TTC.COMPR.003 - COMPRESSORS5851360.ru/upload/iblock/537/537fb5872619d7f5bd785b27892e626f.pdf ·...

Compressors Compressors 16 February 2004 TTC.COMPR.003

- Applications Catalogue -

Compressors Compressors

ZONE 2

Trucktechnic (Belgium) S.A.

Parc Industriel des Hauts Sarts (ZONE 2) rue Haute Claire, 1

B-4040 Herstal BELGIUM

Tel: ++32-4-278.79.79 Fax: ++32-4-278.10.78

Email: [email protected]

Web site : www.trucktechnic.com

Offices & Warehouse: 3500 m² on two levels


1. Of Original Manufacture, ie by Wabco, Knorr, Bendix, etc.

2. Of Our Own Manufacture, New.

3. Remanufactured in our workshop.

Thus, the 'Same' item may bear one of three different references :

1. KZ.433.1.OR = Made by Bendix

2. T.KZ.433.1 = Made by us

3. KZ.433.1 = Rebuilt by us

All three categories are covered by a One Year Warranty, valid worldwide.

♦ This section will be organised by Vehicle Type, and will only cover the most popular compressors on the market today.

♦ Spare parts sheets will list, as far as space allows, the most popular Manufacturers' Part Numbers covered by the same sheets.

- Page 1 -


Most TT compressors are sold in Europe and are covered by a Pan-European Warranty Sytem whose participants are :

Trucktechnic S.A. : Belgium Leuven Bedrufswagenonderdelen Import : Holland Trond Horg Ellingsen A/S : Scandinavia Trucktechnic France : France Trucktechnic Iberica : Spain GGN di Gorgoglione Nicola : Italy Trucktechnic UK : United Kingdom

Should an Original, TT New, or TT Rebuilt compressor, sold by any of the above Cos, break down in any of these territories, compressors will be replaced "No questions Asked", pending our Warranty Report. Replacement compressors are invoiced, and credited should the warranty be accepted.

No guarantee for excessive oil carry over will be granted on compressors rebuilt by us.

Oil carry-over may be caused by elements outside of our control, see page 6 : "Replacing a Compressor", or by incorrect tolerance between Cylinder Bore and Piston Rings, which is within our control, see pages 4 & 5.

- Page 2 -


Computerised Boring & Honing gives a perfect compressor Bore, everytime.

Correct analysis & reproduction of cylinder Honing Pattern means Less Oil Carry-Over.

Trucktechnic machines will accurately duplicate the original makers specifications.

- Page 4 -


Cross-hatch-angle measurement tool

------------ Feuille de contrôle

de l'angle de honage

Piston & Ring makers do not always deliver to stated tolerances, ...

… consequently Pistons/Rings/Bores

are individually matched, everytime.

- Page 5 -

WHEN REPLACING A COMPRESSOR IT IS IMPORTANT TO MAKE A FEW PRELIMINARY CHECKS PRIOR TO STARTING THE ENGINE.

1) CHECK THE AIR DISCHARGE LINE FOR BLOCKAGE AT LEAST UP TO THE UNLOADER. If the unloader exhaust is carbonned up, the air line will be also. Replace the pipe and check also the line up to the 4 - circuit protection valve. 2) CHECK THE COMPRESSOR AIR INLET FILTER IS IN GOOD CONDITION. Replace if necessary. • When using a dry filter, replace the cartridge when it reaches the maximum permitted pressure of 0.05 bar. • When using an oil filter drop, it is necessary to clean every 2 weeks and once per month change the oil.

With the engine still warm, the minimum oil-pressure should be 0.5 bar. 3) BEFORE RE-CONNECTING THE OIL FEED LINE, pour in a little engine oil. This will prevent the crankshaft from turning ‘dry’ on starting. The same can be done in the air inlet to lubricate the compressor bore. 4) WATER-COOLED COMPRESSORS - WATER CIRCUITS should be properly purged as air pockets quickly lead to overheating. Minimum flow of cooling liquid should be 5 litres per minute. 5) FOR VEHICLES WORKING IN RIGOROUS CONDITIONS such as mines , quarries, motorway construction, extra care should be taken to ensure correct filtration, as abrasive dust particles cause premature piston ring wear. 6) WHEN REPLACING A COMPRESSOR DRIVEN BY A GEAR, it is advisable to check the gear for wear. Also, ensure the correct fixing to the crankshaft end. 7) WHEN RETURNING THE OLD COMPRESSOR, ensure that the crankshaft end thread is adequately protected.

- Page 6 -


(*) For Information on less common vehicle compressors (ie: Ford, Liebherr, Poclain, Van Hool, …) consult

COMPRESSORS : By Vehicles (*)

DAF page 8

DAIMLER-BENZ page 9

IVECO/FIAT/DEUTZ page 10

MAN page 11

RVI page 12

SCANIA page 13

VOLVO page 14

REPAIR KITS : See Index by Compressor page 15

………….

………….

………….

………….

………….

………….

………….

………….

INDEX of NEW COMPRESSORS available from TT.

- Page 7 -


Makers n° View TT n° TT Spare Parts (see page n°)

911.501.016 1 01.34.002 40

911.504.052 2 01.36.001 42

911.505.051 3 01.37.002 41

LK.1525 4 01.03.030 28

LK.1539 4 01.13.031 28

LK.3904 5 01.11.004 31

LP.4823 6 01.46.005 24

1 2 3

4 5 6

- Page 8 -



411.033.808.2 1 01.21.003 20

442.130.32.19 2 01.28.001 21

411.034.501 3 01.01.001 44

411.141.640 4 01.18.004 45

411.142.816 5 01.03.003 44

LK.1511 6 01.13.023 28

LK.1527 7 01.13.024 28

LK.1808 8 01.13.026 29

402.130.06.08 9 WSK.97.W 20

442.130.00.08 10 WSK.97.A 20

1 2

3 4 5 6 7

8

9

10

- Page 9 -


Makers n° View TT n° TT Spare

Parts (see page n°)

411.043.805 2 01.02.004 -

411.141.845 3 01.18.005 45 411.143.845 4 01.04.003 44 411.143.881 5 01.04.002 - 911.145.050 6 01.06.003 46 911.145.500 6 01.06.002 46 911.503.050 7 01.35.001 - 911.506.500 - 01.47.002 -

AC.61 * 8 01.07... - AC.63 * 8 01.08... - AC.67 * 9 01.09... 34

ACX.68 * 10 01.40... 35 ACX.69 * 11 01.40... - AC.75 * 12 01.39... 33

ACX.79 * - 01.41... - ACX.82 * 13 01.42... 36 ACX.83 * 14 01.43... 36 LK.1300 15 01.13.001 28 LK.1500 15 01.13.011 28 LK.1503 15 01.13.012 28 LK.1900 16 01.13.015 29 LK.1901 16 01.13.003 29 LK.3904 17 01.11.004 31

1194194 (Stralis" 1 01.57.001 -

LP.4924 18 01.46.012 -

1 2 3 4

5 6 7 8

9 10 11 12

14 15

16

13

17

(*) for AC… compressors, please consult our ID guide page 47

18

- Page 10 -



411.033.808 1 01.21.003 20

411.141.910 2 01.18.008 45

411.142.960 3 01.03.004 44

51.54000.7058 4 01.05.001 20

51.54000.7074 5 01.05.002 20

51.54000.7079 6 01.33.001 20, 48

LK.1506 7 01.13.021 28

LK.1510 7 01.13.022 28

LK.3812 8 01.11.011 -

LK.3927 9 01.11.005 -

LK.4921 10 01.55.001 -

LP.4919 11 01.46.011 -

51.54105.6006 12 WSK.97.A 20

51.54105.6008 13 WSK.97.W 20

- 14 - 20, 48 - 15 - 20, 48

1 2 3 4 5 6 7

8 9 10 11 12 13

(*) For twin compressor exploded

views, see page 48

*

*

*

14

15

- Page 11 -


Makers n° View TT Unit n° TT Spare Parts (see page n°)

101.3383.000 1 01.32.010 37

101.3393.000 2 01.32.002 37

911.004.896 3 01.27.002 -

LP.1567 4 01.15.007 28

LP.1577 4 01.15.011 28

LP.1585 4 01.15.013 28

LP.1588 4 01.15.014 28

LP.1596 5 01.15.001 28

LP.3832 6 01.16.007 32

LP.3842 7 01.16.005 -

TSK.9.C 8 01.62.001 38

1 3 4

5 6 7 8

2

- Page 12 -



271721 1 01.31.001 17

KZ.1228.1 2 01.48.001 19

KZ.396 2 01.49.001 19

KZ.642.2 2 01.45.002 19

KZ.996.2 3 01.10.002 19

LP.4814 4 01.46.003 23

LP.4815 4 01.46.004 23

LP.4844 5 01.46.025 26

LP.4964 5 01.46.016 26

LP.4965 5 01.46.023 26

1 2 3

4 5

- Page 13 -



KZ.433.1 (15.5) 1 01.44.001 19

280728 (TF-400) 2 01.31.002 16

280737 (TF-500) 3 01.31.003 17

286104 (TF-501) 4 01.31.004 18

289257 (TF-700) 5 01.31.005 17

911.505.150 6 01.38.001 43

LK.3802 7 01.11.009 31

LK.3813 7 01.11.001 31

LK.3930 7 01.11.019 30

LP.4812 8 01.46.001 23

LP.4813 8 01.46.002 23

LP.4825 9 01.46.006 25

LP.4930 10 01.46.008 26

LP.4934 11 01.46.007 26

1 2 3 4 5 6

7 8 9 10 11

- Page 14 -


Compressors to repair Page n° 101.3078.000 37 101.3080.000 37 101.3081.000 37 101.3083.000 37 101.3084.000 37 101.3085.000 37 101.3099.000 37 101.3278.000 37 101.3281.000 37 101.3283.000 37 101.3284.000 37 101.3285.000 37 101.3378.000 37 101.3383.000 37 101.3393.000 37 271721 : Tuflo 500 17 271806 : Tuflo 400 16 277057 : Tuflo 500 17 280728 : Tuflo 400 16 280737 : Tuflo 500 17 284789 : Tuflo 500 17 286017 : Tuflo 501 18 286104 : Tuflo 501 18 289257 : Tuflo 700 17 411.034… 44 411.140… 45 411.141… 45 411.142.711 44 411.142.805 44 411.142.816 44 411.142.818 44 411.142.845 44 411.143.001 44 411.143.002 44 411.143.805 44 411.143.818 44 411.143.844 44 411.143.845 44 911.145.050 46 911.145.500 46 911.501.011 40

Compressors to repair Page n° 911.501.015 40 911.501.055 40 911.501.056 40 911.501.057 40 911.501.058 40 911.501.059 40 911.501.060 41 911.501.061 41 911.501.062 40 911.501.063 40 911.504… 42 911.505.050 41 911.505.051 41 911.505.150 43 AC.67 (with plate) 34 AC.68 35 AC.75 (with plate) 33 AC.75 (without plate) 33 ACX.68 35 ACX.80 36 ACX.82 36 ACX.83 36 Clayton Dewandre : SC6 22 EL.1300 (MIDLAND) 39 EL.1300 (VARGA) 39 EL.1600 (MIDLAND) 39 EL.1600 (VARGA) 39 KZ.1228 : 15.5 Comp. 19 KZ.396 : 15.5 Comp. 19 KZ.433 : 15.5 Comp. 19 KZ.642 : 15.5 Comp. 19 KZ.966 : 15.5 Comp. 19 LK.13.. 28 LK.15.. 28 LK.1808 29 LK.1813 29 LK.1900 29 LK.1901 29 LK.3802 31 LK.3901 31 LK.3902 31

Compressors to repair Page n° LK.3904 31 LK.3930 30 LK.3947 30 LK.3959 30 LK.3965 30 LK.3966 30 LP.3832 32 LP.3833 32 LP.3843 32 LP.3852 32 LP.3857 32 LP.3862 32 LP.4812 (Volvo) 23 LP.4813 (Volvo) 23 LP.4814 (Scania) 23 LP.4815 (Scania) 23 LP.4823 (Daf) 24 LP.4825 (Volvo) 25 LP.4930 (Volvo) 26 LP.4934 (Volvo) 26 LP.4957 (Scania) 26 LP.4962 (Scania) 26 LP.4963 (Scania) 26 LP.4964 (Scania) 26 LP.4967 (Volvo) 26 Mercedes 21 MIDLAND : EL.1300 39 MIDLAND : EL.1600 39

SC6 : Clayton Dewandre 22 T.51.54000.7058 20 T.51.54000.7074 20 Tuflo 400 16 Tuflo 500 17 Tuflo 501 18 Tuflo 600 17 Tuflo 700 17 Universal Gasket & Fitting Kit 19

VARGA : EL.1300 39 VARGA : EL.1600 39

RVI : TSK.9.C 38

- Page 15 -


280728 TUFLO 400

TUFLO 400 BSK.1 : STD

BSK.3

BSK.5 STD Only

Ringsets

Photographed content is followed as closely as possible, but not guaranteed

This content applies to Kit Codes from 13114, and higher

- Page 16 -


TUFLO 500 TUFLO 600 TUFLO 700

BSK.15

ONE LUG

ONE LUG TWO LUGS Description BSK.12 BSK.13 STD

BSK.15.4

Valve seat Order separately :

238634.A For two piece cylinder head only

TUFLO 500 BSK.11.RP.STD : STD BSK.11.RP.020 : + 020 BSK.11.RP.040 : + 040

TUFLO 600 & 700 BSK.22.RP.STD : STD BSK.22.RP.020 : 020

ALUMINIUM

STD Ringsets only for TUFLO 500 compressors

CAST IRON

STD Ringsets only for TUFLO 500 compressors


TUFLO 500 BSK.10.F : STD

TUFLO 500 BSK.11.RPF.STD : STD BSK.11.RPF.010 : + 010 BSK.11.RPF.020 : + 020

( ) Circlips (a), Wrist pin Buttons (b) or Lock Pins (c) may be used.

Part n° 236118 : available separately



- Page 17 -




- Page 18 -

TUFLO 501

BSK.15.3

ALUMINIUM CAST IRON


5-Ring

TUFLO 501 BSK.19.RP.STD : STD BSK.19.RP.020 : + 020 BSK.19.RP.040 : + 040

3-Ring

TUFLO 501 BSK.19.RPF.STD : STD BSK.19.RPF.010 : + 010 BSK.19.RPF.020 : + 020

TUFLO 501 BSK.18.F : STD

( ) Circlips (a), Wrist pin Buttons (b) or Lock Pins (c) may be used.

Part n° 236118 : available separately




- Page 19 -

15.5

BSK.30.RP.STD : STD

BSK.30.RP.010 : + 010

BSK.30.RP.020 : + 020

BSK.30.RP.030 : + 030

BSK.30.RP.040 : + 040

Ø 12.5mm Ø 15mm

BSK.28 : STD BSK.28.2 : + 020

BSK.28.1 : + 010 BSK.28.3 : + 030

* BSK.27.10 : 11 holes Seat size : Large valves Ø 30mm

Filter Assy (old models)

BSK.76

Universal Gasket/Fittings Kit

*

For KZ.642… & KZ.966… & KZ.1228.1… series compressors, cut the gasket as shown here.

BSK.27.5

BSK.27.6

BSK.27.8

BSK.27.3

BSK.27.7

KW.1491.1 : Valve seats to be ordered separately

or included in kit BSK.27.5P




- Page 20 -

T.51.54000.7058 Complete Compressor Assy (Air Cooled Cylinder Head)

T.51.54000.7074 Complete Compressor Assy

(Water Cooled Cylinder Head)

Valve Plate Assy suitable for Bosch & Wabco Water Cooled Cylinder

Head (Thick Plate : 13,8 mm)

BOSK.2.4

Use parts A & B for Bosch & Wabco

Air Cooled Cylinder Head

Use parts A & C for Bosch & Wabco

Water Cooled Cylinder Head

Use parts A & D for Knorr

Water Cooled Cylinder Head

Universal Kit for Knorr, Bosch & Wabco Air & Water Cooled Cylinder Heads • For Wabco Air Cooled Cylinder Heads see page 43 • For Knorr Air Cooled Cylinder Heads see pages 28 & 29

Barrel & Piston Assys (C/W Rings) WSK.97.A

Ringset only

(for both types)

WSK.97.W

Air Cooled Water Cooled

WSK.93.1

BOSK.2C

T.411.033.808 Water Cooled Cylinder Head

Replaces both : • T.411.033.801 Thin Plate • T.411.033.806 Thick Plate

Thick Plate : 13,8 mm

Complete Cylinder Head Assembly supplied with Gasket

T.411.033.808




- Page 21 -

Cylinder Head Assy

T.442.130.32.19

BOSK.2.7

BOSK.2.8




- Page 22 -

CDSK.3.C

CDSK.3.4 = SC6 Air Cooled

PCSA.98

CDSK.3.1.H

GA.29129 on special request

CDSK.3.3 = SC6 Water Cooled

Water Cooled

Air Cooled

CDSK.3.L

CDSK.3.P

CDSK.4.2 = SC6 Ringset

CDSK.3.CP




- Page 23 -

LP.4812/13 VOLVO LP.4814/15 SCANIA

A

B

Size Complete Piston sets available

STD KSK.9.RP.STD +020 KSK.9.RP.020 +040 KSK.9.RP.040

(A+B) x 2 Piston Kit

(For 1 Compressor)

KSK.9.RP.STD

Complete Piston Set Only Standard Ringsets available

KSK.9.3.STD

(A) x 2 Ringset (For 2 Pistons)

KSK.9.2C

KSK.9.2C.CP

Complete Plate

KSK.9.2C.CR




- Page 24 -



LP.4823 DAF

A

B


(For 1 Compressor)

KSK.9.RP.STD


KSK.9.3.STD

(A) x 2 Ringset

(For 2 Pistons)

KSK.9.2D

KSK.9.2C.CR

KSK.9.2D.CP

Complete Plate For LP.4823 & LP.4850




- Page 25 -



KSK.9.2E

LP.4825 VOLVO A

B


(For 1 Compressor)

KSK.9.RP.STD


KSK.9.3.STD


See REBUILDING PROCEDURE

KSK.9.2E.CP

Complete Plate

STD pins

6 mm

Special Oversize pins

8 mm

KSK.9.2C.CR




- Page 26 -

LP.4930/4934/4967 VOLVO

A

B


(For 1 Compressor)

KSK.92.RP.STD


KSK.9.5.STD

KSK.9.2F

STD pins 6 mm

Special Oversize pins 8 mm

KSK.9.4.STD

For 4-segment Pistons

For 3-segment Pistons




KSK.9.2F.CP

Complete Plate

LP.4957/4962/4963/4964 SCANIA

See REBUILDING PROCEDURE

KSK.9.2F.CR


♦ Excessive wear shown in photo A will preclude effective repair.

♦ Two special pins provided in TT Repair Kit have been specially made to allow milling to ø 8 mm as shown in the photos B & C.

REBUILDING PROCEDURE OF LP.4930 - 4934 - 4967 - 4825

COMPRESSORS

Milling Operation Before Repair Ø : 6 mm

After Repair

Ø : 8 mm

Ø : 8 mm

NEW TT pins (Supplied in kits)

C

B A

Note We recommend not using the "Energy Saving" device if repair is too difficult. For details, consult TT.

Maximum Depth not to exceed : 1,60 mm

Original pins (Supplied in kits)



- Page 27 -




- Page 28 -

KSK.94.RP.STD

KSK.94.R3.STD

LK.13.. LK.15..

KSK.9.3.STD

KSK.9.RP.STD

LK.13.. & LK.15..

KSK.94

KSK.94.CH Complete Cylinder Head, supplied with gasket & Valve

KSK.94.CR

KSK.94.BU

KSK.94.CB

LK.13..

LK.15..

KSK.94.1C

• Please note that KSK.94.R.STD (4 rings kit) is obsolete.

• Order complete piston KSK.94.RP.STD

Parts are common to Twin compressors :

Each kit here is for 2 compressors

CH = Cylinder Head CB = Cylinder Block CR = Conn Rod BU = Bushing




- Page 29 -

KSK.95.R.STD

KSK.95.RP.STD

KSK.95.CR

KSK.95.BU

KSK.95

KSK.95.CH Complete Cylinder Head, supplied with gasket & Valve

KSK.95.CB

LK.1808 LK.1813 LK.1900 LK.1901

KSK.95.1C

CH = Cylinder Head CB = Cylinder Block CR = Conn Rod BU = Bushing




- Page 30 -

KSK.95.R.STD

KSK.95.RP.STD

KSK.99.BU

KSK.99

KSK.99.1

LK.3930 LK.3947 LK.3959 LK.3965 LK.3966




- Page 31 -

KSK.100

LK.3802 LK.3914 LK.3901 LK.3916 LK.3902 LK.3918 LK.3904 LK.3921 LK.3907 LK.3925 LK.3908 LK.3933 LK.3910 LK.3941

LK.3813

for compressors use A & C

for compressors use B & C

KSK.100.1 for compressors only

KSK.95.R.STD

KSK.95.RP.STD

KSK.100.BU

for compressors &




- Page 32 -

KSK.101

LP.3832 LP.3833 LP.3843 LP.3852 LP.3857 LP.3862

KSK.101.1

KSK.101.RP.STD = SEB.22224

KSK.101.RP.020 = SEB.22225




- Page 33 -

KSK.95.R.STD

KSK.95.RP.STD

KSK.102.CR

KSK.102

KSK.102.CB

LP.3812 LP.3821 LP.3842

KSK.95.1C CB = Cylinder Block CR = Conn Rod




- Page 34 -

AC.75

MSK.12.1 Without

plate

MSK.12 With plate

MSK.12.CH

MSK.12.CR

MSK.12.RP.010 MSK.12.RP.020

MSK.12.R.010 MSK.12.R.020




- Page 35 -

AC.67

MSK.14

With plate

MSK.14.CH MSK.14.CR

MSK.14.RP.STD MSK.14.RP.010 MSK.14.RP.020 MSK.14.R.STD




- Page 36 -

AC/ACX.68 MSK.16

MSK.16.1

MSK.16.R.STD

MSK.16.RP.STD

MSK.16.RP.020




- Page 37 -

ACX.80/82/83

MSK.90 ACX.80/82/83...




- Page 38 -

ACX.80/82/83

MSK.90.RP.STD MSK.90.RP.020 ACX.80/82

MSK.90.STD ACX.80/82

MSK.91.RP.STD MSK.91.RP.010 MSK.91.RP.020 ACX.83.A-AS-B

MSK.91.R.STD ACX.83.A-AS-B

MSK.92.RP.STD MSK.92.RP.010 MSK.92.RP.020 ACX.83.D-DK-DX

MSK.92.R.STD ACX.83.D-DK-DX




- Page 39 -

PDSK.8

101.3078.000 101.3080.000 101.3081.000 101.3083.000 101.3084.000 101.3085.000 101.3099.000 101.3277.000 101.3278.000 101.3281.000 101.3283.000 101.3284.000 101.3285.000 101.3378.000 101.3383.000 101.3393.000

MSK.16.RP.STD

MSK.16.R.STD

MSK.16.RP.020




- Page 40 -

Complete Assy

Always replace Seats

TSK.9.C

TSK.9.CB

TSK.9.RP.STD

TSK.9

TSK.9.CR

TSK.9.CS TSK.9.R.STD

TSK.9.CH




- Page 40 -

LP.4845

KSK.9.2H

KSK.9.2H for

LP.4819 LP.4840 LP.4827 LP.4843 LP.4828 LP.4845 LP.4831 LP.4846 LP.4833 LP.4848 LP.4838 LP.4849




- Page 41 -

EL.1300 EL.1600

VSK.10

VSK.12 STD Bearing Set

Ringset STD only

Ringset &

Piston Kit VSK.11 STD

VSK.11.2 +020

VARGA

VSK.6

VSK.1 Head Kit




- Page 42 -

WSK.9.C

911.501.011 911.501.015 911.501.055 911.501.056 911.501.057 911.501.058 911.501.059 911.501.062 911.501.063

WSK.95.RP.STD WSK.95.B.STD

Complete Piston sets available

WSK.95.RP.STD WSK.95.RP.010 WSK.95.RP.020 WSK.95.RP.040

Complete Piston Set

Only Standard Ringsets available

Available separately

Part n°: 911.501.342.4

Part n°: TP.1989





- Page 43-

WSK.9.D

911.501.060 911.501.061 911.505.050 911.505.051



WSK.95.RP.STD WSK.95.RP.010 WSK.95.RP.020 WSK.95.RP.040

Complete Piston Set


Part n°: 911.501.342.4

Part n°: TP.1989






- Page 44 -

911.504...

KSK.9.3.STD Complete Piston Set


WSK.90.RP.STD

Complete Piston sets available WSK.90.RP.STD WSK.90.RP.020 WSK.90.RP.040

WSK.90.C




- Page 45 -

*

* : New cylinder head gasket with 2 additional holes is available under the following reference 897.334.476.4 and will be included in kits from code 11754 & higher

WSK.95.C



WSK.95.RP.STD WSK.95.RP.010 WSK.95.RP.020 WSK.95.RP.040 Complete Piston Set


911.505.150




- Page 46 -

WSK.99.R.STD

WSK.99

WSK.99.1

WSK.99.CH Complete Cylinder Head,

supplied with gasket & Valve

WSK.92.A

411.034.501 411.034.531 411.034.541 411.034.561 411.034.832

WSK.93.1 STD Ringset

WSK.93.3 WSK.99.RP.STD

WSK.99.BU

411.143.001 411.143.602 411.143.805 411.143.818 411.143.844 411.143.845

411.142.711 411.142.805 411.142.816 411.142.818 411.142.845




- Page 47 -

WSK.100.R.STD

WSK.100.RP.STD

WSK.100.BU

WSK.100

WSK.100.1

WSK.100.CH Complete Cylinder Head, supplied with gasket & Valve

411.140.002 411.140.003 411.140.501 411.140.507 411.140.801 411.140.840 411.140.841 411.140.845 411.140.847 411.140.846 411.140.910 411.140.930

411.141.000 411.141.002 411.141.500 411.141.602 411.141.640 411.141.702 411.141.711 411.141.713 411.141.804 411.141.814 411.141.816 411.141.818




- Page 48 -

WSK.101

911.145.050

911.145.500

WSK.100.R.STD

WSK.100.RP.STD


TT N° Description Ref Marelli Rem Xref Wabco

AC.61 AC.61.ZA

ACX.61.ZA ACX.61.ZAG

AC.61.1 AC.61.ZC

ACX.61.ZC ACX.61.ZCG

AC.63 Rear Lubrication AC.63.ZA

AC.63.1 Lubrication via the Flange AC.63.ZB

ACX.63.ZBG

AC.67 Without Rear Flange

AC.67 AC.67.A

AC.67.AA 911.006.501.0 ACX.67.A

ACX.67.AA ACX.67.AAG

AC.67.1 With Rear Flange (Right)

AC.67.BA AC.67.BAG ACX.67.BA

ACX.67.BAG

AC.67.2 With Rear Flange (45°) AC.67.AZ AC.67.AX

AC.67.AZG

AC.68 ACX.68.A 911.145.060.0 ACX.68.D

AC.68.1 With ESS ACX.68.AS

AC.69 Without ESS

ACX.69.A 911.145.560.0 ACX.69.CX ACX.69.D

ACX.69.DX AC.69.1 With ESS ACX.69.AS

AC.75 Internal Lubrication

AC.75.ZB Crankshaft with counterweight AC.75.ZD AC.75.ZF 911.503.050.0 AC.75.ZG ACX.75.ZF 911.503.050.0

ACX.75.ZFG ACX.75.ZGG ACX.75.ZM

ACX.75.ZMG AC.75.1 Rear Lubrication AC.75.ZA Crankshaft with counterweight - diam 28 AC.79 With Rear Flange (Right) AC.79.C AC.80 With Rear Flange (Right) AC.80.A Same Cylinder Head as AC.75

AC.80.1 With Rear Flange (Right) AC.80.AA Same Cylinder Head as AC.82/83 AC.82 Without ESS AC.82.A 911.506.050.0

AC.82.1 With ESS AC.82.AS

AC.83 Without ESS AC.83.A Replaced by AC.83.B AC.83.1 With ESS AC.83.AS AC.83.2 AC.83.D Replace AC.83.B (with sump plug for oil change)

Without ESS

- Page 49 -


For REPAIR KITS, see page n° 20

Complete Compressor Assy (Water Cooled Cylinder Heads)

Complete Compressor Assy (Water Cooled Cylinder Heads)

Complete Compressor Assy

(Air Cooled Cylinder Heads)

For UNITS, see page n° 11

51.54000.7079

- Page 50 -

VISIT OUR WEBSITE

DISTRIBUTORS WORLDWIDE - Consult TT

TRUCKTECHNIC (Belgium) S.A.

Parc Industriel des Hauts Sarts Rue Haute Claire, 1

B-4040 Herstal BELGIUM

Tel: ++32 4 278 79 79 Fax: ++32 4 278 10 78

Email : [email protected] Web: www.trucktechnic.com

Affiliated Companies Trucktechnic (France) S.a.r.L

Zone d’activité des Bosquets 2 95540 Mery sur Oise

france FRANCE

france Tel: ++33 1 30 360333 Fax: ++33 1 30 360277

france

Email: [email protected]

Trucktechnic Iberica S.L. C. Juan de la Cierva 3/K

Poligono Industrial Can Castells E-08420 Canovelles

spain SPAIN

france Tel: ++34 93 849 0344 Fax: ++34 93 846 6977

france Email: [email protected]

Web: http://www.trucktechnic.net

Offices & Warehouse: 3500 m² on two

TTC.COMPR.003 - COMPRESSORS5851360.ru/upload/iblock/537/537fb5872619d7f5bd785b27892e626f.pdf ·...

Documents

Transcript of TTC.COMPR.003 - COMPRESSORS5851360.ru/upload/iblock/537/537fb5872619d7f5bd785b27892e626f.pdf ·...