UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant...
-
Upload
nancy-horn -
Category
Documents
-
view
243 -
download
0
description
Transcript of UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant...
![Page 1: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/1.jpg)
UNIT III Bulk Deformation Process
![Page 2: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/2.jpg)
Bulk Deformation Processes
• Characterized by significant deformations and
massive shape changes
• "Bulk" refers to workparts with relatively low
surface area‑to‑volume ratios
• Starting work shapes include cylindrical billets
and rectangular bars
![Page 3: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/3.jpg)
• A product is produced by shaping the metal into required
shape and size.
• In this method “no machining process “ is carried out .
• The deformation is obtained by applying the force, the
metal is plastically deformed into required shape.
![Page 4: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/4.jpg)
Advantages of bulk deformation process
• Reduces the cavities present in the metal.
• Wastage of material is negligible.
• Production is high when compared to other
manufaturing processes.
![Page 5: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/5.jpg)
Bulk Deformation Processes
Rolling: Compressive deformation process in which the thickness of a plate is reduced by squeezing it through two rotating cylindrical rolls.
![Page 6: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/6.jpg)
Forging: The workpiece is compressed between two opposing dies so that the die shapes are imparted to the work.
![Page 7: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/7.jpg)
Drawing: The diameter of a wire or bar is reduced by pulling it through a die opening (bar drawing) or a series of die openings (wire drawing)
![Page 8: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/8.jpg)
Extrusion: The work material is forced to flow through a die opening taking its shape
![Page 9: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/9.jpg)
Swaging Process that reduces/increases the diameter, tapers, rods or points round bars or tubes by external hammering
![Page 10: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/10.jpg)
• Cold Forging Process in which slugs of material are squeezed into shaped die cavities to produce finished parts of precise shape and size.
![Page 11: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/11.jpg)
• Sizing Process of squeezing all or selected areas of forgings, ductile castings, or powder metallurgy products to achieve a desired thickness or precision
![Page 12: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/12.jpg)
• Riveting Process where a head is formed on the shrank end of a fastener to permanently join sheets or plates of material;
![Page 13: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/13.jpg)
• Staking Process of permanently joining parts together when one part protrudes through a hole in the other; a shaped punch is driven into the end of the protruding piece where a deformation is formed causing a radial expansion, mechanically locking the two pieces together
![Page 14: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/14.jpg)
• Coining Process where metal while it is confined in a closed set of dies; used to produce coins, medals, and other products where exact size and fine details are required, and thickness varies about a well-defined average
![Page 15: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/15.jpg)
Classification
• Hot working of metal
• Cold working of metal
![Page 16: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/16.jpg)
Cold working
Cold working is metal forming performed at room temperature.
Advantages: better accuracy, better surface finish, high
strength and hardness of the part, no
heating is required.
Disadvantages: higher forces and power, limitations to the
amount of forming, additional
annealing for some material is required, and some material are
not capable of cold working.
![Page 17: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/17.jpg)
Warm working
Warm working is metal forming at temperatures above the room
temperature but bellow the recrystallization one.
Advantages: lower forces and power, more complex part
shapes, no annealing is required.
Disadvantages: some investment in furnaces is needed.
![Page 18: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/18.jpg)
Hot working
Hot working involves deformation of preheated material at
temperatures above the re crystallization temperature.
Advantages: big amount of forming is possible, lower forces and
power are required, forming of materials with low ductility, no work
hardening and therefore, no additional annealing is required.
Disadvantages: lower accuracy and surface finish, higher
production cost, and shorter tool life.
![Page 19: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/19.jpg)
Forging
![Page 20: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/20.jpg)
Forging operations
Forging is a process in which the workpiece is shaped by compressive forces
applied through various dies and tools. It is one of the oldest metalworking
operations. Most forgings require a set of dies and a press or a forging hammer.
A Forged metal can result in the following: -
Decrease in height, increase in section - open die forging
Increase length, decrease cross-section, called drawing out.
Decrease length, increase in cross-section on a portion of the length -
upsetting
Change length, change cross-section, by squeezing in closed impression dies
- closed die forging. This results in favorable grain flow for strong parts
![Page 21: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/21.jpg)
Stages in Open-Die Forging
(a) forge hot billet to max diameter
(b) “fuller: tool to mark step-locations
(c) forge right side
(d) reverse part, forge left side
(e) finish (dimension control)
[source:www.scotforge.com]
![Page 22: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/22.jpg)
1. Blank (bar) 2. Edging 3.Blocking 4. Finishing 5. Trimming
Flash
(a)
(b)
(c)
1. Blank (bar) 2. Edging 3.Blocking 4. Finishing 5. Trimming1. Blank (bar) 2. Edging 3.Blocking 4. Finishing 5. Trimming
Flash
(a)
(b)
(c)Flash
(a)
(b)
(c)
Stages in Impression-die (Closed-Die) Forging
[source:Kalpakjian & Schmid]
![Page 23: UNIT III Bulk Deformation Process. Bulk Deformation Processes Characterized by significant deformations and massive shape changes "Bulk" refers to workparts.](https://reader034.fdocuments.us/reader034/viewer/2022050812/5a4d1b0c7f8b9ab05998bc64/html5/thumbnails/23.jpg)