Tutorial Sepp Aircom
-
Upload
captainscasper -
Category
Documents
-
view
17 -
download
0
description
Transcript of Tutorial Sepp Aircom
-
AIRCOM International
1
Technical Support
AIRCOM OPERATION STEPS
Author : Putri Nurina ayuningtias [email protected] Date : 06 January 2010
-
AIRCOM International
2
CONTENT
1. Tutorial Create Project ................................................................................................. 3 Create Best Server .................................................................................................. 14
Delete Site .............................................................................................................. 33
Selection Site ......................................................................................................... 35
Change Site Configuration ..................................................................................... 36
Change Coordinate Longitude and Latitude .......................................................... 38
Create report ........................................................................................................... 39 2. Tutorial Create C/I Plot ................................................................................................ 41
3. Tutorial Create Aircom Picture (Coverage & C/I Plot) ............................................... 51 Calculate Polygon Statistic .................................................................................... 63
4. Tutorial Create Filter .................................................................................................... 67
-
AIRCOM International
3
TUTORIAL CREATE PROJECT & BEST SERVER
1. Prepare site import make xml file fill make resolution OK
Make folder temp C:\temp Make sure map resolution is correct. For city area 20, island 50.
2. Open AIRCOM ENTERPRISE Suite
3. Make new project Start Project Add
-
AIRCOM International
4
Fill project name
-
AIRCOM International
5
Change Coordinate System :
Group Universal Transvesre Mercator
System The zone is depend on digital map
Datum WGS84
-
AIRCOM International
6
Fill Map data directories based on digital map
-
AIRCOM International
7
User data directories:
Make folders in your computer drive such as user preference, prediction, coverage array, and user line
Browse based on folder that already make
Browse Color palette in Program File AIRCOM International
ENTERPRISE 5.2 Common colours.txt
-
AIRCOM International
8
Map Data Extend Calculate OK
Start Project
-
AIRCOM International
9
4. Import xml file feeder
Browse xml feeder file
-
AIRCOM International
10
5. Import xml file Propagation Model same with no. 4 6. Import antenna file
Sign Add to all projects if all project use same antenna.
-
AIRCOM International
11
7. Commit Propagation Model
Commit all propagation models one by one
-
AIRCOM International
12
8. Commit feeder
Just commit all directly commit all feeder type
-
AIRCOM International
13
9. Commit Antenna
Just commit all directly commit all antenna type Commit Antenna only at the first time create project (in case all project use same antenna), others project unnecessary.
-
AIRCOM International
14
CREATE BEST SERVER
10. Import site
Browse xml site import file C:\temp Only select 3 file as below except Neighbors.xml
-
AIRCOM International
15
-
AIRCOM International
16
11. Insert Polygon
Put polygon file on user line folder
Make sure polygon coordinate is same with digital map coordinate
-
AIRCOM International
17
Select User Vectors Add Vector Fill name of vector
-
AIRCOM International
18
Select user line folder that contain polygon file
Right click and select import vector file
-
AIRCOM International
19
Select polygon file on user line folder
-
AIRCOM International
20
Delete previous vector file and save all
12. Open 2D View
-
AIRCOM International
21
Open Key/Legend
12. Show polygon and site
Data Types User Vectors select polygon
Data Types Filters select All
-
AIRCOM International
22
Click filters All Property, MSC, BSC select shape None
-
AIRCOM International
23
-
AIRCOM International
24
Make the polygon fit with 2D View using Zoom button Right click Favorites Save As
-
AIRCOM International
25
Fill name of Favorite
13. Change Service Level
-
AIRCOM International
26
Change the color and label as needed using Add, Remove, and Modify button. The color below is just example for phase 1.
-
AIRCOM International
27
Change the service level as needed Apply Commit. The service level below is just example for phase 1
14. Calculate Pathloss Prediction
-
AIRCOM International
28
If want to calculate all site in 2D View select Sites and cells in view then click in 2D View
If want to calculate just selection site select Sites and cells in filter (selection) after select the selection site in 2D View
-
AIRCOM International
29
15. Make Best Server
-
AIRCOM International
30
Make sure Filter is correct
Only select Best Server
-
AIRCOM International
31
Select Best Server Redraw
16. Export to MapInfo file (.TAB)
-
AIRCOM International
32
Browse file output directory
Select Generate TAB/DAT files
Coordinate project same with coordinate digital map
-
AIRCOM International
33
ADDITIONAL TUTORIAL
17. Delete site
-
AIRCOM International
34
Click Wastebasket
-
AIRCOM International
35
18. Selection Site
-
AIRCOM International
36
Select site that needed as below
19. Change site configuration (if needed) Antennas Antena and Feeder type, Azimuth, Downtilt, etc
General Propagation Model
After change Apply Commit All
-
AIRCOM International
37
Change Power of BTS depend on Propagation Model
-
AIRCOM International
38
20. Change Coordinate Longitude and Latitude
-
AIRCOM International
39
Select DLL then change the coordinate
21. Create Report
-
AIRCOM International
40
Select Format Excel Select information that wants to report Generate
-
AIRCOM International
41
TUTORIAL CREATE C/I PLOT
1. Prepare site import fill Cell ID and BCCH column based on C/I database using vlookup expression make xml file.
2. Open Project in Aircom 3. Setting configuration C/I Plot
Select 1800
-
AIRCOM International
42
At General fill name BCCH-Layer select Control layer Apply and Commit
-
AIRCOM International
43
At Carriers select all Carriers Available move to right side Apply and Commit
-
AIRCOM International
44
At Carriers Layers Move BCCH-Layer to right side Apply Commit
-
AIRCOM International
45
At Serving and Interfering Cells select 4 items as below
-
AIRCOM International
46
At Coverage/Interference select 3 items as below
4. Import Site that already prepare BCCH and CI procedure same with no. 10 Create Best Server
5. Calculate Pathloss Prediction
-
AIRCOM International
47
6. Create Arrays make sure Filter is correct and select Best Server, Worst Interferer and Total Interference
-
AIRCOM International
48
7. Set C/I service level select Total Interference and double click
-
AIRCOM International
49
Select interference units C/I and Change color and level dB
Set color and level dB as below (for all region except Balikpapan)
For Balikpapan color and level dB as below
-
AIRCOM International
50
Select Total Interference Redraw
-
AIRCOM International
51
TUTORIAL CREATE AIRCOM PICTURE (Coverage Plot and C/I Plot)
1. Create Arrays just for site around the polygon then only select Best server Coverage Plot only Best Server
C/I Plot Best Server, Worst Interferer and Total Interference
2. Create Polygon that want to create picture
-
AIRCOM International
52
Select User Vectors Add Vector and Fill name of vector
Select user line folder that contain polygon file
-
AIRCOM International
53
Select tes.tab click Shape
-
AIRCOM International
54
Follow polygon line until back to start. Then double click at the start. Close Drawing Box
-
AIRCOM International
55
-
AIRCOM International
56
User Vectors Select polygon (tes) Double click at polygon (tes) setting the width of polygon Apply If needed also can change Color and Style of polygon
-
AIRCOM International
57
Set the polygon in order to fit with 2D View
3. Create the picture
-
AIRCOM International
58
Orientation select Landscape Printer Universal Document Converter
-
AIRCOM International
59
-
AIRCOM International
60
Fill The Title (depending on the needs)
-
AIRCOM International
61
-
AIRCOM International
62
Aircom Picture
-
AIRCOM International
63
ADDITIONAL TUTORIAL
4. Calculate Polygon Statistic
Create polygon that want to calculate
Create Best Server only for site around polygon
Right Click at Best server select Statistic
-
AIRCOM International
64
Analysis Area Restrict polygon by select only polygon that want to calculate
Report Section also restrict the polygon
-
AIRCOM International
65
Report Section select depending on the needs
Pixel Criteria Definitions also select depending on the needs Generate
-
AIRCOM International
66
Select Microsoft Excel
-
AIRCOM International
67
TUTORIAL CREATE FILTER
1. Prepare Site Import base on OnAir site list Give sign n for not OnAir site and sign y for OnAir site create xml file
2. Open Project in Aircom 3. Setting configuration Filter
-
AIRCOM International
68
Fill filter name n for not OnAir and y for Onair
-
AIRCOM International
69
Select ID move to right side
Click Cell Site ID select Operator Contains Fill sign n
-
AIRCOM International
70
Filter Type select Dynamic
Element Types select All Types
At General Uncheck Property, MSC, and BSC At Cell Site Shape circle (1), Line and Fill color is Black (follow this configuration)
-
AIRCOM International
71
At Cell (GSM) Shape (0)
-
AIRCOM International
72
4. Make filter again for OnAir Site the configuration is same with not OnAir Site but different color (follow this configuration)
5. Import Site that already prepare procedure same with no. 10 Create Best Server
-
AIRCOM International
73
6. Only show OnAir Site (y) Redraw
7. Calculate Pathloss Prediction only OnAir Site 8. Create Best Server
-
AIRCOM International
74
9. Select Best Server and select filter n & y Redraw