UMC Series p1 - WLS4839 101 3 0 1 3539 74 0 0 2 secondary lens or shield distribution no lens (st...
Transcript of UMC Series p1 - WLS4839 101 3 0 1 3539 74 0 0 2 secondary lens or shield distribution no lens (st...
SERIESUMCHOUSING - The driver compartments shall be one-piece die cast aluminum. The luminous rings shall be clear acrylic with an internal lens. The hood and spacers shall be heavy gauge and spun aluminum with hemmed edges for added rigidity. The hood wing assembly shall be fully sealed with a molded silicone gasket. All internal and external hardware shall be stainless steel. The hood wing assembly shall be fully sealed with a molded silicone gasket. the UMC is BUG rated
OPTICAL - All optical systems shall provide IES Types II, III, IV, V, Custom, distributions. Standard color temperatures shall be 2700K, 3000K, 3500K, 4000K, 5100K, and Amber. UMC offers MicroCore LED modules that independently aim each LED in both horizontal rotation and vertical tilt angle. LEDs shall be mounted to a metal printed circuit board assembly(PCBA) with a uniform conformal coating over the panel surface and electrical features. LED optics shall be clear injection molded PMMA acrylic. MicroCore PCBA and optic shall be sealed to a die-cast anodized aluminum heat sink with an injection molded silicone rubber gasket. IP66.Type 4 distribution with optional House Side Shield not available with clear or diffused glass lenses. Factory installed House Side Shield is optimized for Type 4 distribution and not recommended for use with Type 2 or 3 distribution and not available with type 5 distribution.
ELECTRICAL - All luminaries shall accept 120 thru 277 volt input with integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J. Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC. Drivers shall not be compatible with current sourcing dimmers, consult WLS for current list of known compatible dimming systems.
MOUNTING - The �xture shall be attached to the arm assembly with three stainless steel bolts.The connection shall be sealed with a silicone gasket. Post top arms and brackets shall slipover a 4"/100mm O.D. or a 5”/127mm as con�gured and secured with six stainless steel set screws. Wall mounted arms and brackets shall require mounting hardware by others.
FINISH - Fixture �nish consists of a �ve stage pretreatment regimen with a polymer primer sealer, oven dry o� and top coated with a thermoset super TGIC polyester powder coat �nish.The �nish shall meet the AAMA 605.2 performance speci�cation which included passing a 3000hour salt spray test for corrosion resistance.
CERTIFICATION - Listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std.C22.2 no.250 standard. Micro Core Optical arrays shall be constructed to IP66 standards.
SPECIFICATIONS
Approved By: Project Name:
Location: Date:
800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110
WLS LIGHTING SYSTEMS
Speci�cations subject to change without notice. 40 Rev. 5/16
DECORATIVE LED
LUMINAIRE PERFORMANCE
Secondary Lens or Shield Distribution System
Watts
3KDrive
Current (ma)
Delivered Lumens
Efficacy (lm/w)
Bug Rating
B U G
No Lens (Standard)
TYPE 2 6186 87 2 0 2
650 71
TYPE 3 6168 87 1 0 2TYPE 4 6081 86 1 0 2TYPE 5 6227 88 3 0 2
House Side Shield TYPE 4 4495 63 0 0 2
No Lens (Standard)
TYPE 2 4607 98 2 0 2
450 47
TYPE 3 4570 95 1 0 1TYPE 4 4570 97 1 0 2TYPE 5 4602 98 3 0 1
House Side Shield TYPE 4 3366 72 0 0 2
4K
Delivered Lumens
Efficacy (lm/w)
Bug Rating
B U G6561 92 2 0 26542 92 1 0 26449 91 1 0 26505 93 3 0 2
4768 67 0 0 2
4830 103 2 0 24791 100 1 0 24791 102 1 0 24825 103 3 0 1
3529 75 0 0 2
Secondary Lens or Shield Distribution
No Lens (Standard)
TYPE 2TYPE 3TYPE 4TYPE 5
House Side Shield TYPE 4
No Lens (Standard)
TYPE 2TYPE 3TYPE 4TYPE 5
House Side Shield TYPE 4
System Watts
Drive Current
(ma)
650 71
450 47
5K
Delivered Lumens
Efficacy (lm/w)
Bug Rating
B U G6579 92 2 0 26560 92 1 0 26467 91 1 0 26623 93 3 0 2
4781 67 0 0 2
4844 101 2 0 24805 101 1 0 24805 100 1 0 24839 101 3 0 1
3539 74 0 0 2
Secondary Lens or Shield
Distribution
No Lens (Standard)
TYPE 2TYPE 3TYPE 4TYPE 5
House Side Shield TYPE 4
No Lens (Standard)
TYPE 2TYPE 3TYPE 4TYPE 5
House Side Shield TYPE 4
System Watts
Drive Current
(ma)
650 71
450 47
DLC Quali�ed
Mounting
UMC DECORATIVE LED
ORDERING INFORMATION
UE - Universal Voltage (120-277)347 - 347VAC480 - 480 VAC
27K - 2700K ¹3K - 3000K¹35K - 3500K4K - 4200K5K - 5100KAM - >580 nm mono- chromatic amber ¹
ORDER:
700 - 71 watts450 - 48 wattsXMA - Custom wattage or drive current ¹
WLS-UMC
SERIES HOOD DISTRIBUTION COLOR TEMP LUMEN PACK FINISH OPTIONS VOLTAGE MOUNTING
SERIES
UMC-LUM ANG T5-32LED 27K 700 MTB BL-SCP UE PM-SLA2(EXAMPLE ORDER)
FTG - Clear �at glass lens ²SAG - Clear sag glass lens ¹,³ HSS - House side shield, for Type IVSLC - Unlit (luminous) elementFLD - Lightly di�used �nish on �at glass ³ lensR80 - 80 CRI, minimum¹BL - Blue inner lensRD - Red inner lensGRN - Green inner lensSCP - Integral photo- control and motion sensorSCPRM - Handheld commissioning tool
T2-32LED - Type IIT3-32LED- Type IIIT4-32LED - Type IVT5-32LED - Type VTX-32LED - Custom ¹
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Approved By: Project Name:
Location: Date:
800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110
Speci�cations subject to change without notice. 40 Rev. 5/16
NO LUMINOUS UMC - Without luminous element
LUMINOUS
UMC-WND - Luminous WindowUMC-SR - Luminous Solid RingsUMC-VSL - Luminous Vertical SlotsUMC-LUM - Luminous Rings
PM - Pole Mount SLA2 SLA4 SLA7(5) SLA8D SLA9-2 SLA10-2 SLA16-2 SLA17-2 SLA17(5)-2 SLA18-2 SLA20-2 SLA20A-2 SLA20B-2 SLA20C-2 SLA20D-2 SLA24 SLA24(5) TRA4 TRA7-2 TRA8-2 TRA9-2 SLA3 SLA4-2 SLA7-2 SLA7(5)-2 SLA9 SLA10 SLA16 SLA17 SLA17(5) SLA18 SLA20 SLA20A SLA20B SLA20C SLA20D SLA22D SLA24-2 SLA25(5)-2 TRA7 TRA8 TRA9WM - Wall Mount WMA4 WMA6 WMA9D WMA11 WMA16 WMA18 WMA22D WMA37 WMA39 WMA5 WMA8 WMA10 WMA12 WMA17 WMA20 WMA24 WMA38*Info on Page 4
WH - Arctic WhiteBL - BlackBLT - Matte BlackDGN - Dark GreenDB - Dark BronzeTT - TitaniumWDB - Weathered BronzeMDB - Metallic BronzeVBU - Verde BlueCRT - CortenMAL - Matte AluminumMG - Medium GreyAGN - Antique GreenLG - Light GreyRAL - Premium Color (Provide RAL)CC - Custom Color, consult factory
FLR - Flared HoodFLR-STS - Flared Hood, natural brushed stainless steelFLR-COP - Flared Hood, natural brushed copperANG - Angled Hood, ANG-STS - Angled Hood, natural brushed stainless steel ANG-COP - Angled Hood, natural brushed copperSTR - Straigh Hood, STR-STS - Straigh Hood, natural brushed stainless steelSTR-COP - Straigh Hood, natural brushed copper BEL - Bell Hood, BEL-STS - Bell Hood, natural brushed stainless steelBEL-COP - Bell Hood, natural brushed copper SKB - Skirted Bell Hood, SKB-STS - Skirted Bell Hood, natural brushed stainless steel SKB-COP - Skirted Bell Hood, natural brushed copper
1 - Contact Factory2 - Not for AM color temperature3 - Not for SCP contol options4 - Handheld commissioning tool is required to seperatly con�gure or adjust any number of SCP sensors
FOOTNOTES:
4
4
UMC DECORATIVE LED
SERIES
Approved By: Project Name:
Location: Date:
800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110
Speci�cations subject to change without notice. 40 Rev. 5/16
ANGLED HOOD CONFIGURATION UMC-ANG UMC-WND-ANG UMC-SR-ANG UMC-VSL-ANG UMC-LUM-ANGDIAMETER 20"/508mm 20"/508mm 20"/508mm 20"/508mm 20"/508mmHEIGHT 14.7"/373mm 20.5"/520mm 20.7"/526mm 20.5"/521mm 20.6"/523mmWEIGHT 18.25 lbs/8.28kg 21.75 lbs/9.86kg 25 lbs/11.3kg 22.25 lbs/10.1kg 24.25 lbs/11kgEPA .60 .72 .74 .72 .74
BELL HOOD CONFIGURATION UMC-BEL UMC-WND-BEL UMC-SR-BEL UMC-VSL-BEL UMC-LUM-BELDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 15.8"/401mm 21.4"/543mm 21.6"/549mm 19.37"/492mm 21.5"/546mmWEIGHT 20.25 lbs/9.2kg 23.5 lbs/10.6kg 27 lbs/12.25kg 24.25 lbs/11kg 26 lbs/11.8kgEPA .73 .85 .87 .85 .85
FLARE HOOD CONFIGURATION UMC-FLR UMC-WND-FLR UMC-SR-FLR UMC-VSL-FLR UMC-LUM-FLRDIAMETER 22"/559mm 22"/559mm 22"/559mm 22"/559mm 22"/559mmHEIGHT 14.5"/368mm 19.8"/503mm 20.1"/510mm 19.8"/503mm 20"/508mmWEIGHT 18.5 lbs/8.4kg 21.75 lbs/9.87kg 25.25 lbs/10.1kg 21.75 lbs/9.86kg 24.25 lbs/11kgEPA .53 .65 .67 .65 .67
STRAIGHT HOOD CONFIGURATION UMC-STR UMC-WND-STR UMC-SR-STR UMC-VSL-STR UMC-LUM-STRDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 14"/355mm 19.8"/503mm 20"/508mm 19.8"/503mm 19.9"/505mmWEIGHT 20 lbs/9.07kg 23.25 lbs/10.55kg 26.75 lbs/12.13kg 23.75 lbs/10.77kg 25.75 lbs/11.68kgEPA .59 .71 .73 .71 .73
SKIRTED BELL HOOD CONFIGURATION UMC-SKB UMC-WND-SKB UMC-SR-SKB UMC-VSL-SKB UMC-LUM-SKBDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 19.7"/500mm 23.9"/607mm 24.2"/615mm 23.9"/607mm 24.1"/612mmWEIGHT 20.5 lbs/9.3kg 23.75 lbs/10.77kg 27 lbs/12.25kg 24.25 lbs/11kg 26.25 lbs/11.9kgEPA .90 1.03 1.05 1.03 1.05
UCM-LUM-SKB
UMC DECORATIVE LED
SERIES
Approved By: Project Name:
Location: Date:
800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110
Speci�cations subject to change without notice. 40 Rev. 5/16
24.2 in
20.1 in 20.0 in
500 mm
24.0 in610 mm
6 in152 mm
6 in152 mm
WMA 8 Backplate is 12 "/305mm x 6 "/150mm WT: 10 lbs.
24.0"610mm
6"152mm
6"152mm
20.0"500mm
48.1 in
25.2 in 25.0 in
635 mm
48.0 in1220 mm
5 in127 mm
6 in152 mm
WMA 11 Backplate is 26 "/660mm x 6 "/150mmWT: 10 lbs.
5"127mm
6"152mm
25.0"635mm
48.0"1220mm
39.4 in
27.0 in 27.0 in
670 mm
39.0 in990 mm
1 1/2 in38 mm
6 in152 mm
WMA 12 Backplate is 12 "/305mm x 6 "/150mm
WT: 12 lbs.
1.50"38mm
6"152mm
27.0"670mm
39"990mm
28.5 in 28.0 in
710 mm
44.2 in 44.0 in1120 mm
6 in152 mm
9 in229 mm
WMA 16 Backplate is 44 "/112 0mm x 6 "/150mmWT: 22 lbs.
44.0"1120mm
28.0"710mm
9"229mm
6"152mm
26.0 in/660mm34.0 in/864mm*
40.0 in/1015mm46.5 in/1180mm*
SLA 17 Slips over 4"/100mm O.D. pole.
WT: 18 lbs. E P A: 1.50 *SLA 17(5) Slips over 5 "/127mm O.D. pole.
WT: 24 lbs. E P A: 2.20
Strap painted to match �xture color.
40"/1015mm46.5"/1180mm*
26"/660mm34"/864mm
30.0 in 762 mm
28.0 in710 mm
SLA 18 Slips over 4 "/100mm O.D. pole. WT: 12 lbs. E P A: .85
28"710mm
30"762mm
31.0 in 31.0 in787 mm
24.75 in630 mm
31.0 in 31.0 in787 mm
28.0 in710 mm
SLA 18-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 22 lbs. E P A: 1.59
31"787mm
28"710mm
52.0 in/1320mm68.0 in/1727mm*
40.0 in/1015mm46.5 in/1180mm*
SLA 17-2 Twin arms, slips over 4"/100mm O.D. pole.
WT : 24 lbs. E P A: 2.05*SLA 17(5)-2 Twin arms, slips over 5"/127mm O.D. pole.
WT: 33 lbs. E P A: 2.90
Straps painted to match �xture color.
40"/1015mm46.5"/1180mm*
52"/1320mm68"/1727mm
41.1 in 41.0 in1040 mm
30.1 in 30.0 in
970 mm
SLA 16 Slips over 4 "/100mm O.D. pole. WT: 18 lbs. E P A: 2.88
41"1040mm
30"970mm
41.1 in mm
60.0 in 60.0 in1525 mm
41.0 in1040 mm
SLA 16-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 28 lbs. E P A: 4.38
60"1525mm
41"1040mm
10.5 in/267mm
19.5 in/495mm
SLA 20 Slips over 4 "/100mm O.D. pole. WT: 10 lbs. E P A: .70
10.5"267mm
19.5"495mm
39.0 in990 mm
10.5 in/267mm
SLA 20-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 18 lbs. E P A: 1.25
10.5"267mm
39"990mm
39.0 in 39.0 in
990 mm
27.9 in 32.0 in815 mm
SLA 20A-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 26 lbs. E P A: 1.94
32"815mm
39"990mm
19.4 in 19.5 in
495 mm
27.9 in 32.0 in815 mm
SLA 20A Slips over 4 "/100mm O.D. pole. WT: 15 lbs. E P A: 1.30
32"4815mm
19.5"495mm
19.4 in 19.5 in495 mm
27.9 in 32.0 in815 mm
SLA 20B Slips over 4"/100mm O.D. pole.
WT: 14 lbs. E P A: 1.14
32"815mm
19.5"495mm
27.9 in 32.0 in815 mm
39.0 in 39.0 in
990 mm
SLA 20B-2 Twin arms, slips over 4"/100mm O.D. pole.WT: 24 lbs. E P A: 1.70
32"815mm
39"990mm
34.0 in 32.0 in815 mm
39.0 in 39.0 in
990 mm
SLA 20C-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 26 lbs. E P A: 1.91
32"815mm
39"990mm
19.3 in 19.5in495 mm
26.0 in/660mm
SLA 20D Slips over 4 "/100mm O.D. pole. WT: 12 lbs. E P A: .75
Strap painted to match �xture color.
26"660mm
19.5"495mm 39.0 in 39.0 in
990 mm
26.0 in/660mm
SLA 20D-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 21 lbs. E P A: 1.18
Straps painted to
match �xture color.
26"660mm
39"990mm
38.0 in/965mm42.0 in/1070mm*
21.0 in/535mm27.0 in/685mm*
SLA 24 Slips over 4"/100mm O.D. pole.
WT: 9 lbs. E P A:.85 *SLA 24(5) Slips over 5 "/127mm pole. WT: 11 lbs. E P A: 1.17
38"/965mm42"/1070mm*
21"/535mm27"/6850mm
38.0 in/965mm42.0 in/1070mm*
42.0 in/1070mm56.0 in/1422mm*
SLA 24-2 Twin arms, slips over 4"/100mm O.D. pole. WT: 14 lbs. E P A: 1.59
*SLA 24(5)-2 Twin arms, slips over 5 "/127mm pole. WT: 16 lbs. E P A: 1.81
38"/965mm42"/1070mm*
42"/1070mm56"/1422mm
34.0 in 32.0 in815 mm
19.4 in 19.5 in
495 mm
SLA 20C Slips over 4 "/100mm O.D. pole. WT: 15 lbs. E P A: 1.39
32"815mm
19.5"495mm
25.0 in 25.0 in
635 mm
36.1 in 36.0 in
915 mm
5 1/8 in
6 in152 mm
130 mm
WMA 17 Backplate is 36 "/915mm x 6 "/150mm WT: 15 lbs.
Strap painted to match �xture color.
36.0"915mm
25.0"635mm
6"152mm
5.125"130mm
25.0 in 25.0 in
635 mm
26.1 in 26.0 in660 mm
5 in127 mm
6 in152 mm
WMA 18 Backplate is 26 "/660mm x 6 "/150mm
WT:18 lbs.
6"152mm
5"127mm
26"660mm
25"635mm
WMA 20 Backplate is 10 "/255mm x 8 "/205mm WT: 12 lbs.
17.6 in 19.5 in495 mm
10.1 in 10.0 in
255 mm
8 in203 mm
5 in127 mm
8"203mm
5"127mm
10"255mm
19.5"495mm
WMA 24 Backplate is 26 "/660mm x 6 "/150mmWT: 12 lbs.
22.6 in
31.0 in
22.5 in575 mm
31.0 in790 mm
6 in152 mm
16 in406 mm
31"790mm16"
406mm
22.5"575mm
6"152mm