UNIVERSITY OF ENGINEERING & TECHNOLOGY, LAHORE TERMS ... · c. Mechanics of Machines Lab. Amount of...

UNIVERSITY OF ENGINEERING & TECHNOLOGY, LAHORE

TERMS & CONDITIONS / INSTRUCTIONS FOR BIDDERS

OF

LAB EQUIPMENT CHEMISTRY LAB

NAROWAL CAMPUS (NO 01)

1. Single stage/two envelope bidding procedure shall be applied in response. The

envelops shall be marked as “TECHNICAL PROPOSAL” and “FINANCIAL

PROPSAL”. The financial proposal of bids found technically non-responsive shall be

returned unopened to the respective bidders. Technically responsive bidders shall be

informed and their financial bids shall be opened in the next Central Procurement Cell

(CPC) meeting after informing the technically responsive bidders.

2. Responding organizations shall deliver sealed proposal of the “TECHNICAL & FINANCIAL PROPOSALS” before or on 15th June, 2020 at 9:30 a.m.

3. The Proposals will not be accepted after the due date &, time proposal shall be

delivered at the address given below before time. The TECHNICAL PROPOSALS

shall be opened on the same day at 10:00 a.m. in the presence of bidders or the

representatives of the responding organizations.

4. Bidders are advised not to quote different options (only one option is to be quoted). Received bid with different options shall not be entertained.

5. Price should be mentioned on FOR basis.

6. The prices, including all taxes, should be quoted item-wise in Pakistani Rupees so as

to reach the premises of the University of Engineering &Technology Lahore Narowal

Campus.

7. Offers should be valid for 120 working days from the date of opening of the Tender.

8. a. Delivery period should not exceed 8 weeks from the date of placement of order.

Earlier delivery will also be acceptable.

b. after 8 weeks successful bidder will be fined 0.5% per week of the total payable

which will be deducted from his payment. The relaxation in the delivery time will not

be provided more than 4 weeks after the expiry of delivery time of 8 weeks.

9. Bidders must submit their tender duly signed, clearly indicating the offered

specifications of each item, specified in the Tender Document.

10. Offers must be supported with comprehensive sectioned literary of the materials /

good offered/detailing all the Guaranties.

11. The University reserves the right, at the time of placing the order, to increase or

decrease the quantity of items.

12. (a) Bids must be accompanied by 2% of total estimated cost as Earnest Money in the

shape of CDR in the name of Treasurer, University of Engineering and Technology,

Lahore without which bids will not be entertained. Bank Guarantee is not acceptable.

Estimated cost and amount of CDR is given against each item..

(b) the successful bidder will arrange two stamp paper @0.25% on total value of

Issuance of Purchase Order.

13. A. If the successful bidder fails to supply the equipment within stipulated period

mentioned in para 8, their Earnest Money shall be forfeited.

B. If the bidder failed to supply the equipment, then the University has the right to

purchase the equipment from other suppliers and any difference in payments would be liability of the successful bidder failed to supply alone with the penalties mentioned in

para 13 Clause A.

14. The equipment must be in accordance with the offered specifications.

15. Bidders must attach attested photocopy of their N.T.N. and G.S.T. Number,

Professional Tax Certificate.

16. The successful bidder(s) shall get the equipment inspected at their premises workshop

before its dispatch to UET Lahore Narowal Campus.

17. Part / advance payment is not allowed.

18. 10% security of total value of Purchase order/bill shall be deducted at the time of bill

process. The deducted amount as security will be returned after successful completion

of Defect Liability / Warranty Period, after repairing the defects in the equipment /

replacement found during the warranty period.

19. Deduction of Income Tax and other taxes of any kind will be deducted at the source

according to Governments prevailing rules.

20. Sale price of the tender document is Rs.1000/- (Non-Refundable) .The details

specifications of the required equipment are given in the subsequent pages.

21. After Sale service and supply of spare parts must be guaranteed for a period of one

year.

22. The original Request for Proposal documents duly signed and officially sealed by the

bidder must be submitted in whole with the proposals. Any conditional, ambiguous,

incomplete, supplementary or revised offer after the opening of tender shall not be

entertained.

23. Any overwriting/crossing, etc. appearing in the offer may be properly signed by the

person signing the tender. All pages of the tender must be properly signed & stamped.

Offer with any overwriting/use of Blanco shall not be accepted in any circumstances.

24. The Departmental/Sub Campus Inspection Committee, will get the equipment

inspected at UET Lahore Narowal Campus and will have the right to reject the

equipment if not found according to the stated specifications.

25. In case any supply / material is found not in conformity with the specifications

provided in the tender, either on account of inferior quality, defective workmanship,

faulty design, faulty packing or is short supplied, or wrongly supplied, the supplier

shall replace the same free of charges.

26. The bidders are required to submit the company profile including Technical,

engineering, managerial capabilities after sale service and past experience /

performance along with their technical bid and also list of reference installation in

Pakistan for similar equipment.

27. Procurement shall be governed by the PPRA Punjab Rules-2014.

Dr.Habib Hussain Bubuk

Head

Basic Sciences Department

UET Lahore. Narowal Campus

0321-4618681

Specifications Chemistry Lab Narowal Campus. Sr.no ITEM Specification Qty

1

Furier

Transform

Infrared

Spectrometer

Interferometer: 25 mm, permanently aligned, Michelson, 45°,

mechanical flexture

Enclosure: Sealed and desiccated

Beam splitter; Efficient beam splitter,

Moisture: Moisture free settings

Spectral wavelength ranges: with ZnSe 7,800 to 500 cm ¹־

Qualitative & Quantitative:

Ideal for both qualitative and quantitative analysis — instantly

select from one of three factory-calibrated, fixed pathlengths

between 30 and 1000 microns

Wave number accuracy: 0.05 cm-1 Measured with a NIST

1921 traceable standard Wave number accuracy: within ± 0.01 cm ¹־

Wave number reproducibility: 0.005 cm-1 Measured with

a NIST 1921 traceable standard

Resolution: ≤ 0.5 cm¹־

Signal to noise ratio: (≤ 5 cm 1 ≥ ,¹־ min scan) ≥ 30,000 : 1

Light source: Stable light source cover above wavelength

range,

Detector: Fast and temperature control cover wide range of

analysis

Software : PC software, Automated IQ/OQ

Ideal for both qualitative and quantitative analysis , Complete collection of spectral processing and analysis tools .

Library: Must have In- Built library of at least 9,000 spectras

or better

Computer: Compatible Branded Core i-5 Computer system

along with Printer & LED Optical system: Single beam/Double beam

Temperature controlled and moisture/humidity resistant KBr

optics

Auto subtraction of CO2 and H2O absorptions

Source: Internal high power IR source

Interferometer : Rock solid and permanent aligned with high

stability

01

Estimated Cost

Rs. 3.66 Million

Amount of

CDR.RS.73 200/-

2.

UV/Visible

spectrophoto

meter

Instrument hardware Source

Unique full-spectrum Xenon flash lamp (80 Hz) with typical

lifetime of 10 years (guaranteed 3 years)

Monochromatic : Czerny-Turner Grating: Holographic, 27.5 x 35 mm, 1200 lines/mm, blaze

angle 8.6° at 240 nm

Beam splitting system: Beam splitter

Detectors: 2 silicon diode detectors for simultaneous sample and reference measurements

UV-Vis limiting resolution (nm): ≤ 1.5 nm

Stray light (%T):

At 198 nm (12 g/L KCl, TGA & BP/EP method) ≤ 1%

At 220 nm (10 g/L NaI ASTM method) ≤ 0.05%

At 370 nm (50 mg/L NaNO2) ≤ 0.05%

Wavelength range (nm): 190–1100 nm

Wavelength accuracy (nm): ± 0.5 at 541.94 nm

Wavelength reproducibility (nm): ± 0.1 nm

Photometric accuracy (Abs) Using NIST 930D fi lters at 1 Abs ± 0.005 Abs

At 0.2, 0.5 & 0.75 Abs (14.2% w/v KNO3, TGA method) ±

0.01 Abs

0.292 to 0.865 Abs (60.06 mg/L K2Cr2O7, BP method) ± 0.01 Abs

01

Estimated Cost

Rs.1.617 Million

Amount of

CDR.RS. 32350/-

Photometric range (Abs) ± 3.3 Abs Photometric display

± 9.9999 Abs, ± 200.00 %T

Photometric reproducibility (Abs) Using NIST 930D fi lters, at 465 nm, 2 s SAT

Maximum deviation at 1 Abs < 0.004 Abs Standard deviation

for 10 measurements < 0.00050 Abs

Using NIST 930D fi lters, at 546.1 nm, 2 s SAT Maximum deviation at 0.5 Abs < 0.003 Abs

Standard deviation for 10 measurements < 0.0030 Abs

Photometric stability (Abs/hour) 500 nm, 10 s SAT < 0.0004

Abs Photometric noise (Abs, RMS)

500 nm, 1 s SAT At 0 Abs < 0.0001 Abs At 1 Abs < 0.0005 Abs At 2 Abs < 0.005 Abs

260 nm, 1 s SAT At 0 Abs < 0.00015 Abs

Baseline flatness (Abs) 200 to 850 nm, smooth 21 fi lter applied, baseline corrected ±

0.001 Abs

Compartment size (width x depth x height)

130 mm x 523 mm x 123 mm

Note that sample compartment can be left open during

measurement due to room light immunity of Cary 60

Sample compartment access Top and front:

Instrument dimensions (width x depth x height)

Packed 595 x 710 x 350 mm (24 x 28 x 14 in)

Unpacked 477 x 567 x 196 mm (19 x 23 x 8 in) The Cary 60 has been designed to withstand monitor up to 10 kg.

Operational

Spectral bandwidth (nm): Fixed at 1.5 nm

Signal averaging (seconds): 0.0125–999 s

Maximum scan rate (nm/min): 24000 nm/min

Slew rate (nm/min): 24000 nm/min

Data interval (nm): 0.15–5.0 nm Repetitive scanning

4800 data points per minute, maximum number of cycles: 999,

maximum cycle time (min): 9999

Solid Sample Holder for solid samples

Matched pair Standard Cuvettes Q.ty: 01

Matched pair Quads Cuvettes Q.ty: o1

Computer System Core i-5, 7-Generation, RAM 8-GB, Hard 1- TB, Monitor 21”

Window 7 Professional 64 bit

Laser Jet Printer HP-402 N

5. ATOMIC ABSORPTION SPECTROPHOTOMETER 01 ESTIMATE D

COST RS. 7.86

Million Amount

OF CDR

RS.157200/-

Measurement

Mode

Fully automated double beam spectrometer for Sequential fast

multi-element Flame Atomic Absorption and Emission

determinations.

Should be upgradable to Graphite Furnace

Manufacturer must be certified to ISO 9001 standards. Please

provide certificate of registration for the manufacturer

Monochroma

tor

Automated self-calibrating 250 mm or better focal length

Czerny-Turner monochromator with microstepping driver for

enhanced resolution. Software-controlled wavelength selection and peaking.

Wavelength slew rate 2000 nm/min

photomultiplier tube detector (type R446) for best signal-to- noise performance. Automated slit selection. Settings: 0.2, 0.5 and 1.0 nm.

Wavelength Range

Wavelength Range: 185–900 nm Wavelength repeatability: ±0.04 nm

Optics

Narrow beam optics match flame and furnace profiles. Optics

are mounted on a reinforced flat plate with a fitted cover for

protection from dust and vapor. Mirror surfaces are quartz

overcoated for enhanced protection. singlebeamsplitter plus a

Rotating Beam Combiner, which alternately passes the sample

or reference beam into the monochromator for maximum light transmission.

Lamps

Support for four lamps

Lamps mounted in fixed positions. Fast lamp selection using

mirror with automated selection. Compatible with coded,

uncoded or high intensity UltrAA lamps.

Lamps secured by the base without restraining clips or power

cables. Lamps automatically switched off at the end of analysis. Automated pre-warming of next lamp in sequence.

Back Ground

Correction

High intensity deuterium background corrector covering

wavelength range 185–425 nm.

Corrects up to 2.5 background absorbance. 2 ms response.

Electronic modulation with automatic gain attenuation for

improved beam balance.

Deuterium lamp easily aligned and replaced by the user.

Optimized electronic control ensures long lamp lifetime.

Diffraction Grating

Holographic diffraction grating with 1200 lines/mm blazed at

240 nm. Dispersion 3.1–2.3 nm/mm.

Flame

Atomization

System

All gas hoses and connections must be made internally, to

minimize exposure of hoses to physical damage, corrosion, heat

and UV radiation

Must be possible to remove and disassemble in seconds,

without special tools. Specify design elements which contribute

to rapid spraychamber clean-out

Liquid trap must be fixed to the spraychamber and the liquid

level interlock must be an integral part of the liquid trap

Impact bead required with mechanism to allow external

adjustment (without tools)

Impact bead must be available for use with both air-acetylene and nitrous oxide-acetylene flames

Must be possible to install mixing paddles for improved mixing

inside the spraychamber and still retain use of the impact bead

for improved performance

A pressure relief bung is required to relieve pressure in case of

flashback. The ejection of the burner and the use of restraining

cables or keys on the burner is not acceptable

Spraychamber must be capable of handling acids, alkalis and

organic solvents. Specify materials of construction. Aluminium

or polypropylene construction is not acceptable for this

application.

Must be fitted with an adjustable nebulizer with inert capillary

and venturi. Specify materials of construction

Gas Flow

Automatic gas control

Separate internal and external gas flows. Internal flow is

software-controlled over range 0–0.3 L/min. Fixed external gas

flow of 0.5 L/min. with computer-controlled boost flow of 3.0

L/min during atomization. Two stage external flows reduce gas consumption and improve tube lifetimes

Flame Performance Sensitivity

A minimum absorbance of 0.9 is required from a 5 mg/L copper standard using an air-acetylene flame and aspirating at min. flow of 7.2 mL/min.

Flame Performance

The percent relative standard deviation (%RSD) from ten 5 second integrations must be equal to or better than 0.5% for the

Precision same 5 mg/L copper solution aspirating at 5.0mL/min

Hydride

Generation

Continuous flow vapor generation required for the

determination of Hg, As, Se, Sb, Te, Bi and Sn at ug/L

concentrations.

Construction must allow rapid changeover between elements

with conflicting chemistry (e.g.: As and Hg). Changeover must

be modular.

Performance of the system must allow 3 replicate readings to

be achieved from 1 sample using < 8 mLs of sample with

analysis time of 1 min. or better. Precision from the 3 replicate readings must be 1 – 2 % RSD

Lamps with Standards

(1) Calcium, (2)Magnesium, (3)Iron, (4)Zinc, (5)Manganese, (6)Cobalt, (7)Copper, (8)Mercury, (9)Sodium, (10)Potassium

Accessories Fume Extraction System, Air Compressor Oil-Free, Acetylene

Gas with Regulator, Nitrous Oxide Gas with Regulator, Organ Gas with Regulator.

Measuring method: Optical rotation measurement

01

Estimated Cost

Rs.1.69 Million. Amount of CDR.RS. 33800/-

Temperature sensor: Build-in temperature sensor (Pt 100) for sample cells and quartz control plates with wireless data transfer into the instrument software Automatic identification of sample cell and quartz control plate to avoid incorrect sample cell selection and ensure traceable and comfortable instrument handling. Long lifetime LED light source (average lifetime 100.000 hours) Measuring range: ± 89.9 ° Accuracy Optical Rotation: ± 0.01° Temperature range of Peltier temperature control: + 20° and 25°C or temperature control disabled Wavelength: 589 nm

8. Digital polarimeter

Temperature accuracy: ± 0.2 °C

Repeatability in Optical Rotation : ± 0.01° Response time: 12 seconds

Adjustment: Quartz control plate with manufacturer’s certificate. Also available: PTB certificate on request Methods: Optical rotation, concentration, specific rotation Data memory: Internal data memory Supported input/output Devices: ▪ Keyboard, mouse, bar code reader, memory stick ▪ Pos. printer (RS232), office printer connected via USB or Ethernet (Canon Bubble Jet, Epson Esc/P2, Epson Stylus, HP and PCL compatible) Display: Graphical, brightly colored 5.7 inches TFT touch screen (640 x 480 px) User elements: Touch screen Housing: Polystyrene / butadiene Wetted parts: Borosilicate glass, stainless steel Measuring range:1.30 – 1.66 nD

Estimated Cost

Rs.1.79 Million Amount of CDR.RS.35

800/-

Accuracy refractive index: 0.0001 nD *)

Temperature control :Automatic temperature correction

Refractive Index:

Measuring range: 1.3330-1.6600nD

9

Digital Refractometer

Resolution: ±0.0001 nD.

Accuracy Refractive Index: ±0.0001 nD at the push button Brix:

01

Range: 0 % to 100 %

Resolution: 0.01 %

Accuracy): 0.05 %

Temperature probe accuracy: ±0.05 °C

Additional Information:

Optical Wavelength: 589.3nm

Measuring Light Source: LED

Sensor: Linear Hi-Res CCD

Prism: Optical glass

Stage: Sapphire, FFKM, High polish stainless steel

Temperature compensation: +5 to +35oC (Automatic

temperature correction)

Measuring time: 1.0 seconds per sample

Minimum Sample quantity: >0.1mL

Zero calibration liquid: Distilled water

Display: LCD

Additional methods :more than 100 methods available on

request (e.g. syrup, honey, alcohol, urine

Data interface :RS-232, 2 USB, 1 USB serial, ethernet printer,

ethernet LIMS User interface :5.8 inch touchscreen.

Conductance: 0.1 µS - 500 mS Conductivity measuring accuracy: ±0.5% at 0.1 µS - 16 µS

01 Estimated Cost Rs. 1.275 Million

Amount of CDR Rs. 25500/-

10 Conductometer

Resolution: 0.1oC Display resolution: 320 x 240 pixels (RGB)

Temperature Measuring range: –150°C - +250°C Operation: 0°C - +40°C (at a max. of 85% humidity)

Capacity: 220 g 02 Estimated Cost

Rs. Million 0.240 Amount of CDR Rs. 4800/-

Readability: 0.001 g or 1 mg

Tare range: 220g

Response time: 2 second or less

Repeatability: = or ± 1 mg

Electronic Linearity: = or ± 2 mg

11 Balance (1mg)

Calibration: Internal Pan dia: ~ 115 mm

Balance housing: Yes

Overload protection: Yes

Leveling feet: Yes

Level indicator: Yes

Port for computer and printer: Preferred

12 Chemicals and Solvents Qty

Estimated Cost

for Chemical

Solvents

Rs.0.808 Million

Amount of CDR

Rs.16160/-

1 1,10-Phenanthroline 50g 2 1,4-Narthoquinone 50g 3 1,5-Diphenyl Carbazide 100g 4 1-Butanol 500g 5 1-Naphthol 500g 6 2,4-Dinitrophenyl Hydrazine 300g 7 2-Naphthol 500g 8 Acetamide 250g 9 Acetanilide 500g 10 Acetic Acid 4L 11 Acetic Anhydride 2L 12 Acetone 2.5L 13 Acetonitrile 2.5L 14 Acetophenone 250g

15 Acetyl Chloride 250g

16 Adipic Acid 300g 17 Alizarin 25g 18 Aluminium Chloride 250g 19 Aluminium foil 2

sheets

20 Aluminium Hydroxide 250g 21 Aluminium Oxide 250g 22 Aluminium Sulphate 250g 23 Aluminone 100g 24 Ammonium Acetate 250g 25 Ammonium Carbonate 250g 26 Ammonium Chloride 250g 27 Ammonium Dihydrogen Phosphate 250g 28 Ammonium Hydrogen Carbonate 250g 29 Ammonium Hydroxide 2L 30 Ammonium Iron II sulphate 500g 31 Ammonium Molybdate 300g 32 Ammonium Oxalate 100g 33 Ammonium Sulphate 250g 34 Ammonium Sulphide Yellow 250g 35 Aniline 250g 36 Anthracene 100g 37 Anthraquinone 500g

38 Antimony Sulphate 250g

39 Antimony Sulphide 500g

40 Antimony Trichloride 500g

41 Arsenic Oxide 250g

42 Ascorbic Acid 250g

43 Barium Chloride 250g

44 Barium Nitrate 800g

45 Barium sulphate 250 g

46 Benzamide 250g

47 Benzene 1L

48 Benzidine 300g

49 Benzil 250g

50 Benzoic acid 250g

51 Benzophenone 500g

52 Benzoquinone 100g

53 Biphenyl 800g

54 Bismuth Chloride 500g

55 Bismuth Nitrate 800g

56 Boric Acid 800g

57 Bromophenol 500g

58 Cadmium Carbonate 500g

59 Cadmium Chloride 500g

60 Cadmium Sulphate 500g

61 Calcium Acetate 250g

62 Calcium Carbonate 250g

63 Calcium Chloride 250g

64 Calcium Hydroxide 100g

65 Calcium Hypochlorite 250g

66 Calcium Oxalate 500g

67 Calcium Sulphate 250g

68 Camphor 200g

69 Carbon Disulphide 1 L

70 Carbon Tetrachloride 1 L

71 Catechol 100g

72 Charcoal Activated 500g

73 Chloral Hydrate 500g

74 Chloroform 2.5L

75 Cholesterol 100g

76 Chromatography paper 6

sheets

77 Chromium Acetate 500g

78 Chromium Carbonate 500g

79 Chromium chloride 250g

80 Chromium Oxide 250g

81 Chromium Sulphate 400g

82 Cinnamic Acid 100g

83 Cinnamic acid 250g

84 Citric Acid 500g

85 Cobalt Carbonate 500g

86 Cobalt chloride 250g

87 Cobalt Nitrate 500g

88 Cobalt Oxalate 250g

89 Cobalt Sulphate 500g

90 Copper Acetate 500g

91 Copper Chloride 500g

92 Copper Nitrate 500g

93 Copper Sulphate 250g

94 Creatinine 25g

95 Cyclohexylamine 500g

96 Dextrose (Powder form) 500g

97 Diammonium Oxalate 500g

98 Dichloromethane 2.5L

99 Diethyl Ether 2.5L

100 DimethylGlyoxime 500g

101 Diphenylamine 250g

102 Disodium Oxalate 250g

103 Dithizone 100g

104 DMSO 2.5L

105 D-Sorbitol 250g

106 EDTA 1500g

107 Eosine indicator 25 g

108 Eriochrome Black T 25g

109 Ethanol 5L

110 Ethyl acetate 2.5L

111 Ethylene Glycol 2.5L

112 Ferric Alum 500g

113 Ferric chloride 250g

114 Ferric Nitrate 250g

115 Ferrous Sulphate 500g

116 Ferrous Sulphide 500g

117 Filter Paper Sheets 6

118 Florescein 25g

119 Formaldehyde 500ml

120 Fructose 1000g

121 Fuchsin Black 50g

122 Glucose 1000g

123 Graphite Powder 250g

124 Hydrochloric Acid 2L

125 Hydrofluoric acid 2L

126 Hydrogen Peroxide 0.5L

127 Hydroquinone 500g

128 Hydroxylamine 500g

129 Iodine 200g

130 Iodoform 500g

131 Iron II Chloride 800g

132 Iron II Chloride Hydrate 500g

133 Isopropyl Alcohol 2L

134 Janus Green 250g

135 Lactose 2000g

136 Lead Acetate 500g

137 Lead Carbonate 500g

138 Lead Chloride 100g

139 Lead Nitrate 250g

140 Litmus 50g

141 Magnesium Carbonate 100g

142 Magnesium Chloride 250g

143 Magnesium Metal Powder 500g

144 Magnesium Sulphate 250g

145 Magneson 25g

146 Malonic Acid 500g

147 Maltose 300g

148 Manganese Chloride 250g

149 Manganese Dioxide 250g

150 Manganese Nitrate 250g

151 Manganese Sulphate 250g

152 Mannitol 250g

153 Mercuric Chloride 200g

154 Mercurous Chloride 200g

155 Methanol 5L

156 Methyl Acetate 2L

157 Methyl Orange 20g

158 Methylacetic acid 2L

159 Methylene Blue 50g

160 Mohr’s Salt 1000g

161 Murexide Metal 25g

162 Naphthalene 250g

163 n-Butanol 2.5L

164 n-Hexane 5L

165 Nickel Chloride 250g

166 Nickel Nitrate 250g

167 Nickel Sulphate 200g

168 Nitric Acid 2.5L

169 Nitrobenzol 2.5L

170 O-cresol 250g

171 O-Phosphoric Acid 2.5L

172 O-Pthalic Anhydride 500g

173 Orange G 250g

174 Oxalic Acid 500g

175 Petroleum ether 5L

176 Petroleum Spirit 5L

177 pH paper 6

178 Phenanthrene 250g

179 Phenol 250g

180 Phenolphthalein Powder 100g

181 Phenyl Acetic Acid 250g

182 Phenyl Hydrazine Hydrochloride 100g

183 Phloroglucinol 100g

184 Phosphomolybdic Acid 250g

185 Phthalic acid 250g

186 Picric Acid 500g

187 Potassium Acetate 250g

188 Potassium Antimonate 250g

189 Potassium Bromide 250g

190 Potassium Chloride 250g

191 Potassium Dichromate 500g

192 Potassium Dihydrogen Phosphate 250g

193 Potassium Ferrocyanide 250g

194 Potassium Hexacyano Ferrate 100g

195 Potassium Hydroxide 500g

196 Potassium Iodide 200g

197 Potassium Nitrate 500g

198 Potassium Oxalate 500g

199 Potassium Perchlorate 250g

200 Potassium Permanganate 1000g

201 Potassium Sodium Tartarate 250g

202 Potassium Thiocyanate 400g

203 p-Toluidine 500g

204 Pyridine 1L

205 Pyrogallol 100g

206 Resorcinol 100g

208 Rubenic Acid 05g

209 Safranin O 100g

210 Salicylic Acid 250g

211 Silica Gel 1000g

212 Silver Chloride 25g

213 Silver Nitrate 100g

214 Silver Sulphate 250g

215 Sodium Acetate Trihydrate 250g

216 Sodium Arsenate 100g

217 Sodium Bicarbonate 2500g

218 Sodium Bisulphite 250g

219 Sodium Borohydride 250g

220 Sodium Bromide 500g

221 Sodium Carbonate 2000g

222 Sodium Chloride 2000g

223 Sodium Cobaltonitrite 100g

224 Sodium Dichromate 250g

225 Sodium Dihydrogen Phosphate 100g

226 Sodium Hydroxide 2000g

227 Sodium Iodide 500g

228 Sodium Metal 100g

229 Sodium Nitrate 500g

230 Sodium Nitroprusside 100g

231 Sodium Phosphate 500g

232 Sodium Sulphate 500g

233 Sodium Sulphide 200g

234 Sodium Thiosulphate 500g

235 Stannous Chloride 500g

236 Starch Soluble 500g

237 Stearic Acid 500g

238 Strontium Carbonate 250g

239 Strontium Nitrate 500g

240 Succinic Acid 500g

241 Sulphur 250g

242 Sulphuric Acid 2000g

243 Tartaric Acid 250g

244 TBE buffer (Tris-Borate) 250g

245 Tertiary Butyl Alcohol 1L

246 Tetrahydrofuran (THF) 500ml

247 Thiourea 500g

248 Tin Chloride 250g

249 Toluene 2L

250 Tungstic Acid 100g

251 Urea 500g

252 Uric Acid 25g

253 Vanadium Pentaoxide 100g

254 Xylene 1.5L

255 Xylene cyanol 2L

256 Zinc Acetate 1000g

257 Zinc Carbonate 1000g

258 Zinc Chloride 1000g

259 Zinc Dust 250g

260 Zinc Nitrate 250g

261 Zinc Oxide 500g

262 Zinc Phosphate 500g

263 Zinc Sulphate 500g

15

Rotarory

Viscometer

Apparatus

Measure viscosities of opaque, settling fluids

Speed [rpm]: 0.1 to 200 (25 increments: 19 preset plus 6

editable)

Viscosity range: 1-6000000 mPa.s Max.

spring torque [mNm]: 0.0673 Accuracy:

±1.0 % full scale range Repeatability: ±0.2

% full scale range Temperature : ambient

to 1400oC Standard Accessories:

•1 pc. Stand Viscometer

•1 pc. Spindle set

•1 pc. Spindle Guard including fixing screw

•1 pc. Instruction Manual and Safety Information

•1 pc. Standard Operating Procedure

01

Estimated Cost

Rs.1.275 Million

Amount of CDR

RS. 25500/-

19 Glassware QTY

Estimated Cost

for Glass Ware

Rs.0.375 Million

Amount of CDR

RS. 7500/-

1 Aspirator bottle 3 2 Beaker 100 ml (pyrex) 12 3 Beaker 250 ml (pyrex) 6 4 Beaker 50 ml (pyrex) 12 5 Beaker 500 ml (pyrex) 6 6 Beckmann thermometer 1 7 Buchner funnel (90mm) 3 8 Burette 50 ml Rotaflow 12

9 Burette Stand 12 10 Burner 12 11 Burner tube 20

meter 12 Capillary tubes 1 pkt 13 Ceramic dish 6 14 Ceramic Plates 6x6 6 15 China dish 12 16 Chromatographic Column 3 17 Chromatography jar 12 18 Condenser Reflux 3 19 Conical flask 100 ml (pyrex) 6 20 Conical flask 250 ml (pyrex) 12 21 Cork borer 3 22 Cotton wool 2 pkt 23 Crucible 6 24 Crucible tongs 12 25 Digital thermometer 2 26 Dreschel bottle 3 27 Glass apparatus for LN2 test 1 28 Glass funnel 12 29 Glass jar 6 30 Glass plate 6 31 Glass rod 12 32 Iodine flask 250 ml 6 33 Magnetic bar 6 34 Measuring cylinder (10 ml) 6 35 Measuring cylinder (100 ml) 6 36 Measuring cylinder (250 ml) 6 37 Measuring cylinder (50 ml) 6 38 Measuring flask (500 ml) 6 39 Measuring flask 100 ml 6 40 Measuring flask 250 ml 6 41 Measuring flask 50 ml 6 42 Measuring flask 500 ml 6 43 Pestle mortar 1 44 Petri dish (Glass) 12 45 Pinch Cork with Rubber Tubing 6 46 Pipette 1 ml 6 47 Pipette 10 ml 12 48 Pipette 5 ml 6 49 Pipette Sucker 6 50 Quick fit flask (round bottom) Pyrex 250 ml 6 51 Quick fit flask (round bottom) Pyrex 500 ml 6 52 Quick fit flask (round bottom, Three neck) Pyrex 100 ml 3 53 Quick fit flask (round bottom, Two neck) Pyrex 250 ml 6 54 Quick fit flask (round bottom, Two neck) Pyrex 500 ml 6 55 Reagent bottles 250 ml 36 56 Round bottom flask stand 12 57 Screw type pinch cork 6 58 Separating funnel 100 ml 6 59 Separating funnel 250 ml 3 60 Spatula spoon glass (6 inch) 12 61 Spatula spoon stainless steel (6 inch) 12 62 Specific gravity bottle 25ml 6 63 Spirit lamp glass 3

64 Stalagmometer (pyrex) 6

65 Stopwatch digital 3

66 Test tube holders 24

67 Test Tube Stand 12

68 Test tubes (pyrex) 10 dzn

69 Thermometer 110- 3600 C 2

70 TLC aluminium plates 3 pkt

71 TLC glass plates 3 pkt

72 Tripod stand 12

73 Vacuum Dessicator Glass 2

74 Vacuum flask (250 ml) 6

75 Viscometer (pyrex) 6

76 Watch glass 12

77 Water bath (Copper) 12

78 Whattman Filter Paper 1 (UK) 2 pkt

79 Whattman Filter Paper 42 (UK) 2 pkt

80 Wick and lid 3

81 Hot plate MSH-20A 2

All Quartz double distillation unit 01 Estimated Cost Rs. Million 0.840 Amount of CDR Rs. 16800/-

Model – Vertical

Distilled Water Output Capacity – 2.5 Litres / Hours

Double Working Temperature : -10°C to 100°C

20 Distillation Apparatus

Bath Volume : Minimum 5 litre capacity Distillate water quality specifications

o It should be free from pyrogen and organic matter

o Conductivity < 1x10-6 S/cm

o Total Solids < 0.1mg/lit

Computers

• Processor Intel Core i7-9700 3.0GHz up to 4.7 GHz

Processor • RAM: 16GB, extendable up to 32 GB DDR4 2666 MHz • HDD: 1TB Serial ATA (7200 RPM) • Wireless LAN: 802.11AC 1x1 + Bluetooth 4.0 Combo • Front Ports: 4 x USB 3.1 Gen 1 2 x USB 3.1 Gen 2

Qty 10

Estimated Cost Rs. Million

1.50 Amount of

CDR Rs.30,000/

-

Optional Card Reader 2 x Audio • Rear Ports: 3 x Audio 1 x VGA 1 x DP 1 x HDMI 4 x USB

22

2.0 1 RJ-45 1 serial 1 optional parallel • Expansion Slots: 1 x PCIe x 16 1 x PCIe x 1 M.2 for WIFI

M.2 for PCIe SSD • Power Supply 180 W 85% • Onboard Gigabit Ethernet Port, Realtek RTL8111HN,

Wake on LAN • 21.5" FHD Near edgeless wide viewing angle panel,

Brightness :250 cd/m2, Contrast Ratio: 41.7 • Mouse (USB connector) • Keyboard (USB connector) • 01 Year standard warranty. • Tower Casing • Operating System: Windows 10 64 bit

23

Printers • Functions: Print, copy, scan and optional fax • Print Technology: Laser • Print Speed: Black (A4, normal) Up to 28 ppm; Black

(A4, duplex) Black (A4, duplex): Up to 18ppm; • First page out Black (A4, ready): As fast as 6.4 sec; • Black (A4, sleep) As fast as 7.7 sec; • Print Resolution: Black (best): Up to 1200 x 1200 dpi; • Monthly Duty Cycle: Up to 30,000 pages A4

03

Estimated Cost Rs. Million 0.210 Amount of CDR

Rs. 4200/-

• Memory, standard: 256 MB (printer) • Memory, maximum: 256 MB • Networking: Built-in wireless networking

(802.11b/g/n) • Duplex Printing: Automatic (standard) • Copy Speed: Black (A4): Up to 28 cpm • Cable included: Must included • Operating environment: • Temperature: 15 to 32.5ºC; Humidity: 30 to 70% RH • Compatible operating systems • Windows Client OS (32/64 bit), Win10, Win8.1, Win 8

Basic, Win8 Pro, Win8 Enterprise, Win8 Enterprise N, Win7 Starter Edition SP1, UPD Win7 Ultimate, Mobile OS, iOS, Android, Mac, Apple® macOS Sierra v10.12, Apple® macOS High Sierra v10.13, Apple® macOS Mojave v10.14, Discrete PCL6 Printer Driver.

• Warranty: One-year, next-business day, onsite warranty.

24

ACS FOR

Chemistry Lab.

1.5 Ton inverter AC with both heating and cooling option, Capacity: 18000 BTU, 230V/single phase/50 Hz, Auto-voltage adaptation: 150-260 V, refrigerant: R410 or equivalent, with installation including all accessories wires etc

6 .


Rs. 16800/-

26

Multimedia 3 LCD Technology , 1024 X 768, Lumens 3300 or better, Contrast 1:15000, Lamp Life 10000 Hours, Ports HDMI,USB,VGA, Ciel Mount Kit 03 Cables Safty Box etc,

02


Rs. 5600/-



OF

EQUIPMENT COMPUTER SCIENCE AND ENGINEERING DEPARTMENT

















Campus.










good offered.





Lahore without which bids will not be entertained estimated costs and amounts of

CDRs are given on Specification pages for Each Lab . Bank Guarantee is not

acceptable.

(b) the successful bidder will arrange two stamp paper @0.25% on total value of issuance of Purchase Order.

13. A.If the successful bidder fails to supply the equipment within stipulated period



purchase the equipment from other suppliers and any difference in payments would be

liability of the successful bidder failed to supply alone with the penalties mentioned in para 13 Clause A.










replacement found during the warranty period. Warranty period will be three years

from the date of installation.

19. Deduction of Income Tax and other taxes of any kind will be deducted at the source according to Governments prevailing rules.



21. After Sale service and supply of spare parts must be guaranteed for a period of three

year the supplier must inspect the supplied items after 12, 24 and 36 months and get

the certificate of inspection from UET Narowal Campus.




entertained.





inspected at UET Lahore Narowal campus and will have the right to reject the











Dr.Muhammad Idrees

Head

Computer Science and Engineering

Department UET Lahore. Narowal

Campus 03004590301

Programming Lab.

item Description

qty Estimated cost and Amount of

CDR Rs.

Branded Computers with

original Software

• Processor Intel Core i7-9700 3.0GHz up to 4.7 GHz Processor

• RAM: 16GB, extendable up to 32 GB DDR4 2666 MHz

• HDD: 1TB Serial ATA (7200 RPM)

• Wireless LAN: 802.11AC 1x1 + Bluetooth 4.0 Combo

• Front Ports: 4 x USB 3.1 Gen 1 2 x USB 3.1 Gen 2 Optional Card Reader 2 x Audio

• Rear Ports: 3 x Audio 1 x VGA 1 x DP 1 x HDMI 4 x USB 2.0 1 RJ-45 1 serial 1 optional parallel

• Expansion Slots: 1 x PCIe x 16 1 x PCIe x 1 M.2 for WIFI M.2 for PCIe SSD

• Power Supply 180 W 85%

• Onboard Gigabit Ethernet Port, Realtek RTL8111HN, Wake on LAN

• 21.5" FHD Near edgeless wide viewing angle panel, Brightness :250 cd/m2, Contrast Ratio: 41.7

• Mouse (USB connector)

• Keyboard (USB connector)

• 01 Year standard warranty.

• Tower Casing

• Operating System: Windows 10 64 bit

30

(Estimated Cost Rs.4.5 Million Amount of CDR Rs.90000/-)

Multi-function

Printer • Functions: Print, copy, scan and optional fax

• Print Technology: Laser

• Print Speed: Black (A4, normal) Up to 28 ppm; Black (A4, duplex) Black (A4, duplex): Up to 18ppm;

• First page out Black (A4, ready): As fast as 6.4 sec;

• Black (A4, sleep) As fast as 7.7 sec;

• Print Resolution: Black (best): Up to 1200 x 1200 dpi;

• Monthly Duty Cycle: Up to 30,000 pages A4

• Memory, standard: 256 MB (printer)

• Memory, maximum: 256 MB

• Networking: Built-in wireless networking (802.11b/g/n)

• Duplex Printing: Automatic (standard)

• Copy Speed: Black (A4): Up to 28 cpm

• Cable included: Must included

• Operating environment:

• Temperature: 15 to 32.5ºC; Humidity: 30 to 70% RH

• Compatible operating systems

• Windows Client OS (32/64 bit), Win10, Win8.1, Win 8 Basic, Win8 Pro, Win8 Enterprise, Win8 Enterprise N, Win7 Starter Edition SP1, UPD Win7 Ultimate, Mobile OS, iOS, Android, Mac, Apple® macOS Sierra v10.12, Apple® macOS High Sierra v10.13, Apple® macOS Mojave v10.14, Discrete PCL6 Printer Driver.

• Warranty: One-year, next-business day, onsite warranty.

10


2. Data Base and Operating Systems Lab. item Description

qty Estimated cost and Amount of CDR Rs.

Apple iMac 21.5" • 21.5-inch (diagonal) Retina 4K (4096*2304) display, 500 nlts brightness, wide color (P3)

• 3.4GHz Quad -Core Intel Core i5 (Turbo Boost up to 3.8GHz)

• 8GB 2666MHz DDR4 memory configurable up to 32GB

• 1TB Fusion drive, Configurable 256GB, 512GB, or 1TB SSD

• Radeon Pro 560X with 4GB of GDDR5/VRAM memory

• Two Thunderbolt 3 ports

• Native Display Port output over USB-C

• Thunderbolt 2, HDMI, DVI, and VGA output supported using adapters (sold separately)

• Stereo speakers

• Microphone

• 3.5 mm headphone jack

• Support for Apple iPhone headset with microphone

• SDXC card slot

• Four USB 3 ports (compatible with USB 2)

• Two Thunderbolt 3 (USB-C) ports

• 802.11ac Wi-Fi wireless networking IEEE 802.11a/b/g/n compatible

• Bluetooth 4.2 wireless technology

• FaceTime HD camera

• MacOS Operating System

18


3. Data Communication and Networks Lab.

item Description

qty Estimated unit

Price Rs.

1. Branded Computers with original Software

• Processor Intel Core i7-9700 3.0GHz up to 4.7 GHz Processor

• RAM: 16GB, extendable up to 32 GB DDR4 2666 MHz

• HDD: 1TB Serial ATA (7200 RPM)

• Wireless LAN: 802.11AC 1x1 + Bluetooth 4.0 Combo

• Front Ports: 4 x USB 3.1 Gen 1 2 x USB 3.1 Gen 2 Optional Card Reader 2 x Audio

• Rear Ports: 3 x Audio 1 x VGA 1 x DP 1 x HDMI 4 x USB 2.0 1 RJ-45 1 serial 1 optional parallel

• Expansion Slots: 1 x PCIe x 16 1 x PCIe x 1 M.2 for WIFI M.2 for PCIe SSD

• Power Supply 180 W 85%

• Onboard Gigabit Ethernet Port, Realtek RTL8111HN, Wake on LAN

• 21.5" FHD Near edgeless wide viewing angle panel, Brightness :250 cd/m2, Contrast Ratio: 41.7

• Mouse (USB connector)

• Keyboard (USB connector)

• 01 Year standard warranty.

• Tower Casing

• Operating System: Windows 10 64 bit

40

(Estimated Cost Rs.6.0 Million Amount of CDR Rs.120,000/-)

Net Working Equipment Estimated Amount Rs.1.745 Million Amount of CDR Rs.34900/-

Ethernet Router

Managed • Router should deliver highly secure data/ Voice/ Video/ application

Services.

• Forwarding Performance in Service (IMIX) should be 750Mbps or

above

• CPU Support at least 1.3GHz Processor Multicore or Higher

• At least 9 x 1 Gbps Electrical Ports 1 SFP Port.

• 1 x USB port

• Must support Ethernet, Ethernet II • Must support 802.3x flow control

10

50,000

• Must Support port based VLAN and guest VLAN

• Ping, Tracert, ICMP, DHCP server, DHCP relay, DHCP client, DNS

client, DNS proxy, DDNS, NTP, and SNTP

• Must support IPv4 and IPv6 routing protocols including static routing,

RIP, OSPF, BGP, IS-IS, RIPng, OSPFv3, IS-ISv6, BGP4+

• Must support LDP, Static LSP, L3VPN: Inter-AS MPS VPN (Option

1/2/3), MPLS nested VPN, hierarchy of PE (HoPE), dual-homed CE,

MCE, and multirole host, L2VPN: Martini, Kompella, CCC PWs and

static PWs, MPLS TE, RSVP TE

• Must support LR, port-based mirroring, Port Trust Mode, and port

priority

• Must Support Committed access rate (CAR), FIFO, WFQ, CBQ,

Generic Traffic Shaping (GTS) and Traffic classification.

• Must support Basic Firewall Function, ASPF, ACL, filter, connection

limit

• Must support IKE, Ipsec, L2TP, NAT/NAPT, PKI, RSA, SSH v1.5/2.0,

URPF, mGRE, GRE

• Must support ARP attack prevention SSL VPN, ADVPN, GDVPN

• Must support Local authentication, RBAC, RADIUS, TACACS+

• Must support AES, DES, 3DES, MD5, SHA1

• Must support SNMP v1/v2c/v3, MIB, SYSLOG, RMON, BiMS remote

management, booting from USB drive, CLI, file system, and dual

image. DHCP, FTP, HTTP, ICMP, UDP public, UDP private, TCP

public, TCP private, and SNMP. Console port login, Telnet (VTY)

login, SSH login, and FTP login

• Must support Packet filtering, including stateful filtering, MAC address

filtering, IP and port number filtering, and time range filtering.

Layer 3 Managed

Switch

• The switch must have switching capacity more than 102 Gbps

• The switch must have forwarding capacity more than 75 Mpps

• At least 48 x 10/100/1000Base-T RJ-45 Ethernet ports and

4 x GE SFP ports

• Must support to limit MAC addresses

• Must support 802.3x flow control

• Must Support for QinQ, Voice VLAN and port based VLAN

• Must Support DHCP Client, Server and Option 82

• Must support Broadcast storm control

• Must support Layer 2 protocols including STP, RSTP, MSTP, STP

Root protection.

• Must support at least 16k MAC entries

• Must support VLANs Must support IPv4 and IPv6 routing protocols

including static routing, RIP, OSPF, RIPng, OSPFv3

• Must support Packet filter, bidirectional ACL, port-based rate limit and

time range ACLs.

• Must support authentication protocols including 802.1x and MAC based authentication

• Must support port isolation and IP Source Guard

• Must support TACACS or equivalent

• Must support configuration through CLI, Telnet, Console, SNMP and

RMON

05

80,000

Switches 24 Port

Fast Ethernet)

• The switch must have switching capacity of 48 Gbps

• The switch must have forwarding capacity more than 35 Mpps

• At least 24 x 10/100/1000Base-T RJ-45 Ethernet ports

• Must support 802.3 Ethernet, 802.3u Fast Ethernet, 802.1p Priority

Queuing

• Support for automatically adjusts for straight-through or crossover cables on all RJ-45 ports.

• Must support high-speed Ethernet connections over highly affordable

copper Category 5e cabling.

05

20,000

Access point

managed

Fully comply IEEE802.11a/b/g/n/ac, support working in both 2.4GHz and 5GHz

meanwhile, data rate min 600 Mbps, Security features WEP, WPA-PSK, WPA-

Enterprise (WPA/WPA2, TKIP/AES), MAC address authentication.

05

8,000

Wireless LAN

cards

Standards:

IEEE 802.11ac/n/a 5 GHz

IEEE 802.11n/g/b 2.4 GHz Wireless Data Rates: Up to 1.2Gbps

Security: Support 64 / 128-bit WEP, WPA / WAP2, WPA-PSK / WPA2-PSK,

802.1x Interface: PCI Express

Frequency Band: 2.4 GHz / 5 GHz

Modulation: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM Transmitted Power:5 GHz : 24 dBm (FCC) / 23 dBm (CE) (EIRP)

2.4 GHz : 25 dBm (FCC) / 20 dBm (CE) (EIRP)

40

3,000

Antenna: 2 x Dual Band Detachable Antennas

Network Tool kit Computer Tool Kits for Network Cable Maintenance Tools - RJ45/RJ11/8P8C Connectors, LAN/Cat5e/Cat6 digital Cable Tester, Soldering Iron, Ethernet Stripping/Crimp Pliers etc. Tool kit.

10

50,000

Console Cable USB Console Cable USB to RJ45 Cable for Cisco, NETGEAR, Ubiquity, LINKSYS, Huawei, Juniper, TP-Link Routers/Switches for Laptops & Desktop in Windows, Mac, Linux (Blue) OS.

10

3,200

USB to Serial

cable

Standard

10

1,000



OF

LAB EQUIPMENT MECHANICAL ENGINEERING DEPARTMENT








2. Responding organizations shall deliver sealed proposal of the “TECHNICAL &

FINANCIAL PROPOSALS” before or on 15th June, 2020 at 9:30 a.m.





4. Bidders are advised not to quote different options (only one option is to be quoted).

Received bid with different options shall not be entertained.




Campus.


8. a. Delivery period Should not exceed 8 weeks from the date of placement of order.








good offered.



12. (a) Bids must be accompanied by 2% of estimated cost as Earnest Money in the shape

of CDR in the name of Treasurer, University of Engineering and Technology, Lahore

without which bids will not be entertained. Bank Guarantee is not acceptable.

Estimated Cost is as under:-

a. Thermodynamics Lab. Amount of CDR Rs.230000/-

b. Heat Transfer Lab. Amount of CDR Rs.140000/-

c. Mechanics of Machines Lab. Amount of CDR Rs.130000/-

d. Metrology and Quality Assurance Lab. Amount of CDR Rs.220000/-

(b) The successful bidder will arrange two stamp paper @0.25% on total value of issuance of Purchase Order.




purchase the equipment from other suppliers and any difference in payments would be

liability of the successful bidder failed to supply alone with the penalties mentioned in

para 13 Clause A.

14. The equipment must be in accordance with the offered specifications, Country of

Origin Should be China, Indonesia. Malaysia, Taiwan and South Korea Thailand .















year.




entertained.
















Mr. Nazim Waheed

Head

Mechanical Engineering Department


03030505736

Thermodynamics Lab Estimation at MED Narowal Campus

SN Equipment

Standard Name Technical Specifications Qty

Total Cost (Rs.

Million)

1

Fundamentals of

Humidity

Measurement

Apparatus

Climatic chamber with adjustable

humidity and transparent door,

humidification via ultrasonic atomiser,

dehumidification via Peltier cooling

element, 2 mechanical instruments

including psychrometer and hair

hygrometer, 2 electronic instruments

including capacitive sensor, and

hygrometer with synthetic fibre and

combined temperature sensor. Complete

with all accessories/attachments

including installation of equipment.

1

0.500

2

Change of State

of Gases

Apparatus

2 transparent measuring tanks, built in

compressor with outlet pressure range 2-

4 bar, hydraulic oil filling for changing

volume of test gas, electrical heater with

temperature control in tank 2, sensors

and digital displays for temperatures,

pressures and volumes. Complete with all accessories/attachments including

installation of equipment.

1

1.000

3

Thermal

Conductivity

Measurement

Unit

Investigation of thermal conductivity of

different metals, adjustable heater with

heating power range 30-50 W,

Measuring temperature range 200-300⁰ C, display of temperatures and power

consumption in the software. Complete

with all accessories/attachments including installation of equipment.

1

0.800

4

Thermal

Convection and

Radiation

Measurement

Unit

Investigation of heat transfer between

heated metal cylinder and vessel wall by

convection and radiation, vacuum

generation with rotary vane pump upto

1.5 bar, Measuring temperature range

200-250⁰C, digital displays for

temperature, pressure and heating

power. Complete with all accessories/attachments including


1

1.600

5

Advanced

Temperature

Measurement

Trainer

Steady and transient temperature

measurement with typical measurement

instruments, temperature controller,

temperature sensors: liquid

thermometer, bimetal thermometer,

Pt100, thermistor (NTC), type K

thermocouple. Measuring temperature

range 0-100⁰C. Complete with all

accessories/attachments including installation of equipment.

1

1.200

6

Single Stage

reciprocating

air compressor,

computer

controlled

single-stage piston compressor with

max. pressure 5-8 bar, intake vessel and

pressure vessel, both with pressure

sensor and additional manometer, safety

valve and pressure switch with solenoid

valve for limiting the pressure, digital

display for air flow rate, temperatures,

pressures, differential pressures and

compressor speed. Single phase.

Complete with all

accessories/attachments including installation of equipment.

1

1.500

7

Evaporation

Process

Demonstratio

n Unit

Visualization of evaporation in a tube

evaporator, Heater Power range 1-2

KW, heating circuit with heater, pump

and expansion vessel, safety valve.

Complete with all accessories/attachments including installation of equipment.

1

1.000

8

Condensing

Process

Demonstratio

n Unit

Condensing unit with main components:

compressor, condenser, filter/dryer,

receiver and humidity indicator.

Pressure switch for compressor, flow

measurement via rotameter. Single

Phase. Complete with all

accessories/attachments including


1

1.300

9

Marcet

Boiler

Apparatus

Pressure boiler with insulating jacket for

vapour pressure measurement,

temperature limiter and safety valve as

safety devices, pressure measurement by

Bourdon tube pressure gage, digital

temperature display, Measuring

temperature range 150-200⁰C,

Measuring pressure range 15-20 bar.

Complete with all accessories/attachments including


1

1.100

10

Single

Cylinder

Steam engine

Single cylinder steam engine with

alternator, Motor power 2HP. Single

Phase. Complete with all

accessories/attachments including


1

1.500

Total 11.5

Heat & Mass Transfer

SN Equipment

Standard Name Description Qty

Total Cost (Rs.

Million)

1

Fluidized Bed

Heat Transfer

Unit

The experimental setup should facilitate

and provide visual and quantitative

results related to the flow of air through

both packed and fluidised bed of

granular material and calculations of

other related parameters and should

come up with required accessories.

1 0.800

2

Free & Forced

Convection from

Flat, Pin and Fin

Plates

The experimental setup with all required

accessories, should facilitate study of

free and forced convection over

different geometries and calculations of

related parameters

1 0.900

3 Closed Cycle

Hot Air Engine

The experimental setup (including

standard instrumentations and

accessories) designed to allow students

to experimentally investigate one of the

methods available to convert heat

energy directly into work.

1 0.700

4

Multipurpose

Air duct and

Heat transfer

Unit

The experimental setup should allow

basic experiments to investigate the heat

transfer in air flows through the air duct

and should allow the air duct

experimentations for other multi-range

purposes. It should have standard

instrumentation and come up with all

required accessries

1 0.900

5

Heat Transfer

by Convection &

Radiation

Apparatus

The experimental setup should come up

with all required accessories to allow

basic experiments on the topic of

convection and radiation heat transfer

and calculations of the other related

parameters

1 1.000

6

Heat Transfer in

a Tubular Heat

Exchanger

A labortary scale expermintal setup,

including all accessories, computer

interfaced data aquisition to perform

experimentation on heat exchangers of

different types. It should come up with

different heat exchangers including shell

& tube, concentric tube, jacketed vessel,

plate type, tubular, cross flow heat

exchangers or better.

1 0.800

7 Water to Air Heat

Transfer

Apparatus

The experimental setup should allow

several experiments relevant to the thermal

exchange phenomena connected to

convection and conduction and some

experiments to fluid dynamics. In particular,

it should facilitate the study of the thermal

exchange between a gas like air and a liquid

like water and should come up with all

required accessories.

1 1.000

8 Steam to Water

Heat Exchanger

The experimental setup should facilitate

the study of the thermal exchange

between steam and water allowing

several related experiments and should

come up with all required accessories.

1 0.850

9

Temperature

Measuring Laser

Gun

The experimental setup should come up

with nominal range of digital

temperature measurements having their

conversion scales and providing good

accuracies to perform several

experiments and should come up with

all required accessories.

1 0.050

Total 7.000

Mechanics of Machines Lab.

SN Equipment

Standard Name Description Qty

Total Cost

(Rs. Million)

1 Gear Box

Apparatus Gear box apparatus with all accessories. 1 1.1

2 Disk brake

apparatus

Disk brake appratus, set of wieghts with all

required accessories 1 0.8

3

Reciprocating

and Rotating

Balancing

Machine

Lab Scale reciprocating and rotating

masses balancing machine with all required

accessories.

1 1.35

4 Gear Train

Apparatus Gear Train apparatus with all accessories. 1 0.3

5

Gear Assembly

Unit, Combined

drives

Gear assembly unit enabling study different

drive arrangements with all required

accessories.

1 0.5

6

Worm and

Wheel

Apparatus

Worm and wheel apparatus, set of weights

alongwith all required accessories 1 0.2

7 Gear Tooth

Form

Gear Tooth Form Apparatus with all

accessories. 1 0.15

8 Winch

apparatus

Winches apparatus, set of weights, rope

alongwith all accessories 1 0.25

9 Gear Efficiency

Apparatus

Gear Efficiency apparatus with set of

required accessories 1 0.6

10

Vibrations on

Machine

foundations

Lab scale unit to study vibrations on

machine foundations alongwith all required

accessories.

1 0.75

11 Screw Efficiency

Apparatus

Screw efficiency apparatus with all

required accessories. 1 0.5

Total 6.5

Metrology & Quality Assurance Lab Estimation at MED Narowal Campus

SN Equipment

Standard Name Technical Specifications Qty

Total Cost

(Rs. Million)

1 Gauge Blocks Standard size. 1 0.25

2

CMM Digital

Interface with

CAD

Integration

Multi-threading, Faster auto normal, CAD editor, best fitting faster and smoother display.

1 1

3 Optical

Comparator

work table , clamping slots, good measuring travel, allowable work load, two lens turent, digital screen protractor, duplex surface.

1 0.85

4 3D Profilometer

good roughness and topo graphy , probe radius 100m, good scan area, vertical resolution greater than 1nm, stylus loading force 1-100 mg

1 4.5

5 Ultra high

precision CMM

leading accuracy 0.28um, fixed bridge structure with moveable table, base is made of cast iron, less vibrating structure with heavy weight.

1 3.1

6 Auto Collimator

focal length 163mm- 430mm, dual axis micrometer, angular range of measurement +/- 10 mins. Resolution 1 arc sec. accuracy 2 arc sec 1 mins.

1 0.2

7

Rotating Multi-

component

Dynamometer

rotating 4 component cutting force dynamometer, non contacting transmission, measuring range upto 20kN, 30KN, and 1000 N.M.

1 0.3

8

Surface

Roughness

Tester

Measuring range: 0-25 mm, Material: stainless steel, Meter type: Analog, Shape: Round, tracing length 6mm, cutt off length 0.25mm

1 0.4

9 Infrared

Pyrometer

Resolution upto o.1 degree, accuracy +-3% of +-2 degree, distance to spot ratio 30: 1 , response time <250ms, single laser point.

1 0.3

10 Dial Callipers standard size 5 0.05

11 Micrometers Standard Size. 5 0.05

12

Total

11

Engr. Nazim

Waheed

HOD Mechanical Engineering



OF

LAB EQUIPMENT BIOMEDICAL ENGINEERING DEPARTMENT


1. . Single stage/two envelope bidding procedure shall be applied in response. The


PROPSAL”. The financial proposal of bids found technically non-responsive shall

be returned unopened to the respective bidders. Technically responsive bidders

shall be informed and their financial bids shall be opened in the next Central

Procurement Cell (CPC) meeting after informing the technically responsive

bidders.



delivered at the address given below before time. The TECHNICAL

PROPOSALS shall be opened on the same day at 10:00 a.m. in the presence of

bidders or the representatives of the responding organizations.



6. The prices, including all taxes, should be quoted item-wise in Pakistani Rupees so

as to reach the premises of the University of Engineering &Technology Lahore

Narowal Campus.




b. after 8 weeks successful bidder will be fined 0.5% per week of the total

payable which will be deducted from his payment. The relaxation in the delivery

time will not be provided more than 4 weeks after the expiry of delivery time of 8

weeks.




good offered.





Lahore without which bids will not be entertained. Bank Guarantee is not

acceptable. Estimated costs are given on tender Notice against each Lab.

Name of Lab Amount of CDR

1.Medical Terminology Rs.4900/-

2.Anatomy Physiology Lab Rs.77700/-

3.Electromechanical Systems Technologies Rs.134940/-

4.Diagnostic and Monitoring Medical Devices Rs.53680/

5.Clinical Laboratory Instrumentation and

Automation

Rs.19680/

6.Therapeutic Critical Care and Life Support

Medical Devices

Rs.33560/

7.Bioinstrumentation and Bioelectronics Rs.140400/

(b) the successful bidder will arrange two stamp paper @0.25% on total value of

issuance of Purchase Order.




purchase the equipment from other suppliers and any difference in payments would be liability of the successful bidder failed to supply alone with the penalties

mentioned in para 13 Clause A.

14. The equipment must be in accordance with the offered specifications and

Country of Origin must be UK, Europe, Japan, Australia, Oceania, U.S.A

&Canada.



16. The successful bidder(s) shall get the equipment inspected at their premises

workshop before its dispatch to UET Lahore Narowal Campus.


18. 10% security of total value of Purchase order/bill shall be deducted at the time of

bill process. The deducted amount as security will be returned after successful

completion of Defect Liability / Warranty Period, after repairing the defects in the

equipment / replacement found during the warranty period.

19. Payment will be made on availability of funds, if delayed due to any reason; no

extra interest / mark-up will be accepted or paid.

20. Deduction of Income Tax and other taxes of any kind will be deducted at the

source according to Governments prevailing rules.



22. After Sale service and supply of spare parts must be guaranteed for a period of

one year.

23. The original Request for Proposal documents duly signed and officially sealed by

the bidder must be submitted in whole with the proposals. Any conditional,

ambiguous, incomplete, supplementary or revised offer after the opening of tender

shall not be entertained.

24. Any overwriting/crossing, etc. appearing in the offer may be properly signed by

the person signing the tender. All pages of the tender must be properly signed &

stamped. Offer with any overwriting/use of Blanco shall not be accepted in any

circumstances.





provided in the tender, either on account of inferior quality, defective

workmanship, faulty design, faulty packing or is short supplied, or wrongly

supplied, the supplier shall replace the same free of charges.






Dr.Farooq Ahmad

Head

Biomedical Engineering Department


03214070674

1. Medical Terminology and Biology for Engineers

Item

No. Equipment with Technical Specification Quantity

1 Animal Cell Model

-Large Size

-Base Mounted

1

2 Plant Cell Model

-Large Size

-Base Mounted

1

3 Bacterium Model

-Large Size

-Base Mounted

1

4 DNA Double Helix Model

-Large Size

-Base Mounted

1

5 Virus Model

-Large Size

-Base Mounted

1

6 Wall Charts

-FramedWall Charts (size atleast 80×110cm) each illustratingCell, Neuron,

Homeostasis, Skeleton, Heart, Kidney, Liver, Stomach, Brain, Ear, Teeth, Eye,

Muscle Tissue, Metabolic Pathways, Skin, Central Nervous System,

Cardiovascular System, Gastrointestinal System, Respiratory System

1 Each

7 Prepared Slide Set for Microscope

-Comes with Storage Boxand containing slides ofMixed Bacteria Types,

Amoeba, Euglena, Paramecium, Rhizopus, Sporangia, Buttercup Root, Corn

Stem, Privet Leaf, Hydra, Earthworm, Human Blood Smear, Spirogyra,

Human Cell Division Phases etc.

1

Anatomy, Physiology and Biophysics for Engineers

Item


1 Disarticulated Human Skeleton Model

-Life Size Adult and Half Side included, Complete in mounted skull, sternum, hyoid,

and spinal column etc., Connected hand and foot

-Storage Box

1

2 Shoulder Joint Model

-Life Size Adult Functional Model, includes Scapula, part of Clavicle, Top portion of

humerus, ligaments stretch etc.

-Base Mounted

1

3 Hip Joint Model

-Life Size Adult Functional Model, Includes Functional hip joint, femoral head in the

socket, ligaments stretch etc. -Base Mounted

1

4 Multipart Brain Model

-Life size Adult Human, medially divided and both halves, can be disassembled into

Frontal with parietal lobes, Temporal with occipital lobes, Half of brain stem, Half of

cerebellum etc. -Removable base.

1

5 Stomach Model

-Life Size Adult, shows layers of stomach wall, The front half of the stomach is

removable for detailed study

-Base Mounted

1

6 Lung Model

-Life Size Adult Human, Cut-away of lung shows bronchus, arteries, veins, lymph

nodes, bronchial passages and trachea bifurcation etc.

-Base Mounted

1

7 Functional Model for Eye

-To demonstrate the optical functions of the human eye, e.g. representation of an

object on the retina, accommodation, short-sightedness and far-sightedness etc.

-Package includes all necessary components like eyeball and lenses, illumination

source, sliding mechanism etc.

1

8 Functional Model for Ear

-To show the operation of human ear from a functional prospective

-Package includes all necessary components like tympanic membrane, ossicles,

cochlea, basilar hearing membrane, supporting base etc.

1

9 Physiology Teaching Platform (Power Lab or Equivalent)

The system should be able to acquire, analyze and record all important biomedical

signals with stimulator, related to the study of human physiology. The hardware is

fully integrated to software with online & offline recording and analysis capability.

Package is complete in all aspects and with comprehensive teaching and study support

material.

Note:

Each package must be delivered with a pre-configured desktop PC and necessary

software installed, should have option to create new experiments for deep

understanding of physiological concepts and be in fully operational condition. It must

also include all Compatible Transducers, Electrodes, Accessories, Consumables,

Power Supply (for 220V), and Operation Manual, etc.

3

3. Electromechanical Systems Technologies

Item


1 Plasma cleaner

Chamber Dimensions 3” diameter by 7” deep

System Dimensions 8” H x 10” W x 8” D

System Weight 12 lbs

Chamber Material Pyrex

Input Power 100 W

RF Frequency 8 -12 MHz

Inlet 1/8” NPT needle valve

Outlet 1/2” O.D. glass or quartz tubing

1

2 Optical microscope

Macro imaging Super widefield overview image with up to 40

mm scan field on the sample

Illumination system – Full LED incident light illumination;

viewing techniques:

Brightfield, darkfield, DIC, qualitative POL, oblique illumination,

UV, OUV

– Full LED transmitted light illumination; viewing techniques:

Brightfield, qualitative POL

Status feedback Status indicator on front

Service interval indicator (on back of instrument)

Operation support Integrated contrast manager

Integrated illumination manager

Objective nosepiece Motorized, brightfield/darkfield objectives

(M32), 6-position

Microscope stages Manual inspection stage 8 x 8

Electrical system Supply voltage: 100–120/220–240 V AC,

50/60 Hz

1

3 Digital microscope

10x-50x, 230x magnification

640x480 pixel resolution

USB 2.0

4 LED always on

PC/Mac Compatible

Windows RT tablet-compatible

2

4 Temperature and humidity chamber

User-friendly touch-screen operation

Three different ‘constant mode’ settings can be

saved for single-setting operation

1

Store 40 cycling programs, with up to 99 steps

each

Programs may be written on a PC and uploaded

via USB

The trend-graph display shows a record of

setpoints and actual values

Operation data can be downloaded as needed,

or continually, to USB

System alarms are stored in memory for

historical review

Built-in timer functions allow the chamber to

be started or shut down automatically

5 850 Universal interface

Four Analog Ports

Input Protection: ±250V continuous

Selectable Voltage Gain: X1, X10, X100,

X1000

High Speed Sampling

Measure voltages on two channels with sample

rates of up to 10 MHz simultaneously or on

three or four channels at up to 1 MHz

simultaneously.

15 W Function Generator

Waveforms: sine, triangle, variable duty-cycle

square wave, positive and negative ramps, DC

Frequency Range: 0.001 Hz to 100 kHz; 1 mHz

resolution

Amplitude Range: ±15 V

Resolution: 7.3 mV, 12-bit DAC

Max Output Current: 1 A at 15 V, over-current

detection

Dual Independent High Frequency Function

Generators

Independent control of frequency, waveform,

and amplitude

Waveforms: sine, triangle, variable duty-cycle

square wave, positive and negative ramps, DC

Frequency Range: 0.001 Hz to 500 kHz; 1 mHz

resolution

Amplitude Range: ±10 V

Resolution: 2.5 mV, 12-bit DAC

Max Output Current: 50 mA at 10 V

Computer Connection

USB 2.0 or 3.0

2

6 Vibration shaker

Wide frequency band combined with high peak

forces

1

• Low mass, high performance armature

construction

• Base or trunnion mounted

• Powered by compact, quiet and energy

efficient amplifiers

• Robust, lightweight suspension system provides

excellent torsional and traverse stiffness with

minimal impact on system acceleration

7 Capacitive box, MS3110BDPC (or equivalent)

The MS3110 is a general purpose, ultra-low

noise CMOS IC that transforms a changing

input capacitance into an analog

output voltage. The MS3110 can be interfaced

to either differential or single capacitor

elements. Sensitivity to

4.0aF/rtHz is typical for the IC. The MS3110 is

extremely flexible, with many adjustable

parameters including gain,

bandwidth, and offset. An on-chip EEPROM is

used to store desired settings. Only a single

+5Vdc supply and a few

decoupling components are required for

operation

1

8 Hairnet 20

9 Facemask 10

10 Bunny Suits 20

11 Booties 20

12 Gloves 10

13 Silicon wafers Packs of 4,6,8 inch 1

4. Diagnostic and Monitoring Medical Devices

Item


1 Human merging frequency and upper hearing threshold measurement system Determine

the merging frequency and upper acoustic threshold of test subjects of various ages. Stimulate the ear with tones at the lower and upper acoustic threshold using a sine wave generator and

headphones.

-Digital audio function generator

-Stereo Headphone

Note:

Each package must be in fully operational condition. It must also include all

2

Compatible Transducers, Electrodes, Accessories, Consumables, Power Supply (for

220V), and Teaching material, etc. (PC should be provided if applicable)

2 Subjective colour mixing with the colour wheel system

Reproduce the perception of a mixed color or of white using rotating colored discs.

-Rotating Colored Disc

-Adjustable Power Supply

Note:




2

3 Human visual field determination system

Determination of the visual field of the right and left eye for white, blue, red and

green. Detection of any visual field deficiency (scotoma).

-Appropriate perimeter

-Protractor scale

Note:




2

4 Time Resolving capability of the Human Eye

Determination of relation between the light’s incidence angle and flicker fusion

frequency to measure time resolving capacity of human eye.

-Digital function generator with stimulant light source

-Appropriate perimeter

Note:




2

5 Measuring reading skills system

Determination of subject’s reading speed. It is an important prerequisite for the proper

handling of all kinds of texts by precisely studying the movement of eyes during the

electrophysiological measurement. -Appropriate Data Acquisition Unit

-Relevant sensors and electrodes

Note:




2

6 Diagnosis of lung disease (FEV) system

The system is intended to relate to medical diagnostics in the field of pulmonary function tests.

-Appropriate Data Acquisition Unit -Relevant spirometery sensors

-Multiple disposable mouthpiece

Note:


2



7 Direct determination of lung volume from a spirogram

The apparatus is meant to provide students an understanding of spirometery.

-Appropriate Data Acquisition Unit -Relevant spirometery sensors

-Multiple disposable mouthpiece

Note:




2

8 Digital Kymograph

The device consists of

-Revolving drum wrapped with a sheet of paper

-Digital speed controller

-Adjustable power supply Note:




1

5. Clinical Laboratory Instrumentation and Automation

Item

No. Equipment with Technical Specification Quan

tity

1 Absorption of light (UV-VisSpectroscopy)

▪ Spectrophotometer 190-1100nm with quartz cell

▪ Included volumetric flasks 100ml, pipette 1ml with dish, pipettor, weighing dishes,

steel micro spoon, 100micro-ltr syringe, 500ml wash bottle, funnel, glass etc.

Included (at least) e.g. Methanol 500 -750 ml, N’N-dimethylformamide puriss atleast 1 ltr,

ethyl alcohol abs.500 – 750 ml, ethylene glycol 250 – 500 ml, methyl orange soln. 0.1%

250-500 ml, Distilled water 1 ltr.

Note:


Compatible Transducers, Electrodes, Accessories, Consumables, Power Supply

(for 220V), and Teaching material, etc. (PC should be provided if applicable)

1

2 Refrigerator

▪ Basic clinical laboratory refrigerator

▪ Atleast 125L capacity, single glass door, 2-15 degree Celsius operation

▪ Controlled automatic operation, LED lighting

▪ Locking mechanism, caster wheels, stainless steel interior

Note:

1



(for 220V), and Teaching material, etc.

6. Therapeutic, Critical Care and Life Support Medical Devices

Item


1 Defibrillator

-Automatic biphasic external defibrillator with LCD display

-ECG synchronized operation

-Adjustable energy range (atleast 200J)

-Less charging time (max 8 secs).

Note:




1

2 Diathermy

-Microprocessor based Electrosurgical system monopolar and bipolar

controls

-RF power for monopolar cutting atleast 100 watt

-Output power for bipolar coagulation atleast 100 watt

-Included auto self-test, earth free patient circuit and patient plate and

control switch

-conform to I.E.C-601-1 standard or equivalent

Note:




1

3 Infant incubator

-Both microprocessor and manual control

-Digital display of parameters

-Skin, air temperature and humidity control

-Alarm for system failure

Note:




1

4 Multipara meter Bedside monitor

-Minimum 10 inches color touch screen multiple trace capability

-Built in NIBP,ECG,Temperature,SpO2,Respiration etc. measurement

-Atleast 3 hours battery operation

Note:




1

7. Bioinstrumentation and Bioelectronics

Item No. Equipment with Technical Specification Quantity

1 Electrical signal analysis system including oscilloscope, function generator,

digital multimeter, DC power supply

Equipment for learning fundamental concepts of electrical circuits and include

atleast:

• Mixed-signal oscilloscope

-Bandwidth 100 MHz-1GHz

-4 Channels

-Sampling rate 2.5-5 GS/s (single channel)

-Record length 8M points or more

• Function Generator

-Dual channel mode

-Max Frequency 20-30 MHz

-Sampling Rate 200 MSa/s or more

-Waveform types are sine, square, ramp, triangle, DC

• Digital Multimeter

-High Resolution, Voltage, Current Range

-Resolution 5-1⁄2 digits

-Voltage 250V or more

-Current 10A or more

-Multiple measurement functions e.g. (VDC, VAC, continuity,

resistance, diode etc.

• DC Power Supply

-Multiple Channel, Dynamic Voltage and Current Range

-3 Channels

-0 to +5 V / 0 to 1 A or more

-0 to +20 V / 0 to 0.5 A or more

-0 to -20 V / 0 to 0.5 A or more

Note:



(for 220V), and Teaching material, etc.(PC should be provided if applicable)

3

2 Basic electronics trainers including electronics engineering and operational

amplifier experimental modules

3

Enables the learner to quickly adapt to the analog and digital operational circuit

concepts with hands on training and includes atleast:

• Modular Platform

• Oscilloscope (400 kS/s – 800kS/s or more), Digital Multimeter (4-1/2 digits or

more), Function Generator (sinewave and squarewave), Variable Power Supply,

Breadboard for circuits and electronics etc.

• Allexperiments and instructor's manuals

Note:



(for 220V), and Teaching material, etc.(PC should be provided if applicable)

3 Sensor training hardware with multiple sensor experimental modules

Teach and demonstrate the fundamentals of operating with wide variety of

sensors commonly used today. The system must include a wide variety of

sensors including atleast:

• Modular Platform

• Strain gauge, Piezo film sensor, Potentiometer, Pressure sensor,

Temperature sensor, Range sensors, Encoders • All experiments and instructor's manuals

Note:

Each package must be in fully operational condition. It must also include

all Compatible Transducers, Electrodes, Accessories, Consumables, Power

Supply (for 220V), and Teaching material, etc.(PC should be provided if

applicable)

3

4 Specialized biomedical electronics application training hardware with

multiple test and simulation modules

Teach and demonstrate measuring circuits and detect the basic physiological signals with operation. Must include at least:

• Function Generator, A/D signal converter, Oscilloscope

• ECG, EMG, EEG, Blood Pressure,Simulator(s)

Note:

Each package must be in fully operational condition. It must also include

all Compatible Transducers, Electrodes, Accessories, Consumables, Power

Supply (for 220V), and Teaching material, etc. (PC should be provided if

applicable)

3



OF

LAB EQUIPMENT CIVIL ENGINEERING DEPARTMENT


1. Single stage/two envelope bidding procedure shall be applied in response. The envelops

shall be marked as “TECHNICAL PROPOSAL” and “FINANCIAL PROPSAL”. The

financial proposal of bids found technically non-responsive shall be returned unopened to

the respective bidders. Technically responsive bidders shall be informed and their

financial bids shall be opened in the next Central Procurement Cell (CPC) meeting after

informing the technically responsive bidders.


3. The Proposals will not be accepted after the due date &, time proposal shall be delivered

at the address given below before time. The TECHNICAL PROPOSALS shall be opened

on the same day at 10:00 a.m. in the presence of bidders or the representatives of the

responding organizations.



6. The prices, including all taxes, should be quoted item-wise in Pakistani Rupees so as to

reach the premises of the University of Engineering &Technology Lahore Narowal

Campus.





which will be deducted from his payment. The relaxation in the delivery time will

not be provided more than 4 weeks after the expiry of delivery time of 8 weeks.

9. Bidders must submit their tender duly signed, clearly indicating the offered specifications

of each item, specified in the Tender Document.

10. Offers must be supported with comprehensive sectioned literary of the materials / good

offered.

11. The University reserves the right, at the time of placing the order, to increase or decrease

the quantity of items.

12. (a) Bids must be accompanied by 2% of total estimated cost as Earnest Money in the shape



Amount of CDR IS AS Under :-

Name Of Lab Amount of CDR Rs.

1. Structural Engineering Division Equipment Rs.284300/-

a. Multimedia Projectors Rs.8000/-

b. Air Conditioners Rs.8000/-

2. Geotechnical and Transportation Engg Div Equipment Rs.30000/-

c. Multimedia Projectors Rs.8000/-

d. Air Conditioners Rs.8000/-

3. Survey Laboratory Rs.25200/-

e. Multimedia Projectors Rs.4000/-

f. Air Conditioners Rs.8000/-

4. Hydraulic &Irrigation Engineering Division

g. Multimedia Projectors Rs.8000/-

h. Air Conditioners Rs.12000/-

5. .Environmental Engineering Lab, Rs.228200/-

(b) the successful bidder will arrange two stamp paper @0.25% on total value of issuance

of Purchase Order.







15. Bidders must attach attested photocopy of their N.T.N. and G.S.T. Number, Professional

Tax Certificate.





process. The deducted amount as security will be returned after successful completion of

Defect Liability / Warranty Period, after repairing the defects in the equipment /


19. Deduction of Income Tax and other taxes of any kind will be deducted at the source according to Governments prevailing rules.




year.




entertained.




24. The Departmental/sub campus Inspection Committee, will get the equipment inspected

at UET Lahore Narowal Campus and will have the right to reject the equipment if not

found according to the stated specifications.

25. In case any supply / material is found not in conformity with the specifications provided

in the tender, either on account of inferior quality, defective workmanship, faulty design,

faulty packing or is short supplied, or wrongly supplied, the supplier shall replace the

same free of charges.

26. The bidders are required to submit the company profile including Technical, engineering,

managerial capabilities after sale service and past experience / performance along with

their technical bid and also list of reference installation in Pakistan for similar equipment.


Mr.Intezar Hussain

Head

Civil Engineering Department


0346 4801412

1. Structural Enginereing Divison

Item Specifications Qty

Estd.

Unit Cost

(million

PKR)

Estd.

Total Cost

(million

PKR)

Concrete Mixer

for High Strength

Concrete

Mixer Pan Capacity 130-150 liter. Yield

per mixture: 80- 90 L) along with vibrating

table 1200 mm x 600 mm, Countries of

Origin for mixer: USA, Canada, Europe

(Turkey excluded), Australia, New

Zealand, Japan, South Korea 1 1.500 1.500

One Point

Workability

Appratus

For performing slump test on concrete as

per ASTM C143/C143M-15a. Stainless

steel mould base 8 inch dia, top 4 inch and

height 12 inch. Accessories: metal base

with clamps, graduated temping rod,

measuring column, cone funnel and scoop.

5 0.120 0.600

Digital Weight

Balance Capacity

100 kg

100kg, platform type, Mains/Battery

operated. Countries of Origin: USA,

Canada, Europe (Turkey excluded),

Australia, New Zealand, Japan, South

Korea.

1 0.160 0.160

Cylindrical

Moulds 150 mm

Dia 300 mm

Height

150 mm internal Dia, 300 mm Height

20 0.050 1.000

Cylindrical

Moulds 100 mm

Dia 200 mm

Height

100 mm internal Dia, 200 mm Height

20 0.040 0.800

Moulds Cube 150

mm

150 mm each side, cast iron, 2 parts 20 0.050 1.000

Moulds Cube 100

mm

100 mm each side, cast iron, 2 parts 20 0.037 0.740

Apparatus to

prepare mortar

cubes

Conforming to ASTM C305 and ASTM

C451. Nominal Capacity of mixing bowl:

4.73 liters as ASTM C305, motor

power:124W minimum. Non-

programmable, non- automatic (manual).

The paddle must conform to ASTM C305.

EN paddle will not be accepted . 230 V,

50-60 Hz, 1 ph. Accessories: Second steel

filling hopper, Hard rubber scraper,

Reference sand: 5Kg Countries of Origin:

USA, Canada, Europe (Turkey excluded),


Korea.

1 0.900 0.900

Core Cutting

Appratus

Universal core drill machine Conforming

to ASTM C42, Accessories, Water

collecting ring, trolley, Coring bit for

50mm dia. x 400mm long cores with

attached head, Coring bit for 75mmdia x

400mm long core with attached head,

Coring bit for 100mmdia x 400mm long

core with attached head, Coring bit for

150mmdia x 400mm long core with

attached head, Core extractor. Power

supply: 230 V 1 ph 50/60Hz

Countries of Origin: USA, Canada, Europe


Zealand, Japan, South Korea.

1 1.800 1.800

Digital Rebound

Hammer

Conforming to ASTM C805/805M-13a..

Microprocessor operated, continuous

automatic recording of rebound number,

angle of strike. Capable of registering and

processing data and then transferring them

to a PC. Live display of results.

Accessories: Calibration anvil, USB cable

for data transfer, battery charger,abrasive

stone, PC software, carrying case

1 0.300 0.300



Zealand, Japan, South Korea

Ultrasonic Pulse

Velocity tester

Conforming to ASTM C597-16.

Microprocessor operated, Continuous

automatic recording of travel time, data

storage,processing and transferring to PC

via USB port. Measuring range: 0 - 3000 μs

- accuracy +/- 0.1 μs. Language: English.

Accessories: two 55kHz probes with

connection cables, calibrating cylinder, PC

software, USB cable for data transfer,

battery charger, contact past Countries of

Origin: USA, Canada, Europe (Turkey

excluded), Australia, New Zealand, Japan,

South Korea.

1 1.000 1.000

Moulds for Beams and Columns

For casting concrete specimens of

following sizes; 150 mm x 150 mm x 500

mm (3 No.), 100 mm x 100 mm x 10 0.06 0.600

350 mm (2 No.), 150 mm dia x 500 mm

length (1 No.),

100 mm x 150 mm x 1050 mm (4 No.)

Temprature

Controlled Oven

General purpose drying oven for laboratory

use. Forced Convection, Nominal capacity

400 liters, Max. temperature: 200°C




2 0.445 0.890

Minor Instruments

04 No. Vernier callipers (300 @ 0.05 mm),

04 No. screw gauge (25 mm @ 0.01 mm),

02 No. analogue dial gauges 25 mm x 0.01

mm, 02 No. digital dial gauges 25 mm x

0.01 mm 01 No. Le chatelier apparatus, 01

No.

1 2.925 2.925

Manual Vicat apparatus, 01 No.

Compacting factor apparatus, 01 No.

Digital Weighing balance 16Kg @ 0.1g ,

01 No. Bulk Density Apparatus (ASTM

C29), 01 No. Specific Gravity Apparatus

for coarse aggregates, 01 No. Pycnometer

Apparatus for specific gravity (ASTM

C128), 01 No. Aggregate Impact Value

apparatus (BS 812), 01 No. Unsymmetrical

bending apparatus, 01 No. Column

buckling apparatus, 01 No. Shear Center

apparatus, 01 No. Strain measuring

apparatus with strain gauges, a strain

rosette and mini built-in data logger (Not

Universal data logger)

Countries of origin for analogue and digital

dial gauges: USA, Canada, Europe (Turkey


South Korea.

Multimedia /

Smart Board

3 LCD Technology , 1024 X 768, Lumens

3300 or better, Contrast 1:15000, Lamp

Life 10000 Hours, Ports HDMI,USB,VGA,

Ciel Mount Kit 03 Cables Safty Box etc,

4 0.100 0.400

ACs for Labs of

Civil Engineering

Department

1.5 Ton inverter AC with both heating and

cooling option, Capacoty: 18000 BTU,

230V/single phase/50 Hz, Auto-voltage

adaptation: 150-260 V, referigerant: R410 4

0.100 0.400

or equivalent, with installation.

Total 15.015

2. Geo Technical Engineering Division


Estimated

Unit Cost

(million

PKR)

Estimated

Total Cost

(million

PKR)

Triaxial Test

System with

complete

accessories

Capacity: 50 kN, proving ring and dial

gauges based system, data logging not

required, capacble of saturating the sample

and performing CD,CU,UU triaxial tests.

All accessories

1 1.500 1.500

Country of origin: USA, Canada, Europe



Multimedia /

Smart Board 3 LCD Technology , 1024 X 768, Lumens



Ciel Mount Kit 03 Cables Safty Box etc

4 0.100 0.400

ACs for Labs of

Civil Engineering

Department




adaptation: 150-260 V, referigerant: R410


4 0.100 0.400

Total 2.300

3. Survey Lab.


Estimated

Unit Cost

(million

PKR)

Estimated

Total Cost

(million

PKR)

Digital Theodolite Magnification: 30x without EDM USA,

Canada, Europe (Turkey excluded),


3 0.200 0.600

Korea.

Alidade For plane tabling, brass-made 20 0.003 0.060

Minor Equipment

04 No.Thermometers 0-100 Deg C @ 0.1

deg C, 16 No. Trestle wooden, 02 No.

Spring Balance, 02 No. Prismatic Compass,

12 No. Steel Ranging Rods G.I pipes, 12

No. Steel Ranging poles, 04 No. Spirit

level for plane tabeling, 02 No. Steel tape

100m length, 40 No. Wooden pegs, 40 No.

steel pegs, 04 No. steel hammer

1 0.600 0.600

Multimedia /

Smart Board





2 0.100 0.200

ACs for Labs of

Civil Engineering

Department






4 0.100 0.400

Total 1.860

4.Hydraulics &

Irrigation

Engineering

Division.


Estimated

Unit Cost

(million

PKR)

Estimated

Total Cost

(million

PKR)

Multimedia /

Smart Board





4 0.100 0.400

ACs for Labs of

Civil Engineering

Department






6 0.100 0.600

Total

RS.1.00

5.Environmental

Engineering Lab


Estimated

Unit Cost

(million

PKR)

Estimated

Total Cost

(million

PKR)

Standard test jar

apparatus

6 jar apparatus @ mixing 1-150 rpm, tubes

in the bottom 1 0.500 0.500

platform: preferably programmable

Chemical oxygen

demand apparatus

Standard COD apparatus with calibration

fluids Country of origin: USA, Canada,

Europe (Turkey excluded), Australia, New


1 0.677 0.677

Dissolved oxygen

meter

Standard DO apparatus with calibration

fluids Country of origin: USA, Canada,

Europe (Turkey 1 0.250 0.250


South Korea.

Reverse osmosis

apparatus

500 lit/hr meeting WHO drinking water

standards at the least; hydraunautics or

equivalent 1 2.000 2.000




Biochemical

oxygen demand

equipment

Standard BOD apparatus with calibration

fluids, with 30 BOD bottles 1 1.500 1.500




Sound level meter

Noise meter with filters

1 0.500 0.500 Country of origin: USA, Canada, Europe



Monopan Balance

0-50 g , electronic




Magnetic stirrer

Magnetic stirrer with hot plate; 3 inches

magnets with teflon cover, 05 in number 1 1.000 1.000




Refrigerator 14 cft 1 0.050 0.050

Oven with Digital

Controller

50 litres, forced convection, up to 180 deg

C Country of origin: USA, Canada, Europe

(Turkey 1 0.200 0.200


South Korea.

PH meter 0-14 range with pH 4, 7 and 10 calibration

standards Country of origin: USA, Canada,

Europe (Turkey excluded), Australia, New


1 0.150 0.150

TDS meter

Desktop, 0 to 5000 ppm




Spectrophotometer

For mineral concentration determination




Distillation

apparatus.

To produce distilled water




Imhoff Cone

Standard Imhoff Cone




Muffle Furnace

1100 deg C max temp, effective cap. 28 lit,,

with temperature control




Onsite pH meter

Field-scale pH meter




Total 11.410



OF

For the Supply of Books and Journals


1. Single stage/one envelope bidding procedure shall be applied in response. The envelop

shall be marked FINANCIAL PROPSAL”.

2. Responding organizations shall deliver sealed proposal of the FINANCIAL PROPOSALS” before or on 15th June, 2020 at 9:30 a.m.

3. The Proposals will not be accepted after the due date &, time proposal shall be delivered

at the address given below before time. The FINANCIAL PROPOSALS” shall be opened

on the same day at 10:00 a.m. in the presence of bidders or the representatives of the

responding organizations.



6. The prices, including all taxes, should be quoted Book wise in Pakistani Rupees so as to

reach the premises of the University of Engineering &Technology Lahore Narowal

Campus.


8. a. Delivery period Should not exceed 8 weeks from the date of placement of order.



which will be deducted from his payment. The relaxation in the delivery time will

not be provided more than 4 weeks after the expiry of delivery time of 8 weeks.

9. Bidders must submit their tender duly signed, clearly indicating the offered specifications

of each Book, specified in the Tender Document.

10. Offers must be supported with comprehensive sectioned literary of the materials / good

offered.

11. The University reserves the right, at the time of placing the order, to increase or decrease

the quantity of books.

12. (a) Bids must be accompanied by 2% of total estimated cost as Earnest Money in the shape



13. Estimated costs is Rs. 4.30 Million Amount of CDR is Rs.86000/-.

14. (b) the successful bidder will arrange two stamp paper @0.25% on total value of issuance

of Purchase Order.






16.

17. The books must be in accordance with the offered list.

18. Bidders must attach attested photocopy of their N.T.N. and G.S.T. Number, Professional

Tax Certificate.

19. The successful bidder(s) shall get the books inspected at UET Lahore Narowal Campus.




22. Sale price of the tender document is Rs.1000/- (Non-Refundable) .The details books is

given in the subsequent pages.




entertained.




25. The Departmental/Sub Campus Inspection Committee, will get the books inspected at

UET Lahore Narowal Campus and will have the right to reject the books if not found

according to the stated specifications.

26. In case any supply / material is found not in conformity with the list provided in the

tender, either on account of inferior quality, defective workmanship, faulty design, faulty

packing or is short supplied, or wrongly supplied, the supplier shall replace the same free

of charges.


Mr.Intezar Hussain

Head

Library Narowal Campus

0346 4801412

Biomedical Engineering

Sr No. author book title

1 DOMACH INTRODUCTION TO BIOMEDICAL ENGINEERING 2ND ED

2 BUSHONG RADIOLOGIC SCIENCE FOR TECHNOLOGISTS PHYSICS, BIOLOGY, AND PROTECTION 11TH ED

3 ETHIER INTRODUCTORY BIOMECHANICS FROM CELLS TO ORGANISMS

4 PEREZ DESIGN OF MEDICAL ELECTRONIC DEVICES

5 LANCASTER FUNDAMENTAL MATHEMATICS AND PHYSICS OF MEDICAL IMAGING

6 PATTON ANTHONY'S TEXTBOOK OF ANATOMY & PHYSIOLOGY WITH ONLINE ACCESS 21ST ED

7 NG PROBLEMS AND SOLUTIONS IN MEDICAL PHYSICS DIAGNOSTIC IMAGING PHYSICS

8 CHAPPELL PRINCIPLES OF MEDICAL IMAGING FOR ENGINEERS FROM SIGNALS TO IMAGES

9 MARTIN AN INTRODUCTION TO RADIATION PROTECTION 7TH ED

10 PALSSON TISSUE ENGINEERING.

11 GERALD APPLIED NUMERICAL ANALYSIS 7TH ED

12 JOHNSON INTRODUCTION TO HEALTH PHYSICS 5TH ED

13 CARR INTRODUCTION TO BIOMEDICAL EQUIPMENT TECHNOLOGY 4TH ED

14 PARK BIOMATERIALS AN INTRODUCTION 3RD ED.

15 PAL NUMERICAL ANALYSS FOR SCIENTISTS AND ENGINEERS THEORY AND C PROGRAMS

16 IWASA KARP'S CELL BIOLOGY GLOBAL ED

17 BRAHMACHARI NATURAL BIOACTIVE MOLECULES IMPACTS AND PROSPECTS

18 SHEN DIAGNOSTIC MOLECULAR BIOLOGY

19 TIGHE INSTRUMENTATION FOR THE OPERATING ROOM A PHOTOGRAPHIC MANUAL WITH ONLINE ACCESS 9TH ED

20 THERAJA BASIC ELECTRONICS SOLID STATE MULTICOLOUR ILLUSTRATIVE EDITION

21 LAM BIOMEDICAL DEVICES MATERIALS, DESIGN, AND MANUFACTURING

22 MCKINLEY ANATOMY & PHYSIOLOGY 3RD ED

23 BREY THE INTEL MICROPROCESSORS ARCHITECTURE, PROGRAMMING, AND INTERFACING 8TH ED

24 GROOVER AUTOMATION, PRODUCTION SYSTEMS, AND COMPUTER-INTEGRATED MANUFACTURING 4TH ED

25 LANGTON ESSENTIAL GUIDE TO READING BIOMEDICAL PAPERS

26 BROWN EXTREME TISSUE ENGINEERING CONCEPTS AND STRATEGIES FOR TISSUE FABRICATION

27 NISKER THE 'HEALTHY' EMBRYO: SOCIAL, BIOMEDICAL, LEGAL AND PHILOSOPHICAL PERSPECTIVES

28 DISEGI COBALT-BASE ALLOYS FOR BIOMEDICAL APPLICATIONS

29 CARR INTRODUCTION TO BIOMEDICAL EQUIPMENT TECHNOLOGY 4TH EDI

30 DESISTO INSTRUMENTED IMPACT TESTING

31 SHULER BIOPROCESS ENGINEERING BASIC CONCEPTS 2ND EDI

32 MALLEY STATISTICAL LEARNING FOR BIOMEDICAL DATA

33 ENDERLE ADVANCED PROBABILITY THEORY FOR BIOMEDICAL ENGINEERS

34 CARR INTRODUCTION TO BIOMEDICAL EQUIPMENT TECHNOLOGY 4TH EDI

35 FURBER ARM SYSTEM ON CHIP ARCHITECTURE

36 BRONZINO THE BIOMEDICAL ENGINEERING HANDBOOK BIOMEDICAL ENGINEERING FUNDAMENTALS 4/E 4 VOL SET (HB)

37 BHAT BIOMATERIALS 3/E (PB)

38 KUMAR BIO MEDICAL SIGNAL PROCESSING (PB)

39 ZENG IMAGE RECONSTRUCTION APPLICATIONS IN MEDICAL SCIENCE (PB)

40 PEASE BIOMEDICAL KNOWLEDGE MANAGEMENT: INFRASTRUCTURES AND PROCESSES FOR E-HEALTH SYSTEMS ( HB )

41 WAITE BIOFLUID MECHANICS IN CARDIOVASCULAR SYSTEMS (HB)

42 SAMANI AN INTRODUCTION TO SIGNAL PROCESSING FOR NON ENGINEERS (HB)

43 HEMANTH INTELLIGENT DATA ANALYSIS FOR BIOMEDICAL APPLICATIONS CHALLENGES AND SOLUTIONS (PB)

44 FENG BIOMEDICAL INFORMATION TECHNOLOGY 2/E (PB)

45 AKAY WILEY ENCYCLOPEDIA OF BIOMEDICAL ENGINEERING 6 VOL SET (HB)

CIVIL ENGINEERING

46 GOPI ADVANCED SURVEYING TOTAL STATION, GPS, GIS AND REMOTE SENSING 2ND ED

47 UPADHYAY CIVIL ESTIMATING & COSTING (INCLUDING QUANTITY SURVEYING, TENDERING AND VALUATION)

48 ALLEN EXERCISES IN BUILDING CONSTRUCTION 7TH ED

49 NILSON DESIGN OF CONCRETE STRUCTURES 15TH ED.

50 SONI CONSTRUCTION MANAGEMENT AND EQUIPMENT

51 GHILANI ELEMENTARY SURVEYING AN INTRODUCTION TO GEOMATICS 13TH ED

52 DAS PRINCIPLES OF FOUNDATION ENGINEERING 8TH ED

53 HOLTZ AN INTRODUCTION TO GEOTECHNICAL ENGINEERING 2ND ED

54 SAGAR CONSTRUCTION TECHNOLOGY AND MANAGEMENT CONSTRUCTION MACHINERY & WORKS MANAGEMENT

55 DOREN AIR POLLUTION

56 PRASAD AIR POLLUTION AND IT'S IMPACTS ON PLANT GROWTH

57 SOMVANSHI AN INTRODUCTION TO REMOTE SENSING AND ITS APPLICATIONS

58 REVELLE CIVIL AND ENVIRONMENTAL SYSTEMS ENGINEERING 2ND ED

59 KUMAR DISASTER MANAGEMENT

60 DHAWAN DISASTER MANAGEMENT AND PREPAREDNESS

61 KUMAR ENVIRONMENTAL AIR ANALYSIS

62 NGOZI ENVIRONMENTAL ECOLOGY

63 PEAVY ENVIRONMENTAL ENGINEERING

64 PANDEY ENVIRONMENTAL ENGINEERING (INDIAN PRINT)

65 CHITKARA ENVIRONMENTAL IMPACT ASSESSMENT

66 BARTHWAL ENVIRONMENTAL IMPACT ASSESSMENT 2ND ED

67 ECCLESTON ENVIRONMENTAL IMPACT ASSESSMENT A GUIDE TO BEST PROFESSIONAL PRACTICES.

68 RAO ENVIRONMENTAL POLLUTION CONTROL ENGINEERING 3RD ED

69 VERMA ENVIRONMENTAL STUDIES AND DISASTER MANAGEMENT

70 TABIN GLOBAL WARMING THE EFFECTS OF "OZONE" DEPLETION

71 SHARMA HOSPITAL WASTE MANAGEMENT AND ITS MONITORING 2ND ED

72 BASU SOIL EROSION AND ENVIRONMENTAL PROBLEMS

73 CHERRY SOLID AND HAZARDOUS WASTE MANAGEMENT

74 ALLEN SUSTAINABLE ENGINEERING CONCEPTS, DESIGN AND CASE STUDIES

75 BHATIA TEXTBOOK OF NOISE POLLUTION AND ITS CONTROL

76 BURTON THE ENVIRONMENT AS HAZARD 2ND ED

77 HOEKSTRA THE WATER POOTPRINT OF MODERN CONCUMER SOCITY 2ND ED

78 METCALF WASTEWATER ENGINEERING TREATMENT AND REUSE 4TH ED

79 VARSHNEY WATER POLLUTION AND MANAGEMENT 2ND ED

80 AGARWAL WEALTH FROM WASTE

81 GHILANI ELEMENTARY SURVEYING AN INTRODUCTION TO GEOMATICS 13/E (PB)

82 VIESSMAN WATER SUPPLY AND POLLUTION CONTROL 8/E (PB)

83 ROY FUNDAMENTALS OF STRUCTURAL ANALYSIS WITH COMPUTER ANALYSIS AND APPLICATION 2/E (PB)

84 KHAN HYDRAULICS AND HYDRAULIC MACHINES (PB)

85 CHUDLEY CONSTRUCTION TECHNOLOGY VOL IV 2/E (PB)

86 CHUDLEY CONSTRUCTION TECHNOLOGY VOL II 2/E (PB)

87 CHUDLEY CONSTRUCTION TECHNOLOGY VOL I 2/E (PB)

88 CHUDLEY CONSTRUCTION TECHNOLOGY VOL III 2/E (PB)

89 KUMAR ENGINEERING FLUID MECHANICS (PB)

90 RAIKAR LABORATORY MANUAL HYDRAULICS AND HYDRAULIC MACHINES (PB)

91 HASAN CIVIL ENGINEERING AND THEIR TESTING (PB)

92 BHATTACHARJEE CONCRETE STRUCTURES REPAIR REHABILITATION AND RETROFITTING (PB)

93 PATRA HYDROLOGY AND WATER RESOURCES ENGINEERING 2/E (PB)

94 NEVILLE CONCRETE TECHNOLOGY

95 HUNT BUILDING AIR CHANGE RATE AND INFILTRATION MEASURMENTS

96 DRNEVICH ACOUSTIC EMISSIONS OF GEOTECHNICAL ENGINEERING PRACTICE

97 BARRAS BUILDING CYCLES GROWTH & INSTABILITY

98 WYMAN YOUTH CULTURE, LANGUAGE ENDANGERMENT AND LINGUISTIC SURVIVANCE

99 MCGHEE WATER SUPPLY AND SEWRAGE 6TH ED

100 HOOPER COMPOSITE MATERIALS TESTING AND DESIGN

101 WOLF Durability of Building and Construction Sealants and Adhesives

102 SOMYAJI CIVIL ENGINEERING MAATERIALS

103 Hinz consruction planning and schudling

104 LAMOND Significace of Tests and Properties of CONCRETE & CONRETE-Making materials

105 PAL ENGINEERING DRAWING 6/ED

106 MCKAY W B BUILDING CONSTRUCTION VOL-2: METRIC 4TH/ED (LPE)



109 MCKAY J K BASIC SOIL MECHANICS AND FOUNDATIONS (IND/ED)

110 MEYER J HYDROLOGY AND FLOODPLAIN ANALYSIS 5TH/ED (IE)

111 GUPTA V P BUILDING REPAIR AND MAINTENANCE MANAGEMENT (IND/ED)

112 GAHLOT P S BARRY'S ADVANCED CONSTRUCTION OF BUILDINGS 4TH/ED

113 JINDAL U S DESIGN OF UNDERGROUND STRUCTURES

114 GUI Z D PLANNING KNOWLEDGE AND RESEARCH

115 FALKOVICH G AN INTRODUCTION TO STRUCTURAL MECHANICS FOR ARCHITECTS

116 HUSIAN S K DESIGN OF MODERN STEEL BRIDGES 2ND/ED

117 JAMES W P CIVIL ENGINEERING MATERIALS (IND/ED)

118 SIVAKUGAN N BUILDER'S GUIDE TO BARRIERS: DOORS, WINDOWS, AND TRIM

119 RAMSEY D SUSTAINABILITY ISSUES IN CIVIL ENGINEERING

120 HARRIS A FUNDAMENTALS OF STRUCTURAL MECHANICS (IND/ED)

121 GAHLOT P S CONCRETE STRUCTURES 2ND/ED

122 SETAREH M FUNDAMENTALS OF STRUCTURAL ENGINEERING 2ND/ED

123 JAIN FUNDAMENTALS OF PHYSICAL GEOLOGY

124 BILLINGS STRUCTURAL GEOLOGY 3RD EDI

125 SOMAYAJI CIVIL ENGINEERING MATERIALS 2ND EDI

126 ASTM 2011 ASTM STANDARDS WATER AND ENVIRONMENTAL TECHNOLOGY VOL 11.02

127 DRNEVICH ACOUSTIC EMISSIONS OF GEOTECHNICAL ENGINEERING PRACTICE

128 SCHRIEVER FULL-SCALE LOAD TESTING OF STRUCTURES

129 HOTALING EXTENDING AGGREGATE RESOURCES

130 JOHNSON WATER FOR SUBSURFACE INJECTION PROCEEDINGS OF THE SECOND SYMPOSIUM

131 SCHULZE OIL SPILL RESPONSE PERFORMANCE REVIEW OF SKIMMERS

132 RANAGANATH FATIGUE TESTING AND ANALYSIS UNDER VARIABLE AMPLTUDE LOADING CONDITIONS

133 ANDERSON TECHONOLOGY TRANSFER

134 WALKER THE HANDBOOK OF DESIGN FOR SUSTANIBILITY

135 ALLEN FUNDAMENTALS OF BULDING CONSTRUCTION MATERIALS & METHODS

computer science

136 HALSALL MULTIMEDIA COMMUNICATIONS APPLICATIONS, NETWORKS, PROTOCOLS AND STANDARDS

137 VERMAAT DISCOVERING COMPUTERS 2016 TOOLS, APPS, DEVICES, AND THE IMPACT OF TECHNOLOGY

138 KROENKE USING MIS 10TH ED

139 STALLINGS DATA AND COMPUTER COMMUNICATIONS 10TH ED.

140 MCCONNELL CODE COMPLETE A PRACTICAL HANDBOOK OF SOFTWARE CONSTRUCTION 2ND ED

141 MILLER SOFTWARE TESTING

142 KHURANA CLOUD COMPUTING SAAS, PAAS, LAAS, VIRTUALIZATION, BUSINESS MODELS, MOB ILE, SECURITY, AND MORE

143 JAMSA HUMAN-COMPUTER INTERACTION 3RD ED

144 DIX ASSEMBLY LANGUAGE FOR X86 PROCESSORS 7TH ED.

145 IRVINE SOFTWARE QUALITY ASSURANCE IN LARGE SCALE AND COMPLEX SOFTWARE INTENSIVE SYSTEMS

146 SINGH PYTHON GUI PROGRAMMING COOKBOOK 2ND ED

147 VENKATESH INTETNET OF THINGS (IOT) SYSTEMS AND APPLICATIONS

148 FORSYTH THE BASICS OF HACKING AND PENETRATION TESTING 2ND ED

149 SHNEIDERMAN INTRODUCTION TO THE DESIGN AND ANALYSIS OF ALGORITHMS 3RD ED

150 LEVITIN COMPUTER SYSTEM ARCHITECTURE REVISED 3RD ED

151 SOMMERVILLE OPERATING SYSTEMS INTERNALS AND DESIGN PRINCIPLES ONLINE ACCESS 9TH ED

152 TANENBAUM JAVA SOFTWARE SOLUTIONS 9TH ED

153 KAUSHIK COMPUTER NETWORKS AND INTERNETS 6TH ED

154 COMER DATA INFRASTRUCTURE MANAGEMENT INSIGHTS AND STRATEGIES

155 PERKINS ADVANCED IMAGE AND VIDEO PROCESSING USING MATLAB

156 KLEINBERG AN INTRODUCTION TO DATABASE SYSTEMS 8TH ED

157 DATE AN INTRODUCTION TO NUMERICAL COMPUTATION 2ND ED

158 BHATT ANDROID 6 FOR PROGRAMMARS AN APP-DRIVEN APPROACH 3RD ED.

159 KAUSHIK ARTIFICIAL INTELLIGENCE BY EXAMPLE

160 PANDEY BEGINNERS GUIDE TO BIOINFORMATICS FOR HIGH THROUGHPUT SEQUENCING

161 ERI BIG DATA VISUALIZATION

162 BAXEVANIS BLOCKCHAIN FOR DUMMIES

163 LAURENCE BUILDING BLOCKCHAIN PROJECTS

164 VELTE CLOUD COMPUTING A PRACTICAL APPROACH FOR LEARNING AND IMPLEMENTATION

165 ERL CLOUD COMPUTING WEB-BASED APPLICATIONS THAT CHANGE THE WAY YOU WORK AND COLLABORATE ONLINE

166 MILLER COMPILER CONSTRUCTION

167 SUNITHA COMPILER DESIGN IN C.

168 HOLUB COMPILERS PRINCIPLES, TECHNIQUES AND TOOLS 2ND ED

169 AHO COMPUTER & MACHINE VISION THEORY ALGORITHMS PRACTICALITIES 4TH ED

170 DAVIES COMPUTER ALGORITHMS INTRODUCTION TO DESIGN & ANALYSIS 3RD ED

171 BAASE COMPUTER FUNDAMENTALS

172 GOEL COMPUTER GRAPHICS PRINCIPLES AND PRACTICE 3RD ED.

173 KUROSE COMPUTER NETWORKING AND THE INTERNET 5TH ED

174 HALSALL COMPUTER NETWORKS 5TH ED

175 PETERSON COMPUTER ORGANIZATION AND ARCHITECTURE DESIGNING FOR PERFORMANCE 10TH ED

176 STALLINGS COMPUTER SCIENCE A STRUCTURED PROGRAMMING APPROACH USING C 3RD ED

177 MANO COMPUTER SYSTEM ARCHITECTURE REVISED 3RD ED

178 MANO COMPUTER VISION A MODERN APPROACH 2ND ED.

179 MENEZES CYBERCRIME LAW ENFORCEMENT, SECURITY AND SURVEILLANCE IN THE INFORMATION AGE

180 STALLINGS DATA COMMUNICATIONS AND NETWORKING 5TH ED

181 FOROUZAN DATA SCIENCE AND MACHINE LEARNING MATHEMATICAL AND STATISTICAL METHODS

182 WEISS DATA STRUCTURES AND ALGORITHMS

183 AHO DATA STRUCTURES USING C

184 TENENBAUM DATABASE MANAGEMENT SYSTEMS 3RD ED

185 RAMAKRISHNAN DATABASE PRINCIPLES FUNDAMENTALS OF DESIGN, IMPLEMENTATION, AND MANAGEMENT 10TH ED

186 CORONEL DATABASE PROCESSING FUNDAMENTALS, DESIGN, AND IMPLEMENTATION 13TH ED

187 KROENKE DATABASE SYSTEMS FOR ADVANCED APPLICATIONS PART 1

188 SHAH DEEP LEARNING FOR COMPUTER VISION

189 CASTLEMAN DISCOVERING COMPUTERS 2016 TOOLS, APPS, DEVICES, AND THE IMPACT OF TECHNOLOGY

190 LIU DISTRIBUTED DATABASE SYSTEMS

191 COULOURIS DISTRIBUTED SYSTEMS PRINCIPLES AND PARADIGMS 2ND ED.

192 TANENBAUM ELEMENTS OF DISCRETE MATHEMATICS A COMPUTER ORIENTED APPROACH 4TH ED

193 LIU ENGINEERING PROBLEM SOLVING WITH C 3RD ED

194 ETTER EXTREME PROGRAMMING EXPLAINED EMBRACE CHANGE 2ND ED

195 FOLK FORMAL SOFTWARE DEVELOPMENT FROM VDM TO JAVA

196 ELMASRI FUNDAMENTALS OF GAME DESIGN 3RD ED WITH ONLINE ACCESS

197 ADAMS FUNDAMENTALS OF INFORMATION SYSTEMS 8TH ED

198 NELSON HANDS-ON MACHINE LEARNING WITH R

199 DIX IMAGE ANALYSIS AND RECOGNITION PART 2

200 BUTTCHER INFORMATION SYSTEMS FOUNDATION OF E-BUSINESS 4TH ED

201 ALTER INFORMATION TECHNOLOGY FOR MANAGEMENT 7TH ED

202 DIETEL INTRODUCING THE THEORY OF COMPUTATION (INDIA EDITION)

203 GODDARD INTRODUCTION TO ALGORITHMS 3RD ED

204 TRAPPE INTRODUCTION TO DATA MINING

205 TAN INTRODUCTION TO ROBOTICS MECHANICS AND CONTROL 3RD ED

206 CRAIG INTRODUCTION TO THE DESIGN & ANALYSIS OF ALGORITHMS 2ND ED

207 SIPSER JAVA 9 FOR PROGRAMMERS

208 SCHILDT LEARN PYTHON IN 7 DAYS

209 RAJ MASTERING PYTHON DATA ANALYSIS

210 BATHUL METRICS AND MODELS IN SOFTWARE QUALITY ENGINEERING 2ND ED WITH ONLINE ACCESS

211 KAN MODERN DATABASE MANAGEMENT 12TH ED

212 HOFFER MODERN JAVASCRIPT DEVELOP AND DESIGN

213 ULLMAN MULTIMEDIA SYSTEMS

214 BUFORD MULTIMEDIA: MAKING IT WORK 9TH ED

215 MURRAY MYSQL 5TH ED

216 DUBIOS NATURAL LANGUAGE UNDERSTANDING 2ND ED.

217 ALLEN NEXT-GENERATION INTERNET ARCHITECTURES AND PROTOCOLS

218 LAFORE OPERATING SYSTEMS INTERNALS AND DESIGN PRINCIPLES ONLINE ACCESS 9TH ED

219 STALLINGS ORACLE DATABASE 11G NEW FEATURES

220 FREEMAN OXFORD DICTIONARY OF COMPUTER SCIENCE

221 OXFORD PRACTICAL INTERNET OF THINGS SECURITY 2ND ED

222 TAPP PRINCIPLES OF MULTIMEDIA 2ND ED

223 PAREKH PROBLEM SOLVING AND PROGRAMMING CONCEPTS 9TH ED

224 SPRANKLE PROGRAMMING THE SEMANTIC WEB

225 EAGLE REAL-TIME EMBEDDED SYSTEMS

226 FELLEISEN SOFTWARE ARCHITECTURE DESIGN PATTERNS IN JAVA

227 BASS SOFTWARE ENGINEERING 10TH ED

228 SOMMERVILLE SOFTWARE ENGINEERING A PRACTITIONER'S APPROACH 7TH ED

229 PRESSMAN SOFTWARE ENGINEERING A PRACTITIONER'S APPROACH 8TH ED

230 PFLEEGER SOFTWARE TECHNOLOGIES

231 PEARLSON STRATEGIC MANAGEMENT OF INFORMATION SYSTEMS 4TH ED

232 TANENBAUM SUCCEEDING WITH AGILE SOFTWARE DEVELOPMENT USING SCRUM

233 COHN SYSTEMS ANALYSIS AND DESIGN METHODS 7TH ED

234 WHITTEN TECHNICAL APTITUDE FOR INTERVIEWS 2ND ED

235 SHARMA TEXT MINING CONCEPTS, IMPLEMENTATION, AND BIG DATA CHALLENGE

236 PETERSEN THE COMPLETE REFERENCE UNIX 2ND ED

237 ROSEN THE DESIGN AND ANALYSIS OF COMPUTER ALGORITHMS

238 AHO THE INTERNET AND ITS PROTOCOLS A COMPARATIVE APPROACH

239 FARREL THE MINIX BOOK OPERATING SYSTEMS DESIGN AND IMPLEMENTATION 3RD ED. WITH CD

240 TANENBAUM THE UNIFIED MODELING LANGUAGE USER GUIDE COVERS UML 2.0 2ND ED

241 BOOCH THEORY OF AUTOMATA, FORMAL LANGUAGES AND COMPUTATION.

242 XAVIER TOP-DOWN NETWORK DESIGN 3RD ED

243 OPPENHEIMER UNIX NETWORK PROGRAMMING INTERPROCESS COMMUNICATIONS VOL-2 2ND ED

244 STEVENS A FIRST COURSE IN DATABASE SYSTEMS 3RD ED

245 ULLMAN A HANDBOOK OF INFORMATION TECHNOLOGY

246 KANDAR BIG DATA FUNDAMENTALS CONCEPTS, DRIVERS & TECHNIQUES

247 ERI BIG SCIENTIFIC DATA MANAGEMENT

248 BAXEVANIS BIOINFORMATICS VOL II STRUCTURE, FUNCTION, AND APPLICATION 2ND ED

249 GOEL CONCEPTS OF PROGRAMMING LANGUAGES 10TH ED

250 TANENBAUM ETHICS IN INFORMATION TECHNOLOGY 6TH ED

251 SHARMA FOUNDATIONS OF MODERN NETWORKING SDN, NFV, QOE, IOT, AND CLOUD

252 STALLINGS FOUNDATIONS OF SOFTWARE TESTING WITH ONLINE ACCESS 2ND ED

253 MATHUR FUNDAMENTALS OF DATABASE SYSTEMS 7TH ED

254 ADAMS FUNDAMENTALS OF INFORMATION SYSTEMS 8TH ED

255 HUDSON HUMAN-COMPUTER INTERACTION 3RD ED

256 DIX INFORMATION RETRIEVAL IMPLEMENTING AND EVALUATING SEARCH ENGINES

257 STAIR INTELLIGENCE ANALYSIS FUNDAMENTALS

258 DIETEL INTERNET OF THINGS

259 VASUDEVAN INTERNET OF THINGS ONLINE ACCESS

260 SRINIVASA INTERNETWORKING WITH TCP/IP VOL I PRINCIPLES, PROTOCOLS, AND ARCHITECTURE 6TH ED

261 COMER INTETNET OF THINGS (IOT) SYSTEMS AND APPLICATIONS

262 ATTWOOD INTRODUCTION TO DATA MINING

263 TAN INTRODUCTION TO DATABASE MANAGEMENT SYSTEMS

264 KAHATE INTRODUCTION TO INFORMATION SYSTEMS PEOPLE, TEHNOLOGY AND PROCESSES 3RD ED

265 WALLACE INTRODUCTION TO ROBOTICS MECHANICS AND CONTROL 3RD ED

266 CRAIG JAVA SOFTWARE SOLUTIONS 9TH ED

267 LEWIS LANGUAGES AND MACHINES AN INTRODUCTION TO THE THEORY OF COMPUTER SCIENCE 3RD ED

268 MANO MACHINE LEARNING DUMMIES (IN PYTHON AND R)

269 MUELLER MASTERING MATLAB 7

270 HANSELMAN MASTERING MODERN LINUX 2ND ED

271 BATHUL MATLAB FOR ENGINEERING APPLICATIONS 4TH ED

272 WINSTON MICROSOFT PROJECT 2010 INSIDE OUT

273 STOVER MODERN JAVASCRIPT DEVELOP AND DESIGN

274 ULLMAN MODERN OPERATING SYSTEMS WITH ONLINE ACCESS 4TH ED

275 HALSALL MULTIMEDIA SYSTEMS

276 DUBIOS NEW ADVANCES IN THE INTERNET OF THINGS

277 BASU PARALLEL AND DISTRIBUTED COMPUTING, APPLICATIONS, AND TECHNOLOGIES

278 PAUL SOFTWARE ARCHITECTURE DESIGN PATTERNS IN JAVA

279 BASS SOFTWARE ARCHITECTURE PERSPECTIVES ON AN EMERGING DESCIPLINE

280 SHAW SOFTWARE PROJECT MANAGEMENT IN A CHANGING WORLD

281 KENDALL THE 8088 AND 8086 MICROPROCESSORS PROGRAMMING, INTERFACING,SOFTWARE,HARDWARE,AND HARDWARE APPLICATIONS 4TH ED

282 ROSEN THE COMPLETE REFERENCE UPGRADING & TROUBLESHOOTING NETWORKS

283 KERNIGHAN THEORY OF AUTOMATA, FORMAL LANGUAGES AND COMPUTATION.

284 PRASAD VIRTUAL REALITY TECHNOLOGY 2ND ED

285 BURDEA WEB COMMERCE TECHNOLOGY HANDBOOK

286 MINOLI WEB DESIGN PRINCIPLES 5TH ED

287 SKLAR WEB ENGINEERING

288 KAHATE INTRODUCTION TO DATABASE MANAGEMENT SYSTEMS (PB)

289 COVER ELEMENTS OF INFORMATION THEORY 2/E (PB)

290 CADENHEAD SAMS TEACH YOURSELF JAVA IN 21 DAYS 6/E (PB)

291 ROZANSKI SOFTWARE SYSTEMS ARCHITECTURE 2/E (PB)

292 COMER INTERNETWORKING WITH TCP/IP VOL II DESIGN IMPLEMENTATION VOL 2 AND INTERNALS (ANSIC C VERSION) 3/E (PB)

293 ECKEL THINKING IN C++ VOL 1 INTRODUCTION TO STANDARD C++ 2/E + CD (PB)

294 HOPCROFT INTRODUCTION TO AUTOMATA THEORY, LANGUAGES, AND COMPUTATION 3/E (PB)

295 COMER INTERNETWORKING WITH TCP/IP VOL-I PRINCIPLES PROTOCOLS AND ARCHITECTURE 6/E (PB)

296 HIMANSHU DESIGN AND ANALYSIS OF ALGORITHMS (PB)

297 YATES MODERN INFORMATION RETRIEVAL (PB)

298 WEISS DATA STRUCTURES AND ALGORITHM ANALYSIS IN C++ 3/E (PB)

299 LAMBERT MICROSOFT POWERPOINT 2016 STEP BY STEP (PB)

300 DAVE DESIGN AND ANALYSIS OF ALGORITHMS 2/E (PB)

301 PETERSON COMPUTER NETWORKS A SYSTEMS APPROACH 5/E (PB)

302 ROYCE SOFTWARE PROJECT MANAGEMENT A UNIFIED FRAMEWORK (PB)

303 HALL CORE WEB PROGRAMMING 2/E (PB)

304 LIU REAL-TIME SYSTEMS (PB)

305 COMER COMPUTER NETWORKS AND INTERNETS 6/E (PB)

306 MANO COMPUTER SYSTEM ARCHITECTURE REVISED 3/E (PB)

307 SCHMELZER XML AND WEB SERVICES (PB)

308 ULLMAN PHP AND MYSQL FOR DYNAMIC WEB SITES 4/E (PB)

309 SEBESTA CONCEPTS OF PROGRAMMING LANGUAGES 10/E (PB)

310 GODBOLE SOFTWARE QUALITY ASSURANCE PRINCIPLES AND PRACTICES FOR THE NEW PARADIGM 2/E (PB)

311 WALPOLE PROBABILITY AND STATISTICS FOR ENGINEERS AND SCIENTISTS 9/E (PB)

312 STALLINGS OPERATING SYSTEMS INTERNALS AND DESIGN PRINCIPLES 9/E (PB)

313 ROY INTRODUCTION TO SOFT COMPUTING NEURO-FUZZY AND GENETIC ALGORITHMS (PB)

314 PFLEEGER SOFTWARE ENGINEERING THEORY AND PRACTICE 4/E (PB)

315 PRASAD AN INTRODUCTION TO NUMERICAL ANALYSIS 3/E (PB)

316 CRAIG INTRODUCTION TO ROBOTICS MECHANICS AND CONTROL 3/E (PB)

317 MITRA DATA MINING MULTIMEDIA,SOFT COMPUTING & BIOINFORMATICS (PB)

318 DUNHAM DATA MINING:INTRODUCTORY AND ADVANCED TOPICS (PB)

319 VASUDEVAN SOFTWARE PROJECT MANAGEMENT (PB)

320 SHARMA FUNDAMENTALS OF WEB TECHNOLOGY (PB)

321 SUNITHA COMPILER CONSTRUCTION (PB)

322 ELMASRI DATABASE SYSTEMS MODELS, LANGUAGES, DESIGN AND APPLICATION PROGRAMMING (PB)

323 HAYKIN NEURAL NETWORKS AND LEARNING MACHINES 3/E (PB)

324 DEITEL ANDROID 6 FOR PROGRAMMERS AN APP-DRIVEN APPROACH 3/E (PB)

325 GAUTHAM BIOINFORMATICS DATABASES AND ALGORITHMS (PB)

326 STALLINGS HIGH SPEED NETWORKS AND INTERNETS PERFORMANCE AND QUALITY OF SERVICE 2/E (PB)

327 LIU DISTRIBUTED COMPUTING PRINCIPLES AND APPLICATIONS (PB)

328 SHAMSEE CCNA DATA CENTER DCICT 200-155 OFFICIAL CERT GUIDE LEARN PREPARE AND PRACTICE FOR EXAM SUCCESS (PB)

329 KLOSS ANDROID APPS WITH APP INVENTOR (PB)

330 STALLINGS COMPUTER ORGANIZATION AND ARCHITECTURE DESIGNING FOR PERFORMANCE 9/E (PB)

331 RAGHUWANSHI ALGORITHM AND DATA STRUCTURES (PB)

332 AHO THE DESIGN AND ANALYSIS OF COMPUTER ALGORITHMS (PB)

333 GALIN SOFTWARE QUALITY ASSURANCE FROM THEORY TO IMPLEMENTATION (PB)

334 CHOW DISTRIBUTED OPERATING SYSTEMS AND ALGORITHM ANALYSIS (PB)

335 KRITHIVASAN INTRODUCTION TO FORMAL LANGUAGES, AUTOMATA THEORY AND COMPUTATION (PB)

336 SMITH INTERNET CRYPTOGRAPHY (PB)

337 PANDEY A TEXTBOOK OF COMPILER DESIGN (PB)

338 BHATIA DATABASE MANAGEMENT SYSTEM (PB)

339 HUBBARD DATA STRUCTURES WITH JAVA (PB)

340 KUMAR DATA STRUCTURES THROUGH C++ (PB)

341 BHARDWAJ A TEXTBOOK ON PATTERN RECOGNITION (PB)

342 CHOPRA SOFTWARE TESTING AND QUALITY ASSURANCE A PRACTICAL APPROACH WITH CD (PB)

343 PANDA MODERN APPROACHES OF DATA MINING THEORY (PB)

344 KUMAR DISTRIBUTED SYSTEMS DESIGN CONCEPTS (PB)

345 HELLMANN THE PYTHON 3 STANDARD LIBRARY BY EXAMPLE (PB)

346 RAJPUT DESIGN AND ANALYSIS OF ALGORITHMS (PB)

347 THOMAS GROWING UP WITH LANGUAGES REFLECTIONS ON MULTILINGUAL

348 TRIEBEL THE 8088 AND 8086 MICROPROCESSORS PROGRAMMING INTERFACING SOFTWARE HARDWARE AND APPLICATIONS 4T

349 SNEERINGER PROFESSIONAL PYTHON

350 WALPOLE PROBABILITY AND STATISTICS FOR ENGINEERING AND SCIENTISTS 9TH EDI

351 EDMONDS HOW TO THINK ABOUT ALGORITHMS

352 Ackerson Literature Search Strategies For Interdisciplinary Research

353 HUMPHREY A DISCIPLINE FOR SOFTWARE ENGINEERING

354 BABAR AGILE SOFTWARE ARCHITECTURE

355 KLEINBERG ALGORITHM DESIGN

356 BEYDA DATA COMMUNICATIONS FROM BASICS TO BROADBAND 4/ED

357 MOLLERUP DATA DESIGN: VISUALISING QUANTITIES, LOCATIONS, CONNECTIONS

358 LAFORE DATA STRUCTURES & ALGORITHMS IN JAVA 2/ED

359 MOLINA DATABASE SYSTEM IMPLEMENTATION

360 MOLINA DATABASE SYSTEMS THE COMPLETE BOOK 2/ED

361 GAMMA DESIGN PATTERNS: ELEMENTS OF REUSABLE OBJECT-ORIENTED SOFTWARE

362 HOPCROFT INTRODUCTION TO AUTOMATA THEORY, LANGUAGES, AND COMPUTATION 3/ED

363 KRITHIVASAN INTRODUCTION TO FORMAL LANGUAGES, AUTOMATA THEORY AND COMPUTATION

364 CRAIG INTRODUCTION TO ROBOTICS, MECHANICS AND CONTROL, 3/ED

365 GHOSH INTRODUCTION TO THEORY OF AUTOMATA, FORMAL LANGUAGES, AND COMPUTATION

366 DEITEL JAVA 9 FOR PROGRAMMERS 4/ED

367 HOFFER MODERN DATABASE MANAGEMENT10/ED

368 HOFFER

MODERN SYSTEMS ANALYSIS AND DESIGN 6/ED

369 SYRSTAD MY EXCEL 2016

370 DOAN PRINCIPLES OF DATA INTEGRATION

371 THE OFFICAIL GUIDE FOR GMAT REVIEW 13TH EDI

372 GROOVER CAD/CAM COMPUTER AIDED DESIGN AND MANUFACTURING

373 IRVINE ASSEMBLY LANGUAGE FOR X86 PROCESSORS 7TH EDI

374 FEHER WIRELESS DIGITAL COMMUNICATIONS MODULATION AND SPREAD

375 ECKEL THINKING IN C++ INTRODUCTION TO STANDARD C++ 2ND EDI VOL 1

376 COMER D E COMPUTER NETWORKS AND INTERNETS 6TH/ED (LPE)

377 BUDGEN D SOFTWARE DESIGN 2ND/ED (LPE)

378 SAVITCH W PROBLEM SOLVING WITH C++ 9TH/ED (LPE)

379 SUBRAMANIAN C SOFTWARE ENGINEERING (LPE)

380 HUGHES J F COMPUTER GRAPHICS: PRINCIPLES AND PRACTICE 3RD/ED (LPE)

381 DEITEL P J JAVA HOW TO PROGRAM 11TH/ED (LPE)

382 HOFFER J A MODERN DATABASE MANAGEMENT 12TH/ED (LPE)

383 STALLINGS W NETWORK SECURITY ESSENTIALS: APPLICATION AND STANDARDS 6TH/ED (LPE)

384 HELLMANN D PYTHON 3 STANDARD LIBRARY BY EXAMPLE (LPE)

385 KOCHAN S G SHELL PROGRAMMING IN UNIX, LINUX AND OS X 4TH/ED (LPE)

386 SHAW M SOFTWARE ARCHITECTURE: PERSPECTIVES ON AN EMERGING DISCIPLINE (LPE)

387 FORSYTH D A COMPUTER VISION: A MODERN APPROACH 2ND/ED (LPE)

388 NAIK S CONCEPT OF DATABASE MANAGEMENT SYSTEM (LPE)

389 SEBESTA R W CONCEPTS OF PROGRAMMING LANGUAGES 10TH/ED (LPE)

390 HORSTMANN C S CORE JAVA VOL-I: FUNDAMENTALS 10TH/ED (LPE)

391 TENENBAUM A M DATA STRUCTURES USING C (LPE)

392 SHARMA A K DATA STRUCTURES USING C 2ND/ED (LPE)

393 KROENKE D M DATABASE PROCESSING: FUNDAMENTALS, DESIGN AND IMPLEMENTATION 13TH/ED (LPE)

394 MOLINA H G DATABASE SYSTEMS: THE COMPLETE BOOK 2ND/ED (LPE)

395 PRATA S C++ PRIMER PLUS 6TH/ED (LPE)

396 JOHNSTON B C++ PROGRAMMING TODAY 2ND/ED (INCLUDES CD-ROM)...LPE

397 DAVIES E R COMPUTER AND MACHINE VISION: THEORY ALGORITHMS PRACTICALITIES 4TH/ED (IND/ED)

398 GALIN D SOFTWARE QUALITY ASSURANCE: FROM THEORY TO IMPLEMENTATION (LPE)

399 GONZALEZ R C DIGITAL IMAGE PROCESSING 4TH/ED (LPE)

400 MANO M M COMPUTER SYSTEM ARCHITECTURE 3RD/ED (LPE)

401 KAIN R Y ADVANCED COMPUTER ARCHITECTURE: A SYSTEMS DESIGN APPROACH (LPE)

402 LANO K ADVANCED SYSTEMS DESIGN WITH JAVA, UML AND MDA (IND/ED)

403 GUPTA R AGILE AUTOMATION AND UNIFIED FUNTIONAL TESTING (LPE)

404 DATE C J AN INTRODUCTION TO DATABASE SYSTEMS 8TH/ED (LPE)

405 KLOSS J H ANDROID APPS WITH APP INVENTOR (LPE)

406 LARMAN C APPLYING UML PATTERNS: AN INTRODUCTION TO OBJECT-ORIENTED ANALYSIS & DESIGN 3RD/ED (LPE)

407 WALLACE P INTRODUCTION TO INFORMATION SYSTEMS: PEOPLE, TECHNOLOGY AND PROCESSES 3RD/ED (LPE)

408 SOMMERVILLE I SOFTWARE ENGINEERING 10TH/ED (LPE)

409 WELLING L PHP AND MYSQL WEB DEVELOPMENT 5TH/ED (LPE)

410 BURD B JAVA FOR DUMMIES 7TH/ED (IND/ED)

411 STEVENS W R ADVANCED PROGRAMMING IN THE UNIX ENVIRONMENT 3RD/ED (LPE)

412 SCHWARZ R ANDROID DEVELOPER'S COOKBOOK: BUILDING APPLICATIONS WITH THE ANDROID SDK 2ND/ED (LPE)

413 LIANG Y D INTRODUCTION TO JAVA PROGRAMMING: BRIEF VERSION 9TH/ED (LPE)

414 JALOTE P SOFTWARE PROJECT MANAGEMENT IN PRACTICE (LPE)

415 STALLINGS W OPERATING SYSTEMS: INTERNALS AND DESIGN PRINCIPLES 9TH/ED (LPE)

416 NATARAJAN A M OPERATIONS RESEARCH 2ND/ED (LPE)

417 KUROSE J F COMPUTER NETWORKING: A TOP-DOWN APPROACH FEATURING THE INTERNET 6TH/ED (LPE)

418 DEITEL P J INTERNET AND WORLD WIDE WEB: HOW TO PROGRAM 5TH/ED (LPE)

419 MEIKE G B ANDROID CONCURRENCY (LPE)

420 AVEN J DATA ANALYTICS WITH SPARK USING PYTHON (LPE)

421 SCHIESSER R IT SYSTEMS MANAGEMENT: DESIGNING, IMPLEMENTING & MANAGING WORLD-CLASS 2ND/ED (LPE)

422 KAMTHANE A N PROGRAMMING IN C 3RD/ED (LPE)

423 ARLOW J UML 2 AND THE UNIFIED PROCESS: PRACTICAL OBJECT-ORIENTED ANALYSIS & D

424 KÄVRESTAD J FUNDAMENTALS OF DIGITAL FORENSICS: THEORY, METHODS, AND REAL-LIFE APPLICATIONS

425 HUMPHREY A DISCIPLINE FOR SOFTWARE ENGINEERING

426 HUSSAIN A HISTORY OF THE PEOPLES OF PAKISTAN TOWARDS INDEPENDENCE

427 WALLACE CCNP ROUTING AND SWITCHING ROUTE 300-101 OFFICIAL CERT GUIDE WITH-CD

428 KUMAR COMMUNICATION NETWORKING AN ANALYTICAL APPROACH

429 LAFORE DATA STRUCTURES & ALGORITHMS IN JAVA 2/ED

430 MOLINA DATABASE SYSTEM IMPLEMENTATION

431 MOLINA DATABASE SYSTEMS THE COMPLETE BOOK 2/ED

432 KOLMAN DISCRETE MATHEMATICAL STRUCTURES, 6/ED

433 JOSEPH E-COMMERCE 5/ED

434 LAUDON E-COMMERCE: BUSINESS, TECHNOLOGY, SOCIETY 10/ED

435 GASTER HETEROGENEOUS COMPUTING WITH OPEN CL

436 HOPCROFT INTRODUCTION TO AUTOMATA THEORY, LANGUAGES, AND COMPUTATION 3/ED

437 LEWIS JAVA SOFTWARE SOLUTIONS FOUNDATIONS OF PROGRAM DESIGN 9/ED

438 GARG MOBILE COMPUTING: THEORY AND PRACTICE

439 YATES MODERN INFORMATION RETRIEVAL

440 HOFFER

MODERN SYSTEMS ANALYSIS AND DESIGN 6/ED

441 LINDFIELD NUMERICAL METHODS USING MATLAB 3/ED

442 MALL REAL-TIME SYSTEMS THEORY AND PRACTICE

443 SOMMERVILLE SOFTWARE ENGINEERING, 10/ED

444 TANENBAUM STRUCTURED COMPUTER ORGANIZATION 6/ED

445 GARG WIRELESS COMMUNICATIONS AND NETWORKING

ELECTRICAL ENGINEERING

446 SCHILLING INTRODUCTION TO DIGITAL SIGNAL PROCESSING USING MATLAB 2ND ED

447 THYAGARAJAN INTRODUCTION TO DIGITAL SIGNAL PROCESSING USING MATLAB WITH APPLICATION TO DIGITAL COMMUNICATIONS

448 GANDHI ANALOG AND DIGITAL COMMUNICATIONS THEORY AND LAB WORK

449 SHAFFER FUNDAMENTALS OF POWER ELECTRONICS WITH MATLAB

450 KABALCI SMART GRIDS AND THEIR COMMUNICATION SYSTEMS

451 ALEXANDER FUNDAMENTALS OF ELECTRIC CIRCUITS 6TH ED

452 MAKABE PLASMA ELECTRONICS APPLICATIONS IN MICROELECTRONIC DEVICE FABRICATION 2ND ED

453 SHERTUKDE POWER SYSTEMS ANALYSIS ILLUSTRATED WITH MATLAB AND ETAP

454 GUPTA A COURSE IN ELECTRICAL INSTALLATION ESTIMATING & COSTING

455 PALLETT AIRCRAFT ELECTRICAL SYSTEMS 3RD ED

456 SADIKU APPLIED CIRCUIT ANALYSIS (INDIAN ED)

457 KOSOW ELECTRIC MACHINERY AND TRANSFORMERS 2ND ED

458 BHADRA ELECTRIC MACHINERY EXPERIMENTS LABORATORY PRACTICES AND SIMULATION STUDIES

459 HUBERT ELECTRIC MACHINES THEORY, OPERATION, APPLICATION, ADJUSTMENT, AND CONTROL 2ND ED

460 TORO ELECTRICAL ENGINEERING FUNDAMENTALS 2ND ED

461 HAMBLEY ELECTRICAL ENGINEERING PRINCIPLES AND APPLICATIONS 6TH ED

462 WILDI ELECTRICAL MACHINES, DRIVES, AND POWER SYSTEMS 6TH ED

463 PHILIPS FEEDBACK CONTROL SYSTEMS 5TH ED

464 JOHNSON INTRODUCTION TO DIGITAL SIGNAL PROCESSING

465 ALCIATORE INTRODUCTION TO MECHATRONICS AND MEASUREMENT SYSTEMS 4TH ED

466 HELFRICK MODERN ELECTRONIC INSTRUMENTATION AND MEASUREMENT TECHNIQUES.

467 SHUBHANGA POWER SYSTEM ANALYSIS A DYNAMIC PERSPECTIVE

468 INGOLE POWER TRANSMISSION AND DISTRIBUTION

469 KALLURI PRINCIPLES OF ELECTROMAGNTIC WAVES AND MATERIALS 2ND ED ORIGINAL

470 WEBB PROGRAMMABLE LOGIC CONTROLLERS PRINCIPLES AND APPLICATIONS 5TH ED

471 KOTHARI RENEWABLE ENERGY SOURCES AND EMERGING TECHNOLOGIES 2ND ED

472 HAYKIN SIGNALS AND SYSTEMS 2ND ED

473 MAZIDI THE AVR MICROCONTROLLER AND EMBEDDED SYSTEMS USING ASSEMBLY AND C

474 MAZIDI PIC MICROCONTROLLER AND EMBEDDED SYSTEMS USING ASSEMBLY AND C FOR PIC18

475 CORMEN INTRODUCTION TO ALGORITHMS 3RD ED

476 DUNN FUNDAMENTALS OF INDUSTRIAL INSTRUMENTATION AND PROCESS CONTROL

477 MEHTA PRINCIPLES OF POWER SYSTEM REVISED EDITION

478 THERAJA A TEXTBOOK OF ELECTRICAL TECHNOLOGY

479 MEHTA PRINCIPLES OF ELECTRICAL ENGINEERING AND ELECTRONICS REVISED ED

480 MEHTA PRINCIPLES OF ELECTRICAL MACHINES

481 STEVENSON ELEMENTS OF POWER SYSTEM ANALYSIS 4TH ED

482 TONG INTRODUCTION TO MATERIALS FOR ADVANCED ENERGY SYSTEMS (HB)

483 HAYKIN COMMUNICATION SYSTEMS 5/E (PB)

484 GOODWIN CONTROL SYSTEM DESIGN + CD (PB)

485 MORALES ADAPTIVE FILTERING APPLICATIONS (HB)

486 WANG WIRELESS COMMUNICATION SYSTEMS ADVANCED TECHNIQUES FOR SIGNALS RECEPTION (PB)

487 RABINER DIGITAL PROCESSING OF SPEECH SIGNALS

488 RAO MICROWAVE AND RADAR ENGINEERING

489 HAYKIN NEURAL NETWORKS AND LEARNING MACHINES 3RD EDI

490 WIDROW ADAPTIVE SIGNAL PROCESSING

491 STROIK BUILDING SECURITY

492 FLOUDAS ENCYCLOPEDIA OF OPTIMIZATION 2ND EDI VOL 6

493 ZHANG OPTIMAL HIGH-THROUGHPUT SCREENING PRACTICAL EXPERIMENTAL DESIGN

494 METHELY ESSENTIALS OF MESH WORKING

495 HOROWITZ POWER SYSTEM RELAYING

496 ROY CIRCUITS,SYSTEM AND SIGNAL PROCESSING:A TUTORIAL APPROACH

497 ZOBBA CLASSICAL AND RECENT ASPECTS OF POWER SYSTEM OPTIMIZATION

498 MARWEDEL EMBEDDED SYSTEM DESIGN:EMBEDED SYSTEM FOUNDATIONS OF CYBER-PHYSICAL SYSTEM,AND THE INERNET THINGS

499 LI LIGHT-EMITTING DIODES:MATERIALS,PROCESSING,DEVICES AND APPLICATIONS.

500 HOU MODEL FREE ADAPTIVE CONTROL:THEORY AND APPLICATIONS

501 LOUIE OFF-GRID ELECTRICAL SYSTEMS IN DEVELOPING COUNTRIES

502 THYAGARJAN INTRODUCTION TO DIGITAL SIGNAL PROCESSING USING MATLAB WITH APPLICATION TO DIGITAL COMMUNICATION

503 VEENDRICK NANOMETER CMOS ICS:FROM BASIC TO ASICS

504 NAHIN TRANSIENTS FOR ELECTRICAL ENGINEERINS:ELEMENTA SWITCHED-CIRCUIT ANALYSIS IN THE TIME AND Laplace

505 LAPIDOTH A FOUNDATION IN DIGITAL COMMUNICATIONS

506 Gokhale introduction To Telecommunications 2nd ed

507 ENGQUIST HIGH OSCILLATORY PROBLEMS

508 RIDLEY QUANTUM ROCESSES IN SEMICONDUCTORS

509 WEINER LIGHT-MATTER INTERACTION PHYSICS AND ENGINEERING AT THE NANOSCALE

510 YUSUF LEBL FUNDAMENTALS OF HIGH FREQUENCY CMOS ANALOGUE INTEGRATED CIRCUITS

511 DESURVIRE CLASSICAL QUANTUM AND INFORMATION THEORY

512 HARRIS ELASTIC WAVES AT HIGH FREQUENCIES

513 MILNER THE SPACE AND MOTION OF COMMUNICATING AGENTS

514 OLDEROG REAL-TIME SYSTEMS FORMAL SPECIFICATION AND AUTOMATIC VERIFICATION

515 ZIEMER R E SIGNALS AND SYSTEMS: CONTINUOUS AND DISCRETE 4TH/ED (LPE)

516 PHILLIPS C L SIGNALS, SYSTEMS, AND TRANSFORMS 4TH/ED (LPE)

517 RAFIQUZZAMAN M MICROCONTROLLER THEORY AND APPLICATIONS WITH THE PIC18F 2ND/ED

518 WILDI T ELECTRICAL MACHINES, DRIVES AND POWER SYSTEMS 6TH/ED (LPE)

519 DEKKER A J ELECTRICAL ENGINEERING MATERIALS (LPE)

ENGLISH/LITERATURE

520 SWAN PRACTICAL ENGLISH USAGE FULLY REVISED INTERNATIONAL EDITION

521 CHAPELLE THE CONCISE ENCYCLOPEDIA OF APPLIED LINGUISTICS

522 MARTIN WREN & MARTIN HIGH SCHOOL ENGLISH GRAMMAR & COMPOSITION (MULTICOLOUR EDITION)

523 YULE THE STUDY OF LANGUAGE 6TH ED

524 GRIFFITHS AN INTRODUCTION TO ENGLISH SEMANTICS AND PRAGMATICS 2ND ED

525 LYONS LANGUAGE AND LINGUISTICS AN INTRODUCTION

526 REYNOLDS CAMBRIDGE IGCSE ENGLISH AS A SECOND LANGUAGE + CD (PB)

527 ASHTON COLLINS WORK ON YOUR ACCENT + CD CLEARER PRONUNCIATION FOR BETTER COMMUNICATION (PB)

528 - COLLINS WORK ON YOUR GRAMMAR ELEMENTARY A 1 (PB)

529 THORPE OBJECTIVE ENGLISH FOR COMPETITIVE EXAMINATIONS 6/E (PB)

530 SHARPE BARRONS TOEFL IBT 15/E AUDIO CD (PB)

531 KAPLAN GRE GRADUATE RECORD EXAMINATION MATH WORKBOOK 10/E (PB)

532 BIBER LONGMAN STUDENT GRAMMAR OF SPOKEN AND WRITTEN ENGLISH (PB)

533 WARNICK CRITICAL THINKING AND COMMUNICATION THE USE OF REASON IN ARGUMENT 6/E (PB)

534 . COLLINS COBUILD ADVANCED LEARNER'S DICTIONARY 8/E (PB)

535 JOHNSON K AN INTRODUCTION TO FOREIGN LANGUAGE LEARNING AND TEACHING

536 SINGH S ENGLISH GRAMMAR & USAGE

537 SINGH S ENGLISH LANGUAGE AND LINGUISTICS

538 MCLNTOSH CAMBRIDGE ADVANCED LEARNER'S DICTIONARY 4/ED (HARDBACK)

539 MCGREGOR LINGUISTICS: AN INTRODUCTION 2/ED

540 LONGMAN LOGMAN DICTIONARY OF CONTEMPORARY ENGLISH FOR ADVANCED LEARNERS

541 DORNYEI RESEARCH METHODS IN APPLIED LINGUISTICS

542 BALL Assessing Grammar: The Languages of LARSP

543 Ayto Oxford Dictionary of Modern Slang

544 OUP Oxford Dictionary of Rhymes

islamiat /PAK STUDY

545 GIBB STUDIES ON THE CIVILIZATION OF ISLAM..

546 ASAD THE PRINCIPLES OF STATE AND GOVERNMENT IN ISLAM

547 AFSARUDDIN CONTEMPORARY ISSUES IN ISLAM

548 SNIR MODERN ARABIC LITERATURE A THEORETICAL FRAMEWORK

549 ANDRAE MOHAMMED THE MAN AND HIS FAITH

550 SALAHI MUHAMMAD (S.A.A.W) MAN AND PROPHET A COMPLETE STUDY OF THE LIFE OF THE PROPHET OF ISLAM

551 IQBAL ALI NABI KAREEM (SAWW) AUR SAHABA KRAM (R.A) IMAN AFROZ WAQEAAT

552 QADEER PAKISTAN SOCIAL AND CULTURAL TRANSFORMATIONS IN A MUSLIM NATION

553 AHMAD PAKISTAN SOCIETY ISLAM, ETHNICIY AND LEADERSHIP IN SOUTH ASIA

554 MAJEED QURAN INTERPRETATION IN URDU A CRITICAL STUDY

555 HASAN THE QURAN AND UNIVERSE ASTRONOMY IN THE LIGHT OF QURAN AND MODERN SCIENCE 8TH ENGLISH URDU ED

556 MEHMOOD KALA BAGH DAM SIFTING FACT FROM FICTION

557 DURRANI PAKISTAN ADRIFT NAVIGATING TROUBLED WATERS.

558 KHURSHID AHMAD FAMILY LIFE IN ISLAM

559 DR T B IRVING ISLAM AND SOCIAL RESPONSIBILITY

560 MUNT H HOLY CITY OF MEDINA: SACRED SPACE IN EARLY ISLAMIC ARABIA

561 DUDERIJA A HOLY CITY OF MEDINA: SACRED SPACE IN EARLY ISLAMIC ARABIA

562 HENNE P ISLAMIC POLITICS, MUSLIM STATES, AND COUNTERTERRORISM TENSIONS

563 MERAL M HOW VIOLENCE SHAPES RELIGION: BELIEF AND CONFLICT IN THE MIDDLE EAST A

564 LEWIS P ISLAMIC BRITAIN: ERLIGION, POLITICS & IDENTITY AMONG BRITISH MUSLIMS

565 AHMAD T LEGACY OF MUSLIM CIVILIZATION

566 SIDDIQUI COMMONALITIES AND SIMILARITIES IN WORLD RELIGIONS

567 HALEEM CRIMINAL JUSTIC IN ISLAM JUDICIAL PROCEDURE IN THE SHARI'A

568 SIDDIQI IS PAKISTAN A FAILED STATE?

569 SAKTANBER LIVING ISLAM: WOMEN, RELIGION AND THE POLITICIZATION OF CULTURE IN TURKEY

570 SALAHI MUHAMMAD HIS CHARACTER AND CONDUCT

571 MUSA MY VERSION INDIA-PAKISTAN WAR 1965

572 CHISHTI CONSTITUTIONAL DEVELOPMENT IN AFGHTANISTAN

573 MAWDUDI ISLAM'S POLITICAL ORDER THE MODEL,DEVIATIONS AND MUSLIM RESPONSE

574 ZAIDI ISSUES IN PAKISTAN'S ECONOMY A POLITICAL ECONOMY PERSPECTIVE 3/ED

575 WALIULLAH MUSLIM JURISPRUDANCE AND THE QURANIC LAW OF CRIMES

576 ALI PAKISTAN ENERGY DEVELOPMENT THE ROAD AHEAD

577 HUSAIN PAKISTAN THE ECONOMIY OF AN ELITIST STATE 2/ED

578 ZIRING PAKISTAN THE ENIGMA OF POLITICAL DEVELOPMENT

579 KHWAJA PEOPLE'S MOVEMENTS IN PAKISTAN

580 BURKI STATE AND SOCIETY IN PAKISTAN

581 BHATIA STUDIES IN ISLAMIC LAW RELIGION AND SOCIETY

582 BHATTI THE HOLY QURAN ON ENVIRONMENT

583 CHEEMA WOMEN AND TV CULTURE IN PAKISTAN: GENDER, ISLAM AND NATIONAL IDENTITY

METHEMATICS

584 WEIR THOMAS' CALCULUS 14TH ED

585 RAISINGHANIA ADVANCED DIFFERENTIAL EQUATIONS 19TH ED

586 BIRD ENGINEERING MATHEMATICS 8TH ED

587 CROFT ENGINEERING MATHEMATICS A FOUNDATION FOR ELECTRONIC, ELECTRICAL, COMMUNICATIONS AND SYSTEMS ENGINEERS 4TH ED

588 HARTLE GRAVITY AN INTRODUCTION TO EINSTEIN'S GENERAL RELATIVITY

589 BURDEN NUMERICAL ANALYSIS 9TH ED

590 ROST THE DARK SIDE OF SOFTWARE ENGINEERING EVIL ON COMPUTING PROJECTS

591 GOYAL TRANSFORMS AND PARTIAL DIFFERENTIAL EQUATIONS 2ND ED

592 SARKAR A TEXTBOOK OF DISCRETE MATHEMATICS 9/E (PB)

593 THOMAS CALCULUS AND ANALYTIC GEOMETRY 9/E (PB)

594 KUMAR HAND BOOK OF ENGINEERING MATHEMATICS WITH GATE TUTOR VOL 2 (PB)

595 ZAR BIOSTATISTICAL ANALYSIS 5/E (PB)

596 PUNDIR NUMERICAL METHODS SCIENCE AND ENGINEERING (PB)

597 MONTGOMERY APPLIED STATISTICS AND PROBABILITY FOR ENGINEERS 6/E (PB)

598 JOSHI CALCULUS FOR SCIENTISTS AND ENGINEERS AN ANALYTICAL APPROACH (PB)

599 ROSS DISCRETE MATHEMATICS 5/E (PB)

600 KHATTAR A COMPLETE RESOURCE BOOK IN MATHEMATICS FOR JEE MAIN 2018 (PB)

601 GOLDSTEIN CALCULUS AND ITS APPLICATIONS 13TH (PB)

602 HUNTER ESSENTIALS OF DISCRETE MATHEMATICS 3/E (PB)

603 GERALD APPLIED NUMERICAL ANALYSIS 7/E (PB)

604 BECKENBACH MODERN MATHEMATICS FOR THE ENGINEER FIRST SERIES (PB)

605 DAS INTEGRAL TRANSFORMS AND THEIR APPLICATIONS (PB)

606 RADHAKRISHNA WRITE MATHEMATICS RIGHT PRINCIPLES OF PROFESSIONAL PRESENTATION, EXEMPLIFIED WITH HUMOR AND THRILLS (PB)

607 RAJASEKARAN FINITE ELEMENT ANALYSIS IN ENGINEERING DESIGN (PB)

608 BHAT FUNDAMENTALS OF COMPLEX ANALYSIS (PB)

609 DESAI FINITE ELEMENT METHOD WITH APPLICATIONS IN ENGINEERING + CD (PB)

610 EDWARDS DIFFERENTIAL EQUATIONS AND BOUNDARY VALUE PROBLEMS COMPUTING AND MODELING 3/E (PB)

611 ARORA A TEXTBOOK OF ENGINEERING MATHEMATICS VOL II (PB)

612 MATHEWS NUMERICAL METHODS USING MATLAB 4/E (PB)

613 MOAVENI FINITE ELEMENT ANALYSIS THEORY AND APPLICATION WITH ANSYS 3/E (PB)

614 JAMES A STUDENTS GUIDE TO FOURIER TRANSFORMS WITH APPLICATIONS IN PHYSICS AND ENGINEERING 3/E (PB)

615 GUPTA NUMERICAL ANALYSIS (PB)

616 EDWARDS DIFFERENTIAL CALCULUS FOR BEGINNERS (PB)

617 DASS A TEXTBOOK OF ENGINEERING MATHEMATICS VOL 3 (PB)

618 DASS A TEXTBOOK OF ENGINEERING MATHEMATICS VOL I (PB)

619 ARORA A TEXTBOOK OF ENGINEERING MATHEMATICS VOL II (PB)

620 KUMAR DIFFERENTIAL CALCULUS (PB)

621 BINDRA A TEXTBOOK OF APPLIED MATHEMATICS (PB)

622 ARORA A TEXTBOOK OF APPLIED MATHEMATICS VOL IV (PB)

623 ARORA A TEXTBOOK OF APPLIED MATHEMATICS II (PB)

624 ARORA A TEXTBOOK OF APPLIED MATHEMATICS-I (PB)

625 APOSTOL T M CALCULUS VOL-2: MULTI-VARIABLE CALCULUS AND LINEAR ALGEBRA WITH APPLIC

626 BANSAL R K DISCRETE MATHEMATICS (IND/ED)

627 PINSKY R G PROBLEMS FROM THE DISCRETE TO THE CONTINUOUS: PROBABILITY, NUMBER THEORY, GRAH THEORY, & COMBINATORI

628 EDWARDS C H ELEMENTARY DIFFERENTARY EQUATIONS WITH BOUNDARY VALUE PROBLEMS 6TH/ED (LPE)

629 RATTAN K S INTRODUCTORY MATHEMATICS FOR ENGINEERING APPLICATIONS (IND/ED)

630 SIVIJAYAKUMARI ENGINEERING MATHEMATICS (LPE)

631 GUPTA G ENGINEERING MATHEMATICS VOL-I (LPE)

632 GUPTA G ENGINEERING MATHEMATICS VOL-II (LPE)

633 ASMAR N H COMPLEX ANALYSIS WITH APPLICATIONS

634 THANGARAJ V STOCHASTIC MODELING IN PHYSICAL AND BIOLOGICAL SCIENCES (IND/ED)

635 ISAEV A TWENTY-ONE LECTURES ON COMPLEX ANALYSIS: A FIRST COURSE

636 LIPSMAN R MULTIVARIABLE CALCULUS WITH MATLAB®: WITH APPLICATIONS TO GEOMETRY AND

637 CONSTANDA C DIFFERENTIAL EQUATIONS: A PRIMER FOR SCIENTISTS AND ENGINEERS

638 GARFINKEL A MODELING LIFE: THE MATHEMATICS OF BIOLOGICAL SYSTEMS

MECHANICAL ENGINEERING

639 JINDAL STRENGTH OF MATERIALS 2ND ED

640 BEER VECTOR MECHANICS FOR ENGINEERS DYNAMICS (IN SI UNITS) 11TH ED

641 RAO MECHANICAL VIBRATIONS 4TH ED

642 ASHBY MATERIALS ENGINEERING, SCIENCE, PROCESSING AND DESIGN 4TH ED

643 BLACK DEGARMO'S MATERIALS & PROCESSES IN MANUFACTURING SI VERSION 12TH ED

644 VAUGHN BIOETHICS PRINCIPLES, ISSUES, AND CASES 3RD ED

645 MERIAM ENGINEERING MECHANICS STATICS SI VERSION 8TH ED

646 MERIAM ENGINEERING MECHANICS DYNAMICS SI VERSION 10TH ED

647 EASTOP APPLIED THERMODYNAMICS FOR ENGINEERING TECHNOLOGISTS 5TH ED

648 CENGEL THERMODYNAMICS AN ENGINEERING APPROACH 8TH ED IN SI UNITS

649 PALLETT AIRCRAFT ELECTRICAL SYSTEMS 3RD ED

650 AGRAWAL AIRCRAFT GAS TURBINE ENGINE TECHNOLOGY

651 PALLETT AIRCRAFT INSTRUMENTS PRINCIPLES AND APPLICATIONS 2ND ED

652 KROES AIRCRAFT MAINTENANCE & REPAIR 7TH ED

653 ANDERSON AIRCRAFT PERFORMANCE AND DESIGN

654 WILD AIRCRAFT POWER PLANTS 8TH ED

655 KROES AIRCRAFT POWERPLANTS 7TH ED

656 JAFFE AIRSPACE CLOSURE AND CIVIL AVIATION A STRATEGIC RESOURCE FOR AIRLINE MANAGERS

657 MATTSON CNC PROGRAMMING PRINCIPLES AND APPLICATIONS

658 BANGA A TEXTBOOK ON AUTOMOBILE ENGINEERING

659 KUO AUTOMATIC CONTROL SYSTEM 9TH ED

660 SAEED AUTOMATIC CONTROL SYSTEMS (WITH MATLAB PROGRAMS)

661 GOLNARAGHI AUTOMATIC CONTROL SYSTEMS 10TH ED.

662 GOYAL AUTOMATION AND ROBOTICS

663 GROOVER AUTOMATION, PRODUCTION SYSTEMS, AND COMPUTER-INTEGRATED MANUFACTURING 4TH ED

664 RAMAKRISHNA AUTOMOBILE ENGINEERING

665 GIRI AUTOMOBILE MECHANICS

666 CROUSE AUTOMOTIVE MECHANICS 10TH ED

667 HEITNER AUTOMOTIVE MECHANICS PRINCIPLES & PRACTICES

668 KINNISON AVIATION MAINTENANCE MANAGEMENT 2ND ED

669 KROES AIRCRAFT BASIC SCIENCE 8TH ED

670 SOLARI WIND SCIENCE AND ENGINEERING ORIGINS, DEVELOPMENTS FUNDAMENTALS AND ADVANCEMENTS

671 BEJAN ADVANCED ENGINEERING THERMODYNAMICS 4TH ED

672 STANFORD III ANALYSIS AND DESIGN OF HEATING, VENTILATING, AND AIR-CONDITIONING SYSTEMS 2ND ED

673 BALASUBRAMANIAM CALLISTER'S MATERIALS SCIENCE AND ENGINEERING WITH CD 2ND ED

674 GRONDZIK MECHANICAL AND ELECTRICAL EQUIPMENT FOR BUILDINGS 13TH ED

675 STERNER HANDBOOK OF ENERGY STORAGE DEMAND, TECHNOLOGIES, INTEGRATION

676 INFIELD RENEWABLE ENERGY IN POWER SYSTEMS 2ND ED

677 HOLMAN HEAT TRANSFER 10/E (PB)

678 HIBBELER MECHANICS OF MATERIALS SI EDITION 9/E (PB)

679 KALPAKJIAN MANUFACTURING ENGINEERING AND TECHNOLOGY 7/E IN SI EDITION (PB)

680 ASHBY MATERIALS ENGINEERING, SCIENCE, PROCESSING AND DESIGN 3/E (PB)

681 HIBBELER ENGINEERING MECHANICS STATICS AND DYNAMICS 14/E (PB)

682 NORTON MACHINE DESIGN 5/E (PB)

683 GROOVER AUTOMATION, PRODUCTION SYSTEMS AND COMPUTER-INTEGRATED MANUFACTURING 4/E (PB)

684 POPOV ENGINEERING MECHANICS OF SOLIDS 2/E (PB)

685 STOECKER REFRIGRATION & AIR CONDITIONING 2/E (PB)

686 TU COMPUTATIONAL FLUID DYNAMICS A PRACTICAL APPROACH 2/E (PB)

687 ESPOSITO FLUID POWER WITH APPLICATIONS 7/E (PB)

688 SPOTTS DESIGN OF MACHINE ELEMENTS 8/E + CD (PB)

689 DUTTA HEAT TRANSFER PRINCIPLES AND APPLICATIONS (PB)

690 COIRO RENEWABLE ENERGY FROM THE OCEANS FROM WAVE TIDAL AND GRADIENT SYSTEMS TO OFFSHORE WIND AND SOLAR (HB)

691 GOLUSIN SUSTAINABLE ENERGY MANAGEMENT (HB)

692 HEGDE POWER PLANT ENGINEERING (PB)

693 MCQUISTON HEATING VENTILATING AND AIR CONDITIONING ANALYSIS AND DESIGN 6/E (PB)

694 DOSSAT PRINCIPLES OF REFRIGERATION 4/E (PB)

695 PITA AIR CONDITIONING PRINCIPLES AND SYSTEMS AN ENERGY APPROACH 4/E (PB)

696 BEVAN THEORY OF MACHINES 3/E (PB)

697 RAJPUT A TEXTBOOK OF HEAT AND MASS TRANSFER SI UNITS (PB)

698 NAMBUDIRIPAD ADVANCED MECHANICS OF SOLIDS A GENTLE INTRODUCTION (PB)

699 PARKASH MANUAL OF FIRE SAFETY (PB)

700 PULKRABEK ENGINEERING FUNDAMENTALS OF THE INTERNAL COMBUSTION ENGINE 2/E (PB)

701 VIJAYARAGHAVAN MECHATRONICS +CD(PB)

702 JENKINS RENEWABLE ENERGY ENGINEERING (PB)

703 SARAVANAMUTTOO GAS TURBINE THEORY 5/E (PB)

704 MOTT APPLIED FLUID MECHANICS 7/E (PB)

705 MURPHY INTRODUCTION TO SYSTEM DYNAMICS (PB)

706 VERSTEEG AN INTRODUCTION TO COMPUTATIONAL FLUID DYNAMICS THE FINITE VOLUME METHOD 2/E (PB)

707 KHURMI A TEXBOOK OF MACHINE DESIGN IN S I UNITS (PB)

708 GYFTOPOULOS THERMODYNAMICS FOUNDATIONS AND APPLICATIONS (PB)

709 DOWLING MECHANICAL BEHAVIOR OF MATERIALS 4/E (PB)

710 ANDERSON MODERN COMPRESSIBLE FLOW WITH HISTORICAL PERSPECTIVE 3/E (PB)

711 KHURMI HYDRAULICS FLUID MECHANICS AND HYDRAULIC MACHINES (SI UNITS) (PB)

712 HODGE COMPRESSIBLE FLUID DYNAMICS WITH PERSONAL COMPUTER APPLICATIONS (PB)

713 RAJPUT STRENGTH OF MATERIALS (MECHANICS OF SOLIDS) IN SI UNITS 6/E (PB)

714 ARORA REFRIGERATION AND AIR CONDITIONING (PB)

715 DEWITT PRINCIPLES OF HEAT AND MASS TRANSFER 7/E (PB)

716 DENTON ALTERNATIVE FUEL VEHICLES (PB)

717 BETHUNE ENGINEERING GRAPHICS WITH AUTOCAD 2015 (PB)

718 KIBBE MACHINE TOOL PRACTICES 9/E (PB)

719 KHURMI MECHANICAL ENGINEERING (CONVENTIONAL AND OBJECTIVE TYPE)

720 POPOV MECHANICS OF MATERIALS 2ND EDI

721 SPOTTS DESIGN OF MACHINE ELEMENTS 8TH EDI

722 Roosa Carbon Reduction Policies,Strategies and Technologies

723 BENIWAL AUTOMATIC CONTROL SYSTEMS WITH MATLAB PROGRAMMING

724 MERIAM ENGINEERING MECHANICS STATISTICS, VOLUME 1

725 GUPTA FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES 2/ED

726 DESSLER HUMAN RESOURCE MANAGEMENT 15/ED

727 NORTON MACHINE DESIGN, AN INTEGRATED APPROACH, 2/ED

728 KRAJEWSKI OPERATIONS MANAGEMENT: PROCESSES AND SUPPLY CHAINS, 11/ED

729 HEGDE POWER PLANT ENGINEERING

730 MEIER SUSTAINABLE ENERGY IN DEVELOPING COUNTRIES POLICY ANALYSIS AND CASE STUDIES

731 ACHIEVEMENT OF HIGH FATIGUE RESISTANCE IN METALS AND ALLOYS

732 SAKURAI ADVANCED QUANTUM MECHANICS

733 CHAPMAN CALIBRATION IN AIR MONITORING

734 SPOTTS DESIGN OF MACHINE ELEMENTS 8TH EDI

735 HICKEY FATIGUE AND FRACTURE TOUGHNESS CRYOGENIC BEHAVIOR

736 MEGSON T H G INTRODUCTION TO AIRCRAFT STRUCTURAL ANALYSIS 3RD/ED

737 GHOSH A INTRODUCTION TO DYNAMICS

738 ISERMANN R COMBUSTION ENGINE DIAGNOSIS: MODEL-BASED CONDITION MONITORING OF GASOLINE & DIESEL ENGINES & THEIR C

739 MYSZKA D H MACHINES AND MECHANISMS: APPLIED KINEMATIC ANALYSIS 4TH/ED (LPE)

740 KALPAKJIAN S MANUFACTURING ENGINEERING AND TECHNOLOGY: SI EDITION 7TH/ED (LPE)

741 REISEL J R PRINCIPLES OF ENGINEERING THERMODYNAMICS (IND/ED)

742 SINHA S K ENGINEERING MECHANICS: STATICS AND DYNAMICS (LPE)

743 FINCH R D INTRODUCTION TO ACOUSTICS (LPE)

744 HEGDE R K POWER PLANT ENGINEERING (LPE)

745 GERALD APPLIED NUMERICAL ANALYSIS, 7/ED

746 STOECKER DESIGN OF THERMAL SYSTEMS 3/ED

747 CHANDRA ENGINEERING GRAPHICS 4/ED

748 MERIAM ENGINEERING MECHANICS: STATICS, STUDENT VALUE EDITION 8/ED

749 GUPTA FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES 2/ED

750 POOLE LINEAR ALGEBRA: A MODERN INTRODUCTION 4/ED

751 SIMMONS MANUAL OF ENGINEERING DRAWING 4/ED

752 LINDFIELD NUMERICAL METHODS USING MATLAB 3/ED

753 DEMPSEY TROUBLESHOOTING AND REPAIRING DIESEL ENGINES 4/ED

physics

754 CHAISSON ASTRONOMY A BEGINNER'S GUIDE TO THE UNIVERSE 7TH ED

755 KUMAR ATOMIC AND LASER SPECTROSCOPY

756 SINGH FUNDAMENTALS OF OPTICS 2ND ED

757 KUMAR CONCEPTS OF ELECTRODYNAMICS

758 DASS HIGHER MATHEMATICAL PHYSICS FOR THE STUDENTS OF B.SC. (HONOURS) AND M.SC. (PHYSICS)

759 BASU AN INTRODUCTION TO ASTROPHYSICS 2ND ED

760 NARLIKAR AN INTRODUCTION TO COSMOLOGY 3RD ED

761 JENKINS FUNDAMENTALS OF OPTICS 4TH ED

762 CHATTOPADHYAY INTRODUCTION TO NANOSCIENCE AND NANOTECHNOLOGY

763 THYAGARAJAN LASERS FUNDAMENTALS AND APPLICATIONS 2ND ED.

764 ARFKEN MATHEMATICAL METHODS FOR PHYSICISTS A COMPREHENSIVE GUIDE 7TH ED

765 SHUR PHYSICS OF SEMICONDUCTOR DEVICES UPDATED ED

766 DRUMMOND PLASMA PHYSICS

767 PURI SPECIAL THEORY OF RELATIVITY

768 REITZ FOUNDATIONS OF ELECTROMAGNETIC THEORY 3/E (PB)

769 CHOUDHARY NANOSCIENCE AND NANOTECHNOLOGY (PB)

770 SINGH THERMAL PHYSICS KINETIC THEORY AND THERMODYNAMICS (PB)

771 CHANDRA TEXTBOOK OF PHYSICS FOR ENGINEERS (PB)

772 KAUSHAL ADVANCED METHODS OF MATHEMATICAL PHYSICS 2/E (HB)

773 BLOWERS The Legacy of Nuclear Power

774 WEINER LIGHT-MATTER INTERACTION PHYSICS AND ENGINEERING AT THE NANOSCALE

775 SHARMA S ENGINEERING PHYSICS (LPE)

776 CHUNG D D L CARBON MATERIALS: SCIENCE AND APPLICATIONS

777 LANGE D CMOS CANTILEVER SENSOR SYSTEMS: ATOMIC FORCE MICROSCOPY & GAS SENSING APP...SP

778 KREBS R E GROUNDBREAKING SCIENTIFIC EXPERIMENTS INVENTIONS & DISCOVERIES OF MIDDLES AGES

779 WINDELSPECHT M GROUNDBREAKING SCIENTIFIC EXPERIMENTS, INVENTIONS & DISCOVERIES OF THE 19TH CE

780 PRASAD R NUCLEAR PHYSICS (LPE)

781 SHARMA K K OPTICS: PRINCIPLES AND APPLICATIONS (IND/ED)

782 BLAKER J W OPTICS: AN INTRODUCTION FOR STUDENTS OF ENGINEERING (LPE)

783 HOBSON A PHYSICS: CONCEPTS AND CONNECTIONS 5TH/ED (LPE)

784 GRIFFITHS D J INTRODUCTION TO ELECTRODYNAMICS 4TH/ED (LPE)

chemistry

785 CRABTREE THE ORGANOMETALLIC CHEMISTRY OF THE TRANSITION METALS 7TH ED

786 KALSI ORGANIC SYNTHESIS THROUGH DISCONNECTION APPROACH 2ND REVISED ED

787 CRICHTON BIOLOGICAL INORGANIC CHEMISTRY A NEW INTRODUCTION TO MOLECULAR STRUCTURE AND FUNCTION 3RD ED

788 HOFMANN WILSON AND WALKER'S PRINCIPLES AND TECHNIQUES OF BIOCHEMISTRY AND MOLECULAR BIOLOGY 8TH ED

789 VOET VOET'S PRINCIPLES OF BIOCHEMISTRY GLOBAL ED

790 RODWELL HARPER'S ILLUSTRATED BIOCHEMISTRY 31ST ED

791 TYMOCZKO BIOCHEMISTRY A SHORT COURSE 4TH ED

792 PAVIA INTRODUCTION TO SPECTROSCOPY 5TH ED

793 BAHL A TEXTBOOK OF ORGANIC CHEMISTRY 22ND ED

794 KAPOOR A TEXTBOOK OF PHYSICAL CHEMISTRY: STATES OF MATER AND IONS IN SOLUTION (VOL-1) 5TH ED

795 PRAKASH ADVANCED CHEMISTRY OF RARE ELEMENTS REVISED EDITION

796 COTTON ADVANCED INORGANIC CHEMISTRY 6TH ED

797 KAR APPLICATION OF REDOX AND REAGENTS IN ORGANIC SYNTHESIS VOL-I

798 KUMAR ATOMIC AND LASER SPECTROSCOPY

799 LANDESBERG BASIC LABORATORY EXPERIMENTS FOR GENERAL, ORGANIC, AND BIOCHEMISTRY 2ND ED

800 TURNER BIOCATALYSIS IN ORGANIC SYNTHESIS THE RETROSYNTHESIS APPROACH

801 SIVASANKAR BIOSEPARATIONS PRINCIPLES AND TECHNIQUES

802 MADAN CHEMISTRY FOR DEGREE STUDENTS B.SC. FIRST YEAR

803 MADAN CHEMISTRY FOR DEGREE STUDENTS B.SC. SECOND YEAR

804 MADAN CHEMISTRY FOR DEGREE STUDENTS B.SC. THIRD YEAR

805 MALLICK CHEMISTRY FOR ENGINEERS

806 SAWYER CHEMISTRY FOR ENVIRONMENTAL ENGINEERING AND SCIENCE 5TH ED

807 BARLOW CHEMISTRY OF DRUGS

808 BHAT CHEMISTRY OF NATURAL PRODUCTS REVISED ED

809 ROY CHEMISTRY OF PESTICIDES

810 SPIRO CHEMISTRY OF THE ENVIRONMENT 3RD ED.

811 MAHESHWARI CLINICAL BIOCHEMISTRY 2ND ED

812 RATTAN COMPREHENSIVE ENGINEERING CHEMISTRY

813 BLUMICH ESSENTIAL NMR FOR SCIENTISTS AND ENGINEERS 2ND ED

814 RAMAKRISHNAN ESSENTIALS OF ANALYTICAL CHEMISTRY

815 KAR FUNDAMENTALS OF ORGANIC SYNTHESIS THE REPROSYNTHETIC ANALYSIS VOL-II

816 GILCHRIST HETEROCYCLIC CHEMISTRY 3RD ED

817 THOMPSON INFRARED SPECTROSCOPY

818 WELLER INORGANIC CHEMISTRY INTL. ED

819 THOMAS MEDICINAL CHEMISTRY AN INTRODUCTION 2ND ED

820 HOWARD MODERN PROTEIN CHEMISTRY PRACTICAL ASPECTS

821 ARULDHAS MOLECULAR STRUCTURE AND SPECTROSCOPY 2ND ED

822 MCMICHAEL NANOSCIENCE

823 FOSTER NANOTECHNOLOGY SCIENCE, INNOVATION AND OPPORTUNITY

824 BRAHMACHARI NATURAL PRODUCTS CHEMISTRY, BIOCHEMISTRY AND PHARMACOLOGY

825 MOHAN ORGANIC SPECTROSCOPY PRINCIPLES AND APPLICATIONS 2ND ED

826 WYATT ORGANIC SYNTHESIS STRATEGY AND CONTROL

827 DEAN PRACTICAL SKILLS IN CHEMISTRY 3RD ED\

828 DEMAN PRINCIPLES OF FOOD CHEMISTRY 4TH ED

829 HOLLER PRINCIPLES OF INSTRUMENTAL ANALYSIS 6TH ED

830 LEVINE QUANTUM CHEMISTRY 7TH ED

831 KENT RIEGEL'S HANDBOOK OF INDUSTRIAL CHEMISTRY 9TH ED

832 ALAGARSAMY TEXTBOOK OF MEDICINAL CHEMISTRY VOL-II 2ND ED

833 BECHTOLD TEXTILE CHEMISTRY

834 WALSH THE CHEMICAL BIOLOGY OF HUMAN VITAMINS

835 SINGHAL THE PEARSON GUIDE TO ORGANIC CHEMISTRY FOR THE IIT JEE 2012

836 SVEHLA VOGEL'S QUALITATIVE INORGANIC ANALYSIS 7TH ED

837 FURNISS VOGEL'S TEXTBOOK OF PRACTICAL ORGANIC CHEMISTRY 5TH ED

838 DENNISTON FOUNDATIONS OF GENERAL ORGANIC AND BIOCHEMISTRY (HB)

839 KEELER UNDERSTANDING NMR SPECTROSCOPY 2/E (PB)

840 BIRDI SURFACE CHEMISTRY OF CARBON CAPTURE CLIMATE CHANGE ASPECTS (HB)

841 THORNTON ORGANIC CHEMISTRY 6/E (PB)

842 FINAR ORGANIC CHEMISTRY VOL 2: STEREOCHEMISTRY AND THE CHEMISTRY OF NATURAL PRODUCTS 5/E (PB)

843 TRO CHEMISTRY STRUCTURE AND PROPERTIES (PB)

844 POSTEN INTEGRATED BIOPROCESS ENGINEERING (PB)

845 RATTAN A TEXTBOOK OF ENGINEERING CHEMISTRY (PB)

846 VITHA M F CHROMATOGRAPHY: PRINCIPLES AND INSTRUMENTATION

847 WENSKE G DICTIONARY OF CHEMISTRY (ENGLISH/GERMAN)

848 IBANEZ J G ENVIRONMENTAL CHEMISTRY: FUNDAMENTALS

849 RAMAKRISHNAN S ESSENTIALS OF ANALYTICAL CHEMISTRY (LPE)

850 SMITH M B MARCH'S ADVANCED ORGANIC CHEMISTRY: REACTIONS, MECHANISMS AND STRUCTURE 7TH/ED (IND/ED)

851 WALSH C T NATURAL PRODUCT BIOSYNTHESIS: CHEMICAL LOGIC AND ENZYMATIC MACHINERY

852 BIDLINGMEYR R B PRACTICAL HPLC METHODOLOGY AND APPLICATIONS (IND/ED)

853 BAMFORD M RECENT ADVANCES IN FORENSIC CHEMISTRY

854 SOLOMONS T W G SOLOMONS'S ORGANIC CHEMISTRY (GLOBAL EDITION)...IND/ED

855 MICHL J SPECTROSCOPY WITH POLARIZED LIGHT

856 HANSEN L TITRATION CALORIMETRY: FROM CONCEPT TO APPLICATION

857 PANDEY H K BASIC COORDINATION CHEMISTRY (IND/ED)

858 LAMBERT J B NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY: AN INTRODUCTION TO PRINCIPLES 2ND/ED

859 BAHADORI HAZARDOUS AREA CALLIFICATION IN PETROLEUM AND CHEMICAL PLANTS A GUIDE TO MITIGATING RISK

860 OUP OXFORD DICTIONARY OF CHEMISTRY

861 SHULER BIOPROCESS ENGINEERING BASIC CONCEPTS 2/ED

862 MITRA ENVIRONMEFNTAL CHEMICAL ANALYSIS 2/ED

863 KARAK FUNDAMENTALS OF POLYMERS RAW MATERIALS TO FINISH PRODUCTS

UNIVERSITY OF ENGINEERING & TECHNOLOGY, LAHORE TERMS ... · c. Mechanics of Machines Lab. Amount of...

Documents

Transcript of UNIVERSITY OF ENGINEERING & TECHNOLOGY, LAHORE TERMS ... · c. Mechanics of Machines Lab. Amount of...