Type-D Motor Control Center (MCC) - · PDF fileTYPE-D LOW-VOLTAGE MOTOR CONTROL CENTER...
Transcript of Type-D Motor Control Center (MCC) - · PDF fileTYPE-D LOW-VOLTAGE MOTOR CONTROL CENTER...
TYPE-D LOW-VOLTAGEMOTOR CONTROL CENTER
SPECIFICATIONSStandards IEC61439-1/2
Rated voltage (V) 690
Rated frequency (Hz) 50 / 60
Rated nominal current (A) Up to 4000
Rated short-circuit withstand current (kA) Up to 85
Internal arc classification (as an option) 80kA/0.3s at 480Vor 65kA/0.3s at 690VInternal separation classification Up to form 4b
Degree of protection IP2X to IP43
Coordination for protective devices Type-1 or Type-2
Dimensions [mm] (WDH) 600~1300 x 600 x 2200
TYPE-TESTED LV SWITCHGEAR & MOTOR CONTROL CENTER
COPYRIGHTSAllrightsreserved.Thisdocument,orpartsthereof,shallnotbereproducedortransferredinanyformwithoutwrittenpermissionofMitsubishiElectricCorporation.
FEATURES EMC-B- Electronic multi-function motor controller1. High-visibility2. Redundant Modbus communication
1. Compact MCC unit2. Fully withdrawable units up to 300kW3. Internal arc classification4. Front operation and maintenance
suitable for container type S/S5. Coordination Type-2 compliance6. Side-by-side connection with LV
switchgear
COMPACT UNIT
1/4 unit up to 30A
1/2 unit up to 22kW
1 unit up to 300kW
Power and control circuits are automatically plug-in type.
Specifications and contents are subject to change without notice.