Tuffline Fabric Lightboxes - Flash Graphics · lightboxes. If brighter illumination is required, we...
8
Tuffline Fabric Lightboxes
Transcript of Tuffline Fabric Lightboxes - Flash Graphics · lightboxes. If brighter illumination is required, we...
Tuffline Fabric Lightboxes
A Tuffline Lightbox is the perfect way to make your graphic stand out.
The tuffline Single Sided Lightbox is designed to be attached to a wall. The Edgelit Lightbox should have the wall section directly behind it painted white to reflect the light beams. For narrow Edgelit lightboxes only the 2 longest opposing sides need to be illuminated, larger lightboxes may require all 4 sides to be illuminated.
Our premium Panel Lit Lightbox has a backing board built in whereon the LED light panels are attached. The Panel Lit Lightbox has superior brightness and even light distribution.
Graphics on all Tuffline Lightboxes are fabric, making graphic installation quick and easy.
Far Left: Narrow Edgelit Lightbox with 2 illuminated sides.
Left: Larger Edgelit Lightbox with 4 illuminated sides
Right: Edgelit Lightbox with 4 illuminated sides, size: 2.4m wide by 3m high
Left: Panel Lit Lightbox
Right: Panel Lit Lightbox shown with graphic on and off.
Tuffline Single Sided Lightbox
Tuffline Single Sided Lightbox Assembly
Above:
Mounting bracket screwed into the back wall to firmly hold the lightbox in position.
Above:
Corner brackets used for joining the 4 sides of the lightbox.
Above:
80mm connector: Used to join lengths of extrusion together.
180mm connector: Used to join lengths of extrusion together.
Tuffline Single Sided Lightbox extrusion depth: 80mm
Tuffline Double Sided LightboxFar Left: Double sided Lightbox with 2 illuminated sides.
Left: Larger Double sided Lightbox with 4 illuminated sides
Right: Double sided Lightbox with ladder lights.
Below: Close up of Ladder Lights
A Tuffline Lightbox is the perfect way to make your graphic stand out.
The Tuffline Double Sided Lightbox has a graphic on both sides that are illuminated equally. The Lightbox is usually bolted to the ground for stability.
For narrow lightboxes only the 2 longest opposing sides need to be illuminated, larger lightboxes may require all 4 sides to be illuminated.
Graphics on all Tuffline Lightboxes are fabric, making graphic installation quick and easy.
Our standard foot is attached to the side of the frame.
Tuffline Double Sided Lightbox Assembly
Above:
Corner brackets used for joining the 4 sides of the lightbox.
Above:
180mm connector: Used to join lengths of extrusion together.
Tuffline Double Sided Lightbox extrusion depth: 120mm
Lighting OptionsTuffline Lightboxes come with a number of lighting options which vary in illumination and price. Our edge lit LED lights come standard in our lightboxes. If brighter illumination is required, we have additional lighting options available.
The lighting options can be used in both single sided and double sided lightboxes except for the Premium Panel Lights which can only be used in single sided lightboxes.
Edge lit LED lightsSingle & Double Sided Lightboxes
Premium Panel LightingSingle Sided Lightboxes only
Premium Ladder LightingSingle & Double Sided Lightboxes
Tuffline Lightbox Freestand
Our standard foot can be attached to the side of the frame
For any further information about Tuffline® or any other product in this brochure please contact us:
Sydney
15 Chapel st Marrickville Sydney NSW 2204
T +61 2 8594 3555 F +61 2 9550 1462 E [email protected]
Brisbane
19 Chester Street Newstead Brisbane QLD 4006
T +61 7 3620 7600 F +61 7 3252 1228 E [email protected]
Canberra
61 Kembla Street Fyshwick Canberra ACT 2609
T +61 2 6280 6166 F +61 2 6280 6177 E [email protected]
Further Information
1800 606 [email protected]
