Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A...

26
i Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before using, please read this User Manual.

Transcript of Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A...

Page 1: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

i

Ultra HD IP Camera

DL-3AB0M10-A

Operation Guide

Dear users, because the native feature set is more

professional. Before using, please read this User

Manual.

Page 2: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

ii

This manual may describe some of the technical details Inaccurately or typographical errors

exised, if you follow the instruction manual when can not solve the problem in the course, please

call our technical department for relevant operational methods. The contents of this manual will

be updated from time to time, without notice.

Name Quantity

Ultra HD IP Camera 1

Parts and kits 1

《Operation Guide》 1

Companion CD 1

Certification and warranty card Each one

Installation Environment

away from high temperature environments; avoid direct sunlight;

To ensure proper cooling of the camera, should avoid the place of poorly ventilated, pay

attention to water, moisture, lightning. To install the outdoors, you need to place a waterproof box

where the camera is fixed;

The machine should be installed horizontally or wall mounted, to avoid in severe vibration of

the place, do not put the other devices on the machine.

To avoid electric shock and misfire

Remember that do not touch the power and the camera with wet hands;

Do not spill liquid on the camera, to avoid causing a short circuit or fire inside the machine;

Do not put other equipment placed directly on the upper of the camera;

Non-professionals do not disassemble the cabinet, to avoid damage and electrical shock;

transportation and handling

The packaging machine is by seismic design and experiments, during transport to ensure that

the camera will not be accidentally damaged, so during transportation of the machine, it is best to

use the original packing material and carton;

Avoid moving camera in subcooled overheated spaces, to avoid condensation inside the

machine and to affect the life of the machine;

Move this machine is Prohibited , otherwise it will damage the motherboard;

Cautions

Packing List

Statement

Page 3: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

iii

Content 1 Product Introduction ............................................................................................................ 1

1.1 Product Introduction .................................................................................................... 1

1.2 Introduction ................................................................................................................. 1

1.3 Technical Specifications .............................................................................................. 2

2 Appearance and Description ................................................................................................... 4

3 equipment and installation ...................................................................................................... 5

3.1 Operating Environment ............................................................................................... 5

3.2 Equipment Installation ................................................................................................ 5

4 IE client .................................................................................................................................. 9

4.1 Preparations ................................................................................................................. 9

4.2 Began to visit ............................................................................................................... 9

4.3 Introduction ............................................................................................................... 10

4.3.1 Real-time monitoring ..................................................................................... 10

4.3.2 Replay ............................................................................................................. 11

4.3.3 Parameter settings ........................................................................................... 13

4.3.3.1 Basic Information Set .......................................................................... 13

4.3.3.2 Network parameters ............................................................................ 15

5. Frequent Asked Questions ................................................................................................... 18

5.1 Fail to Access the IP Camera through the Browser ................................................... 18

5.2 Can Not Play Video after Program Updating ............................................................ 18

5.3 Fail to Browse Images Normally in Windows98 ...................................................... 18

5.4 Can Not Get Data Passed Through Switch ................................................................ 18

5.5 Errors Occur After Updating ..................................................................................... 19

6. Appendix ............................................................................................................................. 20

Appendix A question about the IP Camera port occupancy (map) Explanation ............. 20

Appendix B factory default parameters ........................................................................... 20

7. Explanation of Terms........................................................................................................... 22

Page 4: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

1 /23

1 Product Introduction

1.1 Product Introduction

Thank you for using our products, we will provide you with the best service.

Ultra HD IP Camera DL-3CA0M16-AR uses megapixels CMOS,support Ultra HD

resolution 2048(H)×1536(V),fully meet the application requirements of high-definition images;

Highly integrated SOC processor,low power consumption, super-stable; H.264/MJPEG

compression,Ensure image quality and effectively reducing network bandwidth consumption;

Powerful network function, Support RTSP, VLC Stream Media protocol, Support video FTP

uploading, alarm E-mail sending, support mobile phone remote monitoring; Support WIFI

wireless network search, access, support WEP / WPA / WPA2 wireless encryption, the safe use

more secure; Support POE power supply, engineering deploy more simple and convenient;

Support SD card front-end storage, providing a more convenient way and more reliable protection

for video storage.

1.2 Introduction

◎ 1/3 "progressive scan CMOS

◎ maximum resolution up to 3.1M, 2048 * 1536 @ 20 fps, dual-stream

◎ support wide dynamic function, up to 100dB

◎ IR distance up to 50 meters, the third generation of dot-matrix using infrared, low power

consumption, long life

◎ support image A.FLK, heart protection

◎ Support local video loop out, easy installation;

◎ Support ONVIF network video interconnection standard protocols, perfectly compatible with a

variety of platforms;

Page 5: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

2 /23

1.3 Technical Specifications

Sensor

model DL-3AB0M10-A

Sensor Type 1/3 "3.1 megapixel progressive scan

CMOS

Maximum Image Size 2048(H)×1536(V)

Minimum Illumination Color 0.6 lux@ F1.6

B/W 0.08 lux @ F1.6

Shutter Speed 1/30 sec to 1/4000 sec

WDR Up to 100dB

White Balance Auto / Manual

HSBLC Support

SNR 50DB

Lens

Lens Interface Type CS

Aperture Standard: Automatic

Lens Type Manual zoom, standard f: 2.8mm-12mm

Audio and video

Video Compression H.264 / MJPEG

Resolution Main

2048*1536@20fps; 1920*1080@30fps;

1280*720@30 fps

Secondary 704*576@ 25fps , 352*288@25fps

Video bit rate 1M ~ 12Mbps, CBR / VBR adjustable

OSD

Can be set to display video channel

name, time, date

You can set the display position

Privacy Mask 4 areas

Image Settings Supports mirroring and flipping

Automatic image adjustment function AEC, AWB, AGC

Image adjustment Color saturation, brightness, contrast,

sharpness

Other

Digital image stabilization,

anti-flickering image, motion detection,

video shelter, I / O status alarm

Audio Compression Voice: G.711; Talkback: G.722

Two-way Audio Support

Network

DDNS Support

Video settings

Can be set to automatic recording and

manual recording (motion alarm

recording, sensor alarm recording, timer

recording)

Page 6: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

3 /23

Alarm Output Email, Ftp Upload

Network protocol

TCP/IP、HTTP、DHCP、DNS、DDNS、

FTP、NTP、PPPOE、RTSP、UDP、

UPNP、SMTP、RTP

Remote upgrade Support

Large Platform Support large platform access

Remote View

Computer Internet Explorer (6.0+), Chrome,

Firefox, Safari

User

Account 5

Interface

TF card memory

TF card supports video storage and

image capture, SD2.0 standard,

maximum capacity of 32G

Video output 1 BNC

Alarm In/ Out 1 channel alarm input, 1 channel alarm

output

Audio Interface

1 channel 3.5mm microphone input

(level: 1.0vp-p impedance: 10kΩ)

1 channel 3.5mm headphone output

(Level: 1.0vp-p Impedance: 32Ω or

16Ω)

Network Interface(Lan) RJ45 10M/100M

RS485 interface

1 RS485(Can be used for PTZ control

or transparent transmission)

1 RS232

General specifications

Housing for the environment Aluminum alloy, suitable for indoor

Installation Ceiling mounted, wall mounted

Degree of protection Without

Work environment (temperature and humidity) -10 °C ~ 60 °C / 0% -95% RH

Powered by DC12V / 1A (optional POE)

Power Less than 8W

Size 133(L)*65(W)*63(H)

Weight 0.5kg

Page 7: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

4 /23

2 Appearance and Description

Interface Pictures:

1. Video Output 9.TF card slot

2.3G antennainterface 10. Audio Input

3.SIM card slot 11. Reset button

4. Ethernet port 12.3G Indicator

5. Power Interface 13. The alarm I / O, RS485, RS232

6. Indicator 14.WIFI antenna interface

7. DIP switch 15.WIFI Indicato

8. Audio output

Restore the factory settings, as follows:

Step 1 Cut off the power of IP device, all the indicate lamps are off.

Step 2 Press the “RST” button with a pin, don’t release.

Step 3 Connect the power to the IP Device, the “STATE” indicate lamp will flicker. Hold

on another 30 seconds.

Step 4 Release the pin. Now, you can access the IP device now. Reset successfully

Page 8: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

5 /23

3 equipment and installation

3.1 Operating Environment

Operating system: Windows2000server/ professional/ XP

Network protocol: TCP/IP

Client PC: P4/ 128MRAM/ 40GHD/ Support scaling graphics card, support DirectX8.0

above

3.2 Equipment Installation

1. Connected to the network

1) The network camera is connected into your network or use crossover network cable to

connect directly to a PC.

2) DC12V power supply is turned on.

3) Network connection under normal circumstances, within 5 seconds the connected lamp

(orange) at the network interface lights up, the data indicator (green) flashes, then the

camera's physical network connection is completed.

Page 9: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

6 /23

2. Fitting

1) Iris

2) Bracket

Page 10: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

7 /23

3) Power adapter

Input voltage

Input power frequency

Output voltage

Output Current

Output Power

Operating temperature

Operating Humidity

Weight 200g

Power adapter(UMD-123A)Picture: Outline drawing:

Parameter:

100-240VAC

50~60Hz

DC12.0-12.8V

3000mA

36W

≤90%

3. Installation

1) Installation of the lens: Remove the protective cover on the camera, the lens Aimed at the

installation interface of the camera lens, clockwise lens will be firmly installed, and then insert

the plug of the lens cable to the camera side of the aperture on the interface automatically.

Page 11: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

8 /23

2) Fix bracket: Install the camera bracket fixed to the wall, as shown. If the cement ceiling, metope

should be installed expansion screws firstly(expansion screw mounting holes need the same with

the bracket), then the mounting bracket; If it is woodiness metope, it can use self-tapping screw

mounting bracket directly.

3) Install cameras: use screws to fix the camera to the bracket, and adjust the orientation of the

camera to the need monitor screen, then tighten the bracket fastening screw, fixed camera, as

shown.

Lens installation process, please do not remove the lens protective cover, in order to make sure the

lens is clean, not grinding, good camera installation is complete, the lines of cloth to remove the

protective cover and debug image.

4) debug image: connect the camera video output interface and debugging monitor, by comparing

the images of the monitor, adjust the zoom screw to choose the appropriate field, and then adjust

the focus screw until we get a clear image, finally lock the zoom, focus on adjusting screw, as

shown. If monitoring scenarios exist error, it can loosen bracket adjust screw, through the vertical

and horizontal adjustment screw to adjust monitor images.

Cautions

Page 12: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

9 /23

4 IE client

4.1 Preparations

The default IP address of IP device is 192.168.1.19. Default Subnet Mask is 255.255.255.0.

May modify the IP address of the network camera, such as the network camera modified to

address 192.168.1.194;To access the IP device, the IP address of the PC should match the address

below. Such as:192.168.1.171。

test whether the network camera starts normally. Under WINDOWS system in accordance

with <Start → run → command>operation to open a command line window, type Ping

192.168.1.19 in the command line window, if not display "Request time out", the show starts

normally;

When using a browser (Internet Explore) to access the network camera for the first time, you

must temporarily reduce the security settings to install ActiveX components to the network at one

time, select “Tools” - “Internet Options”- “Security”- “Custom level”- “ActiveX

controls and plug-ins”,enable the “Download signed ActiveX controls”, click “OK” and restart

the web browser.

4.2 Began to visit

1) Enter the default IP address of the IP device on Browser: http://192.168.1.19, Login page

appears as shown below:

2) Carefully read the web page prompts, if you need to install the controls, click the "click

here" button, then follow the prompts to complete the installation of the controls

successfully;

3) If you use IE browser versions below 6.0, please upgrade your browser to version 6.0 or

later;

4) Enter Username: 888888 (factory default administrator user) or 1 (normal user);

5) Enter password: 888888 (factory default administrator password) or 1 (user password)

Page 13: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

10 /23

6) Click [OK] button to enter the network camera preview screen. As shown below:

4.3 Introduction

4.3.1 Real-time monitoring

[Network Mode]: TCP and Multicast, can choose according to your needs.

[View Real-time Video]: Click the button , the preview window will play real-time

video of all channels; Click the button, the preview window real - time video play of all channels;

[Stop Watching The Video]:Click the button , the preview window will stop play

the real-time video of all channels;

[Audio]: Click the button , the button turns orange.

Note: the audio equipment is adaptive, without the user's own settings.

Microphone Input: Input audio from the audio input port of IP Camera, access to the device

on the computer and start the audio function, then can hear speech sounds, to achieve the audio

microphone input. Audio parameters required to be set in the "Settings -> Channels -> Audio

Parameters":

Page 14: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

11 /23

Set the audio input type to “Mic”, when you start a Mic Boost, audio sound will be

amplified.

[Talkback] Click the button , the button icon will become orange. The computer's

microphone input port connected to a microphone, audio output device connected to speakers,

speak into the microphone, speakers play the speech sounds. Talkback IP Camera can set the

output audio volume, as shown below:

Note: Only support by the device with Talkback.

[Snapshot] Click the button per time, IP device will automatically catch a

snapshot with BMP format, and will create a folder by the name of the current date. The default

snapshot path in the local computer is C:\Temp, the snapshot is named with: Device name_1_time.

For example: video server_1_09_26_37. Size and image resolution of the image file is consistent,

if the preview image has superimposed character and time display, you have to capture the images

superimposed character and time display.

[Record] Click the button , the button icon will become orange, recording starts.

Click the button again to stop recording, the icon turns back to be white. The IP device will create

automatically a folder named by the current recording date, and save the recorded file in the

format of *.mp4.in Disk D. The recorded file is named with: Device name_1_time. For example:

“D:\20110305\video server_1_092637.mp4”. If d disk space is full, it will automatically jump to

the next disk to save the video file. If there is not enough disk space, the oldest video files will be

deleted and re-save the latest video files.

4.3.2 Replay

[Video Replay]: Select the "Replay" tab, enter the video replay pages, local computer: as

shown below:

Page 15: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

12 /23

Front-end equipment: front-end SD card recording file search

Select the recording time to replay, click “Search”, there will display the file list in the

segment time under the “File List”.

Page 16: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

13 /23

1. Choose the one you want to replay and click matching icon to playback. After the

video has finished playing the preview window will stay on the image of the last frame.

2. Download: Click the button below "Download" to download remote video files.

3. RTSP historical playback: Click RTSP can play history video files by streaming.

Note: You need to install VLC and QuickTime player software before playing.

[Preview Image Size]: Click the button , , to preview the images with a 1x, 2x,

full-screen of image size, the selected size of the button is indicated with a white background,

when full-screen, you can click the right button to restore.

[Image Buffer]: Click the button , , , , , to set the image buffer

level to 0, 5, 10, 20, 50, 100 respectively; larger the number is, greater the image delay is, but the

image is better fluency, selected buffer button will represent with a white background.

4.3.3 Parameter settings

[Parameter settings]: Select the "Settings" tab, enter the parameter setting page, as shown

below:

Parameter settings include: basic settings, network parameters, channel parameters, alarm

parameters, and front-end storage.

4.3.3.1 Basic Information Set

[Device Name]: Click " Device Name " line, it will unfold the settings page, as shown

below,

Page 17: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

14 /23

Input the name of the device, then click OK to save. You can modify the name.

[Synchronize the date and time]: Click the "Time Setting" line, it will unfold the settings

page, as shown below:

Click the button , the date and time displayed in the

preview window synchronize to the computer system date and time.

[User Management]: Click "User management" line, it will unfold the settings page, as

shown below

The default administrator username / password: 888888/ 888888, you can modify the user

name and password and click "OK" button; after modified the user name and password to re-login

page to view real-time video; Similarly, you can also modify the default username password of

two ordinary users 1 / 1,2 / 2.

[Time to Reboot]: Click "Time to Reboot" line, it will unfold the settings page, as shown

below:

Enter the time to reboot, click "OK", to achieve that the IP Camera reboot at a specified time.

[Restore to Leave Factory Default Parameters]: Click "Restore to Leave Factory Default

Page 18: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

15 /23

Parameters" line, it will unfold the settings page, as shown below:

Click “Restore” button and reboot the IP device, all the parameters will be back to the factory

default parameters, except for the device name and IP address & port.

[System Update]: Click "System Update" line, it will unfold the settings page, as shown

below:

This is used for system upgrade. Click “Browse…”to choose upgrade files of “*. itm” format,

and then click “OK”, until the webpage displays “The program has been updated successfully,

please login again”, the device will reboot automatically.

4.3.3.2 Network parameters

[Network Parameters]: Click "Network Parameters" tab, display the settings of following

parameters below:

[IP Address & Port]: Click " IP Address & Port " line, it will unfold the settings page, as

shown below:

Page 19: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

16 /23

You can modify the IP address, subnet mask, gateway, web port, transmission starting port,

remote host address and port, alarm host address and port, multicast addresses and ports, etc.can

also set up web service port, UPNP, PPPOE dial services start state, click "OK", then click on the

left "Save parameters" button and reboot the device, then take effect.

[DDNS]: Click "DDNS" line, it will unfold the settings page, as shown below:

Select the Enable domain name, select DDNS provider, enter the application DDNS

username / password, domain name, DDNS server address and port, set the local mapping port

and update interval, click "OK." Enter the domain name in the IE address bar, if the normal

domain name to access the device indicates success.

[FTP Parameters]: Click "FTP Parameters" line, it will unfold the settings page, as shown

below:

Start FTP upload, modify computer IP ftp host IP to start ftpserver service, click "OK"; After

starting ftpserver server, set the server IP and FTP directory and start the service, set the alarm

linkage for upload the alarm recording and snapshot to FTP and trigger alarm or start timed

capture uploaded to FTP, the pictures and videos will be uploaded to the computer specified

Page 20: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

17 /23

directory.

[UPNP]: Click "UPNP" line, it will unfold the settings page, as shown below:

Connect the device to the router with UPNP function, WEB service port of devices, data

transfer port, parameters configure port, front-end video file transfer port will be mapped. Status

display maps.

[Streaming Protocol]: Click "Streaming Protocol" line, it will unfold the settings page, as

shown below:

Page 21: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

18 /23

5. Frequent Asked Questions

5.1 Fail to Access the IP Camera through the Browser

Possible Cause: The network is disconnected?

Solution: Connect PC to the network to test whether the network access can work normally.

Firstly clear the cable fault and the network fault caused by PC virus till Ping the network

between PCs successfully.

Possible Cause: IP address is occupied by other equipment.

Solution: Disconnect the IP camera and network, and then connect the IP camera to the PC

solely. Also, reset the IP address according to appropriate recommended operations.

Possible Cause: IP address is located in different subnets.

Solution: Check the settings of the IP address of IP camera, the subnet mask address and

gateway.

Possible Cause: Unknown

Solution: Restore to the factory-set default state by pressing the restore button behind the IP

camera.

5.2 Can Not Play Video after Program Updating

Solution: Close all the browser pages; search “NetViewX Control.cab” file under the

C:\Windows\Downloaded and delete it. Then connect the IP camera by the browser again, the IP

camera real-time view will automatically display after install the plug-in again.

5.3 Fail to Browse Images Normally in Windows98

Solution: Install the DirecteX8.0 or higher version. Update the IE Explore to 6 and above

versions.

5.4 Can Not Get Data Passed Through Switch

Possible Cause:

The address is written wrong?

The bindings of port and physical address are done or not?

When configuring the firewall rule, whether take IP camera into account.

Solution:

Before searching the network fault, please make sure to use the ping command in the

command mode to connect the IP address. To check the message returned from ping is a very

important step. If no message is returned, it indicates that some faults must exist in the network.

If the IP address and Mac address are bound, adding a new binding of IP address and Mac

address of the IP camera within the exchanger is required inside switch.

If the IP camera never be recognized when configuring the firewall rule of switch, it’s

Page 22: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

19 /23

necessary to allow the communication on ports 3000, 3001, 3002, 3003 and 80 for the IP camera.

Otherwise, any data packet will be filtered and can’t reach target.

5.5 Errors Occur After Updating

Delete the buffer of the browser. The detailed steps are as follows: open the tool menu of

browser to open the Internet option, and then click the “Delete File” button in the second item

(temporary file of Internet) and check the “Delete All Offline Contents” option. Then confirm, and

login the IP camera again.

Page 23: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

20 /23

6. Appendix

Appendix A question about the IP Camera port occupancy (map) Explanation

Network cameras occupy the following ports to transmit video by default:

80 ----- WEB port

3000 --- data transmission starting port

3001 --- Data control port3001 --- Data control port

To achieve the public network access to the IP camera, more than three ports need to do port

mapping operation.

If there are multiple IP Cameras in an IP address export, you must change the server

corresponding ports on demand, such as the Web port, data transmission starting port and data

control port.

Appendix B factory default parameters

The factory default network parameters:

Parameters Defaults

IP addresses 192.168.1.19

Subnet Mask 255.255.255.0

Gateway 192.168.1.1

Transmission starting port 3000

Data control port 3001

Remote playback port 3002

Web port 80

Multicast address 235.1.1.1

Multicast port 6500

DDNS OFF

Motion detection OFF

Sensor alarm OFF

PPPOE OFF

Remote host port 3004

Alarm host port 8000

DNS server port 8080

User and Password:

Parameters Defaults

The factory default administrator username 888888

Password 888888

The factory default ordinary user 1 username 1

Password 1

The factory default ordinary user 2 username 2

Page 24: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

21 /23

Password 2

Ordinary users can not log on to set parameters.

Page 25: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

22 /23

7. Explanation of Terms

1. Dual-stream

Dual-stream use one way high rate stream for local HD storage, such as QCIF / CIF / 2CIF /

DCIF / 4CIF encoding, and one way low bit rate stream for network transmission, such as QCIF /

CIF encoding, taking into account both of local storage and remote network transmission。

Dual-stream can achieve local transmission and remote transmission two different needs of

bandwidth stream, local transmission using high stream can achieve higher resolution of video

storage, remote transmission using lower stream to accommodate CDMA / ADSL and other

networks to achieve higher image fluency.

2. DDNS

DDNS (Dynamic Domain Name Server) is that map the dynamic IP address of the user to a

fixed domain name resolution service, users connect to the network each time the client program

will sent the dynamic IP address of the host server program to the service provider located on the

host through information transfer, services program is responsible for providing DNS service and

realize dynamic domain name resolution. It means that DDNS capture every time a user changes

the IP address, then correspond it to the domain name, so that other Internet users can

communicate through the domain name.

3. UPNP

UPnP, Universal Plug and Play, is a set of protocols collectively known, can not be simply

interpreted as UPnP = "automatic port mapping." In BitComet download, UPnP contains two

layers of meaning:

1) For a computer within the network,UPNP of BitComet is a quick way to discover the IP

device on the network. Via UPNP function, the above ports could be mapped

automatically in the router.

2) Gateway or network firewall module of router began to open the port to other computers

on the Internet.

UPNP stands for Universal Plug and Play protocol, in order to realize the architecture of

equal network connection of computer and intelligent electrical equipment. The conversion within

the network address and network address is based on this agreement, so as long as our router

supports upnp, and we use xp operating system that support this protocol, then we can take to

improve the transmission speed point to point.

Enter the router's setup interface, if your router supports upnp and then forwarding rules tab

you will see upnp settings options (different routers may be different), in this option, we choose to

enable upnp, and then we restart the routers. Then we completed the router's settings.

4. NTP

Network Time Protocol (NTP) is a protocol used to synchronize computer time, which can

make the computer do its webcam or clock source (such as quartz, GPS, etc.) synchronization,

which can provide high accuracy of time correction (on the LAN and standard room is less than a

millisecond, the WAN tens of milliseconds), and can be identified via an encrypted way to prevent

malicious protocol attacks.

Page 26: Ultra HD IP Camera DL-3AB0M10-A Operation Guide2015/07/02  · Ultra HD IP Camera DL-3AB0M10-A Operation Guide Dear users, because the native feature set is more professional. Before

23 /23

Thank you for using this IP camera, Because differences between the various models or

the system software upgrade cause that the appearance or function of this manual is

different, please feel free to contact the manufacturer. Sorry for these changes we can not

notify you.