TTi-300H - tti-geartec.jp · TTi-300H Product catalog Tokyo Technical Instruments Inc. CNC Gear...
Transcript of TTi-300H - tti-geartec.jp · TTi-300H Product catalog Tokyo Technical Instruments Inc. CNC Gear...
TTi-300H
Product catalog
Tokyo Technical Instruments Inc.
CNC Gear Measuring System
Full Cover (OPTION)
Concept
Easy clamping mechanism▓ Clamping mechanism can be moved up and down smoothly by manual.▓ Setting up of work can be performed easily just by moving center parts up and down.※Electric up and down movement is available as an option
Features:TTi-300H, our new gear measuring machine, is developed
based on an existing model TTi-300E. Our own new measuring
method “NDG” (PAT.P) is adopted and TTi-300H achieved
superior high-precision measurement. By introducing Direct
Drive Motor to rotary shaft, it also achieved high-speed
measurement with maintaining its high accuracy.TTi-300H
is equipped with dustproof cover. This has environmentally-
conscious and space-saving design.Up to 12 module, gear OD
⏀ 350mm can be measured with this machine.
NC System▓ Our original NC unit(BB-4) has been mounted so we can realize its future flexible expansion.
PC System▓ Windows-compliant program allows advanced operational performance and facilitates data analysis.▓ Easy to communicate with other media (LAN-compatible , TRS)
World Top Class in high speed measurement▓ Our own new measuring method “NDG” achieved world’s top class high speed measurement.
Small Module Gear Measurement▓ Continuous Tooth profile/ Lead/ Pitch measurement of 0.2 module gear (External/ Internal tooth) is possible without switching right and left flanks.
Communication Environment▓ Conventionally, RS-232C is used for alternate communication between PC and measuring machine, but by using USB, we could establish an environment of high-speed communications. You can check machine’s operating conditions in real time even during measurement of gears.
Measurement Environment▓ Dustproof cover inhibits mist or dust penetration into a machine maximally
Symmetric construction▓ Every shaft is symmetric to the center of the bed, so that the stable measurement can be ensured.
2
Contents of measurement
Measurements of the tooth profile , lead , and pitch of spur, helical and internal gear
Contents of measurement
Software environment▓ Measured data conversion to PDF▓ Display and output of the work measurement position.▓ Entry of comments such as measurement conditions & processing conditions▓ Enlarged output
【Judgment items】Standard software can evaluate underFollowing various standards▓ JIS ▓ ISO Standards▓ New JIS ▓ AGMA Standards▓ DIN Standard ▓ GB/T Standards
【Measuring mode】Standard measurements : Division into 1 to 4 measurementsAll teeth measurements : 1 to all measurementsPitch measurements : Specified to all teeth measurementsInternal measurements : 1 to all measurementsDivision into three measurement : 1 to all measurementsBias measurements : 1 to all measurementsManual measurements : 1 to any teeth measurements
<Standard mode> <All teeth mode>3
Contents of measurement
Comparative Output▓ As the measuring data have been saved on PC ,you can compare with previous data.▓ As the classification of the process ,you can compare the change level between before and after the heat treatment.
Measuring Set up Monitor▓ Measuring tooth can be set freely.▓ Intermittent gear can be easily set. So the set up of measuring tooth like sector gear can be easier.
Cluster gear MeasurementFully-automatic measurement of Cluster Gear (up to 5 gears) is possible.
Self-diagnostic program【Self-diagnostic】Standard software has self-diagnostic program.Sel f -d iagnost ic wi l l be done fu l l automat ical ly on al l items. The result list will be output and saved.▓ Detector error check▓ Static accuracy check of each axis▓ Optical scale count check▓ Back-rash of axis check▓ Each limit switch check
Contents of measurement
<Self-diagnostic mode> <Compare mode>
4
Option program
▓ It is possible to measure special gear and Gear processing tools measuring etc. (Please refer to software catalogue)▓ The measurement of Cutter face , Lead & Pitch on Hob Cutter is available▓ The serration of SHV cutter is automatically found and it is possible to measure dividing into one to nine teeth.
※ It is possible to meet the any need of development for special programs.
5
<Worm mode >
<HOB mode >
<Shaving mode>
Option program
Specification & Accessories
TTi-300H
6
pecifications & Accessories
Tes itemMeasuring systemMeasurement moduleBase circle diaHelix angleGear widthShaft lengthMax gear weightDrive systemMachine weightPower supplyMeasurement accuracy
TTi-300HSpur/Helical gear internal gear profile , lead , pitch
Electronic generation DDC loop systemm0.2~12
ф300mm(Outer diameter ф350)±65˚°(90�°)
400 mm Max30~570 mm500 kg Max
Constant-current drive1,300 kg
AC 100V 50 /60 Hz 15A0.1μm
● Standard accessoriesElectrical hardware (BB4 system) 1 setSoftware for testing tooth Profile / Lead / Pitch 1 setStylus ( ф 0.5、ф 0.7、ф 1.0、ф 1.25、ф 1.5) 1 setTest gear 1 pcWork drive & fork 1 setTools 1 setOperations manual 1 sheetInspection report 1 sheet
● Optional accessories▓ Floating table▓ Long support (800,1000 mm)▓ Special center▓ Internal holder▓ Extension arm▓ Special stylus (For small module)▓ Peripheral equipment▓ Full Cover● Special Specification:TTi-300FLinear Motor for X, Y, Z axis and Direct Drive Motor for θ axis are used to achieve high-accuracy and high-speed measurement.
( ) : Full Cover size
Dimensions
Compact Camera● Enlaged & Displayed small module gear make it easier for you to place a feeler in position.
Internal measuring● Internal Folder
本 社 : 〒 145-0064 東京都大田区上池台 4 丁目 38 番地 10 号
H e a d o f f i c e : 4-38-10,Kami-ikedai,Ohta-ku,Tokyo, 〒 145-0064
足 利 工 場 : 〒 326-0327 栃木県足利市羽刈町字西原 461 番地
A s h i k a g a P l a n t : 461,Nishihara,Hakari-cho,Ashikaga-shi,Tochigi-ken, 〒 326-0327
名 古 屋 営 業 所 : 〒 465-0061 愛知県名古屋市名東区高針 2 丁目 2417 番地
N a g o y a o f f i c e : 2-2417,Takabari,Nagoya-shi,Aichi-ken, 〒 465-0061
サービスサポートセンター : 〒 145-0064 東京都大田区上池台 4 丁目 38 番 10 号
Service Support Center:4-38-10,Kami-ikedai,Ohta-ku,Tokyo, 〒 145-0064
東 京 テ ク ニ カ ル U S A :Tokyo Technical Instruments USA lnc:297 Kinderkamack Rd.#133Oradell,NJ 07649
Email : [email protected]
TEL : ( 03 )3726-4188
FAX : (03 )3726-1895
TEL : ( 0284 )73-1733
FAX : (0284 )73-4541
TEL : ( 052 )703-6403
FAX : (052 )703-6404
TEL:(03)3728-6047
FAX:(03)3726-1895
TEL:+1-201-634-1700
FAX:+1-201-262-2187
東京テクニカル株式会社Tokyo Technical Instruments Inc.
ISO9001 認 証 取 得
組 織 名 足利工場対象範囲 CNC歯車試験機の設計 開発から製造販売まで
URL http://www.tti-geatec.jp e-mail [email protected]
※ 本仕様は不断の研究∙開発により予告なく变更することがあります ‵予めご了承ください〭 The specfications are subject to change without notice. 201210300