TSE INDUSTRIES, INC.
Transcript of TSE INDUSTRIES, INC.
TSE INDUSTRIES, INC. A Passion for Polymers.™
www.tse-industries.com
4370 112th Terrace North
Clearwater, Florida 33762-4902, USA
(727) 573-7676 (800) 237-7634 (727) 572-0487 Fax
• Founded 1962 by
Walt and Helen Klingel
• 3rd Generation Family Owned &
Operated
• ISO 9001-Certified since 1999
• 255 Employees
• 6 Operating Locations in
Clearwater, FL
• Annual Sales: $75MM
About TSE
Walter C. Klingel, Sr.
1913 - 1999
Helen Klingel
1917 - 2003
(L to R)
Rob Klingel Jr., President,
Engineered Polymers Division, Rob
Klingel, Sr., CEO,
Brad Klingel, President, TSE-OK,
and Rick Klingel, President,
TSE Industries
TSE Industries, Inc.
5260 113th Ave North
Clearwater, FL 33760 USA
727-573-7676
800-237-7634
www.tse-industries.com
TSE Industries, Inc.
4370 112th Terrace North
Clearwater, FL 33762 USA
727-573-7676
800-237-7634
www.tse-industries.com
TSE-OK, LLC
4421 110th Ave North
Clearwater, FL 33762 USA
727-456-2890
866-652-2557
www.tse-ok.com
WHK BioSystems, LLC
11345 53rd Street North
Clearwater, FL 33760 USA
727-209-8412
855-WHK-BIO1
(855-945-2461)
www.whkbio.com
TSE 1 TSE 2 TSE-OK WHK BioSystems
Our Locations
Crompton Millables
Acquisition
Adiprene/Vibrathane
TSE History
Plastics Division
Rubber Division
Millathane
Division
Specialty
Chemical Division
Crystal Division Sold to ITW 2008
CPT/C-Flex Division Sold to Saint-Gobain 2007
Composites Division TSE-OK Division 100% Owned
Subsidiary
WHK BioSystems TSE & Ottensteiner Kunstoff
Joint Venture (TSE-OK)
1962 1968 1976 1992 1993 1994 2002 2003 2012 2014
Executive Leadership
President
Richard “Rick” Klingel
Chief Financial
Officer
David J. Tottle, CPA
President
C.A.S.E.
Richard “Rick” Klingel
President, EPD &
WHK BioSystems
Robert R. Klingel, Jr.
President
TSE-OK
Louis “Brad” Klingel
Corporate Counsel
Richard T. Catalano,
Esq.
HR Manager
Michelle Hintz-
Prange, PHR
Board of Advisors
Chief Executive
Officer
Robert R. Klingel, Sr.
• ISO 9001 Certified since 1999
• Incoming goods, in-process and final
product validation
• Advanced analytical and automated
clinical chemistry analyses
• Statistical Process Control and Statistical
Quality Control for all products
Certifications
Custom Rubber
Molding &
Extrusion
Cast Urethane
Parts
Engineered Polymers Division
Processing Capabilities
• Injection, Compression & Transfer Molding
• Extrusion
– Cold Feed and Hot Feed
• Autoclaves, Steam and Hot Air
• Rubber Mills (60” and 48”)
• Casting Liquid Polyurethanes
– MAX Casting Machines
– Full Vacuum and Curing Ovens
• Cryogenic Deflashing
• Rapid Prototyping – 3D Printing
• Tooling Design and Modification
Engineered Polymers Division
Custom Plastic
Fabrication &
CNC Machining
Engineered Polymers Division
Processing Capabilities
• Custom fabrication of parts from the
highest quality industrial plastics:
− Acetals: Delrin® - Celcon®
− Nylons
− PTFE: Teflon®
− UHMW-PE: Duro Glide®
• Design engineers working with the
latest CAD/CAM programs
• Full Machining Capabilities:
− CNC Routers
− Mills
− Lathes
Engineered Polymers Division
Markets Served
• ATM Parts & Components
• Conveyor Systems
• Canning & Bottling
• Food Processing
• Medical
• Aerospace
• Materials Handling
• Building & Construction
• Label Machine Components
Engineered Polymers Division
Contract
Manufacturing of
Specialty Chemicals,
Reactive Hot Melt
Adhesives and
Polyaspartic
Resins
C.A.S.E. Division
Additional Processing Technologies
• Urethane Prepolymers (MDI, TDI &
Aliphatics)
• Pigmented or Filled Polyurethanes
and Polyols
• Blocked Prepolymers
• Cast Urethanes & Prepolymers
• Thermoplastic Polyurethanes (TPU’s)
• Polyurethane Composite Technologies
C.A.S.E. Division
• Low Monomer Prepolymers
• Liquid Urethane Adhesives
• Polyurethane Foams
Production Manufacturing Equipment
• Stainless steel, full vacuum &
pressure rated
• Operate under closed conditions
• Capable of charging from bulk, drum,
tote,& bags
• In-line filtration (10-800 micron),
jacketed draw off lines
• Reactor design allows for flawless
scale up
C.A.S.E. Division
Five 3,750-Gallon One 1,500-Gallon
One 750-Gallon Two 500-Gallon
One 250-Gallon
Pilot Process Capabilities
C.A.S.E. Division
5-Gal, 4-L, 2-L, 1- L lab reactors
•5-Gallon reactor
•15-Gallon reactor
•25-Gallon reactor
•250-Gallon reactor
•500-Gallon reactor
All reactors are stainless steel, full
vacuum, and pressure rated
Each lab reactor designed based on
our 3,750-Gallon reactors
Manufacturer of
Millathane®
Millable
Polyurethane and
Thanecure® TDI
Dimer & Cure
Activator
C.A.S.E. Division
Solid Polyurethanes:
Processed on standard rubber
processing equipment
Properties: Abrasion, oil and ozone
resistance, cut/tear strength
Key Applications: Hi-performance
and longevity, i.e. O-rings, gaskets,
hoses, belts, bladders, rollers, vibration
dampeners, footwear and medical
devices
Millathane®
C.A.S.E. Division
TSE is The World’s Largest Producer of Millable Polyurethane Rubber
Thanecure® T9 is a polyfunctional
isocyanate
Key Applications for T9:
•Crosslinking agent for industrial
adhesives
•Adhesion promoter for rubber-to-
fabric bonding
•Vulcanizing agent for isocyanate-
cured polyurethane rubber
Key Applications for ZM:
•Cure activator for sulfur-cured
Millathane polyurethane rubber
Thanecure® T9 • Thanecure® ZM
C.A.S.E. Division
TSE-EcoSpray®
and TSE-EcoWind®
Environmentally
Preferable, VOC-
Free Composite
Resins
C.A.S.E. Division
TSE-EcoWind®
•VOC-free with super-fast cure time and
ultra low emissions
•Outperforms epoxies and styrene- based
esters
Key Applications:
•Fiber Reinforced Polymer (FRP)
•Filament wound water heater tanks, water
softener pressure vessels, pipes, storage
tanks
VOC-Free Polyurethane
Composite Resins TSE-EcoSpray®
•VOC-free with super-fast cure time
•Replacement for styrene ester & vinyl ester resins
Key Applications:
•Thermoformed products for bath, kitchen and hot tub spas
C.A.S.E. Division
Research &
Development
Labs
Two Locations:
•DAC 1 –
113th Avenue
•DAC 2 –
112th Avenue
Development & Analytical Center (DAC)
DAC Laboratory #1
Development & Analytical Center (DAC)
Technical personnel include:
• 2 Chemists (1 PhD)
• 3 Chemical Engineers
• 4 Laboratory Technicians
Provides QC, Analytical, and R&D Services
• Particle Size Analyzer
• Melt-Flow Indexer
• Electrothermal Melting Point
Apparatus
• Carl-Fisher moisture
analyzers
• SPC & SQC for all products
• In-process and final product
testing
Instrumentation includes:
• Gas Chromatograph FTIR
Spectrometer
• DSC
• 8 Brookfield Viscometers
with computer interface
• Mettler-Toledo Automatic
Titrators with computer
interface
• Mettler Halogen Moisture
Analyzers
DAC Laboratory #2
Development & Analytical Center (DAC)
• Abrasion Testing
• Coefficient of Friction Testing
• Compression Set Testing
• Tensile and Tear Testing
• Rheological Property Testing
• Electrical Properties Rubber,
Plastics
• UV Resistance
• Impact Testing – Plastics
Rubber and Plastic Testing Capabilities
TSE Team Integration
TSE has a highly diversified, yet
synergistic, team of Professionals,
Scientists, Engineers, and
Manufacturing Personnel.
This dedicated group of employees
come together as One Team
allowing TSE to provide the highest
level of Quality, Service, and
Innovation.
Management
Financials
Logistics
Laboratory Science
Process Engineering
Design Engineering
Manufacturing
Quality Assurance
TSE has expertise from the start of the supply chain
all the way through to the end user
• Scientists, Engineers & Process
Experts at all levels
• We develop & manufacture a wide
range of polyurethane chemistries and
systems
• All rubber types, including Nitrile,
Neoprene, Silicone, EPDM, Natural
Rubber & more
• All performance plastic types including
UHMW, Acetyl, Nylon & more
TSE Resources
The UHMW-PE
Sheet Division of
TSE Industries
TSE-OK, LLC
Duro-Glide® UHMW-PE Sheets
• Proudly Made In America
• Compression molded UHMW-PE
• 4’ x 10’ standard sheet
• Larger on Request: 80’ x 160”, 80”
x 240”
• Thicknesses ¼” up to 4”
• Colored Virgin Sheets
• Enhanced UHMW-PE with special
additives for high performance
• Special high speed mixer for
custom blends and colors
TSE-OK, LLC
Markets Served
• Lining Industry – Truck, Ship, Rail Vehicles
• Paper and Logging Industries – Conveyor Systems
• Mining and Agro, Power Industries – Silos, Bunkers
• Marine Industry – Fender Systems, Docks, Hulls
• Custom Fabrication Shops
• Leisure / Sports Industry – Ski Ramps, Ice Rinks
• Food & Beverage Industry – Cutting Boards, Conveyors, Poultry
• Packaging Industry
TSE-OK, LLC
FDA Registered
Contract
Manufacturer for
the Bio-Pharm &
Medical Device
Industries
WHK BioSystems, LLC
WHK BioSystems
Quality
WHK BioSystems, LLC
• Registered with the FDA as a Medical
Device Manufacturer, September 2013
• ISO 13485: 2003 Certified
• ISO Class 7 (Class 10,000) Clean
Room – 2,400SF
• Microbial Validation
−Microbial Enumeration & Top 5
Microorganism Identification
• Manufacturing Environment
• Critical Work Surfaces
WHK BioSystems, LLC
Facility:
• 2,400SF Clean Room, (ISO
Class 7)
• 3,200SF Offices
• 6,000SF Warehouse
(Controlled Environment)
Services
• Product Design & Assembly
• Single Use Components &
Assemblies
• Laser Cutting & Engraving
• Leak Detection, Testing &
Sterilization
• RF Welding
• Vacuum Bag Sealing
• Inventory Management
• LiteSure™ Inspection Light
Tables & Pads
TSE INDUSTRIES, INC.
www.tse-industries.com
Thank You!