Types of Working Capital
Transcript of Types of Working Capital
-
8/6/2019 Types of Working Capital
1/44
Management of working capital
Guided by the above criteria, management will use a combination of policies and techniques for the
management of working capital.[16]
These policies aim at managing the current
assets(generally cash and cash equivalents, inventories and debtors) and the short term financing, suchthat cash flows and returns are acceptable.
Cash management. Identify the cash balance which allows for the business to meet day to day
expenses, but reduces cash holding costs.
Inventory management. Identify the level of inventory which allows for uninterrupted production but
reduces the investment in raw materials and minimizes reordering costs and hence increases
cash flow; see Supply chain management; Just In Time (JIT); Economic order
quantity (EOQ); Economic production quantity (EPQ).
Debtors management. Identify the appropriate credit policy, i.e. credit terms which will attract
customers, such that any impact on cash flows and the cash conversion cycle will be offset by
increased revenue and hence Return on Capital (orvice versa); see Discounts and allowances.
Short term financing. Identify the appropriate source of financing, given the cash conversion cycle:
the inventory is ideally financed by credit granted by the supplier; however, it may be necessary to
utilize a bank loan (or overdraft), or to "convert debtors to cash" through "factoring".
-
8/6/2019 Types of Working Capital
2/44
WORKING CAPITAL
1. Concept And Definition Of Working Capital
There are two concept of Working Capital : gross and
net .
a)The term gross working capital , also referred to as
working capital , means the total current assets .
-
8/6/2019 Types of Working Capital
3/44
b)The net working capital canbe defined in two ways
:
1. The most common definition of net working capital
( NWC ) is the differencebetween current assets and
current liabilities ; and
2. Alternate definition of NWC is that portion of
current assets which is financed with long term funds .
The task of financing manager in managing working
capital efficiently is to ensure sufficient liquidity in the
operations of the enterprise . Net working capital , as a
measure of liquidity is not very useful for comparing
the performance of different firms , but it is quite
-
8/6/2019 Types of Working Capital
4/44
useful for internal control . The NWC helps in
comparing the liquidity of the same firm over time . For
the purpose of working capital management , therefore
, NWC canbe said to measure the liquidity of the firm .
In the other words , the goal of working capital
management is to manage the current assets and
liabilities in such a way that an acceptable level of
NWC is maintained .
2. Components Of Working Capital
Thebasic components of working capital are ,
-
8/6/2019 Types of Working Capital
5/44
Current Assets :
a)Inventories
i) Raw Materials and Components
ii) Work in Progress
iii) Finished Goods
iv) Others
b)Trade Debtors
c)Loans And Advances
d)Investments
e)Cash And Bank Balance
Current Liabilities:
-
8/6/2019 Types of Working Capital
6/44
a)Sundry Creditors
b)Trade Advances
c)Borrowings
d)Commercial Banks
e)Provisions
3. Need For Working Capital
Given the objective of financial decision making to
maximise the shareholders wealth , it is necessary to
generate sufficient profits . The extent to which profits
-
8/6/2019 Types of Working Capital
7/44
canbe earned will naturally depend , among other
things , upon the magnitude of sales . A successful sales
program is , in other words , necessary for earning
profitsby anybusiness enterprise . However , sales do
not convert into cash instantly ; there is invariably a
time lagbetween sale of goods and the receipt of cash .
There is therefore , a need for working capital in the
form of current assets to deal with the problem arising
out of the lack of immediate realisation of cash against
goods sold . Therefore sufficient working capital is
necessary to sustain sales activity . Technically this is
referred to s operating cycle . The operating cycle canbe
-
8/6/2019 Types of Working Capital
8/44
said tobe at the heart of the need for the working
capital . In other words the operating cycle refers to the
length of time necessary to complete the following cycle
of events :
a)Conversion of cash into raw materials;
b)Conversion of raw materials to inventory ;
c)Conversion of inventory into receivables ;
d)Conversion of receivables into cash .
If it were possible to complete the sequences
instantaneously , there wouldbe no need for current
assets (working capital) . But since it is not possible ,
the firm is forced to have current assets . Since the cash
-
8/6/2019 Types of Working Capital
9/44
inflows and outflows do not match , firms have to
necessarily keep cash or invest in short term liquid
securities so that they willbe in position to meet
obligations when theybecome due . Similarly , firms
must have adequate inventory to guard against the
possibility of notbeing able to meet demand for their
products . Adequate inventory , therefore, provides a
cushion againstbeing out of stock . If firms have tobe
competitive , they must sell goods to their customer on
credit which necessitates the holding of accounts
receivables . It is in these ways that an adequate level
of working capital is absolutely necessary for smooth
-
8/6/2019 Types of Working Capital
10/44
sales activity which , in turn , enhances the owners
wealth .
4. Characteristics Of Current Assets
In management of working capital two characteristics
of current assets mustbeborne in mind : a) short life
span andb) swift transformation into other assets
forms .
Current assets may have a short life. Cashbalance may
be held idle for a week or two, account receivables may
have a life span of 30 to 60 days , and inventories may
be held for 30 days to 100 days . The life span of
-
8/6/2019 Types of Working Capital
11/44
current assets depend on the time required in the
activities of procurement , production , sales and
collection and the degree of synchronisation among
them .
Each current asset is swiftly transformed into other
assets forms : cash is used for acquiring raw materials ,
raw materials are transformed into finished goods ( this
transform may involve several stages of work in
progress ) ; finished goods , generally sold on credit , are
converted into accounts receivable , and finally account
receivables on reliasation , generate cash .
These two characteristics has certain implications ,
-
8/6/2019 Types of Working Capital
12/44
i) Decisions relating to working capital
management are repetitive and frequent
ii) The differencebetween profit and present value
is insignificant
iii) The close interaction among working capital
components implies that efficient management of
one component cannotbe undertaken without
simultaneous consideration of other components .
5. Factors Affecting Working Capital
-
8/6/2019 Types of Working Capital
13/44
The working capital needs of a firm are influencedby
numerous factors . The important ones are
i) Nature ofbusiness : The working capital
requirement of a firm is closely related to the
nature ofbusiness . A service firm , like
electricity undertaking or a transport corporation
which has a short operating cycle and which sells
predominantly on cashbasis , has a modest
working capital requirement . On the other hand
, manufacturing concern like a machine tools
unit , which has a long operating cycle and
-
8/6/2019 Types of Working Capital
14/44
which sells largely on credit has a very
substantial working capital requirement .
ii) Seasonality of Operation : Firms which have
marked seasonality in there operations usually
have highly fluctuating working capital
requirement . For example , consider a firm
manufacturing air conditioners . The sale of air
conditioners reaches the peak during summer
months and drops sharply during winter season .
The working capital need of such a firm is likely
to increase considerably in summer months and
decrease significantly during winter period . On
-
8/6/2019 Types of Working Capital
15/44
the other hand , a firm manufacturing consumer
goods like soaps , oil , tooth pastes etc. which
have fairly even sale round the year , tends to
have a stable working capital need .
iii) Production Policy : A firm markedby
pronounced seasonal fluctuation in its sale may
pursue a production policy which may reduce the
sharp variations in working capital requirements
. For example a manufacturer of air conditioners
may maintain steady production through out the
year rather than intensify the production
activity during the peakbusiness season . Such
-
8/6/2019 Types of Working Capital
16/44
decision may dampen the fluctuations in
working capital requirements .
iv) Market Conditions : When competition is keen ,
larger inventory of finished goods is required to
promptly serve the customers who may notbe
inclined to waitbecause other manufacturers are
ready to meet their needs . Further generous
credit terms may have tobe offered to attract
customers in highly competitive market . Thus ,
working capital needs tend tobe highbecause of
greater investment in finished goods inventory
and accounts receivable .
-
8/6/2019 Types of Working Capital
17/44
If the market is strong and competition is weak , a firm
can manage with smaller inventory of finished goods
because customers canbe served with delay . Further in
such situation the firm can insist on cash payment and
avoid lock up of funds in accounts receivables it can
even ask for advance payment , partial or total .
v) Conditions of Supply : The inventory of raw
material , spares and stores depends on the
conditions of supply . If supply is prompt and
adequate , the firm can manage with small
inventories . However if the supply is
unpredictable and scant then the firm , to ensure
-
8/6/2019 Types of Working Capital
18/44
continuity of production , would have to acquire
stocks as and when they are available and carry
large inventories on an average . A similar policy
may have tobe followed when the raw material
is available only seasonally and production
operations are carried out round the year .
6. Operating Cycle Analysis
The Operating cycle of the firmbegins with the
acquisition of raw materials and ends with the
collection of receivables . It maybe divided into four
-
8/6/2019 Types of Working Capital
19/44
stages a) raw material and stores storage stage , b)
work-in-progress stage , c) finished goods inventory
stage and d) debtors collection stage .
Duration of operating cycle : The duration of
operating cycle is equal to the sum of the duration of
-
8/6/2019 Types of Working Capital
20/44
each of these stages less the credit period allowedby the
suppliers to the firms . It canbe given as
O = R + W + F + D C
Where O = Duration of operating cycle
R = Raw material and stores storage period
W = Work-in-progress period
F = Finished goods storage period
D = debtors collection period
C = Creditors payment period
The components of Operating cycle maybe calculated
as follows ;
-
8/6/2019 Types of Working Capital
21/44
R = Average stock of raw materials and stores
Average raw material and stores consumption
per day
W = Average Work-in-progress inventory
Average cost of production per day
F = Average Finished Goods Inventory
Average cost of goods sold per day
D = Averagebooks debts
-
8/6/2019 Types of Working Capital
22/44
Average credit sales pert day
C = Average trade creditors
Average credit purchase
Types of working capital
The type, kinds of a thing are depending upon the different utilization of working capital.
It prominently works in the direction of performing different functions in different situation and
in the context of divergent variables. So following are some important types of working capital.
.
Net Working
Capital Gross Working
Capital
Permanent
Working capital
Temporary
Working Capital
Types of
Working Capital
Balance Sheet
Working Capital
Cash WorkingCapital
Negative
Working Capital
-
8/6/2019 Types of Working Capital
23/44
1) Net Working Capital:
Term Net working capital can be define in two way
i) It is the difference between current assets and current liabilities.
ii) Amount left for operational requirement.
2) Gross Working Capital:
Gross working capital means the total current assets.
3) Permanent Working Capital:
It is the minimum amount of the current assets, which are needs to conduct the business
even during the dullest season of the year. This amount varies from year to year depending
upon the growth of a company and stage of the business cycle in which it operates. It is the
amount of funds required to produce the goods and services, which are necessary to satisfy
demand at a particular point.
It represents the current assets, which are required on a continuing basis over the year. It is
maintain as the medium to carry on operation at any time. Permanent working capital has
following features:
i) It is classified on the basis of the time factor.
ii) Its size increase with the growth of the business.
iii) It constantly shifted from one assets o another and continues to remain in the
business process.
4) Temporary Working Capital:
It represents the additional assets, which are required at different times during the
operating year. Seasonal working capital is the additional amount of current assets
particularly cash, receivables, and inventory which is required during the more active
-
8/6/2019 Types of Working Capital
24/44
business seasons of the year. It is the temporary investment in the current assets and
possesses he following features:
a) It is not always gainfully employed, though is May also shift from one
asset to another as permanent working capital does.
b) It is particularly suited to business of seasonal on cyclical nature.
5) Balance Sheet Working Capital:
The balance sheet working capital is one, which is calculated from the items appearing in
the balance sheet. Gross working capital, which is represented by the excess of current assets
over current liabilities, is example of the balance sheet working capital.
6) Cash Working Capital:
It is one, which is calculated from the items appearing in he Profit and Loss Account. It
shows the real flow of money or value at a particular time and considered to be most realistic
approach in working capital management. It is the basic of he operation cycle concept, which
has assumed a great importance in financial management in recent year. The reason is that
the cash working capital indicates he adequacy of he cash flow which is an essential pre
requisite of a business.
7) Negative Working Capital:
It emerges when current liabilities exceeds current assets, such a situation is absolutely
theoretical and occurs when a firm is nearing a crisis of some magnitude.
-
8/6/2019 Types of Working Capital
25/44
Principles of Working Capital Management:
There are some principles of sound working capital management policy. They are as
follows:
1) Principle of Risk Variation:
Risk here refers to inability of a firm to meet its obligation when they become due for
payment. Large investment in current assets with less dependence on a short term borrowing
increase liquidity, reduces dependence on short term borrowing increases liquidity, reduces risk.
On the other hand less investment in current assets and greater dependence on debt
increase the risk, reduces liquidity and increases profitability. In other word these is a definite
inverse relationship between he degree of risk and profitability.
A conservative management prefers to minimize risk by maintaining a higher level of current
assets or working capital while a liberal management should be to establish a suitable trade off
between profitability and risk.
2) Principle of Cost of Capital:
The various sources of rising of working capital finance have different cost of capital and
the degree of risk involved. Generally higher the risk lower is the cost and lower the risk higher
is the cost. A sound working capital management should always try to achieve a proper balance
between these two.
3) Principle of Equity position:
According this principle, the amount of working capital invested in each component
should be adequately justified by a firms equity position. Every rupee invested in the current
assets should contribute to he net worth of he firm.
4) Principle of Maturity of Payment:
-
8/6/2019 Types of Working Capital
26/44
This principle is concerned with planning he sources of finance for working capital.
According to this principle, a firm should make every efforts o related maturity of payment to its
flow of internally generated funds. Maturity pattern of various current obligations is an impotent
factor in risk assumptions and risk assessment.
Factors determining working capital
1) Nature or character of Business:
The working capital requirement of a firm basically depends upon he nature of its
business. Public utility undertaking like Electricity, Water Supply, and Railways need very
limited working capital because they offer cash sales only and supply services, not products and
as such no funds are tied up in inventories and receivables.
On the other hand trading and financial firms require less investment in fixed assets but they
have to invest large amount in current assets like inventories, receivables and cash. So they need
large amount of working capital.
2) Production cycle:
Another factor, which has a bearing on the quantum of working capital, is the production
cycle. The term production or manufacturing cycle refers to the time involved in the
manufacturing of goods. It covers the time span between the procurement of raw material and the
completion of the manufacturing process leading to the production of finished goods.
In other words, there is sometime gap before raw material becomes finished goods. To
sustain such activities that need for working capital is obvious. The longer time span (production
cycle) the large will be the tied up funds and therefore, larger is working capital need and vise
versa.
-
8/6/2019 Types of Working Capital
27/44
3) Production Policy:
In certain industry the demand is subject to wide fluctuations due to seasonal variations.
The requirement of working capital in such case, depend upon the production policy. The
production can be either kept steady by accumulating inventories during slack period with a view
to meet high demand during peak season of the production could be curtailed during the slack
season and increased during the peak season. If policy is to keep production steady by
accumulating inventories it will require higher working capital.
4) Credit Policy:
The credit terms granted to customers have a bearing in the magnitude of working capital
by determining the level of book debts. The credit sales result in higher book debs. Higher book
debts mean more working capital. On the other hand, if liberal credit terms are available from the
supplies of goods trade needs less working capital.
The working capital requirement of a business are thus, affected by term of purchase and
sale, and the ole given to credit by a company in its dealing with creditors and debtors.
5) Growth and Expansion:
The working capital requirement of concern increase with the growth and expansion of
its business activities. Although, It is difficult to determine the relationship between the growth
in the volume of business and the growth in the working capital of a business, yet it may be
concluded that for normal rate of expansion in the volume of business. We may have retained
profits to provide for me working capital but in fast growing concern, we shall require lager
amount of working capital.
6) Seasonal Variation:
-
8/6/2019 Types of Working Capital
28/44
In certain industry raw material is no available throughout the year. They have to buy raw
material in bulk during the season to ensure uninterrupted flow and process them during the
entire year. So a huge amount is blocked in form of row material during the peak season, which
gives more requirements for working capital and less requirement during the slack season.
7) Earning Capacity:
Some firm have more earning capacity than others due to quality of the products,
monopoly condition etc. Such firms with high earning capacity may generate cash profits from
operations and contribute to their working capital.
8) Dividend Policy:
The dividend policy of a concern influence on the requirement of the working capital. A
firm that maintains a steady high rate of cash dividend irrespective of its profits level needs more
working capital than the firm that retains large part of its profits and does not pay at high rate of
cash dividend.
9) Other Factors:
Certain other factors such as operating efficiency, management ability, irregularities in
supply, import policy, assets structure, importance of labour, banking facilities etc, also influence
the requirement of working capital.
Sources of Working Capital
Mainly there are two sources of working capital:
i. Permanent or Fixed working capital
ii. Temporary or variables working capital
-
8/6/2019 Types of Working Capital
29/44
In any concern, a part of the working capital investments are as investment in fixed
assets. This is so because there is always a minimum level of current assets, which are copiously
required by the enterprise to carry out its day-to-day business operation and this minimum,
cannot be expected to reduce at any time. This minimum level of current assets need long term
working capital, which is permanently blocked.
Similarly, some amount of working capital may be required to meet the seasonal demands and
some special exigencies such as rise in prices, strikes, etc. this gives rise to short term working
capital which is required for day to day transaction also.
The fixed proportion of working capital should be generally financed from the fixed capital
sources while the temporary or variable working capital equipment may be met from the short
term sources of capital.
Methods of Calculation of Required Working Capital
The methods of calculation of required working capital are as follows:
Sources of Working Capital
Long term Sources
1) Shares
2) Debentures
3) Public Deposits
4) Ploughing back of Profits
5) Loans from Financial
institution
Short Term sources
1) Commercial Banks
2) Indigenous Banks
3) Trade Creditors
4) Installment Credit
5) Advances
6) Account receivable
7) Credit
8) Accrued Expenses
9) Differed Income
10 Commercial Pa er
-
8/6/2019 Types of Working Capital
30/44
Working Capital Cycle:
The working capital cycle is also known as operating cycle. It refers to the duration
between the firms payment of cash for raw material, entering into production and inflow of
cash from debtors and realization of receivables. Simply speaking, operating cycle is the
duration between the outflow of cash and inflow of cash and this may be evidenced from the
following working capital cycle.
The above and network diagram may offer a clear picture of a complete working capital
i.e. it is a cash phenomenon. In the diagram, raw material, stock refers to material only. In work
in process, components involve are raw material, wages, and overhead more specifically
manufacturing overheads. Finished stock consists components of material, wages and overheads
inclusive of factory, office and administration and selling and distribution. Debtors include
material, wages, overheads and profits. Credit involves for the components of raw material, etc.
something a contingency margin is also given while estimating the working capital requirement.
The operating cycle consists of him following events, which continues throughout his life
of a firm remaining engaged in commercial activities.
Receivables
Finished Goods
Raw Material Work In Process
Cash
-
8/6/2019 Types of Working Capital
31/44
Avg. Stock of Raw Material
1) Raw Material Holding Period =Avg. Cost of Consumption per day
Avg. Stock of Work in Process2) Work in Process Holding Period =Avg. Cost of Production per day
Avg. Stock of Finished Goods
3) Finished Goods Holding Period =Avg. Cost of Goods Sold per day
Avg. Book Debt
4) Receivables Collection Period =Avg. Credit Sales per day
Avg. Trade Creditors
5) Creditors Collection Period =Avg. Credit Purchased per day
In the form of a simple equation working capital cycle or operating cycle can be
represented as bellow:
O = R+W+F+D-C
Where, O = Operating Cycle (In Days)
R = Raw Materials Holding PeriodW = Work in Process Holding Period
F = Finished Goods Holding PeriodD = Receivables Collection Period
C = Creditors Collection Period.
Total Operating Cost
Working Capital Required =Number of Operating Cycle
-
8/6/2019 Types of Working Capital
32/44
Components of Working Capital:
CurrentAssets:
i) Stock of Raw Material (formonth consumption)
ii) Work In Process (forMonth)a) Raw Materials
b) Direct Labourc) Overheads
iii) Stock of Finished Goods (formonth sales)
iv) Sundry Debtors or Receivables (formonth sales)
v) Payments in Advance (if any)
vi) Balance of Cash (required to meet day-to-day Expenses)
vii) Any Other (if any)
Less: CurrentLiabilities:
i) Creditors (formonth purchase of raw materials)
ii) Outstanding Expenses (for month)
iii) Others (if any)
Working Capital (CA CL)
Add: Provision/ Margin for contingencies
Net Working Capital Required
Amount
------
------
------
------
------
------
------
------
------
------
---------
------
----------
-
8/6/2019 Types of Working Capital
33/44
Management of working capital:
Working capital, in general practice, refers to him excess of current assets over current
liabilities. Management of working capital therefore, is concerned with problems that arise in
attempting to mange him current assets, current liabilities, and interrelationship that exists
between them. In other word it refers to all aspects of administration of both current assets and
current liabilities.
The basic goal of working capital management is to manage the current assets and current
liabilities of a firm in such way that a satisfactory level of working capital is maintained, i.e.
neither inadequate nor excessive. This is so because both inadequate as well as excessive
working capital position is bad for the business. Inadequacy of working capital, may lead the
firm insolvency and excessive working capital implies idle funds, which earn no profit for the
business. Working capital management policies of the firm have a great effect on its profitability,
liquidity and structural health of the organization. In this context, working capital management is
three-dimensional nature:
1) Dimension I is concerned with the formulation of he policy with regard to
Profitability, risk and liquidity.
2) Dimension II is concerned with the decision about his composition and level of current
assets.
-
8/6/2019 Types of Working Capital
34/44
3) Dimension III is concerned with the decision about his composition and level of current
liabilities.
This dimension aspect of his working capital has been more clearly and precisely
Explains by the following diagram.
Profitability, Risk & Liquidity
Dimension I
Dimension III Dimension
II
Composition& Level of current assets
Composition & levelOf current Liabilities
Evaluation of working capital
-
8/6/2019 Types of Working Capital
35/44
The working capital management needs attention of all the finance head/ working capital
management is important for avoiding unnecessary blockage of fund. Like that liquidity is
important at it refer to the short-term financial strength of company.
It is very important to have proper balance in regard to the liquidity of the firm.
FFFIIINNNAAANNNCCCIIINNNGGGWWWOOORRRKKKIIINNNGGGCCCAAAPPPIIITTTAAALLL
After determining the level of Working Capital, the firm has to decide how it is to be financed. The
need for finance arises mainly because the investment in working capital/current assets, that is,
raw material, work-in-progress, finished goods and receivables typically fluctuates during the year.
Although long-term funds partly finance current assets and provide the margin money for working
capital, such working capitals are virtually exclusively supported by short term sources. The main
sources of working capital financing are namely, Trade credits, Bank credits and commercial
bankers.
1. Trade Credit
Trade credit refers to the credit extended by the supplier of goods and services in the normal
course of business of the firm. According to trade practices, cash is not paid immediately for
purchases but after an agreed period of time. Thus, trade credit represents a source of finance for
credit purchases.
There is no formal/specific negotiation for trade credit. It is an informal agreement between the
buyer and the seller. Such credit appears in the books of buyer as sundry creditors/accounts
payable. The most of the trade credit is on open account as accounts payable, the supplier of
goods does not extend credits indiscriminately. Their decision as well as the quantum is based
on a consideration of factors such as earnings record over a period of time, liquidity position of
the firm and past record of payment.
AAddvvaannttaaggeess
i) It is easily, almost automatically available.
ii) It is flexible and spontaneous source of finance.
-
8/6/2019 Types of Working Capital
36/44
iii) The availability and the magnitude of trade credit is related to the size of operation of
the firm in terms of sales/purchases.
iv) It is also an informal, spontaneous source of finance.
v) Trade credit is free from restrictions associated with formal/negotiated source of
finance/credit.
2. Bank Credit
Bank credit is primarily institutional source of working capital finance in India. In fact, it
represents the most important source for financing of current assets. Working Capital finance is
provided by banks in five ways :
(a) Cash Credit / Overdrafts : Under cash credit/ overdraft agreement of bank
finance, the bank specifies a predetermine borrowing/credit limit. The burrower
can burrow upto the stipulated credit. Within the specified limit, any number of
drawings are possible to the extent of his requirements periodically. Similarly,
repayment can be made whenever desired during the period. The interest is
determined on the basis of the running balance/amount actually utilized by the
burrower and not on the sanctioned limit. However, a minimum charge may be
payable on the unutilized balance irrespective of the level of borrowing for availing
of the facility. This type of financing is highly attractive to the burrowers because,
firstly, it is flexible in that although borrowed funds are repayable on demand, and,
secondly, the burrower has the freedom to draw the amount in advance as an
when required while the interest liability is only on the amount actually
outstanding. However, cash credit/overdraft is inconvenient to the banks and
hampers credit planning. It was the most popular method of bank financing of
working capital in India till the early nineties. With the emergence of the new
banking since mid-nineties, cash credit cannot at present exceed 20% of the
maximum permissible bank finance (MPBF)/credit limit to any borrower.
(b) Loans : under this arrangement, the entire amount of borrowing is credited to the
current account of the borrower or released in cash. The borrower has to pay
interest on the total amount. The loans are repayable on demand or in periodic
installments. They can also be renewed from time to time. As a form of financing,
loans imply a financial discipline on the part of the borrowers. From a modest
-
8/6/2019 Types of Working Capital
37/44
beginning in the early nineties, at least 80% of MPBF must be in form of loans in
India.
(c) Bills Purchased/Discounted : This arrangement is of relatively recent origin in
India. With introduction of the New Bill Market Scheme in 1970 by RBI, bank credit
is being made available through discounting of usance bills by banks. The RBI
envisaged the progressive use of bills as an instrument of credit as against the
prevailing practice of using the widely-prevalent cash credit arrangement for
financing working capital. The cash credit arrangement gave rise to unhealthy
practices. As the availability of bank credit was unrelated to production needs,
borrower enjoyed facilities in excess of their legitimate needs. Moreover, it led to
double financing. This was possible because credit was taken form different
agencies for financing the same activity. This was done, for example, by buying
goods on credit from suppliers and raising cash credit b hypothecating the same
goods. The bill financing is intended to link credit with sale and purchase of goods
and, thus eliminate the scope for misuse or diversion of credit to other
purposes.Before discounting he bill, the bank satisfies itself about the credit
worthiness of the drawer and the genuineness of the bill. To popularize the
scheme, the discount rates are fixed at lower rates than those of cash credit. The
discounting banker asks the drawer of the bill to have his bill accepted by the
drawee bank before discounting it. The later grants acceptance against the cash
credit limit, earlier fixed by it, on the basis of the borrowing value of stocks.
Therefore, the buyer who buys goods on credit cannot use the same goods as a
source of obtaining additional bank credit.
-
8/6/2019 Types of Working Capital
38/44
The modus operandi of bill finance as a source of working capital financing is that a
bill that arises out of a trade sale-purchase transaction on credit. The seller of goods
draws the bill on the purchaser of goods, payable on demand or after a usance period
not exceeding 90 days. On acceptance of the bill by the purchaser, the seller offers it to
the bank for discount/purchase. On discounting the bill, the bank releases the funds to
the seller. The bill is presented by the bank to the purchaser/acceptor of the bill on
due date for payment. The bills can be rediscounted with the other banks/RBI.
However, this form of financing is not popular in the country.
d) Term Loans for Working Capital : Under this arrangement, banks advance loans for 3-
7 years payable in yearly or half-yearly installments.
e) Letter ofCredit : While the other forms of bank credit are direct forms of financing
in which banks provide funds as well as bear risk, letter of credit is an indirect formof working capital financing and banks assume only the risk, the credit being
provided by the suppliers himself.
The purchaser of goods on credit obtains a letter of credit from a bank. The bank
undertakes the responsibility to make payment to the supplier in case the buyer
fails to meet his obligations. Thus , the modus operandi of letter of credit is that the
supplier sells goods on credit/extends credit to the purchaser, the bank gives a
guarantee and bears risk only in case of default by the purchaser.
3. Mode ofSecurity
a) Hypothecation : Under this mode of security, the banks provide credit to borrowers
against the security of movable property, usually inventory of goods. The goods
hypothecated, however, continue to be in the possession of the owner of these goods
(i.e. the borrower ). The rights of the lending bank (hypothecate) depend upon the terms
of the contract between the borrower and the lender. Although the bank does not have
physical possession of the goods, it has the legal right to sell the goods to realize the
outstanding loan. Hypothecation facility is normally is not available to new borrowers.
b) Pledge : Pledge, as a mode of security, is different from hypothecation in that in the
former, unlike in the later, the goods which are offered as security are transferred to the
physical possession of the lender. An, essential perquisite of pledge, therefore, is that
the goods are in the custody of the bank. The borrower who offer the security is, called a
-
8/6/2019 Types of Working Capital
39/44
pawnor (pledgor), while the bank is called the pawnee (pledgee). The lodging of goods
by the pledgor to the pledgee is a kind of bailment. Therefore, pledge creates some
liabilities for the bank. It must take reasonable care of goods pledged with it. In case of
non-payment of the loans, the bank enjoys the right to sell the goods.
c) Lien : The term lien refers to the right of a part to retain goods belonging to another
party until a debt due to him is paid. Lien can be of two types: (i) particular lien, and (ii)
general lien. Particular lien is a right to retain goods until a claim pertaining to theses
goods is fully paid. On the other hand, general lien can be applied till all dues of the
claimant are paid. Banks usually enjoy general lien.
d) Mortgage : It is the transfer of a legal/equitable interest in specific immovable property
for securing the payment of debt. The person who parts with the interest in the property
is called mortgagor and the bank in whose favour the transfer takes place is the
mortagagee. The instrument of transfer is called the mortgage deed. Mortgage is, thus,
conveyance of interest in the mortgaged property. The mortgage interest in the property
is terminated as soon as the debt is paid. Mortgage are taken as an additional security
for working capital credit b banks.
e) Charge : Where immovable property of one person is, by the act of parties or by the
operation of law, made security for the payment of money to another and the transaction
does not amount to mortgage, the latter person is said to have a charge on the property
and all the provisions of simple mortgage will apply to such a charge. The provision are
as follows:
y A charge is not the transfer of interest in the property though it is security for
payment. But mortgage is a transfer of interest in the property.
y A charge may be created by the act of parties or by the operation of law. But a
mortgage can be created only by the act of parties.
y A charge need not be made in writing but a mortgage deed must be attested.
y Generally, a charge cannot be enforced against the transferee for
consideration without notice. In a mortgage, the transferee of the mortgage
property can acquire the remaining interest in the property, if any is left.
4. Reserve Bank ofIndia Framework for Regulation of Bank Credit
After mid-nineties, the framework for regulation of bank credits has been relaxed
permitting banks greater flexibility in tune with the emergence of new banking in the
-
8/6/2019 Types of Working Capital
40/44
country, focusing on viability and profitability in contrast to the earlier thrust on
social/development banking. The notable features of the framework/regulation related to
fixation of norms for bank lending to industry. The norms are:
a) Inventory and Receivable Norms : The norms refer to the maximum level for holding
inventories and receivables in each industry. Raw materials were expressed as so many
months consumptions; WIP as so many months cost of production; finished goods and
receivables as so many months of cost of sales and sales respectively. These norms
represent the maximum levels of holding inventory and receivables in each industry.
Borrowers were not expected to hold more than that level. The fixation of these norms
was, thus, intended to reduce the dependency of industry on bank credit.
b) Lending Norms/Approach to Lending/MPBF : According to the lending norms, a part
of the current assets should be financed by the trade credit and other current liabilities.
The remaining part of the current assets, termed as working capital gap, should be partly
financed by the owners funds and long term borrowings and partly by short term bank
credit. The approach to lending is vitally significant. It takes into account all the current
assets requirements of borrowers total operational needs and not merely inventories or
receivables; it also takes into account all the other sources of finance at his command.
Another merit of the approach is that it invariably ensures a positive current ratio and,
thus, keeps under check any tendency to overtrade with borrowed funds.
c) Forms of Financing/Style ofCredit : In 1995, a mandatory limit on cash credit and a
loan system of delivery of bank credit was introduced. The cash-credit limit was initially
limited to 60% of the MPBF. The balance 40% could be availed of as short term loans.
The cash credit limit sanctions are currently 20% and loan component 80%.
d) Information and Reporting System : The main components of the information and
reporting system are four, namely,
y Quarterly Information System : Form I. Its contents are (i) production and
sales estimates for the current and the next quarter, and (ii) current assets and
current liabilities estimates for the next quarter.
y Quarterly Information System : Form II. It contains (i) actual production and
sales during the current year and for the latest completed year, and (ii) actual
current assets and current liabilities for the latest completed quarter.
y Half-yearly Operating Statement : Form III. The actual operating performance
for the half-year ended against the estimates are given in this.
-
8/6/2019 Types of Working Capital
41/44
y Half-yearly Operating Statement : Form IIIB. The estimates as well as the
actual sources and uses of funds for the half-year ended are given.
5. Commercial Papers
Commercial Paper (CP) is a short term unsecured negotiable instrument, consisting of usance
promissory notes with a fixed maturity. It is issued on a discount on a face value basis but it can
also be issued in interest bearing form. A CP when issued by a company directly to the investor
is called a direct paper. The companies announce current rates of CPs of various maturities,
and investors can select those maturities which closely approximate their holding period. When
CPs are issued by security dealer on behalf of their corporate customers, they are called dealer
paper. They buy at a price less than the commission and sell at the highest possible level. The
maturities of CPs can be tailored within the range to specific investments.
a)Advantages
- CP is a simple instrument and hardly involves any documentation.
- It is flexible in terms of maturities which can be tailored to match the cash flow of
the issuer.
- A well rated company can diversify its sort-term sources of finance from banks to
money market at cheaper cost.
- The investors can get higher returns than what they can get from the banking
system.
- Companies which are able to raise funds through CPs have better financial
standing.
- The CPs are unsecured and there are no limitations on the end-use of funds
raised through them.
- As negotiable/transferable instruments, they are highly liquid.
b) Frameworkof Indian CP Market
The CPs emerged as sources of short-term financing in the early nineties. They are regulated
by RBI. The main element of present framework are given below.
y CPs can be issued for periods ranging between 15 days and one year. Renewal of CPs
is treated as fresh issue.
y The minimum size of an issue is Rs.25 lakh and the minimum unit of subscription is Rs.5
lakh.
-
8/6/2019 Types of Working Capital
42/44
y The maximum amount that a company can raise by way of CPs is 100% of the working
capital limit.
y A company can issue CPs only if it has a minimum tangible net worth of Rs.4 crore, a
fund-based working limit of Rs.4 crore or more, at least a credit rating of P2 (Crisil ), A2 (
Icra ), PR-2 ( Care ) and D-2 ( Duff & Phelps ) and its borrowal account is classified as
standard asset.
y The CPs should be issued in the form of usance promissory notes, negotiable by
endorsement and deliver at a discount rate freely determined by the issuer. The rate of
discount also includes the cost of stamp duty ( 0.25 to 0.5% ), rating charges (0.1 to
0.2%), dealing bank fee ( 0.25% ) and stand by facility ( 0.25% ).
y The participants/investors in CPs can be corporate bodies, banks, mutual funds, UTI,
LIC, GIC, NRIs on non-repatriation basis. The Discount and Finance House of India (
DFHI ) also participates by quoting its bid and offer prices.
y The holder of CPs would present them for payment to the issuer on maturity.
c) Effective Cost/Interest Yield
As the CPs are issued at discount and redeemed at it face value, their effective pre-tax
cost/interest yield
= { (Face Value Net amount realised) / (Net amount realised) }x{(360) / (Maturity period) }
where net amount realised = Face value discount issuing and paying agent (IPA) charges
that is, stamp duty, rating charges, dealing bank fee and fee for stand by facility.
6. Factoring
Factoring provides resources to finance receivables as well as facilitates the collection of
receivables. Although such services constitute a critical segment of the financial services
scenario in the developed countries, they appeared in the Indian financial scene only in the
early nineties as a result of RBI initiatives. There are two bank sponsored organisations which
provide such services: (i) SBI Factors and Commercial Services Ltd., and (ii) Canbank Factors
Ltd. The first private sector factoring company, Foremost Factors Ltd. Started operations since
the beginning of 1997.
-
8/6/2019 Types of Working Capital
43/44
a) Definition : Factoring can broadly be defined as an agreement in which receivables
arising out of sales or goods/services are sold by a firm ( client ) to the factor ( a
financial intermediary ) as a result of which the title of the goods/services represented by
the said receivables passes on to the factor. Henceforth, the factor becomes responsible
for all credit control, sales accounting and debt collection from the buyer. In a full service
factoring concept ( without resource facility ), if any of the debtor fails to pay the dues as
a result of his financial inability/insolvency/bankruptcy, the factor has to absorb the
losses.
b) Mechanism : Credit sales generate the factoring business in the ordinary course of
business dealings. Realisation of credit sales is the main function of factoring services.
Once a sale transaction is completed, the factor steps in to realise the sales. Thus the
factor works between the seller and the buyer and sometimes with the sellers bank
together.
c) Functions of a Factor: Depending on the type/form of factoring, the main functions of a
factor, in general terms, can be classified into five categories:
i) Financing facility/trade debts :
The unique feature of factoring is that a factor purchases the book debts of his
client at a price and the debts are assigned in favour of the factor who is usually
willing to grant advances to extent of, say, 80% of the assigned debts. Where the
debts are factored with recourse, the finance provided would become refundable
by the client in case of non-payment of the buyer. However, where the debts are
factored without recourse, the factors obligation to the seller becomes absolute
on the due date of the invoice whether or not the buyer makes the payment.
ii) Maintenance/administration of sales ledger :
The factor maintains the clients sales ledger. In addition, the factor also
maintains a customer-wise record of payments spread over a period of time so
that any change in the payment pattern can be easily identified.
iii) Collection facility of accounts receivable :
The factor undertakes to collect the receivables on the behalf of the client
relieving him of the problems involved in collection, and enables him to
concentrate on other important functional areas of the business. This also
enables the client to reduce the cost of collection by way of savings in
manpower, time and efforts.
iv) Credit Control and Credit Restriction :
-
8/6/2019 Types of Working Capital
44/44
The factor in consultation with the client fixes credit limits for approved
customers. Within these limits, the factor undertakes to purchase all trade debts
of the customer without resource. In other words, the factor assumes the risk of
default in payment by the customer. Operationally, the line of credit/credit limit up
to which the client can sell to the customer depends on his financial position, his
past payment record and value of goods sold by the client to the customer.
v) Advisory Services :
These services are a spin-off of the close relationship between a factor and a
client. By virtue of their specialised knowledge and experience in finance and
credit dealings and access to extensive credit information, factors can provide a
variety of incidental advisory services to their clients.
vi) Cost ofServices :
The factors provide various services at a charge. The charge for collection and
sales ledger administration is in the form of a commission expressed as a value
of debt purchased. It is collected in advance. The commission for short term
financing as advance part-payment is in the form of interest charge for the period
between the date of advance payment and the date of collection date. It is also
known as discount charge.