Typical Configurations - IMRA America, Inc. · FEMTOLITE F/G/H Series IMRA America, Inc. 1044...
Transcript of Typical Configurations - IMRA America, Inc. · FEMTOLITE F/G/H Series IMRA America, Inc. 1044...
FEMTOLITE F/G/H Series
Applications• Multiphoton Fluorescence Microscopy
• Second Harmonic Imaging
• Terahertz Wave Generation/Detection
10-11-2019
Product Features
• Compact and robust design for easy integration
• Simple on/o� operation by control panel or RS-232 interface
• HX-150 model o�ers adjustable power at dual wavelengths
• Mechanical reliability complies with relevant MIL-STD-810F and IEC 60601-1 requirements
HX150 Laser HeadFX100 Complete SystemThe Femtosecond Fiber Laser Company
*At maximum setting
FX100 FX150
Wavelength
Average Power
Repetition Rate
Pulse Duration
805 nm
≤ 140 fs
≥ 150 mW≥ 100 mW
75 ± 10 MHz
≤ 120 fs
Typical Configurations
810 nm
Wavelength
Average Power
Repetition Rate
Pulse Duration
≥ 150 mW*
≤ 100 fs≤ 100 fs
≥ 200 mW
1620 nm 810 nm & 1620 nm
≤ 140 fs
≥ 200 mW*
75 ± 10 MHz
HX150GX200
FEMTOLITE F/G/H Series
IMRA America, Inc.1044 Woodridge Ave., Ann Arbor, MI 48105 Phone: 734.930.2560 Fax: 734.930.9957
[email protected] www.imra.com
43 mm
267 x 267 x 133 mm³
< 250 W
100-240 VAC at 50-60 Hz
Vertical with respect to baseplatePolarization
Output Aperture Height
230 x 193 x 76 mm³Laser Head Dimensions
Laser Head Weight
Controller Dimensions
3.5 kgController Weight
Power Consumption
Operating Voltage
Power Stability
0 - 50 ºC
2 m
20 - 30 ºCOperating Temperature
Storage Temperature
≤ 15 minutesWarm-up Time
Cable Length
F/G/H SpecificationsFX100(805 nm)
FX150(810 nm)
HX150(810 nm &1620 nm*)
GX200(1620 nm)
Horizontal*
≤ 1% RMS after stabilization at 25 ˚C
2 kg 3 kg 2 kg
Head Heat Dissipation < 50 W
*For HX150 at maximum setting only
FX100, FX150 Warning Label GX200 Warning Label HX150 Warning Label
NOTE: Specifications and features may change without notice