TTIIEEÂÂUU CCHHUUAAÅÅNN VVIIEEÄÄTT NNAAMM &&...
Transcript of TTIIEEÂÂUU CCHHUUAAÅÅNN VVIIEEÄÄTT NNAAMM &&...
TTHHÖÖ VVIIEEÄÄNN ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTIIEEÂÂUU CCHHUUAAÅÅNN
VVIIEEÄÄTT NNAAMM && TTHHEEÁÁ GGIIÔÔÙÙII
TTHHAAÙÙNNGG 0033//22001100
hhttttpp::////lliibb..hhuuii..eedduu..vvnn
2
Tiêu chuẩn ISO
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1
ISO 22745-1:2010 Industrial automation systems and integration -
Open technical dictionaries and their application
to master data - Part 1: Overview and
fundamental principles.
3
2
ISO 22745-11:2010 Industrial automation systems and integration -
Open technical dictionaries and their application
to master data -Part 11: Guidelines for the
formulation of terminology.
2
3
ISO 22745-20:2010 Industrial automation systems and integration -
Open technical dictionaries and their application
to master data - Part 20: Procedures for the
maintenance of an open technical dictionary.
2
4 ISO 26203-1:2010 Metallic materials - Tensile testing at high strain
rates - Part 1: Elastic-bar-type systems.
32
5
ISO 17678:2010 Milk and milk products - Determination of milk
fat purityby gas chromatographic analysis of
triglycerides (Reference method).
22
6 ISO 27202:2010 Fermented milk products - Bacterial starter
cultures - Standard of identity.
11
7
ISO/IEC TR
18018:2010
Information technology - Systems and software
engineering - Guide for configuration
management tool capabilities.
27
8
ISO/TS 21547:2010 Health informatics - Security requirements for
archiving of electronic health records –
Principles.
77
9 ISO/TR 12134:2010 Rubber - Estimation of uncertainty for test
methods - Non-functional parameters.
9
3
10
ISO 5351:2010 Pulps - Determination of limiting viscosity
number in cupri-ethylenediamine (CED)
solution.
19
11
ISO 2135:2010 Anodizing of aluminium and its alloys -
Accelerated test of light fastness of coloured
anodic oxidation coatings using artificial light.
4
12 ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion
testing – Guidance.
14
13 ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible
bonded assemblies.
6
14
ISO 17054:2010 Routine method for analysis of high alloy steel
by X-ray fluorescence spectrometry (XRF) by
using a near-by technique.
24
15 ISO/IEC 14662:2010 Information technology - Open-edi reference
model
61
16
ISO/IEC 27003:2010 Information technology - Security techniques -
Information security management system
implementation guidance.
68
17
ISO 16110-2:2010 Hydrogen generators using fuel processing
technologies - Part 2: Test methods for
performance.
38
18 ISO 26382:2010 Cogeneration systems - Technical declarations
for planning, evaluation and procurement.
27
19 ISO 26482:2010 Hardmetals - Determination of lead and
cadmium content.
9
20 ISO 28620:2010 Medical devices - Non-electrically driven
portable infusion devices.
11
21
ISO 29081:2010 Surface chemical analysis - Auger electron
spectroscopy - Reporting of methods used for
charge control and charge correction.
23
4
22
ISO 10074:2010 Anodizing of aluminium and its alloys -
Specification for hard anodic oxidation coatings
on aluminium and its alloys.
17
23 ISO 3924:2010 Petroleum products - Determination of boiling
range distribution - Gas chromatography method.
24
24
ISO 10993-16: 2010 Biological evaluation of medical devices - Part
16: Toxicokinetic study design for degradation
products and leachables.
11
25 ISO 7117:2010 Motorcycles - Measurement method for
determining maximum speed.
18
26
ISO 15370:2010 Ships and marine technology - Low-location
lighting (LLL) on passenger ships –
Arrangement.
30
27
ISO 17234-1:2010 Leather - Chemical tests for the determination of
certain azo colorants in dyed leathers - Part 1:
Determination of certain aromatic amines
derived from azo colorants.
9
28
ISO 16053:2010 Paints and varnishes - Coating materials and
coating systems for exterior wood - Natural
weathering test.
21
29
ISO/TS 13141:2010 Electronic fee collection - Localisation
augmentation communication for autonomous
systems.
35
30
ISO/tr 7250-2:2010 Basic human body measurements for
technological design - Part 2: Statistical
summaries of body measurements from
individual ISO populations.
53
31 ISO 28238:2010 Compression and injection moulds - Components
for gating systems.
12
5
32 ISO 7885:2010 Dentistry - Sterile injection needles for single
use.
7
33 ISO 10497:2010 Testing of valves - Fire type-testing
requirements.
16
34
ISO 2871-1:2010 Surface active agents - Detergents -
Determination of cationic-active matter content -
Part 1: High-molecular-mass cationic-active
matter.
4
35
ISO 2871-2:2010 Surface active agents - Detergents -
Determination of cationic-active matter content -
Part 2: Cationic-active matter of low molecular
mass (between 200 and 500).
6
36
ISO 25179:2010 Adhesives - Determination of the solubility of
water-soluble or alkali-soluble pressure-sensitive
adhesives
9
37
ISO/IEC 14543-5-
1:2010
Information technology - Home electronic
system (HES) architecture - Part 5-1: Intelligent
grouping and resource sharing for Class 2 and
Class 3 - Core protocol.
250
38 ISO/IEC 14165-
133:2010
Information technology - Fibre Channel - Part
133: Switch Fabric-3 (FC-SW-3).
222
39
ISO 14341:2010 Welding consumables - Wire electrodes and
weld deposits for gas shielded metal arc welding
of non alloy and fine grain steels –
Classification.
12
40 ISO 14344:2010 Welding consumables - Procurement of filler
materials and fluxes.
9
6
41
ISO/IEC 14543-5-
22:2010
Information technology - Home electronic
system (HES) architecture - Part 5-22: Intelligent
grouping and resource sharing for HES Class 2
and Class 3 - Application profile - File profile.
67
42 ISO 24475:2010 Cosmetics - Good Manufacturing Practices -
General training document.
13
43 ISO 15519-1:2010 Specification for diagrams for process industry -
Part 1: General rules.
37
44 ISO 10911:2010 Solid hardmetal end mills with cylindrical shank
– Dimensions.
2
45
ISO 25902-2:2010 Titanium pipes and tubes - Non-destructive
testing - Part 2: Ultrasonic testing for the
detection of longitudinal imperfections.
6
46 ISO 29581-2:2010 Cement - Test methods - Part 2: Chemical
analysis by X-ray fluorescence.
30
47
ISO 29944:2010 Powered industrial trucks and tractors - Brake
performance - Determination of measurement
procedures.
14
48 ISO 27025:2010 Space systems - Programme management -
Quality assurance requirements.
53
49 ISO/TR 12603:2010 Building construction machinery and equipment
–Classification.
14
50 ISO/IEC 14496-
5:2001/Amd 23:2010
Synthesized texture reference software. 1
51 ISO/IEC 14496-
20:008/Amd 2:2010
Technology for scene adaptation. 13
52
ISO 16312-1:2010 Guidance for assessing the validity of physical
fire models for obtaining fire effluent toxicity
data for fire hazard and risk assessment - Part 1:
Criteria.
11
7
53
ISO 14436:2010 Pulps - Standard tap water for drainability
measurements - Conductivity 40 mS/m to 150
mS/m .
6
Tiêu chuẩn Mỹ - ASTM
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 ASTM C76 – 10 Standard Specification for Reinforced Concrete
Culvert, Storm Drain, and Sewer Pipe.
11
2 ASTM C76M – 10 Standard Specification for Reinforced Concrete
Culvert, Storm Drain, and Sewer Pipe (Metric).
11
3 ASTM C231 /
C231M - 09b
Standard Test Method for Air Content of Freshly
Mixed Concrete by the Pressure Method.
10
4 ASTM C330 /
C330M – 09
Standard Specification for Lightweight
Aggregates for Structural Concrete.
4
5 ASTM C506 – 10 Standard Specification for Reinforced Concrete
Arch Culvert, Storm Drain, and Sewer Pipe.
7
6 ASTM C507 – 10 Standard Specification for Reinforced Concrete
Elliptical Culvert, Storm Drain, and Sewer Pipe.
9
7
ASTM C507M – 10 Standard Specification for Reinforced Concrete
Elliptical Culvert, Storm Drain, and Sewer Pipe
(Metric).
10
8 ASTM C834 – 10 Standard Specification for Latex Sealants. 3
9
ASTM C836 /
C836M - 10
Standard Specification for High Solids Content,
Cold Liquid-Applied Elastomeric Waterproofing
Membrane for Use with Separate Wearing
Course.
3
10
ASTM C1028 - 07e1 Standard Test Method for Determining the Static
Coefficient of Friction of Ceramic Tile and Other
Like Surfaces by the Horizontal Dynamometer
Pull-Meter Method.
5
8
11
ASTM C1133 /
C1133M – 10
Standard Test Method for Nondestructive Assay
of Special Nuclear Material in Low Density
Scrap and Waste by Segmented Passive Gamma-
Ray Scanning.
16
12
ASTM C1718 – 10 Standard Test Method for Nondestructive Assay
of Radioactive Material by Tomographic Gamma
Scanning.
13
13 ASTM D841 – 10 Standard Specification for Nitration Grade
Toluene
2
14 ASTM D982 -
05(2009)
Standard Test Method for Organic Nitrogen in
Paper and Paperboard.
3
15
ASTM D1305 -
99(2009)
Standard Specification for Electrical Insulating
Paper and Paperboard-Sulfate (Kraft) Layer
Type.
4
16 ASTM D1786 – 10 Standard Specification for Toluene Diisocyanate. 2
17 ASTM D1871 -
04(2010)
Standard Test Method for Adhesion Between
Tire Bead Wire and Rubber.
5
18 ASTM D1932 -
04(2009)
Standard Test Method for Thermal Endurance of
Flexible Electrical Insulating Varnishes.
5
19
ASTM D2287 -
96(2010)
Standard Specification for Nonrigid Vinyl
Chloride Polymer and Copolymer Molding and
Extrusion Compounds.
4
20
ASTM D2321 – 09 Standard Practice for Underground Installation
of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications.
12
21 ASTM D4986 – 10 Standard Test Method for Horizontal Burning
Characteristics of Cellular Polymeric Materials.
6
22 ASTM D5226 -
98(2010)e1
Standard Practice for Dissolving Polymer
Materials.
7
9
23
ASTM D5288 - 10 Standard Test Method for Determining the
Tracking Index of Electrical Insulating Materials
Using Various Electrode Materials (Excluding
Platinum).
5
24 ASTM D5577 -
94(2010)e1
Standard Guide for Techniques to Separate and
Identify Contaminants in Recycled Plastics.
5
25 ASTM D5680 – 10 Standard Practice for Sampling Unconsolidated
Solids in Drums or Similar Containers.
6
26 ASTM D6320 /
D6320M – 10
Standard Test Methods for Single Filament Hose
Reinforcing Wire Made from Steel.
8
27
ASTM D7251 – 10 Standard Specification for Color and Appearance
Retention of Variegated Color Plastic Siding
Products.
7
28 ASTM D7376 – 10 Standard Practice for Outdoor Evaluation of Wet
Stack Storage Conditions on Coil-Coated Metals.
3
29 ASTM E108 - 10a Standard Test Methods for Fire Tests of Roof
Coverings.
13
30
ASTM E1709 – 09 Standard Test Method for Measurement of
Retroreflective Signs Using a Portable
Retroreflectometer at a 0.2 Degree Observation
Angle.
6
31
ASTM E2688 - 10 Standard Practice for Specimen Preparation and
Mounting of Tapes to Assess Surface Burning
Characteristics.
3
32
ASTM F903 – 10 Standard Test Method for Resistance of
Materials Used in Protective Clothing to
Penetration by Liquids.
10
10
33
ASTM F1154 – 10 Standard Practices for Qualitatively Evaluating
the Comfort, Fit, Function, and Durability of
Protective Ensembles and Ensemble
Components+ .
7
34 ASTM D528-
97(2007)
Standard Test Method for Machine Direction of
Paper and Paperboard (Withdrawn 2010).
2
35
ASTM D589-
97(2007)
Standard Test Method for Opacity of Paper (15°
Diffuse Illuminant A, 89 % Reflectance Backing
and Paper Backing) (Withdrawn 2010).
5
36
ASTM
D645/D645M-
97(2007)
Standard Test Method for Thickness of Paper
and Paperboard (Withdrawn 2010).
3
37
ASTM D646-
96(2007)
Standard Test Method for Grammage of Paper
and Paperboard (Mass Per Unit Area)
(Withdrawn 2010).
5
38 ASTM D722-93(2007
)
Standard Test Method for Grease Resistance of
Paper (Withdrawn 2010).
3
39
ASTM
D774/D774M-
97(2007)
Standard Test Method for Bursting Strength of
Paper (Withdrawn 2010).
4
40
ASTM D778-
97(2007)
Standard Test Methods for Hydrogen Ion
Concentration (pH) of Paper Extracts (Hot-
Extraction and Cold-Extraction Procedures)
(Withdrawn 2010).
4
41 ASTM D824-
94(2007)
Standard Test Method for Rate of Absorption of
Water by Bibulous Papers (Withdrawn 2010).
3
42 ASTM D2482-
97(2007)
Standard Test Method for Surface Strength of
Paper (Wax Pick Method) (Withdrawn 2010).
2
11
43
ASTM D3285-
93(2005)
Standard Test Method for Water Absorptiveness
of Nonbibulous Paper and Paperboard (Cobb
Test) (Withdrawn 2010).
3
44
ASTM D6101-
97(2005)
Standard Test Method for Equivalent Black Area
(EBA) of Dirt in Pulp, Paper and Paperboard by
Image Analysis (Withdrawn 2010).
6
45
ASTM D6125-
97(2007)
Standard Test Method for Bending Resistance of
Paper and Paperboard (Gurley Type Tester)
(Withdrawn 2010).
6
46
ASTM D2413 -
99(2009 )
Standard Practice for Preparation of Insulating
Paper and Board Impregnated with a Liquid
Dielectric.
4
47
ASTM D2463 - 10 Standard Test Method for Drop Impact
Resistance of Blow-Molded Thermoplastic
Containers.
6
48 ASTM D2843 - 10 Standard Test Method for Density of Smoke
from the Burning or Decomposition of Plastics.
10
49
ASTM D2861 -
87(2009)
Standard Test Methods for Flexible Composites
of Copper Foil with Dielectric Film or Treated
Fabrics.
5
50 ASTM D3350 – 10 Standard Specification for Polyethylene Plastics
Pipe and Fittings Materials.
7
51 ASTM D3353 – 10 Standard Test Methods for Fibrous-Insulated
Magnet Wire.
8
52
ASTM D3380 – 10 Standard Test Method for Relative Permittivity
(Dielectric Constant) and Dissipation Factor of
Polymer-Based Microwave Circuit Substrates.
13
53 ASTM D3394 -
94(2009)
Standard Test Methods for Sampling and Testing
Electrical Insulating Board.
10
12
54
ASTM D4877 – 10 Standard Test Method for Polyurethane Raw
Materials: Determination of APHA Color in
Isocyanates.
3
Tiêu chuẩn Nhật- JIS
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1
JIS A1450:2009
Replaces: JIS
A1450:2003
Test methods for raised access floor.
22
2
JIS C 8304:2009
Replaces: JIS C
8304:1994
Small switches for indoor use.
20
3
JIS T 7401-4:2009
Replaces: JIS T 7401-
4:2002
Titanium materials for surgical implant
applications. Part 4: Wrought titanium 15-
zirconium 4-niobium 4-tantalum alloy.
4
4
JIS K
2301:2009/AMD 1
Replaces: JIS K
2301:2008
Fuel gases and natural gas. Methods for chemical
analysis and testing (Amendment).
2
5
JIS G 3126:2009
Replaces: JIS G
3126:2004
Carbon steel plates for pressure vessels for low
temperature service.
15
6
JIS A 5508:2009
Replaces: JIS A
5508:2005
Nails.
26
7
JIS S 3027:2009
Replaces: JIS S
3027:2007
Oil burning bath boilers with water heaters for
domestic use.
36
13
8
JIS H 7001:2009
Replaces: JIS H
7001:2002
Glossary of terms used for shape memory alloys.
13
9
JIS G 0320:2009
Replaces: JIS G
0320:2004
Standard test method for heat analysis of steel
products.
5
10
JIS B 7602:2009
Replaces: JIS B
7602:2002
Calibration and test method for force-proving
instruments.
28
11
JIS G
3315:2009/AMD 1
Replaces: JIS G
3315:2008
Chromium plated tin free steel (Amendment 1).
2
Tiêu chuẩn IEC
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 IEC 60034-1 ed12.0 Rotating electrical machines - Part 1: Rating and
performance.
140
2 IEC 60081-am4 ed5.0
Amendment 4
Double-capped fluorescent lamps - Performance
specifications.
72
3
IEC 60317-15-am1
ed3.0 Amendment 1
Specifications for particular types of winding
wires - Part 15: Polyesterimide enamelled round
aluminium wire, class 180.
4
4
IEC 60317-42-am1
ed1.0 Amendment 1
Specifications for particular types of winding
wires - Part 42: Polyester-amide-imide enamelled
round copper wire, class 200.
5
5 IEC 60456 ed5.0 Clothes washing machines for household use -
Methods for measuring the performance.
141
14
6
IEC 60598-2-20
ed3.0 Luminaires -
Part 2-20
Particular requirements - Lighting chains. 37
7
IEC 60747-14-5
ed1.0
Semiconductor devices - Part 14-5:
Semiconductor sensors - PN-junction
semiconductor temperature sensor.
37
8 IEC 60832-1 ed1.0 Live working - Insulating sticks and attachable
devices - Part 1: Insulating sticks.
94
9 IEC 60832-2 ed1.0 Live working - Insulating sticks and attachable
devices - Part 2: Part 2: Attachables devices.
121
10
IEC 61009-1 ed3.0 Residual current operated circuit-breakers with
integral overcurrent protection for household and
similar uses (RCBOs) - Part 1: General rules.
298
11
IEC 61097-14 ed1.0 Global maritime distress and safety system
(GMDSS) - Part 14: AIS search and rescue
transmitter (AIS-SART) - Operational and
performance requirements, methods of testing
and required test results.
39
12 IEC/TR 61341 ed2.0 Method of measurement of centre beam intensity
and beam angle(s) of reflector lamps.
20
13 IEC 61549-am2 ed2.0
Amendment 2
Miscellaneous lamps. 12
14
IEC 62077 ed2.0 Fibre optic interconnecting devices and passive
components - Fibre optic circulators - Generic
specification.
23
15
IEC/TR 62476 ed1.0 Guidance for evaluation of product with respect
to substance-use restrictions in electrical and
electronic products.
19
15
16
IEC 62497-1 ed1.0 Railway applications - Insulation coordination -
Part 1: Basic requirements - Clearances and
creepage distances for all electrical and
electronic equipment.
107
17 IEC 62497-2 ed1.0 Railway applications - Insulation coordination -
Part 2: Overvoltages and related protection.
24
18 IEC/TR 62541-1
ed1.0
OPC Unified Architecture - Part 1: Overview and
Concepts.
26
19 IEC/TR 62541-2
ed1.0
OPC Unified Architecture - Part 2: Security
Model.
31
20 IEC 62562 ed1.0 Cavity resonator method to measure the complex
permittivity of low-loss dielectric plates.
20
21
IEC 62616 ed1.0 Maritime navigation and radiocommunication
equipment and systems - Bridge navigational
watch alarm system (BNWAS).
17
22 ISO/IEC 14165-133
ed1.0
Information technology - Fibre channel - Part
133: Fibre channel switch fabric-3 (FC-SW-3).
237
23
ISO/IEC 14543-5-1
ed1.0
Information technology - Home electronic
system (HES) architecture - Part 5-1: Intelligent
grouping and resource sharing for Class 2 and
Class 3 - Core protocol.
251
24
ISO/IEC 14543-5-22
ed1.0
Information technology - Home electronic
system (HES) architecture - Part 5-22: Intelligent
grouping and resource sharing for HES Class 2
and Class 3 - Application profile - File profile.
68
25 ISO/IEC 14662 ed3.0 Information technology - Open-edi reference
model.
61
26
ISO/IEC/TR 18018
ed1.0
Information technology - Systems and software
engineering - Guide for configuration
management tool capabilities.
27
16
27
ISO/IEC 27003 ed1.0 Information technology - Security techniques -
Information security management system
implementation guidance.
68
Thư viện Đại học Công Nghiệp TP.HCM đã ký hợp đồng cung cấp thông tin trọn gói với Trung tâm thông tin
khoa học và công nghệ TP.HCM, toàn thể sinh viên, giảng viên và cán bộ nhân viên trong trường có nhu cầu tra cứu
thông tin xin liên hệ trực tiếp:
Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.sesti.gov.vn Email: [email protected]
Lưu ý
1/: Cung cấp thông tin miễn phí (chỉ thanh toán tiền photocopy và giấy in) khi đến gửi yêu cầu thông tin, nhớ mang theo
thẻ sinh viên và thẻ giảng viên.
2/ Nếu bạn đọc không thể đến Trung tâm thông tin khoa học và công nghệ TP.HCM - hãy gửi yêu cầu thông tin cho
Thư viện Đại học Công Nghiệp TP.HCM.
Liên hệ: Thủ thư Phòng Đa phương tiện.
Mọi chi tiết xin liên hê Thư viện ĐHCN TP.HCM.
ĐT: (08)38940390 (130 - 131 -132)
Email: [email protected] - [email protected]
.