Tsunami® TSU-1000 Installation Notes - SoundTraxx · 2019. 7. 17. · SoundTraxx CurrentKeeper™...
1
SoundTraxx CurrentKeeper™ Tsunami® TSU-1000 Installation Notes 141 Burnett Drive • Durango, CO 81301 Phone: (970) 259-0690 • Toll Free: 888-789-7637 • Fax: (970) 259-0691 Email: [email protected] • Website: www.soundtraxx.com ©2017 Throttle Up! Corp. All Rights Reserved Overview This application note describes how to install a CurrentKeeper onto a Tsunami TSU-1000 Digital Sound Decoder™. Bill of Materials P.N. Description TSU-1000 Digital Sound Decoder 810140 CurrentKeeper Tools You Will Need ■ 25W Soldering Iron ■ Rosin Core Solder ■ Wire Strippers ■ Wire Cutters ■ Heat Gun or Blow Dryer Installation 1. Using wire cutters, remove the factory-installed capacitor from the Tsunami TSU-1000 Digital Sound Decoder by clipping the red and black wires, leaving about 3” of the black capacitor wire still attached to the decoder. The red capacitor wire may be removed and discarded. 2. Prepare the CurrentKeeper for installation: Using wire cutters, trim the blue and black wires to about 3” . 3. Strip and tin the ends of the wires on the CurrentKeeper, as well as the Tsunami’s black wire from the capacitor removed in Step 2 and the Tsunami’s blue wire (Function Common). 4. Slide a piece of the black heat-shrink tubing (included) over each of the CurrentKeeper’s wires. Solder the blue CurrentKeeper wire to the blue decoder wire and the black CurrentKeeper wire to the black decoder capacitor wire. Slide the pieces of heat-shrink tubing over the connections and heat to insulate. Note: Make sure you are soldering to the black capacitor wire remaining from Step 1 and not the decoder’s black wire for rail pickups. 5. Secure in place with Kapton® tape (or equivalent) if desired. Note: Once placed on the track, it will take about 2 minutes for the CurrentKeeper to be fully charged. Wiring Diagram TSU-AT1000 TSU-1000 CurrentKeeper Function Common
Transcript of Tsunami® TSU-1000 Installation Notes - SoundTraxx · 2019. 7. 17. · SoundTraxx CurrentKeeper™...
-
SoundTraxx CurrentKeeper™Tsunami® TSU-1000 Installation Notes
141 Burnett Drive • Durango, CO 81301Phone: (970) 259-0690 • Toll Free: 888-789-7637 • Fax: (970) 259-0691
Email: [email protected] • Website: www.soundtraxx.com©2017 Throttle Up! Corp.All Rights Reserved
OverviewThis application note describes how to install a CurrentKeeper onto a Tsunami TSU-1000 Digital Sound Decoder™.
Bill of MaterialsP.N. Description TSU-1000 Digital Sound Decoder810140 CurrentKeeper
Tools You Will Need■ 25W Soldering Iron■ Rosin Core Solder■ Wire Strippers■ Wire Cutters■ Heat Gun or Blow Dryer
Installation1. Using wire cutters, remove the factory-installed
capacitor from the Tsunami TSU-1000 Digital Sound Decoder by clipping the red and black wires, leaving about 3” of the black capacitor wire still attached to the decoder. The red capacitor wire may be removed and discarded.
2. Prepare the CurrentKeeper for installation: Using wire cutters, trim the blue and black wires to about 3”.
3. Strip and tin the ends of the wires on the CurrentKeeper, as well as the Tsunami’s black wire from the capacitor removed in Step 2 and the Tsunami’s blue wire (Function Common).
4. Slide a piece of the black heat-shrink tubing (included) over each of the CurrentKeeper’s wires. Solder the blue CurrentKeeper wire to the blue decoder wire and the black CurrentKeeper wire to the black decoder capacitor wire. Slide the pieces of heat-shrink tubing over the connections and heat to insulate. Note: Make sure you are soldering to the black capacitor wire remaining from Step 1 and not the decoder’s black wire for rail pickups.
5. Secure in place with Kapton® tape (or equivalent) if desired.
Note: Once placed on the track, it will take about 2 minutes for the CurrentKeeper to be fully charged.
Wiring Diagram
TSU-750
TSU-AT1000
TSU-BW1000Side A
Side B
TSU-GN1000
TSU-IM1000
TSU-KT1000Side A
Side B
TSU-1000
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
CurrentKeeper
1
2
3
4
10
9
8
75 6
CurrentKeeper
Func
tion
Com
mon
Func
tion
Com
mon
