ultrasonic motors

17
Seminar on Seminar on ULTRASONIC MOTORS ULTRASONIC MOTORS By By K.S.S.Srinivasa Varma K.S.S.Srinivasa Varma (07L31A0234) (07L31A0234) IV /IV B.Tech , IV /IV B.Tech , Department of Electrical and Electronics Department of Electrical and Electronics Engineering, Engineering, Vignan’s Institute Of Information Technology, Vignan’s Institute Of Information Technology, Duvvada, Visakhapatnam. Duvvada, Visakhapatnam.

Transcript of ultrasonic motors

Page 1: ultrasonic motors

Seminar onSeminar on

ULTRASONIC MOTORSULTRASONIC MOTORSByBy

K.S.S.Srinivasa Varma K.S.S.Srinivasa Varma (07L31A0234)(07L31A0234)

IV /IV B.Tech ,IV /IV B.Tech ,

Department of Electrical and Electronics Engineering,Department of Electrical and Electronics Engineering,

Vignan’s Institute Of Information Technology,Vignan’s Institute Of Information Technology,

Duvvada, Visakhapatnam.Duvvada, Visakhapatnam.

Page 2: ultrasonic motors

ContentsContents

• Introduction• Working of USM• Principle of operation• Mechanism• Types of USM• Applications• Conclusion

Page 3: ultrasonic motors

INTRODUCTIONINTRODUCTION

• An Ultrasonic motor is a type of electric motor formed from the ultrasonic vibration of a component, the stator being placed against another, the rotor depending on the scheme of operation.

• These motors offer high torque density at low speed, high holding torque, simple construction and have a quick response.

Page 4: ultrasonic motors

• To obtain the levels of torque speed characteristics of USM using conventional motors we require to add a gear system to reduce the speed.

• USM’s are fundamentally designed to have high holding force,providing zero backlash.

• These characteristics of USM makes them attractive for robotic applications where small motions are required.

Page 5: ultrasonic motors

ULTRASONIC MOTORULTRASONIC MOTOR

Page 6: ultrasonic motors

WORKING OF USMWORKING OF USM• A travelling wave is established over the

stator surface,which behaves as an elastic ring and produces elliptical motion at the inter face with the rotor.

• This elliptical motion of the contact surface propels the rotor and the drive shaft connected to it.

• The teeth which are attached to the stator are intended to increase the moment arm to amplify the speed.

Page 8: ultrasonic motors

Principle of operationPrinciple of operation

• The general principle of operation of the ultrasonic motors is to generate gross mechanical motion through the amplification and repetition of micro deformations of the active material.

• The active material, induces an orbital motion of the stator of the stator at the rotor contact points to produce macro motion of the stator.

Page 9: ultrasonic motors

• The active material which is a peizo electric material excites a traveling flexural wave within the stator that leads to the elliptical motion of the stator.

• Teeth are used to enhance the speed that is associated with the propelling effect of these particles.

• The frictional force between the stator and rotor causes the rotor to spin.

Page 10: ultrasonic motors
Page 11: ultrasonic motors

MechanismMechanism• Dry friction is often used in contact and the

the ultra sonic vibration induced in the stator is used both to impart motion to the rotor and to modulate the frictional force present at the interface.

• An exceptionally high torque ‘hybrid transducer’ ultrasonic motor uses circumferentially poled and axially poled piezoelectric elements to combine axial and torsional vibration.

Page 12: ultrasonic motors

TYPES OF USM

• Bi-directional linear standing wave USM

• Rotary Ultrasonic Motor

• Spherical ultrasonic motor

Page 13: ultrasonic motors

ApplicationsApplications

• Canon was one of the pioneers of the ultrasonic motors and made it famous for the manufacture of the autofocus lenses.

• USM’s are also used in watch motors and compact paper handling,in spacecraft instruments and subsystems.

Page 14: ultrasonic motors

ULTRASONIC MOTORS IN ROBOTICSULTRASONIC MOTORS IN ROBOTICS

Page 15: ultrasonic motors

ConclusionConclusion

• Hence the ultrasonic motors, which is a new step in the miniaturized electrical technology has got many applications in small appliances because of its high torque at low density.

Page 16: ultrasonic motors

QUERIES?

Page 17: ultrasonic motors

THANK U THANK U