Tweezers and Forceps

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Tweezers2

Tweezers Reference Page

MaterialThe high quality microdissecting tweezers on the following pages are available in a number of different steel alloys. Whichalloy to choose is very important and depends on how you intend to use the tweezer. The information below is provided tohelp compare the various alloys and their respective properties. Please note that not all tweezer patterns are available in allalloys.

CARBON STEEL: At Rockwell 60, carbon steel is one of the hardest tweezer steels. Carbon steel tips are verydurable but because of this hardness, carbon steel tips are more brittle than some of the othersteels. Carbon steel is also highly magnetic and stains easily.

TITANIUM: While not as hard as some of the other alloys (Rockwell 37 at tips), titanium tips are very flexible.Another unique property of titanium is that it is 33% lighter than other stainless alloys. Titaniumis extremely corrosion and stain resistant, making it the preferred choice for salt water uses.Titanium also has a high heat resistance in excess of 400ºC and is completely non-magnetic.

STAINLESS STEEL: The common name for various alloys composed of carbon steel and chromium. Alloys consid-ered stainless exhibit good stain resistance and have varying degrees magnetism.

INOX: Inox is a specific stainless alloy composed of carbon steel and chromium. Inox tips are moreflexible than pure carbon steel but not as hard (Rockwell 55). Inox has good stain resistance andis magnetic.

DUMOXEL: One of the most popular tweezer alloys, Dumoxel is even more stain resistant than Inox and ishighly corrosion resistant. With a Rockwell 36 at the tips, tweezers made from this alloy havevery soft, flexible tips. Dumoxel is non-magnetic and exhibits high temperature resistance.

DUMOSTAR: This new alloy is a blend of steel, chromium, nickel, cobalt and has many of the best features ofthe other alloys. Dumostar is heat resistant to over 500ºC and is completely non-magnetic.Dumostar is extremely corrosion resistant and is one of the harder alloys at Rockwell 62. How-ever, because of its unique composition, Dumostar tips are very flexible, are resistant to fatigue,and are capable of flexing far beyond other alloys without permanently deforming. This alloy isfar superior in overall performance than any other material available today!

Tip DimensionsMost tweezer patterns are available in two tip styles, namely "standard" and "biologie". The dimensions of each vary by pattern.In general, the "biologie" tips are about twice as fine at the "standard" tips. Below is a chart showing the tip dimensions of bothstandard and biologie tips by pattern of some of the more popular patterns:

Tip Dimensions (mm)

BiologieStandardWidth Thickness Width Thickness

Pattern 1 0.20 x 0.12 0.10 x 0.06Pattern 2 0.34 x 0.14 0.17 x 0.07Pattern 3 0.17 x 0.10 0.08 x 0.04Pattern 4 0.13 x 0.08 0.06 x 0.02Pattern 5 0.10 x 0.06 0.05 x 0.01Pattern 7 0.17 x 0.10 0.07 x 0.03

Please consult the following pages for dimensions of patterns not listed above.

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Tweezers 3

RS-4900 Shown

RS-4960 Shown

RS-4902 Shown

RS-4962 Shown

RS-4903 Shown

RS-4966 Shown

Pattern #1length 120mmTip Profile

Pattern #3length 120mm

Tip Profile

Pattern #2length 120mm

Tip Profile

RS-4964 tip .17 x .10mm

Material: Dumostar

RS-4966 tip .08 x .04mm

Material: Dumostar

RS-5042 tip .17 x .10mm

Material: INOX

RS-4903 tip .08 x .04mm

Material: Stainless Steel

RS-5041 tip .34 x .14mm

Material: INOX

RS-4962 tip .34 x .14mm

Material: Dumostar

RS-4902 tip .17 x .07mm

Material: Stainless Steel

RS-5040 tip .20 x .12mm

Material: INOX

RS-4960 tip .20 x .12mm

Material: Dumostar

RS-4900 tip .10 x .06mm

Material: Stainless Steel

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Tweezers4

RS-4970 Shown

RS-4972 Shown

RS-4904 Shown

RS-4904 tip .06 x .02mm Material: Stainless Steel

RS-5001 tip .02 x .06mm

half curve

Material: Stainless Steel

Pattern #3Clength 110mm

Tip Profile

Pattern #4length 110mm

Tip Profile

Pattern #5 modifiedtips closing flat on 4mmlength 110mm

RS-4970 tip .08 x .04mm

Material: Dumostar

RS-5043 tip .17 x .10mm Material: INOX

RS-4968 tip .17 x .10mm Material: Dumostar

RS-4972 tip .13 x .08mm

Material: Dumostar

RS-4974 tip .06 x .02mm Material: Dumostar

RS-5044 tip .13 x .08mm Material: INOX

RS-5000 tip .02 x .06mm Material: Stainless Steel

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Tweezers 5

Pattern #5length 110mmTip Profile

RS-4905 Shown

RS-4976 Shown

RS-4905 tip .05 x .01mm Material: Stainless Steel

RS-4976 tip .10 x .06mm Material: Dumostar

RS-4978 tip .05 x .01mm Material: Dumostar

Pattern #5, 45o anglelength 109mm

Tip Profile

RS-5005 tip .05 x .01mm

Material: INOX

RS-4918 Shown

RS-5005 Shown

RS-4918 tip .05 x .01mm

Material: Stainless Steel

RS-5058 tip .10 x .06mm

Material: Dumoxel

RS-5035 tip .08 x .04mm

Material: Carbon Steel

RS-5045 tip .10 x .06mm

Material: INOX

RS-5015 tip .05 x .01mm

Material: INOX

RS-5050 tip .05 x .01mm

Material: Titanium

RS-5055 tip .10 x .06mm

Material: Titanium

RS-5065 tip .10 x .06mm

Material: Dumoxel

RS-5060 tip .05 x .01mm

Material: Dumoxel

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Tweezers6

RS-4919 tip .05 x .01mm

Material: Stainless Steel

Pattern #5, 90o anglelength 106mm

Tip Profile

Pattern #5, 15o uplength 105mm

Tip Profile

Pattern #55length 110mmTip Profile

RS-5063 tip .05 x .01mm Material: Dumoxel

Pattern #5Aoblique pointslength 115mm

Tip Profile

RS-5010 Shown

RS-4984 tip .05 x .01mm

light superfine points

Material: Dumostar

RS-5010 tip .05 x .01mm

light superfine points Material: INOX

RS-4928 tip .06 x .02mm

Material: Stainless Steel

RS-5045A tip .10 x .06mm Material: INOX

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Tweezers 7

Pattern #N5cross actionsuperfine pointslength 108mm

Tip Profile

Pattern #6length 115mmTip Profile

RS-5020 tip .05 x .01mm

Material: INOX

RS-5047 tip .17 x .10mm Material: INOX

RS-4980 tip .17 x .10mm Material: Dumostar

RS-4982 tip .07 x .03mm Biologie Material: Dumostar

RS-5047 Shown

RS-4907 Shown

RS-5046 tip .17 x .10mm

Material: INOX

RS-4906 tip .17 x .10mm

Material: Stainless Steel

RS-4907 tip .07 x .03mm

Material: Stainless Steel

Pattern #7length 115mmTip Profile

RS-5037 tip .07 x .03mm Biologie Material: Dumoxel

RS-5057 tip .17 x .10mm Material: Titanium

RS-5064 tip .17 x .10mm Biologie Material: Dumoxel

RS-5039 tip .07 x .03mm Material: Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Tweezers8

Pattern #N7cross actionlength 115mm

Tip Profile

Pattern #SS Longnarrow, delicatelength 135mmTip Profile

RS-4940 tip .10 x .06mm Material: Stainless Steel

Pattern #PPheavy dutylength 135mm

Tip Profile

RS-4951 tip .10 x .06mm

45o Angle

Material: Stainless Steel

RS-4950 tip .10 x .06mm

Material: Stainless Steel

RS-4941 tip .10 x .06mm 45o angle Material: Stainless Steel

RS-5027 tip .07 x .03mm Material: INOX

RS-4935 tip .07 x .03mm

Material: Stainless Steel

Pattern #7S short curvelength 117mmTip Profile

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 9

RS-5068 McPHERSONstraightsmooth tying platformtip 0.3 x 5mm

length 31/2"

RS-5069 McPHERSONangledsmooth tying platformtip 0.4 x 7mm

length 4"

RS-5070 Micro Dissectingstraightfine pointslength 31/4"

RS-5075 Micro Dissectingcross actionfine pointslength 31/2"

RS-5079 Micro Dissectingsmooth jaws, angularextra fine tipslength 31/2"

RS-5090 Micro Dissectingstraightfine sharp pointslength 4"

RS-5095 Micro Dissectingangledfine sharp pointslength 4"

RS-5096 HARMSmicro suturingstraight with platformtip width 0.6mm

length 4"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps10

RS-5097 HARMSmicro suturingcurved with platformtip width 0.6mm

length 4"

RS-5100 FOERSTERstraightserrated tipstip width 0.5mm

length 4"

RS-5101 FOERSTERcurvedserrated tipstip width 0.5mm

length 4"

RS-5102 FOERSTERstraight1x2 teethtip width 0.5mm

length 4"

RS-5111 GRAEFEserrated, curvedtip width 0.6mm

length 23/4"

RS-5110 GRAEFEserrated, straighttip width 0.6mm

length 23/4"

RS-5112 GRAEFE1x2 teeth, straighttip width 0.6mm

length 23/4"

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 11

RS-5113 GRAEFE1x2 teeth, curvedtip width 0.6mm

length 23/4"

RS-5130 Micro Dissectingserrated, straighttip width 0.8mm

length 4"

RS-5132 Micro Dissectingserrated, straightextra delicatetip width 0.5mm

length 4"

RS-5136 Micro Dissectingserrated, slight curveextra delicatetip width 0.5mm

length 4"

RS-5135 Micro Dissectingserrated, slight curvetip width 0.8mm

length 4"

RS-5137 Micro Dissectingserrated, full curvetip width 0.8mm

length 4"

RS-5138 Micro Dissectingserrated, full curveextra delicatetip width 0.5mm

length 4"

RS-5139 Micro Dissectingserrated, angulartip width 0.8mm

length 4"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps12

RS-5150 Micro Dissecting1x2 teeth, straighttip width 0.8mm

length 4"

RS-5152 Micro Dissecting1x2 teeth, straightextra delicatetip width 0.5mm

length 4"

RS-5153 Micro Dissecting1x2 teeth, slight curvetip width 0.8mm

length 4"

RS-5155 Micro Dissecting1x2 teeth, slight curveextra delicate

tip width 0.5mm

length 4"

RS-5157 Micro Dissecting1x2 teeth, full curvetip width 0.8mm

length 4"

RS-5158 Micro Dissecting1x2 teeth, angulartip width 0.8mm

length 4"

RS-5163 ARRUGAmicro embryoniccapsule, curvedlength 4"

RS-5165 GILLslight curvedelicate cross serrationstip width 0.6mmlength 3"

Please note: Handle in photo slightly different than actual instrument

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 13

RS-5166 GILLslight curve, 1x2 teethtip width 0.6mmlength 3"

RS-5168 BOTVINserrated tipstip width 0.5mmlength 3"

RS-5170 BONNwith tying platform1x2 teeth0.12mm teethlength 23/4"

RS-5172 BONNwith tying platform1x2 teeth0.12mm teethlength 33/4"

RS-5174 McPHERSONstraightwith tying platform1 x 2 teeth0.2mm teethlength 31/2"

RS-5175 McPHERSONangledwith tying platform1 x 2 teeth0.2mm teethlength 31/2"

RS-5180 BISHOP-HARMONcross serratedtip width 0.5mm

length 31/4"

RS-5182 BISHOP-HARMON1x2 teeth0.3mm teeth

length 31/4"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps14

RS-5231 BROWN ADSON7x7 teethside graspinglength 43/4"

RS-5190 STEVENS1 x 2 teethtip width 1mm

length 4"

RS-5204 McCULLOUGHsmooth jawstip width 1.5mm

length 4"

RS-5206 McCULLOUGHcross serrated jawstip width 1.5mm

length 4"

RS-5210 BONNACOLTOlongitudinal serrationscross serrated at tiptip width 1.2mm

length 4"

RS-5211 BRACKENcurvedfine cross serrationslength 4"

RS-5228 NUGENTangular, smooth jaws

tip width 1.2mm

length 41/4"

RS-5230 Micro-ADSONserrated, delicatetip width 0.5mm

length 43/4"

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 15

RS-5232 Micro-ADSON1 x 2 teeth, delicatetip width 0.5mm

length 43/4"

RS-5235 without serrationstip width 1mm

RS-5233 Shown

ADSONlength 43/4"

1 x 2 teethRS-5233 with serrations

tip width 1mm

RS-5234 ADSON2 x 3 teethtip width 1.3mm

length 43/4"

RS-5236 ADSONcross serratedcarbide jawslength 43/4"

RS-5237 HUDSON (EWALD)serratedlength 43/4"

RS-5238 HUDSON (EWALD)length 43/4"

1 x 2 teeth

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps16

RS-5262 Shown

RS-5264 Shown

RHOTONmicro suturingw/ tying platformcurved

RS-5263 length 5"

RS-5264 length 7"

SEMKENlength 5"

RS-5240 serratedtip width 1.2mm

RS-5242 1x2 teethtip width 1.2mm

RS-5244 2x3 teethtip width 2mm

RS-5242 Shown

SEMKENtip width 1.6mm

length 6"

RS-5246 serrated

RS-5248 1 x 2 teeth

RS-5248 Shown

SINGLEYheart holding forceps

RS-5255 length 6"

RHOTONmicro suturingw/ tying platformlength 7"

RS-5260 tip width 0.7mmRS-5262 tip width 0.3mm

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 17

GERALDlength 7"

RS-5270 straight, serratedRS-5272 straight, 1 x 2 teeth

RS-5270 Shown

GERALDlength 7"

RS-5271 curved, serratedRS-5273 curved, 1 x 2 teeth

RS-5270 Shown

CUSHINGscraper endlength 7"

RS-5280 serratedRS-5282 1 x 2 teeth

RS-5280 Shown

CUSHINGcross serratedlength 7"

RS-5284 carbide jaws

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps18

RS-5358 Shown

Micro Dissectingangled

tip length 11mm

length 6"

RS-5358 serrated jawsRS-5359 smooth jaws

SMITHserrated

RS-5310 length 7"RS-5312 length 81/4"RS-5314 length 91/2"

RS-5310 Shown

POTTS-SMITH1 x 2 teethserrated

RS-5320 length 7"

RS-5320 Shown

RS-5348 Micro Alligatoroval cup serrated jawstip width 0.8mm

jaw length 4mm

shaft length 31/4"

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 19

Thumb DressingRS-8100 length 41/2"

RS-8102 length 5"

RS-8104 length 51/2"

RS-8106 length 6"

RS-8108 length 8"

RS-8110 length 10"

RS-8112 length 12"

RS-8100 Shown

Thumb Dressingdelicate

RS-8120 length 41/2"

RS-8122 length 5"

RS-8124 length 51/2"

RS-8126 length 6"

RS-8140 Thumb Dressinglength 3"

BROWN8 x 8 teethside grasping

RS-8242 length 6"

RS-8243 length 8"

RS-8244 length 10"

RS-8242 Shown

RS-8120 Shown

Splinter Forcepsfine points

RS-8150 length 31/2"

RS-8152 length 4"

RS-8154 length 41/2"

RS-8150 Shown

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps20

Tissue Forceps1 x 2 teethdelicate

RS-8180 length 41/2"

RS-8182 length 5"

RS-8184 length 51/2"

RS-8186 length 6"

RS-8180 Shown

Tissue Forceps2 x 3 teeth

RS-8208 length 41/2"

RS-8210 length 5"

RS-8212 length 51/2"

RS-8214 length 6"RS-8208 Shown

Tissue Forceps3 x 4 teeth

RS-8220 length 5"

RS-8224 length 6"

RS-8220 Shown

RS-8240 STILLE4 x 5 teethlength 5"

RS-8247 HARMON 4 x 5 teethjaw width 2.5mmlength 3"

RS-8248 GRAEFEjaw width 4.5mmlength 41/4"

Tissue Forceps1 x 2 teeth

RS-8160 length 41/2"

RS-8162 length 5"

RS-8164 length 51/2"

RS-8166 length 6"

RS-8160 Shown

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

Micro Dissecting Forceps 21

RS-8249 GRAEFElockingjaw width 4.5mmfine teethlength 41/4"

RS-8260 KUEHNEflat jaw, angledlength 4"

RUSSIANRS-8270 length 6"

RS-8270 Shown

RS-8280 WILDEserrated, angularlength 5"

RS-8254 MOLONEYserratedslight curvelength 41/2"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

Micro Dissecting Forceps22

RS-8290 LUCAEserrated, bayonetlength 53/4"

DeBAKEYjaw width 2.5mm

RS-7560 length 6"

RS-7562 length 73/4"

RS-7560 Shown

DeBAKEYjaw width 1.5mm

RS-7561 length 6"

RS-7566 length 8"

RS-7561 Shown

JANSENserrated, bayonet

RS-8298 length 73/4"

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

23

RS-7112 Shown

RS-7110 Shown

RS-7100 Shown

HALSTEDmosquitoextra delicatelength 5"

RS-7112 straight

RS-7113 curved

HALSTEDmosquitolength 5"

RS-7110 straight

RS-7110L left handed version

RS-7111 curved

RS-7111L left handed version

HARTMANmosquitolength 31/2"

RS-7100 straight

RS-7101 curved

Delicate Hemostatic Forceps

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

24

RS-7114 Shown

RS-7116 Shown

PACKERmosquitoflat jawslength 5"

RS-7114 straight

RS-7115 curved

JACOBSONmicro mosquitoextra delicatelight weightlength 5"

RS-7116 straight

RS-7117 curved

Delicate Hemostatic Forceps

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

25

RS-7140 Shown

RS-7130 Shown

RANKINlength 61/4"

RS-7140 straightRS-7141 curved

KELLYlength 51/2"

RS-7130 straightRS-7130L left handed versionRS-7131 curvedRS-7131L left handed version

Hemostatic Forceps

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

26

CRILERS-7152 straight

length 51/2"RS-7153 curved

length 51/2"RS-7154 straight

length 61/4"

CRILEextra delicatelength 51/2"

RS-7150 straightRS-7151 curved

RS-7150 Shown

Hemostatic Forceps

RS-7152 Shown

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

27Hemostatic Forceps

ROCHESTER-PEANstraight

RS-7172 length 51/2"

RS-7174 length 61/4"

RS-7176 length 71/4"

RS-7182 length 10"

ROCHESTER-PEANcurved

RS-7173 length 51/2"

RS-7175 length 61/4"

RS-7177 length 71/4"

RS-7183 length 10"

RS-7172 Shown

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

28

RS-7220 PENNINGTONtriangular jawslength 6"

RS-7211 REYNOLDSfull-curvelength 51/2"

Hemostatic Forceps

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

29

RS-7231 Shown

GEMINI-MIXTERfull curve, delicate

RS-7231 length 51/2"

RS-7233 length 7"

RS-7250 Shown

ADSONlength 71/4"

RS-7250 straightRS-7251 curved

Hemostatic Forceps

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

30

RS-7270 Shown75% of Actual Size

Mosquitodelicatelength 81/4"

RS-7270 straight

RS-7271 curved

Hemostatic Forceps

RS-7291 MIXTERcurved, extra delicatelength 51/2"

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

31

MIXTERfull curve

RS-7293 length 61/4"

RS-7293 Shown

RS-7305 Shown75% of Actual Size

KANTROWITZdelicate, 90˚ angle

RS-7305 length 71/2"

Hemostatic Forceps

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

32

RS-7660 Shown

COOLEY-DERRAanastomosis clamp5mm calibrations on jawslength 61/4"

RS-7660 small clamp

RS-7341 SCHNIDTslight curvelength 71/2"

75% of Actual Size

Hemostatic Forceps

DeBAKEYbulldog clampsring handlelength 43/4"

RS-7580 straightRS-7581 curved

RS-7580 Shown

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

33Atraumatic Hemostatic Forceps

ALLIS4x5 teeth, delicate

RS-8000 jaw width 4mmlength 51/2"

RS-8001 jaw width 2.5mmlength 5"

RS-8001 Shown

RS-8002 Shown

ALLISRS-8002 4x5 teeth

length 6"RS-8004 5x6 teeth

length 6"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

34

RS-8020 Shown

BABCOCKRS-8020 jaw width 6mm

length 51/2"RS-8022 jaw width 9mm

length 61/4"

Atraumatic Hemostatic Forceps

MM

67 5 4 3 2 1 INCHES

180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10190

35

ST. VINCENTTube Occluding Forcepsnarrow jawsstraight, serratedwith lockguard

RS-7476 length 53/4"

RS-7478 length 71/2"

RS-7476 Shown

Tube Occluding Forceps

RS-7710 Shown

FOERSTERsponge forceps

RS-7710 straight, serrated jawslength 7"

RS-7720 straight, serrated jawslength 91/2"

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180MM

1 2 3 4 5 6 7INCHES

190

36

65-7480 Shown

Tube OccludingForcepssmooth jaws, straight

65-7480 length 41/2"

65-7490 length 7"

65-7487 ST. VINCENTtube occludingforcepssmooth jaws, curvedlength 61/2"

Tube Occluding Forceps