UP TO 50% SAVINGS ON TRADITIONAL KICKFLAT - Redman Fisher · Redman fisher 4/8/2004 3:20 pm Page 1....
2
These new brackets are our revolutionary system for fixing kick flat & toe board to handrail standards. The basic principal involves gripping the kick plate with steel 'forked fingers' and fixing to the tube upright with a single grub screw. Major Benefits include • Retrofit to existing handrail • Eliminate Drawing Office Detailing • No drilling required • Easy Installation of Kick Flat on site • Simple, Flexible & Re-usable • Complete Component System To accompany our KickKlamp brackets we have connectors to help connect kick flat lengths KCB 1 – Internal Connector KCB 2 – External Connector KCB 3 – Straight Connector Please see overleaf for fixing instructions. Total Component System KCB1 KCB2 KCB3 Redman Fisher are proud to announce the launch of the new KICKKLAMP SYSTEM UP TO 50% SAVINGS ON TRADITIONAL KICKFLAT UP TO 50% SAVINGS ON TRADITIONAL KICKFLAT Kick Klamps are available to suit 25 NB shank (K25) or 32-40NB shanks (K40) * Patent Pending
Transcript of UP TO 50% SAVINGS ON TRADITIONAL KICKFLAT - Redman Fisher · Redman fisher 4/8/2004 3:20 pm Page 1....
These new brackets are our revolutionary system for fixing kick flat& toe board to handrail standards. The basic principal involvesgripping the kick plate with steel 'forked fingers' and fixing tothe tube upright with a single grub screw.
Major Benefits include
• Retrofit to existing handrail• Eliminate Drawing Office Detailing• No drilling required • Easy Installation of Kick Flat on site• Simple, Flexible & Re-usable• Complete Component System
To accompany our KickKlamp brackets we haveconnectors to help connect kick flat lengths
KCB 1 – Internal ConnectorKCB 2 – External ConnectorKCB 3 – Straight Connector
Please see overleaf for fixing instructions.
Total Component System
KCB1
KCB2
KCB3
Redman Fisher are proud to announce the launch of the new
KICKKLAMP SYSTEM
UP TO 50% SAVINGS ONTRADITIONAL KICKFLATUP TO 50% SAVINGS ONTRADITIONAL KICKFLAT
Kick Klamps areavailable to suit25 NB shank (K25) or32-40NB shanks (K40)
* Patent Pending
Redman fisher 4/8/2004 3:20 pm Page 1
SIDE PALM FIXING SYSTEM
• Plain kick flat cut to length on site.
• Alternate the KickKlamps, fixing them on the topand bottom of the kick flat bars.
• On short runs or for extra security, use twoKickKlamps per standard, one on the top and oneon the bottom of the kick flat.
• Use corner brackets and straight connectors as required.
• Plain kick flat cut to length on site.
• Fix KickKlamps at every standard on top of theKick flat and clamp down against the base plateof the standard.
• If kick flat is required at a higher level on handrailstandard, use side palm fixing system.
• Use corner brackets and straight connectors as required.
FLAT BASE FIXING SYSTEM
INFORMATION REQUESTI want to discuss morePlease send me a Company Catalogue Please send me an Instruction sheet and Ordering Form
Name:
Title:
Company Name:
Address:
Postcode:
Tel: Fax:
FAX BACK ON: - 01902 880446
The KickKlamps are available from stock to suit25NB to 40NB tubular handrails and 32-45 o/dsolid forged tubing.
For the full range of KickKlamps, Connectors andillustrated instructions on fixing, please contact thesales office. Alternatively if you fill in theinformation request below we will be happy to sendyou further information on these and our otherexisting products. If you would prefer to speak toone of our sale representatives, please do nothesitate to contact us on 01902 880880.
KICKKLAMPINSTRUCTION SHEET
KICKKLAMPINSTRUCTION SHEET
Birmingham New Road, Tipton, West Midlands DY4 [email protected]
Tel: 01902 880880Fax: 01902 880446www.redmanfisher.co.uk
Redman fisher 4/8/2004 3:20 pm Page 2
