Ultrasonic Thickness: Productivity gains come from the simple things
-
Upload
john-duenzl -
Category
Engineering
-
view
126 -
download
4
Transcript of Ultrasonic Thickness: Productivity gains come from the simple things
![Page 1: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/1.jpg)
Case Study: UltraMATE. How 1 client improved inspection time by 50% and reporting time by more..Created by: John Duenzl
![Page 2: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/2.jpg)
Issue: I send two technicians to site. One to inspect and one to hold the drawings and find the right location on top of recording the data. How can I reduce the time it takes to record the UT thickness readings and not have to re-enter the data in-to our reports
Solution: UltraMATE Prepare for you inspections in advance with the UltraMATE software. Input the job/ calibration/ component data to digitally recall the location and enter the new readings on the device.
Also compare previous thickness readings to make on site decisions as required.
![Page 3: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/3.jpg)
UT Thickness - Simple readings from Spot or Linear readings
- Simplest, sequential numbers 1,2,3…9999
![Page 4: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/4.jpg)
UT Thickness - Grid
- Letters or numbers to identify columns & rows
![Page 5: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/5.jpg)
UT Thickness - Custom Point
- Name both Location & Points at each location
![Page 6: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/6.jpg)
UT Thickness - Custom Linear
- Locations: Coil #- 4 Data points per location
![Page 7: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/7.jpg)
UT Thickness - Custom Grid
- Choose the name for each of a number of separate grid locations.- In this example the current location is “North”
![Page 8: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/8.jpg)
UT Thickness - Boiler File
- Rows are named with Alpha Text- At each elevation/Tube location: multiple readings- Readings are labelled either L,C,R,B
- Left, Centre, Right, Back
![Page 9: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/9.jpg)
UT Thickness - Custom 3D & 4D
For use in designing a survey - Example: Wall
- Total of 6 (Top, Bottom, North, South, East, West)- Second level : the elevation on each wall- Third level: section at each level- Fourth level: test point at each section
![Page 10: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/10.jpg)
UT Thickness - Custom 3D & 4D
For use in designing a survey - Example: Wall
- Total of 6 (Top, Bottom, North, South, East, West)- Second level : the elevation on each wall- Third level: section at each level- Fourth level: test point at each section
![Page 11: Ultrasonic Thickness: Productivity gains come from the simple things](https://reader036.fdocuments.us/reader036/viewer/2022062903/589e5f591a28ab16348b61af/html5/thumbnails/11.jpg)
UT Thickness data available from a DMS GO+ (USM GO+)Want to learn more?
Visit: www.NVMS.com.au to find out when our next online training session is.