Handy size for workingin small spaces

Touch Screen Control Panel

Durable & Rugged

TYPE-Q

H20

1e-VS

Lightweight, Tough, Handy

Handheld fusion splicer

TYPE-QH201e-VS

Specifications

Specifications are subject to change without prior notice. Designed in Japan201e01-NA-EN003 (2017.06)

(TP)

1

250 m, 500 m, 900 m

5~10mm

Approx. 11 sec (1C SMF)Approx. 30 sec (with FPS-61-2.6 sleeve)

2 CMOS cameras: 72X (ZOOM:216X)

−

3,000 arcs discharges

2, 4

Single fiber coating dia: 250 m, 500 m, 900 mRibbon fiber thickness: 250–400 m

10mm

Approx. 14 sec (with 4C SMF)Approx. 30 sec (with FPS-5 sleeve)

2 CMOS cameras: 36X (ZOOM: 72X)

Provided

1,500 arcs discharges

Operates normally after being dropped from 76 cm onto one face (bottom).Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)

Equivalent to IP5x (Operates normally after 8 hours in a dust

Items

Optical fiberrequirements

Standardperformance

Programs

Functions

Size / Weight

Terminals

Power supply

Operating conditionStorage conditionElectrode life *3

Software updatesData management

MaterialProfile typesFiber countCladding diameter

Coating diameter

Applicable cableCleave lengthSplice loss (typical) *1

Splice time (typical)Heating time (typical)Splice & heat cycles per battery full charge *2

Fiber view and magnificationProof testSplice programsHeating programsSplice image capture/Splice data storageOnboard user training videoAuto-startAutomatic arc calibrationAutomatic fiber count detectionRemote interactive maintenanceSizeWeightMonitorUSB portStorage mediaAC inputDC inputBattery pack

ADC-1340APC-AC<X>*ER-11—CCT-201—FHS-025FHM-4

ER-11CCT-201CCS-25BU-12SBU-12LBC-12ADC-1340APC-AC<X>FCT-201HR-3NS-201WT-201FHS-025FHS-09FHM-2FHM-4FHD-1Lynx2-UML-STRT-201VGT-2FC-8R-FC/FJR-M03JR-6FPS-1FPS-40FPS-61-2.6FPS-5

FPS-D60

Electrodes for TYPE-QH201eHard caseSoft caseStandard batteryLarge-capacity batteryFor BU-12S and BU-12LFor TYPE-QH201e main unit and BC-12For AC adapterFor cooling fiber protection sleevesAlcohol dispenserNeck strap for TYPE-QH201eWork table designed exclusively for TYPE-QH201eFor 0.25 mm single fiberFor 0.9 mm single fiberFor 2-fiber ribbonFor 4-fiber ribbonFor drop and indoor cables (single fiber)For 3 mm cord and 0.9 mm single fiberTo prevent twisting while transferring drop or thin cablesBrush for cleaning V-grooveHandheld fiber cleaver for single fiber and up to 12-fiber ribbonJacket remover for single fiberHot jacket remover for ribbon fiber60mm sleeve for single fiber40mm sleeve for single fiber60mm pre-shrunk sleeve for single fiber40 mm sleeve for single fiber and up to 8-fiber ribbon60 mm sleeve for 1C drop and indoor cables.Heat shrink sleeve for reinforcement of sheath joint

1 pc1 pc1 pair1 pc1 pc1 pc1 pair1 pair

○○○○○○○ー

○○○○○○○○○○○○○○－－○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○ー○

Silica glassSMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657)

125 m

Drop cable(2.0mm×3.1 or 2.6mm), Indoor cable(2.0mm×1.6mm)

SMF:0.05dB, MMF:0.03dB, DSF:0.08dB, NZDSF:0.08dB (With identical Sumitomo fibers)

Approx. 100 (with BU-12L)

1.96~2.09NMax. 200Max. 100

64 images/10,000 splicesProvided for basic operation and daily maintenance

Splice/HeatingAutomatically optimizes arc power according to environmental conditions (Auto mode)

Provided110(W)×140(D)×89(H)mm

700g (without Battery) / 850g (with Battery BU-12S) / 940g (with Battery BU-12L)3.5-inch color monitor with touchscreen

USB2.0 mini-BmicroSD and microSDHC

100~240V, 50 / 60Hz10~15V, 4.5A

Li-ion 11.1V, 3,060mAh(BU-12L)Altitude: 0 ~ 3,660 m, Temperature: -10 ~ +50°C, Humidity: 0 ~ 95% (non-condensing), Wind velocity: up to 15 m/sTemperature: -40 ~ +80°C, Humidity: 0 ~ 95% (non-condensing), Temperature for battery: -20 ~ +30°C(long term)

InternetCan be stored, edited and analyzed by dedicated PC software

Op

tio nal accesso

ries for Sp

licerO

ther accessories

TYPE-QH201e-VS TYPE-QH201e-M4

Environmental Durability* Optional Accessories

Basic Accessories

Operates normally after being dropped from 76 cm onto one face (bottom).Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3 mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°.)

Equivalent to IP5x (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 m or below.)

Shock resistanceWater resistance

Dust resistance

AC adapterPower cordSpare electrodesOperating CD manualCarrying caseUSB cableFiber holder

ElectrodeCarrying case

Battery pack

Battery chargerAC adapterPower cordCooling trayAlcohol dispenserNeck strapWork table

Fiber holder

Transfer toolV-groovecleaning brushHandheld fiber cleaverJacket remover

Fiber protectionsleeve

*Confirms the battery operation in tests carried out by Sumitomo. Does not guarantee that the product is free of faults or damage.

*X=2(USA), 3(EU), 5(UK), 6(AUS), 7(South Africa), 9(INDIA)At least, the above basic accessories come with splicer main body. Some additional accessories may be or may not be included as a splicer standard kit contents. The standard splicer kit contents varies in each region/country. Please ask details to your nearest distributors.

Test details

Part name Part No.

Part No. TYPE-QH201eVS M4Part name Description

Qty. TYPE-QH201eVS M4

*1 : With Sumitomo identical fibers(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.*2 : Splice & Heat cycles may vary depending on the battery status and the operating environment.*3 : Electrode life may vary depending on the operating environment.

Part Number Description

Type-QH201e-VS-KIT-1 TYPE-QH201e-VS Fusion Splicer, Spare Electrodes, Transit Case, AC Adapter and Power Cord, 250um Fiber Holders, Standard Battery, Cleaning Tools, Manual, Fiber Optic Stripper

Type-QH201e-VS-KIT-2 Includes All of KIT-1 Components; Plus FC-6S Fiber Optic CleaverType-QH201e-VS-KIT-8R Includes All of KIT-1 Components; Plus FC-8R Precision Bench Top Automatic Blade Rotation CleaverType-QH201e-VS-KIT-6RSC Includes All of KIT-1 Components; Plus FC-6RSC Cleaver

Ordering Information

Tokyo (Japan)Sumitomo Electric Industries, Ltd.Akasaka Center Building, 1-3-13, Motoakasaka, Minato-ku, Tokyo, 107-8468, JAPANTEL: +81-3-6406-2666 http://global-sei.com/sumitomo-electric-splicers

North Carolina (U.S.A) Sumitomo Electric Lightwave Corp.201 South Rogers Lane, Suite 100, Raleigh, NC 27610, U.S.A TEL: +1-919-541-8100 https://www.sumitomoelectric.com/

Handy cleaverFC-8R series

Hot jacket removerJR-6

Available for Lynx-Custom FitTM

Splice-On Connector

ElectrodeER-11