-Shaped Base, Box Table, RPM 15-1,500
• CSEPEL RFH75/2000 Radial Arm Drill, Column Diameter 17”, Arm Length 7’
•CARLTON 0A Radial Arm Drill, S/N 0A 27, Column Diameter 9”, Arm Length 4’
WELDERS •MILLER SYNCROWAVE 500 AC/DC Arc Welding Power
Source, S/N KB040066, Max Output 625 Amps•MILLER DELTAWELD 451 DC Welding Power Source,
Miller S-52A Wire Feeder
Thompson Surface Grinder
Modern Die Separator MB Portable Parts Washer
Tannewitz Woodworking Bandsaw Miller Syncrowave 500 AC/DC Welder
Cordax RS-150 DCC CMM
6 AUCTIONS • LIQUIDATIONS • APPRAISALS
ROLLING STOCK • MISCELLANIOUS
• (2) MILLER MillerMatic 250 CV/DC Welding Power Source;
• ESAB PCM-500i Welder
ROLLING STOCK • HYSTER J60A 6,000 Lb Fork Lift, S/N A168V01839E,
Electric, Max Lift 177”, Forks 42”•(2) HYSTER E50XM 5,000 Lb Fork Lifts, S/N
F108V14182V & F108V15366W, Electric, Ergonomic Controls, Side Shift, Max Lift 189”, Forks 48” & 42”
• AUTOMATIC LIFT TRUCK TLO-20D Die Cart, S/N C-71722, LP Gas, Cap. 40,000 Lb; Platform 84” x 67”
• ADVANCE 39223D Floor Scrubber, S/N 1126381• CROWN 15BT Electric Pallet Lift, S/N 36399,
Capacity 1,500 Lbs
• Forklift Extensions •EXIDE D3E-18-1200 Electric Battery Charger, S/N
VE42864 • COPPERLOY SS20-84-36PL8 Mobile Containeramp
Trailer, S/N 37655, Capacity 20,000 Lbs
MISCELLANEOUS •MIDBROOK CYCLONE Parts Washer, S/N 60028,
Capacity 18” Wide x 5’ Length, Stainless Housing, Mesh Type Belt
• GEHNRICH Drying Oven, S/N 8726 • (2)SIEMENSDEMATIC Belt Conveyors, Length 8’6”
x Width 12”; Length 20’ x Width 32” • VIKINGAtmosphere Controlled Paint Booth, Viking
Fan & Burner Controls • Large Assortment Parallels, Riser Blocks, Steel
View of chains
50,000# Capacity Coil Hook
Copperloy Trailer
Husky Snow Blower
View of Forktrucks
Phoenix 1212 Engraver
Automatic 40,000# Die truck
Plates, Cushion Pads • Large Assortment Rigging Chains - Two Leg & Four
Leg; Coil Lifting Straps; Swivel I-Bolts • 50,000# Coil C-Hook, Throat Depth 60” • BUSHMAN 5 Ton Spreader Bar &15 Ton Spreader Bar • Welding Positioner, Table 66” x 90”, 3 HP • (2)SKATBLASTShot Blast Cabinets • LAMINA Portable Drilling Unit, S/N P1671, with
Magnetic Base• MODERN HYDRAULICS Unit No 6371 Unified
Hydraulic Jacking System, Portable • ENERPAC4 Ton Hydraulic Arbor Press, .5 HP Motor
& Pump •FOX H-Frame Press, S/N 005139, Dayton 20 Ton
Bottle Jack • Die Clamps; Hydraulic Jacks; Steel Horse
Supports • SCHREIBER 300AC Chiller, S/N 24111 • PARKER 43 SERIES Hose Crimper, Dies • AEROQUIP Model A Crimp Machine, S/N 0287, Dies,
Hose Cutter •(5)LISTA 7-Drawer Cabinets • MOAKWoodworking Vertical Band Saw, S/N 7912,
Throat 36”, Table 31” x 37” • KINDTCOLLINS R Disc Sander, S/N5560, Diam. 24”• WILTON VSG 2025 Spindle Type Disc Sander, Table
20” x 25”
7VISIT WWW.MAYNARDS.COM FOR MORE INFORMATION
MISCELLANIOUS
• DELTA Table Saw, Overarm Guard • EVERETT 20-22 Chop Saw, S/N 7856-8 • LANDA PHW SERIES II Pressure Washer • (4) Triangle Engineering Heat Buster Fans, Mdl TPC4213, Diameter 42” •(7)JESSCO&ROURA Self Dumping Hoppers - 2.5 Yard - .33 Yard Capacity •HUSKEE/TECUMSEH Snow Blower, 5-Speed/2-Speed Reverse, 8 HP, Width 24” • Cantilever Style Bar/Stock Rack & Material • (6) SE-CUR-ALL & JUSTRITE Flammable Storage Cabinets - 60 Gallon & 55
Gallon Capacity •(55)ROPAK 40-48 Plastic Collapsible Containers • Steel Baskets • LSP Lubricant Spray Units • (20) Reelcraft Mdl 5650 OLP Hose Reels • Stresstel Ultrasonic Tester • NEDERMAN Portable Dust Collector • Shop Vacs; Signode Strappers • Lift Rite Pallet Jacks • Steel Tables; Sine Plates; Kurt 8” & 6” Vises; 10” 4-Jaw Chucks • Plunge Drills; Reamers; Taps; Drill Doctor Sharpener; Sterling Grinder; Go-No
Go Gauges; Milwaukee Chop Saw, Milwaukee Sawz-All; Milwaukee 1” Rotary Hammer; Milwaukee 4 3/4” Heavy Duty Deep Cut Saw; (2) Magnetic Base Drills
• Steel Cabinets; Dadco Cylinders; Clamps; Crane Scale; Kennedy Rolling Tool Chest; NAPA Battery Charger
• HP DESIGN JET 1055CM Color Plotter, S/N SG02S23116 • HP K Class 9000 Server
Quantity of Risers
View of Flammable CabinetsView of Gon Dumpers
View of Hand ToolsWorkstation View of Plastic and Metal Bins
Quantity of Tooling
HP PlotterView of Scrap Conveyor
For more information, please visit us online at www.maynards.com
8 AUCTIONS • LIQUIDATIONS • APPRAISALS
TERMS & CONDITIONS: PAymEnt: 25% NON-REFUNDABLE DEpOsit ON AwARD OF BiD, BALANcE withiN 48 hOURs. pAymENt is cAsh, cAshiER’s chEcK, cERtiFiED chEcK, wiRE tRANsFER, cOmpANy chEcK ONLy iF AccOmpANiED By A LEttER FROm yOUR BANK gUARANtEEiNg AmOUNt OF chEcK FOR DEpOsit AND/OR pAymENt iN FULL. NO pERsONAL chEcKs. FULL pAymENt mUst BE mADE BEFORE REmOvAL OF pURchAsE.
REMOVAL: LAst DAy OF REmOvAL is FRiDAy, jANUARy 8, 2010. AND As FURthER DEFiNED iN thE sALE cAtALOgUE. EvERythiNg is sOLD “As is, whERE is.” ALL sALEs FiNAL. cOst AND REspONsiBiLity FOR REmOvAL OF pURchAsE REmAiNs with thE pURchAsER. EvERy EFFORt wiLL BE mADE tO FAciLitAtE REmOvAL. whiLE qUANtitiEs AND DEscRiptiONs ARE BELiEvED tO BE AccURAtE, thE AUctiONEER, OwNERs OR cOUNsEL mAKE NO wARRANtiEs OR gUARANtEEs EithER ExpREssED OR impLiED As tO AUthENticity, gENUiNENEss OF, OR DEFEcts iN ANy LOt AND wiLL NOt BE hELD REspONsiBLE FOR ANy ADvERtisiNg DiscREpANciEs OR iNAccURAciEs. NO wARRANtiEs whAtsOEvER ARE mADE As tO cONDitiON, mERchANtiBiLity OR FitNEss FOR UsE OF ANy itEm. mAy wE sUggEst yOU tAKE FULL ADvANtAgE OF thE pREviEw AND iNspEctiON pERiOD. Sale Subject to additionS and deletionS and Prior SaleS. PleaSe check availability oF equiPMent.
BUYERS PREMIUMS: 13.5% ON-SITE, 16.5% ON-LINE
PUBLIC AUCTIONUpon instruction from the secured creditors
Online bidding available.Go to www.maynards.com
for more information.
Maynards Industries 250 H Street PMB 207 Blaine WA 98230
THURS, DEC. 17TH @ 10AM EST
Preview & Inspection: Wed, Dec. 16th from 9am - 4pm or by appointment.
240 Pennsylvania Ave.Salem, OHIO
AUCTIONEERS • LIQUIDATORS • APPRAISERS
21700 Northwestern HWY • Suite 1180Southfield, Michigan 48075Ph 248.569.9781 • Fx 248.569.9793 www.maynards.com
Industries (1991) Inc.
FPT LEM 937L CNC Horizontal Boring Mill Ravne SE4-2000-240-108 Straight Side Press
Pennsylvania Ave
Benton Rd
Wal
lace
P
kwy
62
62
45 14
45 2004
15-44 SPM2 AVAILABLE