Uniclass EPIC CI/ SfB Centurion Rangekazeroonibuildingproducts.com/downloads/centurionrange.pdf ·...
Transcript of Uniclass EPIC CI/ SfB Centurion Rangekazeroonibuildingproducts.com/downloads/centurionrange.pdf ·...
THE LAIDLAW SERVICE
Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves.
In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware.
For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.
Specification AdviceLaidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.
Product DevelopmentAll products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.
Project ManagementHaving provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules.
CPD seminarsLaidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.
Packaging and DeliveryLaidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.
1 www.laidlaw.net
Centurion Range Availability
The Centurion Range is a selection of products developed by Laidlaw to meet the growing need for performance at a competitive price. The range is available from our trading branches across the UK.
For larger project requirements, a door bagging service is available on this range subject to a surcharge.
Ordering Products
When ordering products from the catalogue remember to specify the finish code after the product code - e.g LA02.5SS
Dimensions
All dimensions shown throughout this brochure are in mm.
CENTURION RANGE
Materials & Finishes
The range is available in Satin and Polished Stainless Steel, Satin and Polished Aluminium where stated.
SSSatin Stainless Steel
PSPolished Stainless Steel
SASatin Aluminium
The products listed within this publication are subject to a 2 year guarantee against defects proved to be the result of faulty manufacture or defective materials.Extended guarantees can be obtained for specific projects on application via your Laidlaw Technical Consultant and subject to an agreed maintenance programme.
2 www.laidlaw.net
PAPolished Aluminium
• Roundbar‘returntodoor’lever pre-fixed to a 10mm sprung rose • Suppliedwith‘boltthrough’and face fixings• Metalinnerrose• 8mmspindlesupplied• Conformstothedimensional requirements of BS 8300 for DDA applications• SS&PSfinishesareGrade316• 2yearguarantee
Lever Handle - Rose Mounted
• Roundbar‘returntodoor’lever pre-fixed to a 5mm unsprung rose • Suppliedwith‘boltthrough’and face fixings• Metalinnerrose• 8mmspindlesupplied• Conformstothedimensional requirements of BS 8300 for DDA applications• SS&PSfinishesareGrade316• 2yearguarantee
Lever Handle - Rose Mounted
Item no. Ø L Unit
LA02
LA10
19 140
• •pair
SS/PS
22 140
SA
Finishes
pair
Item no. Ø L Unit
LA02.5 19 140
• •pair
LA10.5 22 140
SS/PS SA
pair
Finishes
• •
• •
CENTURION RANGE - LEVER FURNITURE
3 www.laidlaw.net
Ø10
L
45
Ø5
L
45
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
• Aseriesofescutcheonswith concealed fixings for use with rose mounted levers or pull handles• Availablein10mmor5mmdepth• Suppliedwithfacefixings• SS&PSfinishesareGrade316• 2yearguarantee
EscutcheonsItem no. Depth Unit
LA17 10
••••••
•
•
•
•
•
•
••
single
LA17.5 5
SS/PS SA
LA17OV 10
LA17.5OV 5
LA17LK 10
LA17.5LK 5
LA17BL 10
LA17.5BL 5
Finishes
• •single
single
single
single
single
single
single
LA17 LA17OV
LA17LKLA17BL
Function
Euro profile
Euro profile
Oval profile
Oval profile
Lever key
Lever key
Blank
Blank
• Arosemountedindicator& turn for use with bathroom locks• Availablein10mmor5mmrose depth• Alsoavailablewithanextended turn for the less able• Eachturnsuppliedwith appropriate indicator• Suppliedwithfacefixings• SS&PSfinishesareGrade316• 2yearguarantee
Bathroom Indicator & Turns
Item no. Depth Unit
LA18.5 5 ••••
set
LA18 10
SS/PS SA
LA18.5D 5
LA18D 10
Finishes
••••
set
set
set
Function
Standard turn
Standard turn
Extended turn
Extended turn
LA18.5 LA18.5D
LA18 LA18D
CENTURION RANGE - LEVER FURNITURE
4 www.laidlaw.net
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Item no. Unit
LA130 pair
SS
•Description
Straight round bar lever
Item no. Unit
LA131 pair
SS
•Description
"Mitred" straight lever
Item no. Unit
LA132 pair
SS
•Description
"Arched" straight lever
Item no. Unit
LA135 pair
SS
•Description
"S" straight lever
Item no. Unit
LA133 pair
SS
•Description
"T" straight lever
Item no. Unit
LA134 pair
SS
•Description
"Mitred" return to door lever
A special edition series of stylish stainless steel lever handles on 6mm sprung rose.
• Leversarepre-fixedtotherose inner with push on rose covers to conceal fixings• AvailableinSatin(SS) • Polished(PS)finishavailableto order• Suppliedwithboltthroughback to back fixings and alternative face fixings • AllleversareGrade316stainless steel• 2yearguarantee
Lever Handles - Rose Mounted
6
6
6
6
6
6
140
140
140
135
135
135
6060
6060
6060
• Roundbar'returntodoor'lever handle pre-fixed to a 10mm sprung rose • Suppliedwith‘boltthrough’and face fixings• Metalinnerrosec/wrubber retaining ring• 8mmspindlesupplied• AvailableinPAfinishonly• 2yearguarantee
Lever Handle - Rose MountedItem no. Ø L Unit
54 719.6 19 140
•pair
54 722.6 22 140
PA
pair
Finish
•
CENTURION RANGE - LEVER FURNITURE
Ø10
L
45
•54 725.6 25 140 pair
• Roundbar'returntodoor'lever handle pre-fixed to a 10mm backplate • Suppliedwith‘boltthrough’and face fixings• Metalinnerplate• 8mmspindlesupplied• AvailableinPAfinishonly• 2yearguarantee
Lever Handle - Backplate Mounted
Ø10
45Item no. Lever Ø Unit
54 719.0 19
•
•
•
•
•
•
54 719.1 19
PA
54 719.2 19
54 719.3 19
54 719.3/47.5 19
54 719.4/5 19
54 719.7 19
Finish
•
pair
pair
pair
pair
pair
pair
pair
Plate Function
Blank
Lever key (57ccs)
Oval cyl. (48.5ccs)
Euro cyl. (57ccs)
Euro cyl. (47.5ccs)
Bath. set (57ccs)
Oval cyl. (56ccs)
Item no. Lever Ø Unit
54 722.0 22
•
•
•
•
•
•
pair
pair
pair
pair
pair
pair
pair
54 722.1 22
PA
54 722.2 22
54 722.3 22
54 722.3/47.5 22
54 722.4/5 22
54 722.7 22
Finish
•Plate Function
Blank
Lever key (57ccs)
Oval cyl. (48.5ccs)
Euro cyl. (57ccs)
Euro cyl. (47.5ccs)
Bath. set (57ccs)
Oval cyl. (56ccs)
Item no. Lever Ø Unit
54 725.0 25
••
pair
54 725.1 25
PA
54 725.2 25
Finish
•pair
pair
Plate Function
Blank
Lever key (57ccs)
Oval cyl. (48.5ccs)
5 www.laidlaw.net
Lever keyCentres 57mm
Oval cylinderCentres 48.5mmCentres 56mm
Euro cylinderCentres 47.5mmCentres 57mm
Bathroom setCentres 57mm
150
cent
res
see
belo
w
40
50
40
Ø10
45
40
140
140
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Spindles & Fixings All lever and rose variants are supplied as standard with a spindle suitable for doors 38mm to 54mm thick. Levers can be supplied as half sets to order in addition to the following spindle options.
Item no. Description
LA151 Half spindle to operate
LA152 Split spindle for locks with split followerLA151
LA152
LA150 Bolt through fixing pack for lever sets
CENTURION RANGE - LEVER FURNITURE
• Aseriesofescutcheonswith concealed fixings for use with rose mounted levers or pull handles• Suppliedwithfacefixings• AvailableinPAfinishonly• 2yearguarantee
EscutcheonsItem no. Depth Unit
51 700.0 10
••
•
single
51 700.1 10
PA
51 700.2 10
51 700.3 10
Finish
•single
single
single
51 700.0 51 700.1 51 700.2 51 700.3
Function
Blank
Lever key
Oval cylinder
Euro cylinder
• Arosemountedindicator& turn for use with bathroom locks• Extendedturnforthelessable• Eachturnsuppliedwith appropriate indicator• Suppliedwithfacefixings• AvailableinPAfinishonly• 2yearguarantee
Bathroom Indicator & Turns
Item no. Depth Unit
51 700.4 10 sets
51 700.5 10
PA
51 700.15 10
Finish
•••
sets
sets
Function
Indicator
Standard turn
Extended turn
51 700.5 51 700.1551 700.4
6 www.laidlaw.net
54 719.1 PA lever handles and LA502 lever lock
Item no. Ø Centres Unit
LA07 19 225
pair
pair
pair
pair
pair
pair
LA08 19 300
SS/PS SA
LA78 19 450
LA15 22 225
LA16 22 300
LA81 22 450
FinishesBack to Back
••••••
••••••
CENTURION RANGE - PULL HANDLES
A series of round bar pull handles for single bolt through fixing, or in pairs fixed back to back
• Suppliedcompletewithfixingsto suit timber doors• Availablein19mmand22mm diameters• Forpush/pullapplicationsselect an appropriate push plate for the other side of the door (see page 9 for push plate details)• SS&PSfinishesareGrade316• Pullhandlesof450mmcentres and above meet the requirements of BS 8300 for DDA applications • Spareboltthroughfixingpacks are available (see below)• Facefixingrosesalsoavailable (see below)• 2yearguarantee
Pull Handles Item no. Ø Centres Unit
LA05 19 225 single
LA06 19 300
SS/PS SA
single
LA77 19 450 single
LA13 22 225
single
LA14 22 300
single
LA80 22 450
single
FinishesBolt Through
45Ø
cent
res
••••••
••••••
pair
LA101 19 600
• •
LA103 22 600
pair• •
LA100 19 600
LA102 22 600
single• •single• •
Fixing pack to convert bolt through fixing pull handles to concealed fixing surface mounted pulls
• Availableas5mmor10mm roses with concealed fixings • Suppliedcompletewithfixings for timber doors• SS&PSfinishesareGrade316•Mustbeorderedtosuit19mmor 22mm pull handles• 2yearguarantee
Pull Handle Roses
Item no. Ø Depth Unit
LA116 19 10mm pair
LA117 22 10mm
SS/PS SA
pair
LA118 19 5mm pair
pair
FinishesConcealed Fix Roses
••••
••••LA119 22 5mm
LA126 19 150 single
LA128 22 150
• •
single• •
LA127 19 150
LA129 22 150
pair• •pair• •
5 or 10
Ø
52Ø
7 www.laidlaw.net
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Item no. Description
LA158.19 M6 bolt pack for 19mm pulls (SS & PS only)
LA158.22 M8 bolt pack for all 22mm, 25mm & 32mm diameter pulls & 19mm pulls in SA finish
Bolt Through Fixing Packs
8 www.laidlaw.net
CENTURION RANGE - PULL HANDLES
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Item no. Ø Centres Unit
53 719.22.1 19 225 single
53 719.30.1 19 300
PA
single
53 719.45.1 19 450 single
FinishBolt Through
45Ø
cent
res
•••
53 719.15.1 19 150 single•A series of round bar pull handles for single bolt through fixing, or in pairs fixed back to back
• SuppliedcompletewithM8 fixings to suit timber doors• Availablein19mm,22mmand 25mm diameters• Forpush/pullapplicationsselect an appropriate push plate for the other side of the door (see page 9 for push plate details)• AvailableinPAfinishonly• Pullhandlesof450mmcentres meet the requirements of BS 8300 for DDA applications • 2yearguarantee
Pull Handles
53 722.22.1 22 225 single
53 722.30.1
53 722.45.1
22
22
300
450
single
single
•••
53 722.15.1 22 150 single•
53 725.30.1
53 725.45.1
25
25
300
450
single
single
••
53 725.22.1 25 225 single•
Item no. Ø Centres Unit
53 719.22BB 19 225 pair
53 719.30BB 19 300
PA
pair
53 719.45BB 19 450 pair
FinishBack to Back
•••
53 719.15BB 19 150 pair•
53 722.22BB 22 225 pair
53 722.30BB
53 722.45BB
22
22
300
450
pair
pair
•••
53 722.15BB 22 150 pair•
53 725.30BB
53 725.45BB
25
25
300
450
pair
pair
••
53 725.22BB 25 225 pair•
A series of round bar pull handles complete with rose mounting for face fixing
• Suppliedcompletewithfixingsto suit timber doors• Availablein19mm,22mmand 25mm diameters• AvailableinPAfinishonly• Pullhandlesof450mmcentres and above meet the requirements of BS 8300 for DDA applications • Coveredroseconcealsfixings• 2yearguarantee
Pull Handles - Face Fixed
45Ø
cent
res
Item no. Ø Centres Unit
53 719.22.6 19 225 single
53 719.30.6 19 300
PA
single
53 719.45.6 19 450 single
FinishFace Fixed
•••
53 719.15.6 19 150 single•
53 722.22.6 22 225 single
53 722.30.6
53 722.45.6
22
22
300
450
single
single
•••
53 722.15.6 22 150 single•
53 725.30.6
53 725.45.6
25
25
300
450
single
single
••
53 725.22.6 25 225 single•
10
52Ø
Fixing PacksA series of fixing packs are available for all of the above Centurion pull handles (see page 9 for details)
CENTURION RANGE - PUSH PLATES & KICKING PLATES
• Pushplatesforusewithbolt through pull handles• Squarecornersdrilled& countersunk - supplied complete with screws• Platethickness1.5mm• SS&PSfinishesareGrade304• 2yearguarantee
Push PlatesItem no. Size (mm) Unit
LA23 330 x 75 single
LA23.500 500 x 75
SS/PS SA
single
LA23.650 650 x 75 single
Finishes
••••
Push Plates
••
Size (mm) Unit
To order single
SS/PS SA
Finishes
••
Kicking Plates
• Kickingplates-specifysize required• Squarecornersdrilled& countersunk - supplied complete with screws• Platethickness1.5mm• SS&PSfinishesareGrade304• 2yearguarantee
Kicking Plates
Item no. Size (mm) Unit
52 702.325 325 x 75 single
52 702.500 500 x 75
PA
single
52 702.650 650 x 75 single
Finishes
•
Push Plates
••
52 703 325 x 75 "PUSH" single•
9 www.laidlaw.net
Pull Handle Fixings
FPP3
FPP5
FPP6
As standard, bolt through handles are supplied with fixings FPP3 and back to back handles are supplied with fixing pack FPP5 to suit up to 55mmthickdoors.Alternativesizesand fixing types are also available.
FPP3 - Bolt through fixing for timber doors with CSK M8 bolts
FPP5 - Back to back fixing for timber doors 35 - 55mm.
FPP6 - Back to back fixing for glass doors with nylon bush and washers.
FPP7 - Bolt through fixing for glass doors with 'Pig nosed' bolt.
Please contact your Laidlaw Technical Consultant for full details of variations available.
Pull Handle Fixings
FPP7
NoteAll bolts are M8.Clearance hole for glass door fixings - 14mm Ø
glass doors10 - 14mm
glass doors10 - 14mm
For sliding doors, or where a minimum projection is required, a recessed flush pull can be used
• LA27is"screwfixed"• LA28is"pinfixed"• SS&PSfinishesareGrade304• 2yearguarantee
Flush PullsItem no. Dimensions Unit
LA27 100 x 50 x 12mm single
LA28 75mm Ø x 13mm
SS/PS SA
single
Finishes
• •• •
LA28
LA27
• Aseriesofcylinderpullsfor use with cylinder nightlatches and deadlocks• Thicknessofpull2mm• SS&PSfinishesareGrade304• 2yearguarantee
Cylinder Pulls
Item no. Function Unit
LA19 Euro profile single
LA24 Lever key
SS/PS SA/PA
single
LA25 Oval profile single
LA26
LA26.8
Blank
Rim cylinder
single
single
Finishes
••••••
LA19 LA24 LA25
LA26 LA26.8
••••
CENTURION RANGE - FINGER PULLS
Mounted in the hinge edge of the door and frame. Used for lightweight doors.
•Solidconstruction• Fullyhiddenwhenthedooris closed• Adjustablespringstrength• Suitableforuseonlightweightor medium weight internal doors up to 50kg• Suppliedc/wscrewsandfitting instructions• Thisproducthasbeenincluded in a successful 30 minute fire test to BS476 Part 22: 1987
Concealed Door CloserItem no. Description Unit
31 741 Concealed door closer single
PB NP
Finishes
• •
31 741
10 www.laidlaw.net
LA90Features & Functions Item no.
Powersize(seechartonpage12) 2 - 4
Grade of opening angle (see note #) 3
Adjustable closing speed •
Adjustable latch action •
Adjustable back check -
Hold open armset option
-
Template** or spring power adjustable template
Fixed power or adjustable adjustable
BS EN 1154 compliant & CE Marked •
** by altering the mounting position of the closer, the closing strength can be adjusted# Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle
Fire tested to EN 1634 - 2 hour
Fire tested to EN 1634 - 1 hour
•
LA91
2 - 4
4
•
•
•-
spring
adjustable
•
•
LA92
2 - 6
4
•
•
•-
spring
adjustable
•
•
fig. 1
fig. 66
max. projection 10mm44mm min.
80m
m m
in.
110m
m m
in.
Applications for LA90, LA91 & LA92
FinishesCenturion closers have metallic plated finishes with arms and brackets to match.
PS - Polished Stainless SteelSS - Satin Stainless SteelSA - Silver Sprayed
BS EN ClassificationsThe following closers have been designated with the Classification number as shown below.
3112-483
50mm (LA90/LA91)60mm (LA92)
245mm (LA90/LA91); 307mm (LA92)
72m
m (L
A90,
91/9
2)
LA90
3112-484LA91
3112-684LA92
A series of CE marked surface mounted overhead door closers with an all over cover concealing all fixings and adjustment screws.
The range provides the following features (see table below):
• CEmarked,suitableforfiredoor applications• Fully certified to EN1154, EN1634, CE Marked and Certifire Approved CF388• Adjustableclosingforce• Adjustableclosingspeed• Latchaction• Adjustablebackcheck• ReversibleforLH&RH applications• Flatformarms• Suitable for fig.1, fig.61 & fig.66 mounting• AvailableinSS,PS&SAfinishes• Holdopenarmpacksavailable for some models (not suitable for fire doors)• 2 year guarantee
Overhead Door Closers LA90; LA91 & LA92
A series of closers designed to provide a mid-range product with the choice of the most popular options, in a concise, cost-effective package. The main features of this series include full certification to EN1154, EN1634, CE Marked and Certifire Approved CF388
See product selector table below for full range of features
CENTURION RANGE - DOOR CLOSERS
LA73
2 - 6
4
•
•
•
•
spring
adjustable
•
-
•-
Adjustable delayed action
•-
•-
•-
11 www.laidlaw.net
LA83
2 - 4
4
•
•
•
•
spring
adjustable
•
-
-
•
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
CENTURION RANGE - DOOR CLOSERS
A series of CE marked surface mounted overhead slide track door closers with an all over cover concealing all fixings and adjustment screws.
These closers have the following features:
• CEmarked,suitableforfiredoor applications• Fully certified to EN1154, EN1634, CE Marked and Certifire Approved CF388• Fixedoradjustableclosingforce versions• Adjustableclosingspeedand latch action• Adjustablebackcheck• ReversibleforLH&RH applications• Slidetrackandarminmatching finish• AvailableinSS,PS&SAfinishes• 2 year guarantee
Overhead Door Closers
BS
EN 1
154
Pow
er s
ize
1 20kg
40kg
60kg
80kg
100kg
120kg
2
3
4
5
6
Door width (mm)Door weight (kg)
750m
m
850m
m
950m
m
1100
mm
1250
mm
1400
mm
Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.
LA90.30Features & Functions Item no.
Powersize(seechartopposite) 3
Grade of opening angle (see note #) 4
Adjustable closing speed •
Adjustable latch action •
Adjustable back check -
Bodysize(WxHxD) 207 x 60 x 38.5
Fixed power or adjustable fixed
BS EN 1154 compliant & CE Marked •
Fire tested to EN 1634 - 2 hour
LA92.30
2 - 4
4
•
•
•
297 x 60 x 48
adjustable
•
• •
BS EN ClassificationsThe following closers have been designated with the Classification number as shown below.
311384LA90.30
3112-484LA92.30
FinishesCenturion closers have metallic plated finishes with arms and brackets to match.
PS - Polished Stainless SteelSS - Satin Stainless SteelSA - Silver Sprayed
245mm (LA90.30)307mm (LA92.30)
72
545
50 (LA90.30)60 (LA92.30)
20
77 (L
A90.
30)
87 (L
A92.
30)
40
12 www.laidlaw.net
# Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Selection adviceFixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can help to avoid installing an under-powered or over-powered unit and help service providers meet the requirements for DDA applications.
BS
EN 1
154
Pow
er s
ize
1 20kg
40kg
60kg
80kg
100kg
120kg
2
3
4
5
6
Door width (mm)Door weight (kg)
750m
m
850m
m
950m
m
1100
mm
1250
mm
1400
mm
253
66
54
BS EN ClassificationsThe following closers have been designated with the Classification number as shown below.
3112-483LA83
CENTURION RANGE - DOOR CLOSERS
Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.
A series of CE marked surface mounted overhead door closers with an all over cover concealing all fixings and adjustment screws.
The range provides the following features
• Fully certified to EN1154, EN1634, and CE Marked• Adjustableclosingforce• Adjustableclosingspeed• Latchaction• Adjustablebackcheck• Adjustabledelayedaction• ReversibleforLH&RH applications• Flatformarms• Suitable for fig.1, fig.61 & fig.66 mounting• AvailableinSS,PS&SAfinishes• 2 year guarantee
See product selector table on page 11 for full range of features
Overhead Door Closers
4112-684LA73
299
66
46
FinishesCenturion closers have metallic plated finishes with arms and brackets to match.
PS - Polished Stainless SteelSS - Satin Stainless SteelSA - Silver Sprayed
LA83
LA73
13 www.laidlaw.net
CENTURION RANGE - DOOR CLOSERS
14 www.laidlaw.net
A series of CE marked surface mounted overhead closers with trimplate.
These closers have the following features:
• CEmarked,suitableforfiredoor applications• Fully certified to EN1154, EN1634, CE Marked and Certifire Approved CF277• Adjustableclosingspeedand latch action• Optionaldelayedaction• Polishedanodisedaluminium body and matching arms only• 2 year guarantee
Overhead Door Closers
31 600 31 601 31 602 31 755Features & Functions Item no.
Powersize(seechartopposite) 2 - 4 2 - 5 2 - 6 3
Grade of opening angle (see note #)
Projecting arm (P) or Track arm (T)
3
P
3
P
3
P
3
P
Adjustable closing speed • • • •
Adjustable latch action • • • •
Adjustable back check
Adjustable delayed action
-
-
-
-
-
-
-
-
Power adjustment by position or spring position spring spring n/a
Fixed power or adjustable adjustable adjustable adjustable fixed
BS EN 1154 compliant & CE Marked • • • •
Fire tested to EN 1634 on timber door
IFC Approved
Certifire Approved
Warrington Certification
2 hour
•
•-
2 hour
•
•-
2 hour
•
•-
2 hour
-
-
•
31 600
31 755
An economic but fully functional overhead door closer.
This closer has the following features:
• CEmarked,suitableforfiredoor applications• Fully certified to EN1154, EN1634, CE Marked and Warrington Certification 1121-CPD-AD0061• Fixedpowersize3suitablefor doors up to 60kg and 950mm wide (see chart on page 13)• Adjustableclosingspeedand latch action• Simpleinstallationand adjustment• Sprayedsilverfinishwithother colours available (please contact your Laidlaw Consultant for details)• 2 year guarantee
Overhead Door Closer
BS EN ClassificationsThe following closers have been designated with the Classification number as shown below.
3
3
3
1
1
1
1
1
1
2-4
2-5
2-6
8
8
8
3
3
3
31 600
31 601
31 602
BS EN ClassificationsThe following closers have been designated with the Classification number as shown below.
31138331 755
180
40
62
200 (31 600 & 31 601)
240 (31 602)
51 (3
1 60
0 &
31 6
01)
60 (3
1 60
2)
41 (31 600 & 31 601)
45 (31 602)
# Grade 4 will close a door from 180˚ opening angle. Grade 3 will close a door from 105˚ opening angle
CENTURION RANGE - FLOOR SPRING
15 www.laidlaw.net
Suitable for heavy duty applications on single or double action doors up to 100kg. Features include:
• CEmarkedsuitableforfiredoor applications• Fixedstrengthsize3• Adjustableclosingspeed• Largerangeofadjustment• Suppliedcompletewithtop centre, bottom strap and satin stainless steel cover plate• Singleactionanddoubleaction variants• 2yearguarantee
Floor Springs
Item no.single action
LA74 • • • -LA75 • • - •
double action
adjust. speed
CE marked
5010
582
278
298
Fixedpower-size3
Powersize
Fixedpower-size3
BS
EN 1
154
Pow
er s
ize
1 20kg
40kg
60kg
80kg
100kg
120kg
2
3
4
5
6
Door width (mm)Door weight (kg)
750m
m
850m
m
950m
m
1100
mm
1250
mm
1400
mm
Power sizes Centurionfloorspringsarefixedpowersize3.Seechart above for suitable door applications. For doors outside these parameters please contact your Laidlaw Technical Consultant or nearest Sales Office for guidance.
BS EN ClassificationsThe following floor springs have been designated with the Classification number as shown below.
4111-483LA74
4111-483LA75
16 www.laidlaw.net
CENTURION RANGE - LOCKCASES & CYLINDERS
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
An integrated series of modular euro profile cylinder mortice lockcases designed to meet the requirements of BS EN 12209
• Slimlinecasewith6function variants• Modulardesignallows interchangeability of lock models• Meetstherequirementsof BS EN12209 and with the dimensional characteristics of DIN18251 • 60mmbackset(Escapesashlock 55mm backset)• 72mmEuroprofilecentres• 78mmbathroomcentres• Boltthroughhardwarefixings• 20mmdoublethrowdeadbolt• Quickreversiblelatchbolt• Springingsuitableforunsprung lever furniture• Singlepieceforendingrade304 stainless steel with matching strike plate• Optionalradiusedorsquare forend styles• MeetsBS8300dimensional recommendations making it suitable for DDA applications• Nightlatchfunctionwithout hold-back facility• Rebatekitsavailable,see page 17• 2yearguarantee
Euro Profile Mortice Lockcases
FunctionItem no.
LA60R Sashlock
Deadlock
Latch
Bathroom lock
Nightlatch*
SS Unitsingle
SA
Finishes
•single•single•single•single•
LA61R
LA62R
LA63R
LA64R
Radiused forend
11 862R
FunctionItem no.
LA60 Sashlock
Deadlock
Latch
Bathroom lock
Nightlatch*
SS Unitsingle
SA
Finishes
•single•single•single•single•
LA61
LA62
LA63
LA64
Square forend
Escape sashlock single•LA65R
Escape sashlock single•LA65
LA62R
29
165
57
235
4621
,5
3235
4572
14
4572
3532 46
21,5
6378
165
235
14
23933
38
60
38
93
3
60
23
863
72
195
12
8
12
8
LA63R LA62
A series of euro profile and oval profile cylinders to suit both European and UK lock cases
• Europrofileandovalcylinders are available as standard differ • Choiceofcylinderlengthsto suit different door and hardware thicknesses• Satinnickelplatedfinish• Suppliedwith3keys• 2yearguarantee
Cylinders Cylinder typeItem no.
LA201E.60.NP Euro cylinder & turn
Euro cylinder & turn
Unit
single
singleLA201E.70.NP
Length
60mm
70mm
Euro cylinder & turn singleLA201E.80.NP 80mm
Euro double cylinder singleLA202E.60.NP 60mm
Euro double cylinder singleLA202E.70.NP 70mm
Euro double cylinder singleLA202E.80.NP 80mm
Oval single cylinder singleLA200O.40.NP 40mm
Oval single cylinder singleLA200O.45.NP 45mm
Oval cylinder & turn singleLA201O.60.NP 60mm
Oval cylinder & turn singleLA201O.70.NP 70mm
Oval cylinder & turn singleLA201O.80.NP 80mm
Oval double cylinder singleLA202O.60.NP 60mm
Oval double cylinder singleLA202O.70.NP 70mm
Oval double cylinder singleLA202O.80.NP 80mm
Rim cylinder singleLA203 n/a
Rim mortice cylinder singleLA204 n/a
LA200E.45.NP Euro single cylinder single45mm
LA200E.40.NP Euro single cylinder single40mm
-
-
-
-
-
-
-
-
-
-
-
-
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
* without hold-back function
Fire Door ApplicationsWhen used on fire doors, intumescent packs need to be specified IP L1 - For all lock cases except LA65 & LA65R
IP L2 - For LA65 & LA65R
For 30 min fire door applications specify 1 pack per lockcase.For 60 min fire door applications specify 2 packs per lockcase.
•AseriesofUKstylemortice cylinder lockcases in 64mm and 76mmcasesizes• Twopartforend• Brassdeadboltwithhardened steel 'anti-saw' rollers• Suitableforboltthroughlever assemblies• Forendsandstrikesaresatin zincplatedfinishorsatin stainless steel only• 2yearguarantee
N.B: Radius deadbolt is not available on Oval profile lockcases and therefore rebate kits are not available to suit
Lockcases - UK StyleItem no. A
LA36SZ 64
LA37SZ
Function
Latch
Latch 76
64
76
64
76
64
76
64
76
64
76
64
76
LA40SZ Euro sashlock
LA41SZ Euro sashlock
LA46SZ Oval sashlock
LA47SZ Oval sashlock
LA42SZ Euro deadlock
LA43SZ Euro deadlock
LA48SZ Oval deadlock
LA49SZ Oval deadlock
LA38SZ Euro nightlatch
LA39SZ Euro nightlatch
LA44SZ Bathroom lock
LA45SZ Bathroom lock
B
43
57
43
57
43
57
43
57
43
57
43
57
43
57
C
-
-
47
47
48.5
48.5
-
-
-
-
47
47
57
57
Dimensions
79LA50SS Bathroom deadbolt 57 -
CENTURION RANGE - LOCKCASES & REBATE SETS
A rebate set will convert the meeting stiles of a rebated pair of doors so that the standard mortice lock can be used.
• Availablein13mmand25mm rebate depths where stated• Steelstrikessatinnickelplated finish• Suitableforsquareforendlocks only• 2yearguarantee
Rebate Sets for Cylinder Locks13mm rebateLock reference:
LA60, LA62, LA63, LA64, LA65
LA60.13
LA61.13
25mm rebate
LA60.25
LA61.25
Rebate Sets
C 108
A25
57 108
108
B
A
B
17 www.laidlaw.net
LA42SZ LA44SZ LA40SZ
LA40.13 n/a
LA60.13
LA40.13LA42.13
LA61
LA36, LA37, LA38, LA39, LA40, LA41, LA44, LA45, LA302, LA303, LA502, LA503
LA42.13 n/aLA42, LA43LA312, LA313LA512, LA513
Please Note: LA40.13 and LA42.13 are only compatible with locks with radiused deadbolts
CENTURION RANGE - LOCKCASES
18 www.laidlaw.net
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
A series of UK style mortice 5 Lever lockcases in 64mm and 76mm casesizes
• Testedandapprovedto BS 3621 - 2004• Twinhardenedrollers• HardenedsteelAnti-Drillplates on the lock case• 1400keydiffers• Anti-Tamperlevers• Reversiblelatch• 20mmthrowdeadbolt• Suppliedwith2keys• Rebatekitsavailable(see page 17)• 2yearguarantee
Lockcases - 5 Lever LocksItem no. A
LA502SS 67
LA512SS
Function
5 Lever Sashlock
5 Lever Deadlock 67
79
79
LA503SS 5 Lever Sashlock
LA513SS 5 Lever Deadlock
B
44.5
44.5
57
57
C
57
-
57
-
Dimensions
LA512SS
LA502SS LA503SS
C
158
A
25.4
78 121
110
B
A
B
Item no. A
LA302SS 67
LA312SS
Function
3 Lever Sashlock
3 Lever Deadlock 67
79
79
LA303SS 3 Lever Sashlock
LA313SS 3 Lever Deadlock
B
44.5
44.5
57
57
C
57
-
57
-
Dimensions
LA312SS
LA302SS LA303SSA series of UK style mortice 3 Lever lockcases in 64mm and 76mm casesizes
• Residential3Leverlockcases• Minimum144keydiffers• Heavysprung• Suppliedwith2keys• Rebatekitsavailable(see page 17)• 2yearguarantee
Lockcases - 3 Lever Locks
25.4
A range of floor, skirting and wall mounted door stops
• Skirtingmounteddoorstopsin varying lengths• Floormounteddoorstop• Seechartoppositeforfinishes
Door StopsItem no. Description
LA82 Wall mounted (85mm) SS & PS
PA
PA
PA, PCP & SCP
32 701.1
32 701.2
32 703
Wall mounted (63mm)
Wall mounted (76mm)
Floor mounted
Finishes
25
200
Item no. Size Unit
LA85 200 x 25mm singleSS/PS SA
Finishes
• -
Flush Bolt
Door Stops
32 703
32 701.1 32 701.2 LA82
Item no. Description Unit
LA35 Mortice type c/w key singleBZP SA
Finishes
• -
Mortice Budget Lock
19 www.laidlaw.net
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
Flush Bolt
Mortice Budget Lock
90
24
54
• Leveractionflushbolt• 2yearguarantee
• Suppliedcompletewith"T"Key• 2yearguarantee
BZP - Bright Zinc Plated
LA58
13 701
13 700
A series of tubular, mortice or roller latches for timber doors
• 13 700Steelcaseassemblyzinc coated Easy fit using 22mm dia. drill bit 8mm follower
• 13 701 available with square or radius forend 8mm follower• LA58 - Nylon roller Steel case Electroplated brass or Nickel plated forends
Latches
Item no. Description 1017964
13 700
13 701
13 701R
LA58
Tubular latch - SNP finish
Mortice latch - SS finish
Mortice latch - Radius forend
Roller catch - EB or NP finish
-
•
•
•
•
•
not applicable
•
•
•
Case size (mm)
Rebatesize
To suit tubular latch 13 700
To suit mortice latch 13 701
To suit mortice latch 13 701R
13mm
25mm
LA700.13 LA701.13 LA701.13R
LA700.25 LA701.25 LA701.25R
Specific rebate sets are available to suit latches 13 700 and 13 701
CENTURION RANGE - LATCHES & ACCESSORIES
CENTURION RANGE - HINGES
20 www.laidlaw.net
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
•Aseriesofsquareandradiuscorneredhinges• BSEN1935Grade13• PolishedorSatinStainlessSteel• 2yearguarantee
Hinges - Ball Bearing
SizesItem no.
LA160 102 x 76mm
102 x 102mm
SS Unitsingle
PS
Finishes
•single•LA161
Square cornered hinge
••
SizesItem no.
LA162 102 x 76mm
102 x 102mm
SS Unitsingle
PS
Finishes
•single•LA163
Radius cornered hinge
••
LA162 LA160 LA161
•Aseriesofsquareandradiuscorneredhinges• BSEN1935Grade13• MildSteelwithzincplatedEZPorcolouredpowder coated finish • 2yearguarantee
Hinges - Ball Bearing
SizesItem no.
37 700.2 102 x 76mm
102 x 102mm
EZP Unitsingle
Finish
•single•37 701.2
Square cornered hinge
SizesItem no.
37 700.1
37 701.1
102 x 76mm
102 x 102mm
EZP Unitsingle
single
Finish
••
Radius cornered hinge
37 700.2 37 701.2
37 700.1 37 701.1
Fire Door ApplicationsWhen used on fire doors, intumescent packs need to be specified IP H1 - to suit 76 x 102mm hingesIP H2 - to suit 102 x 102mm hinges
Note: Each hinge pack contains intumescent material for a pair and a half of hinges.
For 30 min. fire door applications specify 1 intumescent pack per pair and a half of hinges.For 60 min. fire door applications specify 2 intumescent packs per pair and a half of hinges.
21 www.laidlaw.net
CENTURION RANGE - ACCESSORIES
- All dimensions are in mm- Specify the finish code after each product code - e.g LA10SS
A range of surface fixed hooks
Hooks
Item no. Description Unit
LA86 Buffered hat/coat hook single
LA84 Hat/coat hook
SS/PS SA
single
•LA21 Coat hook single
Finishes
•••
•
Hooks
LA21 LA84 LA86
•
Other complimentary items are also available. Please contact your local Laidlaw Technical Consultant or Sales Office for more information.
A series of symbols supplied with wood screws for surface fixing. See table for finishes available.
Signs & Symbols
Item no. Description Unit
60 700.1 Male symbol single
60 700.2 Female symbol
SS/PS PA
single
••••••
60 700.3
60 700.4
60 700.9
Disabled symbol
Baby change
Shower symbol
single
single
single
Finishes
••
Signs 150 x 100mm
••
Item no. Description Unit
60 700.5 Unisex symbol singleSS/PS PA
FinishesSigns 150 x 150mm
••
FIRE EXIT
FIRE EXITFIRE EXITFIRE EXIT
FIREEXIT
FIRE EXIT
FIRE EXITFIRE EXITFIRE EXIT
FIREEXIT
60 011.1 - 100mm x 630mm
60 013.1 - 100mm x 630mm
60 412.1 - 60 412.2 60 411.1 - 60 411.2
60 417.1 - 60 417.2 60 416.1 - 60 416.2
Automaticfire door
Keep clear
60 030
Fire doorKeep
locked
60 031
Securedoor open
whenpremises are
occupied
60 032
Fire check doorKeep clear
This door willautomatically close
when the alarm systemis operated
Test release deviceweekly
60 033
Thisdoor to be
kept locked shutwhen not
in use
60 034
Keepunlocked
duringworkinghours
60 035
Alarmwill soundif this dooris opened
60 036
Keeplockedshut
60 037
Closethisdoor
60 038
Automaticfire door
Keep clearClose at
night
60 039
Removesecurity
fasteningwhen premisesare occupied
60 040
Fire doorKeep shut
60 041
For further options on signage please refer to our Orbis Classic, Orbis Commercial or Orbis Premier brochures.
22 www.laidlaw.net
CENTURION RANGE - INDEX
Item No. Page No. Item No. Page No. Item No. Page No.
FPP3 9FPP5 9FPP6 9FPP7 9LA02 3LA02.5 3LA05 7LA06 7LA07 7LA08 7LA10 3LA10.5 3LA13 7LA14 7LA15 7LA16 7LA17 4LA17.5 4LA17BL 4LA17.5BL 4LA17LK 4LA17.5LK 4LA17OV 4LA17.5OV 4LA18 4LA18.5 4LA18D 4LA18.5D 4LA19 10LA21 20LA23 9LA23.500 9LA23.650 9LA24 10LA25 10LA26 10LA26.8 10LA27 10LA28 10LA35 19LA36 17LA37 17LA38 17LA39 17LA40 17LA41 17LA42 17LA42.13 17LA43 17LA44 17LA45 17LA46 17LA47 17LA49 17LA50 17LA58 19LA60 16LA60R 16LA60.13 17LA60.25 17LA61 16LA61R 16LA61.13 17
LA61.25 17LA62 16LA62R 16LA63 16LA63R 16LA64 16LA64R 16LA65 16LA65R 16LA73 13LA74 15LA75 15LA77 7LA78 7LA80 7LA81 7LA82 19LA83 13LA86 20LA85 19LA86 20LA90 11LA90.30 11LA91 11LA92 11LA92.30 11LA100 7LA101 7LA102 7LA103 7LA116 7LA117 7LA118 7LA119 7LA126 7LA127 7LA128 7LA129 7LA130 3LA131 3LA132 4LA133 4LA134 4LA135 4LA151 6LA152 6LA153 6LA158.19 7LA158.22 7LA160 20LA161 20LA162 20LA163 20LA200E.40 16LA200E.45 16LA201E.60 16LA201E.70 16LA201E.80 16LA202E.60 16LA202E.70 16LA202E.80 16LA200O.40 16LA200O.45 16
LA201O.60 16LA201O.70 16LA201O.80 16LA202O.60 16LA202O.70 16LA202O.80 16LA203 16LA204 16LA302 18LA303 18LA312 18LA313 18LA502 18LA503 18LA512 18LA513 18LA700.13 19LA700.25 19LA701.13 19LA701.13R 19LA701.25 19LA701.25R 19
13 700 1913 701 1913 701R 1931 600 1431 601 1431 741 1031 755 1432 701.1 1932 701.2 1932 703 1937 700.1 2037 700.2 2037 701.1 2037 701.2 2051 700.0 651 700.1 651 700.2 651 700.3 651 700.4 651 700.5 651 700.15 652 702.325 952 702.500 952 702.650 952 703 953 719.15.1 853 719.15.6 853 719.15BB 853 719.22.1 853 719.22.6 853 719.22BB 853 719.30.1 853 719.30.6 853 719.30BB 853 719.45.1 853 719.45.6 8 53 719.45BB 853 722.15.1 853 722.15.6 853 722.15BB 8
53 722.22.1 853 722.22.6 853 722.22BB 853 722.30.1 853 722.30.6 853 722.30BB 853 722.45.1 853 722.45.6 8 53 722.45BB 853 725.22.1 853 725.22.6 853 725.22BB 853 725.30.1 853 725.30.6 853 725.30BB 853 725.45.1 853 725.45.6 8 53 725.45BB 854 719.0 554 719.6 554 719.1 554 719.2 554 719.3 554 719.3/47.5 554 719.4/5 554 719.7 554 722.0 554 722.6 554 722.1 554 722.2 554 722.3 554 722.3/47.5 554 722.4/5 554 722.7 554 725.0 554 725.1 554 725.2 560 011.1 2160 013.1 2160 030 2160 031 2160 032 2160 033 2160 034 2160 035 2160 036 2160 037 2160 038 2160 039 2160 040 2160 041 2160 411.1 2160 412.1 2160 416.1 2160 417.1 2160 700.1 2060 700.2 2060 700.3 2060 700.4 2060 700.5 2060 700.9 2061 602 14
Item No. Page No.
BarnstapleUnit 1, Branham Crescent
Roundswell Business Park (West)Barnstaple, North Devon
EX31 3TD
T: 01271 311920F: 01271 311929
BristolUnit 8, Riverside Business Park
St. Annes Road, St. AnnesBristol BS4 4ED
T: 0117 300 3980F: 0117 980 3058
CardiffTy Cefnfor, Ocean Park
Cardiff CF24 5PE
T: 029 2047 1808F: 029 2049 0250
GatesheadUnit 1 Halifax Court
Halifax RoadDunston, Gateshead
Tyne & Wear NE11 9JT
T: 0191 461 4100F: 0191 461 4101
Glasgow4 Clifford Court
171 Woodville StreetIbrox Business ParkGlasgow G51 2RQ
T: 0141 445 8892F: 0141 445 8871
Kinmel BayUnit 37 Tir Llwyd Industrial Estate
St Asaph AvenueKinmel Bay, Rhyl
North Wales LL18 5JA
T: 01745 332151F: 01745 332493
While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.
© Laidlaw Solutions Limited November 2007/L104/001
As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 12 sales offices and trade counters.
Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.
Sales OfficeTrade CounterDistribution Centre
Liverpool3 - 5 Century Building
Summers RoadBrunswick Business Park
Liverpool, Merseyside L3 4BL
T: 0151 709 9438F: 0151 709 9455
LondonThe Building Centre
26 Store StreetLondon WC1E 7BT
T: 0207 436 0779F: 0207 436 0740
PerthPO Box 15, Arran Road
Perth PH1 3DU
T: 01738 620581F: 01738 633262
SalfordCenturion House
Dakota Avenue, SalfordManchester M50 2PU
T: 0161 848 0101F: 0161 872 9313
SheffieldUnit 4
Sheffield Industrial EstateSurbiton Street
Sheffield S9 2DN
T: 0114 243 8916F: 0114 242 6591
WillenhallStrawberry Lane
WillenhallWest Midlands
WV13 3RS
T: 01902 600400F: 01902 600490
Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars.
Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery.
RS 10508
To email a sales office use the following format: [email protected]
e.g. [email protected]
Timber DoorsetsSaving up to 40% installation time and eliminating co-ordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise on-site work.
Architectural HardwareLaidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards.
Handrail and Balustrade SolutionsUsing a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation.
www.laidlaw.neta
dv a
n ci n
g ar c h i t e c t u r a l i r o n m
o n ge
r y
g a i m e m b e r