8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 1/7

TUTORIAL: Routing - Pipes and Tubes in SolidworksSOLIDWORKS tubes solidworks  pipes routing tutorial 

By Victor Bonavarte 6779 on 12 Dec 08:51 5 answers 11701 views 1 comment 

Simple tutorial in making the pipe and connect it to the flange

Added images

Question unclear or needs more details before answering?  Comment (1)

5 answers

 

Victor Bonavarte 6779 over 1 year ago 

o 

TUTORIAL: Routing - Pipes and Tubes in Solidworks

2.  Step 1

I will make it in assembly

3.  Step 2

The first thing you should do.

select Tools - Add Ins - and select solidworks Routing

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 2/7

 

4. 

Step 3

and select a design library - Routing - Piping - flange - choose one, here I use the slip on weld flange.

5.  Step 4

and select the configuration you want. here I am using the first

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 3/7

 

6. 

Step 5

make your settings. then ok.

7.  Step 6

and will appear as in the picture, you can slide the line according your dimensions ..

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 4/7

 

8. 

Step 7

after that the result will be like this, and forming pipe

9.  Step 8

then I added a flange back

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 5/7

 

10. 

Step 9

then I added a back flange valves in part.

11. Step 10

the same as that to step 6, and then click on flange face - right click and select add route.

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 6/7

 

12. 

Step 11

and will display the image like this, then I will make the line manually, because it does not use the "auto route"

13. Step 12

The line that I created manually. and it can do to suit your needs ..

8/20/2019 Tutorial - Routing Pipes and Tubes in Solidworks

http://slidepdf.com/reader/full/tutorial-routing-pipes-and-tubes-in-solidworks 7/7

 

14. 

Step 13

and after the exit, the result is like this.

I hope this tutorial is useful for you to learn ..

thank you.