TYROLIT fLap dIsc Range · TYROLIT fLap dIsc Range Perfect solutions for every aPPlication A...

TYROLIT fLap dIsc Range Perfect solutions for every aPPlication

A Company of the SWAROVSKI Groupwww.tyrolit.com

2contents

Premium Longlife for steel 4-5

Premium Cerabond flap disc for InOx 5-6

Premium 2in1 for steel & stainless steel 7-8

Premium 2in1 for steel & stainless steel shape 27n 8-9

Premium Longlife for steel & stainless steel 9-10

Premium Fastcut for steel & stainless steel 10-11

Premium Overlap for steel & stainless steel 12

Premium Ceramic for InOx 13-14

Premium for steel 14-15

Premium for non-ferrous metals 16-17

Premium Combi for steel & stainless steel 17

Standard 2in1 19-20

Standard Minidisc for steel & stainless steel 20-21

Standard Softjob for steel & stainless steel 21-22

Basic 2in1 for steel & stainless steel 22-23

cOnTenTs

Steel

InOx

2in1

Aluminium

Angle grinder

Straight grinder

Personal safety

Use gloves

Heed the safety recommendation

Do not use damaged discs

Manufactured without substances containing Fe, S or Cl

Products marked with an asterisk (*) are not stock types and are only available on demand.

pIcTOgRams

facTs & fIguRes

– Vs = 80 m/s

– Without substances containing Fe, S or Cl

– Conforms to En 13743

– A – Regular aluminium oxide

– ZA – Zirconia alumina

– CA – Ceramic grain

TYROLIT quality lines

pRemIum

– Highest abrasiveness

– Above-average lifetime

– Most extensive assortment

– Highest levels of productivity

sTandaRd

– Very good abrasiveness

– Very long lifetime

– Very broad assortment

– Very high productivity

BasIc

– Good abrasiveness

– Long lifetime

– Broad assortment

– High productivity

3flaP disc range at a glance

Innovations and new additions

2in1 Both for steel and stainless steel Material: Steel/InOx longlife Additionally offers longer lifetime Material: Steel/InOx fast cut Additionally offers higher abrasiveness and cutting ability Material: Steel/InOx

overlaP Special structure of the flaps for greater flexibility when machining difficult to reach places Material: Steel/InOx ceramic Features a self-sharpening ceramic grinding grain Material: InOx for steel Specially developed for steel Material: Steel

for non-ferrous metals Specially developed for non-ferrous metals Material: nF metals comBi For simultaneous removal and finishing of the surface Material: Steel/InOx

pRemIum ceRaBOnd

With ceramic grain and the unique Cerabond bonding system Material: InOx

TYROLIT flap disc range at a glance

pRemIum fLap dIscs

sTandaRd fLap dIscs

BasIc fLap dIscs

pRemIum LOngLIfe

Highest stock removal rate with maximum lifetime Material: Steel

2in1 Both for steel and stainless steel Material: Steel/InOx

softjoB High flexibility through special arrangement of the grinding flaps Material: Steel/InOx

2in1 Both for steel and stainless steel Material: Steel/InOx

4

+ Great savings potential: 100% use of the disc is guaranteed through simple trimming.

+ Unparalleled performance: The newly developed high-tech zirconium cloth enables outstanding removal results with maximum lifetime

Premium longlife for steel

The PREMIUM*** LOnGLIFE is a high-performance flap disc for steel and offers its users excellent stock removal and an optimum lifetime. A stock removal of more than 4000 g with only one disc opens up a com-pletely new dimension. A natural fibre body gives the tool additional flexi-bility, meaning that the PREMIUM*** LOnGLIFE fits the workpiece surface perfectly and creates clean grinding transitions.

pRemIum longlife for steel

pRemIum longlife for steel

Shape Type number Dimension Specification PU

28nF 34063393 115x22.23 ZA40-B 10

34063394 115x22.23 ZA60-B 10

34063396 115x22.23 ZA80-B 10

34063397 115x22.23 ZA120-B 10

34063388 125x22.23 ZA40-B 10

34063389 125x22.23 ZA60-B 10

34063390 125x22.23 ZA80-B 10

34063391 125x22.23 ZA120-B 10

34063398 150x22.23 ZA40-B 10

+ Environmentally compatible: The innovative body made of natural fibre is completely free of fibre glass and therefore reduces the environmental load.

Stock removal rate in grams

comPetitor 3

comPetitor 1

comPetitor 2

pRemIum longlife

0 50003000 40001000 2000

5Premium ceraBond flaP disc for inox 5

+ Enhanced abrasiveness: A new and broader PREMIUM cloth and the Cerabond bonding system offer high stock removal on the workpiece.

+ Longer lifetime: The unique bond system prevents the premature break-out of the grain and leads to a long lifetime for the product.

+ Enhanced economic efficiency: Thanks to the self-sharpening, ceramic grain, the Cerabond flap disc is also optimally suited for demanding grinding jobs.

pRemIum ceraBond flaP disc for stainless steel

1. 2. 3.

We at TYROLIT always endeavour to bring our customers innovative products and a comprehensive assort-ment. For this reason, TYROLIT has now extended the Cerabond family to include the new ceramic flap discs. A unique bond system combined with a high-performance PREMIUM cloth offers the user greater abrasiveness. In addition, Cerabond offers broader flaps for a longer lifetime and a higher overall abrasion.

Stock removal rate

comPetitor 1

comPetitor 2

ceRaBOnd sYsTem

1. Before grinding. 2. With a normal bond it is not possible to bind the hard and brittle grain through to the end. 3. The Cerabond technology enables optimal bonding of the ceramic grain.


28nF 34063399 150x22.23 ZA60-B 10

34063400* 150x22.23 ZA80-B 10

34063401* 150x22.23 ZA120-B 10

34063402 178x22.23 ZA40-B 10

34063403 178x22.23 ZA60-B 10

34063404* 178x22.23 ZA80-B 10

34063406* 178x22.23 ZA120-B 10

6Premium ceraBond flaP disc for inox

pRemIum ceraBond flaP discs for inox


27A 34043514 115x22.23 CA40-B 5

34043515 115x22.23 CA60-B 5

34043516 125x22.23 CA40-B 5

34043517 125x22.23 CA60-B 5

27n 34057966* 115x22.23 CA40-B 5

34057967* 115x22.23 CA60-B 5

34057968* 125x22.23 CA40-B 5

34057969* 125x22.23 CA60-B 5

7Premium 2in1 for steel and stainless steel 7

+ Large selection: The PREMIUM*** flap disc is available in all current diameters and grain sizes.

+ Universal use: Achieves optimal results both on steel and stainless steel.

The PREMIUM*** 2in1 flap disc offers two advantages. On the one hand, it offers the user maximum lifetime, on the other it guarantees a very high

specific stock removal. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed

steels. Problem-free weld machining as well as edge and surface grinding particularly when used on powerful angle grinders.

pRemIum 2in1 for steel & stainless steel

pRemIum 2in1 for steel and stainless steel


27A 668642 115x22.23 ZA40-B 10

668644 115x22.23 ZA60-B 10

668649 115x22.23 ZA80-B 10

643803 115x22.23 ZA120-B 10

668663 125x22.23 ZA40-B 10

668664 125x22.23 ZA60-B 10

668665 125x22.23 ZA80-B 10

643805 125x22.23 ZA120-B 10

519212 150x22.23 ZA40-B 10

519213* 150x22.23 ZA60-B 10

519214* 150x22.23 ZA80-B 10

519215* 150x22.23 ZA120-B 10

668670 178x22.23 ZA40-B 10

668672 178x22.23 ZA60-B 10

668673 178x22.23 ZA80-B 10

643807 178x22.23 ZA120-B 10

+ Ease of use: Effortless machining of welding seams, as well as edge grinding and surface grinding.

8Premium 2in1 for steel and stainless steel shaPe 27n 8

+ Reduced working hours: Laborious rework becomes unnecessary through having the best possible grinding angle.

+ Reduced workload: Vibrations are reduced due to the newly-shaped plastic body.

For us, good is not good enough. This is why we are offering the PREMIUM*** flap disc 2in1 in a new shape to improve your work results.

The plastic body with the 27n shape gives the user an optimal grinding angle of 25-35 degrees. As a result there is no longer any scratching

or damage on the workpiece and the individual flaps can be utilised optimally.

pRemIum 2in1 for steel & stainless steel shaPe 27n

+ Enhanced economic efficiency: The option to reset the body provides optimal utilisation of the individual flaps.

+ Optimal grinding angle of 25-35°.


28A 668686 115x22.23 ZA40-B 10

668687 115x22.23 ZA60-B 10

668691 115x22.23 ZA80-B 10

846344* 115x22.23 ZA120-B 10

668692 125x22.23 ZA40-B 10

668693 125x22.23 ZA60-B 10

668694 125x22.23 ZA80-B 10

645145* 125x22.23 ZA120-B 10

668696 178x22.23 ZA40-B 10

668697 178x22.23 ZA60-B 10

668698* 178x22.23 ZA80-B 10

643823* 178x22.23 ZA120-B 10

9Premium longlife for steel & stainless steel

pRemIum 2in1 for steel and stainless steel shaPe 27n


27n 34043471 115x22.23 ZA40-B 10

34043472 115x22.23 ZA60-B 10

34043473 115x22.23 ZA80-B 10

34043474 115x22.23 ZA120-B 10

34043475 125x22.23 ZA40-B 10

34043476 125x22.23 ZA60-B 10

34043477 125x22.23 ZA80-B 10

34043478 125x22.23 ZA120-B 10

34043479* 150x22.23 ZA40-B 10

34043480* 150x22.23 ZA60-B 10

34043481* 150x22.23 ZA80-B 10

34043482* 150x22.23 ZA120-B 10

pRemIum longlife for steel & stainless steel

+ Excellent overall abrasion: Offers not only a long lifetime, but also good results in terms of abrasiveness.

+ Robust construction: Through the increased number of closely spaced flaps, this disc can withstand even the highest loads.

The PREMIUM*** LOnGLIFE flap disc offers a maximum lifetime and an excellent stock removal rate. The TYROLIT LOnGLIFE flap disc is used

both on high alloyed steels and stain-less steel, as well as on unalloyed and low alloyed steels. Problem-free weld machining as well as edge and

surface grinding particularly when used on powerful angle grinders.

+ Maximum lifetime: The PREMIUM*** Longlife offers even longer lifetime with consistent grinding results.

10Premium fastcut for steel and stainless steel

pRemIum longlife for steel and stainless steel


28n 680369 115x22.23 ZA40-B 10

680373 115x22.23 ZA60-B 10

680376 115x22.23 ZA80-B 10

680377 115x22.23 ZA120-B 10

680379 125x22.23 ZA40-B 10

680380 125x22.23 ZA60-B 10

680383 125x22.23 ZA80-B 10

680386 125x22.23 ZA120-B 10

680387 178x22.23 ZA40-B 10

680388 178x22.23 ZA60-B 10

680389 178x22.23 ZA80-B 10

680390 178x22.23 ZA120-B 10

+ Excellent stock removal: Over the entire duration of its use, the PREMIUM*** Fastcut is free-cutting and abrasive.

+ Cool grinding: This disc leads to no discolouration on the tool and thus also prevents difficult rework.

The PREMIUM*** FASTCUT repre-sents excellent, specific abrasion of material. As a result, you will achieve your goal faster, and the disk will remain free-cutting and abrasive

over its entire lifetime. The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding jobs, such as edge grinding and weld machining. It is used both on high alloyed steels

and stainless steel, as well as on unalloyed and low alloyed steels. It is also possible to use it on aluminium, to a limited extent.

pRemIum fastcut for steel & stainless steel

+ High abrasiveness: Through the extraordinary cutting ability of this disc, the working time is significantly reduced for the operator.

11Premium fastcut for steel & stainless steel

pRemIum fastcut for steel and stainless steel


27A 528580 100x16 ZA40-B 10

643845* 100x16 ZA60-B 10

643846* 100x16 ZA80-B 10

160229 115x22.23 ZA40-B 10

160230 115x22.23 ZA60-B 10

160235 115x22.23 ZA80-B 10

160240 125x22.23 ZA40-B 10

160242 125x22.23 ZA60-B 10

160244 125x22.23 ZA80-B 10

160245 178x22.23 ZA40-B 10

160246 178x22.23 ZA60-B 10

160247* 178x22.23 ZA80-B 10

28A 160249 115x22.23 ZA40-B 10

160251 115x22.23 ZA60-B 10

160252 115x22.23 ZA80-B 10

160254 125x22.23 ZA40-B 10

160255 125x22.23 ZA60-B 10

160256 125x22.23 ZA80-B 10

160257* 178x22.23 ZA40-B 10

160258* 178x22.23 ZA60-B 10

160260* 178x22.23 ZA80-B 10

458028 115x22.23 ZA40-B 10

28n 458029 115x22.23 ZA60-B 10

458030 115x22.23 ZA80-B 10

458034 125x22.23 ZA40-B 10

458033 125x22.23 ZA60-B 10

458031 125x22.23 ZA80-B 10

12Premium overlaP for steel and stainless steel 12

pRemIum overlaP for steel & stainless steel

+ Enhanced flexibility: Thanks to the longer flaps, it is also possible to machine difficult to reach places.

+ Universal use: Achieves optimal results on both steel and stainless steel.

The PREMIUM*** Overlap is the right tool to help effortlessly access hard-to-reach areas. Its flaps overlap

by about 10 mm and simplifies the finishing of fillet welds, grooves and flutes. The OVERLAP flaps also im-

press in terms of stock removal rate and lifetime when used on steel and stainless steel.

+ Ease of use: The perfect tool for finishing fillet welds, grooves and flutes.

pRemIum overlaP for steel and stainless steel


27A 540688 125x22.23 ZA40-B 10

540689 125x22.23 ZA60-B 10

13Premium ceramic for inox

+ Reduced workload: The high abrasiveness of the disc requires less pressure on the part of the operator.

+ Consistent surface result: Even grinding surface pattern thanks to uniformly free-cutting ceramic grain.

+ Maximum abrasiveness: The PREMIUM*** Ceramic flap disc achieves the highest values in terms of abrasiveness and therefore offers the greatest possible stock removal.

pRemIum

ceramic for inox

By virtue of the self-sharpening, ce-ramic abrasive grain, the PREMIUM*** CERAMIC flap disc is particularly suitable for high alloyed steels and

demanding grinding applications. The cool grinding ensures a longer tool life and reduces discolouration on the workpiece surface. Thanks to the

self-sharpening characteristic of the abrasive grain, a more even surface quality is achieved over the entire life-time of the disc.

Grinding duration Grinding duration

Ceramic Zirconium aluminium oxideThe aluminium oxide crystals (Al2O3) contained in the ceramic grain are combined together through a sintering process. As a result of the grinding forces, these microcrystals break out in the grinding process, thus constantly creating new cutting edges.

pRemIum ceramic for inox


27A 645130 115x22.23 CA40-B 10

645132 115x22.23 CA60-B 10

645135 125x22.23 CA40-B 10

645137 125x22.23 CA60-B 10

14Premium for steel

pRemIum for steel

+ Refined surface profile: Using regular aluminium oxide abrasive grain produces a fine surface structure.

+ Good price/ performance ratio: For pure steel applications this disc offers the user a good price/performance ratio.

The Premium*** flap disc for steel is a versatile professional tool suitable for universal grinding jobs. With this disc, users will achieve perfect surfaces on

steel, as well as the best results for surface/edge grinding and deburring work. The supporting disc is made of rigid fibre glass and is therefore

optimally suited for use on high-per-formance angle grinders.

+ Very good results: This PREMIUM*** flap disc achieves the best results when it comes to grinding uneven surfaces as well as surface/edge grinding and deburring work.

pRemIum for steel


27A 668630 115x22.23 A40-B 10

668631 115x22.23 A60-B 10

668632 115x22.23 A80-B 10

668633 115x22.23 A120-B 10


28A 719797* 115x22.23 CA40-B 10

719798* 115x22.23 CA60-B 10

719799* 125x22.23 CA40-B 10

719800* 125x22.23 CA60-B 10

28n 719840* 115x22.23 CA40-B 10

719841* 115x22.23 CA60-B 10

719846* 125x22.23 CA40-B 10

719847* 125x22.23 CA60-B 10

15Premium for steel


27A 668634 125x22.23 A40-B 10

668635 125x22.23 A60-B 10

668637 125x22.23 A80-B 10

896379 125x22.23 A120-B 10

668638 178x22.23 A40-B 10

668640 178x22.23 A60-B 10

668641* 178x22.23 A80-B 10

75193* 178x22.23 A120-B 10

28A 668679 115x22.23 A40-B 10

795077 115x22.23 A60-B 10

699984 115x22.23 A80-B 10

642626* 115x22.23 A120-B 10

668681 125x22.23 A40-B 10

728528 125x22.23 A60-B 10

817672 125x22.23 A80-B 10

817935* 125x22.23 A120-B 10

668683* 178x22.23 A40-B 10

886353* 178x22.23 A60-B 10

642627* 178x22.23 A80-B 10

642628* 178x22.23 A120-B 10

16Premium for non-ferrous metals

pRemIum for non-ferrous metals


27A 707005 115x22.23 CA40-B 10

707007 115x22.23 CA60-B 10

707008 115x22.23 CA80-B 10

707010* 115x22.23 CA120-B 10

707011 125x22.23 CA40-B 10

707012 125x22.23 CA60-B 10

707013 125x22.23 CA80-B 10

707014 125x22.23 CA120-B 10

707015 178x22.23 CA40-B 10

707016 178x22.23 CA60-B 10

707017* 178x22.23 CA80-B 10

707018* 178x22.23 CA120-B 10

28A 707153 115x22.23 CA40-B 10

707155 115x22.23 CA60-B 10

707156* 115x22.23 CA80-B 10

707158* 115x22.23 CA120-B 10

707159 125x22.23 CA40-B 10

707160 125x22.23 CA60-B 10

+ Reduced costs: Reduces the need for disc changes by preventing clogging during machining of nF metals.

+ Enhanced abrasiveness: The abrasiveness of this flap disc is enhanced by supplying ceramic grain.

With the specification developed specifically for non-ferrous metals, the usual smearing and blunting of the flap disc is prevented. The

supplied ceramic grain promotes self-cleaning and sharpening of the disc during material removal. This tool offers comfortable and high-per-

formance results on difficult to grind materials such as aluminium, alumin-ium bronze, aluminium alloy, copper, bronze, brass and nickel silver.

pRemIum for non-ferrous metals

+ Consistent performance: The mixture of different abrasive grains prevents clogging of the disc and thus offers consistent performance through to the end.

17

+ High economic efficiency: The PREMIUM*** Combi offers a long lifetime and thereby reduces tool consumption.

+ Reduced workload: Low dust generation reduces the negative impact on the operator's health.

The PREMIUM*** Combi combines abrasive cloth and fabric in one tool. With this two work steps can be performed in one. Material removal and simultaneous finishing of sur-

faces produce an optimal result. The long lifetime of the PREMIUM*** Combi dramatically increases eco-nomic efficiency in comparison to conventional “surface conditioning”

discs. The disc was also specially developed to achieve good results at high speeds, on non-adjustable angle grinders (max. 80 m/s).

pRemIum comBi for steel & stainless steel

+ Versatile use: Stock removal and simultaneous grinding of uneven surfaces with only one product.

pRemIum comBi for steel and stainless steel

Shape Type number Dimension Specification PU Recommended peripheral speed

27PLCA 742167 115x22.23 120-M 10 4,000 rpm

742168 125x22.23 120-M 10 3,600 rpm

Premium comBi for steel & stainless steel


28A 707161* 125x22.23 CA80-B 10

707163* 125x22.23 CA120-B 10

707165* 178x22.23 CA40-B 10

707166* 178x22.23 CA60-B 10

707167* 178x22.23 CA80-B 10

707168* 178x22.23 CA120-B 10

19standard 2in1

sTandaRd 2in1


27A 843806 100x16 ZA40-B 10

455324 100x16 ZA60-B 10

455318* 100x16 ZA80-B 10

257768* 100x16 ZA120-B 10

572473 115x22.23 ZA40-B 10

454393 115x22.23 ZA60-B 10

455312 115x22.23 ZA80-B 10

50801 115x22.23 ZA120-B 10

824385 125x22.23 ZA40-B 10

455303 125x22.23 ZA60-B 10

458587 125x22.23 ZA80-B 10

243069 125x22.23 ZA120-B 10

139648 150x22.23 ZA40-B 10

139651 150x22.23 ZA60-B 10

139653 150x22.23 ZA80-B 10

575635* 150x22.23 ZA120-B 10

580650 178x22.23 ZA40-B 10

454396 178x22.23 ZA60-B 10

455314 178x22.23 ZA80-B 10

243071 178x22.23 ZA120-B 10

+ Large selection: The Standard** flap disc is available in all current dia-meters and grain sizes.

+ Universal use: Achieves very good results both on steel and stainless steel.

The STAnDARD** 2in1 flap disc offers two advantages. On the one hand, it offers the user a very good

lifetime, on the other hand it guar-antees a very good specific stock removal. The TYROLIT 2in1 flap disc

is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels.

sTandaRd 2in1

+ Ease of use: Effortless machining of welding seams as well as edge grinding and surface grinding.

20standard minidisc for steel & stainless steel 20

sTandaRd 2in1


28A 537021 115x22.23 ZA40-B 10

537084 115x22.23 ZA60-B 10

537089 115x22.23 ZA80-B 10

537093 115x22.23 ZA120-B 10

537095 125x22.23 ZA40-B 10

537097 125x22.23 ZA60-B 10

537110 125x22.23 ZA80-B 10

537111 125x22.23 ZA120-B 10

537112 178x22.23 ZA40-B 10

537113 178x22.23 ZA60-B 10

537114 178x22.23 ZA80-B 10

537115 178x22.23 ZA120-B 10

28n 847917 115x22.23 ZA40-B 10

847924 115x22.23 ZA60-B 10

847927* 115x22.23 ZA80-B 10

247165* 115x22.23 ZA120-B 10

847921 125x22.23 ZA40-B 10

847925 125x22.23 ZA60-B 10

847928 125x22.23 ZA80-B 10

247366* 125x22.23 ZA120-B 10

847923 178x22.23 ZA40-B 10

847926* 178x22.23 ZA60-B 10

847929* 178x22.23 ZA80-B 10

247175* 178x22.23 ZA120-B 10

* Delivery period 6 weeks/minimum batch size of 480 pieces

The STAnDARD** Minidisc was specially developed for machining

and refining difficult to access places. Every disc is fitted with a quick

fixing system which enables fast and convenient disc changes.

sTandaRd minidisc for steel & stainless steel

21


standard softjoB for steel and stainless steel

sTandaRd minidisc for steel and stainless steel


28M 679662 50xR ZA40-B 10

666221 50xR ZA60-B 10

679663 50xR ZA80-B 10

679664* 50xR ZA120-B 10

666276 75xR ZA40-B 10

666279 75xR ZA60-B 10

666280 75xR ZA80-B 10

666421* 75xR ZA120-B 10

100AxLS

257266 1

For us, the STAnDARD** Softjob flap disc represents maximum flexibili-ty for machining difficult to access areas. It has a broad application area,

comprising: surface premachining and improvement, preparation for welding works, cleaning of welding seams, machining of contours and

profiled surfaces, machining of rail-ings and pipes, cleaning of surfaces, removing rust and paint residues.

sTandaRd softjoB for steel & stainless steel

+ Universal use: The STAnDARD** Softjob is a 2in1 flap disc and thus equally suitable for steel and stainless steel.

+ Consistent performance: The disc offers uniform grinding properties over the entire lifetime.

+ Saves working time: The high flexibility of the Standard** SOFTJOB makes it possible to work on difficult to access places without having to change the tool.

22Basic 2in1 for steel and stainless steel

sTandaRd softjoB for steel and stainless steel


28S 246982 50xR ZA40-B 10

246984 50xR ZA60-B 10

246985 50xR ZA80-B 10

246986 50xR ZA120-B 10

289327 75xR ZA40-B 10

289329 75xR ZA60-B 10

289330 75xR ZA80-B 10

246987 115x22.23 ZA40-B 10

246988 115x22.23 ZA60-B 10

246990 115x22.23 ZA80-B 10

246994 115x22.23 ZA120-B 10

246995 125x22.23 ZA40-B 10

246996 125x22.23 ZA60-B 10

246998 125x22.23 ZA80-B 10

247001 125x22.23 ZA120-B 10

100 AxLS

257266 1

The 50 and 75 mm diameters are fitted with a quick fixing system

+ Large selection: The Basic* flap disc is available in all current diameters and grain sizes.

+ Universal use: Achieves good results both on steel and stainless steel.

The BASIC* 2in1 flap disc offers two advantages. On the one hand, it offers the user a good lifetime, on

the other hand it guarantees a good specific stock removal. The TYROLIT 2in1 flap disc is used both on high

alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels.

BasIc 2in1 for steel & stainless steel

+ Ease of use: Effortless machining of welding seams, as well as edge grinding and surface grinding.

23Basic 2in1 for steel and stainless steel 23

BasIc 2in1 for steel and stainless steel


27A 474872 100x16 ZA40-B 10

474874 100x16 ZA60-B 10

474875 100x16 ZA80-B 10

474877 100x16 ZA120-B 10

273884 115x22.23 ZA40-B 10

273810 115x22.23 ZA60-B 10

273871 115x22.23 ZA80-B 10

719788* 115x22.23 ZA120-B 10

273872 125x22.23 ZA40-B 10

273873 125x22.23 ZA60-B 10

273874 125x22.23 ZA80-B 10

719793 125x22.23 ZA120-B 10

28A 34023527 100 x 16 ZA40-B 10

34023528 100 x 16 ZA60-B 10

34023529 100 x 16 ZA80-B 10

34023530 100 x 16 ZA120-B 10

320318 115x22.23 ZA40-B 10

320320 115x22.23 ZA60-B 10

320322 115x22.23 ZA80-B 10

719794 115x22.23 ZA120-B 10

320319 125x22.23 ZA40-B 10

320321 125x22.23 ZA60-B 10

320323 125x22.23 ZA80-B 10

719796 125x22.23 ZA120-B 10

28n 246870 115x22.23 ZA40-B 10

246871 115x22.23 ZA60-B 10

246872 115x22.23 ZA80-B 10

728649 115x22.23 ZA120-B 10

728650* 125x22.23 ZA40-B 10

728657* 125x22.23 ZA60-B 10

728659* 125x22.23 ZA80-B 10

728661* 125x22.23 ZA120-B 10


www.tyrolit.com

TYROLIT SCHLEIfMITTELwERkE SwAROVSkI k.G. Swarovskistraße 33 | 6130 Schwaz | Austria Tel +43 5242 606-0 | Fax +43 5242 63398

Our worldwide subsidiary companies can be found on our website at www.tyrolit.com

2004

8864

-GB

-041

4

TYROLIT fLap dIsc Range · TYROLIT fLap dIsc Range Perfect solutions for every aPPlication A...

Documents

Transcript of TYROLIT fLap dIsc Range · TYROLIT fLap dIsc Range Perfect solutions for every aPPlication A...