Uniform Catalogue - ALSOprint Ltd · WW01 – MALE UNIFORM SHIRT SPEC 65% Polyester, 35% Cotton...
Transcript of Uniform Catalogue - ALSOprint Ltd · WW01 – MALE UNIFORM SHIRT SPEC 65% Polyester, 35% Cotton...
Andrew Wheatley [email protected]
07545 974305www.alsoprint.com
Uniform Catalogue
Vests Jackets Boots Clothing Accessories
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
TVBOS
SPEC
One pair of epauletsAdjustable shoulders for comfort fit3 Klickfast compatible docks.2 D-rings for key or carClear ID pocketVelcro front and back for insignia3 utility and 1 torch pockets
Handcuff pouch2 zipped document pocketsTwo way strong main zipNylon dog-hook for keys or dog leadEncapsulated reflective tapeSize 32” - 60” chest
VESTS
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
TEVPARK –PARKING CIVIL ENFORCEMENT VEST
SPEC
Airwave docks on both shouldersEpaulettesHandheld PCNs computer pouchPrinter pocket with no need to remove the printerLarge zipped panel pocketsVelcro patches front and back for operational badges or insigniaComfort fit adjustable shoulders
1000D nylon and polyesterBreathable military meshSizing Information:Small: 28 – 38 inchesMedium: 36 - 46 inchesLarge: 46 – 50 inchesXL-XXL: 50 – 56 inches
ALSO AVAILABLE IN HI VIS &
BLACK
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
MODHV2 - PROTEC HIGH VIS MODULAR MOLLE VEST
SPEC
Velcro patches for applying badges (sold separately)EN471 compliant reflective tapeSuperior military quality meshAntibacterial and fire resistant nylonLarge hidden pockets behind main front panels
Adjustable shoulders and sidesStrong military quality YKK zipsOne inch webbing MOLLE systemKlickfast compatible airwave docks for radio or mobile phone holders
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
PR6BWV - PINNACLE RESPONSE PR6 BODY CAMERA
SPEC
USB 3.0 – enables data transfer up to 25 times faster than USB 2.0. Fully decrypting 32 GB of 1080p footage and transferring to a standalone laptop takes less than 15 minutes with USB 3.0. (5 minutes of footage takes 7 seconds to upload)Secure USB – AES256 encryption fully complies with the Data Protection Act (1998) and protects you and your organisation from unauthorised users.D.E.M.S. – end to end footage management with full audit trail, the Pinnacle Response D.E.M.S soft-ware package provides a secure camera-to-court solution that is fully integrated with the PR6 body worn video camera.Fast Charging Dock – the Pinnacle Response fast charging dock fully charges the PR6 body worn video camera 3 times faster than a standard wall charger.1080p FULL HD – the PR6 produces crystal clear audio and video quality as standard, making it the most formidable cameras available.Pre-record Function – the PR6 has a pre-record feature that when enabled, automatically saves pre-vious footage when the shutter is activated.Still Frame Technology – the PR6 eradicates motion blur from still frame video footage; perfect for facial recognition and vehicle registration mark identification.IP66 Rating – the PR6 boasts one of the best water and dust resistant ratings in the world, making it dependable even in the harshest environments.Tamper Proof Design – non-removal battery and internal memory ensures that the PR6 and footage are safe and secure.
BODY CAMERAS
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WP3 – BLACK WATERPROOF SECURITY JACKET
SPEC
WaterproofEpaulettesStorm flapTwo way zipRibbed storm cuffs
WP2 – BLACK QUILTED WATERPROOF WORK JACKET (PLAIN)
SPEC
Outer layer: 100% 210T Polyester with PVC coatingFill: 100% 140g/m² polyester fibre waddingLining: 100% 190T polyesterWaterproof 2000mmWindproofFront 2-way zip fasteningStud closing stormflapConcealed fold-away adjustable hoodFront patch pocket with stud closersZipped inside chest pocketAdjustable draw cord waistMesh eyelets under armsFully taped seamsInner ribbed cuffClassic style 3/4 length work jacketLarge diamond quilted polyester wadding heat retaining liningGenerous fitUnisex product
JACKETS
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WP2 - BLACK QUILTED WATERPROOF WORK JACKET (PRINTED)
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
VIPER PRO 3.0 UNIFORM SHOES
SPEC
Durable leather upper with hardwearing breathable mesh panelsPadded collar and tongue for comfortScanner safe non-metallic composite hardwareFast wicking lining for moisture management & comfortM-P.A.C.T Response insole for maximum com-fort & shock absorption
E06600 – BATES SRT LIGHTWEIGHT TACTICAL UNIFORM SHOES
SPEC
Easy to clean moulded DuraFLEX upperLightweight and breathable mesh panels and tongueMelded heel counter for enhanced fitEVA cushion midsole with an internal nylon shankSlip resistant rubber outsole with reinforced toe stitch for increased durabilityPadded mesh collar for breathability and comfortRemovable cushioned insert with added arch support
SHOES
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
E02261 – BATES ULTRA-LITES TACTICAL 8” BOOT WITH SIDE ZIP
SPEC
Bates number 1 selling black bootLightweightSide zipperFull grain leather upper1680 denier nylon breathable mesh liningYKK nylon side zipperCushioned removable insertSlip resistant rubber outsoleAthletic cement construction
KU2 – KOMBAT UK PATROL BOOT
SPEC
Half leather designPadded cow suede collarAnti-slip PU soleSteel shank nylon lacesBronze eyeletsRemovable inner sole
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
E02667 – BATES GTX 8” GORE-TEX BOOTS
SPEC
Full-Grain waterproof leather and ballistic nylon upper which offers first time comfort ad high breathabilityDurably waterproof and breathable GORE-TEX® lining which keeps feet dry and Wickes away sweatCushioned removable insertSlip resistant rubber outsoleAthletic cement construction for the feel and comfort of a running shoe but support of a work boot
LOWA Z-8N GORE-TEX PATROL BOOTS
SPEC
Construction: slip lasted - injected soleUpper: buffalo leather, 2.0mm - 2.2mm + COR-DURA®Lacing: closed hooksLining: GORE-TEX® Performance Comfort FootwearSole: LOWA Cross Duty SoleUpper height inside/outside: 190/200Usage: moderate terrain (light-weight military boot)Weight: 1470g/pair
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
LOWA BLACK PATROL BOOTS
SPEC
Construction: board lasted upper - cemented soleUpper: full grain leather, 2.4 - 2.6 mmLacing: open hooksLining: CambrelleSole: Vibram® “Tsavo”Upper height inside/outside: 170/215Usage: rough terrainWeight: 1688 g/pair
LOWA ZEPHYR BLACK TACTICAL BOOTS
SPEC
Construction: slip lasted - injected soleUpper: suede leather, 1.4 - 1.6 mm + Cordura®Lacing: closed hooksLining: GORE-TEX® Extended Comfort FootwearSole: LOWA “Cross”Upper height inside/outside: 110/145Usage: moderate terrain (light-weight military boot)Weight: 1120 g/pair
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WW01 – MALE UNIFORM SHIRT
SPEC
65% Polyester, 35% CottonEasy care pilot uniform shirt Long Sleeved Sizes: 14” - 19.5” EpaulettesLong sleeve
WW02- MALE UNIFORM SHIRT
SPEC
Long sleeve
WW05 - FEMALE UNIFORM SHIRT
SPEC
Long sleeve
WW07 - FEMALE UNIFORM SHIRT
SPEC
Short sleeve
CLOTHING
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WW09 – CLIP ON TIE
SPEC
Length: 150cmBlade Width: 7.5cmSimple Clip on TieColour – Navy, Black
WW12 – UNIFORM FLEECE JUMPER
SPEC
L100% Polyester 280gsmWarm Fleece JacketMid-weightPilling-resistant Fully compatible with our Men’s Wet Weather Coat to create a 3 in 1 clothing solutionColour – Navy, BlackSizes: Small - 3XL
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WW14 – WICKING POLO SHIRT
SPEC
100% PolyesterWicking materialStain resistantSizes: Small to 4X-LargeEpaulettesShort sleeve
WW16 – NATO SWEATER
SPEC
50% Wool, 50% Acrylic Durable and comfortable NATO style sweater Colour – Navy, BlackSizes: Small - 2XL
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
WW19 – MEN’S CARGO TROUSERS
SPEC
65% Polyester, 35% CottonCombat trouser with expandable cargo pock-etsProfessional lookStain-resistant and durableColour – Navy, BlackSizes: 28 Regular – 52R
WW20 – LADIES CARGO TROUSERS
NOCT-PRO – NOCTURNA PRO NIGHT VISION
SPEC
Identification up to 100mBacklight and illumination adjustmentFixed FocusLight weightSimple to useON / off switchIncludes a belt pouchIdeal for Security, Search & Rescue and Close Protection
ACCESSORIES
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
E13 – PROTEC DOUBLE PEN HOLDER WITH METAL CLIP
SPEC
Made from stainless steelUniversal design, will hold any penHolds two pens or pencils
E14 - PROTEC TRIPLE PEN HOLDER WITH METAL CLIP
SPEC
Made from stainless steelUniversal design, will hold any penHolds three pens or pencils
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
INKA PEN – WRITE ANYWHERE PEN
SPEC
Easy access quick-use penConverts to full size penIncludes PDA stylusWaterproof penWrites upside downWrites in extreme temperatures at any altitudeStainless Steel and carbon fibre components
LPT1 – PROTEC LEATHER POLICE NOTEBOOK POUCH
SPEC
Made from 100% real leatherSide pocket for pen storageBelt loop suitable for all belts up to 50mm wideSize: 20x13x5cm
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
FP6 – PETER JONES LEATHER FIXED PENALTY WALLET
SPEC
Made from real leatherMeasures 349 x 114mm openedSecure press stud closure
FP5 – PROTEC NYLON FIXED PENALTY HOLDER TRAFFIC COMPANION
SPEC
Long fixed penalty ticketsHORT/1Stop and account padsPocket notebookSize closed 36 x 14 x 4 cm approx.
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
PWC5 – MAGNETIC WARRANT CARD ID CARD HOLDER
SPEC
Suitable for cards up to 90 x 60MMQuick and easy to utiliseMade from quality PVCLandscape design
LWC3 – PROTEC ID WARRANT CARD HOLDER
SPEC
Bi-fold design100% real leather2 clear PVC windows4 additional card slots
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
Optimum Front and Back Protection
The traditional coverage concealable vest pro-vides front and back protection. These protec-tive capabilities, combined with low weight, a
have made this MCP Armour vest preferable for concealable protection.
Protection Ballistic body armor Model 11 Optimum Protec-tion could be produced according all interna-tional standards as NIJ 0101.04; NIJ 0101.06; NIJ 0115.00; Technische Richtlinie; HOSDB; GOST 50 744-95; STANAG 2920; MIL 662. The level of protection of the bulletproof vest from above mentioned standards is chosen by the customer.
Standard Features
• Inner spacer (mesh) fabric providing ventilation• -
• Easy-care, dry-cleanable polycotton, polyamide or polyester outershell
• Removable ballistic panels • Zipper opening of the outer shell for easy removal/
insert of the ballistic panels
Options
• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet ballis-tic system
• Anti-stab protection system (alone or add-on)• Custom sizes• Custom colors
* Product images are for illustration purpose only.
MODEL 11 - OPTIMUM PROTECTION
MODEL 11 - OPTIMUM PROTECTION
SPEC
Optimum Front and Back ProtectionThe traditional coverage concealable vest pro-vides front and back protection. These protectivecapabilities, combined with low weight, a high degree of comfort, flexibility and mobility,have made this MCP Armour vest preferable forconcealable protection.
ProtectionBallistic body armour Model 11 Optimum Protection could be produced according all international standards as NIJ 0101.04; NIJ 0101.06; NIJ 0115.00; Technische Richtlinie; HOSDB; GOST 50 744-95; STANAG 2920; MIL 662.The level of protection of the bulletproof vestfrom above mentioned standards is chosen by the customer.
Standard Features• Inner spacer (mesh) fabric providing ventilation• Adjustable elastic straps provide a firm and
comfortable fit• Easy-care, dry-cleanable polycotton, polyamide
or polyester outershell• Removable ballistic panels• Zipper opening of the outer shell for easy
removal/ insert of the ballistic panels
Options• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet
ballistic system• Anti-stab protection system (alone or add-on)• Custom sizes• Custom colours
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
MODEL 12 - ENHANCED PROTECTION
Enhanced Concealable Protection
This enhanced coverage concealable vest provides front, back and sides protection. These protective capabilities, combined with low weight, a high degree of comfort and mobility, have made this MCP Armour vest prefect for concealable protec -tion.
Protection Ballistic body armor Model 12 Enhanced Protec-tion could be produced according all international
;00.5110 JIN ;60.1010 JIN ;40.1010 JIN sa sdradnats ;59-447 05 TSOG ;BDSOH ;einilthciR ehcsinhceT
STANAG 2920; MIL 662. The level of protection of the bulletproof vest from above mentioned standards is chosen by the customer.
Standard Features
• Inner spacer (mesh) fabric providing ventilation• • Elastic adjustment straps provide a �rm and
• Easy-care, dry-cleanable polyamide or polyester outershell
• Sides overlapping of the ballistic panels• Removable ballistic panels • Zipper opening of the outer shell for easy remov-
al/insert of the ballistic panels
Options
• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet ballistic system
• Anti-stab protection system (alone or add-on)• Custom sizes • Custom colors
* Product images are for illustration purpose only.
MODEL 12 - ENHANCED PROTECTION
SPEC
Enhanced Concealable ProtectionThis enhanced coverage concealable vest provides front, back and sides protection. These protective capabilities, combined with low weight, a high degree of comfort and mobility, have made this MCP Armour vest prefect for concealable protection.
ProtectionBallistic body armour Model 12 Enhanced Protection could be produced according all international standards as NIJ 0101.04; NIJ 0101.06; NIJ 0115.00; Technische Richtlinie; HOSDB; GOST 50 744-95; STANAG 2920; MIL 662.The level of protection of the bulletproof vestfrom above mentioned standards is chosen by the customer.
Standard Features• Inner spacer (mesh) fabric providing ventilation• Two fixed adjustment straps on the shoulders• Elastic adjustment straps provide a firm and
comfortable fit on the sides• Easy-care, dry-cleanable polyamide or
polyester outershell• Sides overlapping of the ballistic panels• Removable ballistic panels• Zipper opening of the outer shell for easy removal/ insert of the ballistic panels
Options• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet
ballistic system• Anti-stab protection system (alone or add-on)• Custom sizes• Custom colours
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
MODEL 23 - SECURITY POLICE DESIGN
Flexible Overlapping Protection
The Security Police MCP Armour vest provides front, back and sides protection. The side overlap-ping ensures full torso coverage. Security police and law enforcement units application.
Protection Ballistic body armor Model 23 Security Police De-sign could be produced according all international
;00.5110 JIN ;60.1010 JIN ;40.1010 JIN sa sdradnatsTechnische Richtlinie; HOSDB; GOST 50 744-95; STANAG 2920; MIL 662. The level of protection of the bulletproof vest from above mentioned standards is chosen by the cus-tomer.
Standard Features
• Side adjustment• Full torso coverage • Easy-care, dry-cleanable outershell • Removable ballistic panels• Waterproof ballistic panel cover• Integrated pockets for accessories• Front MOLLE webbing• Inner cummerbund to adjust the vest to the body
Options
• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet ballistic system
• Anti-stab protection system (alone or add-on)• Shoulders opening customization• Fixed or removable pouches• Pockets for hard armor inserts• Custom sizes and colors
* Product images are for illustration purpose only.
MODEL 23 - SECURITY POLICE DESIGN
SPEC
Flexible Overlapping ProtectionThe Security Police MCP Armour vest providesfront, back and sides protection. The side overlapping ensures full torso coverage. Security police and law enforcement units application.
ProtectionBallistic body armour Model 23 Security Police Design could be produced according all interna-tional standards as NIJ 0101.04; NIJ 0101.06; NIJ 0115.00; Technische Richtlinie; HOSDB; GOST 50 744-95; STANAG 2920; MIL 662.The level of protection of the bulletproof vest fromabove mentioned standards is chosen by the customer.
Standard Features• Side adjustment• Full torso coverage• Easy-care, dry-cleanable outershell• Removable ballistic panels• Waterproof ballistic panel cover• Integrated pockets for accessories• Front MOLLE webbing• Inner cummerbund to adjust the vest to the body
Options• IIIA+ 7,62x25 TT FMJ full steel jacketed bullet
ballistic system • Anti-stab protection system (alone or add-on)
• Shoulders opening customization• Fixed or removable pouches• Pockets for hard armour inserts• Custom sizes and colours
Andrew Wheatley | [email protected] | 07545 974305 | www.alsoprint.com
Andrew Wheatley [email protected]
07545 974305www.alsoprint.com