Ultimate soft closing in any application...Furniture manufacturers the world over appreciate the...
Transcript of Ultimate soft closing in any application...Furniture manufacturers the world over appreciate the...
Ultimate soft closing in any application: Silent System for Intermat hinges
2
Ultimate soft closing in any application:Silent System for Intermat hinges
3
Intermat provides a broad product line-up for all sorts of applications.
Furniture manufacturers the world over appreciate the reliability and superb quality of Intermat hinges. Ideal for a wealth of different applications, quickly and easily installed, simple to adjust, secure, attrac-tively designed and in a quality you can depend on, Intermat is truly impressive.
The Intermat range features hinges with opening angles of 110° and 125°, thick door hinges with a 95° opening angle, wide-angle hinges with an opening angle of 165°, special-purpose hinges for unu-sual face angles from W-45° to W+90° as well as hinges for glass doors and alu-minium-frame doors. Intermat hinges are available for all common drilling patterns and come with various ways of attaching the hinge cup.
Silent System for Intermat hinges gives a further mark of distinction to your furni-ture range.
4
Committed to responsible practice, active protection, innovative thinking.Hettich and the environment
Hettich accepts responsibility for the world we live in. This aware-ness defines the strict policy of environmental management we practise. Our environmental officer has taken personal responsi-bility for these aspects throughout the group of companies over a period of many years. In addition, a separate environment com-mittee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Regulation. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sus-tainability.
Hettich standard for product materials
Hettich underpins its commitment by applying an internal standard for product materials. This ensures that every product – from pro-duction to disposal – satisfies all environmental requirements. Hettich products are durable. Appropriately foresighted, our rig-orous standards are formulated to ensure that international leg-islation is met as well. This provides a reliable basis for marketing furniture world-wide.
Hettich environmental management
In 1996 Hettich started introducing effective environmental man-agement systems under the stringent EMAS Regulation (currently: EC Regulation No. 761/2001, including EN ISO 14.001/2004). This not only enables us to improve our environmental performance on a broad front but also achieve a high level of safety which, not least, also benefits our customers. This is why we also require our suppliers to meet the necessary minimum standards of envi-ronmental protection, industrial safety, health care and social welfare.The results achieved in the drawer-runner and drawer-system product segment at the Kirchlengern operation illustrate the impressive effects these measures have and verifiably demon-strate our tireless endeavours to translate words into action:
Relief to the environment between 1997 and 2008:
Specific water consumption: 56 per centSpecific power consumption: 21 per centSpecific heat consumption: 84 per centSpecific CO2 emissions: 29 per cent
5
Closing the gentle way: Silent System for Intermat hinges
Easy to clip on
The Silent System element simply clips onto the hinge arm, making it easy to install without the need for tools. Two versions are available: for standard mounting styles and alumini-um-frame doors or for the wide-angle Intermat 9956 hinge.
Elegance for the hinge cup
This particularly stylish Silent System element can be used for standarddoor-mounting styles. It screws onto the hinge cup to form a line with the hinge arm.
Screws on in seconds flat
This Silent System unit attaches to the top or bottom carcase panel with two wood screws without predrilled holes. This option is mainly used in conjunction with hinges for unusual face angles.
High user benefit:
Only one Silent System element is needed on a standard door with two hinges. Soft closing can be optimised to suit the size and weight of the doors at a setting wheel. The attractive cover cap for the hinge arm, also with customised logo, can always be fitted as Silent System never conceals all of the hinges.
Gentle closing: closing furnituredoors produce irritating noise in thehome. Intermat with Silent Systemcontrols the movement of furniture doors, leaving them to close quietly and gently. Peace and quiet are immediately restored, enhancing living comfort in any home si-tuation. And measurably benefiting every furniture user.
Selective application: whether provided as standard or as an optional extra, fitting Silent System is left for the furniture manufacturer to decide. Silent System is either installed during production or later on by the fitter when furniture is assem-bled on location.
1
2$
2%
≤ 24
00
≤ 20
00
≤ 16
00
≤ 90
0
≤ 13,7
≤ 17,1
≤ 22
≤ 7,7
„
door
hei
ghts
door width ≤ 600
: number of Silent Systems : number of hinges
1§
6 www.hettich.com
Silent System for Intermat hingesRange summaryAdvice on use
Hinge Application Drilling pattern
Intermat 9943 Opening angle 110°
overlay
TH 9 046 822
9 057 095* 9 046 472TB 9 046 826
TS 9 046 829
half overlay 9 046 470 9 046 472
inset 9 046 471 9 055 416
Intermat 9944 Opening angle 125°
overlay
TH 9 046 822
9 057 095* 9 046 472TB 9 046 826
TS 9 046 829
half overlay 9 046 470 9 046 472
inset 9 046 471 9 055 416
Intermat 9956 Wide-angle Opening angle 165°
overlay 9 084 643 9 046 472
half overlay 9 084 643 9 046 472
inset
9 084 643 9 055 416
Intermat 9936 Thick door Opening angle 95°
overlay
TH 9 046 823
9 057 095* 9 046 472TB 9 046 827
TS 9 046 830
half overlay
TH 9 046 823
9 046 470 9 046 472TB 9 046 827
TS 9 046 830
inset
TH 9 046 823
9 046 471 9 055 416TB 9 046 827
TS 9 046 830
7Technik für Möbel
Silent System for Intermat hingesRange summaryAdvice on use
Hinge Application Drilling pattern
Intermat 9936 Face angle W20 Opening angle 95°
overlay
9 046 472
inset
9 055 416
Intermat 9936 Face angle W30 Opening angle 95°
overlay 9 046 472
inset 9 055 416
Intermat 9936 Face angle W45 Opening angle 95°
overlay 9 046 472
inset 9 055 416
Intermat 9936 Face angle W90 Opening angle 95°
inset
9 055 416
Intermat 9936 Aluminium-frame door Opening angle 95°
overlay
9 057 095*
half overlay
9 046 470
inset
9 046 471
*Clip on Silent System element 9 057 095 can be used in conjunction with all mounting plate distances. Choose clip on Silent System element 9 046 469 when using internal pot-and-pan drawers and mounting plate distances D ≥ 3 mm
8 www.hettich.com
ø 4 x 18
For screw on mounting on hinge cup Soft closing infinitely adjustable at setting wheel Overlay and depth adjustment capability can be reached without removing Silent System Only one Silent System element is needed for two hinges A cover cap with your customised logo can be fitted on each hinge Can be added at a later stage Zinc die-cast, nickel-plated
Screw on Silent System for hinge cupSilent System for Intermat 9943 / 9944Opening angle 110° / 125°
overlay half overlay inset
Cup assembly Drilling pattern Mounting hole ø x T mm
Basis B 12.5 mm (cranking 0 mm)
Basis B 3 mm (cranking 9.5 mm)
Basis B -3.5 mm (cranking 16 mm)
PU
Screw on TH 42
- 9 046 822 - - 200
Press in TH 43
ø 10 x 11 9 046 822 - - 200
Flash fast assembly TH 44
ø 10 x 11 - - - -
Fix fast assembly TH 45
ø 10 x 11 - - - -
with premounted Euro screw TH 46
ø 5 x 11 9 046 822 - - 200
with premounted wood screw TH 47
ø 2.5 x 11 9 046 822 - - 200
Screw on TB 42
- 9 046 826 - - 200
Press in TB 43
ø 8 x 11 9 046 826 - - 200
Flash fast assembly TB 44
ø 8 x 11 - - - -
Fix fast assembly TB 45
ø 8 x 11 - - - -
with premounted Euro screw TB 46
ø 5 x 11 9 046 826 - - 200
with premounted wood screw TB 47
ø 2.5 x 11 9 046 826 - - 200
Screw on TS 42
- 9 046 829 - - 200
Press in TS 43
ø 10 x 11 9 046 829 - - 200
Flash fast assembly TS 44
ø 10 x 11 - - - -
Fix fast assembly TS 45
ø 10 x 11 - - - -
with premounted Euro screw TS 46
ø 5 x 11 9 046 829 - - 200
with premounted wood screw TS 47
ø 2.5 x 11 9 046 829 - - 200
C
5,5
52
ø 10
ø 35
C
9,5
ø 8
45ø 35
C6
48ø 35
ø 10
Screw on Silent System for hinge cup
9Technik für Möbel
ø 4 x 18
For screw on mounting on hinge cup Soft closing infinitely adjustable at setting wheel Overlay and depth adjustment capability can be reached without removing Silent System Only one Silent System element is needed for two hinges A cover cap with your customised logo can be fitted on each hinge Can be added at a later stage Zinc die-cast, nickel-plated
Screw on Silent System for hinge cupSilent System for Intermat 9936Opening angle 95°
overlay half overlay inset
Cup assembly Drilling pattern Mounting hole ø x T mm
Basis B 12.5 mm (cranking 0 mm)
Basis B 3 mm (cranking 9.5 mm)
Basis B -3.5 mm (cranking 16 mm)
PU
Screw on TH 42
- 9 046 823 9 046 823 9 046 823 200
Press in TH 43
ø 10 x 11 9 046 823 9 046 823 9 046 823 200
Flash fast assembly TH 44
ø 10 x 11 - - - -
Fix fast assembly TH 45
ø 10 x 11 - - - -
with premounted Euro screw TH 46
ø 5 x 11 9 046 823 9 046 823 9 046 823 200
with premounted wood screw TH 47
ø 2.5 x 11 9 046 823 9 046 823 9 046 823 200
Screw on TB 42
- 9 046 827 9 046 827 9 046 827 200
Press in TB 43
ø 8 x 11 9 046 827 9 046 827 9 046 827 200
Flash fast assembly TB 44
ø 8 x 11 - - - -
Fix fast assembly TB 45
ø 8 x 11 - - - -
with premounted Euro screw TB 46
ø 5 x 11 9 046 827 9 046 827 9 046 827 200
with premounted wood screw TB 47
ø 2.5 x 11 9 046 827 9 046 827 9 046 827 200
Screw on TS 42
- 9 046 830 9 046 830 9 046 830 200
Press in TS 43
ø 10 x 11 9 046 830 9 046 830 9 046 830 200
Flash fast assembly TS 44
ø 10 x 11 - - - -
Fix fast assembly TS 45
ø 10 x 11 - - - -
with premounted Euro screw TS 46
ø 5 x 11 9 046 830 9 046 830 9 046 830 200
with premounted wood screw TS 47
ø 2.5 x 11 9 046 830 9 046 830 9 046 830 200
C
5,5
52
ø 10
ø 35
C
9,5
ø 8
45ø 35
C6
48ø 35
ø 10
Screw on Silent System for hinge cup
10 www.hettich.com
For clipping onto hinge arm Soft closing infinitely adjustable at setting wheel Only one Silent System element is needed for two hinges A cover cap with your customised logo can be fitted on every second hinge Toolless installation / removal Can be added at a later stage Zinc die-cast, nickel-plated
Clip on Silent System for hinge armSilent System for Intermat 9936 / 9943 / 9944Opening angle 95° / 110° / 125°
overlay half overlay inset
Cup assembly Drilling pattern Mounting hole ø x T mm
Basis B 12.5 mm (cranking 0 mm)
Basis B 3 mm (cranking 9.5 mm)
Basis B -3.5 mm (cranking 16 mm)
PU
Screw on TH 42
- 9 057 095* 9 046 470 9 046 471 200
Press in TH 43
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
Flash fast assembly TH 44
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
Fix fast assembly TH 45
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted Euro screw TH 46
ø 5 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted wood screw TH 47
ø 2.5 x 11 9 057 095* 9 046 470 9 046 471 200
Screw on TB 42
- 9 057 095* 9 046 470 9 046 471 200
Press in TB 43
ø 8 x 11 9 057 095* 9 046 470 9 046 471 200
Flash fast assembly TB 44
ø 8 x 11 9 057 095* 9 046 470 9 046 471 200
Fix fast assembly TB 45
ø 8 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted Euro screw TB 46
ø 5 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted wood screw TB 47
ø 2.5 x 11 9 057 095* 9 046 470 9 046 471 200
Screw on TS 42
- 9 057 095* 9 046 470 9 046 471 200
Press in TS 43
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
Flash fast assembly TS 44
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
Fix fast assembly TS 45
ø 10 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted Euro screw TS 46
ø 5 x 11 9 057 095* 9 046 470 9 046 471 200
with premounted wood screw TS 47
ø 2.5 x 11 9 057 095* 9 046 470 9 046 471 200
*Clip on Silent System element 9 057 095 can be used in conjunction with all mounting plate distances. Choose clip on Silent System 9 046 469 when using internal pot-and-pan drawers and mounting plate distances D ≥ 3 mm
Clip on Silent System for hinge arm
C
5,5
52
ø 10
ø 35
C
9,5
ø 8
45ø 35
C6
48ø 35
ø 10
11Technik für Möbel
For clipping onto hinge arm Soft closing infinitely adjustable at setting wheel Only one Silent System element is needed for two hinges Toolless installation / removal Can be added at a later stage Zinc die-cast, nickel-plated
Clip on Silent System for hinge armSilent System for Intermat 9956Opening angle 165°
overlay half overlay inset
Cup assembly Drilling pattern Mounting hole ø x T mm
Basis B 12.5 mm (cranking 0 mm)
Basis B 3 mm (cranking 9.5 mm)
Basis B 3 mm (cranking 9.5 mm)
PU
Screw on TH 42 / TH 52
- 9 084 643 9 084 643 9 084 643 100
Press in TH 43 / TH 53
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
Flash fast assembly TH 44 / TH 54
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
Fix fast assembly TH 45 / THS 55
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
with premounted Euro screw TH 46 / TH 56
ø 5 x 11 9 084 643 9 084 643 9 084 643 100
with premounted wood screw TH 47 / TH 57
ø 2.5 x 11 9 084 643 9 084 643 9 084 643 100
Screw on TB 42 / TB 52
- 9 084 643 9 084 643 9 084 643 100
Press in TB 43 / TB 53
ø 8 x 11 9 084 643 9 084 643 9 084 643 100
Flash fast assembly TB 44 / TB 54
ø 8 x 11 9 084 643 9 084 643 9 084 643 100
Fix fast assembly TB 45 / TB 55
ø 8 x 11 9 084 643 9 084 643 9 084 643 100
with premounted Euro screw TB 46 / TB 56
ø 5 x 11 9 084 643 9 084 643 9 084 643 100
with premounted wood screw TB 47 / TB 57
ø 2.5 x 11 9 084 643 9 084 643 9 084 643 100
Screw on TS 42 / TS 52
- 9 084 643 9 084 643 9 084 643 100
Press in TS 43 / TS 53
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
Flash fast assembly TS 44 / TS 54
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
Fix fast assembly TS 45 / THS 55
ø 10 x 11 9 084 643 9 084 643 9 084 643 100
with premounted Euro screw TS 46 / TH 56
ø 5 x 11 9 084 643 9 084 643 9 084 643 100
with premounted wood screw TS 47 / TH 57
ø 2.5 x 11 9 084 643 9 084 643 9 084 643 100
Clip on Silent System for hinge arm
C
5,5
52
ø 10
ø 35
C
9,5
ø 8
45ø 35
C6
48ø 35
ø 10
12 www.hettich.com
For screw on mounting on carcase top or bottom panel Soft closing infinitely adjustable at setting wheel Overlay and depth adjustment capability can be reached without removing the Silent system element Only one Silent System element is needed for two hinges A cover cap with your customised logo can be fitted on every hinge Toolless installation / removal Can be added at a later stage Zinc die-cast, nickel-plated
Screw on Silent System for carcaseSilent System for Intermat 9936 face anglesOpening angle 95°
overlay inset
Cup assembly Drilling pattern Mounting hole ø x T mm
PU
Screw on TH 42
- 9 046 472 9 055 416 200
Press in TH 43
ø 10 x 11 9 046 472 9 055 416 200
Flash fast assembly TH 44
ø 10 x 11 9 046 472 9 055 416 200
Fix fast assembly TH 45
ø 10 x 11 9 046 472 9 055 416 200
with premounted Euro screw TH 46
ø 5 x 11 9 046 472 9 055 416 200
with premounted wood screw TH 47
ø 2.5 x 11 9 046 472 9 055 416 200
Screw on TB 42
- 9 046 472 9 055 416 200
Press in TB 43
ø 8 x 11 9 046 472 9 055 416 200
Flash fast assembly TB 44
ø 8 x 11 9 046 472 9 055 416 200
Fix fast assembly TB 45
ø 8 x 11 9 046 472 9 055 416 200
with premounted Euro screw TB 46
ø 5 x 11 9 046 472 9 055 416 200
with premounted wood screw TB 47
ø 2.5 x 11 9 046 472 9 055 416 200
Screw on TS 42
- 9 046 472 9 055 416 200
Press in TS 43
ø 10 x 11 9 046 472 9 055 416 200
Flash fast assembly TS 44
ø 10 x 11 9 046 472 9 055 416 200
Fix fast assembly TS 45
ø 10 x 11 9 046 472 9 055 416 200
with premounted Euro screw TS 46
ø 5 x 11 9 046 472 9 055 416 200
with premounted wood screw TS 47
ø 2.5 x 11 9 046 472 9 055 416 200
Screw on Silent System for carcase
C
5,5
52
ø 10
ø 35
C
9,5
ø 8
45ø 35
C6
48ø 35
ø 10
13Technik für Möbel
1
6032
20
20
24
10 X
ø 3,5 x 16
Dimension X = value shown in table + mounting plate distance
Screw on Silent System for carcaseDrilling hole position
Defining dimension X
Installation drawing
Hinge Mounting situation Door widths in mm
≤ 300 ≤ 450 ≤ 600
Intermat 9943 Opening angle 110°
overlay (cranking 0 mm) 20.5 mm 28.5 mm 35.5 mm
half overlay (cranking 9.5 mm) 30 mm 38 mm 45 mm
inset (cranking 16 mm) 36.5 mm 44.5 mm 51.5 mm
Intermat 9944 Opening angle 125°
overlay (cranking 0 mm) 20.5 mm 28.5 mm 35.5 mm
half overlay (cranking 9.5 mm) 30 mm 38 mm 45 mm
Intermat 9956 Wide angle Opening angle 165°
overlay (cranking 0 mm) 59.5 mm 67.5 mm 74.5 mm
half overlay (cranking 9.5 mm) 69 mm 77 mm 84 mm
inset* (cranking 9.5 mm) 69 mm 77 mm 84 mm
Intermat 9936 Thick door Opening angle 95°
overlay (cranking 0 mm) 20.5 mm 28.5 mm 35.5 mm
half overlay (cranking 9.5 mm) 30 mm 38 mm 45 mm
inset (cranking 16 mm) 36.5 mm 44.5 mm 51.5 mm
Intermat 9936 Face angle W20 Opening angle 95°
overlay (cranking 0 mm) 33.5 mm 41.5 mm 48.5 mm
overlay (cranking 7 mm) 25.5 mm 33.5 mm 40.5 mm
inset (cranking -9 mm) 42 mm 50 mm 57 mm
Intermat 9936 Face angle W30 Opening angle 95°
overlay (cranking 7 mm) 25.5 mm 33.5 mm 40.5 mm
inset (cranking -10 mm) 43 mm 51 mm 58 mm
Intermat 9936 Face angle W45 Opening angle 95°
overlay (cranking 0 mm) 31.5 mm 39.5 mm 46.5 mm
overlay (cranking 6 mm) 32.5 mm 40.5 mm 47.5 mm
overlay (cranking 11 mm) 22 mm 30 mm 37 mm
inset (cranking -17 mm) 49.5 mm 57.5 mm 64.5 mm
Intermat 9936 Face angle W90 Opening angle 95°
inset (cranking 5 mm) 41 mm 49 mm 56 mm
* In conjunction with mounting plate of sufficient height or with parallel adapters
www.hettich.com
Ord
er n
o.: 9
158
125
1310
-039
_Int
erm
at_1
013_
HO
N/e
n