UNRIVALLED CHOICE with UNRIVALLED PERFORMANCE
4
Independently tested and approved to BSEN858 parts 1 & 2, the Marsh ‘Marator’ and ‘Hydroil’ range features bypass, full retention and forecourt separators. High quality internal working components such as coalescing filters, automatic closure devices, weirs, high level alarms, oil skimmer plates and their configurations makes the Marsh range of oil separators, wash-down separators and silt traps the most modern and efficient units currently available to the market today. UNRIVALLED CHOICE with UNRIVALLED PERFORMANCE Visit www.marshindustries.co.uk/separators FULLY TESTED AND CERTIFIED OIL SEPARATORS, WASHDOWN SEPARATORS AND SILT TRAPS Marsh Hydroil and Marator TM TM
Transcript of UNRIVALLED CHOICE with UNRIVALLED PERFORMANCE
Independently tested and approved to BSEN858 parts 1 & 2, the Marsh ‘Marator’ and ‘Hydroil’ rangefeatures bypass, full retention and forecourt separators.
High quality internal working components such as coalescing filters, automatic closure devices, weirs, highlevel alarms, oil skimmer plates and their configurations makes the Marsh range of oil separators, wash-downseparators and silt traps the most modern and efficient units currently available to the market today.
UNRIVALLED CHOICEwithUNRIVALLED PERFORMANCE
Visit www.marshindustries.co.uk/separators
FULLY TESTED AND CERTIFIED OIL SEPARATORS, WASH-DOWN SEPARATORS AND SILT TRAPS
Marsh Hydroil and MaratorTM TM
60-200340-1137Marsh:MaratorHigh performance full retentionoil separator
For use on sites where the ‘industrystandard’ is just not good enough
Typical applicationsCar parksRoadwaysIndustrial estates
BS EN 858Discharge 50x betterthan current ENstandards
>0.1mg/ltr discharge(Industry standard 5mg/ltr)
30-2750170-15,582Marsh:HydroilFull retention oil separator
For use on sites where there is a‘high risk’ of oil contamination
Typical applications
Vehicle workshops
Refuel facilities
Fuel storage sites
BS EN 858
45-22551700-84,990Marsh:HydroilBypass oil separator
For use on sites where there is a‘low risk’ of oil contamination
Typical applications
Car parks
Roadways
Industrial estates
SuDS
BS EN 858
10,000(Class 1 and 2)
Marsh:HydroilForecourt separator
For use on sites where thereis a ‘significant risk’ of oilcontamination
Typical applications
Petrol stations
Refuel facilities
Fuel storage sites
BS EN 858
Wash-down separators
2800-20,000Silt traps
830-3400
Marsh:HydroilWash-down separators / silt traps
Wash-down separators are primarily used on
car wash bays, pressure wash facilities or other
cleaning facilities where the effluent must be
discharged to the foul water drainage system.
Silt traps are positioned ahead of an oil
separator where it gathers and stores silt and
sediment, preventing it from entering the oil
separator system.
AccreditationSeparator type Oil storage (L)Drainage area (m2)
UNRIVALLED CHOICE withUNRIVALLED PERFORMANCE
+44 (0)1933 654582 | [email protected] | marshindustries.co.uk
Visit www.marshindustries.co.uk/separators
Vehicle workshopsRefuel facilitiesFuel storage sites
FULLY TESTED AND CERTIFIED
WHAT OUR CUSTOMERS SAY
Marsh Industries is our first stop for our separatorenquiries. Their extensive product knowledge andexpertise not only includes for the specification anddesign of product, but also specific advice on separatorsrequiring deep inverts and heavy-duty shells, as well ason-site installation and after sales support.
They take particular care in matching the product withour customers’ needs, and in doing so offer a first classservice and a quality product.
“
We rely on Marsh as a knowledgeable, friendlysupplier of oil separators.
Their commercial guidance covers everythingfrom design to installation support if required.They offer quality products and an excellentservice, and they take care to match products tothe requirements of the client.
“
Their experienced and knowledgeablerepresentatives promptly and accurately interpretour requirements. We put full confidence in Marshfrom pricing to completion for all of our separatorrequirements.
“Speaking to experts in their field, such as those atMarsh Industries, provides us with confidence thatthe correctly sized tank is supplied and installed.Their systems are innovative and generally onquick lead times.
“
We would not hesitate to recommend MarshIndustries line of separators. Excellent service withknowledgeable technical assistance for the moretricky jobs. Each quote has an exceptional level ofdetail and information, including all necessaryspec sheets - invaluable for specialist merchantslike ourselves. Highly recommended.
“
Marsh is our first point of call for all enquiriesfor oil separators.
Their guidance covers everything fromdesign, commercial advice and on-siteinstallation support.
They take care to match the product with thecustomers’ needs, providing quality productsand an overall service that is second to none.
“
+44 (0)1933 654582 | [email protected] | marshindustries.co.uk
Visit www.marshindustries.co.uk/separators
Marsh Hydroil bypass separators are manufactured from virgin unfilled resin offering exceptionaldurability, impact resistance and are guaranteed to be watertight and of uniform thickness. Thesecombined properties ensure that the full range of separators stand up to the most rigorous conditionsduring their service life. Read on to find out what our customers say about our products...
Oil separators (EN 858-1)Oil separators must be tested to EN 858-1 achieving a final dischargeconcentration of <5mg/l. Furthermore, in line with the British Water How ToGuide: (Applying the CIRIA SuDS Manual Simple Index Approach toProprietary/Manufactured Stormwater Treatment Devices),“the free phasehydrocarbon mitigation indices for class 1 separators can be up to 0.975”.
Marsh successfully tested its Marsh:Marator and Marsh:Hydroil separators atPIA, Aachen, to EN858-1, with the Marator passing all sample tests at<0.1mg/litre.
Structural integrity testingStructural integrity tests, performed in accordance with EN ISO 179-1/1eA:2010-11, were undertaken to evaluate the strength of Marsh Industries’ GRPmaterials against similar GRP materials used by other manufacturers.
Three separate material samples were submitted for impact testing; MarshGRP material (virgin unfilled resin), a GRP material containing calcium fillersand a GRP material containing sand filler.
The tests involved 12 samples of each material at a size of 80x10x5mm. Thenominal pendulum energy was 15J at an impact velocity of 3.8m/s.
Results proved Marsh GRP material to be 40% stronger than the othermaterials tested.
Fire resistant testingFire resistance testing was performed to assess ignitability of productssubjected to direct impingement of flame. Marsh Industries’ GRP materialpassed all practical testing to achieve EN ISO 11925-2:2010 standard.
+44 (0)1933 654582 | [email protected] | marshindustries.co.uk
Visit www.marshindustries.co.uk/separators
MARSH HYDROIL AND MARATOR CASE STUDIES
Magna Park, LutterworthTo comply with strict regulations for oil and hydrocarbonseparation on discharge, the requirement for Marsh fullretention oil separators was identified alongside twoadditional bypass separators and a forecourt separator toprotect against major fuel spillages.
Titanic Docks, BelfastThree Marsh full retention oil seperators were specifiedand installed during summer 2020 to meet strictenvironmental regulations on this site for a global onlineretailer, located within the Titanic Quarter of Belfast.
Symmetry Park, BicesterAs part of the expansion of this industrial site, including anew warehouse development for a major parceldistribution facility, four Marsh full retention oil separatorswere specified alongside a forecourt oil separator toprotect against major fuel spillages and to comply withstrict regulations for oil and hydrocarbon separation ondischarge.
Recovery site, near South Downs National ParkThe above Marator65 was specified and installed at anHGV recovery site located close to the South DownsNational Park. Owing to the sensitive environmentalissues surrounding this site and with effluent beingdischarged into a river, the Marsh Marator was specifieddue to its exceptional discharge quality of 0.1mg/l(industry standard: 5mg/l).
A great company that excels in communication,availability, sales and technical awareness. Wehighly recommend.
“
For more detaled technical information andspecifications, contact Shelagh Crabb on: 07469 204971 | [email protected]
