Uni-Power for Retail, Banking, and, Hospitality
-
Upload
ip-utilinet -
Category
Technology
-
view
356 -
download
0
description
Transcript of Uni-Power for Retail, Banking, and, Hospitality
Grid-Lite
Uni-Power Smart System
GRID POWER
Choose from available AC and/or
DC distribution. Armstrong
FlexZone™ Grid ties simplify
installation and lower cost
through the elimination of
traditional wiring, conduit, and
installation labor.
POWER SUPPLY OPTIONS
AC to DC conversion provided
for one lamp, and up to 30 lamps
per power supply. Low Voltage
Wiring or choice in above ceiling
power bus bar or track lighting
extends the power supply ports.
Select from a range of storage
battery technologies.
OPTIONAL WIRELESS
CONTROLS
Advanced non battery powered
Wireless Controllers for AC
and/or DC systems. No more
holes in walls for switches. Now,
you can paint or wallpaper then
place your switch and remote
dimmer or choose a location that
suits your unique taste.
INTELLIGENT MONITORING
Available packaged and custom
software for monitoring and
management.
Reduce the consumption of energy up to 78%
without sacrificing the quality of service.
Demand Side Intelligent Managed Power (DSIMpower©)
IP UtiliNET achieves excellence in design, long life, low maintenance, simplified installation, and smart use of the
lowest cost power available. Uni-Power can support up to 30 Grid-Lites and is complemented by a series of
conversion components such as DC ballasts.
UNI_POWER
The system uses all available energy from locally generated sources (such as photovoltaic cells) first, then 'fills in'
with power from the grid or, when the grid is not available, from batteries. Power generated as DC (direct current)
is used as DC to support fixed DC loads such as DC lighting, DC ceiling fans, motor controls, and more. Since the
system never changes the power to AC it avoids power-robbing conversions, grid interconnection issues, and often
requires no utility permitting. Low-voltage controls allow lighting to be more easily connected to occupancy
sensors, low-voltage switches, and wireless energy management systems. The low-voltage control wiring makes it
safer and less expensive than traditional switching and control systems.
The evolution to advanced DC power lighting and switching is not a question of when it will be available, it is now a question of when to proceed and what components to use.
INNOVATIVE SOLUTIONS FOR FACILITY ENERGY NEEDS
UNI-POWER SPECIFICATIONS
Standards; UL2043, UL1310, UL1012,
UL2577, Emerge and Zigbee Alliance
registered, RoHS compliant
Weight; 21 lbs
Input Power; 208-240 VAC input; 1500 W
output
Alt. Input Power; 24.0 to 24.5 VDC, 65A
Max.
Channels; 16 Channel, Class 2, 24V DC Out
Efficiency; Quiescent Power; 7W, 90%
@240 VAC input; 1500 W output
Operating Environment; For dry or damp
locations, Temperature – 0 to 40 degrees C,
Humidity – 10% to 90% non-condensing
6825 Shiloh Road East,
STE B-7
Alpharetta, GA 30005
P (877) 901-6947
www.iputilinet.com [email protected]
Shown with Optional DC Power
and Renewables (LADER)
UNI-PWR