8/4/2019 TRX Config Mismatch

1/5

1 PHOEUNG SARIM

TRX Config Mismatch alarm

View alarm on BSC:

1- Click on Alarm Maintenance => Browser Alarm and then you will see this window beloved:

2- And right on alarm fill choose Filter Alarm and Then type ID of alarm into Textbox and choose sitename in fill and OK.

Next you will see alarm TRX Config Mismatch Alarm in fill:

8/4/2019 TRX Config Mismatch

2/5

2 PHOEUNG SARIM

How to fix alarm:

Click on site name and than click on card of cell by right click on card DRFU/GRFU => View SiteBoard

=> Configure Site Board Attributes => View on Sent Receive Mode => Single Feeder (1TX + 2RX)

Not: If you see this mode you must be change it to Double Feeder (2TX + 2RX) if site configured2TRX.

If it Single Feeder (1TX + 2RX).

Please change to Double

Feeder (2TX + 2RX)

8/4/2019 TRX Config Mismatch

3/5

3 PHOEUNG SARIM

Solution:Right click on site at left panel => Configure Site Board Attribute

Click on button Configure Site Board Attribute

8/4/2019 TRX Config Mismatch

4/5

4 PHOEUNG SARIM

Right click on board => Configure Site Board Attribute = Sent Receive Mode (Double Feeder (2TX + 2RX))

=> OK => OK => Finish.

8/4/2019 TRX Config Mismatch

5/5