UBSFIXED-ANGLEF I X E D - A N G L E U N D E R B O D Y S C R A P E R

This rugged, fixed angle underbody scraper is designed to remove snow and ice at high speeds under the toughest conditions imaginable. Easy installation/removal and single lever operation, makes for ease of use. Then by removing unnecessary parts and simplifying the hydraulics, this Fixed Angle Underbody Scraper is priced to fit within your budget.

FIXED-ANGLE UNDERBODY SCRAPERHFA-UBS 10’ HFA-UBS 11’ HFA-UBS 12’

MOLDBOARD LENGTH 10” 11” 12” OVERALL HEIGHT 20” 20” 20” CUTTING WIDTH @ 45° ANGLE 84” 93” 102” MOLDBOARD THICKNESS 1/2” 1/2” 1/2”

Fixed right or left cutting angle35° - 45°

.5” x 6” double beveled cutting edge

Powder coat black

69” long x 1.5” diameter hinge shaft with four 1” pivots

Hanger bracket2 3/8” solid rod

.5” thick moldboard20” height

Available in 10’, 11’ or 12’ lengths

Hanger bracket2 3/8” solid rod

Hanger bracket2 3/8” OD tubing

Lift cylinder with spring canister3” diameter boreNitrided 1.5” rod

nRelief valve for down pressurenWrap Around Curb Guardn5/8” x 8” Curved Cutting Edgen3/4” x 6” Curved Carbide Cutting EdgenDouble lift canistersn1” thick moldboard

OPTIONS

A Road Maintenance Solution the Works All Year

© Henderson Products, Inc., A division of Douglas Dynamics, L.L.C., reserves the right in pursuit of continuous product improvement to change specifications used herein. As a custom manufacturer of truck bodies, truck equipment and brine systems, additional product options may be available that are not shown here.

COMPLETE MUNICIPAL SNOW & ICE CONTROL SOLUTIONSPLOWS n WINGS n UNDERBODY SCRAPERS n SAND & SALT SPREADERS n STANDARD & PRECISION SPINNERS n DUMP BODIES n COMBINATION (MUNICIPAL) BODIES

BRINE PRODUCTION & MANAGEMENT SYSTEMS n ANTI-ICE SYSTEMS n PRE-WET SYSTEMS n SLURRY SYSTEMS n COMPLETE TURNKEY PACKAGES

1085 S. Third Street, Manchester, IA 52057Toll Free: (800) 359-4970 www.HendersonProducts.com HP-125 05/20

M A D E I N U S A

CONTRACT: 080818-HPI