Two / 2 Ram Baler

American Baler builds two ram baler models that are suitable for most paper, plastic and non-ferrous metal baling applications.

If you are a paper, plastic and/or non-ferrous metal recycler American Baler will have a two ram baler models that will meet your needs. Plus we offer the best baler warranty in the business!

Two Ram Baler Features

• available with either a 43” wide frame or 60” wide frame• several charge box opening lengths• single side sheet construction• Meets all Current ANSI Z245.51 Safety Standards• Allen Bradley IEC components• EPAct TEFC Motors 460/3/60 - X Line Starting• Sequenced motor start-up with Economizer to shut down motors when not in use• Allen Bradley CompactLogix PLC• Panelview Touchscreen operator interface• Across-the-line conveyor motor starter (up to 10HP) and controls to optimize production• UL Approved NEMA 12 Electrical Enclosures• Operator controls mounted in MCC• Dual Infrared Cycle Control (Diffused)• Laser positioning• Pressure Transducer• Remote VPN Internet access• Left hand or right hand eject available• Manifold hydraulics with Regen• Hi-Lo vane pumps• Versa-Door w/transducer• Dual Infrared Cycle Control (Diffused)• Shimmable Serrated AR Shear Blade• Shear Beam Mounted at 9° Rake• Trunnion mounted main and eject cylinders• Full Main Ram Penetration• Hopper Access Door w/Safety Switch• Adjustable ram hold down bars• High/Low Floor• Replaceable Hardox 500 Floor and Ram Liner Strips alternating ½” to 1”• Replaceable ¼” Hardox 500 charge box side liners and press box side and top liners• Replaceable Hardox 500 Platen Strips• Bale table to support ejecting bale• Air-to-oil cooler• Tank Heater• Hot & Low Oil Shutdown• L & P Pinnacle II or Accent 470 Wire Tier• Dust Cover for Wire• 1 - Stem of Galvanized Wire (11 or 12 Ga.)• Surface is painted with an industrial primer and 2 coats of industrial enamel.• Anchor clips• Optional 12.4 or 18.8 ton hydraulic stamper at shear• Four power unit sizes depending on the ram cycle time and hourly production required