Clicks in secondsFlexible fit

TTX400

The value of lightingLighting contributes to the sense of well-being. In thetypical industrial environment good lighting increasesproductivity, improves quality and safety and reducesfatigue.The TTX400 light line supports these requirementswith its high quality and highly cost-effective design.

The experience of lightingLighting can enhance the shopping experience.The TTX400 can achieve this by its perfect light distribu-tion in a host of design configurations, allowing customers'attention to remain fully focused on the products.

Changes for the betterBuilding on the success of the earlier design, the newTTX400 has undergone major enhancements andrestyling, extending the trunking's areas of applicationwith the same ease of installation.The TTX400 remainsthe world's fastest, easiest trunking to install and you'llalways find it in stock at your local wholesalers.That'swhy, like the earlier version, it will remain a firm favoritewith installers. And the basic chassis remains the same,so adding to existing TTX400 light lines is no problem.

Success breeds success

4

1 2

5

3 4

1

2

3

4

Dedicated light distribution

New TL5 design

9 wires

LINESENSE

Changes for the better

MiniaturizationThe new range of TL5 reflectors has been optimizedaround the small TL5 lamp. Result: a true small design,making sure the TTX400 fits easily with your application.

OLC opticsWhere Philips developed the OLC (omnidirectionalluminance control) optics for recessed and surfacemounted luminaires, we now use the same optics forTTX400. OLC optics offer superb glare control andefficiency, making it possible to use the TTX400 inapplications like libraries and universities.

Dedicated light distributionBased on broad experience in shops, Philips developeddedicated reflector solutions for this segment. Forgeneral lighting the TL5 reflectors are optimized for theirlight output ratio, resulting in a higher general lightinglevel. For Do It Yourself shops new inlay reflectors focusthe light on the shelves, rather than on the floor, attractingthe customers attention to the products.

9 wiresAs well as the standard 5 and 7 pre-wired trunkings,TTX400 now offers 9 wires as a clicks only solution.This opens the possibility to easily combine emergencylighting with control functions like dimming or DALI (Digital Addressable Lighting Interface).

LINESENSELINESENSE is a smart integration of controls andTTX400. Offering a tool-less control solution resulting in a high level of comfort and maximum energy savings,especially in a distribution centre.

The new TTX400 has been built on the success of our earlier design.With a range of new products we providethe perfect solution for customizing your light application.

6

Perfect light distribution and a touch of style makeTTX400 light lines the ideal choice for large stores andhypermarkets.The slim elegant housing is designed tohold one or two lamps to provide varying illumination inone visually continuous light line. Giving maximum bright-ness where it’s required on the shelves. It‘s also possibleto mount spots on the trunking to provide accentlighting on, for example, special offers.

HypermarketsHigh lighting levels are the major requirement inhypermarkets – focusing attention on the products andcreating a bright stimulating shopping atmosphere.Thenew optimized TTX400 design with TL5 lamps boostslight output, allowing for much higher brightness levels

than with the earlier version, or the same brightness withfewer luminaires – saving installation and maintenancecosts and energy.

Do It YourselfThe optimized TL5 inlay reflectors create a bi-directionalbeam profile that puts the accent on the gondolas ratherthan the floor. And with its slim, stylish design, the TTX400 light line never intrudes, allowing customers’attention to remain fully focused on the products.

Enhancing the shopping experience

"Within the Gamma and Karwei DIY stores, we actively use light as a marketing tool. Together with Philips,

we developed a concept that results in a large and open impression of our shops.Thanks to TTX400's dedicated

TL5 reflector solutions, the client’s eye is attracted to our products, rather than to the rest

of the interior. Giving it our products the attention we want them to have, from top to bottom shelf."

Top photo: Gamma,Weert,The Netherlands. Insert: Mr. Nico de Jong, Karwei,Valkenswaard,The Netherlands.

Mr. N. de Jong, Manager Shop Interior, Intergamma:

8

1

1

2

3

4

LINESENSE, the 6th click

Pre-wired LINESENSE control unit

Mounting bracket for movement detector

Movement detector

"Philips' TTX400 trunking system with its 9 wires was the first choice for Royal Mail's new postal distribution

centre in Daventry (UK), because it offered them the facility to automatically test their emergency lighting without

the necessity for someone to physically walk around to inspect each emergency luminaire. A control panel allows

them to check the functionality and record the results of their emergency lighting for any part of the building

at any time."

Top photo: Ikea warehouse,The Netherlands. Insert: Royal Mail, United Kingdom.

9

2 3 4

Philips’ fully-automated LINESENSE lighting controlsystem can be integrated into the TTX400 light line tosave energy by automatically dimming or switching offthe lighting when nobody is present. Specifically designedfor light lines, LINESENSE provides movement-activatedlight regulation/switching and can be set to switch on/offfor maximum economy or to dim to 3% to allow energysaving and fast switch-on. Ensuring people never have tomove through dark areas, especially at night – boosting

confidence and comfort. For maximum flexibility,LINESENSE can also be combined with DALI to allowdimming to predetermined levels (10%, 20% or 30%),daylight regulation and manual control.

Easy to install by being simply clicked between thetrunking and the electrical hook-up, LINESENSE worksfully automatically and requires no extra maintenance.

Automatic lighting control with LINESENSE

Expanding possibilities with the 9 wire optionThe TTX400 can accommodate virtually any electricalconfiguration you might require.The standard trunkingsections come pre-wired with 5 or 7 wire flat ribboncable. But you can also choose a 9 wire version, allowingyou to combine emergency lighting with other controlfunctions such as dimming, emergency-light testing oradvanced lighting management tools such as DALI without the need to install extra wiring.

What’s more, simple click connectors mean that evenwith the extra wiring, the TTX400 is still the fastest andeasiest trunking to install.

10

1

2

Matt OLC optic

High-gloss OLC optic

11

Throwing light on public spacesThe enhanced features of the new TTX400 also make itideal for lighting indoor public spaces such as librariesand public galleries.With its slim, stylish TL5 design, highlight output and optimized lighting distribution, the newtrunking system is an attractive alternative to standardluminaires traditionally used in these applications.

Enhanced visual comfortThe all-round high performance of the TTX400’s newoptics (based on Philips’ proprietary OLC technology)offers optimum light distribution and efficiency withexcellent glare control fully complying with EN12464-1norms for working spaces. Enhancing visual comfort andcreating a pleasant, relaxing environment.

Variable light coverage Interior designers will also be attracted by the possibilityto vary light coverage along a continuous light line usingone or two lamps in the same housing and with thesame optics. Allowing light levels to be adapted whereneeded, for example, in library reading areas which needmore light than the bookshelves.

1 2

12

1 2 3

With click-only assembly, each trunking section is installed in seconds.

Click secures the section to the suspension bracket.

Click connects the sections mechanically and electrically.

Click mounts the electrical unit.

Click fits the reflector to the electrical unit.

Click connects the power supply.

One extra click is all that’s needed if the 9 wire version is chosen.

Not only does it click together in seconds, but it can be dismantled just asquickly for maintenance, changing reflectors and switching from 1 lamp to2 lamps, and for re-routing a light line to accommodate, for example,changes in shop layout.

Clicks in seconds –designed with installers in mind

1

2

3

4

5

Suspension bracketsPage 25

TrunkingsPage 14 - 15

Electrical unitsPage 16 - 17

ReflectorsPage 18 - 21

Inlay reflectorsPage 18 - 19

Louvres and opticsPage 18 - 19

13

4 5

TL5 TL-D

TTX400 5 wire

TMX400 1 49

GMX5.. white

1-lamp TL51-lamp TL5 EL

- wide beam- medium beam

GGX555 ..

- bidirectional- asymmetrical

GGX45. ..

- narrow beam- asymmetric- wide beam

- bidirectional

GGX555 ..

- white louvre- flat profiled aluminium

- high-gloss parabolic lamella- matt parabolic lamella

- prismatic panel

GGX450 ..

- white louvre- flat profiled aluminium

- matt parabolic lamellea- perforated louvre

- mesh louvre- high-gloss parabolic lamella

- semi-high-gloss parabolic lamella- prismatic panel

GMX5.. aluminium

- wide beam- narrow beam

- ultra narrow beam- asymmetric beam

- wall washer

GMX4.. white

- standard- slotted

- perforated

GMX4.. aluminium

- wide beam- narrow beam

- very narrow beam- ultra narrow beam- asymmetric beam

- wall washer

TMX400 2 49 TMX400 1 58 TMX400 2 58 TMX40. 58

TTX400 7 wire TTX400 9 wire TTX400 5 wire TTX400 7 wire TTX400 9 wire

2-lamp TL52-lamp TL5 EL

1-lamp TL-D1-lamp TL-D EL

2-lamp TL-D2-lamp TL-D EL

- projectors- halogen spots

TMX40. 49

- projectors- halogen spots

5 x 2.5 mm2 7 x 2.5 mm2 9 x 2.5 mm2 5 x 2.5 mm2 7 x 2.5 mm2 9 x 2.5 mm2

ZTX400

– Five clicks only1 5

14

Trunking TL-D

packaging

click

Trunking selectionfamily code length wiringTTX400 362 5

363 7581 9*582 9T**583

Dimensionstype length A type length A (mm)

581 1528362 2457 582 3057363 3686 583 4586

49

A 125.5 63

Maximum suspension distancedistance between suspension brackets

type 493 - 543 - 583 492 - 542 - 582Bare without attachments ≤ 3 m ≤ 2.25 mWith reflector and louvre ≤ 2.5 m ≤ 2 m

Trunking TL-D / TL5

trunking accessories

Trunking sections are the basis for fast installation. One click movement establishes themechanical and electrical connection.The length of the TL-D trunking sections perfectlymatches that of the TL-D electrical units to ensure exact electrical fitting. Pre-wired trunkingsections are available with 5, 7 or 9 wires. Unwired sections are also available to increase theflexibility in positioning the electrical units. Trunking sections are made of galvanized white steel.

Type number example:TTX400 581 7* 9 = 7 standard flat ribbon cables + 2 standard hardcore cables** 9T = 7 standard flat ribbon cables + 2 twisted-pair cables, to be used in communication

5 wires

7 wires Solution for dimming or DALI or emergency lighting.

9 wires Solution for acombination of emergency lighting, dimming or DALI.

Mechanical and electricalconnection in one click.

Electrical connectionensuring through wiring.

Pre-installed clips inside thetrunking can carry extracables.

Integrated phase selector. ZTX400 CM 300 mmmiddle of the line connec-tion unit for 5 or 7 wires.

ZTX400 CL Connectionunit to be used forthrough-wiring at the endof an interrupted line.

ZTX400 EP-PHL End plateto cover the trunking.Includes knock out hole of20 mm.

Dedicated packaging withpolystyrene (PS) end capsensures stable palletisation.

Trunkings are individuallypacked in foil. Heldtogether by PS protection.

Cutting PS protectionresults in 2 individuallypacked trunkings.

PS protection has beendeveloped to ensurevertical storage.

15

Trunking TL5

Dimensionstype length A type length A (mm)491 1474 541 1174492 2949 542 2348493 4424 543 3524

49

A 125.5 63

mains connection

9 wires

unwired trunking

ZTX400 CU Mains connection via connection unit at thebeginning of the line. Fast installation ensured via the clickconnection. Suitable for 5 or 7 wires. Strain relief included.

Unwired trunking sections allow the electrical units to be located at any desired position.The mains can be connected using the ZTX400 TC connector.Electrical units can be connected using the ZTX400 DC connectors.The requiredwiring inside the trunking can be fixed with internal cable clips.The trunking isdelivered with mechanical coupling pieces.The unwired trunking is available in two standard lengths:TTX410 582 and TTX410 583.

Alternative, more aesthetic mains connection, using a standardelectrical connector. Knock outs in trunking and end caps enablethe mains wires to enter the trunking. Dedicated trunking e.g.TTX400 491 CU7 with knock outs. Kit: electrical connector,end plate and 2 cable glands e.g. ZTX400 EP-CU7.

One click movement establishes the mechanical and electrical connection.The length of theTL5 trunking sections perfectly matches that of TL5 electrical units to ensure exact electricalfitting. Pre-wired trunking sections are available with 7 or 9 wires.Trunking sections are madeof galvanized white steel.

Trunking selectionfamily code length wiringTTX400 491* 7***

492* 9****493* 9T*****541**542**543**

Type number example:TTX400 541 7* Length 49W = 35W = 80W** 54W = 28W*** 2.5 mm2 flat ribbon cable**** 9 = 7 standard flat ribbon cables + 2 standard hardcore cables***** 9T = 7 standard flat ribbon cables + 2 twisted-pair cables, to be used in communication

A. For dimming in combination with emergency lighting with a local battery.The 8th and 9th wires will be standard hard core. (9)

B. For emergency lighting with a local battery in combination with testingfacilities of the emergency lighting, the 8th and 9th wires will be twisted pairs,to be used for communication. (9T)

C. For DALI in combination with emergency lighting with local batteries, the 8th

and 9th wires will be twisted pairs, to be used for the DALI communication. (9T)D. The 9 wire solution can be extended to 11 wires on a project bases.

TTX410 Unwired trunkingsection.

ZTX400 DC 5-poleconnector for electrical unitsin the TTX410 to enablethrough-wiring.

ZTX400 TC 7-pole mainsconnector for the TTX410.Including strain relief.

type length A (mm)TMX400 36W 1228TMX400 58W 1528

16

Electrical units TL-D

Electrical unit TL-D selectionfamily code lamp gearTMX400 1xTL-D36W I

2xTL-D36W IC1xTL-D58W HFB2xTL-D58W HFP

HFP M/SHFR

HFD (DALI)

Dimensions

Electrical units TL-D / TL5

A

97

24

63

97

114

63

97

63

32

Earth

N2N1L3

L2L1N3

dedicated solutions

The electrical units are designed for fast installation. A simple click mounts the units onto the trunking. During this click, a connection block on the unit connects it to the mains in thetrunking. Electrical units can be used on the TTX400 pre-wired or on the unwired TTX410trunkings. Emergency lighting versions are available, see page 24.

1-lamp TL-D electrical unit

2-lamp TL-D electrical unitStandard distance betweenthe lampholders is 114 mm.

2-lamp TL-D electrical unitF32 Distance between thelamp holders is 32 mm.Thismakes it possible to use it inI-lamp reflector (available inIC, HFB, HFP and HFR andEL3 versions, e.g.TMX4002xTL-D58W HFP F32).

installation

3 Phases, 3 Neutrals.Standard installations are done using 3 phases and 1 neutral. Butsolutions with 3 phases and 3 neutrals are possible upon request:standard trunking can be used in combination with 3 dedicatedelectrical unit types.

The electrical unit is clickedonto the trunking.

To dismount the electricalunit, turn the locker.

Contact blocks of electricalunit and trunking click intoeach other.

(mm) (mm) (mm)

Type number example:TMX400 1xTL-D58W HFB

17

Electrical units TL5

Electrical unit TL5 selectionfamily code lamp gearTMX400 1xTL5-28W HFP

2xTL5-28W HFR1xTL5-54W HFD (DALI)**2xTL5-54W1xTL5-35W2xTL5-35W1xTL5-49W2xTL5-49W1xTL5-80W

2xTL5-80W*

Blind cover selectionfamily code blind cover wattageZTX400 BC 36

584954

type length A (mm)TMX400 28W - 54W 1174TMX400 35W - 49W - 80W 1474

Dimensions

A91

.5

20

63

91.5

46

63

Type number example:TMX400 2xTL5-49W HFR* HFP only** upon request

BALLAST

BALLAST

TL5 technology in the electrical units TMX400 offers many advantages compared with TL-Dsolutions.The higher efficiencies save energy and costs. Increased flexibility in lamp choicefrom high-efficiency (28W and 35W) to high output lamps (49W, 54W and 80W).High output lamps will reduce the number of electrical units to be used, and thus installationand maintenance time. Emergency lighting versions are available, see page 24.

1-lamp TL5 electrical unit

2-lamp TL5 electrical unit

blind cover selection

Double switchingIn 2-lamps solutions with continuous light lines, 2 separate circuitscan be created.This offers the possibility of switching both lamp-rows separately.This is done via master-slave (M/S) technology.Standard trunking can be used in combination with sets ofdedicated M/S electrical units.Two additional connectors between the M/S units are included. Available upon request.

Blind covers are used toclose the trunking in caseswhere no electrical unit ismounted.

0 lm28W1L

54W1L

28W2L

54W2L

35W1L

49W1L

80W1L

35W2L

49W2L

80W2L

2.000 lm

4.000 lm

6.000 lm

8.000 lm

10.000 lm

Lamp power

12.000 lm

Luminous flux at 25°C ambient temperature

System length 1174 mm System length 1474 mm

(mm) (mm)

18

White reflectors TL-D

Light Output Ratio’s white reflectorsTL-D LOR LOR TL5GMX430 1 58 81 90 GMX555 WB 1 49GMX430 2 58 75 80 GMX555 WB 2 49GMX450 1 58 72 85 GMX555 MB 1 49GMX450 2 58 72 72 GMX555 MB 2 49GMX450 1 58 + GGX454 C-BD 82 95 GMX555 49 MB C-BD20GMX450 2 58 + GGX454 C-BD 82 81 GMX555 49 MB C-BD20

White reflector selection TL-Dfamily code lamp version descriptionGMX430 36* (-) standard

58*GMX450 1 36 (-) standard

2 36 RS slotted1 58 RP perforated2 58

Inlay reflector selection TL-D for GMX450*family code lamp version descriptionGGX451 1 36 M-NB narrow beam

1 58GGX452 1 36 M-WB wide beam

1 58GGX450 1 36 A asymmetric

1 58GGX453 2 36 M-WB wide beam

2 58GGX454 2 58 C-BD bidirectional

White reflectors TL-D / TL5

The TL-D range of white reflectors is in two parts: basic and multi-purposereflectors.The basic white reflector is an economic and efficient solution.The multi-purpose reflectors can be combined with additional inlay reflectors,louvres and optics. All white reflectors are made of pre-painted galvanized steel.

GMX430 58 Basic whitereflector. Suitable for 1 or 2lamps.

GMX450 Multi-purposereflector. Dedicatedreflectors for 1 or 2 lamps.

GMX450 RS Slotted reflec-tors provide 5% upwardlighting. Slots cause air flowthrough the reflector.

GGX450 L White lamellalouvre.

Coupling piece for whitereflectors. Dedicatedversions per reflector type.Available in white plasticand in transparent plasticfor perforated reflectorse.g. ZTX400 CP-450,ZTX400 CP-430.

White plastic end plates.Dedicated versions perreflector type e.g. ZTX400EP-450, ZTX400 EP-430.

Aluminium inlay reflectorsimprove the LOR and thedistribution in theGMX450.

GGX450 P Prismatic panel.For easy cleaning and lowluminance.

Type number example: GMX450 1 58 RS* Suitable for 1 or 2 lamps

Type number example: GGX453 2 58 M-WB* TL-D inlay reflectors are delivered separately

Louvre and optic selection TL-D for GMX450family code lamp version descriptionGGX450 1 36 L white louvre

2 36 M2 flat profiled aluminium1 58 M5 matt parabolic lamella2 58 LP perforated louvre

ML mesh louvreC6 high gloss parabolic lamellaD6 semi-high gloss parabolic lamellaP prismatic panel

Type number example: GGX450 2 58 L

GMX555 WB Very smallwide beam white reflectorfor general lighting.

GMX555 MB Whitereflector with delta shapelight distribution.

19

White reflectors TL5

Dimensions white reflectors (mm)TL-D TL5

nr. lamps dimensions dimensions nr. lamps1 2 w h h w 1 2

GMX430 • • 220 90 60.5 147 • • GMX555 WBGMX450 • 176 94 76.5 147 • • GMX555 MB

• 240 94 76.5 147 • •• 176 94

• 240 94

Thanks to the miniaturized TL5 lamps, the TL5 reflector range offers smallsolutions to enhance the design and LOR compared with TL-D solutions.The TL5range of white reflectors is in two parts: medium-beam and wide-beam reflectors.The wide-beam reflector is optimized for general lighting.The medium-beamreflectors can be combined with additional inlay reflectors, louvres and OLC optics. All white reflectors are made of pre-painted galvanized steel.

Aluminium inlay reflectorsimprove the LOR and thedistribution.

Inlay reflectors are deliveredas a set with the whitereflectors, already mounted.

The TL5 white reflectors are suitable for 1 lamp and 2 lamps.Result: lines with both 1 and 2 lamps form a visually straight light line.

Plastic end platesDedicated versions perreflector type e.g.ZTX400 EP-555-WB,ZTX400 EP-555-MB.

Plastic coupling pieceDedicated versions perreflector type e.g.ZTX400 CP-555-WB,ZTX400 CP-555-MB.

GGX555 L White lamellalouvre. Suitable for MB andWB reflectors.

w

h

A comparison of TL-D and TL5 reflectors shows that the TL5 reflectors are smaller.The smaller TL5 reflectors have a modern design to fit more easily into applications.

Type number example: GMX555 54 MB C-A20 SET* the GMX555 reflectors are suitable for 1 or 2 lamps** TL5 inlay reflectors are delivered as a set with the GMX555 MB reflector, already mounted

White reflector TL5 selectionfamily code lamp light distribution descriptionGMX555 49* WB wide beam

54* MB medium beamMB RP medium beam perforated

Type number example: GMX555 49 MB* the GMX555 reflectors are suitable for 1 or 2 lamps

Louvre and optic selection TL5 for GMX555family code lamp version descriptionGGX555 49 L* white louvre

54 M2* flat profiled aluminiumC6** high gloss parabolic lamellaC6T** high gloss parabolic lamella with top reflectorM6** matt parabolic lamellaP prismatic panel

Type number example: GGX555 54 M6* suitable for wide beam (WB) and medium beam (MB) reflectors** suitable for medium beam (MB) reflector only

White reflector TL5 selection with inlay reflectorsfamily code lamp light distribution descriptionGMX555 49* MB C-BD20 SET** bidirectional, max at 20°

54* MB C-BD40 SET** bidirectional, max at 40°MB C-A20 SET** asymmetrical, max at 20°MB C-A40 SET** asymmetrical, max at 40°

GGX555 C6 High glossOLC optics for GMX555MB top reflectors areavailable to increase LOR.

20

Aluminium reflectors TL-D

Aluminium reflectors offer a higher LOR than white reflectors.They are availablein a range of versions from wide-beam (matt or hammer bow) to very narrow(high gloss).Typical applications are general lighting for industries, warehouses andDIY shops. Hammer bow reflectors offer a higher LOR and better glare factorthan matt material. High gloss material is used to achieve very narrow beamswith maximum efficiency.

Wide beame.g. GMX466 2 58 M-WB

Narrow beame.g. GMX465 1 58 M-NB

Very narrow beame.g. GMX470 1 58 C-NB

Asymmetrical beame.g. GMX467 1 58 M-A

Wall washere.g. GMX466 2 58 HB-A

Aluminium reflector selection TL-Dfamily code lamp light distribution material descriptionGMX466 2 58 M-WB matt wide beam

HB-WB hammer bowGMX465 1 58 M-NB matt narrow beam

2 58 HB-NB hammer bowGMX460 1 58 C-NB high gloss very narrow beamGMX470 1 58 C-NB high gloss ultra narrow beam

HB-NB hammer bowGMX467 1 36 M-A matt asymmetric beam

1 58GMX466 2 58 HB-A hammer bow wall washer

Aluminium reflectors TL-D / TL5

Light Output Ratio’s aluminium reflectorsTL-D TL5

nr. lamps material LOR LOR material nr. lamps1 2 M HB C M HB C 1 2

GMX466 • • 80 84 • • GMX566• • 83 87 • •

GMX465 • • 84 88 • • GMX565• • 88 93 • •

• • 76• • 81 90 • •

GMX470 • • 86 95 • • GMX570• • 89 98 • •

85 • •90 • •

Type number example: GMX466 2 58 HB-WB

wattage length A (mm)36W 122458W 1524

Dimensions

A

21

Aluminium reflectors TL5

Because of the small size of the TL5 lamps, the TL5 aluminium reflector rangeoffers smaller versions than the TL-D range.TL5 reflectors also offer increasedLOR.Typical TL5 applications are shops.With the introduction of the 80W and 2 x 80W gear in combination with highly efficient aluminium reflectors,TL5 isnow also attractive in industrial environments.

w

h

Wide beame.g. GMX566 2 49 HB-WB

Narrow beame.g. GMX565 1 49 M-NB

Ultra narrow beame.g. GMX570 49 C-NB

Asymmetrical beame.g. GMX567 49 M-A

Wall washere.g. GMX566 49 HB-A

Aluminium reflector selection TL5family code lamp light distribution material descriptionGMX566 2 49 M-WB matt wide beam

2 54 HB-WB hammer bowGMX565 1 49 M-NB matt narrow beam

2 49 HB-NB hammer bow1 542 54

GMX570 49* C-NB high gloss ultra narrow beam54* HB-NB hammer bow

GMX567 49* M-A matt asymmetric54*

GMX566 49* HB-A hammer bow wall washer54*

Dimensions aluminium reflectors (mm)TL-D TL5

nr. lamps dimensions dimensions nr. lamps1 2 w h h w 1 2

GMX466 • 244 107 59 102 • GMX566GMX465 • 233 101 101 233 • • GMX565

• 329 153GMX470 • 308 168 93 221 • • GMX570GMX467 • 258 89 89 258 • • GMX567

TL5 reflectors are smaller than the TL-D versions.This can be an advantage when onlylimited space is available (e.g. sprinkler installations)

Type number example: GMX566 2 54 HB-WB* for 1 or 2 lamps

wattage length A (mm)35W - 49W - 80W 147428W - 54W 1174

Dimensions

A

22

Projectors

The combination of general lighting and accent lighting is especially attractive in hypermarketsand supermarkets. For these applications, the TTX400 system can be equipped withprojectors.The electrical units for the projectors are simply clicked into the trunking, and caneasily be replaced with a standard electrical unit for TL lamps. Dedicated electrical units areavailable to mount low-voltage halogen spots. More common is the use of projectors, directlyclicked into a 3 circuit rail, or mounted via a spot bracket.

X,T or L -crossings

The pre-wired structure facilitates the creation of X,T or L -crossings of trunkings.The ZTX400 CPX is delivered with integrated coupling pieces, blind covers and end plates.

1528

400 400 400164 164

ZTX400 BP-SPOT Bracket for projectors with CDM-T /SDW-T lamps such as the 60800 or Monza.The bracketincludes a RCS750 base plate and a cable for external electricalconnection.

TMX405 58-4 Electrical unit with 4 Express connection points for low-voltage halogen spots.This unit has 2 built-in 12V - 105W transformers.

1528

736396 396

TMX407 58 3C Electrical unit with an integrated 3-circuit rail.Standard projectors can be mounted in the rail.Maximum weight of the mounted projectors is 9 kg.

X-part T-part L-part

ZTX400 CPX

1528

750389 389

TMX403 58-2 Electrical unit with 2 connection points for projectors with e.g. CDM-T or SDW-T lamps.The projectors are mounted with the spot bracket on the trunking.

(mm)

(mm)

(mm) (mm)

23

Linesense

With LINESENSE, TTX400 and controls are combined in one.The speed and ease of installation of TTX400 remains when LINESENSE is used. In addition, substantial energy savings up to 75% can be achieved. LINESENSE hasbeen developed for industrial applications like warehouses. For detailed information, a dedicated LINESENSE brochure is available.

TTX 400

Daylight linking

Switchon/offor dim to10, 20, 30%

Bestperformance

ZTX400MDU-D

Movement detection(detector LRM 8117)

7 wire

1

64

HFD****

300 m

4

0, 10, 20,or 30%

7 wire

60

HFR

125 m

2**

3%*

5 wire

***

HFP

125 m

2**

0

* minimum dim level of the ballast** 2 presence detectors or 3 with LED disabled*** any number of luminaires allowed by the TTX400 light line system**** HFD = HFR-DALI

TTX400-system

Maximum numberof ballasts per line

Type of ballast

Manual Control(on, off and override)

Number of light sensorsper control unit

Daylight linking(light sensor LRL 8102)

Maximum cable lengthfor movement detector

Maximum number ofpresence detectorsper control unit

Minimum light levelwithout presence

ZTX400MDU-P

ZTX400MDU-R

Bestalternative

Besteconomy

Switchon/off

Dim level 3%

Movement detectionManual override

LINESENSE consists of a 618 mm piece of trunking, which is fully pre-equipped and wired to beadded to the trunking.The control function is integrated into this extra unit, and can easily beclicked between the light line and the electrical connection unit. High bay movement detectors areconnected with standard RJ-12 cables and mounted at the right location with the use of dedicatedbrackets. LINESENSE is equipped as standard with a telejack splitter to easily connect the detectorsto the light line.

ZTX400 MB-MDUMounting bracket formovement detector LRM 8117/00.

LRM 8117/00 High baypassive infrared movementdetector. Mounting heightup to 15 m.

Installation: clicks only1 ZTX400 MDU control unit clicks onto the trunking.2 Movement detector clicks on the bracket.3 ZTX400 MB-MDU Bracket clicks on the trunking.4 Telejack cables click the detector and control unit together.5 ZTX400 CU mains connection clicks on the control unit.

ZTX400 MDU Pre-wiredLINESENSE unit withintegrated control function.

24

Emergency lighting

Non-centralized emergency lighting (EL) in the TTX400 is performed via electrical unitsequipped with batteries and invertors. Depending on the invertor, a 3 hour or 1 houremergency lighting solution is provided. Fully pre-equipped EL electrical units save installationtime. In line with the TTX400 philosophy, the EL solutions are also clicks only.

Decentral emergency lighting with non dimming gear

TTX400 solutions without dimming can be equipped with ELusing standard TTX400 trunking with 7 wires.The poles NNand LL are used to connect the EL. 1 or 3 hour EL solutionscan be chosen.

Type number example:TMX400 2xTL5-49W HFR 9 EL3

Decentral emergency lighting with dimming gear

Emergency lighting automatic test system

As a result of legislation, responsibility for fire safety lies with the directors of business and withbuilding operators.This leads to a requirement for regular testing of emergency lighting luminaires.Testing can be done manually via visual control. But thanks to the integration of intelligent invertorsand the TTX400, emergency lighting testing can be done automatically via interfaces and a computer.Simple software allows a time interval to be chosen to check the EL.The results are stored in a logbook. Dedicated electrical units are needed together with the TTX400 9 wire version (8th and 9th

wires are twisted: 9T). Emergency lighting automatic test systems are available on request.

Electrical unit selection using 9 wires EL and HFRfamily code lamp gear wiring ELTMX400 1xTL5-49W HFR 9 EL3

2xTL5-49W1xTL5-54W2xTL5-54W1xTL5-80W2xTL5-80W1xTL-D58W2xTL-D58W

Electrical unit selection using 7 wires and ELfamily code lamp gear ELTMX400 1xTL5-35W I EL1

2xTL5-35W IC EL31xTL5-49W HFB2xTL5-49W HFP1xTL5-54W2xTL5-54W1xTL5-80W2xTL5-80W1xTL-D58W2xTL-D58W1xTL-D36W2xTL-D36W

TTX400 solutions with dimming (HFR) can be equipped withEL using TTX400 trunking with 9 wires.The poles NN and LLfrom the standard flat ribbon cable are used to connect the EL.The additional 8th and 9th hard-core wires are pre-mounted inthe TTX400 and used to provide the (0-10V) dimming circuit.The dimming gear is equipped with dedicated wiring with aconnector to click into the T splitter in the trunking.

8th and 9th wire: tool-lessthrough-wiring via click.

All EL versions of the TTX400 are easily mounted: clicks only.Dimming and emergency lighting: 3 phases and EL viastandard connector.The 0-10V line of the HFR gear to the through-wiring in the trunking is via extra connector.

Detail: Connectors toconnect 0-10V line of theHFR gear to the through-wiring in the trunking.

TTX400 9T, 8th and 9th

wires are a twisted pair.LEDs to check theemergency lighting visually.

Type number example:TMX400 2xTL5-49W HFP EL3

25

Accessories

A range of accessories is available for TL-D and TL5 solutions.

Mounting bracket clicked onto the trunking.TTX400 as carrier forextra cables, using theZTX400 ECC.

Plastic cable duct ZTX400CD582 on top of TTX400.

TTX410 being used ascable duct on top of TTX400.

ZTX400 EC Electricalconnector to connect nonTTX400 luminaires ontopre-wired TTX400,including strain relief.

ZTX400 CD582 Cableduct on top of TTX400,to be closed with ZTX400BC. In combination withZTX400 CCD.

ZTX400 ECC Cable clipon top of the TTX400trunking.

ZTX410 ICC Internalcable clip to fix cablesinside the unwiredTTX410.

ZTX400 IP 40 Plastic ringsto add on the lampholders to upgrade thesystem to IP 40.

ZTX400 LB Bracket toconnect TCW196 orTCW596 on the TTX410.

ZTX400 MB Bracket tomount TTX400 directly tothe ceiling.

ZTX400 PB Bracket tomount TTX400 on systemceilings with 24 mm T-profiles.

ZTX400 UB Bracket tosuspend TTX400 withthreaded rods up to M13.

ZTX400 CB Bracket tosuspend TTX400 fromchains or steel cables.

ZTX400 UCD Bracket tobe used in combinationwith cable ducts.Suspension via threadedrods up to M13.

ZTX400 CCD Bracket tobe used in combinationwith cable ducts.Suspension via chains orsteel cables.

ZTX400 SMS Suspensionbracket to be used in com-bination with M1.5 steelcable.Tool-less mounting,tool-less adjustment ofmounting height.

ZTX400 CH Adjustablesuspension hook, to beused in combination withZTX400 UB, UCD orCDB.

ZTX400 BR6 Universalbracket to mount luminairesonto the TTX410. M6suitable.

ZTX400 CDB Suspensionbracket to be used for TTX400 using TTX410 asa cable duct.

ZTX400 LB-FR Bracket tomount 1 lampTCW215/216 andTCW596 onto TTX410.

ZTX400 WB-FR Bracketto mount surface-mountedluminaires or 2 lampsTCW215/216 on to theTTX410.

accessories solutions

26

Ordering table TTX400 TL-DLength* Electrical Suspension Trunking Trunking Reflectors** Accessories white Louvres &

units** parts accessories reflectors** optics*****581 582 583 Mains End Aluminium**** Reflector Reflector

connection unit piece or white end plates coupling piece[m] TMX400 TL-D ZTX400 .. TTX400 ZTX400 CU*** ZTX400 EP-PHL GMX4.. ZTX400 EP-4.0 ZTX400 CP-4.0 GGX450 ..

1.67 1 2 1 1 1 1 2 0 13.20 2 2 1 1 1 2 2 2 24.73 3 2 1 1 1 3 2 4 36.26 4 3 2 1 1 4 2 6 47.78 5 4 1 1 1 1 5 2 8 59.31 6 4 2 1 1 6 2 10 6

10.84 7 5 2 1 1 1 7 2 12 712.37 8 5 1 2 1 1 8 2 14 813.90 9 6 3 1 1 9 2 16 915.43 10 6 2 2 1 1 10 2 18 1016.96 11 7 1 3 1 1 11 2 20 1118.49 12 7 4 1 1 12 2 22 1220.01 13 8 2 3 1 1 13 2 24 1321.54 14 8 1 4 1 1 14 2 26 1423.07 15 9 5 1 1 15 2 28 1524.60 16 9 2 4 1 1 16 2 30 1626.13 17 10 1 5 1 1 17 2 32 1727.66 18 10 6 1 1 18 2 34 1829.19 19 11 2 5 1 1 19 2 36 1930.71 20 11 1 6 1 1 20 2 38 2032.24 21 12 7 1 1 21 2 40 2133.77 22 12 2 6 1 1 22 2 42 2235.30 23 13 1 7 1 1 23 2 44 2336.83 24 13 8 1 1 24 2 46 2438.36 25 14 2 7 1 1 25 2 48 2539.89 26 14 1 8 1 1 26 2 50 2641.42 27 15 9 1 1 27 2 52 2742.94 28 15 2 8 1 1 28 2 54 2844.47 29 16 1 9 1 1 29 2 56 2946.00 30 16 10 1 1 30 2 58 30

Ordering tables

Ordering table TTX400 TL5Length* Electrical Suspension Trunking Trunking Reflectors** Accessories white Louvres &

units** parts accessories reflectors** optics*****491 492 493 Mains End Aluminium**** Reflector Reflector

connection unit piece or white end plates coupling piece[m] TMX400 TL5 ZTX400 .. TTX400 ZTX400 CU*** ZTX400 EP-PHL GMX5.. ZTX400 EP-555 .. ZTX400 CP-555 .. GGX555 ..

1.62 1 2 1 1 1 1 2 0 13.09 2 2 1 1 1 2 2 2 24.57 3 2 1 1 1 3 2 4 36.04 4 3 2 1 1 4 2 6 47.51 5 3 1 1 1 1 5 2 8 58.99 6 4 2 1 1 6 2 10 6

10.46 7 4 2 1 1 1 7 2 12 711.94 8 5 1 2 1 1 8 2 14 813.41 9 6 3 1 1 9 2 16 914.89 10 6 2 2 1 1 10 2 18 1016.36 11 7 1 3 1 1 11 2 20 1117.84 12 7 4 1 1 12 2 22 1219.31 13 8 2 3 1 1 13 2 24 1320.79 14 8 1 4 1 1 14 2 26 1422.26 15 9 5 1 1 15 2 28 1523.74 16 9 2 4 1 1 16 2 30 1625.21 17 10 1 5 1 1 17 2 32 1726.69 18 10 6 1 1 18 2 34 1828.16 19 11 2 5 1 1 19 2 36 1929.64 20 11 1 6 1 1 20 2 38 2031.11 21 12 7 1 1 21 2 40 2132.59 22 12 2 6 1 1 22 2 42 2234.06 23 13 1 7 1 1 23 2 44 2335.54 24 13 8 1 1 24 2 46 2437.01 25 14 2 7 1 1 25 2 48 2538.49 26 14 1 8 1 1 26 2 50 2639.96 27 15 9 1 1 27 2 52 2741.44 28 15 2 8 1 1 28 2 54 2842.91 29 16 1 9 1 1 29 2 56 2944.39 30 16 10 1 1 30 2 58 30

* length including ZTX400 CU** ordering table is based on a continuous light line, for maximum number of

electrical units per mains connection please check the table on page 27*** alternative mains connection is possible, see page 15**** reflector coupling pieces for aluminium reflectors are delivered with the reflectors***** optional

27

Maximum permissible number of electrical units at maximum installation length (m)Luminaire Circuit Breaker B 16A Circuit Breaker C 16A230V 50Hz 1 phase 3 phases 1 phase 3 phases

Maxi. Maxi. Maxi. Units Maxi. Maxi. Maxi. Maxi. Units Maxi.Power Type Units Length L1 L2 L3 Total Length Units Length L1 L2 L3 Total Length

1xTL-D36W I 37 46 31 31 31 93 115 37 46 31 31 31 93 115IC 64 79 41 41 41 123 152 64 79 41 41 41 123 152

2xTL-D36W I 18 23 18 18 18 54 69 18 23 18 18 18 54 69IC or DUO 37 46 31 31 31 93 115 37 46 31 31 31 93 115

1xTL-D58W I 23 37 22 22 22 66 101 23 37 22 22 22 66 101IC 40 62 29 29 29 87 133 40 62 29 29 29 87 133

2xTL-D58W I 11 19 11 11 11 33 55 11 19 11 11 11 33 55IC or DUO 20 31 20 20 20 60 92 20 31 20 20 20 60 92

1xTL-D36W HFB 18 23 18 18 18 54 67 30 37 30 30 30 90 111HFP-HFR 28 35 28 28 28 84 104 47 58 47 47 47 141 174

2xTL-D36W HFB 18 23 18 18 18 54 67 30 37 30 30 30 90 111HFP-HFR 28 35 28 28 28 84 104 47 58 35 35 35 105 129

1xTL-D58W HFB 18 28 18 18 18 54 83 30 46 30 30 30 90 138HFP 28 43 28 28 28 84 129 47 72 36 36 36 108 166HFR 12 19 12 12 12 36 56 20 31 20 20 20 60 92

2xTL-D58W HFB-HFP-HFR 12 19 12 12 12 36 56 20 31 20 20 20 60 921xTL5-28W HFP-HFR 28 33 28 28 28 84 99 47 56 47 47 47 141 1662xTL5-28W HFP-HFR 28 33 28 28 28 84 99 47 56 47 47 47 141 1661xTL5-35W HFP-HFR 28 42 28 28 28 84 124 47 70 43 43 43 129 1912xTL5-35W HFP 28 42 28 28 28 84 124 47 70 32 32 32 96 142

HFR 12 18 12 12 12 36 54 20 30 20 20 20 60 891xTL5-49W HFP-HFR 28 42 28 28 28 84 124 47 70 37 37 37 111 1642xTL5-49W HFP-HFR 12 18 12 12 12 36 54 20 30 20 20 20 60 891xTL5-54W HFP-HFR 28 33 28 28 28 84 99 47 56 40 40 40 120 1412xTL5-54W HFP-HFR 12 15 12 12 12 36 43 20 24 20 20 20 60 711xTL5-80W HFP-HFR 12 18 12 12 12 36 54 20 30 20 20 20 60 89

Maximum number of electrical units per lineEl

ectr

onic

bal

last

sC

onve

ntio

nal b

alla

sts

European ordering codes TL5Description EOCTrunking TL5TTX400 491 7 29027099TTX400 492 7 29029499TTX400 493 7 29031799TTX400 491 9 68500799TTX400 492 9 68498799TTX400 493 9 68502199TTX400 491 9T 68386799TTX400 492 9T 68388199TTX400 493 9T 68390499TTX400 541 7 30502899TTX400 542 7 30504299TTX400 543 7 30506699TTX400 541 9 68506999TTX400 542 9 68504599TTX400 543 9 68508399TTX400 541 9T 68392899TTX400 542 9T 68394299TTX400 543 9T 68396699

TTX400 491 CU7 68518299TTX400 541 CU7 68512099

Electrical units TL5TMX400 1xTL5-49W HFP 29109399TMX400 2xTL5-49W HFP 29111699TMX400 2xTL5-49W HFP M-S SET 68423900TMX400 1xTL5-49W HFR 29113099TMX400 2xTL5-49W HFR 29115499TMX400 1xTL5-49W HFR 9 68406299TMX400 2xTL5-49W HFR 9 68408699TMX400 1xTL5-49W HFD 30331499TMX400 1xTL5-54W HFP 30472499TMX400 2xTL5-54W HFP 30474899TMX400 1xTL5-54W HFR 30480999TMX400 2xTL5-54W HFR 30482399TMX400 1xTL5-54W HFR 9 68410999TMX400 2xTL5-54W HFR 9 68412399TMX400 1xTL5-80W HFP 10545199TMX400 2xTL5-80W HFP 68366999TMX400 1xTL5-80W HFR 30564699

Description EOCElectrical units TL5 with ELTMX400 1xTL5-49W HFP EL3 29117899TMX400 2xTL5-49W HFP EL3 29119299TMX400 1xTL5-49W HFR 9 EL3 68418599TMX400 2xTL5-49W HFR 9 EL3 68420899TMX400 2xTL5-80W HFP EL3 68526799

White reflectors TL5GMX555 49 MB 68455099GMX555 49 WB 68451299GMX555 54 MB 68457499GMX555 54 WB 68453699

White reflector + Inlay reflector TL5GMX555 49 MB C-A20 SET 68466600GMX555 49 MB C-A40 SET 68465900GMX555 49 MB C-BD20 SET 68463500GMX555 49 MB C-BD40 SET 68464200GMX555 54 MB C-A20 SET 68469700GMX555 54 MB C-A40 SET 68470300GMX555 54 MB C-BD20 SET 68467300GMX555 54 MB C-BD40 SET 68468000

Optics TL5GGX555 49 L 68471099GGX555 49 M2 68473499GGX555 49 M6 68481900GGX555 49 C6 68482600GGX555 49 C6T 68524300GGX555 49 C-BD/A 68461199GGX555 54 L 68475899GGX555 54 M2 68477299GGX555 54 M6 68479600GGX555 54 C6 68480200GGX555 54 C6T 68525000GGX555 54 C-BD/A 68459899

Description EOCAluminium reflectors TL5GMX565 49 HB-NB 30546299GMX565 49 M-NB 30550999GMX566 49 HB-A 30518999GMX566 2 49 HB-WB 10966499GMX567 49 M-A 30558599GMX570 49 C-NB 29004199GMX570 49 HB-NB 30224999GMX565 54 HB-NB 30548699GMX565 54 M-NB 30552399GMX566 2 54 HB-WB 30554799GMX567 54 M-A 30556199GMX570 54 C-NB 30562299GMX570 54 HB-NB 30560899

LINESENSEZTX400 MB-MDU 30377299ZTX400 MDU-D 30324699ZTX400 MDU-P 30329199ZTX400 MDU-R 30327799LRM 8117/00 51847300

Ordering numbers

Note:Technical data, according maximum drop voltage 3%, maximum current 16A and maximum inrush current for circuit breaker B 16A or C 16A.

28

European ordering codes TL-DDescription EOCTrunking TL-DTTX400 581 5 09345199TTX400 582 5 09347599TTX400 583 5 09349999TTX400 581 7 09668199TTX400 582 7 09198399TTX400 583 7 09196999TTX400 581 9 68494999TTX400 582 9 68492599TTX400 583 9 68496399TTX400 581 9T 68380599TTX400 582 9T 68382999TTX400 583 9T 68384399

TTX400 581 CU7 68516899

Trunking TL-D for double switchingTTX400 581 2C5 68424699TTX400 581 2C7 68430799TTX400 582 2C5 68426099TTX400 582 2C7 68432199TTX400 583 2C5 68428499TTX400 583 2C7 68434599

Empty trunkingTTX410 582 09351299TTX410 583 09353699

Electrical units TL-DTMX400 1xTL-D58W I 09249299TMX400 2xTL-D58W I F32 68346199TMX400 1xTL-D58W IC 09253999TMX400 2xTL-D58W IC 30823499TMX400 2xTL-D58W IC F32 68348599TMX400 1xTL-D58W HFB 09277599TMX400 2xTL-D58W HFB 09281299TMX400 2xTL-D58W HFB M-S SET 68422200TMX400 2xTL-D58W HFB F32 68354699TMX400 1xTL-D58W HFP 09269099TMX400 2xTL-D58W HFP 09273799TMX400 2xTL-D58W HFP F32 68356099TMX400 2xTL-D58W HFP M/S 09862300

Description EOCTMX400 1xTL-D58W HFR 09285099TMX400 2xTL-D58W HFR 09194599TMX400 2xTL-D58W HFR F32 68358499TMX400 1xTL-D58W HFR 9 68402499TMX400 2xTL-D58W HFR 9 68404899TMX400 1xTL-D58W HFD 30335299TMX400 2xTL-D58W HFD 30337699

Electrical units TL-D with ELTMX400 1xTL-D58W IC EL3 68558899TMX400 1xTL-D58W IC EL1 68560199TMX400 2xTL-D58W IC EL3 68562599TMX400 2xTL-D58W IC EL1 68564999TMX400 2xTL-D58W IC EL3 F32 68566399TMX400 2xTL-D58W HFB EL3 30440399TMX400 2xTL-D58W HFB EL3 F32 68362199TMX400 1xTL-D58W HFP EL1 29080599TMX400 2xTL-D58W HFP EL1 28989299TMX400 1xTL-D58W HFP EL3 09575299TMX400 2xTL-D58W HFP EL3 09579099TMX400 2xTL-D58W HFP EL3 F32 68364599TMX400 1xTL-D58W HFR EL1 09627899TMX400 1xTL-D58W HFR 9 EL3 68414799TMX400 2xTL-D58W HFR 9 EL3 68416199

Electrical units for spotsTMX403 58-2 10148499TMX405 58-4 10150799TMX407 49 2C 30269099TMX407 58 2C 30090099TMX407 58 3C 10152199

White reflectors TL-DGMX430 58 09319299GMX450 1 58 09295999GMX450 1 58 RP 09311699GMX450 1 58 RS 09303199GMX450 2 58 09299799GMX450 2 58 RP 09315499GMX450 2 58 RS 09307999

Description EOCInlay reflectors TL-DGGX450 1 58 A 10164499GGX451 1 58 M-NB 09363599GGX452 1 58 M-WB 09367399GGX453 2 58 M-WB 09409099GGX454 2 58 C-BD 30200399

Optics TL-DGGX450 1 58 L 09379699GGX450 1 58 LP 09375899GGX450 1 58 M2 09383399GGX450 1 58 M5 09387199GGX450 1 58 ML 09371099GGX450 1 58 P 10156999GGX450 2 58 L 09204199GGX450 2 58 LP 09395699GGX450 2 58 M2 09401499GGX450 2 58 M5 09405299GGX450 2 58 ML 09391899GGX450 2 58 P 10160699

Aluminium reflectors TL-DGMX460 1 58 C-NB 09355099GMX465 1 58 HB-NB 09728299GMX465 1 58 M-NB 09695799GMX465 2 58 HB-NB 10239999GMX465 2 58 M-NB 10241299GMX466 2 58 HB-WB 09333899GMX466 2 58 M-WB 09327799GMX467 1 58 M-A 09359899GMX470 1 58 C-NB 10104099

LINESENSEZTX400 MB-MDU 30377299ZTX400 MDU-D 30324699ZTX400 MDU-P 30329199ZTX400 MDU-R 30327799LRM 8117/00 51847300

European ordering codes accessoriesDescription EOCAccessoriesZTX400 BC49 29010299ZTX400 BC54 30573899ZTX400 BC58 09463299ZTX400 CD492 30571499ZTX400 CD493 30569199ZTX400 CD542 30586899ZTX400 CD543 30588299ZTX400 CD582 09447299ZTX400 CD583 09449699ZTX400 BR-SPOT 28938099ZTX400 CB 09423699ZTX400 CCD 09457199ZTX400 CDB 10136199ZTX400 CH 09425099ZTX400 CL 09431199ZTX400 CLC-465-468 09421299ZTX400 CM 09435999ZTX400 CM-620 10852099ZTX400 CP 28936699ZTX400 CP1-450 09415199

Description EOCZTX400 CP1-TR-450 09569199ZTX400 CP2-450 09417599ZTX400 CP2-TR-450 09571499ZTX400 CP-430 09419999ZTX400 CP-555-MB 68446899ZTX400 CP-555-WB 68444499ZTX400 CPX 28980900ZTX400 CU 09459599ZTX400 DC 09837199ZTX400 EC 10166899ZTX400 ECC 09441099ZTX400 EP1-450 09411399ZTX400 EP2-450 09202799ZTX400 EP-430 09413799ZTX400 EP-555-MB 68438399ZTX400 EP-555-WB 68440699ZTX400 EP-CU7 68521299ZTX400 EP-PHL 68442099ZTX400 LB (2PCS) 09443499ZTX400 LB-FR 29565799ZTX400 MB 09427499

Description EOCZTX400 PB 10134799ZTX400 SD 10169900ZTX400 SMS 09429899ZTX400 UB 09200399ZTX400 UCD 09455799ZTX400 WB (2PCS) 09445899ZTX400 WB-FR 29567199ZTX400 BR6 30281299ZTX410 CP 09887699ZTX410 ICC 09433599ZTX400 TC 09439799

Accessories for IP40ZTX400 LPH-IP40-S (2PCS) 10088399ZTX400 LPH-IP40-T (2PCS) 10090699ZTX400 IP40 10327399ZTX400 IP40 (8PCS) 28653299ZTX400 1 36 PT SET 10610600ZTX400 1 58 PT SET 10611300ZTX400 2 36 PT SET 10612000ZTX400 2 58 PT SET 10613700

TTX400 order assistentFree program to configurate your TTX400 solutioninto a complete ordering list.

www.TTX400.philips.com

100

200

300

400

γ

50

100

150

200

250

300

γ

50

100

150

200

250

300

γ

29

Photometrics

Photometrics1xTL-D58W 2xTL-D58W 1xTL5-49W 1xTL5-49W 2xTL5-49W 2xTL5-49W

50

100

150

200

250

300

γ

50

100

150

200

250

300

γ

100

200

300

400

γ

50

100

150

200

250

300

γ

50

100

150

200

250

300

γ

50

100

150

200

250

300

γ

100

200

300

400

500

γ

50

100

150

200

250

300

γ

100

200

300

400

500

γ

100

200

300

400

500

γ

100

200

300

400

γ

150

300

450

600

750

γ

100

200

300

400

500

γ

100

200

300

400

500

γ

50

100

150

200

250

300

γ

150

300

450

600

750

γ

100

200

300

400

γ

150

300

450

600

750

γ

150

300

450

600

750

γ

150

300

450

600

750

γ

250

500

750

1000

1250

1500

γ

150

300

450

600

750

γ

100

200

300

400

γ

250

500

750

1000

1250

1500

γ

50

100

150

200

250

300

γ

200

400

600

800

1000

γ

200

400

600

800

1000

γ

150

300

450

600

750

γ

100

200

300

400

500

γ

100

200

300

400

500

γ

150

300

450

600

750

γ

White reflector

White reflector + inlay

White reflector + louvre

Aluminium reflector

100

200

300

400

γ

50

100

150

200

250

300

γ

150

300

450

600

750

γ

87214 73% 22

GMX450

87725 75% 22

GMX450/GGX451 M-NB

87602 77% -

GMX450/GGX450 A

87217 57% 20

GMX450/GGX450 L

87479 84% 20

GMX465 M-NB

87627 89% 22

GMX470 C-NB

87254 83% -

GMX467 M-A

87258 73% 24

GMX450

87523 74% 23

GMX450/GGX453 M-WB

87523 76% 23

GMX450/GGX454 M-DA

87262 56% 22

GMX450/GGX450 M2

87597 81% 22

GMX465 HB-NB

87293 80% 23

GMX466 M-WB

Data available upon requestGMX466 HB-A

88653 90% 24

GMX555 WB

88654 91% 22

GMX555 MB/GGX555 C-BD20

88656 88% -

GMX555 MB/GGX555 C-A20

88703 68% 24

GMX555 WB/GGX555 L

88401 93% 21

GMX565 M-MB

88435 98% 21

GMX565 HB-NB

88208 95% -

GMX567 M-A

88652 85% 23

GMX555 MB

88655 95% 23

GMX555 MB/GGX555 C-BD40

88657 90% -

GMX555 MB/GGX555 C-A40

88660 76% 18

GMX555 MB/GGX555 C6

87981 100% 23

GMX570 C-NB

88154 100% 21

GMX570 HB-NB

88662 80% 26

GMX555 WB

88663 79% 25

GMX555 MB/GGX555 C-BD20

88707 65% 23

GMX555 WB/GGX555 L

88405 90% 23

GMX565 HB-NB

88401 93% 21

GMX565 M-NB

88396 92% -

GMX566 HB-A

88661 72% 25

GMX555 MB

88664 81% 25

GMX555 MB/GGX555 C-BD40

88669 66% 20

GMX555 MB/GGX555 C6

88262 78% 26

GMX566 M-WB

88263 93% 26

GMX566 HB-WB

Legend

LOR= 73%

UGR= 22according CEN, 4H x 8H, 752

C0-C180

C90-C270

(cd/1000lm) 0o

180o

30oo30

60oo60

90oo90

120oo120

50

100

150

200

250

300

γ

87214 73% 22

MAXOS: Lightline for maximum design and flexibillity

www.TTX400.philips.com

12NC- 3222 635 44001

Printed in The Netherlands -11/2003- Data subject to change