UltiPower 36V 10A Automatic Battery Charger with Desulfation
Transcript of UltiPower 36V 10A Automatic Battery Charger with Desulfation
Nanjing UltiPower Electronic Technology Co.,Ltd BUILDING 5, 157 Zhuangpai Road, Nanjing, 211100 P.R. China
Tel:025 66622632 Fax:025 66622634 www.ultipower.cn
1 / 3
1
UltiPower 36V 10A Automatic Battery Charger
with Desulfation
Model:UBC-260-3610
Brand: UltiPower
Origin: Jiangsu, China
Specification:
UBC-260 36V10A
Input Voltage 110VAC OR 220VAC, 50-60HZ
Charging Voltage 44.1V, or adjust to battery's
specification
Charging Current 10A(MAX)
Ambient Temperature 0°C TO +40°C
Cooling fan cooling
Charger Type 8-step,full automatic switch
mode,(reverse) pulse charging
Appropriated Battery 36V lead acid battery,AGM,AGL,GEL
Battery Capacity 60-100AH
Dimensions 263*116*73mm
Weight 1.9kg
Nanjing UltiPower Electronic Technology Co.,Ltd BUILDING 5, 157 Zhuangpai Road, Nanjing, 211100 P.R. China
Tel:025 66622632 Fax:025 66622634 www.ultipower.cn
2 / 3
2
Main Features:
1. Compact & Delicate & Energy Saving -- Switch Mode Tech
Small and light, as we adopt the switch mode technology or called Switching Power Supply
technology. Compared with traditional Linear Power technology, ours is more energy saving
as more than 85% electric energy was transferred to battery chemical energy during charging
process while traditional tech can only transfer 40%. The tech is suitable for all types of lead
acid batteries (wet,flooded, maintenance free, VRLA, AGM, etc)
2. Automatic -- MCU system
MCU system is applied. The whole charging process is monitored. Multi-stage charging
automatically proceeds. No need for manual interference.
Automatically stops charging when the battery is full. You can leave the charger
connected to the battery indefinitely without the risk of overcharging. Once the battery is
full, the charger monitors the battery’s voltage intermittently. If battery capacity
decreases or voltage drops under set level, the charger can start again to charge battery to
its full. This restart function is set according to user’s requirement, not standard setting.
3. Multi-stage charging-- full charge but never overcharge
Max 8 stage: pre-charging, soft charging, main charging, secondary charging, high constant
voltage charging, 3-minute test, float charging, End maintenance charging.
This way can well transfer electricity into battery according to battery’s absorption ability.
On the one way, save energy; on the other way, protect battery from over-charging,
therefore less gassing or temperature rising. Float charging and End maintenance charging
also help protect battery and prolong its lifetime.
4. Recover Battery Capacity--Pulse & Reverse Pulse Tech
Pulse and reverse pulse technology is applied. The charger generates pulse and reverse
pulse to reduce battery impedance, gassing and temperature rise, restore the sulfate into
liquid to recover battery capacity, therefore to prolong its lifetime. Pulse charging also can
help charge fast and fully.
Nanjing UltiPower Electronic Technology Co.,Ltd BUILDING 5, 157 Zhuangpai Road, Nanjing, 211100 P.R. China
Tel:025 66622632 Fax:025 66622634 www.ultipower.cn
3 / 3
3
5. Digital Display and More Protection
Digital Display shows charging voltage and current and also errors if something wrong with
charger or battery. Floating charging will have time count-down, so that user knows when
battery can be ready.
Polarity Protection: Prevents the output leads from sparking due to accidental reverse
connection or short circuit.
Overcharge and Over-voltage Protection : never worry about overcharging or over-voltage
as charger automatically stops when battery reaches set voltage or current
High Temperature Protection: If charger itself gets to high temperature, it will
automatically lower down its temperature even stop working so that charger is well
protected.
6. Customization
We can change parameter to meet different applications. Make charger specifically for
your battery.
7. CE and RoHS Certification
We have CE and RoHS certification.