Ultra IP Gateway - Satcom Services
2
www.satcom-services.com Ultra IP Gateway STANDARD FEATURES: Physical Interfaces - LAN: 2 x 10/100Base-T Standard WAN protocols: HDLC (Cisco®-compatible) PPP and Frame Relay Static and Dynamic IP routing (RIP v 1 & 2) DHCP Server Network Address Translation Packet Filtering (Firewall) Quality of Service support to Level 3 Command line interface (Industry Standard) SNMP v.1 & v.3, MIB II Built in Diagnostic Tools HSSI – Up to 52Mbps EIA - 530 up to 20Mbps RS422 Synchronous Overhead Channel The Ultra IP Gateway for Advantech AMT 7X series of modems is a powerful interface card, which replaces our standard EIA-530 and HSSI interface card. It offers the RS530 and HSSI interfaces along with a 2-port 10/100BaseT Ethernet router. It enables Advantech AMT modems to be connected directly to local area networks without the need for expensive stand- alone routers. The heart of the Ultra IP Gateway is the extremely flexible Communication Processor, which provides a wide range of routing and traffic control services between the interfaces. The interface card can route up to 92Mbps of bi- directional Ethernet data, and in TDM multiplex can include the RS530 and HSSI data in the same satellite stream. This allows the use of the full 140Mbps capability of the AMT-7X modems in a single data transmission stream. . The provision of the standard features and availability of the unique capabilities like NAT in the unidirectional links, IP policy control provide a variety of communication solutions. Provision of multiple networking services like DHCP, RIP, NAT/PAT and AAA makes integration into existing networks with different topologies mach more easier. Quality of Service (QoS) features ensure that control and priority is available on the IP and Frame Relay (FR) traffic. The FR function has a Local Management Interface complying with ITU-T Q.933/Annex A and ANSI T1.617 /Annex D; Multi-protocol Encapsulation (RFC 1490: IP over FR), Frame Relay Switching and Frame Relay Fragmentation: FRF12 (UNI, End to End). To assist in integration into networks numerous standard built in diagnostic tools are provided. The card can also be used in a demodulator only high-speed IP receiver.
Transcript of Ultra IP Gateway - Satcom Services
www.satcom-services.com
Ultra IP Gateway
STANDARD FEATURES: Physical Interfaces - LAN: 2 x 10/100Base-T Standard WAN protocols: HDLC (Cisco®-compatible)
PPP and Frame Relay Static and Dynamic IP routing (RIP v 1 & 2) DHCP Server Network Address Translation Packet Filtering (Firewall) Quality of Service support to Level 3 Command line interface (Industry Standard) SNMP v.1 & v.3, MIB II Built in Diagnostic Tools HSSI – Up to 52Mbps EIA - 530 up to 20Mbps RS422 Synchronous Overhead Channel
The Ultra IP Gateway for Advantech AMT 7X series of modems is a powerful interface card, which replaces our standard EIA-530 and HSSI interface card. It offers the RS530 and HSSI interfaces along with a 2-port 10/100BaseT Ethernet router. It enables Advantech AMT modems to be connected directly to local area networks without the need for expensive stand-alone routers. The heart of the Ultra IP Gateway is the extremely flexible Communication Processor, which provides a wide range of routing and traffic control services between the interfaces. The interface card can route up to 92Mbps of bi-directional Ethernet data, and in TDM multiplex can include the RS530 and HSSI data in the same satellite stream. This allows the use of the full 140Mbps capability of the AMT-7X modems in a single data transmission stream. .
The provision of the standard features and availability of the unique capabilities like NAT in the unidirectional links, IP policy control provide a variety of communication solutions. Provision of multiple networking services like DHCP, RIP, NAT/PAT and AAA makes integration into existing networks with different topologies mach more easier. Quality of Service (QoS) features ensure that control and priority is available on the IP and Frame Relay (FR) traffic. The FR function has a Local Management Interface complying with ITU-T Q.933/Annex A and ANSI T1.617 /Annex D; Multi-protocol Encapsulation (RFC 1490: IP over FR), Frame Relay Switching and Frame Relay Fragmentation: FRF12 (UNI, End to End). To assist in integration into networks numerous standard built in diagnostic tools are provided. The card can also be used in a demodulator only high-speed IP receiver.
An ISO9001: 2000 Company Issue 1 January 2006
.
.
.
.
.
.
.
SATCOM SERVICESMike Termondt25 Creek Lane Oak View, CA 93022 Tel.: (805) 649-1284 Fax: (805) 500-4328 Email: [email protected]
Features Physical Interfaces: 2 x LAN: 10/100Base-T RJ45 (IP Data & Card Control) RS530: 25 Way Sub-miniature Female D-Type Overhead RS422 Sync High-density Male 15Way D-Type HSSI: 50 pin SCSI-2 connector (F) for HSSI Data Data Links:
WAN – HDLC (Cisco compatible), PPP, Frame Relay LAN IEEE802.3 10BaseT, IEEE802.3u 100Base-Tx LAN MAC Filtering TCP/IP Stack: Routing: Static Routing Dynamic Routing RIP v1 & 2 Packet Filtering (Firewall) Static Switching IP Aliases Support Proxy ARP UDP Broadcast Forwarding (DHCP, DNS,BOOTP) QoS Level 3: FIFO Queue (FIFOQ) Priority Queuing (PTIQ) Class Based Queuing (CBQ) Hierarchical Fair Service Curve (HFSC) Random Early Detection (RED) Weighted Fair Queue (WFQ) Configurable IP Policy: ICMP Policy Routing Policy Switching Policy TCP Policy UDP Policy Services: DHCP Server DNS Client FTP/TFTP Client AAA (Authentication, Authorisation & Accounting) Local AAA (Access Rights Table) PAP, CHAP, MS-CHAP (Client/Server Authentication) RADIUS, TACACS+ (Client, Remote server authentication)
Features Frame Relay Stack: Frame Relay PVC Local Management Interface ITU-T Q.933/Annex A ANSI T1.617/Annex D LMI or Disabled Address Translation (NAT/PAT) QoS Priority; CIR, Bc, Be Interface Types: UNI – User UNI – Network NNI Multi-Protocol Encapsulation: RFC 1490: IP over FR Cisco: IP over FR Frame Relay Switching Frame Relay Fragmentation: FRF12 (UNI, End to End) Management Interfaces: Terminal Configuration Ports: RS-232 Console Telnet Console Terminal Configuration Interface: Command Line Interface (Industry Standard) Script Support Running and Start-up Configuration Saving
and Recovery SNMP Agent: v.1, & v.3, MIB II Built-in Diagnostic: Ping, Traceroute, Discovery Protocol IP, TCP, UDP, ICMP Protocol Statistics Interface Statistics
Ultra IP Gateway
Joyce Taddeo
Satcom Services
