Typical Sizing 95H N2
-
Upload
vivek-chudasama -
Category
Documents
-
view
14 -
download
9
description
Transcript of Typical Sizing 95H N2
-
N:
SHEET
JOB
REA
TITLE
CORPORATE NAME:
DRESSER RAND COMPANY
No PURCHASER'S (PO):
Rev
0 ORIGINAL ISSUE - FOR COMMENTS
A CERTIFIED
DATE
DESIGN
EXECUTION
CHECK
APPROVAL
I-MC-5400.00-2600-832-DRD-122
CLIENT AB-PGI/COMPERJ 1 OF 7
U-2600 - UNIDADE DE HIDROTRATAMENTO DE QUEROSENENI-RM-6000.67-2600-322-CHZ-001=B
ENGENHARIAC-2600003 A/B IDS: Self Regulating Pressure Control Valve calculations CORPORATIVA
IECOMPERJ / IEDCO
CALCULATION NOTES
COMPLEXO PETROQUIMICO DO RIO DE JANEIRO
No DRESSER DOCUMENT: RESPONSIBLE:
I-MC-5400.00-2600-832-DRD-122_A.doc Bhavesh Shah
No DRESSER REFERENCE: REG. CREAPO-4503695635 X-46053 -
INDEX OF REVISION
DESCRIPTION AND / OR REVISED SHEET
REV. 0 REV. A
10-Mar-11 23-May-11
DRD DRD
MANISH MANISH
VASANT VASANT
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PETROBRAS PROPERTY AND MAY NOT BE USED FOR PURPOSES OTHER THAN THOSE SPECIFICALLY INDICATED HEREIN.
THIS FORM IS PART OF STANDARD PETROBRAS N-381 REV.G ENGLISH ANNEX A- FIGURE A-1.
BHAVESH BHAVESH
mariana.davidNovo carimbo
-
DIRECT OPERATED REGULATOR SPECIFICATION
Item: 001 Rev: Qty: 2 Revised:Tag: PCV-26002302/PCV-26002402
03 MAY 11Project: COMPERJ Rev: ACustomer: Dresser RaData Sheet: F.S. Number: FS95H-187
Application: Pressure ReducingSize and Type: 1/2 Inch 95HSize and Type:Size and Type:
Body Style GlobeEnd Connect: 150 RFEnd Connect: 150 RFEnd Connect: 150 RFEnd Connect: 150 RFMaterial: SS 316Material: SS 316Material: SS 316Material: SS 316Body Tapping(1/8" inlet/outlet): STD
TrimMaterial: SS 316Orifice Size: 3/8 INCHOrifice Size: 3/8 INCHOrifice Size: 3/8 INCHDisk/Seat Material: SS 316Disk/Seat Material: SS 316Disk/Seat Material: SS 316
Actuator:Main Spring #: 1D7455T0012 GREENSpring Range: (Spring Range:Spring Range:Spring Range:Spring Range: (Spring Range: (Spring Range:Spring Range:Spring Range: (Spring Range: (Spring Range: (1.757-5.273) Kgf/Cm2 gSet Pressure: 2.2 Kgf/Cm2 gActuator Matl
Lower Casing(Dia. Case): -Upper Casing(Spring Case): SS 316
Spring Case Vent Tapped: NOPressure Registration
Internal: YESExternal: NO
Diaphragm Matl: 302 SSTDiaphragm Matl: 302 SSTDiaphragm Protector: NA
Filter:Filter Material: NAInternal Relief: NABugproof Vent: STDPressure Gauge: NAVent Position: STD
Process DataFlowing Media: NITROGENSpecific Gravity: 0.971Temperature: 40 DEG CVapor Pressure:Inlet Pressure: (8.3-8.5) Kgf/Cm2 gOutlet Pressure: 2.2 Kgf/Cm2 gDifferential Pressure: ( 6.1-6.3) Kgf/Cm2 gSet Pressure: 2.2 Kgf/Cm2 gCritical Pressure:Density:Molecular Weight: 28.129Flow Rate: (4.5-6) Nm3/hLine Size/Sched No:
Inlet: 1" SCH STDOutlet: 1" SCH STD
Max. Pressure RatingInlet: 21.092 Kgf/Cm2 gOutlet: 21.092 Kgf/Cm2 g
Approx. Shipping Weight (each): -
SizingRequired Flow Coefficient: 0.0550 CvRecovery Coefficient:
Km: 0.71C1: 35
Available Flow Coefficient: 0.517 CvWide Open Flow Coefficient: 1.9 Cv
Minimum Normal MaximumInlet Pressure (P1) kg/cm2g 8.299 8.499Outlet Pressure (P2) kg/cm2g 2.200 2.200Temperature (T) deg C 30.000 40.000Gas Flow Rate (Q) Nm3/h 4.499 5.999Sizing Coefficient, Cv (Cv) 0.0414 0.0550Valve/Reg LpA (SPL) (Valve/Reg LpA) dB(A) < 50 < 50
NOTES:1/2" Valve is more than sufficient forgiven process parametersLeakage Class Achieved is Class IVsince the Seat Material is of MetalThe Point No.43 - Type of Trim shallbe Top Guided
1.0y 11 MAY 11
Nikhil.NigoskarSheet 2 of 7
-
SIZING CALCULATION
Contact: Mr.Vasant Nadpara
Customer: Dresser Rand India Pvt. Ltd. Project: COMPERJ Rev: A Date: 03 MAY 11Loc: Ahmedabad
1.0y 11 MAY 11
Item: 001 - VALVE/REGULATOR SIZING CALCULATION: ISA/EN Gas
Item Desc:
Tags: PCV-26002302/PCV-26002402
SERVICE & SIZING
Gas NameInlet Pressure (kg/cm2g)Pressure Drop (kg/cm2)dP/P1 RatioAtm. Pressure (psia)
Critical Temperature (deg C)Critical Pressure (kg/cm2a)Molecular Weight (M)Specific Heat Ratio Factor, FkTemperature (deg C)Gas Flow Rate (Nm3/h)Pressure Drop Ratio Factor, XtAdj Pres. Drop Ratio Factor, XtpExpansion Factor YGas Compressibility Factor, ZValve diameter d (in)Inlet Pipe Diameter, D1 (in)Outlet Pipe Diameter, D2 (in)Piping Correction Factor, Fp
Sizing Coefficient, CvdP Choked (kg/cm2)
NOISE CALCULATIONFisher Valve/Reg Trim TypeDownstream Pipe Size (in)Downstream Pipe ScheduleValve/Reg LpA (SPL) (dB(A))WARNING:
VELOCITYUpstream Area (in2)Downstream Area (in2)Sonic Velocity (m/s)Inlet MachInlet Velocity (m/s)Outlet MachOutlet Velocity (m/s)
Normal
NITROGEN8.2996.0990.653
14.696
-146.90034.61928.129
1.00030.000
4.4990.6000.6000.6660.9970.5000.5000.5001.000
0.04145.600
REGS STD1.000STD< 50
ACCEPTABLE
0.7850.785
354.2830.0010.3540.0031.062
Maximum
NITROGEN8.4996.2990.660
14.696
-146.90034.61928.129
1.00040.000
5.9990.6000.6000.6660.9970.5000.5000.5001.000
0.05505.720
REGS STD1.000STD< 50
ACCEPTABLE
0.7850.785
360.0790.0010.3590.0031.080
Nikhil.NigoskarSheet 3 of 7
-
178
356
1/4-18 NPTVENT CONNSEE NOTE 1
89
152
108
46
152
OPTIONALTEE HANDLE/HANDWHEEL(SIZE 1/2 HAS HANDWHEEL OPTION ONLY)
NOTE 1: TAPPED ONLY WHEN SPECIFIED
Fisher Controls
Purpose of drawing is for dimensional reference only.
Unit of Measure = mm, scale=none. Envelope Dimensions are +/- 6. Face to Face Tolerance per ANSI.
3/1/11 DIMENSIONS CERTIFIED CORRECT BY ___________ -ROSEMOUNTFISHER 2011 Fisher Controls Intl. Inc.
1/2 IN 95H RF
Total Calculated Assembly Weight: 5 kg
CUSTOMER: DRESSER RAND INDIA PVT.LIMITED
CUST REF #:
TAG NO: PCV-26002302/PCV-26002402
FISHER REF #:
ITEM NO: 001 REV: -1.2.35-1.184-738-0
Nikhil.NigoskarSheet 4 of 7
-
DIRECT OPERATED REGULATOR SPECIFICATION
Item: 002 Rev: Qty: 2 Revised:Tag: PCV - 26002301/PCV-26002401
03 MAY 11Project: COMPERJ Rev: ACustomer: Dresser RaData Sheet: F.S. Number: FS95L-140
Application: Pressure ReducingSize and Type: 3/4 Inch 95LSize and Type:Size and Type:
Body Style GlobeEnd Connect: 150 RFEnd Connect: 150 RFEnd Connect: 150 RFEnd Connect: 150 RFMaterial: SS 316Material: SS 316Material: SS 316Material: SS 316Body Tapping(1/8" inlet/outlet): STD
TrimMaterial: SS 316Orifice Size: 9/16 INCHOrifice Size: 9/16 INCHOrifice Size: 9/16 INCHDisk/Seat Material: SS 316Disk/Seat Material: SS 316Disk/Seat Material: SS 316
Actuator:Main Spring #: 1E398927022 YELLOWSpring Range: (Spring Range: (Spring Range: (Spring Range: (Spring Range: (Spring Range: (Spring Range: (Spring Range: (Spring Range: (0.1406-0.4218) Kgf/Cm2 gSpring Range: (Spring Range: (Set Pressure: 0.3 Kgf/Cm2 gActuator Matl
Lower Casing(Dia. Case): -Upper Casing(Spring Case): SS 316
Spring Case Vent Tapped: NOPressure Registration
Internal: YESExternal: NO
Diaphragm Matl: SS 302Diaphragm Matl: SS 302Diaphragm Protector: NA
Filter:Filter Material: NAInternal Relief: NABugproof Vent: STDPressure Gauge: NAVent Position: STD
Process DataFlowing Media: NITROGENSpecific Gravity: 0.971Temperature: 40 DEG CVapor Pressure:Inlet Pressure: (8.3-8.5) Kgf/Cm2 gOutlet Pressure: 0.3 Kgf/Cm2 gDifferential Pressure: (8-8.2) Kgf/Cm2 gSet Pressure: 0.3 Kgf/Cm2 gCritical Pressure:Density:Molecular Weight: 28.129Flow Rate: (1.5-6) Nm3/hLine Size/Sched No:
Inlet: 1" SCH STDOutlet: 1" SCH STD
Max. Pressure RatingInlet: 21.092 Kgf/Cm2 gOutlet: 8.79 Kgf/Cm2 g
Approx. Shipping Weight (each): -
SizingRequired Flow Coefficient: 0.0550 CvRecovery Coefficient:
Km: 0.67C1: 35
Available Flow Coefficient: 0.872 CvWide Open Flow Coefficient: 4.4 Cv
Minimum Normal MaximumInlet Pressure (P1) kg/cm2g 8.300 8.500Outlet Pressure (P2) kg/cm2g 0.300 0.300Temperature (T) deg C 30.000 40.000Gas Flow Rate (Q) Nm3/h 1.500 6.000Sizing Coefficient, Cv (Cv) 0.0138 0.0550Valve/Reg LpA (SPL) (Valve/Reg LpA) dB(A) < 50 < 50
NOTES:3/4" Valve is more than sufficient forgiven process parametersLeakage Class Achieved is Class IVsince the Seat Material is of MetalThe Point No.43 - Type of Trim shallbe Top Guided
1.0y 11 MAY 11
Nikhil.NigoskarSheet 5 of 7
-
SIZING CALCULATION
Contact: Mr.Vasant Nadpara
Customer: Dresser Rand India Pvt. Ltd. Project: COMPERJ Rev: A Date: 03 MAY 11Loc: Ahmedabad
1.0y 11 MAY 11
Item: 002 - VALVE/REGULATOR SIZING CALCULATION: ISA/EN Gas
Item Desc:
Tags: PCV - 26002301/PCV-26002401
SERVICE & SIZING
Gas NameInlet Pressure (kg/cm2g)Pressure Drop (kg/cm2)dP/P1 RatioAtm. Pressure (psia)
Critical Temperature (deg C)Critical Pressure (kg/cm2a)Molecular Weight (M)Specific Heat Ratio Factor, FkTemperature (deg C)Gas Flow Rate (Nm3/h)Pressure Drop Ratio Factor, XtAdj Pres. Drop Ratio Factor, XtpExpansion Factor YGas Compressibility Factor, ZValve diameter d (in)Inlet Pipe Diameter, D1 (in)Outlet Pipe Diameter, D2 (in)Piping Correction Factor, Fp
Sizing Coefficient, CvdP Choked (kg/cm2)
NOISE CALCULATIONFisher Valve/Reg Trim TypeDownstream Pipe Size (in)Downstream Pipe ScheduleValve/Reg LpA (SPL) (dB(A))WARNING:
VELOCITYUpstream Area (in2)Downstream Area (in2)Sonic Velocity (m/s)Inlet MachInlet Velocity (m/s)Outlet MachOutlet Velocity (m/s)
Normal
NITROGEN8.3008.0000.857
14.696
-146.90034.62028.130
1.00030.000
1.5000.6000.6000.6660.9970.7500.7500.7501.000
0.01385.600
REGS STD1.000STD< 50
ACCEPTABLE
0.7850.785
354.2830.0010.3540.0072.479
Maximum
NITROGEN8.5008.2000.860
14.696
-146.90034.62028.130
1.00040.000
6.0000.6000.6000.6660.9970.7500.7500.7501.000
0.05505.720
REGS STD1.000STD< 50
ACCEPTABLE
0.7850.785
360.0790.0010.3590.0072.520
Nikhil.NigoskarSheet 6 of 7
-
178
356
1/2-14 NPTVENT CONNSEE NOTE 1
127
232
259
57
232
OPTIONALTEE HANDLE/HANDWHEEL(SIZE 1/2 HAS HANDWHEEL OPTION ONLY)
NOTE 1: TAPPED ONLY WHEN SPECIFIED
Fisher Controls
Purpose of drawing is for dimensional reference only.
Unit of Measure = mm, scale=none. Envelope Dimensions are +/- 6. Face to Face Tolerance per ANSI.
3/1/11 DIMENSIONS CERTIFIED CORRECT BY ___________ -ROSEMOUNTFISHER 2011 Fisher Controls Intl. Inc.
3/4 IN 95L RF
Total Calculated Assembly Weight: 15 kg
CUSTOMER: DRESSER RAND INDIA PVT.LIMITED
CUST REF #:
TAG NO: PCV - 26002301/PCV-26002401
FISHER REF #:
ITEM NO: 002 REV: -1.2.35-1.184-802-0
Nikhil.NigoskarSheet 7 of 7
-
CLIENTDOCUMENT NO.DOCUMENT NAMEREVISION 0PAGE NO. PB COMMENTS D-R RESPONSE
Sheet No. 2 OF 7
SEE DATASHEET ( Max. Pressure Ratings Inlet & Outlet )
This is the Maximum Pressure the Inlet & Outlet flange can withstand. However all valvesare having 150# RF flange.
Sheet No. 4 OF 7
IT'S NOT NECESSARY IF PROVIDED WITH BY-PASS ( GAD )
The Diagram ( GAD) is for reference purpose only . The Regulator will be supplied withoutHandwheel. It is an optional iten only.
CLARIFICATION SHEET
I-MC-5400.00-2600-832-DRD-122C-2600003 A/B IDS:SELF ACTUATING PRESSURE CONTROL VALVE-SIZING CALCULATIONS
COMPERJ