Type M, Right Angle Male DIN - ECSconn.com
Transcript of Type M, Right Angle Male DIN - ECSconn.com
1.02 [.040 ±.003]
1.15 [.0453 ±.001]
0.10 [.004] min.
.008 [.0003] min.
.03-.08 [.001-.003]
Dimensions are in mm [inch]
DIN 41612 SPECIFICATION
Temperature Range
Insulator Material
Contact Material:
Contact Plating /Performance
Per DIN 41612
Level 1
Level 2
Level 3
Contact Resistance
Insulation Resistance
Dielectric Strength
Current Range atAmbient Temp. Of
+20C
+70C
+100C
Insertion Force (N)
Withdrawal Forces Per Contact (N)
PBT 30% Glass Filled UL 94 V-0 Rated
-65°C to +125°C
Copper Alloy
3.0 Amp
2.0 Amp
1.0 Amp
>
>
>
<
<
500 Mating Cycles
400 Mating Cycles
50 Mating Cycles
20m
10 m at 100 VDC
1000 VDC
.15
12
>>
<
Type M, Right Angle Male DIN
Bellcore GR 1217 COREConnectors are available that meet the requirements of Bellcore GR 1217-CORE. Please consult factory for ordering information.
Recognized under the recognized componentProgram of Underwriters Laboratories, Inc.
File Numbers: E176234
RRC
APPROVALS
1.02 [.040 ±.003]
1.15 [.0453 ±.001]
0.10 [.004] min.
.008 [.0003] min.
.03-.08 [.001-.003]
Dimensions are in mm [inch]
DIN 41612 SPECIFICATION
Temperature Range
Insulator Material
Contact Material:
Contact Plating /Performance
Per DIN 41612
Level 1
Level 2
Level 3
Contact Resistance
Insulation Resistance
Dielectric Strength
Current Range atAmbient Temp. Of
+20C
+70C
+100C
Insertion Force (N)
Withdrawal Forces Per Contact (N)
PBT 30% Glass Filled UL 94 V-0 Rated
-65°C to +125°C
Copper Alloy
>
>
>
<
<
500 Mating Cycles
400 Mating Cycles
50 Mating Cycles
20m
10 m at 100 VDC
1000 VDC
.15
100
12
>>
<
Type E, E/2 Vertical Female DIN
Bellcore GR 1217 COREConnectors are available that meet the requirements of Bellcore GR 1217-CORE. Please consult factory for ordering information.
RRC
DRILLED HOLEDIAMETER
PLATINGTHICKNESS
HOLEDIAMETER
PADDIAMETER
INSERTIONFORCE PER PIN
WITHDRAWALFORCE PER PIN
1.15 [.0453]
Copper.03-.08 [.001-.003]
Tin .008 [.0003]min.
After Plating
.040±.003 1.65 [.065] 40 lbs. Max. 10 lbs. Min.
IEC 60603-2 Standard
Ø 2.80 [.110]
Ø 1.02 [.040]
2.54 [.100] Typical
15.70 [.618]
78.74 [3.100]
78.74 [3.100]
85.00 [3.347]
90.00 [3.543]
90.00 [3.543]
95.00 [3.740] max.
2.54 [.100] Typical
Ø 2.80 [.110]
2.90 [.114]
2.54 [.100]
5.08 [.200]
13.60 [.535]
1a
1c1b
1d1e
1a
1c1b
1d1e
Recommended P. C. Board Layout
0.30 [.012]
0.30 [.012]
Dimensions are in mm [inches]
Type E, 160 Positions
TAIL LENGTH
11.6 [.457]6.40 [.252]
.64 [.025] Typical
5.00 [.197] 6.00 [.236]
13.00 [.512] 13.00 [.512]17.00 [.669] 2.92 [.115]
4.06 [.160]
TAIL LENGTH OPTIONS
Press Fit Solder and Wire Wrap
1 2 3 4 5 6 7
Type M, Right Angle Male DIN Type E, E/2 Vertical Female DIN
38.10 [1.500]
50.00 [1.969]
SERIES CODE
NUMBER OF CONTACTS
53 X X X
CONTACT ARRANGEMENT TAIL LENGTH
MATING AREA PLATING
TAIL PLATING
X X
1 = E/2 (80 positions) = E (160 positions)2
= 161 = 322 = 483 = 644 = 965 = 1286 = 1607 = 808
PART NUMBERINGX
Type E, E/2 Female 1 = Tin = Gold flash (.200" from pin tip)2 = Gold plate 30µ” (.200" from pin tip)3 = Gold plate 15µ” (.200" from pin tip)4
1 = Class 1 = Class 22 = Class 33
1a
1a
1c
1c
1b
1b
1d
1d
1e
1e
15.70 [.618]
38.10 [1.500]
44.40 [1.748]
50.00 [1.969]
55.00 [2.165]
2.54 [.100] Typical
Ø 2.80 [.110]
Ø 1.02 [.040]
Ø 2.80 [.110]
2.54 [.100] Typical
Recommended P. C. Board Layout
0.30 [.012]
0.30 [.012]
1 = Row A, B, C, D and E fully populated Consult Factory for other Loading Options
= B, E Load2 = A, C, E Load3 = A, C4
Type E/2, 80 Positions
BODY STYLE
TAIL LENGTH
11.6 [.457]6.40 [.252]
.64 [.025] Typical
2.90 [.114]
2.54 [.100]
5.08 [.200]
13.60 [.535]
0 = 4.00 [.157] Press-Fit1 = 5.00 [.197] Press-Fit
= 13.00 [.512] Press-Fit2 = 6.00 [.236] Press-Fit3 = 17.00 [.669] Press-Fit4 = 2.92 [.115] Dip Solder5 = 4.06 [.160] Dip Solder6 = 13.00 [.512] Dip Solder Wire Wrap7
Dimensions are in mm [inches]
Type M, Right Angle Male DIN Type E, E/2 Vertical Female DIN