ulti eto saeats eeto and staine Type CTM 1, CTM 2, CTM6Installation guide ulti eto saeats eeto and...
Transcript of ulti eto saeats eeto and staine Type CTM 1, CTM 2, CTM6Installation guide ulti eto saeats eeto and...
-
Installation guide
Multi Ejector (spareparts: ejector and strainer) Type CTM 1, CTM 2, CTM6
032R
9791
032R
9791
© Danfoss | DCS (az) | 2018.06 DKRCC.PI.VM0.B2.02 | 1
English
1
3
2
4
Danfoss32F1007.20
Allen key 5 mm
Danfoss32F1008.10
5 6
Service on strainer
Remove strainer from valve body Dismount strainer
Allen key 5 mm
Allen key 5 mm
Allen key 5 mmTorque 6 Nm ± 1
Clean / replace strainer/replace O-ring
Mount strainer with screws
Assemble strainer
Oil O-rings and place strainer in valve
= compressor oil
Danfoss32F897.10
A
B
C
D
Danfoss32F898.20
8
Allen key 5 mm
7
Danfoss32F899.10
Tighteninig sequence
Allen key 5 mmTorque 10 Nm ± 1
-
© Danfoss | DCS (az) | 2018.06 DKRCC.PI.VM0.B2.02 | 2
1
3
2Danfoss32F1011.20
Allen key 5 mm
Danfoss32F1012.10
Danfoss32F1013.10
Service on ejector
Remove ejector from valve body Replace complete ejector
Oil O-rings and place ejector
Danfoss32F877.20
1
3
2
Remove strainer from valve body
Dismount strainer
5 mm allen key
Torque 6 Nm ± 1
Clean or replace strainerand replace O-ring
5 mm allen key45 6
Assemble strainer Oil O-rings and placestrainer in valve
Mount the strainerwith screws
7
8
A
B
C
D
1
3
2
Danfoss32F855.10
A
B
C
D
Remove ejector from valve body Replace complete ejector Mount the ejector with screws Oil O-rings and place ejector
= compressor oil
Allen key 5 mm
Allen key 5 mm
Allen key 5 mmTorque 10 Nm ± 1
Allen key 5 mmTorque 10 Nm ± 1
Tightening sequence
Allen key 5 mmTorque 10 Nm ± 1
Mount the ejector with screws
Allen key 5 mm