TTS Catalog 2012

Thru Tubing Solutions is a company dedicated to the coiledtubing and snubbing industry. We are committed to providingexcellent service to the oilfield industry, specializing in workingdownhole tools under pressure during various fishing and drillingoperations. Our commitment to you, the customer, is a solutionsbased company with safety and service our primary goals.

Thru Tubing Solutions’ engineering department has developed a complete line of snubbing and thru tubing tools including a patented sealed bearing mud motor.

Our engineering capabilities allow quick response time for “hot jobs,” providing custom engineered products available to field operations – often with same day results.

Thru Tubing Solutions’ quality inspection facility maintains conformity of all manufactured equipment. We also have equipment to test performance and metallurgy specifications to ensure our customers always receive the best equipment in the industry.

Mission Statement

Engineering Solutions

i

Company Locations

Corporate Headquarters11515 S. Portland AvenueOklahoma City, OK 73170405-692-1900 (office)405-692-1911 (fax)

www.ThruTubing.comEmail: [email protected]

TEXAS6769 Interstate Highway 37Corpus Christi, TX 78409361-883-4600 (office)361-883-4602 (fax)

1138 W. Harrison RoadLongview, TX 75604903-758-5822 (office)903-758-8155 (fax)

12808 West Highway 80 EastOdessa, TX 79765432-563-5400 (office)432-563-5308 (fax)

ARKANSAS1 Landon LaneGreenbrier, AR 72058501-679-0448 (office)501-679-0488 (fax)

OKLAHOMA1501 E. 20th StreetElk City, OK 73644580-225-6977 (office)580-225-7077 (fax)

225 SW Haileyville Ave.McAlester, OK 74501918-429-7700 (office)918-429-7703 (fax)

WYOMING1706 Decora DriveRock Springs, WY 82901307-382-5744 (office)307-382-5733 (fax)

COLORADO1400 16th Street, Suite 400Denver, CO 80202720-932-8117 (office)720-932-8217 (fax)

LOUISIANA305 Turn RowLafayette, LA 70508337-289-9696 (office)337-289-9416 (fax)

NORTH DAKOTA4920 Highway 83 N., Suite 1Minot, ND 58702701-839-0167 (office)701-839-0178 (fax)

CANADA7969-49th AvenueRed Deer, AB T4P 2V5403-346-5550 (office)403-346-5575 (fax)

International Locations

#106, 7001 - 98th StreetClairmont, AB T0H 0W0780-830-1990 (office)780-830-7997 (fax)

CHINA - 中国Chengdu00-1-405-692-1900成都86-136-9327-4416

United States

ii

PENNSYLVANIA570 Vista Park DrivePittsburgh, PA 15205412-787-8060 (office)412-787-8063 (fax)

MEXICOAve. San Rafael Lote # 27BParque Moll IndustrialReynosa, Tamaulipas 8875652-899-141-0866 (office)

243 Grey Fox Drive, Suite 3Montoursville, PA 17754570-546-0323 (office)570-546-2331 (fax)

14090 SW Freeway, Suite 300Sugar Land, TX 77478281-340-2060 (office)877-354-1051 (fax)

313 North American Ave #1Cheyenne, WY 82009307-632-7734 (office)307-632-7748 (fax)

Table of Contents

Rotating Services• Titan Motor 1

• Carbide Mill 2

• Bits 3

• Wash Pipe & Shoes 4

• 2-Bladed Underreamer 5

• Bit Thruster 6

Coiled Tubing Conveyed Support Tools• External Slip Type CT Connector 7

• Dimple Connectors 8

• Anti-Rotation Roll-On Connector 9

• Dual Back Pressure Valve 10

• Hydraulic Disconnect 11

• Motor Head Assembly 12

• Circulating Sub 14

• HydraSet™ Jar 15

• HZ Impact Jar 16

• Achiever Vibrating Tool 17

• XRV™ – X-Tended Reach Vibratory Tool 18

• Lockable Swivel 19

• Safety Union 20

• Torque-Thru Sealed Knuckle Joint 21

• Hydraulic Setting Tool 22

• Venturi Junk Basket 23

• Boot Basket 24

• Circulating Junk Basket 25

• Nipple Locator 26

• Bow Spring Centralizer 27

• Weight Bar 28

Abrasive Cutting & Perforating Technology• High Velocity Abrasive Perforator 29

• High Velocity Abrasive Cutter 30

iii

Table of Contents Continued

Snubbing & Tubing Accessory Equipment• Pump-Off Check Valve 40

• Pump-Off Bit Sub 41

• Sliding Sleeve Bit Sub 43

• Snubbing Back Pressure Valve 44

• Relief Valve 45

• Profile Nipple 46

• Pump-Thru Lock 47

Wash Tool Accessories• Roll-On Connector 48

• Back Pressure Valve 49

• Sealed Knuckle Joint 50

• Wash Nozzle 51

• Pump-Off Wash Nozzle 52

• Spinning Wash Tool 53

E-Coil Equipment• Surface Bulkhead 54

• Cablehead 55

iv

BHA Schematics 56

Running & Retrieval Services• Overshot 31

• Continuous Tubing Overshot 32

• Cutting Overshot 33

• Overshot Pack-Off Sub 34

• GS Spear 35

• JDC Overshot 36

• Pump-Thru Wire Grab 37

• Pump-Thru Rope Spear 38

• Deployment Bar 39

1

O.D. Max. Torque* Flow Range* Connection

inmm

ft-lbsNm

bpmLpm

1.7043.2

180244

0.5 – 1.280 – 191

1” AM MT

2.1354.0

412559

0.5 – 1.480 – 223

1-1/2” AM MT

2.8873.0

1,0201,383

0.5 – 3.080 – 477

2-3/8” PAC

Titan Motor

The high performance Titan motor was designed exclusively for the workover/coiled tubing market. It provides many hours of reliable service under demanding operating conditions, such as repeated jarring and side loading from working in horizontal wells.

The sealed bearing pack incorporates a patented bearing section that has no traditional roller or ball bearings, which can become damaged when jarred upon. It utilizes a set of self lubricated sleeve and washer bearings that operate in a sealed “oil bath”. This motor design has proven itself with several years of very dependable and economical service.

• Thrust Washer Bearings

• Mud Lube or Sealed Bearing Pack

• Hot Hole and N2 Applications

• Ability to Withstand Jar Impact

• Robust Side Loading Strength

All motors are specially “fit” for every job to ensure the best results for any given scenario. Contact a Thru Tubing Solutions representative to discuss your specific needs.

*Max. Torque and Flow Range are dependent on specific motor selection and can vary with different configurations.

2

Carbide Mill

The Carbided Mill has become the standard for normal cleanouts. This economical mill can have any combination of shapes and sizes to meet customer needs.

Mill designs can include several features including:

• Standard and reverse clutch

• Flat, convex or concave bottom

• Tapered, step, string or watermelon profiles

• Crushed carbide, Star Cut carbide or carbide inserts

• Straight or Twister mill bodies

We recommend contacting a Thru Tubing Solutions representative for determining the proper mill for a given situation.

• Custom Sizing

• Cement Removal

• Cast Iron Bridge Plug Removal

• Composite Plug Removal

• Scale Drilling

• Open Hole Drilling

3

MD Diamond Bit

Roller Cone Bit

TSP Bit

Bits

Thru Tubing Solutions can provide roller cone style bits as well as a complete line of diamond bits through it’s third-party vendors.

• Standard Connections

• Wide Size Range

• Natural and PDC Diamond

We recommend contacting a Thru Tubing Solutions representative for determining the proper bit for a given situation.

4

Crown bottom

Cutlip bottom

Wavy bottom

Wash Pipe & Shoes

The carbide dressed shoes are used to wash over obstructions including Bridge Plugs, packers, locks (prongs), coiled tubing, wireline tool strings, coiled tubing tool strings, etc. Shoes are available in many different designs, however, wash pipe may be necessary for longer obstructions. We recommend contacting a fishing tool supervisor to accommodate your exact shoe and wash pipe requirements.

• Custom Sizes Available

• High Tensile Alloys Available

5

O.D. Length Tensile Torque *Max. Span Connection

inmm

ftm

lbskg

ft-lbsNm

inmm

1.7043.2

1.350.41

62,50028,350

460624

4.51114.7

1” AM MT

2.1354.0

1.990.61

88,28840,047

9941,348

5.88149.4

1-1/2” AM MT

2.8873.0

2.520.77

161,90073,437

1,9372,626

7.00177.8

2-3/8” PAC

*Max. Blade Spans shown are limited to maintaining tool O.D. Larger sizes are available.

2-Bladed Underreamer

The 2-Bladed Underreamer is used to drill obstructions such as cement, sand, scale and bridge plugs below a restriction. This tool is designed to work with a motor or threaded tubing. The Underreamer blades are actuated by pump pressure forcing a piston to expand the blades into their operating position. The blades are continuously cleaned as fluid flows through the tool. Once the pump is shut off, the blades can retract back into the body. This design utilizes a fully contained pivot pin that secures the blades with greater reliability than other designs.

• Unique Custom Blade Design

• Interchangeable Mill

• Blade Cleaning Flow

We recommend contacting a Thru Tubing Solutions representative for determining the exact tool for a given situation.

6

O.D. Length Tensile Torque Connection

inmm

ftm

lbskg

ft-lbsNm

1.7544.5

1.850.56

7,0003,175

532721

1” AM MT

2.1955.6

2.150.66

45,30020,548

1,4601,979

1-1/2” AM MT

2.8873.0

2.530.77

13,6806,205

1,6502,237

2-3/8” PAC

Bit Thruster

The hydraulically actuated bit thruster rotates as it hammers up and down helping to eliminate any obstruction it comes in contact with. This tool has the option to run in a non-rotating mode as well which can be useful when shifting sliding sleeves.

• Rotary Impact Tool

• Non-Rotating Option

7

Coil O.D. O.D. I.D.* Length Tensile Torque Connection

inin

mmin

mmftm

lbskg

ft-lbsNm

1.001.7043.2

0.6917.5

1.020.31

25,00011,340

460624

1” AM MT

1.251.7043.2

0.7519.1

0.990.30

15,0006,804

460624

1” AM MT

1.252.1354.0

1.0025.4

1.270.39

30,00013,608

9441,280

1-1/2” AM MT

1.502.1354.0

1.0025.4

1.270.39

30,00013,608

9441,280

1-1/2” AM MT

1.502.8873.0

1.1328.7

1.490.45

45,000

20,412

1,500

2,0342-3/8” PAC

1.503.0677.7

1.3835.1

1.680.51

52,000

23,587

1,500

2,0342-3/8” 8 Rd Box

1.752.8873.0

1.1328.7

1.600.49

50,000

22,680

1,500

2,0342-3/8” PAC

1.753.0677.7

1.3835.1

1.790.55

50,00022,680

1,5002,034

2-3/8” 8 Rd Box

2.002.8873.0

1.3835.1

1.640.50

52,00023,587

1,5002,034

2-3/8” PAC

2.003.0677.7

1.6942.9

1.830.56

45,00020,412

1,5002,034

2-3/8” 8 Rd Box

2.383.2582.5

1.3835.1

1.770.54

60,00027,216

1,5002,034

2-3/8” PAC

2.883.8898.4

1.3835.1

2.160.66

60,00027,216

2,0002,712

2-3/8” PAC

External Slip TypeCoiled Tubing Connector

The Coiled Tubing Connector is designed to allow a means of connecting a bottom hole assembly to the end of coiled tubing. This slip type connector is the ideal method for transfer of both tensile and torque from the coiled tubing to the bottom hole assembly.

• Slip Type

• Full I.D.

• Torque Thru

*Tools can be equipped with premium threads for a larger I.D.

8

Dimple Coiled Tubing Connector

The Dimple CT Connector is secured to the tubing by a series of set screws that seat in a pattern of impressions created with a specially designed dimpling tool. This CT connector provides a relatively fast and easy way to secure the BHA to the coiled tubing while maintaining torque and tensile capabilities.

Contact a TTS representative for Internal Dimple CT connector applications.

• One Piece Design

• Torque Thru

• Simple Installation & Removal

Coil O.D. O.D. I.D. Length Tensile Torque Connection

inin

mmin

mmftm

lbskg

ft-lbsNm

1.501.8847.8

0.7519.1

0.520.16

62,50028,350

460624

1” AM MT

1.502.1354.0

1.0025.4

0.520.15

88,28840,046

9941,348

1-1/2” AM MT

1.752.1354.0

1.0025.4

0.480.15

73,47733,328

700949

1-1/2” AM MT

2.002.3860.5

1.0025.4

0.480.15

82,54937,443

700949

1-1/2” AM MT

1.502.8873.0

1.3835.1

0.610.19

218,570

99,142

1,937

2,6262-3/8” PAC

2.002.8873.0

1.3835.1

0.540.16

218,570

99,142

1,937

2,6262-3/8” PAC

2.383.0076.2

1.3835.1

0.540.16

184,577

83,723

1,937

2,6262-3/8” PAC

9

Coil O.D. O.D. I.D. Length Connection

inin

mmin

mmftm

1.001.2531.8

0.6315.9

0.490.15

7/8” AM MT

1.251.2531.8

0.6315.9

0.490.15

7/8” AM MT

1.501.5038.1

0.6917.5

0.540.16

1” AM MT

1.501.9449.3

0.6917.5

0.630.19

1-1/2” AM MT

1.751.7544.5

0.7519.1

0.580.18

1” AM MT

1.751.9449.3

0.7519.1

0.630.19

1-1/2” AM MT

2.002.0050.8

0.7519.1

0.630.19

1” AM MT

2.002.0050.8

0.7519.1

0.630.19

1-1/2” AM MT

Anti-Rotation Roll-On Connector

The Anti-Rotation Roll-On Connector (AROC) is an improvement on standard roll-on connectors. The AROC provides superb torque thru capabilities while maintaining a slick OD and simple installation requirements.

• Torque Thru

• Slick OD

10

O.D. I.D. Length Tensile Torque Connection

inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.6917.5

1.290.39

39,85018,076

460624

1” AM MT

2.1354.0

1.0025.4

1.700.52

70,63032,037

9441,280

1-1/2” AM MT

2.8873.0

1.0025.4

1.410.43

188,98085,720

4,0115,438

2-3/8” PAC

Dual Back Pressure Valve

The Dual Back Pressure Valve is designed to provide a means of shutting-off the coiled tubing from within the well. This tool can be used to simply prevent flow up the bottom hole assembly.

• Maintains Well Control

• Large I.D. for Ball Passage

• Dual for Back-Up

11


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.4511.5

1.430.44

43,00019,505

625847

1” AM MT

2.1354.1

0.5313.5

1.740.53

60,00027,216

9441,280

1-1/2” AM MT

2.8873.0

0.6917.5

2.240.68

115,200

52,254

3,086

4,1842-3/8” PAC

Hydraulic Disconnect

The Hydraulic Disconnect is an essential piece of equipment used for releasing the coiled tubing from the bottom hole assembly if it has become stuck while in the wellbore. Features include “hidden” internal shear screws that are fully retained and cannot come loose. This design transmits torque by use of internal splines that are far more durable than standard external “castles” which are more susceptible to damage.

• Transmits Torque

• Standard G.S. Type Internal Fishing Profile

• Impact Resistant to Jarring

12


inin

mmin

mmftm

lbskg

ft-lbsNm

1.251.7043.2

0.4511.5

2.590.79

15,0006,804

625847

1” AM MT

1.252.1354.0

0.5313.5

2.950.90

30,00013,608

9441,280

1-1/2” AM MT

1.502.1354.0

0.5313.5

2.950.90

30,00013,608

9441,280

1-1/2” AM MT

1.502.8873.0

0.6917.5

3.621.10

45,00020,412

1,5002,034

2-3/8” PAC

1.752.8873.0

0.6917.5

3.731.14

50,00022,680

1,5002,034

2-3/8” PAC

2.002.8873.0

0.6917.5

3.771.15

52,000

23,587

1,500

2,0342-3/8” PAC

Motor Head Assembly

The Motor Head Assembly serves as a multi-function tool. This tool was developed to be run primarily with a downhole motor. The Motor Head Assembly combines the coiled tubing connector, dual back pressure valve, and hydraulic disconnect into one compact tool. Utilizing this tool in the bottom hole assembly greatly shortens the overall length of the complete tool string. A shorter bottom hole assembly requires less lubricator, allowing for a much safer rig up of the coiled tubing injector head. The components can also be separated into different configurations depending on specific requirements.

• Slip Type Connector

• Dual Flapper Valve

• Standard Fishing Profile

• No Exposed Shear Screws

Other configurations on next page.

Complete MHA (CTC, BPV & HD)

13

Motor Head Assembly


inin

mmin

mmftm

lbskg

ft-lbsNm

1.251.7043.2

0.6917.5

1.950.59

15,0006,804

460624

1” AM MT

1.252.1354.0

1.0025.4

2.460.75

30,00013,608

9441,280

1-1/2” AM MT

1.502.1354.0

1.0025.4

2.460.75

30,00013,608

9441,280

1-1/2” AM MT

1.502.8873.0

1.0025.4

2.890.88

45,00020,412

1,5002,034

2-3/8” PAC

1.752.8873.0

1.0025.4

3.000.91

50,00022,680

1,5002,034

2-3/8” PAC

2.002.8873.0

1.0025.4

1.640.50

52,000

23,587

1,500

2,0342-3/8” PAC

CT Connector & Back Pressure Valve


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.4511.5

1.800.55

39,85018,076

460624

1” AM MT

2.1354.0

0.5313.5

2.200.67

60,00027,216

9441,280

1-1/2” AM MT

2.8873.0

0.6917.5

2.740.84

115,20052,254

3,0864,184

2-3/8” PAC

Back Pressure Valve & Hyd. Disconnect


inmm

inmm

ftm

lbskg

ft-lbsNm

2.8873.0

0.5614.2

3.401.04

144,00065,317

1,9002,576

2-3/8” PAC

Hyd. Disconnect & Circulating Sub

14


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.389.5

0.830.25

50,00022,680

459622

1” AM MT

2.1353.9

0.4411.1

1.150.35

88,28840,047

9941,348

1-1/2” AM MT

2.8873.0

0.5614.3

1.580.48

188,98085,720

1,9372,626

2-3/8” PAC

3.1379.5

0.5614.3

1.780.54

281,160127,532

4,6006,237

2-3/8” REG

4.20106.7

0.8120.6

2.570.78

405,000183,705

1,6502,237

3-1/2” PH-6


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.389.7

0.830.25

62,50028,350

460624

1” AM MT

2.1353.9

0.4411.1

1.150.35

88,28840,047

9941,348

1-1/2” AM MT

2.8873.0

0.5614.3

1.580.48

188,98085,720

1,9372,626

2-3/8” PAC

Circulating Sub

The Circulating Sub, normally run above a downhole motor, is designed to provide a means of circulation to the annulus upon activation. This tool utilizes a drop ball for actuation.

• Saves Wear on Motor

• Circulating Path

• Dual Option Available with Rupture Disk

Dual Circulating Sub

Diverting Circulating Sub

15


inmm

inmm

ftm

lbskg

ft-lbsNm

2.8873.0

0.8822.4

5.261.60

201,90091,580

2,4653,342

2-3/8” PAC

HydraSet™ Jar

The HydraSet™ Jar is used to free BHA’s that have become stuck in the wellbore. The innovative design of this tool allows operators to reset the jar by increasing the differential pressure within the tool thus, reducing cycling fatigue on coiled tubing. The rugged design and minimal set-down weight requirement make this tool ideal for horizontal wells.

• Hydraulic Reset Feature

• High Impact

• Rugged Design

16

HZ Impact Jar

The HZ Impact Jar can be fired up or down multiple times simply by pushing or pulling on the immobilized tool string. A very low re-cocking force makes this design ideal for horizontal wells where pushing capabilities are limited. The jarring impact can easily be controlled by varying the applied force. No pre-setting or adjustments are needed before tripping in the hole or prior to jarring. A large thru bore is incorporated allowing ball actuated tools to be run below the jar.

• Low Re-Cocking Force

• Engineered for Horizontal Applications

• Neutral Position

• High Impact

HZ Impact JarO.D. I.D. Length Tensile Torque Connection

inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5614.2

6.101.86

52,40023,768

355481

1” AM MT

2.1354.0

0.6917.5

6.101.86

91,30241,414

628851

1-1/2” AM MT


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5614.2

5.951.81

52,40023,768

355481

1” AM MT

2.1354.0

0.6917.5

5.941.81

91,30241,414

628851

1-1/2” AM MT

2.8873.0

0.8822.4

4.301.31

211,53595,951

2,4653,342

2-3/8” PAC

HZ Bumper Jar

17


inmm

ftm

lbskg

ft-lbsNm

2.1955.6

3.651.11

73,25633,228

9941,348

1” AM MT

2.8873.0

2.540.77

188,98085,720

1,9372,626

1-1/2” AM MT

4.75120.7

6.411.95

538,368244,200

16,41422,250

2-3/8” PAC

Achiever Vibrating Tool

Thru Tubing Solutions’ Achiever Vibrating Tool is used primarily in horizontal wells where friction can cause the coiled tubing to friction lock due to helical buckling as the tool string is pushed further into laterals. This patent pending design allows operators to reach their targeted depths with much less resistance.

• No External Moving Parts

• Low Maintenance Cost

• Shorter Length Than Competitors

• N2 Compatible

• Operates in High Temperatures

18

O.D. Length Tensile Torque Flow Rate Connection

inmm

ftm

lbskg

ft-lbsNm

bpmLpm

1.6943.2

1.200.37

53,67924,348

460624

1159

1” AM MT

2.1354.0

1.390.42

84,00538,104

9941,348

1.5238

1-1/2” AM MT

2.8873.0

1.650.50

159,27172,244

1,9372,626

2318

2-3/8” PAC

2.8873.0

1.650.50

159,27172,244

1,9372,626

3477

2-3/8” PAC

3.5088.9

2.790.85

273,000123,831

4,4005,966

4636

2-7/8” PH-6

3.5088.9

2.790.85

273,000123,831

4,4005,966

5795

2-7/8” PH-6

XRV™ – X-Tended Reach Vibratory Tool

Thru Tubing Solutions’ XRV™ is a dynamic excitation tool that enables coiled tubing to reach depths that were previously unobtainable. Designed without any moving parts or elastomers, this tool can handle virtually any environment, chemical or temperature.

The XRV™ is the shortest, most reliable friction reducing tool on the market.

• Unlimited Temperature Range

• Wide Range of Operational Flow Rates

• Uses No Elastomers

• N2 Compatible

19


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5313.5

1.300.40

21,0009,525

418567

1” AM MT

2.1354.0

0.8120.6

1.280.39

22,30010,115

9371,270

1-1/2” AM MT

2.8873.2

1.0025.4

1.670.51

59,30026,898

1,7602,386

2-3/8” PAC

Lockable Swivel

The Lockable Swivel was designed to allow for long bottom hole assemblies to be made up to the coiled tubing connector. This tool allows for rotation at the swivel instead of rotating the entire bottom hole assembly.

• Sealed Assembly

• Torque Thru Capabilities

• Optional Locking Mechanism

20


inmm

inmm

ftm

lbskg

ft-lbsNm

2.8873.2

1.0025.4

1.750.53

132,30060,010

2,1102,861

2-3/8” PAC

4.75120.7

2.0050.8

2.670.81

343,000155,582

8,60011,660

3-1/2” IF

Safety Union

The Safety Union was designed to allow for long assemblies to be made up without wrenches overhead, providing for a safer working environment and limiting exposure under the injector head.

• Safer/Easier Way to Make-Up Tools

• Eliminates Over-Head Wrenching

• Limited Time Under Injector Head

21


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5313.5

0.950.29

45,00020,412

308418

1” AM MT

2.1354.0

0.5915.0

1.160.35

70,60032,024

532721

1-1/2” AM MT

2.8873.2

0.7820.0

1.670.51

130,99159,417

1,1401,546

2-3/8” PAC

Torque-Thru Sealed Knuckle Joint

The Torque-Thru Sealed Knuckle Joint will allow for torque to be transmitted through the tool while providing some flexibility to a ridged bottom hole assembly and reducing any unnecessary side loads. The Knuckle Joint is also sealed to allow fluid to pass through for washing or operating any hydraulic tools below it.

• Sealed

• 360 Degree Articulation

• Torque Thru Capabilities

22

Nom. O.D. I.D. Length Tensile Torque Connection

inmm

inmm

ftm

lbskg

ft-lbsNm

1-11/16 Go1.8145.9

0.317.9

3.631.12

24,68111,195

N/A 1” AM MT

#51.8145.9

0.317.9

3.321.01

24,68111,195

N/A 1” AM MT

#103.1379.5

0.4411.2

2.440.74

61,00027,669

350475

2-3/8” PAC

#203.8196.7

0.4411.2

2.500.76

115,00052,163

1,0251,390

2-3/8” PAC

Hydraulic Setting Tool

Thru Tubing Solutions’ Hydraulic Setting Tool is the shortest on the market making it ideal for horizontal applications. The unique flow-thru feature allows for washing away any sediment or debris that could prevent a plug from sealing or engaging properly.

• Short Tool Length

• Compatible with Standard Plugs

• Flow Thru Capabilities

• Can be Run with Perforators

23


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

1.1329.0

3.841.17

49,81122,594

460624

1” AM MT

2.1354.0

1.5038.1

4.391.34

70,63032,037

9941,348

1-1/2” AM MT

2.8873.0

2.0050.8

4.321.32

115,00052,163

2,1102.861

2-3/8” PAC

Venturi Junk Basket

The Venturi Junk Basket works by pumping fluid or nitrogen down the coiled tubing creating a venturi action. This causes suction at the bottom of the tool pulling debris into the basket where it is trapped. Finger grabs hold the debris until it can be removed from the well bore. The Venturi Basket may also be run with a motor.

• Removes Loose Debris

• Various Extension Lengths

• Milling Option Available

24


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5012.7

2.370.72

61,40027,851

460624

1” AM MT

2.1354.0

0.5012.7

2.490.76

88,28840,047

9941,348

1-1/2” AM MT

2.8873.0

0.6316.0

2.510.77

188,98085,720

1,9372,626

2-3/8” PAC

Boot Basket

The Boot Basket is used to collect debris that is too large to be carried out of the hole by normal circulation. The Boot Basket is designed to create a change in velocity around the upper end of the tool, allowing debris to fall into the cavity between the skirt and mandrel.

• Collects Loose Debris

• Solid Construction

• Full Flow Thru

25

Nom O.D. Length Tensile Torque Connection

inmm

ftm

lbskg

ft-lbsNm

3.503.6091.4

4.911.50

62,50028,350

460624

2-3/8” PAC

3.633.8898.6

4.911.50

62,50028,350

460624

2-3/8” PAC

4.004.50114.3

5.871.79

88,28840,047

9941,348

2-3/8” PAC

Circulating Junk Basket

The Circulating Junk Basket features a sliding junk housing that can “scoop” up debris, as it is pushed into lateral sections. Once the tools reach bottom the string is quickly pulled up causing the housing to slide down and secure the debris inside.

• Flow-Thru

• Large Debris Chamber

• Scooping Feature

26

Nipple Locator

The Nipple Profile Locator gives a simple means of depth location. Run on coiled tubing or slickline, the nipple profile locator gives an overpull when passing through a standard nipple. Depth location can then be correlated back to the coiled tubing counter wheel.

• Bi-Directional Indication

• Torque Thru

• Flow Thru


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.6917.5

1.740.53

49,10022,271

1,3401,817

1” AM MT

2.1354.0

0.8120.6

2.000.61

31,00014,061

1,3201,790

1-1/2” AM MT

27


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5614.2

3.751.14

34,90015,830

507687

1” AM MT

2.1354.0

0.5614.2

3.751.14

42,34019,205

1,0431,414

1-1/2” AM MT

2.8873.2

1.0025.4

4.001.22

95,99043,540

3,3704,569

2-3/8” PAC


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.5614.2

4.921.50

56,60025,673

507687

1” AM MT

2.1354.0

0.5614.2

5.131.56

99,68045,214

1,0431,414

1-1/2” AM MT

2.8873.2

1.0025.4

5.251.60

200,80091,081

3,3704,569

2-3/8” PAC

Bow Spring Centralizer

The Bow Spring Centralizer is used to centralize the BHA inside larger tubing or casing after it has passed through a restricted ID. The Centralizer is designed for the springs to be at constant maximum expansion.

• Centralizes Tool String

• Flow Thru Capabilities

• Large Expansion

Hydraulic Type

Mechanical Type

28

Weight Bar

The use of a weight bar can increase the amount of impact applied at the fish while running in tandem with a Jar and Accelerator.

• Added Impact While Jarring

• Custom Made

• Allows Greater Hammer Effect


inmm

inmm

ftm

lbskg

ft-lbsNm

1.7043.2

0.7519.1

5.001.52

62,50028,350

460624

1” AM MT

1.7043.2

0.7519.1

10.003.05

62,50028,350

460624

1” AM MT

2.1354.0

1.0024.5

5.001.52

88,28840,047

9941,348

1-1/2” AM MT

2.1354.0

1.0024.5

10.003.05

88,28840,047

9941,348

1-1/2” AM MT

2.8873.0

1.3834.9

5.001.52

188,98085,720

1,9372,626

2-3/8” PAC

2.8873.0

1.3834.9

10.003.05

188,98085,720

1,9372,626

2-3/8” PAC

29

High Velocity Abrasive Perforator

The High Velocity Abrasive Perforating Tool has special port design and positioning for directing an abrasive fluid through tubing or casing into the formation. Running this tool with a special mixture of abrasive fluids accomplishes a complete perforation of the well. Because of the design of the Abrasive Perforating System, multiple perforations are possible on a single trip in the hole. Case histories have shown over 200 perforations on a single trip. Custom tool designs are available to provide the desired perforations per foot.

Not only is this system a viable alternative to TCP or conventional wireline perforating, but it can also perforate wells where other systems are not an option. The system has proven successful in perforating drill collars, drill pipe, and multiple casing strings in a single trip.

We recommend contacting a Thru Tubing Solutions representative to determine the exact configuration for a given situation.

• Multiple Zone Perforation on One Trip

• Heavy Wall Perforation

• Horizontal Well Applications


30

High Velocity Abrasive Cutter

The High Velocity Abrasive Cutting Tool has special port positioning for directing an abrasive fluid jet stream into the ID of the pipe to be severed. Running this tool with the Titan down hole motor and a special mixture of abrasive fluids accomplishes a complete severing of the tubular. As this tool rotates below the motor, the abrasive fluids penetrate and sever the tube where the jet stream makes contact. The result is a clean cut without any flaring of the tubular.

We recommend contacting a Thru Tubing Solutions representative for determining the exact tool for a given situation.

• Ability to Cut Tubing, Casing, Completion Components, Drill Pipe & Drill Collars

• Horizontal Well Applications

• Clean Cut, No Flared Ends After Cut


31

Overshot

Thru Tubing Solutions specializes in restricted I.D. fishing with a wide assortment of overshots. Sizes range from 1-21/32” to 4-1/8” O.D. (specialty overshots available upon request).

• Specialty Bowls and Grapples

• Standard and Oversize Guides

• Premium Thread Top Subs

• Series 10, 20, 70 & 150

32

O.D. I.D. Length Tensile Torque Catch Range Connection

inmm

inmm

ftm

lbskg

ft-lbsNm

in

1.8647.2

1.3133.4

2.050.62

31,30014,197

1,0101,369

1” to 1-1/4” 1-1/4” CS

2.0652.3

1.3133.4

2.450.75

65,00029,484

8001,085

1” to 1-1/4” 1-1/4” CS

2.7068.6

1.8146.1

2.460.75

62,00028,123

2,2503,051

1” to 1-3/4” 2-3/8” CS

3.1379.3

1.8847.8

2.830.86

84,00038,102

2,9504,000

1” to 1-3/4” 2-3/8” CS

3.3885.7

2.1353.9

2.640.80

91,00041,322

4,5606,182

1” to 2” 2-7/8” CS

Continuous Tubing Overshot

The continuous tubing overshot is used to retrieve coiled tubing or threaded pipe. This overshot is a non-releasable tool designed to swallow large sections without dulling grapples.

• Wide Catch Range

• Swallow Large Sections of Tubing

• Coiled Tubing or Threaded Pipe

33


inmm

inmm

ftm

lbskg

ft-lbsNm

in

2.0652.4

1.3133.4

1.960.60

65,00029,484

1,3601,844

1” to 1-1/4” 1-1/2” CS

2.5063.5

1.5639.7

2.980.91

74,00033,566

2,4403,308

1-1/2” 2-1/16” CS

2.7068.6

1.8146.1

3.250.99

62,00028,123

2,2503,051

1-1/4” to 1-3/4” 2-3/8” CS

3.3885.7

2.1353.9

2.900.88

91,00041,280

4,5806,210

1-3/4” to 2” 2-7/8” CS

Cutting Overshot

The Snipper Overshot is used to cut and retrieve coiled tubing that has been parted, stuck or abandoned in the well bore. Once the appropriate overpull is reached screws are sheared causing the blades to sever the coiled tubing. A clean fishing neck is left looking up.

• Retrieve Cut Segment

• Reduced Overpull and Necking of Coil

• Leaves Clean Cut

• Coiled Tubing or Threaded Pipe

34

Overshot Pack-Off Sub

The Pack-off Sub is designed to be run above the Continuous Tubing or Cutting Overshot. The Pack-off Sub creates a seal between the work string and the fish. Circulation can then be maintained through the fish.

• Tubing or Coiled Tubing

• 5000 psi

• Maintain String Pressure Integrity


inmm

inmm

ftm

lbskg

ft-lbsNm

in

1.8647.2

1.3033.0

1.030.31

69,00031,298

1,0101,369

1” to 1-1/4” 1-1/4” CS

2.0652.3

1.3033.0

1.180.36

52,00023,587

1,2581,706

1” to 1-1/4” 1-1/4” CS

2.7068.6

1.8146.1

1.300.40

47,20021,410

2,1602,929

1” to 1-3/4” 2-3/8” CS

3.1379.3

1.8146.1

1.670.51

90,40041,005

3,8905,274

1” to 1-3/4” 2-3/8” CS

3.3885.7

2.0953.2

1.480.45

102,00046,266

4,7706,468

1-1/2” to 2” 2-7/8” CS

35

GS Profile O.D. I.D. Length Tensile Connection

Nom.in

mmin

mmftm

lbskg

21.8146.1

0.194.8

1.760.54

31,20014,152

1” AM MT

2-1/22.1353.9

0.256.4

2.130.65

45,40020,593

1-1/2” AM MT

32.8873.0

0.256.4

2.770.84

68,00030,844

2-3/8” PAC

GS Profile O.D. I.D. Length Connection

Nom.in

mmin

mmftm

21.7544.5

0.194.8

0.970.30

1” AM MT

2-1/22.1654.9

0.317.8

0.990.30

1-1/2” AM MT

32.8873.0

0.5012.7

1.010.31

2-3/8” PAC

GS Spear

The GS Spear is used to retrieve a device with an internal fishing neck profile. The Spear is designed to withstand high side and tensional loads during a jarring operation. Thru Tubing Solutions utilizes two types of GS spears. Both mechanical and hydraulic spears have special applications depending on well conditions.

• Continuous Flow Thru

• Withstands High Tensile Forces

• Jar Down to Release (Mechanical)

• Flow Release Type (Hydraulic)

Mechanical Type

Hydraulic Type

36

GS Profile O.D. Length Tensile Connection

Nom.in

mmftm

lbskg

21.8146.1

1.760.54

31,20014,152

1” AM MT

2-1/22.1353.9

2.130.65

45,40020,593

1-1/2” AM MT

32.8873.0

2.770.84

68,00030,844

2-3/8” PAC

GS Profile O.D. Length Connection

Nom.in

mmftm

21.8847.2

1.200.37

1” AM MT

2-1/22.2557.2

1.230.37

1-1/2” AM MT

32.8071.0

1.250.38

2-3/8” PAC

JDC Overshot

The JDC Overshot is available in both hydraulic and mechanical versions. These tools are used to latch an external fishing neck found on some locks and probes. Utilizing coiled tubing, fluid is pumped through the tool. Sand or debris can then be circulated out of the way, exposing the fishing neck. Once the fishing neck is latched, over-pull is applied. Jars may also be utilized to assist in removing the fish.

• Hydraulic and Mechanical Versions

• Withstands High Jar Impacts

• Pump Through Capabilities

Mechanical Type

Hydraulic Type

37

O.D. I.D. Length Tensile Connection

inmm

inmm

ftm

lbskg

2.1354.0

0.7519.1

2.470.75

63,90028,985

1” AM MT

2.2557.2

0.7519.1

2.480.76

101,60046,085

1” AM MT

3.6392.2

1.3834.9

3.150.96

188,98085,720

2-3/8” PAC

4.50114.2

1.3834.9

3.250.99

188,98085,720

2-3/8” PAC

Pump-Thru Wire Grab

The Wire Grab is used as a means of removing lost slickline, electric line, or braided line in the well bore. The barbs on the tool entangle with the lost wire allowing the wire to be retrieved.


• Retrieve Lost Wireline

• Pump Thru

38

Pump-Thru Rope Spear

The Rope Spear is used as a means of removing lost slickline, electric line, or braided line in the well bore. The barbs on the tool entangle with the lost wire allowing the wire to be retrieved.


• Retrieve Lost Wireline

• Pump Thru


inmm

inmm

ftm

lbskg

2.8873.0

0.7519.1

3.801.16

132,50060,101

2-3/8” PAC

3.5088.9

0.7519.1

3.801.16

132,50060,101

2-3/8” PAC

39

Deployment Bar

The deployment bar is used to deploy long bottom hole assemblies into and out of the well. A deployment bar in the bottom hole assembly allows the capability of closing the BOP rams and slips for adding or removing a segment of the bottom hole assembly. This limits the amount of lubricator needed.

• Deploy Long Bottom Hole Assemblies

• O.D. to Match Coil O.D.

Dep. O.D. O.D. I.D. Length Tensile Torque Connection

inin

mmin

mmftm

lbskg

ft-lbsNm

1.251.7043.2

0.7519.1

10.003.05

62,50028,350

460624

1” AM MT

1.501.7043.2

0.7519.1

10.003.05

62,50028,350

460624

1” AM MT

1.252.1354.0

0.7519.1

1.270.39

70,63032,037

9441,280

1-1/2” AM MT

1.502.1354.0

0.7519.1

1.270.39

24,00010,886

400542

1-1/2” AM MT

1.752.1354.0

0.7519.05

1.270.39

24,00010,886

400542

1-1/2” AM MT

1.502.8873.0

1.1328.7

1.490.45

105,400

47,809

1,220

1,6542-3/8” PAC

1.752.8873.0

1.1328.7

1.600.49

50,000

22,680

1,200

1,6272-3/8” PAC

2.002.8873.0

1.3835.1

1.640.50

65,00029,484

2,3003,118

2-3/8” PAC

40


inmm

ftm

lbskg

ft-lbsNm

3.0677.8

1.020.31

143,46165,073

2,9754,034

2-3/8” 8 Rd

3.06*77.8

1.020.31

199,32090,410

3,8135,170

2-3/8” 8 Rd

3.0677.8

1.020.31

143,00064,864

1,9002,576

2-3/8” CS

3.6893.3

1.290.39

143,46165,073

2,9754,034

2-7/8” 8 Rd

Pump-Off Check Valve

The Pump-Off Check Valve was developed primarily for the snubbing and workover industry. This tool allows for circulating sand and solids while tripping tubing in the hole under pressure. Upon landing tubing at surface, a ball is dropped and pumped down to the tool. This causes the aluminum insert locking mechanism to shear and release. Once released a full I.D. is left in the production tubing.

• Drop Ball for Actuation

• Flapper or Ball Check Valve

• Aluminum Insert

• Standard Tubing Connections

* Flapper Style Check Valve I.D. – 0.97 in (24.6 mm)

41

Pump-Off Bit Sub

The Pump-Off Bit Sub was developed for the Snubbing and Workover Industry. This tool is used in conjunction with a Bit or Mill to complete a workover operation. Upon completing the drilling operation and landing the tubing at surface, a ball is dropped and or pumped to the tool. As a result, pressure is generated causing the locking mechanism to shear and release. The bottom sub then separates and the well is ready for production.

Thru Tubing Solutions offers four different styles of bit sub: single flapper, double flapper, ball check and reverse circulating.

• Drop Ball Actuated

• Torque Thru

• Balanced Piston


• High Tensile Strength

Other styles listed on next page.


inmm

ftm

lbskg

ft-lbsNm

2.2055.9

1.290.39

50,00022,680

9941,348

1-1/4” 10 Rd Box x1-1/2” AM MT Box

3.1379.4

1.850.56

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.6893.5

1.960.60

131,20859,515

2,9754,034

2-3/8” 8 Rd Box x2-7/8” REG Box

3.6893.5

1.960.60

131,20859,515

3,8135,170

2-7/8” 8 Rd Box x2-7/8” REG Box

Pump-Off Bit Sub w/ Ball Check Valve

42


inmm

inmm

ftm

lbskg

ft-lbsNm

3.0677.8

0.9624.6

1.810.55

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.1379.4

0.9624.6

1.810.55

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.6893.5

0.9624.6

1.960.60

105,00047,627

2,9754,034

2-3/8” 8 Rd Box x2-7/8” REG Box

3.6893.5

0.9624.6

1.960.60

105,00047,627

3,8105,166

2-7/8” 8 Rd Box x2-7/8” REG Box

3.6893.5

0.9624.6

2.000.61

248,000112,491

2,4503,322

2-7/8” PH-6 Box x2-7/8” REG Box

Pump-Off Bit Sub

O.D. I.D. Length Tensile Torque Connectionin

mmin

mmftm

lbskg

ft-lbsNm

3.1379.4

1.0025.4

1.580.48

186,17284,446

1,9372,626

2-3/8” 8 Rd Box x2-3/8” PAC Box

3.1379.4

1.2531.8

1.600.49

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.7595.3

1.2531.8

1.720.52

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-7/8” REG Box

3.1379.4

0.7519.1

1.450.44

79,00035,834

3,5704,840

2-3/8” REG Box x2-3/8” REG Box

3.6893.5

1.1930.2

1.870.57

131,18259,503

3,8135,170

2-7/8” 8 Rd Box x2-7/8” REG Box


inmm

inmm

ftm

lbskg

ft-lbsNm

3.0677.8

0.9624.6

2.030.62

122,00055,338

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.1379.4

0.9624.6

2.030.62

79,00035,834

2,8303,837

2-3/8” 8 Rd Box x2-3/8” REG Box

3.6893.5

0.9624.6

2.240.68

105,00047,627

2,9654,020

2-3/8” 8 Rd Box x2-7/8” REG Box

3.1379.4

0.9624.6

2.030.62

99,21045,001

3,2324,382

2-3/8” PH-6 Box x2-3/8” REG Box

3.6893.5

0.9624.6

2.300.70

105,00047,627

3,8135,170

2-7/8” 8 Rd Box x2-7/8” REG Box

Pump-Off Bit Sub w/ Dual Flapper

* No Check Valve

Pump-Off Bit Sub w/ Single Flapper

Reverse Circulating Pump-Off Bit Sub

43


inmm

inmm

ftm

lbskg

ft-lbsNm

3.6793.2

0.9724.6

1.880.57

199,32090,410

3,0494,134

2-7/8” EUE Box x 2-7/8” API REG Box

3.6793.2

1.0025.4

2.090.64

199,32090,410

3,0494,134

2-7/8” EUE Box x 2-7/8” API REG Box

3.6793.2

0.9724.6

1.830.56

136,94062,115

2,9754,034

2-3/8” EUE Box x 2-7/8” REG Box

Sliding Sleeve Bit Sub

The Sliding Sleeve Bit Sub was developed for the Snubbing and Workover Industry. This tool is used in conjunction with a Bit or Mill to complete a workover operation. Upon completing the drilling operation and landing the tubing at surface, a ball is dropped and or pumped to the tool. As a result, pressure is generated causing the sleeve mechanism to shear. The inner sleeve shifts down, exposing ports and the well is ready for production without pumping anything into the bottom of the well.

• Drop Ball Actuated

• Torque Thru

• Balanced Piston


• High Tensile Strength

44


inmm

inmm

ftm

lbskg

ft-lbsNm

1.6040.6

0.5814.7

1.070.33

70,00031,752

500678

1” CS

1.9349.0

0.6917.5

1.340.41

100,00045,359

8001,085

1-1/4” CS

2.1855.3

1.0025.4

1.420.43

120,00054,431

1,0001,356

1-1/2” CS

2.3359.2

1.0025.4

1.420.43

103,00046,720

1,1001,491

2-1/16” CS

2.9274.3

1.0025.4

1.720.52

237,000107,501

3,4004,610

2-3/8” PH-6

3.5189.2

1.0024.6

1.910.58

336,000152,407

6,0618,218

2-7/8” PH-6

4.31109.5

1.0025.4

1.570.48

285,000129,274

3,8005,152

3-1/2” PH-6

2.1955.6

0.6315.9

1.090.33

124,00056,246

1,5792,141

1-1/4” REG

3.1379.4

1.0025.4

1.780.54

298,999135,624

3,2324,382

2-3/8” REG

3.0677.8

1.0025.4

1.780.54

186,17284,446

3,7095,029

2-3/8” 8 Rd

3.6793.2

1.0025.4

2.000.61

199,32090,410

3,8135,170

2-7/8” 8 Rd

3.3885.7

1.0025.4

1.780.54

287,000130,181

6,2008,406

2-3/8” IF

4.75120.7

1.0025.4

1.410.43

538,368244,000

1,2811,737

3-1/2” IF

Snubbing Back Pressure Valve

The Snubbing Back Pressure Valve was designed to provide a dependable method of well control. This tool is typically run close to the bottom of the string to prevent fluid or gas from entering the tubing string. The dual flappers allow for a ball to pass through the tool and are more reliable than old style ball checks or dart-type floats.

• Dual Flappers

• Two Piece Construction

• Teflon Seats

• Standard and Premium Connections

• No Ball and Seats to Wash Out

45

Relief Valve

The Relief Valve is designed to safely bleed pressure from below a lock or back pressure valve. The plunger breaks the seal of a flapper style check valve as it is threaded into the main housing. The relief valve can be retro-fitted to accommodate any TTS flapper type back pressure valve. We recommend contacting a Thru Tubing Solutions representative for determining the exact configuration for a given situation.

• Safe Means of Relieving Pressure

• Jam Nut Pressure Seal

• Large By-Pass Area

46

Profile Nipple

Thru Tubing Solutions has a wide variety of both tubing and drill pipe nipples. We specialize in high pressure dual flapper style locks. Contact a TTS representative for profile and plug specifications and recommendations.

• 8 Round and Premium Threads

• Drill Pipe Connections

• Wide Range of Profiles

Size & Profile Seal Bore No Go I.D.

Nom.in

mmin

mm

1.710 ‘R’ / ‘RN’1.71043.4

1.56039.6

2.125 ‘R’ / ‘RN’2.12553.8

1.93749.2

2.188 ‘R’ / ‘RN’2.18855.6

2.01051.1

2.313 ‘R’ / ‘RN’2.31358.7

2.13154.1

2.563 ‘R’ / ‘RN’2.56365.1

2.32959.2

1.500 ‘X’ / ‘XN’1.50038.1

1.44836.8

1.875 ‘X’ / ‘XN’1.87547.6

1.79145.5

2.313 ‘X’ / ‘XN’2.31358.7

2.20556.0

47

Size & Profile No Go O.D. Min ID Eq. Flow Area

Nom.in

mmin

mmin2

cm2

1.710 ‘R’ / ‘RN’1.70043.2

0.5714.5

.0490.32

2.125 ‘R’ / ‘RN’2.11553.7

0.6917.5

.0280.18

2.188 ‘R’ / ‘RN’2.17555.2

0.6917.5

.0490.32

2.313 ‘R’ / ‘RN’2.30058.4

0.6925.4

.0490.32

2.563 ‘R’ / ‘RN’2.55064.8

1.0025.4

.0410.26

1.500 ‘X’ / ‘XN’1.49037.8

0.5711.9

.0140.09

1.875 ‘X’ / ‘XN’1.86547.4

0.6917.5

.0280.18

2.313 ‘X’ / ‘XN’2.30058.4

0.6925.4

.0140.09

Pump-Thru Lock

The Pump-Thru Lock is used primarily in the Snubbing industry and provides the capability of setting, changing or removing flow control equipment such as a Slickline Back Pressure Valve. It utilizes locking keys that provide a positive anchor within a nipple profile. This tool can either be run in place or set and pulled via slickline. The Pump-Thru Lock relies on a standard nipple profile and is capable of handling many hours of continuous pumping.

• Slickline Set and Retrieved

• Utilizes Standard Nipple Profiles

• Equalizing Feature

• Dual Flappers

48

Coil O.D. O.D. I.D. Length Connection

inin

mmin

mmftm

1.251.2531.8

0.6316.0

0.130.04

7/8” AM MT

1.501.5038.1

0.7519.1

0.150.05

1” AM MT

1.751.7544.5

0.7519.1

0.150.05

1” AM MT

1.751.9449.3

1.0025.4

0.150.05

1-1/2” AM MT

2.002.0050.8

1.0025.4

0.170.05

1-1/2” AM MT

2.382.3860.3

1.0025.4

0.540.16

1-1/2” AM MT

2.632.6366.7

1.3835.1

0.500.15

2-3/8” PAC

Roll-On Connector

The coiled tubing roll-on connector is used as a simple means of connecting the coiled tubing to a bottom hole assembly. The roll-on connector is attached to the coiled tubing by a method known as “crimping” the OD of the coiled tubing.

The coiled tubing roll-on connector is available in a variety of coiled tubing O.D. and weight configurations. The connectors may also be customized to meet your specifications.

• Keeps BHA Same O.D. as Coil

• Simple Installation

49


inmm

inmm

ftm

lbskg

ft-lbsNm

1.2531.8

0.4711.9

0.880.27

27,60112,520

254344

7/8” AM MT

1.5038.1

0.5814.7

1.080.33

62,50028,350

460624

1” AM MT

1.7544.5

0.6917.5

1.030.31

62,50028,350

460624

1” AM MT

2.0050.8

1.0025.4

1.170.36

66,60030,209

8981,218

1-1/2” AM MT


inmm

ftm

lbskg

ft-lbsNm

1.2531.8

0.590.18

27,60112,520

327443

7/8” AM MT

1.5038.1

0.610.19

62,50028,350

460624

1” AM MT

1.7544.5

0.610.19

62,50028,350

460624

1” AM MT

2.0050.8

0.930.28

88,28840,047

9941,348

1-1/2” AM MT

Back Pressure Valve

The coiled tubing back pressure valve is run as a down hole safety valve, preventing the flow upward inside of the coiled tubing string. All of the internal components are replaceable, allowing for simple redress of the complete back pressure valve.

The coiled tubing back pressure valve is also available in a variety of different styles and may also be customized to meet your specifications.

• Replaceable Inserts

• Dual Flappers

• AM MT and Mini MT Connections

• Can Accommodate Downhole Screen

Ball Type Check Valve

Flapper Type Check Valve

50


inmm

inmm

ftm

lbskg

1.2531.8

0.4411.2

0.860.26

27,60112,520

7/8” AM MT

1.5038.1

0.5012.7

1.010.31

43,64319,796

1” AM MT

1.7544.5

0.5012.7

1.100.34

26,25011,907

1” AM MT

2.0050.8

0.8822.2

1.180.36

62,00028,123

1-1/2” AM MT

Sealed Knuckle Joint

The coiled tubing sealed knuckle joint is used as a simple point of flexibility in a rigid bottom hole assembly. Having this component in the tool string maintains a sealed bottom hole assembly, yet allows for movement below the knuckle joint.

• 360 Degree Articulation

• High Tensile

51

O.D. Length Connection

inmm

ftm

1.2531.8

0.190.06 7/8” AM MT

1.5038.1

0.280.09 1” AM MT

1.7544.5

0.290.09 1” AM MT

2.0050.8

0.290.09 1-1/2” AM MT

2.1353.9

0.420.13 1-1/2” AM MT

2.8873.0

0.710.22 2-3/8” PAC

Wash Nozzle

The coiled tubing wash nozzle is used to clean the inside of well tubulars. While flowing through the wash nozzle a jetting action occurs allowing for the removal of fill from within the well bore. Selecting the appropriate nozzle configuration along with appropriate velocity at the nozzle, allows removal of residue such as salt, sand, mud, rust, and scale from the well bore.

• High Velocity Nozzles

• Variety of Port Angles and Sizes

The coiled tubing wash nozzle is available in many configurations. The nozzles may also be customized to meet your specifications. We recommend contacting a Thru Tubing Solutions representative for determining the exact tool for a given situation.

52


inmm

ftm

lbskg

ft-lbsNm

1.2531.8

0.690.21

27,60112,520

327443

7/8” AM MT

1.5038.1

0.770.23

62,50028,350

460624

1” AM MT

1.7544.5

1.000.30

62,50028,350

460624

1” AM MT

2.0050.8

1.160.35

88,28840,047

9941,348

1-1/2” AM MT


inmm

ftm

lbskg

ft-lbsNm

1.5038.1

1.010.31

29,72613,484

334453

1” AM MT

2.1253.8

1.410.43

88,28840,047

9941,348

1-1/2” AM MT

Pump-Off Wash Nozzle

The pump-off wash nozzle allows for washing debris, such as sand and solids while circulating the well bore. This tool utilizes a ball check valve that prevents flow into the coiled tubing string. Upon landing the string at the appropriate depth, a ball is pumped down to the tool activating the release mechanism. All of the internal components are then pumped out leaving the coiled tubing ready for production.

• Balanced Piston

• High Velocity Nozzle

• Positive Lock Mechanism

Dual Flapper Type

Ball Type Check Valve

53

O.D. Length Flow Range Connection

inmm

ftm

bpmLpm

1.6942.9

0.820.24

0.7 – 1.3111 – 207

1” AM MT

2.1353.9

1.330.41

0.8 – 2.0127 – 318

1-1/2” AM MT

2.5063.5

1.330.41

1.0 – 3.0160 – 480

1-1/2” AM MT

2.8773.0

1.300.39

1.0 – 3.0160 – 480

2-3/8” PAC

Spinning Wash Tool

The Spinning Wash Tool was developed specifically for Coiled tubing down hole operations. This tool features a nozzle head that rotates by means of water jet reaction force. Its rotational speed is controlled by a high-pressure water swivel with a viscous brake. The water jets were designed to clean irregular surfaces without damaging tubular goods. The Spinning Wash Tool is used to clean Calcium Carbonate Scale, Barium Sulfate Scale, Water Scale, Asphaltine and paraffin plugs.

• Self Rotating

• Interchangeable Heads

• Stainless Steel Construction


• Controlled Viscous Brake

54

Surface Bulkhead

The E-Coil Surface Bulkhead is used to terminate the logging cable inside the reel on an e-coil coiled tubing unit. This device provides a high pressure, fluid-tight point for the logging conductors to transition from the inside of the coiled tubing to the cable going to the collector ring.

• Rated to 15,000 PSI

• Single or Multi-Conductor Cable

55

Cablehead

The E-Coil Cablehead is intended for coiled tubing logging applications by providing a connector or crossover between the coiled tubing and the logging tools. It is designed with a shock-mounted shear pin disconnect, which serves as an emergency release in case the logging tools become stuck while in the well. This tool also incorporates a cable bypass sub that includes two flapper check valves to prevent flow back up the coiled tubing.

• Proprietary Shock-Absorption System

• Single or Multi-Conductor Cable

• Full Pressure Control

• Available in 1.75” and 2.88” OD

O.D. Length Type Connection

inmm

ftm

1.7544.5

3.020.92

Single1” AM MT Box x

1.69” Type “A” Go Pin2.8873.0

3.561.09

Single2-3/8” PAC Box x

2.00” Type “A” Go Pin2.8873.0

3.411.04

Multi2-3/8” PAC Box x

2.00” – 8 Stub Acme Box

56

Bottom Hole Assembly

Thru Tubing Solutions utilizes coiled tubing and a downhole motor to drill cement, sand, shale or other solids from a well bore. Motor and mill selection is a key to getting the well bore clean.

Motor HeadAssembly

TitanMotor

Carbide Mill

57


Thru Tubing Solutions utilizes coiled tubing and a downhole motor to drill composite plugs, cast iron plugs, float equipment and other obstructions from a well bore. The use of a Titan Motor allows for a Bi-directional Jar to be run in the bottom hole assembly which greatly reduces the chance of becoming stuck.

Coiled TubingConnector

Dual BackPressure Valve

Hydraulic Jar

HydraulicDisconnect

TitanMotor

Carbide Mill

58


Thru Tubing Solutions utilizes a Venturi Basket and a downhole motor to clean debris off of a fishing neck.

Coiled TubingConnector/

Back PressureValve

Hydraulic Jar

HydraulicDisconnect

TitanMotor

VenturiJet Basket

59


Thru Tubing Solutions utilizes a spinning wash tool to clean debris from a well bore.

Motor HeadAssembly

SpinningWash Tool

60


Thru Tubing Solutions utilizes an overshot run on coiled tubing to latch and pull different assemblies with the ability to circulate sand and other debris from top of fish.

Coiled TubingConnector/

Back PressureValve

Hydraulic Jar

HydraulicDisconnect

Overshot

TTS Catalog 2012

Documents

Transcript of TTS Catalog 2012