Ultrasonic Transducers · instruments and transducers for ultrasonic nondestructive testing (UT)....
Transcript of Ultrasonic Transducers · instruments and transducers for ultrasonic nondestructive testing (UT)....
July 2002 EditionUltrasonicTransducers
AgfaNDT.comYour Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
General Information
Krautkramer— The World Leader
Krautkramer is the world’s largest designer, manufacturer, and marketer of high technology
instruments and transducers for ultrasonic nondestructive testing (UT). Our products include flaw
detectors, thickness gauges, hardness testers, inspection systems, UT software, ultrasonic
transducers, and eddy current instruments and probes. Krautkramer is a division of Emerson Electric
and has worldwide manufacturing and product support bases. Our main manufacturing centers are in
Lewistown, Pennsylvania, USA, and Cologne, Germany. We also have direct facilities in Japan, United
Kingdom, France, and Italy, as well as worldwide representatives. All of our direct facilities and many
of our representative facilities have full service capabilities. A full list of worldwide representatives is
available from Krautkramer or on the Internet at www.krautkramer.com.
Ultrasonic Transducers for Every Application
Krautkramer offers over 4000 standard and special ultrasonic transducers and accessories for
virtually every application. This catalog describes our extensive range of standard transducers and
related accessories. For applications that require a non-standard product, we proudly offer the most
comprehensive special probe and applications services available anywhere. Refer to the Special
Probes and Applications section of this catalog for more information.
Fast Delivery
Because we know that fast delivery is a must for most of our customers, we stock over 500 of the
commonly used products in this catalog. If your first choice is not available from stock, a product
specialist can often recommend a suitable substitute. When not available from stock, most standard
products in this catalog can be shipped in less than two weeks. As a certified Class A MRPII
manufacturer, Krautkramer employs state-of-the-art control systems and manufacturing methods to
assure timely delivery of a reliable product.
The Best Quality and Service
Our quality program is certified to the international quality standard
ISO-9001. This enables Krautkramer to quickly serve the marketplace
with products of exceptional quality and value. Krautkramer’s
commitment to providing the very best customer service is evidenced
by ongoing investments in manufacturing technology and productivity
enhancing capital equipment.
New Products
Numerous products are included in this catalog for the first time. Below are a few of the most important ones:
• Look for new Benchmark Series probes throughout the catalog. Made with proprietary
BENCHMARK COMPOSITE® active elements, they offer incredible penetration and excellent
resolution. Refer to the Transducer Performance section of the catalog for more information.
• Use new XLC Extended Life Contact probes for long service life in the most abusive applications.
• Try the new K-PEN 20 MHz pencil type probe on parts with sharp curves or limited access.
• Use the HT400A high temperature probe to test materials at temperatures to 1000°F.
• Save time and money with FASTTM probes, designed for high speed, manual weld scanning.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
1
Table of Contents
How to Order ........................................ 1
Transducer Performance
Alpha Series Features ...................... 2
Benchmark Series Features ............. 2
Gamma Series Features .................. 2
Frequency Color Coding ................... 2
Contact Transducers
RHP Style Standard ......................... 3
XLC Style Extended Life ................... 3
F Style Fingertip .............................. 4
Delay Line Contact Transducers
DFR Style Removable Delay ............. 4
K-PEN Pencil Type Probe .................. 5
ZIP Probes ...................................... 5
Protective Face Contact Transducers
PFCR/PFCS Combination Styles ....... 6
PMCR/PMCS Membrane Styles ........ 7
PWCCR/PWCCS Styles .................... 8
Angle Beam Transducers
SWS/AWS Styles, Gamma ............... 9
SWS/AWS Styles, Benchmark ........ 10
Miniature Angle Beam Transducers
MSW-QC Quick Change, Gamma ..... 11
MSW-QC, Alpha & Benchmark ........ 12
MSWS Style (Captive Screws) ........ 13
ABFP Style (Potted Wedge) ............. 14
SMSWS Style (Subminiature) ......... 14
Fingertip Dual Element Transducers
ADP Style (Potted Cable) ................ 15
RC Dual Style (Replaceable Cable) . 15
FDU Style (Replaceable Cable) ....... 15
High Temperature Dual Element Transducers
HT400A (to 1000° F) ..................... 15
KBA560V (to 750° F) ..................... 15
Standard Dual Element Transducers
DU Style (Replaceable Delay) ......... 16
DU-F Style, Benchmark Series ........ 16
FASTTM Probes ............................... 16
Immersion Transducers
ISS/IS Styles ................................ 17
IPS/IR Styles ................................ 18
Velocity System Transducers .......... 19
Near Field and Focusing Information . 19
Thickness Gauging Transducers
Precision Gauging .......................... 20
Dual Element Corrosion Gauging .... 21
Special Probes and Applications Laboratory
Special Probes & Applications ........ 22
Phased Array Transducers .............. 23
Inquiry Form.................................. 24
Accessories
Cables/Adaptors/Search Tubes ..... 25
Couplants ..................................... 26
Test Blocks ................................... 27
Transducer Certification ...................... 29
Tables and Formulas ........................... 30
Transducer Kits ............. Inside Back Cover
How To Order• Order by Product Code: Tables on each page give Product Codes by frequency, size, and style.
• Phone: (717) 242-0327. Ask for the Sales Department. After hours, use our voice mail system.
• Fax: (717) 242-2606
• Mail: Sales Department, Krautkramer, 50 Industrial Park Road, Lewistown, PA 17044
• Contact your local Sales Representative: See our site on the web at www.krautkramer.com or call
our Sales Department
• If you need assistance: Call (717) 242-0327 and ask for a Transducer Product Specialist.
• VISA and MasterCard accepted in North America when you order through our Lewistown, PA office.
Page Page
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
2
Transducer Performance
Krautkramer offers three series of transducers: Alpha, Gamma, and new Benchmark. To determine
which of these series is best for your application, please read the technical information on this page.
If you need assistance, contact one of our Transducer Product Specialists (717-242-0327) or your local
sales representative. Real time waveform and frequency certification is included with every transducer
at no charge (refer to the Technical Information section for details).
)zHM(ycneuqerF 05. 0.1 52.2 05.3 00.5 00.01
roloC yarG deR wolleY eulB neerG kcalB
• Recommended for applications where resolution is the primary consideration.
• Suitable for applications such as thickness measurement and near-surface
flaw detection.
• Very short pulse— mechanically damped to the limit of current technology.
• Gain is usually lower than that of the Gamma and Benchmark Series.
• Broadband— typical 6 dB bandwidths range from 50% to 100%.
• Typical Alpha waveforms (right) exhibit one to two full ring cycles, depending
on frequency, size and other parameters.
• Proprietary BENCHMARK COMPOSITE® (piezocomposite) active elements.
• Penetration in attenuative materials is far superior to conventional transducers.
• High signal to noise on coarse grain metals, fiber reinforced composites, et al.
• Short pulse— resolution usually superior to Gamma Series.
• Gain is usually higher than that of the Gamma and Alpha Series.
• Very broadband— typical 6 dB bandwidths range from 60% to 120%.
• Low acoustic impedance element improves performance of angle beam,
delay line, and immersion probes— excellent match to plastic and water.
• General purpose transducers, recommended for the majority of applications.
• Medium pulse, medium damping— best combination of gain and resolution
• Matching electrical network ensures maximum gain and optimum waveform
for general use.
• Medium bandwidth— typical 6 dB bandwidths range from 30% to 50%.
• Typical Gamma waveform exhibits three to four full ring cycles, depending on
frequency, size and other parameters.
For easy identification of frequency, most Krautkramer transducers are color coded as follows:
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
3
Contact Transducers
Single Element Contact Transducers are longitudinal wave transducers designed for general purpose
manual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducers
provide high sensitivity for better penetration and are ruggedly constructed for extended service life
under the roughest testing conditions.
tnemelE
retemaiDA B
005. 51.1 05.1
057. 04.1 05.1
000.1 56.1 05.1
Standard Contact Transducers— RHP and XLC Styles
RHP and XLC Style Contacts
Standard Contact Transducers are designed for abusive “scrubbing”
applications. Gamma series are for applications where sensitivity and
penetration are essential. Alpha series have maximum bandwidth for
axial resolution. RHP style probes feature ceramic
wearplates for the best combination of acoustic matching
and durability and stainless steel housings to resist
corrosion. New XLC (Extended Life Contact) style probes
have special, high durability wearplates for the most
abusive applications. Both styles feature an improved
comfort grip and color band for frequency identification.
CR models have right angle mounted BNC connectors
and the CS models have top-mounted BNC connectors.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
seirosseccAelytS
ahplA
seireS
ammaG
seireS
5.
057.PHR
PHR
RC-340-052
SC-321-052
selbaC
CNB'6
610-C
OMEL'6
810-C
00.1PHR
PHR
RC-340-062
SC-321-062
0.1
005.PHR
PHR
RC-340-142
SC-321-142
057.PHR
PHR
RC-340-152
SC-321-152
00.1
PHR
PHR
CLX
CLX
RC-340-162
SC-321-162
RC-050-162
SC-051-162
52.2
005.
PHR
PHR
CLX
CLX
RC-340-241
SC-321-241
RC-340-242
SC-321-242
RC-050-242
SC-051-242
057.
PHR
PHR
CLX
CLX
RC-340-251
SC-321-251
RC-340-252
SC-321-252
RC-050-252
SC-051-252
00.1
PHR
PHR
CLX
CLX
RC-340-261
SC-321-261
RC-340-262
SC-321-262
RC-050-262
SC-051-262
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
elytSahplA
seireS
ammaG
seireSseirosseccA
5.3
005.
PHR
PHR
CLX
CLX
RC-340-342
SC-321-342
RC-050-342
SC-051-342
selbaC
CNB'6
610-C
OMEL'6
810-C
057.
PHR
PHR
CLX
CLX
RC-340-352
SC-321-352
RC-050-352
SC-051-352
00.1
PHR
PHR
CLX
CLX
RC-340-362
SC-321-362
RC-050-362
SC-051-362
0.5
005.PHR
PHR
RC-340-441
SC-321-441
RC-340-442
SC-321-442
057.PHR
PHR
RC-340-451
SC-321-451
RC-340-452
SC-321-452
00.1PHR
PHR
RC-340-461
SC-321-461
RC-340-462
SC-321-462
0.01 005.PHR
PHR
RC-340-642
SC-321-642
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
4
Contact Transducers
Single Element Contact Transducers are longitudinal wave transducers
designed for general purpose manual ultrasonic inspection where test
materials are relatively flat and smooth. Contact transducers provide
high sensitivity for better penetration and are ruggedly constructed
for extended service life under the roughest testing conditions.
F Style Contact
F Style Contact transducers are small diameter fingertip probes
with a right angle mounted Microdot connector. Gamma Series
are recommended for applications where high sensitivity
and penetration are essential. Alpha Series are designed
for optimum damping and resolution. Benchmark Series,
with Benchmark Composite® elements, are best for
punching through highly attenuative materials.
tnemelE
retemaiDA B
052. 05. 66.
573. 36. 66.
005. 57. 66.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
kramhcneB
seireS
ahplA
seireS
ammaG
seireSseirosseccA
kramhcneB
seireS
ahplA
seireS
ammaG
seireSseirosseccA
52.2
052. 000-228 000-221 000-222
selbaC
CNB'6
210-C
OMEL'6
220-C
0.5
052. 000-428 000-421 000-422
selbaC
CNB'6
210-C
OMEL'6
220-C
573. 000-238 000-231 000-232 573. 000-438 000-431 000-432
005. 000-248 000-241 000-242 005. 000-448 000-441 000-442
5.3
052. 000-321 000-322
0.01
052. 000-621 000-622
573. 000-331 000-332 573. 000-631 000-632
005. 000-341 000-342 005. 000-641 000-642
Fingertip Contact Transducers— F Style
DFR Style Removable Delay Line Contact
DFR Style Removable Delay Line Fingertip Transducers are specifically
designed for thickness gauging and flaw detection of thin materials.
High frequency and critical damping results in a high performance
transducer, which exhibits excellent resolution capability. All DFR Style
Transducers have right angle mounted Microdot connectors.
tnemelE
retemaiDA B C
ro521.
052.15. 538. 03.
005. 578. 573.1 595.
RFD-iniM
521. 14. 567. 91.
.qerF)zHM(
eziS).ni(
SEDOCTCUDORP
ahplAseireS
eniLyaleDgL"83.KP-01
eniLyaleDgL"5.KP-01
seirosseccA
52.2052. 066-221 050-D 150-D
selbaC
CNB'6210-C
OMEL'6220-C
eniLyaleDtnalpuoC
047-DX
gnirpSdedaoL
EEVkcolB*700-H
005. 005-041 250-D
5.3 052. 066-321 050-D 150-D
0.5052. 066-421 050-D 150-D
005. 066-441 250-D
0.01052. 066-621 050-D 150-D
005. 06-041 2 250-D
0.51 052. 066-721 050-D 150-D
0.22 521. 066-811 050-D 150-D
0.52 052. 066-921 050-D 150-D
RFD-iniM0.02
521. 056-815 205-DM
Removable Delay Line— DFR Style
*H-007 fits .125² and .25² units only with exception of Mini DFR.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
5
Contact Transducers
Single Element Contact Transducers are longitudinal wave transducers designed for general purpose
manual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducers
provide high sensitivity for better penetration and are ruggedly constructed for extended service life
under the roughest testing conditions.
K-PEN Replaceable Delay Line Pencil Probe
K-PEN' s are high resolution pencil type probes. They are
designed for applications requiring an extremely small
contact area, such as tightly curved surfaces of turbine
blades or remaining wall thickness measurements from a
pit bottom. They can be used with most flaw detectors,
precision thickness gauges, and general pulser / receiver
units. Probes come with interchangeable delay tips that are
tapered to a .065" and .090" contact diameter.
Replacement delays are available in packs of 10. The
straight model fetures a removable handle, which also
allows it to be used as a fingertip probe. All models have
Microdot connectors.
.qerF
)zHM(
SEDOCTCUDORP
thgiartS
NEP-K
°54
NEP-K
elgnAthgiR
NEP-K
yaleDpiT"560.
KP-01
yaleDpiT"090.
KP-01
CNB'6
elbaC
5.7 002-240-983 088-240-983 078-240-983
901-300-783 011-300-783 210-C
0.02 092-030-983 072-140-983 066-040-983
ZIP Probes for Testing Composite and Other
Attenuative Plastics
Zero Interface (ZIP) Probes are highly damped, low
frequency delay line transducers designed for composite
inspection. ZIP delay lines are acoustically matched to
most composite and other plastic materials. This
eliminates or minimizes the delay line interface echo,
significantly improving near surface resolution. The low
frequency characteristics of ZIPs make them excellent for
penetrating thick or highly attenuative cross-sections.
ZIPs can also be used on many smooth surfaced
materials without couplant.
.qerF
)zHM(
eziS
).ni(
TCUDORP
SEDOC
SEDOCTCUDORP
selbaC eniLyaleD
54.0 00.1 031-065CNB'6
610-C170-D
5.1 005. 131-065 CNB'6
210-C
270-D
52.2 573. 231-065 370-D
Zero Interface Probes (ZIP)
K-PEN Probes
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
6
Contact Transducers
Single Element Contact Transducers are longitudinal wave
transducers designed for general purpose manual ultrasonic
inspection where test materials are relatively flat and smooth.
Contact transducers provide high sensitivity for better
penetration and are ruggedly constructed for extended
service life under the roughest testing conditions.
PFCR and PFCS Style Contacts
The Protective Face Combination transducers are designed
to allow one basic transducer to be used with three different
types of protective face: membrane, wear cap, or delay line. All
models have BNC connectors, PFCR are right angle mount and
PFCS are top-mount.
Style PM Kit includes a knurled ring, gland nut, wrench, 12
membranes, and a 2 oz. bottle of couplant (transducer not included).
Style PWC Kit includes a knurled ring, three wear caps, and a
2 oz. bottle of couplant (transducer not included). This option
may not be usable if near surface resolution is critical.
Style PHTD Kit includes a knurled ring, either 1″ or 1.5″ long high
temperature delay line, and a 2 oz. bottle of couplant (transducer not included).
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
seireSammaG
elytSRCFP
seireSammaG
elytSSCFP
seireSammaG
elytSRCFP
seireSammaG
elytSSCFP
0.1
005. 042-142 062-142
5.3
005. 042-342 062-342
057. 042-152 062-152 057. 042-352 062-352
00.1 042-162 062-162 00.1 042-362 062-362
521.1 042-172 062-172
52.2
005. 042-242 062-242
0.5
005. 042-442 062-442
057. 042-252 062-252 057. 042-452 062-452
00.1 042-262 062-262 00.1 042-462 062-462
521.1 042-272 062-272
Protective Face Combination Transducers— PFCR / PFCS Style
Protective Face Option Kits— PFCR / PFCS
* High Temp (PHTD) delay line: maximum temperature 400°F,
maximum contact time 10 seconds; cool to ambient before reuse.
tiK
elytS
SEDOCTCUDORP
retemaiDtnemelErecudsnarT
"005. "057. "00.1 "521.1
MP 021-KP 041-KP 061-KP 081-KP
CWP 022-KP 042-KP 062-KP 082-KP
*)yaleD"1(DTHP 023-KP 043-KP 063-KP 083-KP
*)yaleD"5.1(DTHP 024-KP 044-KP 064-KP 084-KP
Accessories— PFCR / PFCS
SEDOCTCUDORP
retemaiDtnemelErecudsnarT
"005. "057. "00.1 "521.1
senarbmeMerapS
.scp21fo.gkP020-MP 120-MP 220-MP 320-MP
spacraeWerapS
.scp21fo.gkP321-CP 221-CP 121-CP 021-CP
*eniLyaleD.pmeT-iH
gnoL"0.1720-DP 130-DP 530-DP 930-DP
*eniLyaleD.pmeT-iH
gnoL"5.1920-DP 330-DP 730-DP 140-DP
elbaCCNB'6 610-C
&paCraeW,enarbmeM
tnalpuoCeniLyaleD047-DX
tnemelE
retemaiDA B C
005. 57. 02.1 49.
057. 00.1 02.1 91.1
000.1 52.1 02.1 44.1
521.1 83.1 53.1 75.1
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
7
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
seireSammaGsenarbmeM
nezod1seirosseccA seireSammaG
senarbmeM
nezod1seirosseccA
0.1
005.RCMP-142-142
SCMP-162-142020-MP
selbaC
CNB'6
610-C
OMEL'6
810-C
enarbmeM
tnalpuoC
047-DX
5.3
005.RCMP-142-342
SCMP-162-342020-MP
selbaC
CNB'6
610-C
OMEL'6
810-C
enarbmeM
tnalpuoC
047-DX
057.RCMP-142-152
SCMP-162-152120-MP 057.
RCMP-142-352
SCMP-162-352120-MP
00.1RCMP-142-162
SCMP-162-162220-MP 00.1
RCMP-142-362
SCMP-162-362220-MP
521.1RCMP-142-172
SCMP-162-172320-MP
52.2
005.RCMP-142-242
SCMP-162-242020-MP
0.5
005.RCMP-142-442
SCMP-162-442020-MP
057.RCMP-142-252
SCMP-162-252120-MP 057.
RCMP-142-452
SCMP-162-452120-MP
00.1RCMP-142-262
SCMP-162-262220-MP 00.1
RCMP-142-462
SCMP-162-462220-MP
521.1RCMP-142-272
SCMP-162-272320-MP
Protective Membrane Transducers— PMCR/PMCS Style
Contact Transducers
Single Element Contact Transducers are longitudinal wave transducers designed for general purpose
manual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducers
provide high sensitivity for better penetration and are ruggedly constructed for extended service life
under the roughest testing conditions.
tnemelE
retemaiDA B
005. 31.1 57.1
057. 14.1 57.1
000.1 36.1 57.1
521.1 36.1 57.1
PMCR and PMCS Style Contacts
Protective Membrane Contact Transducers are
excellent for coupling to rough or uneven surfaces.
The membrane will conform to surface
irregularities providing better coupling to the test
material. PMCR and PMCS Style contacts are
designed for quick, easy membrane replacement
and have color-coded grips identifying transducer
frequency. The PMCR Style has right angle BNC
connectors while the PMCS Style has straight
top-mount BNC connectors.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
8
tnemelE
retemaiDA B
005. 0.1 21.1
057. 52.1 21.1
000.1 05.1 21.1
Protective Wear Cap/Delay Line Transducers— PWCCR/PWCCS
Contact Transducers
Single Element Contact Transducers are longitudinal wave transducers designed for general purpose
manual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducers
provide high sensitivity for better penetration and are ruggedly constructed for extended service life
under the roughest testing conditions.
PWCCR and PWCCS Style Contacts
Protective Wear Cap Contact Transducers have
expendable wear caps which are easily replaced
when worn. This means unlimited economy when
the job calls for “scrubbing” which would normally
destroy a standard contact probe. The PWCCR
Style has right angle mounted BNC connectors
while the PWCCS Style has straight top-mount BNC
connectors. High temperature delay lines are also
available for applications to 400°F.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
ammaG
seireS
paCraeW
tiK.cp01
yaleDTH
*tiKeniL seirosseccA
ammaG
seireS
paCraeW
tiK.cp01
yaleDTH
*tiKeniL seirosseccA
0.1
005.RCCWP-052-142
SCCWP-072-142 122-CP
"1-050-KP
"5.1-060-KPselbaC
CNB'6
610-C
OMEL'6
810-C
paCraeW
tnalpuoC
047-DX
5.3
005.RCCWP-052-342
SCCWP-072-342 122-CP
"1-050-KP
"5.1-060-KPselbaC
CNB'6
610-C
OMEL'6
810-C
paCraeW
tnalpuoC
047-DX
057.RCCWP-052-152
SCCWP-072-152 142-CP
"1-070-KP
"5.1-080-KP 057.RCCWP-052-352
SCCWP-072-352 142-CP
"1-070-KP
"5.1-080-KP
00.1RCCWP-052-162
SCCWP-072-162 162-CP
"1-090-KP
"5.1-001-KP 00.1RCCWP-052-362
SCCWP-072-362 162-CP
"1-090-KP
"5.1-001-KP
52.2
005.RCCWP-052-242
SCCWP-072-242 122-CP
"1-050-KP
"5.1-060-KP
0.5
005.RCCWP-052-442
SCCWP-072-442 122-CP
"1-050-KP
"5.1-060-KP
057.RCCWP-052-252
SCCWP-072-252 142-CP
"1-070-KP
"5.1-080-KP 057.RCCWP-052-452
SCCWP-072-452 142-CP
"1-070-KP
"5.1-080-KP
00.1RCCWP-052-262
SCCWP-072-262 162-CP
"1-090-KP
"5.1-001-KP 00.1RCCWP-052-462
SCCWP-072-462 162-CP
"1-090-KP
"5.1-001-KP
* High Temp (HT) Delay Line: maximum temperature 400°F, maximum contact time 10 seconds; cool to ambient before reuse.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
9
SWS and AWS Style Angle Beam, Gamma Series
SWS and AWS Style Angle Beam Transducers are designed
to fit on removable wedges. Refracted shear wave angles
may be specified as required. The AWS series are
designed to meet or exceed all of the requirements
outlined in AWS Structural Welding Code D1.1. All
SWS and AWS transducers utilize captive screws for
fastening the probe to the wedge and have top-mount
BNC connectors. High temperature wedges are for
temperatures up to 400° F.
Angle Beam Transducers
Angle Beam Transducers are single or dual element
transducers designed for weld inspection or flaw
detection where flaws have an angular orientation
with respect to the material surface. Weld
inspections are performed using shear waves
refracted from a longitudinal wave by means of a
lucite wedge. Lucite wedges are designed to
produce shear waves of a particular angle in a
specified material with minimal wedge noise.
tnemelE
eziSA B C D
.aid05. 27. 0.1 57. 18.
0.1x05. 527. 15.1 57. 13.1
0.1x57. 00.1 5.1 57. 13.1
.aid0.1 22.1 56.1 57. 83.1
526.x526. 527. 52.1 57. 00.1
057.x526. 527. 52.1 57. 00.1
057.x057. 58. 52.1 57. 00.1
.qerF)zHM(
eziS).ni(
SEDOCTCUDORP.qerF)zHM(
eziS).ni(
SEDOCTCUDORP
ammaGseireS
dradnatSegdeW
pmeT-iH*egdeW
seirosseccAammaGseireS
dradnatSegdeW
pmeT-iH*egdeW
seirosseccA
5. aiD0.1 006-062
°54120-W°06220-W°07320-W°09520-W
°54180-W°06280-W°07380-W
selbaC
CNB'6610-C
OMEL'6810-C
egdeWtnalpuoC
047-DX
52.2SWAseireS
36.x36. 306-292°54401-W°06501-W°07601-W
selbaC
CNB'6610-C
OMEL'6810-C
egdeWtnalpuoC
047-DX
0.1
aiD5. 006-142
°54900-W°06010-W°07110-W°09310-W
°54670-W°06770-W°07870-W
57.x36. 106-292
°54401-W°06501-W°07601-W
1x5. 006-192
°54510-W°06610-W°07710-W°09910-W
°54070-W°06680-W°07170-W
57.x57. 406-292
°54401-W°06501-W°07601-W
1x57. 506-192
°54150-W°06250-W°07-350-W°09450-W
5.3
aiD5. 006-342
°54900-W°06010-W°07110-W°09310-W
°54670-W°06770-W°07870-W
aiD0.1 006-162
°54120-W°06220-W°07320-W°09520-W
°54180-W°06280-W°07380-W
1x5. 006-392
°54510-W°06610-W°07710-W°09910-W
°54070-W°06680-W°07170-W
52.2
aiD5. 006-242
°54900-W°06010-W°07110-W°09310-W
°54670-W°06770-W°07870-W
1x57. 506-392
°54150-W°06250-W°07-350-W°09450-W
1x5. 006-292
°54510-W°06610-W°07710-W°09910-W
°54070-W°06680-W°07170-W
aiD0.1 006-362
°54120-W°06220-W°07320-W°09520-W
°54180-W°06280-W°07380-W
1x57. 506-292
°54150-W°06250-W°07350-W°09450-W
0.5
aiD5. 006-442
°54900-W°06010-W°07110-W°09310-W
°54670-W°06770-W°07870-W
aiD0.1 006-262
°54120-W°06220-W°07320-W°09520-W
°54180-W°06280-W°07380-W
1x5. 006-492
°54510-W°06610-W°07710-W°09910-W
°54070-W°06680-W°07170-W
1x57. 506-492
°54150-W°06250-W°07350-W°09450-W
aiD0.1 006-462
°54120-W°06220-W°07320-W°09520-W
°54180-W°06280-W°07380-W
Standard Angle Beam— SWS and AWS Styles, Gamma Series
* Duty Cycle: at 400°F, maximum contact time is 10 seconds; cool to
ambient before reuse.
Note: Standard wedge angles are specified for carbon steel.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
10
Angle Beam Transducers
Angle Beam Transducers are single or dual element
transducers designed for weld inspection or flaw detection
where flaws have an angular orientation with respect to
the material surface. Weld inspections are performed
using shear waves refracted from a longitudinal wave by
means of a lucite wedge. Lucite wedges are designed to
produce shear waves of a particular angle in a specified
material with minimal wedge noise.
SWS and AWS Style Angle Beam, Benchmark Series
Benchmark series SWS and AWS Style Angle Beam Transducers feature proprietary BENCHMARK
COMPOSITE® active elements. They are available in the same range of sizes and fit the same
removable wedges as the Gamma series. Benchmark series offer a superior combination of
sensitivity, resolution, and penetration for punching through highly attenuative materials. They are
especially beneficial when signal to noise ratio is a problem, for example coarse grain materials and
fiber reinforced composites. The AWS models meet all requirements of Structural Welding Code D1.1.
SEDOCTCUDORP SEDOCTCUDORP
.qerF
)zHM(
eziS
).ni(
kramhcneB
seireS
dradnatS
egdeWseirosseccA
.qerF
)zHM(
eziS
).ni(
kramhcneB
seireS
dradnatS
egdeWseirosseccA
0.1
aiD5. 006-148
°54900-W
°06010-W
°07110-W
°09310-W
selbaC
CNB'6
610-C
OMEL'6
810-C
egdeW
tnalpuoC
047-DX
5.3
aiD5. 006-348
°54900-W
°06010-W
°07110-W
°09310-W
selbaC
CNB'6
610-C
OMEL'6
810-C
egdeW
tnalpuoC
047-DX
1x5. 006-198
°54510-W
°06610-W
°07710-W
°09910-W
1x5. 006-398
°54510-W
°06610-W
°07710-W
°09910-W
1x57. 506-198
°54150-W
°06250-W
°07-350-W
°09450-W
1x57. 506-398
°54150-W
°06250-W
°07-350-W
°09450-W
aiD0.1 006-168
°54120-W
°06220-W
°07320-W
°09520-W
aiD0.1 006-368
°54120-W
°06220-W
°07320-W
°09520-W
52.2
aiD5. 006-248
°54900-W
°06010-W
°07110-W
°09310-W
0.5
aiD5. 006-448
°54900-W
°06010-W
°07110-W
°09310-W
1x5. 006-298
°54510-W
°06610-W
°07710-W
°09910-W. 1x5
006-498
°54510-W
°06610-W
°07710-W
°09910-W
1x57. 506-298
°54150-W
°06250-W
°07350-W
°09450-W
1x57. 506-498
°54150-W
°06250-W
°07350-W
°09450-W
aiD0.1 006-268
°54120-W
°06220-W
°07320-W
°09520-W
aiD0.1 006-468 °54120-W
°06220-W
°07330-W
°09520-W
52.2
SWA
seireS
36.x36. 306-298°54401-W
°06501-W
°07601-W
57.x36. 106-298°54401-W
°06501-W
°07601-W
57.x57. 406-298°54401-W
°06501-W
°07601-W
Standard Angle Beam— SWS and AWS Styles, Benchmark Series
Note: Standard wedge angles are specified for carbon steel.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
11
Angle Beam Transducers
Angle Beam Transducers are single or dual element transducers
designed for weld inspection or flaw detection where flaws have
an angular orientation with respect to the material surface.
Weld inspections are performed using shear waves refracted
from a longitudinal wave by means of a lucite wedge. Lucite
wedges are designed to produce shear waves of a particular
angle in a specified material with minimal wedge noise.
MSW-QC Style Angle Beam, Gamma Series
MSW-QC Style are miniature angle beam trans-ducers that
screw directly into our “Quick Change” Lucite wedges. All
MSW-QC transducers have top-mount Microdot connectors.
Gamma series utilize conventional monolithic ceramic
elements and are recommended for regular inspection of
non-attenuative materials.
10.0 MHz MSW-QC
transducers are available
only in Gamma series.
"52.egdeWelbaecalpeR "573.egdeWelbaecalpeR "05.egdeWelbaecalpeR
egdeW
elgnAA B C D E
egdeW
elgnAA B C D E
egdeW
elgnAA B C D E
°54
°06
°07
°09
54.
54.
54.
54.
57.
48.
00.1
59.
73.
44.
05.
05.
14.
14.
14.
14.
74.
74.
74.
74.
°54
°06
°07
°09
55.
55.
55.
55.
98.
40.1
91.1
51.1
74.
55.
85.
16.
65.
65.
65.
65.
05.
05.
05.
05.
°54
°06
°07
°09
07.
07.
07.
07.
50.1
42.1
14.1
93.1
55.
46.
86.
37.
07.
07.
07.
07.
26.
26.
26.
26.
Note: Standard wedge angles are specified for carbon steel.
Miniature Angle Beam Transducers— MSW-QC Style
.qerF)zHM(
eziS).ni(
SEDOCTCUDORP.qerF)zHM(
eziS).ni(
SEDOCTCUDORP
ammaGseireS
dradnatSegdeW
seirosseccAammaGseireS
dradnatSegdeW
seirosseccA
0.1 005. 095-142
°03012-W°54112-W°06212-W°07312-W°09412-W
selbaC
CNB'6210-C
OMEL'6220-C
egdeWtnalpuoC
047-DX
5.3.tnoc 005. 095-342
°03012-W°54112-W°06212-W°07312-W°09412-W
selbaC
CNB'6210-C
OMEL'6220-C
egdeWtnalpuoC
047-DX
5.1
573. 095-132
°03022-W°54122-W°06222-W°07322-W°09422-W
0.5
052. 095-422
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 595-142
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 095-432
°03022-W°54122-W°06222-W°07322-W°09422-W
52.2
052. 095-222
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 095-442
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 095-232
°03022-W°54122-W°06222-W°07322-W°09422-W
01
052. 095-622
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 095-242
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 095-632
°03022-W°54122-W°06222-W°07322-W°09422-W
5.3
052. 095-322
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 095-642
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 095-332
°03022-W°54122-W°06222-W°07322-W°09422-W
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
12
Angle Beam Transducers
Angle Beam Transducers are single or dual element transducers
designed for weld inspection or flaw detection where flaws have
an angular orientation with respect to the material surface.
Weld inspections are performed using shear waves refracted
from a longitudinal wave by means of a lucite wedge. Lucite
wedges are designed to produce shear waves of a particular
angle in a specified material with minimal wedge noise.
Note: Standard wedge angles are specified for carbon steel.
MSW-QC Style Angle Beam, Benchmark and Alpha Series
Benchmark and Alpha series MSW-QC Miniature Angle Beam Transducers are available in
the same range of sizes and fit the same standard “Quick Change" wedges as the Gamma series.
Their one-piece stainless steel case insures long service life. All MSW-QC probes are color coded by
frequency and have top mounted Microdot connectors.
Benchmark series probes feature proprietary BENCHMARK COMPOSITE® active elements. They offer a
superior combination of sensitivity, resolution, and penetration for punching through highly attenuative
materials. They are especially beneficial when signal to noise ratio is a problem, for example coarse
grain materials and fiber reinforced composites. Alpha series MSW-QC probes are made with highly
damped monolithic ceramic elements and are recommended when very short pulse lengths are
required for axial resolution.
.qerF)zHM(
eziS).ni(
SEDOCTCUDORP.qerF)zHM(
eziS).ni(
SEDOCTCUDORP
kramhcneBseireS
ahplAseireS
dradnatSegdeW
seirosseccAkramhcneB
seireSahplAseireS
dradnatSegdeW
seirosseccA
0.1 005. 195-142 195-141
°03012-W°54112-W°06212-W°07312-W°09412-W
selbaC
CNB'6210-C
OMEL'6220-C
egdeWtnalpuoC
047-DX
5.3.tnoc 005. 195-342 195-341
°03012-W°54112-W°06212-W°07312-W°09412-W
selbaC
CNB'6210-C
OMEL'6220-C
egdeWtnalpuoC
047-DX
5.1
573. 695-132 695-131
°03022-W°54122-W°06222-W°07322-W°09422-W
0.5
052. 195-422 195-421
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 695-142 695-141
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 195-432 195-431
°03022-W°54122-W°06222-W°07322-W°09422-W
52.2
052. 195-222 195-221
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 195-442 195-441
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 195-232 195-231
°03022-W°54122-W°06222-W°07322-W°09422-W
5.7
052. 195-522 195-521
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 195-242 195-241
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 195-532 195-531
°03022-W°54122-W°06222-W°07322-W°09422-W
5.3
052. 195-322 195-321
°03002-W°54102-W°06202-W°07302-W°09402-W
005. 195-542 195-541
°03012-W°54112-W°06212-W°07312-W°09412-W
573. 195-332 195-331
°03022-W°54122-W°06222-W°07322-W°09422-W
Miniature Angle Beam Transducers— MSW-QC Style
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
13
Angle Beam Transducers
Angle Beam Transducers are single or dual element
transducers designed for weld inspection or flaw
detection where flaws have an angular orientation
with respect to the material surface. Weld inspections
are performed using shear waves refracted from a
longitudinal wave by means of a lucite wedge. Lucite wedges
are designed to produce shear waves of a particular angle
in a specified material with minimal wedge noise.
"52.egdeWelbaecalpeR "05.egdeWelbaecalpeR
elgnA A B C D E F elgnA A B C D E F
°54 74. 06. 03. 13. 84. 43. °54 37. 69. 24. 65. 37. 05.
°06 74. 56. 53. 13. 84. 43. °06 37. 80.1 05. 65. 37. 05.
°07 74. 07. 83. 13. 84. 43. °07 37. 61.1 45. 65. 37. 05.
°09 74. 09. 83. 13. 84. 43. °09 37. 65.1 85. 65. 37. 05.
MSWS Style Angle Beam
MSWS Angle Beam Transducers are designed to fit
removable lucite wedges. Refracted shear wave angles
may be specified as required. All MSWS transducers
have captive screws for fastening the probe to the wedge
and are fitted with Microdot connectors. High temperature
wedges are for use at temperatures up to 400°F.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
ammaG
seireS
dradnatS
egdew
pmeT-iH
*egdeWseirosseccA
ammaG
seireS
dradnatS
egdeW
pmeT-H
*egdeWseirosseccA
0.1 005. 085-142
°54040-W
°06240-W
°07440-W
°08640-W
°09840-W
°54850-W
°06950-W
°07060-W
selbaC
CNB'6
210-C
OMEL'6
220-C
egdeW
tnalpuoC
047-DX
0.5
052. 085-422
°54820-W
°06030-W
°07230-W
°08430-W
°09630-W
°54550-W
°06650-W
°07750-W
selbaC
CNB'6
210-C
OMEL'6
220-C
egdeW
tnalpuoC
047-DX
52.2
052. 085-222
°54820-W
°06030-W
°07230-W
°08430-W
°09630-W
°54550-W
°06650-W
°07750-W 005. 085-442
°54040-W
°06240-W
°07440-W
°08640-W
°09840-W
°54850-W
°06950-W
°07060-W
005. 085-242
°54040-W
°06240-W
°07440-W
°08640-W
°09840-W
°54850-W
°06950-W
°07060-W
0.01
052. 085-622
°54820-W
°06030-W
°07230-W
°08430-W
°09630-W
°54550-W
°06650-W
°07750-W
5.3
052. 085-322
°54820-W
°06030-W
°07230-W
°08430-W
°09630-W
°54550-W
°06650-W
°07750-W 005. 085-642
°54040-W
°06240-W
°07440-W
°08640-W
°09840-W
°54850-W
°06950-W
°07060-W
005. 085-342
°54040-W
°06240-W
°07440-W
°08640-W
°09840-W
°54850-W
°06950-W
°07060-W
Miniature Angle Beam Transducers— MSWS Style
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
14
snoisnemiDegdeW
elgnA A B C D E F
°54 13. 52. 12. 91. 32. 82.
°06 13. 24. 12. 91. 32. 82.
°07 13. 24. 12. 91. 32. 82.
°09 13. 27. 43. 91. 32. 82.
Angle Beam Transducers
tnemelE
snoisnemiDA B C
781.x781. 23. 07. 75.
52.x52. 05. 0.1 55.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
°54 °06 °07 °09 seirosseccA
52.2781.x781. 046-292 146-292 246-292 346-292
selbaC
CNB'6
210-C
OMEL'6
220-C
052.x052. 026-292 126-292 226-292 326-292
0.5781.x781. 046-492 146-492 246-492 346-492
052.x052. 026-492 126-492 226-492 326-492
01781.x781. 046-692 146-692 246-692 346-692
052.x052. 026-692 126-692 226-692 326-692
Fingertip Potted Angle Beam Transducers— ABFP Style
SMSWS Style Angle Beam
SMSWS Angle Beam Transducers are subminiature transducers designed to
fit removable lucite wedges. Refracted shear wave angles may be specified
as required. All SMSWS transducers have standard screws for fastening the
probe to the wedge and have top-mount miniature Microdot connectors.
Note: Part numbers above are for carbon steel. For aluminum, specify frequency, size,
and refracted angle in aluminum.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
ammaG
seireS
dradnatS
egdeWseirosseccA
52.2 521. 585-212
°54021-W
°06121-W
°07221-W
°09321-WelbaC
CNB'6
740-C
egdeW
tnalpuoC
047-DX
0.5 521. 585-412
°54021-W
°06121-W
°07221-W
°09321-W
0.01 521. 585-612
°54021-W
°06121-W
°07221-W
°09321-W
Subminiature Angle Beam— SMSWS Style
Note: Standard wedge angles are specified for carbon steel.
Angle Beam Transducers are single or dual element transducers
designed for weld inspection or flaw detection where flaws have an
angular orientation with respect to the material surface. Weld
inspections are performed using shear waves refracted from a
longitudinal wave by means of a lucite wedge. Lucite wedges are
designed to produce shear waves of a particular angle in a specified
material with minimal wedge noise.
ABFP Style Angle Beam
ABFP Style, fingertip, fixed angle, shear wave transducers are available in standard angles for
inspecting steel and aluminum. Custom angles for other materials may be special ordered. Their small
size makes them ideal for weld inspection in restricted access areas. All ABFP Transducers are
equipped with right angle Microdot connectors. Top mounted connectors may be special ordered.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
15
Dual Element Transducers
Dual Element Contact Transducers are longitudinal
wave transducers with a split element; one half
functions as a transmitter while the other functions as
a receiver. Each half-element is angled slightly toward
the other forming the “roof” angle. This “roof” angle
effectively focuses the sound beam. These trans-
ducers are excellent for thin range flaw detection and
thickness gauging. Because they have a discrete
transmitter and receiver, better signal to noise ratios
are achieved compared to single element transducers.
ADP, RC, and FDU Style Dual Element
Dual Element Transducers are for general flaw
detection and thickness gauging on materials with
irregular or pitted surfaces. The ADP and RC models
are color coded for quick frequency identification. The
low profile ADP model has a potted BNC cable. The RC
Dual models have a 4-pin LEMO connector which
allows for quick and easy cable replacement. All FDU
models have mini Microdot threaded connectors. All
models may be contoured to fit ID and OD curvatures.
tnemelE
retemaiDA B C
052. 05. 46. 63.
573. 36. 46. 74.
005. 57. 86. 06.
qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
lauDPDA *lauDCR †lauDUDF lauDPDA *lauDCR †lauDUDF
52.2
052. 007-222 186-222 086-222
0.5
052. 007-422 186-422 086-422
573. 007-232 186-232 086-232 573. 007-432 186-432 086-432
005. 007-242 186-242 005. 007-442 186-442
5.3
052. 007-322 186-322 086-322 5.7 573. 007-531
573. 007-332 186-332 086-332
005. 007-342 186-342
tnemelE
retemaiDA B
052. 83. 05.
573. 05. 05.
ADP/RC
Fingertip Dual Element Transducers— ADP/RC/FDU Styles
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
ledoMammaG
seireSseirosseccA
0.5
052. A004TH 067-422
selbaC
CNB'6
201-C:dradnatS
101-C:deromrA
573. V065ABK 032-445
elbaC
CNB'6
760-C
*Duty Cycle: KBA560V— 750°F, maximum contact time is 10 seconds;
HT400A— 1000°F, maximum contact time is 5 seconds; cool to
ambient before reuse.HT400A
KBA560V
High Temperature Transducers*
HT400A and KBA560V Style High
Temperature Dual Element Transducers
HT400A and KBA560V models are
available with replaceable BNC cables and
can be used for both flaw detection
and thickness gauging applications.
Model HT400A can be used
intermittently on materials up to
1000º F. Model KBA560V can
be used intermittently on
materials up to 750ºF.
FDU
* Standard BNC Cable (C-088) or Heavy Duty BNC Cable (C-089) sold separately
† Standard BNC Cable (C-014) sold separately
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
16
Dual Element Transducers
Dual Element Contact Transducers are longitudinal wave transducers
with a split element; one half functions as a transmitter while the
other functions as a receiver. Each half-element is angled slightly
toward the other forming the “roof” angle. This “roof” angle
effectively focuses the sound beam. These transducers are excellent
for thin range flaw detection and thickness gauging. Because they
have a discrete transmitter and receiver, better signal to noise ratios
are achieved compared to single element transducers.
DU Style Dual Element
DU Dual Element Transducers with replaceable
delays are excellent general-purpose probes for
applications with flat or curved surfaces. High
Temperature delays are also available for
inspections at temperatures up to 400°F. All DU
transducers have standard Microdot
connectors for easy replacement.
tnemelE
eziSA B C
005.x005. 57. 58. 87.
00.1x005. 83.1 29. 87.
DU-F Style Dual Element, Benchmark Series
Benchmark series DU-F Style Dual Element Transducers
feature proprietary BENCHMARK COMPOSITE® active
elements. Benchmark series offer a superior
combination of sensitivity, resolution, and
penetration for punching through highly
attenuative materials. They are especially
beneficial when signal to noise ratio is a
problem, for example coarse grain materials
and fiber reinforced composites. Close
tolerance, integral delays assure consistent
performance.
FASTTM Probes for Rapid Manual Weld Inspection
Benchmark series FASTTM Probes are dual, high angle,
longitudinal wave probes with proprietary
BENCHMARK COMPOSITE® elements. They are
primarily for inspection using the FASTTM method
developed by SPIN (LLC). FASTTM high speed,
manual weld scanning can reduce inspection
costs for fabrication shops, field welding
organizations,or any industry that performs in-
service NDE of components. For a detailed
Product Bulletin, contact our sales department.
* Duty Cycle: at 400°F, maximum contact time is 10 seconds; cool to
ambient before reuse.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
ammaG
seireS
yaleD
teS
yaleDTH
*teSseirosseccA
0.15.x5. 057-192 026-SD 027-SD
elbaC
CNB'6
420-C
tnalpuoC
047-DX
1x5. 047-192 046-SD 047-SD
52.25.x5. 057-292 026-SD 027-SD
1x5. 047-292 046-SD 047-SD
0.55.x5. 057-492 026-SD 027-SD
1x5. 047-492 066-SD 067-SD
Standard Dual Element Transducers— DU Style
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
kramhcneB
seireSseirosseccA
52.25.x5. 157-292
elbaC
CNB'6
420-C
1x5. 147-292
0.55.x5. 157-492
1x5. 147-492
DU-F Style— Benchmark
ledoM.qerF
)zHM(
lufesU
htpeD
TCUDORP
SEDOC
1TSAF 0.5 "6.0ot"0 088-610-983
2TSAF 0.5 "5.1ot"0 009-610-983
3TSAF 0.5 "4ot"5.0 087-610-983
FASTTM Probes
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
17
Immersion Transducers
Single Element Immersion Transducers are longitudinal wave
transducers typically used in manual, semi-automatic, and
automatic scanning systems. Scanning parts with irregular or
complex geometries is possible because of the conforming
“water path” layer between the probe and the inspected material.
Superior near-surface resolution can be achieved when compared
to contact transducers. Angle beam inspection is possible by
simply angling the probe or search tube in relation to the part
surface. Spherical (point) or cylindrical (line) focusing can also be
accomplished using acoustically matched lenses. Focal length
must be specified.
tnemelE
retemaiDA B
052. 36. 55.1
573. 36. 55.1
005. 36. 55.1
057. 0.1 77.1
00.1 52.1 28.1
ISS and IS Style Immersion
ISS and IS Immersion Transducers are for general ultrasonic immersion inspections requiring element
diameters between .25″ and 1.0″. Available in Alpha, Gamma, and BENCHMARK COMPOSITE® series,
they can be focused for critical applications to improve near-surface resolution or sensitivity to small
discontinuities. All ISS and IS Transducers have waterproof UHF connectors. Waterproof BNC
connectors may be special
ordered. Gamma Series are
recommended for
applications where high
sensitivity and penetration
are required. Alpha Series
(where available) are
designed for optimum
damping and resolution.
New Benchmark Series
(where available), with
BENCHMARK COMPOSITE®
elements, offer a superior
combination of sensitivity,
resolution, and penetration
for punching through highly
attenuative materials.
* Focus: S = Spherical; C = Cylindrical, N = Non-focus.
Focal length must be specified. For available focal
lengths, see table at the end of the Immersion
Transducers section.Note: Waterproof cables are available in Accessories Section.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
sucoF*ahplA
seireS
ammaG
seireS
kramhcneB
seireSsucoF*
ahplA
seireS
ammaG
seireS
kramhcneB
seireS
0.1
052.
S
C
N
082-122
092-122
003-122
0.5
052.
S
C
N
082-421
092-421
003-421
082-422
092-422
003-422 003-428
573.
S
C
N
082-132
092-132
003-132573.
S
C
N
082-431
092-431
003-431
082-432
092-432
003-432
082-438
092-438
003-438
005.
S
C
N
082-142
092-142
003-142005.
S
C
N
082-441
092-441
003-441
082-442
092-442
003-442
082-448
092-448
003-448
057.
S
C
N
063-152
073-152
083-152057.
S
C
N
063-451
073-451
083-451
063-452
073-452
083-452
063-458
073-458
083-458
00.1
S
C
N
063-162
073-162
083-162
063-168
073-168
083-16800.1
S
C
N
063-461
073-461
083-461
063-462
073-462
083-462
063-468
073-468
083-468
52.2
052.
S
C
N
082-221
092-221
003-221
082-222
092-222
003-222 003-228
01
052.
S
C
N
082-621
092-621
003-621
082-622
092-622
003-622
573.
S
C
N
082-231
092-231
003-231
082-232
092-232
003-232 003-238573.
S
C
N
082-631
092-631
003-631
082-632
092-632
003-632
005.
S
C
N
082-241
092-241
003-241
082-242
092-242
003-242
082-248
092-248
003-248005.
S
C
N
082-641
092-641
003-641
082-642
092-642
003-642
057.
S
C
N
063-251
073-251
083-251
063-252
073-252
083-252
063-258
073-258
083-258057.
S
C
N
063-651
073-651
083-651
063-652
073-652
083-652
00.1
S
C
N
063-261
073-261
083-261
063-262
073-262
083-262
063-268
073-268
083-268
51
052.
S
C
N
082-721
092-721
003-721
5.3
052.
S
C
N
082-321
092-321
003-321
082-322
092-322
003-322 003-328052. S"5.1
203-721
)001-CTT(
573.
S
C
N
082-331
092-331
003-331
082-332
092-332
003-332
082-338
092-338
003-338573.
S
C
N
082-731
092-731
003-731
005.
S
C
N
082-341
092-341
003-341
082-342
092-342
003-342
082-348
092-348
003-348005.
S
C
N
082-741
092-741
003-741
057.
S
C
N
063-351
073-351
083-351
063-352
073-352
083-352
063-358
073-358
083-35852 052.
S
C
N
082-921
092-921
003-921
00.1
S
C
N
063-361
073-361
083-361
063-362
073-362
083-362
063-368
073-368
083-368
Immersion Transducers— ISS and IS Styles
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
18
Immersion Transducers
Single Element Immersion Transducers are longitudinal wave transducers typically used in
manual, semi-automatic, and automatic scanning systems. Scanning parts with irregular or
complex geometries is possible because of the conforming “water path” layer between the probe
and the inspected material. Superior near-surface resolution can be achieved when compared to
contact transducers. Angle beam inspection is possible by simply angling the probe or search
tube in relation to the part surface. Spherical (point) or cylindrical (line) focusing can also be
accomplished using acoustically matched lenses. Focal length must be specified.
IPS Style Immersion
IPS Immersion Transducers with small diameter cases are designed for immersion
applications where transducer size limitations exist. The Alpha series are designed for
maximum bandwidth and resolution capabilities. The Gamma series are for increased sensitivity and
penetration. All IPS Transducers have Microdot connectors.For best results the connector should be
sealed with a non-
water soluble grease.
IR Style Immersion
IR Immersion Transducers are used where
.25″ to .5″ diameter probes are desired,
but where space constraints exist that
prohibit the use of standard ISS Style
transducers. IR Style transducers have a
right angle mounted UHF connector and
will fit into a 1.5 cubic inch area. The IR is
available in both the Alpha and Gamma
series and can be focused for
critical applications to
improve near-surface
resolution or sensitivity
to small discontinuities.
tnemelE
retemaiDA B
521. 83. 54.1
052. 83. 54.1
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
sucoF*ahplA
seireS
ammaG
seireSsucoF*
ahplA
seireS
ammaG
seireS
0.1
052.
N
C
S
024-122
014-122
004-122
5.3
052.
N
C
S
024-321
014-321
004-321
024-322
014-322
004-322
573.
N
C
S
024-132
014-132
004-132
573.
N
C
S
024-331
014-331
004-331
024-332
014-332
004-332
005.
N
C
S
024-142
014-142
004-142
005.
N
C
S
024-341
014-341
004-341
024-342
014-342
004-342
52.2
052.
N
C
S
024-221
014-221
004-221
024-222
014-222
004-222
0.5
052.
N
C
S
024-421
014-421
004-421
024-422
014-422
004-422
573.
N
C
S
024-231
014-231
004-231
024-232
014-232
004-232
573.
N
C
S
024-431
014-431
004-431
024-432
014-432
004-432
005.
N
C
S
024-241
014-241
004-241
024-242
014-242
004-242
005.
N
C
S
024-441
014-441
004-441
024-442
014-442
004-442
tnemelE
retemaiDA B C
,573.,052.
005.57. 49. 57.
Immersion Transducers— IR Style
* Focus: S = Spherical; C = Cylindrical; N = Non-focus. Focal length must be specified.
For available focal lengths, see table at the end of the Immersion Transducers section.
Note: Waterproof cables are available in Accessories Section.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
sucoF*ahplA
seireS
ammaG
seireSseirosseccA sucoF*
ahplA
seireS
ammaG
seiresseirosseccA
0.1 052.
S
C
N
023-122
033-122
043-122
elbaC
CNB'6
210-C
01 052.
S
C
N
023-621
033-621
043-621
023-622
033-622
043-622
elbaC
CNB'6
210-C
52.2 052.
S
C
N
023-221
033-221
043-221
023-222
033-222
043-22251
521.
S
C
N
023-711
033-711
043-711
5.3 052.
S
C
N
023-321
033-321
043-321
023-322
033-322
043-322
052.
S
C
N
023-721
033-721
043-721
0.5 052.
S
C
N
023-421
033-421
043-421
023-422
033-422
043-422
22 521.
S
C
N
023-811
033-811
043-811
52 052.
S
C
N
023-921
033-921
043-921
Immersion Transducers— IPS Style
* Focus: S = Spherical; C = Cylindrical; N = Non-focus. Focal length must be specified. For available focal
lengths, see table at the end of the Immersion Transducers section.
.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP.qerF
)zHM(
eziS
).ni(
SEDOCTCUDORP
sucoF*ahplA
seireS
ammaG
seireSseirosseccA sucoF*
ahplA
seireS
ammaG
seiresseirosseccA
0.1 052.
S
C
N
023-122
033-122
043-122
elbaC
CNB'6
210-C
01 052.
S
C
N
023-621
033-621
043-621
023-622
033-622
043-622
elbaC
CNB'6
210-C
52.2 052.
S
C
N
023-221
033-221
043-221
023-222
033-222
043-22251
521.
S
C
N
023-711
033-711
043-711
5.3 052.
S
C
N
023-321
033-321
043-321
023-322
033-322
043-322
052.
S
C
N
023-721
033-721
043-721
0.5 052.
S
C
N
023-421
033-421
043-421
023-422
033-422
043-422
22 521.
S
C
N
023-811
033-811
043-811
52 052.
S
C
N
023-921
033-921
043-921
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
19
Immersion Transducers
Single Element Immersion Transducers are longitudinal wave
transducers typically used in manual, semi-automatic, and
automatic scanning systems. Scanning parts with irregular or
complex geometries is possible because of the conforming “water
path” layer between the probe and the inspected material.
Superior near-surface resolution can be achieved when compared
to contact transducers. Angle beam inspection is possible by
simply angling the probe or search tube in relation to the part
surface. Spherical or cylindrical focusing can also be accomplished
using acoustically matched lenses. Focal length must be specified.
Velocity System Immersion Transducers
These transducers are specifically designed for use with through
transmission Krautkramer Velocity Systems. These transducers
are available in either the ISS Style or IR Style housing and are
provided with standard waterproof UHF connectors.
Velocity System Immersion
Transducers ISS/IR Styles
ISS
IR
Immersion Transducer Focal Lengths
N = (Dia.)2 × (Freq.)
4 × Velocity
The following table lists the near field lengths
and minimum and maximum practical focal
lengths in water expressed in inches. To find
the approximate near field length in steel,
divide all N values by 4.
ycneuqerF
)zHM(
)sehcnI(retemaiDtnemelE
0.1 57. 05. 573. 52. 521.
0.1
N
niM
xaM
3.4
0.2
0.3
4.2
5.1
0.2
1.1
0.1
0.1
52.2
N
niM
xaM
6.9
0.2
0.6
4.5
5.1
0.4
4.2
0.1
0.2
4.1
8.
8.
6.
5.
5.
5.3
N
niM
xaM
0.51
0.2
0.8
4.8
5.1
0.6
7.3
0.1
5.2
1.2
8.
5.
9.
5.
5.
0.5
N
niM
xaM
0.12
0.2
0.8
0.21
5.1
0.8
4.5
0.1
0.4
0.3
8.
0.2
3.1
5.
8.
3.
3.
3.
0.01
N
niM
xaM
0.42
5.1
0.8
7.01
0.1
0.6
0.6
8.
5.4
7.2
5.
5.1
7.
3.
3.
0.51
N
niM
xaM
0.61
0.1
0.6
0.9
8.
0.6
0.4
5.
0.2
0.1
3.
5.
0.52
N
niM
xaM
7.6
5.
0.2
7.1
3.
0.1
.qerF
)zHM(
SEDOCTCUDORP
elytS
SSI
elytS
RI
0.5 103-441 124-441
N = Near field practical focal length.
Min = Minimum practical focal length.
Max = Maximum practical focal length.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
20
Single Element TransducersFor Use With Precision Thickness Gauges
Precision thickness gauging transducers are
single element, delay line and contact
transducers designed primarily for use with
Krautkramer precision thickness gauges.
They may also be used with most standard flaw
detection instruments. A wide variety is available
to satisfy virtually any inspection requirement on
most metals and nonmetals with relatively
smooth, parallel front and back surfaces.
Depending on probe selection and material
conditions, most precision gauges can measure
from 0.005 to 15.00 inches in steel and plastic.
snoitacificepSrecudsnarTelbitapmoCLD3LCdna3LC
ledoM epyTrecudsnarT tcatnoCretemaiD
lanimoNycneuqerF
egnaRgnirusaeM)detonsselnuleets(
edoCtcudorP
RFD2ahplA dradnatS,yaleDgnisuoH
.ni03.0mm6.7
zHM51 .ni0.1ot010.0mm52ot52.0
066-725-311
,A2ahplARFDiniM
llamS,yaleDgnisuoH
.ni91.0mm8.4
zHM02 .ni002.0ot010.0mm5ot52.0
556-815-311
A112AC ,tcatnoCdradnatS
.ni57.0mm1.91
zHM5 .ni0.51ot080.0mm183ot2
000-445-311
512AC ,tcatnoCdradnatS
.ni05.0mm7.21
zHM5 .ni0.2ot080.0mm15ot2
110-421-311
F2ahplA ,tcatnoCpitegniF
.ni83.0mm7.9
zHM01 .ni0.01ot08.0mm452ot2
000-625-311
P-RFDahplA yaleD,scitsalPeniL
.ni03.0mm6.7
zHM22 .ni051.0ot500.0mm8.3ot31.0
ylnoscitsalP
166-811-311
omeLelgnathgirottodorciM(elbac406--505-220aesunoitcennocrecudsnartdnatnemurtsniroF)rotcennocomeLthgiartsottodorciM(529-405-220aro,)rotcennoc
snoitacificepSrecudsnarTelbitapmoC403LCdna003LC
ledoM epyTrecudsnarT retemaiDtcatnoC lanimoNycneuqerF
leets(egnaRgnirusaeM)detonsselnu
edoCtcudorP
RFD2ahplA dradnatS,yaleDgnisuoH
.ni03.0mm6.7
zHM51 .ni0.1ot700.0mm52ot52.0
066-725-311
,A2ahplARFDiniM
llamS,yaleDgnisuoH
.ni91.0mm8.4
zHM02 .ni002.0ot500.0mm5ot31
556-815-311
A112AC ,tcatnoCdradnatS
.ni57.0mm1.91
zHM5 .ni0.51ot060.0mm183ot5.1
000-445-311
F2ahplA ,tcatnoCpitegniF
.ni83.0mm7.9
zHM01 .ni0.01ot060.0mm452ot5.1
000-625-311
521ABK ,scitsalPtcatnoC
.ni81.0mm6.4
zHM02 numinim.ni010.0muminimmm52.0
ylnoscitsalP
600-815-311
403LCneP-KylnO
elytSlicnePrecudsnarT
.ni090.ro560.mm3.2ro7.1
zHM02 noitacilppanotnednepeDlaiceps403LCderiuqerdna
gnittessunem
092-030-983
)CNBottodorciM(elbac210-041-811aesunoitcennocrecudsnarttotnemurtsniroF
CA211
Alpha DFR-P
Alpha 2F
KPen
KBA125
Alpha 2DFR
Mini DFR
CA215
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
21
Standard probes are readily available to satisfy a wide range of remaining wall thickness applica-
tions including: high-temperature, through-coating, erosion/corrosion, thin materials, areas of
limited access, tough-to-penetrate materials (coarse-grained/nonmetals), external pitting, wear-
resistance, boiler tubing, small diameter piping and tubing, and general-purpose applications.
DIALOG Intelligent Probes are automatically recognized by the DM4 Family of instruments for quick
setup, best performance, and test documentation. The model FH2E-D-REM contains a built-in
membrane switch with no additional cable lines to send and store readings in the DM4 DL’s on-
board data logger at a press of the index finger of the probe hand.
Dual Element D-Meter ProbesCompatible with the D-Meter line of ultrasonic thickness gauges.
A B
CDE
F
G
HI
JK
L
M
N
O
P
Q
lebaL ledoM noitangiseD elbaCeborP retemaiDtcatnoC
gnirusaeM
egnaR
leetSni
egnaRpmeT edoCtcudorP
.A E2HF pitregniF dettoP "083. "0.2-"030. F°031< 500-255-311
.B **D-E2HF pitregniF dettoP "083. "0.2-"030. F°031< 700-255-311
.C **MER-D-E2HF dneSetomeR dettoP "083. "0.2-"030. F°031< 900-255-311
.D *HF055BK pitregniF dettoP "573. "0.2-"060. F°031< 100-055-311
.E 213AD slairetaMnihT 235ABK "003. "0.1-"520. F°031< 609-650-380
.F 525ABK tnirptooFmm5 dettoP "002. "0.1-"520. F°031< 200-615-311
.G *61B213AD tnirptooFmm3 dettoP "021. "05.-"520. F°031< 439-660-380
.H 065ABK esopruPlareneG 135ABK "526. "0.8-"060. F°054< 012-445-311
.I **D-065ABK esopruPlareneG 135ABK "526. "0.8-"060. F°052< 409-650-380
.J 103AD esopruPlareneG 335ABK "574. "0.8-"050. F°041< 509-650-380
.K 303AD noitarteneP 335ABK "536. .nim"002. F°041< 401-165-311
.L 401-PD noitartenePhgiH 235ABK "52.1 .nim"002. F°031< 600-255-311
.M RW-E2HF tnatsiseRraeW dettoP "055. "0.2-"030. F°031< 212-445-311
.N RW-065ABK tnatsiseRraeW 135ABK "007. "0.8-"060. F°054< 500-255-311
.O **RW-D-E2HF tnatsiseRraeW dettoP "055. "0.2-"030. F°031< 800-255-311
.P004TH
A004THerutarepmeThgiH
535ABK
635ABK"005. "0.01-"040. F°0001<
067-425-311
067-422-311
.Q *HTB055BKrelioBdeddutS
ebuTHTB-C "573. "0.2-"060. F°031< 300-055-311
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
22
Applications and Special Probes Lab
The Krautkramer Applications Lab has a long history of providing a broad spectrum of services to our
customers. Experienced Application Engineers and Specialists will work closely with the customer to provide
technical assistance and custom designed products to solve challenging ultrasonic testing applications.
Applications Support Group
This group specializes in the evaluation of customer supplied samples to provide practical
recommendations and solutions for ultrasonic testing problems. Typical applications include thickness and
velocity measurements, flaw detection and evaluation and material characterization. This group also
provides applications support for small, integrated ultrasonic testing systems. The Applications Lab is fully
equipped with a large selection of ultrasonic instrumentation to aid in providing total testing solutions.
Special Probes Group
The Special Probes Group designs and manufactures custom transducers for specific ultrasonic
testing applications. This may include the modification of transducer case design, element size and
shape or the connector type and location. The customer may require transducers with custom
electrical and acoustic performance including non-standard frequencies, resolution, sensitivity,
bandwidth or focusing. Special test fixtures, custom wedges, delay lines and cables are also designed
and built to meet customer specifications.
Examples of Special Probe Types
• I.D. and O.D. Bore Probes • Special Focused Probes • Advanced Flaw Sizing Probes
• Special Paintbrush Probes • High Temperature Probes • Radiation Resistant Probes
• Coarse Grain Inspection Probes • Multiple Transducer Probes • Industrial Linear, Phased,
and Annular Arrays
For further assistance from the Applications Lab, please copy and complete the customer inquiry form on
the next page and fax it to (717)-242-4170— make extra copies for additional inquiries. You can also phone
the Applications Lab at (717)-242-0327 or visit Krautkramer on the Internet at www.krautkramer.com
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
23
Phased Array TransducersPrinciples of Phased Array Transducers
By sequentially firing the individual elements of an array transducer at slightly different times,
the ultrasonic wavefront can be focused or steered in a specific direction.
Additionally, electronically phasing the order and sequential firing speeds of an array allows for
“sweeping” or “panning” through a selection of beam angles or across an area of inspection
without manually manipulating the transducer.
Linear Phased Array Curved Phased Array
Key Features
• Electronic focal length adjustments
• Electronic linear scanning
• Electronic beam steering / angulation
Key Benefits
• Reduced manual manipulation
• Reduced scanning surface contact area
necessary (footprint)
• Reduced need for multiple inspections with
specifically angled or focused probes
• Increased inspection speed and efficiency
• Increased coverage of inspection area
General Specifications
Frequency
1 MHz to 7.5 MHz (10 MHz in some cases)
Piezoelectric material
Proprietary BENCHMARK COMPOSITE®
Number of elements
16–256 elements (application dependent)
Pitch
0.2mm minimum
Bandwidth (-6dB)
60% - 80% typical
Crosstalk
> 30dB
Element sensitivity variation
± 2dB
Cable options
Detachable connector or potted cable
Phased Array Steering Phased Array Focusing
Annular Phased Array
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
24
Applications Lab – Customer Inquiry Form
*Please complete this form and fax it to the Krautkramer Applications Lab at (717)-242-4170
Name: _______________________________ Title: ____________________ Date: _________________
Company Name: __________________________________________________ Phone: ________________
Address: ________________________________________________________ City: __________________
State: _____________ ZIP: ____________ Fax: ______________________ E-mail: ________________
Brief Description of the Ultrasonic Application:
Material Type: _____________________ Dimensions: _________________ Shape: ________________
Test Method: Contact r Immersion r Scan Method: Manual r Mechanical r In-Line r
Current Ultrasonic Instrument: _____________________________________
Test Objective:
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
Special Concerns: Restricted Access r Temperature r Radiation r Surface Condition r
Flaw Type(s): __________________________ Size: _________________ Location: ______________
Please include a sketch of the test part
I am interested in Special Transducers for this application:
Type: Single Element r Dual Element r Array r Frequency: ________________ MHz
Element Size: ____________ Damping: Alpha(High) r Gamma (Low) r Connector: ____________
Focus: Flat r Spherical (Spot) r Cylindrical (Line) r Focal Distance: ______________
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
25
Cables
Krautkramer offers a complete selection of transducer cables and
adaptors with the most commonly used connections. Cables are
designed with reinforced connector-cable junctions for long
service life. Custom transducer cables and adaptors are
available upon request. Call or write for price and delivery.
noitpircseDhtgneL
)teef(
elbaC
epyTSEDOCTCUDORP
DMMotCNB
DMotCNB
DMotCNB
DMotFHU
0.6
0.6
0.21
0.6
871GR
471GR
471GR
471GR
740-C
210-C
110-C
030-C
DMotOMEL
DMelgnAthgiRotCNB
CNBotCNB
0.6
0.6
0.6
471GR
471GR
85GR
220-C
330-C
610-C
CNBotCNB
CNBotFHU
CNBotOMEL
0.21
0.6
0.6
85GR
85GR
85GR
120-C
720-C
810-C
)foorpretaw-non(FHUotFHU
)foorpretaw-non(FHUotFHU
)foorpretaw-non(FHUotOMEL
0.6
0.21
0.6
85GR
85GR
85GR
020-C
520-C
530-C
FHUfoorpretaWotCNB
FHUfoorpretaWotFHU
DMMotCNBlauD
0.6
0.6
0.6
8128nedleB
8128nedleB
9093-052DM
310-C
920-C
410-C
DMotCNBlauD
DMotFHUlauD
0.6
0.6
471GR
471GR
420-C
430-C
CNBotlauDCR
ytuDyvaeH,CNBotlauDCR
0.6
0.6
471GR
471GR
880-C
980-C
lauDCNBotV065ABX
deromrA,lauDCNBotA004TH
dradnatS,lauDCNBotA004TH
0.6
0.6
0.6
471GR
471GR
471GR
760-C
101-C
201-C
epyT noitpircseD SEDOCTCUDORP
FHU-CNBCNBhtiwtnemurtsnirorecudsnartstpadA
rotcennocFHUhtiwelbacotrotcennoc520-A
CNB-FHUFHUhtiwtnemurtsnirorecudsnartstpadA
rotcennocCNBhtiwelbacotrotcennoc620-A
CNB-OMEL1#OMELhtiwtnemurtsnistpadA
tnemurtsnitaelbacCNBotrotcennoc030-A
AR-FHUTS"¾,FHUTSepytrofrotpadaelgnathgiR
ebuthcraesretemaid230-A
FITS-FHUotrotcennocFHUhtiwrecudsnartstpadA
ebuthcraesepytegnalf"573.1130-A
CNB-MDeborpretem-DnogulpOMELstpadA
srotcennocCNBlaudotelbac540-A
CNB-CNB elbacCNBrehtonaotelbacCNBselpuoC 010-A
Special cables available on request.
Adaptors
Special adaptors available on request.
Search Tubes
The STUHF stainless steel
immersion search tube has an
outside diameter of .735″ and is for
use with all immersion transducers
with UHF (threaded) connectors.
htgneL
).ni(
TCUDORP
SEDOC
htgneL
).ni(
TCUDORP
SEDOC
5.1 010-TS 0.21 610-TS
0.2 110-TS 0.81 810-TS
0.3 210-TS 0.42 510-TS
5.4 310-TS 0.63 910-TS
0.6 410-TS
Special lengths available on request.
Accessories
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
26
Exosen Couplants
(General Purpose)
Krautkramer Exosen ultrasonic couplant is
specially formulated for ultrasonic coupling
in all general applications. Exosin is
available in five standard viscosities and
has the following properties:
Accessories
ytitnauQ EDOCTCUDORP
ebut).zo5.3(.g001 174-ZX
ytitnauQ EDOCTCUDORP
elttobezeeuqsecnuo2 047-DX
ytitnauQ SEDOCTCUDORP
ebutecnuo2 010-HX
sebutecnuo2nezoD 510-HX
ytitnauQ SEDOCTCUDORP
elttobezeeuqsecnuo8 028-LX
elttobezeeuqsecnuo61 048-LX
reniatnocnollag1 068-LX
reniatnocnollag5 088-LX
XL Couplant
(Laboratory and Smooth Surfaces)
Krautkramer XL ultrasonic couplant is specifically
made for laboratory testing of transducers and for
contact testing of materials having smooth
surface finish of 62 microinches RMS or better in
both general production and laboratory testing.
SLC Couplant
(Curved, Rough, Vertical,
and Overhead Surfaces)
Krautkramer SLC couplant is a thick highly
attenuative couplant ideal for making thickness
measurements on very rough surfaces that would
not be possible with thinner couplants. Its high
viscosity also makes it an excellent couplant for
use on vertical and overhead surfaces.
Hitempco Couplant
(High Temperature)
Krautkramer Hitempco is an excellent high
temperature couplant for inspection on surfaces
at temperatures up to 550°F. Its high viscosity
(toothpaste consistency) makes it ideal on
vertical and overhead surfaces.
Delay Line, Wedge and Protective
Face Couplant
This couplant is for use between the face of the
transducer and the delay line, wedge,
membrane, or wear cap with which it is used.
ZGM Couplant
(High Temperature)
ZGM is a highly viscous, high temperature
couplant manufactured by Krautkramer. It is
designed for use on surfaces with temperatures
of 400°F (minimum) to 1000°F. Primarily intended
for wall thickness measurement, ZGM contains a
solid filler that melts at high temperature.
Note: MSDS included with each Exosen shipment. Letter of
certification available upon request. Empty 8 ounce squeeze
bottle included with each gallon of Exosen.
ytitnauQ EDOCTCUDORP
reniatnocecnuo4 080-X
Note: Letter of certification included with each
Hitempo shipment.
Note: All couplant, Exosen or XL, shipped in
nonreturnable polyethylene containers. Average
gross weight per 55 gallon drum is 410 pounds.
Not intended for human consumption.
• Water soluble.
• Low sulphur and halogens.
• Non-toxic and nonflammable.
• Antiseptic— non-irritating— pleasantly scented— safe.
• High viscosity grades ideal for vertical and
overhead surfaces.
• Rust preventative added.
• Shelf life of one year when stored between
50°F and 80°F and out of direct sunlight.
Please order by product code from the table.
tnalpuoC
edarG
tnelaviuqE
ytisocsiV*nollag1
foesaC
ruoF
*nollag1
nollag5 nollag55
01nesoxE lIO03 022-X 522-X 042-X 062-X
41nesoxE liO04 023-X 523-X 043-X 063-X
02nesoxE liO09 024-X 524-X 044-X 064-X
03nesoxEyvaeH
elbaruoP025-X 525-X 045-X 065-X
04nesoxE dilosimeS — — 046-X 066-X
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
27
Accessories
Test Blocks
Type DC Block (AWS type)For shear wave distance calibration.
Contains a 1.0″ radius overlaying a 2.0″radius on 180° half circle.
Dimensions:
2.0″ radius section is .50″ thick;
1.0″ radius section is 1.0″ thick.
Product Code: 118-540-290.
Type SC Block (AWS type)For shear wave sensitivity calibration.
Contains two .062″ diameter sidedrilled
holes. Distance from front surface to
center of holes is .178″ and .521″.Dimensions: 3.000″ x 1.250″ x .905″.
Product Code: 118-540-330
AWS Resolution Block
For checking resolution capabilities of
angle beam transducers. Contains three
sets of three .062″ diameter thru holes
for 45°, 60°, and 70°.
Dimensions: 6″ x 3″ x 1″Product Code: 118-540-350
Angle Beam Block (Miniature Size)Substitute for DSC Block for general angle
beam calibration. Contains 1.0″ radius
opposite a 2.0″ radius, and a 5/64″ side-
drilled, flat bottom hole .750″ deep
Dimensions: 1.0″ thick.
Product Code: 118-540-260
IOW Beam Profile Block
(English or Metric)For beam profile measurement of angle
beam transducers and for measure-
ment of transducer angles.
Dimensions: 12″ x 3″ x 2″Product Code: 118-540-240
Type DSC Block (AWS type)For shear wave distance and sensitivity
calibration. Contains a 1.0″ radius
opposite a 3.0″ radius. The 3.0″ radius
includes a radius slot .375″ deep x
.032″ wide. Also contains 0″ reference
point for checking exit point on wedge,
and a .125″ diameter side-drilled thru hole
and corresponding markings at 45°, 60°, and 70°
for measuring actual refracted angle.
Dimensions: 1.0″ thick
Product Code: 118-540-300.
Step BlocksFor Thickness and linearity calibration.
Available in 4-step version with
thickness of .250″, .500″, .750″,
and 1.00″;or 5-step version, with
thickness of .100″, .200″, .300″,
.400″, and .500″.
4-Step Product Code: 118-540-320.
5-Step Product Code: 118-540-310.
Type DS Block (AWS type)For longitudinal distance and sensitivity
calibration. Contains a 2.0″ high section
between two 4.0″ high sections.
Dimensions: 6.0″ x 4.0″ x 2.0″ .
Product Code: 118-540-340.
IIW Block Type 1For calibration of shear and
longitudinal transducers, and
for verification of shear wedge
exit point and refracted angle.
Also can be used to check
resolution and sensitivity.
Dimensions: 12″ x 4″ x 1″ .
Product Code: 118-540-270.
IIW Block Type 2Modified version of original
IIW Type 1. Includes a 2.0″radius x .250″ deep cut-out
and additional side-drilled
holes for resolution studies.
Dimensions: 12″ x 4″ x 1″ .
Product Code: 118-540-280.
NAVSHIPS Test BlockUsed in accordance with
NAVSHIPS Specification 0900-
006-3010. Section 6, for
distance amplitude correction,
sensitivity levels and flaw depth
information. Contains six 3/64″diameter side-drilled holes at
distances from ¼″ to 2 ¾″ .
Dimensions: 12″ x 3″ x 1 ¼″Product Code: 118-540-370
30FBH Resolution BlockFor determining resolution and
sensitivity capabilities and to
produce area/amplitude plots for
normal beam transducers.
Contains ten flat bottom holes
each of diameters 3/64″, 5/64″, and8/64″ at test metal distances from
.050″ to 1250″Dimensions: 11″ x 1 ½″ .
Product Code: 118-540-230.
ASME-625 Reference PlateFor longitudinal, shear, and surface wave
sensitivity calibrations.
Contains six flat bottom holes:
three 4/64″ diameter holes, one
each at a depth of .050″, .250″,
and .50″, and one 4/64″ hole
1.500″ deep, one 8/64″ hole
1.625″ deep, and one 16/64″hole 1.750″ deep.
Dimensions: 12″ x 6″ x ½″ .
Product Code: 118-540-360.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
28
Accessories
Miniature Resolution BlockFor checking resolution capabilities and
calibrating high resolution test equipment.
Contains four 3/16″ wide and 5/8″ long, milled
slots to simulate flat plate reflectors at metal
travel distances of .015″ , .020″ , .025″ , and
.030″ , and six flat bottom holes, three each
with diameters of 3/64″ and 1/64″ at metal travel
distances of .020″ , .025″ , and .030″ .
Dimensions: 3 5/8″ x 1 x 1/8″ .
Product Code: 118-540-250.
Test Blocks, continued
ASTM Area/Amplitude Block Set(8 Blocks) Includes the following blocks:
1-0300, 2-0300, 3-0300, 4-0300, 5-0300,
6-0300, 7-0300, and 8-0300.
Product Code: 118-540-018.
ASTM Distance/Amplitude Block Set(19 Blocks) All 19 blocks have the same size
test hole. Hole size must be specified when
ordering (3/64″ , 5/64″ , or 8/64″ ). The metal travel
distances, for the set are: 0006, 0012, 0025,
0037, 0050, 0062, 0075, 0087, 0100, 0125,
0175, 0225, 0275, 0325, 0425, 0475, 0525,
and 0575.
Product Code: 118-540-028.
ASTM Distance/ Area Amplitude Set(10 Blocks) Includes the following blocks:
3-0300, 5-0012, 5-0025, 5-0050, 5-0075,
5-0150, 5-0300, 5-0600, 8-0300, and 8-0600.
Product Code: 118-540-019.
noitpircseD SEDOCTCUDORP
dnaemanremotsucgnicnereferecnailpmocfoetacifitreC.1
,skcolbfonoitpircsed,rebmunredroesahcrupremotsuc,sserdda
decnerefertahtseifitreC.srebmunlaireskcolbdna,lairetam
elbacilppahtiwecnadroccaniderutcafunamerewskcolb
elbaecarttnempiuqegnirusaemhtiwdekcehcdnasnoitacificeps
.sdradnatSfouaeruBlanoitaNehtot
619-CB
)1(nidetsilsaecnailpmocfoetacifitrec,ylnoskcolBMTSAroF.2
.decnereferskcolbllaroftolpedutilpmA/ecnatsiDsulpevoba719-CB
lairetamgnitsilsisylanadnaecnailpmocfoetacifitreC.3
dna,ezisniarg,ssendrah,rebmuntaeh,edarg,noitacificeps
.evoba)1(nidetsilnoitacifitrecllasedulcnI.sisylanalacimehc
redrOlaicepS
Single ASTM BlocksFor measuring the sensitivity and/or resolution of
normal beam transducers. Machined to E-127-64
dimension requirements. Available with flat bottom
holes from 1/64″ to 8/64″ diameter, with test metal
distances from .062″ to 6.00″ . Prices for other
lengths and diameters furnished on request. Block
identification is as follows: first digit indicates hole
diameter in 64ths, next four digits indicate test
metal distance in hundredths of an inch. Therefore,
a 3-0050 block would have a 3/64″ diameter FBH at
.500″ TMD. Special Order.
Notes: (Apply to all test blocks)
1. Product codes listed are for steel test blocks only. Please order all steel blocks by product code listed for each type.
All other block materials should be ordered on an individual basis by description.
2. Please see price list for ordering and delivery information.
3. Krautkramer’s test blocks are machined to engineering specifications and to precision tolerances from ultrasonically
inspected and approved material.
4. All blocks and sets listed include quality hardware cases except single ASTM blocks.
5. Steel blocks are nickel plated unless otherwise requested.
6. Special test blocks quoted on request based on specifications, type of material, and whether material is supplied
by Krautkramer or customer.
7. For details on test block certification, see table above.
ASME Calibration BlocksProvided with one flat bottom hole with
diameter and depth per specifications.
Special Order.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
29
Transducer Certification
noitpircseDTCUDORP
SEDOC
murtcepSycneuqerFdnamrofevaWemiTlaeR
teehSnoitaciffitreC119-CT
Y:shtpedeerhtta,saeraYdnaX,eliforPmaeB0,
Y½0
Y½1,0
319-CT
leets0434rofyficeps,evruCedutilpmAecnatsiD
munimularo419-CT
Transducer Certification
Beam Profile
The beam profile plot is made by moving the
transducer across a small rod reflector in an
immersion tank. Ball or wire reflectors are also
commonly used. The beam profile gives the
relative intensity and width of the sound beam at
a given distance from the transducer face.
Distance Amplitude Curve
The distance amplitude curve shows the effect
of the near field (Fresnel Zone) as well as the
exponential decay of the far field.
Real Time Waveform and Frequency Spectrum
The real time waveform and frequency spectrum
certifies the natural, unbiased, unfiltered waveform
and the degree of damping and shows the frequency
components of the gated signal. A highly damped unit
such as an Alpha Series transducer gives optimum
resolution while displaying a broad frequency
spectrum. This is necessary for thickness gauging of
thin materials or when inspecting for near-surface
flaws. A transducer that is not as highly damped will
have greater penetrating power but less resolution
and a narrower frequency spectrum.
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
30
Bd oitaR Bd oitaR Bd oitaR Bd oitaR
0 1:00.1 5 1:87.1 11 1:55.3 71 1:807
5. 1:60.1 6 1:00.2 21 1:89.3 81 1:49.7
1 1:21.1 7 1:42.2 31 1:74.4 91 1:19.8
2 1:62.1 8 1:15.2 41 1:10.5 02 1:00.01
3 1:14.1 9 1:28.2 51 1:26.5 04 1:00.001
4 1:85.1 01 1:61.3 61 1:13.6 06 1:00.0001
Tables and Formulas
Near Field Length (N)
in Water (Inches)
ycneuqerF
)zHM(
)sehcni(retemaiDtnemelE
00.1 57. 05. 52.
0.1 3.4 4.2 70.1 72.
52.2 6.9 4.5 4.2 06.
0.5 4.12 0.21 4.5 3.1
0.01 34 42 7.01 7.2
.4ybseulavevobaehtedivid,leetsnihtgnel.xorppaehtdnifoT
Velocity and Acoustic Impedance of Common Materials
Useful Formulas
dB vs. Amplitude
Ratio Chart
yeKlobmyS
λ htgnelevaW=
retemaiDeborP=D
ycneuqerFeborP=F
yticoleVcitsuocA=C
ytisneD=d
α elgnAtnedicnI=
β elgnAdetcarfeR=
ssenkcihTtraP=T
htaPdnuoS=.P.S
dleiFraeN=N
γ elgna-½ecnegreviD=
=htgneLdleiFraeN D2 DroC4/F 2 4/ λ
daerpSmaeB NIS γ FD/C= × D/l22.1ro22.1
waLs'llenS NIS α C=bNIS/1
C/2
=ecnatsiDpikS T2 × NAT β
=htaP-V T2 × SOC β
ecnatsiDecafruS
=)detcejorP(.P.S × NIS β
1(htpeD ts =)geL .P.S × SOC β
2(htpeD dn =)geL .P.S(–T2 × SOC β)
3(htpeD dr =)geL .P.S( × SOC β T2–)
=htgnelevaW F/C=l
=ycneuqerF l/C=F
=ecnadepmIcitsuocA C=Z × d
dnuoSdetcelfeRfo%
=erusserPZ(=pR
2Z–
1Z(/)
2Z+
1)
fotneiciffeoC
=noissimsnarTZ2=pT
2Z(/
2Z+
1)
=htdiWmaeBlatoTNAT2()N–htpeD(=WBT γ +)
T × retemaiDtnemelE
:emiTtisnarT C/T2=TT
=ycneuqerFretneC Fc
F(=1
F+2
2/)
=htdiwdnaB% F(=WB%2
F–1
F/)c
× %001
=rotcaFQ Fc
F(/2
F–1)
afoecnerefmucriC
=elcriC×π retemaiD
=ecnatsiD deepS × emit
=MPR ecnerefmucriC/deepS
gninacSmumixaM
)y,x(deepS)WBE+htgneLwalF.niM( × RRP
gninnacSmumixaM
)ralop(deepSMPR × retemaiD × )nimreptf(lavretnIkcolC
=ecnereffiDBd A(goL021
A/2)
=oitaRBd 02/BdgolvnI
=tnelaviuqEretaW
)leets(
)retaw(F=EW × ))leets(C(/))retaw(C(
)htgneLlacoF=F(
XAM β = NIS 1– )DO/DI(
=htgneLlacoF n/)1–n(F=R
tesffOrednilyC
euqinhceTsuidaRedistuO=)X(tesffO × NIS α
lairetaM
lanidutignoL
yticoleV
raehS
yticoleV
citsuocA
ecnadepmI
riA 310. 33. — — 4000.
munimulA 52. 3.6 21. 1.3 0.71
edixOanimulA 93. 9.9 32. 8.5 0.23
muillyreB 15. 9.21 53. 9.8 0.32
edibraCnoroB 34. 0.11 — — 4.62
ssarB 71. 3.4 80. 0.2 7.63
muimdaC 11. 8.2 950. 5.1 0.42
reppoC 81. 7.4 980. 3.2 6.14
)nworc(ssalG 12. 3.5 21. 0.3 9.81
nirecylG 570. 9.1 — — 24.2
dloG 31. 2.3 740. 2.1 6.26
ecI 61. 0.4 80. 0.2 5.3
lenocnI 22. 7.5 21. 0.3 2.74
norI 32. 9.5 31. 2.3 4.54
)tsac(norI 81. 6.4 01. 6.2 2.33
daeL 580. 2.2 30. 7. 6.42
muisengaM 32. 8.5 21. 0.3 0.01
yrucreM 750. 4.1 — — 6.91
munedbyloM 52. 3.6 31. 4.3 2.46
lenoM 12. 4.5 11. 7.2 6.74
enerpoeN 360. 6.1 — — 1.2
610sec.
in.!
cm.
sec. 105!
gm
cm sec. 102
5!
610sec.
in.!
510sec.
cm.!
lairetaM
lanidutignoL
yticoleV
raehS
yticoleV
citsuocA
ecnadepmI
lekciN 22. 6.5 21. 0.3 5.94
6-6,nolyN 01. 6.2 340. 1.1 9.2
)03EAS(liO 760. 7.1 — — 5.1
munitalP 31. 3.3 760. 7.1 8.96
ssalgixelP 11. 7.2 340. 1.1 1.3
enelyhteyloP 70. 9.1 20. 5. 7.1
enerytsyloP 390. 4.2 40. 1.1 5.2
enahteruyloP 070. 9.1 — — 9.1
ztrauQ 32. 8.5 780. 2.2 2.51
lytuB,rebbuR 70. 8.1 — — 0.2
revliS 41. 6.3 60. 6.1 0.83
dlim,leetS 32. 9.5 31. 2.3 0.64
sselniats,leetS 32. 8.5 21. 1.3 4.54
nolfeT 60. 4.1 — — 0.3
niT 31. 3.3 70. 7.1 2.42
muinatiT 42. 1.6 21. 1.3 3.72
netsgnuT 02. 2.5 11. 9.2 0.101
muinarU 31. 4.3 80. 0.2 0.36
retaW 4850. 84.1 — — 84.1
cniZ 71. 2.4 90. 4.2 6.92
610sec.
in.!
cm.
sec. 105!
gm
cm sec. 102
5!
610sec.
in.!
cm.
sec. 105!
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
31
Basic Contact Kit— Product Code 118-450-020Contains a wide assortment for weld inspection, lamination detection, corrosion/erosion and thin guage materials.
Transducer Kits
Transducer Kits combine the most popular transducers and accessories necessary for general ultra-
sonic testing applications. Discount priced and organized in a hard shell carrying case, the kit contents
are easily accessible, convenient for storage, and economical.
Basic AWS Weld Inspection KitPart No. 118-450-500Contains transducers and accessories required
for testing weldments to specification AWS D1.1.
.ytQ SEDOCTCUDORP noitpircseD
1 306-292-311,elytSSWA"36x"36.,zHM52.2
eborPmaeBelgnAtnemelEelgniS
1 106-292-311,elytSSWA57x"36.,zHM52.2
eborPmaeBelgnAtnemelEelgniS
1 406-292-311,elytSSWA"57.x"57.,zHM52.2
eborPmaeBelgnAtnemelEelgniS
1 340-262-311,PHR-RC.aid"1,zHM52.2
eborPtcatnoCevaW-L
1 401-W **egdeWeticuL°54
1 501-W **egdeWeticuL°06
1 601-W **egdeWeticuL°07
1 610-C elbaClaixaoCCNB-CNB
1 691-B dradnatSecnerefeRCSD
1 028-LX tnalpuoC.zo8
1 020-008-811 esaCgniyrraCllehsdraH
.ytQ SEDOCTCUDORP noitpircseD
1 000-445-311,elytSA112AC.aid"5.,zHM5
eborPtcatnoCtnemelEelgniS
1 340-262-311,elytSRC.aid"1,zHM52.2
eborPtcatnoCtnemelEelgniS
1 066-725-311,elytSRFD2ahplA"52.,zHM51
eborPeniLyaleD
1 007-422-311,elytSPDA.aid"52.,zHM5
eborPtnemelElauD
1 195-442-311,elytSCQ-WSM.aid"5.zHM5
kramhcneB eborPmaeBelgnA
2 112-W **egdeWeticuL°54
2 212-W **egdeWeticuL°06
2 312-W **egdeWeticuL°07
2 610-C elbaClaixaoCCNB-CNB
2 210-C elbaClaixaoCDM-CNB
1 891-045-811dradnatSecnerefeRpetS5
"5.–"1.
1 028-LX tnalpuoC.zo8
1 020-008-811 esaCgniyrraCllehsdraH
Multi-Purpose Contact KitPart No. 118-450-510Contains the most commonly used transducers
for a variety of angle beam, lamination,
corroson, general flaw, and thickness testing.
Basic Angle Beam KitPart No. 118-450-030Contains an assortment for weld and other
angle beam inspections.
.ytQ SEDOCTCUDORP noitpircseD
1 246-492-311,elytSPFBA"81.x"81.,zHM5
eborPmaeBelgnAtnemelEelgniS
1 585-612-311,elytSSWSMS"521.,zHM01
eborPmaeBelgnAtnemelEelgniS
1 006-492-311,elytSSWS"1x"5.,zHM5
eborPmaeBelgnAtnemelEelgniS
1 195-422-311kramhcneB,elytSCQWSM"52.,zHM5
eborPmaeBelgnAtnemelEelgniS
1 691-045-811 dradnatSecnerefeRCSD
1 740-C elbaClaixaoCDMM-CNB
1 610-C elbaClaixaoCCNB-CNB
1 210-C elbaClaixaoCDM-CNB
.ae1 221,021-W **egdeWeticuL°07dna°54
.ae1 710,510-W **egdeWeticuL°07dna°54
.ae1 302,202,102-W **egdeWeticuL°07dna,°06,°54
1 028-LX tnalpuoC.zo8
1 020-008-811 esaCgniyrraCllehsdraH
.ytQ SEDOCTCUDORP noitpircseD
1 067-422-311,elytSA004TH.aid"52.,zHM5
)xamF°0001(tnemelElauD
1 072-242-311,elytSSCCWP.aid"5.,zHM52.2
eniLyaleDtnemelEelgniS
1 006-292-311,elytSSWS"1x"5.,zHM52.2
maeBelgnAtnemelEelgniS
.ae1 680,070-WegdeWerutarepmeThgiH°06dna°54
).xamF°004(
1 050-KP2roftiKeniLyaleDerutarepmeThgiH
).xamF°004(072-24
1 610-C elbaClaixaoCCNB-CNB
1 760-C elbaCCNB-DMlauD
1 201-C elbaCeborPA004/004TH-CNB
2 010-HXtnalpuoCOCPMETIHebuT.zo2
)F°055ottneibma(
1 174-ZXtnalpuoCMGZebuT.zo5.3
)F°0001–004(
1 891-045-811 "5.–"1.dradnatSecnerefeRpetS5
1 020-008-811 esaCgniyrraCllehsdraH
High Temperature KitPart No. 118-450-530Contains dual element delay line, and angle
beam transducersfor flaw detection at
elevated temperatures to 1000°F.
Basic Immersion KitPart No. 118-450-040Contains an assortment of spherically focused
transducers which exhibit good resolution and
sensitivity and are ideal for determining which
type of transducers are best suited for the
testing situation.
.ytQ SEDOCTCUDORP noitpircseD
1 203-721-311htiweborPelytSSSI"52.,zHM51
sucoFlacirehpS"5.1
1 082-631-311"3htiweborPelytSSSI"83.,zHM01
sucoFlacirehpS
1 063-452-311"6htiweborPelytSSI"57.,zHM5
sucoFlacirehpS
1 082-442-311"2htiweborPelytSSSI"5.,zHM5
sucoFlacirehpS
1 700-065-811 retpadAlaixaoCdetalosIFHU-ARFHU
1 610-C elbaClaixaoCCNB-CNB
1 520-A retpadAFHU-CNB
1 020-008-811 esaCgniyrraCllehsdraH
Corrosion Survey KitPart NO. 118-450-520Contains the most popular dual element
flaw detection transducers for corrosion
detection in materials from ambient to 1000°F.
.ytQ SEDOCTCUDORP noitpircseD
1 007-422-311,elytSPDA.aid"52.,zHM5
eborPtnemelElauD
1 012-445-311,elytS065ABK.aid"573.,zHM5
).xamF°054(eborPtnemelElauD
1 067-422-311 elytSA004TH-ABK.aid"52.,zHM5
1 157-292-311,elytSF-UD"5.x"5.,zHM52.2
eborPtnemelElauD
1 142-442-311,elytSRCMP.aid"5.,zHM5
eborPenarbmeMtnemelEelgniS
1 760-C elbaClaixaoC065BAK-CNB
1 610-C elbaClaixaoCCNB-CNB
1 420-C elbaClaixaoCDM-CNB
1 201-C elbaCeborPA004/004TH-CNB
2 010-HXtnalpuoCOCPMETIHebuT.zo2
)F°055ottneibma(
1 174-ZXtnalpuoCMGZebuT.zo5.3
)F°001–004(
1 891-045-811 "5.–"1.dradnatSecnerefeRpetS5
1 047-DXenarbmeMdnaeniLyaleD/egdeW
tnalpuoC
1 020-008-811 esaCgniyrraCllehsdraH
** Refracted angle in carbon steel @ 70°F.
.ytQ EDOCTCUDORP S noitpircseD
1 306-292-311,elytSSWA"36x"36.,zHM52.2
eborPmaeBelgnAtnemelEelgniS
1 195-242-311CMB,elytSCQ-WSM"5.,zHM52.2
eborPmaeBelgnAtnemelEelgniS
1 340-262-311,elytSRC"1,zHM52.2
eborPtcatnoCtnemelEelgniS
1 000-445-311,elytSA112AC5.,zHM5
eborPtcatnoCtnemelEelgniS
1 142-252-311,elytSRCMP"57.,zHM52.2
eborPenarbmeMtnemelEelgniS
.ytQ EDOCTCUDORP S noitpircseD
1 066-725-311elytSRFD2AHPLA"52.,zHM51
eborPeniLyaleDtnemelEelgniS
1 157-292-311,elytSF-UD"5.x"5.,zhM52.2
eborPtcatnoCtnemelElauD
1 186-422-311,elytSCR"52.,zHM5
eborPtcatnoCtnemelElauD
1 210-C elbaClaixaoCDM-CNB
1 610-C elbaClaixaoCCNB-CNB
1 420-C elbaClaixaoClauDDM-CNB
1 880-C elbaClaixaoClauDCR-CNB
.ytQ SEDOCTCUDORP noitpircseD
1 050-D ).scp01(066-725-311rofseniLyaleD
1 120-MP142-352-311rofenarbmeMevitcetorP
).scp21(
.ae1 601,401-W **egdeWeticuL°07dna°54
.ae1 312,212,112-W **egdeWeticuL°07dna,°06,°54
1 047-DX tnalpuoCeniLyaleD/egdeW
1 891-045-811 "5.–"1.dradnatSecnerefeRpetS5
1 020-008-811 esaCgniyrraCllehsdraH
Your Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]
Benchmark Composite ProbesPunch through toughest materials...superior pene-
tration, very high signal to noise ratio
Phased Array ProbesDramatically reduce inspection time and cost...
scan, focus and change the beam electronically.
Change test setup in seconds. One array replaces
many conventional probes.
Application Specific ProbesOptimize test results with custom design probes/
accessories. We welcome new applications and
custom design requirements. Experienced staff
specializes in practical, cost effective solutions.
Now Available on CD!
Krautkramer's New Probe Selection Guide and
Information Library
The CD includes a
searchable UT probe
data base and selection
guide, latest ultrasonic
probe catalog, extensive
applications and technical
reference libraries, litera-
ture on new products and
full range of products.
Request your CD online at AgfaNDT.com
and visit our interactive probe database and
selection guide while you're there.
Over 4000 standard and special transducersare available for virtually every ultrasonic testing application!
Ultrasonic Systems
Visit AgfaNDT.com for more information on Krautkramer’s Ultrasonic Transducers and tolearn more about Agfa NDT’s complete line of ultrasonic, X-ray, digital and film systemsAgfaNDT.comAgfa NDT Inc.50 Industrial Park RoadLewistown, PA 17044USATel : (717)242-0327Fax : 717/242-2606E-mail: [email protected]
Agfa NDT GmbHRobert-Bosch-Str 3D–50354 Huerth (Efferen)GermanyTel : +49-2233-6010Fax : +49-2233-601402E-mail: [email protected]
Agfa NDT Ltd.892 Charter AvenueCanleyCoventry, West Midlands CV4 8AFUnited KingdomTel : +44 0845 601 5771Fax : +44 0845 130 5775E-mail: [email protected]
Agfa NDT SA68, Chemin des OrmeauxF–69760, LimonestFranceTel : +33-472-179220Fax : +33-478-475698E-mail: [email protected]
ProbeCat/11023k
Printed In USAYour Complete Source for Testing Equipment. Since 1969!
www.BergEng.com Berg Engineering & Sales Company, Inc.
Tel: 847-577-3980 [email protected]