Universal Compact Extruded Cylinders · 2D & 3D CAD Drawings & Models 2D and 3D files are available...
Transcript of Universal Compact Extruded Cylinders · 2D & 3D CAD Drawings & Models 2D and 3D files are available...
• 7 bore sizes• Superior service with quick delivery• Universal metric and imperial ports available• Multiple mounting options• Low profile GMR sensor slides into groove within the cylinder• Available with magnetic pistons• Custom strokes also welcomed• Interchangeable design allows for quick drop-in replacements• Bumpers standard
Clippard’s new compact, extruded body cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally-compatible, they are lightweight, small in size, and provide a reliable, long cycle life.
The various mounting configurations, many bore sizes, stroke lengths and other valuable options, make this the most versatile and interchangeable cylinder line in the world.
Combined with Clippard’s long-standing history of quality products, outstanding service and fast delivery, these cylinders are an ideal solution for your pneumatic actuation needs.
A complete offering of valves, air preparation equipment, fittings, tubing, foot brackets, switches and rod nuts also available for your complete design needs.
Universal Compact Extruded Cylinders
SPECIFICATIONSMedium AirMaximum Pressure 150 psig / 10 barStrokes 1/8” to 4” / 5 to 100 mmThreads M5x0.8, #10-32, G1/8, 1/8” NPT, G1/4 & 1/4” NPTTemperature Range 14 to 140°F / -10 to 60°CMounting Thread or Thru Holes Material Aluminum, Stainless SteelPiston & Head Seals Nitrile standard
Nitrile bumpers standard
Wrench flats to aid in installation
Available with Auto Switch (magnets) for position sensors
Polyurethane wiper/rod seal
Magnetic sensor tracks standard on Auto Switch models
Clear annodized aluminum body
High strength aluminum piston
Chrome-plated 303 stainless steel rod
Wear bands standard on32 mm double rod models and all 40 and 50 mm series
Self-lubricating bearing available on larger models
PTFE lubrication available
Female rod threads standard; male optional
Threaded or thru hole mounting
Read more online at clippard.com/link/ext-tds
Clippard Cylinder Interchange GuideIf you need to replace a cylinder from another manufacturer, clippard.com makes it easy with a built-in cylinder Interchange Guide. Simply enter your cylinder part number into any search box and the cross reference will identify which Clippard cylinders are most similar, complete with a full specification comparison. If you don’t know the part number, you can configure the competitor’s cylinder on the Interchange Guide page as well.
2D & 3D CAD Drawings & Models2D and 3D files are available for Clippard’s thousands of pneumatic components. Move, rotate, and zoom to make certain the product fits exactly into your design. Downloaded models can be used in all popular 3D modeling software.
Private Label OptionClippard offers multiple private label options. Call for details.
Flow ControlsClippard offers many types of adjustable flow controls with #10-32 through 3/8” NPT ports. They feature a combination needle and check valve that controls flow in one direction and allows free flow in the opposite direction.
They are an ideal valve for use with a cylinder, providing a slow extend stroke while allowing a fast retract stroke.
Input Pressure Up to 300 psig / 20 barFunction Meter In or Meter OutMounting Directly into Port
Exhaust ValvesIn a typical application the exhaust valve is installed in the inlet of a spring return or double acting pneumatic cylinder.
Supply air from a control valve is directed into the inlet port of the exhaust valve. The Nitrile poppet seals the exhaust port and allows air to flow from the outlet port of the valve into the cylinder.
The pressurized air pushes against the piston and extends the rod, compressing the spring until full rod extension is achieved.
When the control vavle exhausts air from the exhaust valve inlet port, the Nitrile poppet shifts to seal the inlet port and open the exhaust port to the cylinder. The pressurized air is allowed to exhaust directly through the exhaust valve to atmosphere.
Normally the air must travel back through the long airline to the control valve to exhaust. By mounting the exhaust valve directly on the cylinder, the piston retracts quickly since the distance to atmosphere is very short and unrestricted.
Clippard’s J-Series Exhaust Valve offers a variety of design features and provides fast response times and high flow with 1/8” and 1/4” NPT ports. 15 to 150 psig maximum.
Custom SolutionsClippard’s innovative Engineering Team works closely to define your unique requirement and recommend the best solution. Highly-experienced engineers and CAD specialists will design, build and test the assembly to your specification. Clippard has a unique advantage by providing custom products and value-added assemblies based on the most successful miniature pneumatic line in the world. Our goal is to optimize a systems design, to increase performance, reduce cost, and allow our customers to concentrate on their core competencies. We welcome all opportunites!
2
Max. Thru Mtg. Mounting Rod End RodBore Stroke Hole Thread Thread Ports Dia. Page(s)Double Acting, Rotating & Double Rod Models12 mm 30 3.5 mm thru M4x0.7-7mm deep / #8-32 UNC-2B M3x0.5-6mm deep / #6-32 M5x0.8 / #10-32 6 mm 7-8, 10-1116 mm 30 3.5 mm thru M4x0.7-7mm deep / #8-32 UNC-2B M4x0.7-8mm deep / #6-32 M5x0.8 / #10-32 8 mm 7-8, 10-1120 mm 50 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x0.8-7mm deep / #10-32 M5x0.8 / #10-32 10 mm 7-8, 10-1125 mm 50 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M6x1.0-12 mm deep / 1/4-28 M5x0.8 / #10-32 12 mm 7-8, 10-1132 mm 100 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x1.25-13 mm deep / 5/16-14 G1/8 / 1/8” NPT 16 mm 9, 1240 mm 100 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x1.25-13 mm deep / 3/8-24 G1/8 / 1/8” NPT 16 mm 9, 1250 mm 100 6.6 mm thru M8x1.25-14mm deep / 5/16-18 UNC-2B M10x1.5-15mm deep / 1/2-20 G1/4 / 1/4” NPT 20 mm 9, 12
Single Acting, Spring Return & Extended Models12 mm 20 3.5 mm thru M4x0.7-7mm deep / #8-32 UNC-2B M3x0.5-6mm deep / #6-32 M5x0.8 / #10-32 6 mm 13-14, 16-1716 mm 20 3.5 mm thru M4x0.7-7mm deep / #8-32 UNC-2B M4x0.7-8mm deep / #6-32 M5x0.8 / #10-32 8 mm 13-14, 16-1720 mm 20 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x0.8-7mm deep / #10-32 M5x0.8 / #10-32 10 mm 13-14, 16-1725 mm 20 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M6x1.0-12 mm deep / 1/4-28 M5x0.8 / #10-32 12 mm 13-14, 16-1732 mm 20 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x1.25-13 mm deep / 5/16-14 G1/8 / 1/8” NPT 16 mm 15, 1840 mm 20 5.5 mm thru M6x1.0-10mm deep / 1/4-20 UNC-2B M8x1.25-13 mm deep / 3/8-24 G1/8 / 1/8” NPT 16 mm 15, 1850 mm 20 6.6 mm thru M8x1.25-14mm deep / 5/16-18 UNC-2B M10x1.5-15mm deep / 1/2-20 G1/4 / 1/4” NPT 20 mm 15, 18
Part Number CQ2- - - - Threads Metric M- Imperial (blank) Mounting Type Threaded (both ends) A Thru Holes BCylinder Type Double Acting D Single Acting, Spring Return S Single Acting, Spring Extended RRod Type Rotating R Double (Double Acting only) DBore Size (Port Thread) 12 mm (M5x0.8 or #10-32) 12 16 mm (M5x0.8 or #10-32) 16 20 mm (M5x0.8 or #10-32) 20 25 mm (M5x0.8 or #10-32) 25 32 mm (G1/8 or 1/8” NPT) 32 40 mm (G1/8 or 1/8” NPT) 40 50 mm (G1/4 or 1/4” NPT) 50Stroke (enter exact stroke required in increments as indicated) see chartOptions None (blank) Auto Switch (Magnet) M Male Rod Thread T No Thread N PTFE Based Grease TG
Single Acting Models Max. Standard StrokesBore Metric Imperial 12 mm 5 to 20 mm 1/8” to 3/4” 16 mm 5 to 20 mm 1/8” to 3/4” 20 mm 5 to 30 mm 1/8” to 1” 25 mm 5 to 30 mm 1/8” to 1” 32 mm 5 to 30 mm 1/8” to 1” 40 mm 5 to 30 mm 1/8” to 1” 50 mm 5 to 30 mm 1/8” to 1”
Double Acting Models Max. Standard StrokesBore Metric Imperial 12 mm 5 to 30 mm 1/8” to 1” 16 mm 5 to 30 mm 1/8” to 1” 20 mm 5 to 50 mm 1/8” to 2” 25 mm 5 to 50 mm 1/8” to 2” 32 mm 5 to 100 mm 1/8” to 4” 40 mm 5 to100 mm 1/8” to 4” 50 mm 5 to 100 mm 1/8” to 4”
Stroke Options
Must be in 5 mm or 1/8” (0.125) increments
Example Part Numbers Metric: M-CQ2-BDR-20-15 (15 mm Stroke)
Imperial: CQ2-ADD-12-1.125 (1 1/8” Stroke)
SPECIFICATIONS
ORDER INFORMATION
3
Force FactorBore Direction Pressure in Bar Pressure in psig12 mm Extend 1.1 bar 0.2 psig Retract 0.8 bar 0.1 psig16 mm Extend 2.0 bar 0.3 psig Retract 1.5 bar 0.2 psig20 mm Extend 3.1 bar 0.5 psig Retract 2.4 bar 0.4 psig25 mm Extend 4.9 bar 0.8 psig Retract 3.8 bar 0.6 psig32 mm Extend 8.0 bar 1.2 psig Retract 6.0 bar 0.9 psig40 mm Extend 12.6 bar 1.9 psig Retract 10.6 bar 1.6 psig50 mm Extend 19.6 bar 3.0 psig Retract 16.5 bar 2.6 psig
Power Factor x bar = kg Power Factor x psig = pounds
ForceThe force required, operating air pressure and cylinder bore are all factors that must be determined or known when sizing an air cylinder. If two are known, the other is easily calculated per the formulas and triangle below.
Area is derived using either of the following formulas:
Diameter 2 x 0.7854 or Radius 2 x π
F - Force or load in pounds F = P x AP - Pressure P = F / AA - Area of cylinder A = F / P
F
P A
If you need a product that fits your application perfectly, Clippard has the capability to design or modify one of its products to suit your exact needs. We understand that a standard catalog product may be close but not be exactly what you need. Let us know YOUR Need, and we will help to find YOUR Solution!
CUSTOM ersolutions
4
Spring Forces (lbs.)
Compressed / At RestBore Size 5mm Stroke 10 mm Stroke 15 mm Stroke 20 mm Stroke 25 mm Stroke 30 mm Stroke 12 mm 1.8 / 1.3 1.8 / 0.8 1.7 / 0.8 1.7 / 0.5 16 mm 4 / 3.5 4 / 2.5 4 / 3 4 / 3 20 mm 5.5 / 4 5.5 / 2.5 5.5 / 4 5.5 / 3.5 5.5 / 3 5.5 / 2.5 25 mm 7 / 6 7 / 5 6.5 / 5 6.5 / 4.5 6.5 / 4 6.5 / 3.5 32 mm 13 / 11 13 / 10 11 / 9 11 / 8.5 11 / 7.5 11 / 7 40 mm 17 / 14 17 / 11 17 / 14 17 / 12 17 / 11 17 / 10 50 mm 22 / 19 22 / 15 23 / 19 23 / 17 23 / 16 23 / 15
Compressed / At RestBore Size 1/8” Stroke 1/4” Stroke 3/8” Stroke 1/2” Stroke 5/8” Stroke 3/4” Stroke 7/8” Stroke 1” Stroke12 mm 1.8 / 1.5 1.8 / 1.2 1.8 / 0.9 1.7 / 0.9 1.7 / 0.7 1.7 / 0.6 16 mm 4 / 3.5 4 / 3 4 / 3 4 / 3.5 4 / 3 4 / 3 20 mm 5.5 / 4.5 5.5 / 3.5 5.5 / 2.5 5.5 / 4 5.5 / 3.5 5.5 / 3.5 5.5 / 3 5.5 / 325 mm 7 / 6.5 7 / 6 7 / 5.5 6.5 / 5 6.5 / 5 6.5 / 4.5 6.5 / 4.5 6.5 / 432 mm 13 / 12 13 / 11 13 / 10 11 / 9 11 / 9 11 / 8.5 11 / 8 11 / 7.540 mm 17 / 15 17 / 13 17 / 11 17 / 14 17 / 13 17 / 13 17 / 12 17 / 1150 mm 22 / 20 22 / 18 22 / 16 23 / 20 23 / 19 23 / 18 23 / 17 23 / 16
Metric Series
Imperial Series
Clippard pneumatic cylinders that are equipped with an internal auto switch (magnet) can be used with the Reed Switch and GMR Sensor. By accurately sensing the magnetic field of the piston when it passes beneath the sensor, the position of the rod piston is determined, and the feedback signal is created. Use of this option may add to the overall length of the cylinder.
Reed Switch Part No. RPS-P3 Sourcing Switch with 3 m Wire LeadsRPS-P8Q Sourcing Switch with 8 mm Male QC 6” PigtailRPS-N3 Sinking Switch with 3 m Wire LeadsRPS-N8Q Sinking Switch with 8 mm Male QC 6” PigtailRPS-S3 Simple Switch (2-Wire) with 3 m Wire LeadsRPS-S8Q Simple Switch (2-Wire) with 8 mm Male QC 6” PigtailCPS-C8Q5 Mating Cable Assembly, 8 mm Female QC with 5 m Leads
GMR Switch Part No. GPS-P3 Sourcing Switch with 3 m Wire LeadsGPS-P8Q Sourcing Switch with 8 mm Male QC 6” PigtailGPS-N3 Sinking Switch with 3 m Wire LeadsGPS-N8Q Sinking Switch with 8 mm Male QC 6” PigtailCPS-C8Q5 Mating Cable Assembly, 8 mm Female QC with 5 m Leads
Quick Connector2-Wire QD Wiring 3-Wire QD Wiring
MAGNETIC PISTON OPTION “-M”
Characteristic/Type RPS-S GPS-N GPS-P RPS-N RPS-PSwitching Logic SPST Normally-Open Solid State Output, Solid State Output, SPST Normally-Open SPST Normally-Open Normally-Open Normally-OpenSensor Type Reed Switch NPN Current Sinking PNP Current Sourcing Reed Switch NPN Reed Switch PNPOperating Voltage RPS-S3: 5 to 120 VAC RPS-S8Q: 5 to 60 VAC/DCSwitching Current 100 mA max. 200 mA max. 200 mA max. 250 mA max. 250 mA max. Switching Rating 10 W max. 6 W max. 6 W max. 10 W max. 10 W max. Current Consumption - 7.5 mA max. @ 24 V 7.5 mA max. @ 24 V 10 mA max. @ 24 V 10 mA max. @ 24 V (Switch Active) (Switch Active) (Switch Active) (Switch Active)Voltage Drop 2.5 V max. @ 0.5 V max. @ 0.5 V max. @ 0.5 V max. @ 0.5 V max. @ 40 mA DC 200 mA 200 mA 550 mA 550 mA (Resistive Load) (Resistive Load) (Resistive Load) (Resistive Load)Leakage Current - 0.01 mA max. 0.01 mA max. - -Indicator Red LED Red LED Green LED Red LED Green LEDCable 2.8§, 2C, 2.8§, 3C, 2.8§, 3C, 2.8§, 3C, 2.8§, 3C, Oil-Resistant PVC Oil-Resistant PVC Oil-Resistant PVC Oil-Resistant PVC Oil-Resistant PVC Sensitivity 60 G 40 ~ 750 G 40 ~ 750 G 60 G 60 GMax. Switching Frequency 200 Hz 5,000 Hz 5,000 Hz 1,000 Hz 1,000 HzTemperature Range 14 to 158°F (-10 to 70°C) 14 to 158°F (-10 to 70°C) 14 to 158°F (-10 to 70°C) 14 to 158°F (-10 to 70°C) 14 to 158°F (-10 to 70°C)Shock 30 G 50 G 50 G 30 G 30 GVibration 9 G 9 G 9 G 9 G 9 GEnclosure Classification IP 67 (NEMA 6) IP 67 (NEMA 6) IP 67 (NEMA 6) IP 67 (NEMA 6) IP 67 (NEMA 6)Protection Circuit - Power Source Reverse Power Source Reverse - - Polarity; Surge Suppression Polarity; Surge Suppression
ORDER INFORMATION
5
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
12, 16, 20 & 25 mm Bore Sizes
Bore “H” “H1” “H3” “HL” “HS1” “L “L2” “RH” “TS” 12 mm 44.0 5.0 22.0 2.0 34.0 29.5 17.0 4.5 8.016 mm 48.0 5.0 24.0 2.0 38.0 33.5 19.0 4.5 8.020 mm 62.0 7.0 31.0 3.2 48.0 42.0 24.0 6.5 9.225 mm 66.0 7.0 33.0 3.2 52.0 46.0 26.0 6.5 10.7
Bore “H” “H1” “H3” “HL” “HS1” “L” “L2” “RH” “TS” 12 mm 1.732 0.197 0.866 0.078 1.339 1.161 0.669 0.177 0.31516 mm 1.890 0.197 0.945 0.078 1.496 1.319 0.748 0.177 0.31520 mm 2.441 0.276 1.220 0.125 1.890 1.654 0.945 0.256 0.36225 mm 2.598 0.276 1.299 0.125 2.047 1.811 1.024 0.256 0.421
“H”
“L”
”H1”
“L2”“HL”
“H3”
“RH” dia.thru 2 plcs
“HS1”
“TS”
FB-12MM-92FB-16MM-92FB-20MM-92FB-25MM-92
Order Part No. CQ2-(bore size)92
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
12, 16, 20 & 25 mm Bore Sizes with Auto Switch (Magnet)
Bore “H” “H1” “H3” “HL” “HS1” “L” “L2” “RH” “TS”12 mm 44.0 5.0 22.0 2.0 34.0 29.5 17.0 4.5 8.016 mm 48.0 5.0 24.0 2.0 38.0 33.5 19.0 4.5 8.020 mm 62.0 7.0 31.0 3.2 48.0 42.0 24.0 6.6 9.225 mm 66.0 7.0 33.0 3.2 52.0 46.0 26.0 6.6 10.7
Bore “H” “H1” “H3” “HL” “HS1” “L” “L2” “RH” “TS” 12 mm 1.732 0.197 0.866 0.078 1.339 1.161 0.669 0.177 0.31516 mm 1.890 0.197 0.945 0.078 1.496 1.319 0.748 0.177 0.31520 mm 2.441 0.276 1.220 0.125 1.890 1.654 0.945 0.260 0.36225 mm 2.598 0.276 1.299 0.125 2.047 1.811 1.024 0.260 0.421
“TS”
“HS1”
“HL”
“RH” dia.thru 2 plcs
“H1”
“L2”
“H3”
“L”
“H”
FB-12MM-91FB-16MM-91FB-20MM-91FB-25MM-91
Order Part No. CQ2-(bore size)91
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Bore “H” “H1” “H3” “HL” “HS1” “L” “L2” “RH” “TS”32 mm 71.0 7.0 35.5 3.2 57.0 20.0 13.0 6.6 11.240 mm 78.0 7.0 39.0 3.2 64.0 20.0 13.0 6.6 11.250 mm 95.0 8.0 47.5 3.2 79.0 22.0 14.0 8.5 11.2
Bore “H” “H1” “H3” “HL” “HS1” “L” “L2” “RH” “TS” 32 mm 2.795 0.276 1.398 0.125 2.244 0.787 0.512 0.260 0.44140 mm 3.071 0.276 1.535 0.125 2.520 0.787 0.512 0.260 0.44150 mm 3.740 0.315 1.870 0.125 3.110 0.866 0.551 0.335 0.480
32, 40 & 50 mm Bore Sizes
“HL”
“H3”
“H”
“L2”“TS”“RH” dia. thru 2 plcs
“L”
“H1”
“HS1”
FB-32MM-91FB-40MM-91FB-50MM-91
Order Part No. CQ2-(bore size)91
Bore Metric Imperial 12 mm M3x0.5 #5-4016 mm M3x0.5 #5-4020 mm M5x0.8 #10-3225 mm M5x0.8 #10-3232 mm M5x0.8 #10-3240 mm M5x0.8 #10-3250 mm M6x1.0 1/4-20 or 1/4-28
Mounting Hardware Rod Nuts
FOOT MOUNTING BRACKETS
Made of bright zinc plated steel, several styles of mounting brackets are available.
6
Metric Across Imperial AcrossBore Part No. Thread Flats Thickness Part No. Thread Flats Thickness12 mm NM5-080 M5x0.8 8 mm 4 mm NO2-32 #8-32 11/32” 1/8” 16 mm NM6-100 M6x1.0 10 mm 5 mm NO2-32 #8-32 11/32” 1/8”20 mm NM8-125 M8x1.25 12 mm 4 mm NO3-32 #10-32 3/8” 1/8”25 mm NM10-150 M10x1.25 17 mm 5 mm NO4-28A 1/4-28 7/16” 5/32”32 mm NM14-150 M14x1.5 22 mm 7 mm NO5-24 5/16-24 1/2” 3/16”40 mm NM14-150 M14x1.5 22 mm 7 mm NO6-24A 3/8-24 9/16” 7/32”50 mm NM18-150 M18x1.5 27 mm 9 mm N08-20 1/2-20 3/4” 5/16”
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N”12 mm 5-30 28 6 - - 7 M3x0.5-6 deep 5 3.5 22 3.516 mm 30.5 8 13.2 6.6 5.5 M4x0.7-8 deep 6 3.5 28 3.520 mm 31.5 10 13.6 6.8 5.5 M5x0.8-7 deep 8 4.5 36 5.525 mm 32.5 12 13.6 6.8 5.5 M6x1-12 deep 10 5 40 5.5
“M”“J”
“M”
thd. “H” (female)or “T” option
“W”
“L”+ stroke
“F”
2-“P”
“W1”
“MM”(male)
“Q”
“V” square
“D”
“S”
“EB”
“EA”
“M”
“U”
thd. “H” (female)or “T” option
“D” “M”
“V” square
8.0
“U”
“S”
12 bore
thd. “H” (female)or “T” option
16-25 bore
“F” “Q”
“L” + stroke “D” “M”
“ M”
thd. “H” (female)or “T” optiondia. “I”
“W1”
“W”
“MM”(male)
”W1”
“Q” “F”
“MM”(male)
“L” + stroke “W”
“X”
“X”
12-25 bore auto switch
“X”
“K” flats “K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs Mounting Options
A: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
“D”
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
counterbore“O” (4 plcs) counterbore
“O” (4 plcs)
“M”“J”
“M”
thd. “H” (female)or “T” option
“W”
“L”+ stroke
“F”
2-“P”
“W1”
“MM”(male)
“Q”
“V” square
“D”
“S”
“EB”
“EA”
“M”
“U”
thd. “H” (female)or “T” option
“D” “M”
“V” square
8.0
“U”
“S”
12 bore
thd. “H” (female)or “T” option
16-25 bore
“F” “Q”
“L” + stroke “D” “M”
“ M”
thd. “H” (female)or “T” optiondia. “I”
“W1”
“W”
“MM”(male)
”W1”
“Q” “F”
“MM”(male)
“L” + stroke “W”
“X”
“X”
12-25 bore auto switch
“X”
“K” flats “K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs Mounting Options
A: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
“D”
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
counterbore“O” (4 plcs) counterbore
“O” (4 plcs)
12 mm
Bore “O” “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm 6.5 x 3.5 deep M5x0.8 9 27 M5x0.8-9 long 14 25 14 M5x0.8-9 long 10.5 M4x0.7x7 deep16 mm 6.5 x 3.5 deep 9.5 29.5 M6x1.0-10 long 15 29 15.5 M6x1-10 long 12 M4x0.7-7 deep 20 mm 9 x 7 deep 8 35.5 M8x1.25-12 long 18 36 18.5 M8x1.25-12 long 14 M6x1-10 deep 25 mm 9 x 7 deep 9 40.5 M10x1.5-15 long 21 40 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
“M”“J”
“M”
thd. “H” (female)or “T” option
“W”
“L”+ stroke
“F”
2-“P”
“W1”
“MM”(male)
“Q”
“V” square
“D”
“S”
“EB”
“EA”
“M”
“U”
thd. “H” (female)or “T” option
“D” “M”
“V” square
8.0
“U”
“S”
12 bore
thd. “H” (female)or “T” option
16-25 bore
“F” “Q”
“L” + stroke “D” “M”
“ M”
thd. “H” (female)or “T” optiondia. “I”
“W1”
“W”
“MM”(male)
”W1”
“Q” “F”
“MM”(male)
“L” + stroke “W”
“X”
“X”
12-25 bore auto switch
“X”
“K” flats “K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs Mounting Options
A: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
“D”
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
counterbore“O” (4 plcs) counterbore
“O” (4 plcs)
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N”12 mm 0.125-1.000 1.102 0.236 - - 0.276 #6-32-0.236 deep 0.197 0.138 0.866 0.13816 mm 0.125-1.000 1.201 0.315 0.520 0.260 0.217 #6-32-0.315 deep 0.236 0.138 1.102 0.13820 mm 0.125-2.000 1.240 0.394 0.535 0.268 0.217 #10-32-0.276 deep 0.315 0.177 1.417 0.21725 mm 0.125-2.000 1.280 0.472 0.535 0.268 0.217 1/4-28-0.472 deep 0.394 0.197 1.575 0.217
Bore “O” “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm 0.256 x 0.138 deep #10-32 0.354 1.063 #8-32 0.552 0.984 0.552 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.256 x 0.138 deep 0.374 1.161 #8-32 0.590 1.142 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.354 x 0.276 deep 0.315 1.398 #10-32 0.709 1.417 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 x 0.276 deep 0.354 1.594 1/4-28 0.826 1.575 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
16-20-25 mm
DOUBLE-ACTING, ROTATING ROD WITH AUTO SWITCH (MAGNET) - XDR SERIES
12, 16, 20 & 25 mm Bore Sizes
7
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
“M”“J”
“M”
thd. “H” (female)or “T” option
“W”
“L”+ stroke
“F”
2-“P”
“W1”
“MM”(male)
“Q”
“V” square
“D”
“S”
“EB”
“EA”
“M”
“U”
thd. “H” (female)or “T” option
“D” “M”
“V” square
8.0
“U”
“S”
12 bore
thd. “H” (female)or “T” option
16-25 bore
“F” “Q”
“L” + stroke “D” “M”
“ M”
thd. “H” (female)or “T” optiondia. “I”
“W1”
“W”
“MM”(male)
”W1”
“Q” “F”
“MM”(male)
“L” + stroke “W”
“X”
“X”
12-25 bore auto switch
“X”
“K” flats “K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs Mounting Options
A: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
“D”
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
counterbore“O” (4 plcs) counterbore
“O” (4 plcs)
Bore Stroke “L” “D” “F” “H” “I” “W” “M” “N” 12 mm 5-30 17 6 5 M3x0.5-6 deep 32 3.5 15.5 3.5 16 mm 18.5 8 5.5 M4x0.7-8 deep 38 3.5 20 3.5 20 mm 19.5 10 5.5 M5x0.8-7 deep 47 4.5 25.5 5.5 25 mm 22.5 12 5.5 M6x1-12 deep 52 5 28 5.5
Bore “O” “P” “T” “Q” “Z” “W1” “MM” “X” “O1”12 mm 6.5 x 3.5 deep M5x0.8 M5x0.8-9 long 7.5 - 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 6.5 x 3.5 deep M6x1.0-10 long 8 10 15. M6x1-10 long 12 M4x0.7-7 deep20 mm 9 x 7 deep M8x1.25-12 long 8 10 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 x 7 deep M10x1.5-15 long 9 10 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
Bore Stroke “L” “D” “F” “H” “I” “W” “M” “N” 12 mm 0.125-1.000 0.669 0.236 0.197 #6-32-0.236 deep 1.260 0.138 0.610 0.138 16 mm 0.125-1.000 0.728 0.315 0.217 #6-32-0.315 deep 1.496 0.138 0.787 0.138 20 mm 0.125-2.000 0.768 0.394 0.217 #10-32-0.276 deep 1.850 0.177 1.004 0.217 25 mm 0.125-2.000 0.886 0.472 0.217 1/4-28-0.472 deep 2.047 0.197 1.102 0.217
Bore “O” “P” “Q” “T” “W1” “MM” “X” “O1”12 mm 0.256 x 0.138 deep #10-32 0.295 #8-32 0.552 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.256 x 0.138 deep 0.315 #8-32 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.354 x 0.276 deep 0.315 #10-32 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 x 0.276 deep 0.354 1/4-28 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
DOUBLE-ACTING, ROTATING ROD - XDR SERIES
12, 16, 20 & 25 mm Bore Sizes
8
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
without Switch with SwitchBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” “W” 5 23 6.5 7.5 33 6.5 7.5 16 M8x1.25-13 deep 4.5 14 732 mm 10-50 23 7.5 10 33 7.5 10 50-100 33 7.5 10 33 7.5 10 5 29.5 8 11 39.5 8 11 16 M8x1.25-13 deep 5 14 740 mm 10-50 29.5 7.5 12.5 39.5 7.5 12.5 50-100 39.5 7.5 12.5 39.5 7.5 12.5 5 30.5 9 9 40.5 9 9 20 M10x1.5-15 deep 7 17 850 mm 10-50 30.5 10.5 10.5 40.5 10.5 10.5 50-100 40.5 10.5 10.5 40.5 10.5 10.5
“M”“J”
“M”
thd. “H” (female)or “T” option
“W”
“L”+ stroke
“F”
2-“P”
“W1”
“MM”(male)
“Q”
“V” square
“D”
“S”
“EB”
“EA”
“M”
“U”
thd. “H” (female)or “T” option
“D” “M”
“V” square
8.0
“U”
“S”
12 bore
thd. “H” (female)or “T” option
16-25 bore
“F” “Q”
“L” + stroke “D” “M”
“ M”
thd. “H” (female)or “T” optiondia. “I”
“W1”
“W”
“MM”(male)
”W1”
“Q” “F”
“MM”(male)
“L” + stroke “W”
“X”
“X”
12-25 bore auto switch
“X”
“K” flats “K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs Mounting Options
A: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
“D”
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
counterbore“O” (4 plcs) counterbore
“O” (4 plcs)
Bore “M” “N” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 34 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep40 mm 40 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep50 mm 50 6.6 11 x 8 deep G1/4 M18x1.5-26 long 33.5 M18x1.5-25.5 long 28.5 M8x1.25-14 deep
without Switch with SwitchBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” “W” 0.125 0.906 0.256 0.295 1.299 0.256 0.295 0.630 5/16-24-0.512 deep 0.177 0.551 0.27532 mm 0.250-2.000 0.906 0.295 0.394 1.299 0.295 0.394 2.125-4.000 1.299 0.295 0.394 1.299 0.295 0.394 0.125 1.161 0.315 0.433 1.555 0.315 0.433 0.630 3/8-24-0.512 deep 0.197 0.551 0.27540 mm 0.250-2.000 1.161 0.295 0.492 1.555 0.295 0.492 2.125-4.000 1.555 0.295 0.492 1.555 0.295 0.492 0.125 1.201 0.354 0.354 1.594 0.354 0.354 0.787 1/2-20-0.591 deep 0.275 0.669 0.31550 mm 0.250-2.000 1.201 0.413 0.413 1.594 0.413 0.413 2.125-4.000 1.594 0.413 0.413 1.594 0.413 0.413
Bore “N” “M” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 1.339 0.217 0.354 x 0.276 deep 1/8” NPT 5/16-24 1.123 5/16-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep40 mm 1.575 0.217 0.354 x 0.276 deep 1/8” NPT 3/8-24 1.123 3/8-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep50 mm 1.969 0.260 0.433 x 0.315 deep 1/4” NPT 1/2-20 1.319 1/2-20-1.004 long 1.122 5/16-18 UNC-2B- 0.551 deep
DOUBLE-ACTING, ROTATING ROD - XDR SERIES
32, 40 & 50 mm Bore Sizes
9
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
16-20-25 mm 12 mm
Bore Stroke “L” “D” “EA” “EB” “H” “K” “W” “M” “N” “O”12 mm 5-30 32.4 6 - - M3x0.5-6 deep 5 3.5 22 3.5 6.5 x 3.5 deep16 mm 36 8 13.2 6.6 M4x0.7-8 deep 6 3.5 28 3.5 6.5 x 3.5 deep20 mm 38 10 13.6 6.8 M5x0.8-7 deep 8 4.5 36 5.5 9 x 7 deep25 mm 39 12 13.6 6.8 M6x1-12 deep 10 5 40 5.5 9 x 7 deep
Bore “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm M5x0.8 9 27 M5x0.8-9 long 14 25 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 9.5 29.5 M6x1.0-10 long 15 29 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 8 35.5 M8x1.25-12 long 18 36 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 40.5 M10x1.5-15 long 21 40 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
Bore Stroke “L” “D” “EA” “EB” “H” “K” “W” “M” “N” “O”12 mm 0.125-1.000 1.276 0.236 - - #6-32-0.236 deep 0.197 0.138 0.866 0.138 0.256 x 0.138 deep16 mm 0.125-1.000 1.417 0.315 0.520 0.260 #6-32-0.315 deep 0.236 0.138 1.102 0.138 0.256 x 0.138 deep20 mm 0.125-2.000 1.496 0.394 0.535 0.268 #10-32-0.276 deep 0.315 0.177 1.417 0.217 0.354 x 0.276 deep25 mm 0.125-2.000 1.535 0.472 0.535 0.268 1/4-28-0.472 deep 0.394 0.197 1.575 0.217 0.354 x 0.276 deep
Bore “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm #10-32 0.354 1.063 #8-32 0.551 0.984 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.374 1.161 #8-32 0.590 1.142 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.315 1.398 #10-32 0.709 1.417 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 1.594 1/4-28 0.826 1.575 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
DOUBLE-ACTING, DOUBLE ROD WITH AUTO SWITCH (MAGNET) - XDD SERIES
12, 16, 20 & 25 mm Bore Sizes
10
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Bore Stroke “L” “D” “H” “I” “K” “W” “M” “N” “O”12 mm 5-30 25.2 6 M3x0.5-6 deep 32 5 3.5 15.5 3.5 6.5 x 3.5 deep16 mm 26 8 M4x0.7-8 deep 38 6 3.5 20 3.5 6.5 x 3.5 deep20 mm 26 10 M5x0.8-7 deep 47 8 4.5 25.5 5.5 9 x 7 deep25 mm 29 12 M6x1-12 deep 52 10 5 28 5.5 9 x 7 deep
Bore “P” “Q” “T” “W1” “MM” “X” “O1”12 mm M5x0.8 9 M5X0.8-9 long 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 9.5 M6x1.0-10 long 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 8 M8x1.25-12 long 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 M19x1.5-15 long 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
Bore Stroke “L” “D” “H” “I” “K” “W” “M” “N” “O”12 mm 0.125-1.000 0.992 0.236 #6-32-0.236 deep 1.260 0.197 0.138 0.610 0.138 0.256 x 0.138 deep16 mm 0.125-1.000 1.024 0.315 #6-32-0.315 deep 1.496 0.236 0.138 0.787 0.138 0.256 x 0.138 deep20 mm 0.125-2.000 1.024 0.394 #10-32-0.276 deep 1.850 0.315 0.177 1.004 0.217 0.354 x 0.76 deep25 mm 0.125-2.000 1.142 0.472 1/4-28-0.472 deep 2.047 0.394 0.197 1.102 0.217 0.354 x 0.276 deep
Bore “P” “Q” “T” “W1” “MM” “X” “O1”12 mm #10-32 0.354 #10-32 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.374 #10-32 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.315 #10-32 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 #10-32 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
DOUBLE-ACTING, DOUBLE ROD - XDD SERIES
12, 16, 20 & 25 mm Bore Sizes
11
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Without With Switch SwitchBore Stroke “L” “L” “D” “H” “J” “K” “W” “M” “N”32 mm 5-50 30.5 40.5 16 M8x1.25-13 deep 4.5 14 7 34 5.5 50-100 40.5 40 mm 5-50 40 50 16 M8x1.25-13 deep 5 14 7 40 5.5 50-100 50 50 mm 5-50 40.5 50.5 20 M10x1.5-15 deep 7 17 8 50 6.6 50-100 50.5
Bore “O” “P” “Q” “T” “W1” “MM” “X” “O132 mm 9 x 7 deep G1/8 10 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep40 mm 9 x 7 deep G1/8 13 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep50 mm 11 x 8 deep G1/4 13.5 M18x1.5-26 long 33.5 M18x1.5-25.5 long 28.5 M8x1.25-14 deep
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
“W1” “L” + stroke “W1” + stroke
“X” “X”
“Q” “Q”
“MM”(male)
“MM”(male)
“W”
“V” square
“D”
“EA” “EB”
“S”
“M”
“U”
thd. “H” (female)or “T” option
8.0
“U”
“S”
“D” “M”
“V” square
thd. “H” (female)or “T” option
“W” + stroke “X”
“W1” “L” + stroke “W1” + stroke
“X”
“Q”typ.
“MM”(male)
“MM”(male)
“W”
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
“W” “W” + stroke
“X”
“W1” “L” + stroke
“X”
“W1” + stroke
“Q”
“MM”(male)
“MM”(male)
2-”P”
“M” “J”
“M”
“D”
thd. “H” (female)or “T” option
“K” �ats
“K” �ats
“K” �ats2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“M”
“M”
“D”
“I” dia.
thd. “H” (female)or “T” option
counterbore“O” (4 plcs)
Without With Switch SwitchBore Stroke “L” “L” “D” “H” “J” “K” “W” “M” “N”32 mm 0.125-2.000 1.201 1.594 0.630 5/16-24-0.512 deep 0.177 0.551 0.275 1.339 0.217 2.125-4.000 1.594 40 mm 0.125-2.000 1.575 1.969 0.630 3/8-24-0.512 deep 0.197 0.551 0.275 1.575 0.217 2.125-4.000 1.969 50 mm 0.125-2.000 1.594 1.988 0.787 1/2-20-0.591 deep 0.275 0.669 0.315 1.969 0.260 2.125-4.000 1.988
Bore “O” “P” “Q” “T” “W1” “MM” “X” “O1”32 mm 0.354 x 0.276 deep 1/8” NPT 0.394 5/16-24 1.123 5/16-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep40 mm 0.354 x 0.276 deep 1/8” NPT 0.512 3/8-24 1.123 3/8-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep50 mm 0.433 x 0.315 deep 1/4” NPT 0.531 1/2-20 1.319 1/2-20-1.004 long 1.122 /16-18 UNC-2B -0.551 deep
DOUBLE-ACTING, DOUBLE ROD - XDD SERIES
32, 40 & 50 mm Bore Sizes
12
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N” “Q”12 mm 5-10 38 6 - - 7 M3x0.5-6 deep 5 3.5 22 3.5 9 15-20 4816 mm 5-10 40.5 8 13.2 6.6 5.5 M4x0.7-8 deep 6 3.5 28 3.5 9.5 15-20 50.520 mm 5-10 41.5 10 13.6 6.8 5.5 M5x0.8-7 deep 8 4.5 36 5.5 8 15-30 51.5 25 mm 5-10 42.5 12 13.6 6.8 5.5 M6x1-12 deep 10 5 40 5.5 9 15-30 52.5
Bore “O” “P” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm 6.5 x 3.5 deep M5x0.8 27 M5x0.8-9 long 14 25 14 M5x0.8-9 long 10.5 M4x0.7-7 deep 16 mm 6.5 x 3.5 deep 29.5 M6x1.0-10 long 15 29 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 9 x 7 deep 35.5 M8x1.25-12 long 18 36 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 x 7 deep 40.5 M10x1.5-15 long 21 40 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
16-20-25 mm12 mm
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N” “Q”12 mm 0.125-0.375 1.496 0.236 - - 0.276 #6-32-0.236 deep 0.197 0.138 0.866 0.138 0.354 0.500-0.750 1.890 16 mm 0.125-0.375 1.595 0.315 0.520 0.260 0.217 #6-32-0.315 deep 0.236 0.138 1.102 0.138 0.374 0.500-0.750 1.988 20 mm 0.125-0.375 1.634 0.394 0.535 0.268 0.217 #10-32-0.276 deep 0.315 0.177 1.417 0.217 0.315 0.500-1.000 2.028 25 mm 0.125-1.000 1.673 0.472 0.535 0.268 0.217 1/4-28-0.472 deep 0.394 0.197 1.575 0.217 0.354 0.500-1.000 2.067
Bore “O” “P” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm 0.256 x 0.138 deep #10-32 1.063 #10-32 0.551 0.984 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.256 x 0.138 deep 1.161 #10-32 0.590 1.142 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.354 x 0.276 deep 1.398 #10-32 0.709 1.417 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 x 0.276 deep 1.594 #10-32 0.826 1.575 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
SINGLE-ACTING, SPRING EXTENDED, ROTATING ROD WITH AUTO SWITCH (MAGNET) - XRR
12, 16, 20 & 25 mm Bore Sizes
13
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Bore Stroke “L” “D” “F” “H” “I” “K” “W” “M” “N”12 mm 5-10 27 6 5 M3x0.5-6 deep 32 5 3.5 15.5 3.5 15-20 37 16 mm 5-10 28.5 8 5.5 M4x0.7-8 deep 38 6 3.5 20 3.5 15-20 38.520 mm 5-10 29.5 10 5.5 M5x0.8-7 deep 47 8 4.5 25.5 5.5 15-30 39.5 25 mm 5-10 32.5 12 5.5 M6x1-12 deep 52 10 5 28 5.5 15-30 42.5
Bore “O” “P” “Q” “T” “W1” “MM” “X” “O1”12 mm 6.5 x 3.5 deep M5x0.8 7.5 M5x0.8-9 long 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 6.5 x 3.5 deep 8 M6x1.0-10 long 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 9 x 7 deep 8 M8x1.25-12 long 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 x 7 deep 9 M10x1.5-15 long 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
Bore Stroke “L” “D” “F” “H” “I” “K” “W” “M” “N”12 mm 0.125-0.375 1.063 0.236 0.197 #6-32-0.236 deep 1.260 0.197 0.138 0.610 0.138 0.500-0.750 1.45716 mm 0.125-0.375 1.122 0.315 0.217 #6-32-0.315 deep 1.496 0.236 0.138 0.787 0.138 0.500-0.750 1.51520 mm 0.125-0.375 1.161 0.394 0.217 #10-32-0.276 deep 1.850 0.315 0.177 1.004 0.217 0.500-1.000 1.55525 mm 0.125-0.375 1.280 0.472 0.217 1/4-28-0.472 deep 2.047 0.394 0.197 1.102 0.217 0.500-1.000 1.673
Bore “O” “P” “Q” “T” “W1” “MM” “X” “O1”12 mm 0.256 x 0.138 deep #10-32 0.295 #10-32 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.256 x 0.138 deep 0.315 #10-32 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.354 x 0.276 deep 0.315 #10-32 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 x 0.276 deep 0.354 #10-32 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
SINGLE-ACTING, SPRING EXTENDED, ROTATING ROD - XRR SERIES
12, 16, 20 & 25 mm Bore Sizes
14
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Without Swith With SwitchBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” 5 33 6.5 7.5 43 6.5 7.5 16 M8x1.25-13 deep 4.5 1432 mm 10 33 7.5 10 43 7.5 10 15-30 43 7.5 10 53 7.5 10 5 39.5 8 11 49.5 8 11 16 M8x1.25-13 deep 5 1440 mm 10 39.5 7.5 12.5 49.5 7.5 12.5 15-30 49.5 7.5 12.5 59.5 7.5 12.5 5 40.5 9 9 50.5 9 9 20 M10x1.5-15 deep 7 1750 mm 10 40.5 10.5 10.5 50.5 10.5 10.5 15-30 50.5 10.5 10.5 60.5 10.5 10.5
Bore “W” “M” “N” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 7 34 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep40 mm 7 40 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep50 mm 8 50 6.6 11 x 8 deep G1/4 M18x1.5-26 long 33.5 M18x1.5-25.5 long 28.5 M8x1.25-14 deep
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
thd. “H” (female)or “T” option
“L” + stroke
“W” + stroke
“F” “Q”
“V” square
“D”
“EA”
“S”
“EB”
“U”
“M”
16~ 25
“M”“D”
8.0
“S”
“U”
“V” square
12
thd. “H” (female)or “T” option
“X”
“W1” + stroke
“MM”(male)
Auto Switch12-25
Auto Switch
Auto Switch
“Q”
“W” + stroke
“L” + stroke
“F”
“W1” + stroke
“X”
“MM”(male)
Non-Auto Switch (12-25)
“Z” “E” “M”
“M” “D”
“I” dia.
thd. “H” (female)or “T” option
“M”
“E” “Y”
“J”
“Z” “M”
“E”
“X”
“Q” “F”
2-”P”
thd. “H” (female)or “T” option
“MM”(male)
“L” + stroke “W1” + stroke
“W” + stroke
“D”
“K” flats
“K” flats
“K” flats
2-“P”
2-“P”
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
counterbore“O” (8 plcs)
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
Without Switch With SwitchBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” 0.125 1.299 0.256 0.295 1.693 0.256 0.295 0.630 5/16-24-0.512 deep 0.177 0.551 32 mm 0.250-0.375 1.299 0.295 0.394 1.693 0.295 0.394 0.500-1.000 1.693 0.295 0.394 2.087 0.295 0.394 0.125 1.555 0.315 0.433 1.949 0.315 0.433 0.630 3/8-14-0.512 deep 0.197 0.55140 mm 0.250-0.375 1.555 0.295 0.492 1.949 0.295 0.492 0.500-1.000 1.949 0.295 0.492 2.343 0.295 0.492 0.125 1.594 0.354 0.354 1.988 0.354 0.354 0.787 1/2-20-0.591 deep 0.275 0.66950 mm 0.250-0.375 1.594 0.413 0.413 1.988 0.413 0.413 0.500-1.000 1.988 0.413 0.413 2.382 0.413 0.413
Bore “W” “M” “N” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 0.275 1.339 0.217 0.354 x 0.276 deep 1/8” NPT 1/8” NPT 1.123 5/16-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep40 mm 0.275 1.575 0.217 0.354 x 0.276 deep 1/8” NPT 1/8” NPT 1.123 3/8-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep50 mm 0.315 1.969 0.260 0.433 x 0.315 deep 1/4” NPT 1/4” NPT 1.319 1/2-20-1.004 long 1.122 5/16-18 UNC-2B-0.551 deep
SINGLE-ACTING, SPRING EXTENDED, ROTATING ROD - XRR SERIES
32, 40 & 50 mm Bore Sizes
15
Metric Series (dimensions in mm)
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N” “O”12 mm 5-10 38 6 - - 7 M3x0.5-6 deep 5 3.5 22 3.5 6.5 x 3.5 deep 15-20 4816 mm 5-10 40.5 8 13.2 6.6 5.5 M4x0.7-8 deep 6 3.5 28 3.5 6.5 x 3.5 deep 15-20 50.520 mm 5-10 41.5 10 13.6 6.8 5.5 M5x0.8-7 deep 8 4.5 36 5.5 9 x 7 deep 15-30 51.525 mm 5-10 42.5 12 13.6 6.8 5.5 M6x1-17 deep 10 5 40 5.5 9 x 7 deep 15-30 52.5
Bore Stroke “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm 5-10 / 15-20 M5x0.8 9 27 M5x0.8-9 long 14 25 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 5-10 / 15-20 9.5 29.5 M6x1.0-10 long 15 29 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 5-10 / 15-30 8 35.5 M8x1.25-12 long 18 36 18.5 M8x1.25-12 long 14 M6x1-10 deep 25 mm 5-10 / 15-30 9 40.5 M10x1.5-15 long 21 40 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
16-20-25 mm12 mm
Bore “P” “Q” “S” “T” “U” “V” “W1” “MM” “X” “O1”12 mm #10-32 0.354 1.063 #10-32 0.551 0.984 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.374 1.161 #10-32 0.590 1.142 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.315 1.398 #10-32 0.709 1.417 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 1.594 #10-32 0.826 1.575 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
Imperial Series (dimensions in inches)
Bore Stroke “L” “D” “EA” “EB” “F” “H” “K” “W” “M” “N” “O”12 mm 0.125-0.375 1.496 0.236 - - 0.276 #6-32-0.236 deep 0.197 0.138 0.866 0.138 0.256 x 0.138 deep 0.500-1.000 1.89016 mm 0.125-0.375 1.594 0.315 0.520 0.260 0.217 #6-32-0.315 deep 0.236 0.138 1.102 0.138 0.256 x 0.138 deep 0.500-1.000 1.98820 mm 0.125-0.375 1.634 0.394 0.535 0.268 0.217 #10-32-0.276 deep 0.315 0.177 1.417 0.217 0.354 x 0.276 deep 0.500-1.000 2.02825 mm 0.125-0.375 1.673 0.472 0.535 0.268 0.217 1/4-28-0.472 deep 0.394 0.197 1.575 0.217 0.354 x 0.276 deep 0.500-1.000 2.067
SINGLE-ACTING, SPRING RETURN, ROTATING ROD WITH AUTO SWITCH (MAGNET) - XSR
12, 16, 20 & 25 mm Bore Sizes
16
Bore “P” “Q” “T” “W1” “MM” “X” “O1”12 mm M5x0.8 7.5 M5x0.8-9 long 14 M5x0.8-9 long 10.5 M4x0.7-7 deep16 mm 8 M6x1.0-10 long 15.5 M6x1-10 long 12 M4x0.7-7 deep20 mm 8 M8x1.25-12 long 18.5 M8x1.25-12 long 14 M6x1-10 deep25 mm 9 M10x1.5-15 long 22.5 M10x1.25-15 long 17.5 M6x1-10 deep
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
Bore “P” “Q” “T” “W1” “MM” “X” “O1”12 mm #10-32 0.295 #10-32 0.551 #8-32-0.356 long 0.413 #8-32 UNC-2B-0.276 deep16 mm 0.315 #10-32 0.610 #8-32-0.394 long 0.472 #8-32 UNC-2B-0.276 deep20 mm 0.315 #10-32 0.728 #10-32-0.472 long 0.551 1/4-20 UNC-2B-0.394 deep25 mm 0.354 #10-32 0.886 1/4-28-0.591 long 0.689 1/4-20 UNC-2B-0.394 deep
Metric Series (dimensions in mm)
Bore Stroke “L” “D” “F” “H” “I” “K” “W” “M” “N” “O”12 mm 5-10 27 6 5 M3x0.5-6 deep 32 5 3.5 15.5 3.5 6.5 x 3.5 deep 15-20 3716 mm 5-10 28.5 8 5.5 M4x0.7-8 deep 38 6 3.5 20 3.5 6.5 x 3.5 deep 15-20 38.520 mm 5-10 29.5 10 5.5 M5x0.8-7 deep 47 8 4.5 25.5 5.5 9 x 7 deep 15-30 39.525 mm 5-10 32.5 12 5.5 M6x1-12 deep 52 10 5 28 5.5 9 x 7 deep 15-30 42.5
Imperial Series (dimensions in inches)
Bore Stroke “L” “D” “F” “H” “I” “K” “W” “M” “N” “O”12 mm 0.125-0.375 1.063 0.236 0.197 #6-32-0.236 deep 1.260 0.197 0.138 0.610 0.138 0.256 x 0.138 deep 0.500-0.750 1.45716 mm 0.125-0.375 1.122 0.315 0.217 #6-32-0.315 deep 1.496 0.236 0.138 0.787 0.138 0.256 x 0.138 deep 0.500-0.750 1.51520 mm 0.125-0.375 1.161 0.394 0.217 #10-32-0.276 deep 1.850 0.315 0.177 1.004 0.217 0.354 x 0.276 deep 0.500-1.000 1.555 25 mm 0.125-0.375 1.280 0.472 0.217 1/4-28-0.472 deep 2.047 0.394 0.197 1.102 0.217 0.354 x 0.276 deep 0.500-1.000 1.673
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
SINGLE-ACTING, SPRING RETURN, ROTATING ROD - XSR SERIES
12, 16, 20 & 25 mm Bore Sizes
17
Metric Series (dimensions in mm)
Imperial Series (dimensions in inches)
Without Switch With SwitchBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” 5 33 6.5 7.5 43 6.5 7.5 16 M8x1.25-13 deep 4.5 14 32 mm 10 33 7.5 10 43 7.5 10 15-30 43 7.5 10 53 7.5 10 5 39.5 8 11 49.5 8 11 16 M8x1.25-13 deep 5 1440 mm 10 39.5 7.5 12.5 49.5 7.5 12.5 15-30 49.5 7.5 12.5 59.5 7.5 12.5 5 40.5 9 9 50.5 9 9 20 M10x1.5-15 deep 7 1750 mm 10 40.5 10.5 10.5 50.5 10.5 10.5 15-30 50.5 10.5 10.5 60.5 10.5 10.5
Bore “W” “M” “N” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 7 34 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep40 mm 7 40 5.5 9 x 7 deep G1/8 M14x1.5-20.5 long 28.5 M14x1.5-20.5 long 23.5 M6x1-10 deep50 mm 8 50 6.6 11 x 8 deep G1/4 M18x1.5-26 long 33.5 M18x1.5-25.5 long 28.5 M8x1.25-14 deep
“W”
“F” “Q”
“X”
“W1” “L” + stroke
“MM”(male)
“EB”
“EA”
“V” square
“D”
“S”
“M”
“U”
16~25
“D”
“U”
“S”
8.0
“M”
thd. “H” (female)or “T” option
12
“V” square
thd. “H” (female)or “T” option
“X”
“W1”
“MM”(male)
“W”
“L” + stroke
“M”
“M”
“D”
thd. “H” (female)or “T” option
32-50
“D” “M”
“M”
“I” dia.thd. “H” (female)or “T” option
“L” + stroke
“W”
“F” “Q”
“W1”
“X”
“MM”(male)
“K” flats
“K” flats
“K” flats
“F” “Q”
2-“P”
2-“P”
2-“P”Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 2 plcs both endsB: “N” thru hole 2 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
Mounting OptionsA: “O1” 4 plcs both endsB: “N” thru hole 4 plcs
counterbore“O” (4 plcs)
counterbore“O” (4 plcs)
counterbore“O” (8 plcs)
counterbore“O” (8 plcs)
Without Magnet With MagnetBore Stroke “L” “F” “Q” “L” “F” “Q” “D” “H” “J” “K” 0.125 1.299 0.256 0.295 1.693 0.256 0.295 0.630 5/16-24-0.512 deep 0.177 0.55132 mm 0.250-0.375 1.299 0.295 0.394 1.693 0.295 0.394 0.500-1.000 1.693 0.295 0.394 2.087 0.295 0.394 0.125 1.555 0.315 0.433 1.949 0.315 0.433 0.630 3/8-24-0.512 deep 0.197 0.55140 mm 0.250-0.375 1.555 0.295 0.492 1.949 0.295 0.492 0.500-1.000 1.949 0.295 0.492 2.343 0.295 0.492 0.125 1.594 0.354 0.354 1.988 0.354 0.354 0.787 1/2-20-0.591 deep 0.275 0.66950 mm 0.250-0.375 1.594 0.413 0.413 1.988 0.413 0.413 0.500-1.000 1.988 0.413 0.413 2.382 0.413 0.413
Bore “W” “M” “N” “O” “P” “T” “W1” “MM” “X” “O1”32 mm 0.275 1.339 0.217 0.354 x 0.276 deep 1/8” NPT 1/8” NPT 1.123 5/16-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep 40 mm 0.275 1.575 0.217 0.354 x 0.276 deep 1/8” NPT 1/8” NPT 1.123 3/8-24-0.807 long 0.925 1/4-20 UNC-2B-0.394 deep50 mm 0.315 1.969 0.260 0.433 x 0.315 deep 1/4” NPT 1/4” NPT 1.319 1/2-20-1.004 long 1.122 5/16-18 UNC-2B-0.551 deep
SINGLE-ACTING, SPRING RETURN, ROTATING ROD - XSR SERIES
32, 40 & 50 mm Bore Sizes
18
19
o 303/304 Stainless Steel Rolled Construction Series
o 303 All Stainless Steel Rolled Construction Series
o Corrosion-Resistant 303 Stainless Steel Rolled Construction Line
o Air Force One® Compact 303 Stainless Series
o Brass Rolled Construction Line
o Stainless & Polypropylene Air Volume Tanks
For the past 60 years, Clippard has been providing quality cylinders for thousands of applications around the world. Cylinders that are responsible for millions of production cycles. Cylinders that provide outstanding performance and payback.
PNEUMATIC CYLINDERS
Performance that Engineers have Learned to Trust!
14 Bore SizesIntroduced in the Early 1950’s2D Drawings & 3D ModelsProudly Made in the USARoHS CompliantISO 9001:2015Competitive Interchange GuidesThousands of Models Ship the Same Day
CLIPPARD INSTRUMENT LABORATORY, INC.7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • 513-521-4261 • www.clippard.com
Technical Data Bulletin 10.16
PROFESSIONALLY DISTRIBUTED BY: