Turnstile-Tripod-Fullheight
3
SHALOM SECURITY PRODUCTS The automatic compact manually operated drop arm tripod turnstile is designed and manufactured by Shalom. This reliable yet compact turnstile is especially suitable for applications where high flow rate, small footprint and easy installation is required. The Shalom turnstile includes an anti-panic device, which in the event of a power failure, automatically unlocks allowing the arm to instantaneously drop. Raising the arm is done manually once power has been restored. Manufactured from high grade 304 stainless steel the SHALOM turnstile comes with an ultra-reliable mechanical head mechanism giving unprecedented years of service. After each passage the barrier arms are automatically returned to home position. Smoothness of operation is ensured by the damper. The arm rotation sensors track passages through the turnstile to ensure accurate count outputs to access control systems optionally fitted counters. The turnstile is operated from the logic board fitted inside the housing and can be easily integrated with most access control devices such as: card readers, coin/token acceptors, ticketing systems, etc. There is also a dedicated fire alarm input. APPLICATION Building Sites. Offices. Banks. Exhibition Centers. Museums. Administrative Buildings. Retail Outlets. Railway Terminals. Airports, etc. OPERATING MODES. The SHALOM turnstile can operate in 3 different modes. 1. Access permanently free, in either or both directions. 2. Access permanently mechanically locked, in either or both directions. 3. Electrically controlled access. All above operation modes providing free and unobstructed safe passage for users in case of power failure. Mode of operation to be clearly defined at the time of order TRIPOD TURNSTILE MODEL: SE TT, MAKE: SHALOM ADVANTAGES AT A GLANCE Low cost Robust Reliable LED directional indicator User friendly Compact, small footprint Easy to install Easily integrated with any access control system offering N/O or N/C volt free contact Low power consumption
-
Upload
shalom-enterprises -
Category
Documents
-
view
27 -
download
0
Transcript of Turnstile-Tripod-Fullheight
SHALOM SECURITY PRODUCTS
The automatic compact manually operated drop arm tripod
turnstile is designed and manufactured by Shalom.
This reliable yet compact turnstile is especially suitable for
applications where high flow rate, small footprint and easy
installation is required.
The Shalom turnstile includes an anti-panic device, which in
the event of a power failure, automatically unlocks allowing
the arm to instantaneously drop. Raising the arm is done
manually once power has been restored.
Manufactured from high grade 304 stainless steel the
SHALOM turnstile comes with an ultra-reliable mechanical
head mechanism giving unprecedented years of service.
After each passage the barrier arms are automatically
returned to home position. Smoothness of operation is
ensured by the damper. The arm rotation sensors track
passages through the turnstile to ensure accurate count
outputs to access control systems optionally fitted counters.
The turnstile is operated from the logic board fitted inside the
housing and can be easily integrated with most access control
devices such as: card readers, coin/token acceptors, ticketing
systems, etc. There is also a dedicated fire alarm input.
APPLICATION Building Sites.
Offices.
Banks.
Exhibition Centers.
Museums.
Administrative Buildings.
Retail Outlets.
Railway Terminals.
Airports, etc.
OPERATING MODES.
The SHALOM turnstile can operate in 3 different modes.
1. Access permanently free, in either or both
directions.
2. Access permanently mechanically locked, in either
or both directions.
3. Electrically controlled access.
All above operation modes providing free and
unobstructed safe passage for users in case of power
failure.
Mode of operation to be clearly defined at the time of order
TRIPOD TURNSTILE
MODEL: SE TT, MAKE: SHALOM
ADVANTAGES AT A GLANCE
Low cost
Robust
Reliable
LED directional indicator
User friendly
Compact, small footprint
Easy to install
Easily integrated with any access control system
offering
N/O or N/C volt free contact
Low power consumption
SHALOM SECURITY PRODUCTS FULL HEIGHT TURNSTILE
MODEL: SE-FHT
ISO 9001: 2008 CE CERTIFIE
TECHNICAL SPECIFICATIONS FOR TURNSTILES
S. No Parameter Specifications
1 Technology Solenoid locking mechanism 3 X 120 degree indexing
2 Rotation/Type 120 degree stop (Tri-arm) / Drop Arm with torque motor
3 Material Of
Construction
Body: SS-304 OR Mild Steel powder coated
ARMS: SS recessed into the cabinet
4 Internals Corrosion, abrasion and rust free alloy of high strength
5 Power 230 VAC +/- 10% single phase
6 Frequency 50 Hz.
7 Duty Cycle 100%
8 Power Off Free to rotate in either directions
9 Power Consumption 30 Watt
10 Operation Bi-directional
11 Passage control Passage to be controlled in one or either direction
12 Locking Mechanism to prevent the turnstile rotating in the opposite
direction once it has 25 degrees fast the rest position.
13 Self Cantering
Mechanism
With Hydraulic damping to ensure head always rotate quietly and
smoothly to the natural [position.
14 Action lock Positive action lock which prevents two passage at one time
15 Through Put 40 person per minute without access control
15- 20 per Minute with access control
16 Integration (Input)
With any access control device like smart card Reader and / or
Finger Print Reader (biometrics based Access Control System
Input required: Potential free contacts OR 5 Volt Pulse
17 Output
Rotation(Detection
Switch)
After 10° OR 45° rotation of rotor
18 Temperature range
5 to 55 degree C
19 Humidity 90% non-condensing
20 Intelligence Built-in logic control
21 Installation Fixed to Concrete Floor by means of Anchor bolts, supplied with
the Turnstile
Shalom Enterprises, Plot no – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 7394, email :
[email protected], [email protected],
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: [email protected],
Web: www.shalomsystems.net
