Trumpf Training Part 1
-
Upload
christer-lindholm -
Category
Documents
-
view
921 -
download
9
description
Transcript of Trumpf Training Part 1
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
TRUMPF TRAINING, PART 1: SYSTEM & PRODUCT BASICS
MATE PRODUCT TRAINING
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
TRUMPF TOOLING:GENERAL PRODUCT OVERVIEW
MATE PRODUCT TRAINING
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
3
Features and Benefits:Trumpf Standard Style
• Fully compatible with other systems• Premium tool steel punches
– M4 steel on size 0– M2 steel on size 1 & 2
• Urethane strippers available• Steel strippers with chamfer in opening• Dies
– Double-cut dies with 1,5mm grind life (Competitors only 1mm)
– D-2 tool steel– Constant clearance dies– EasyView O-rings available
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
4
Trumpf Standard Tool Alignment
• Trumpf Standard Style tooling requires a special fixture to align punches with alignment ring to set angle setting.
• Known as Quickset or Multiset
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
5
When to offer Standard Trumpf
• Customer’s priorities are:– Compatibility– Price
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
6
Features and Benefits Mate QuickLock™
• Punches– Alignment without fixture– M2 tool steel– Available in 77.5mm length– Pin allows to reproduce exact shear when regrinding
• Only 1 alignment ring• Urethane strippers
– Slitting tool with bolt-on urethane strippers– Urethane bolt retainers prevent urethane breakage
• Dies– Double-cut dies with 0.59”(1,5mm) grind life– D-2 tool steel– Constant clearance dies – EasyView™ O-rings available
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
7
When to offer QuickLock
• Customer’s priority– Less set-up time– Less tool inventory (only 1 alignment ring)
• When customer does not have alignment fixture– Special shapes – hard to adjust the angle– Used Trumpf machine– Euromac – must confirm alignment ring (manual or
automatic)– Boschert (newer models only with automatic tool
change alignment rings)
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
8
Features and Benefits:Mate NEXT™
• Fully compatible with Trumpf MultiUse and Wilson 2-4-1• Punches
– Alignment without fixture – M4 steel for punches up to 30mm diam/diag– 0.118(3mm) more grind life (with shim)
• Holders– Size 40 has collar for urethane stripper– Captive draw bolt remains in holder & pushes punch out when
unlocking– Fixed insert setting reproduces exact shear on punch when
regrinding
• Dies– Double-cut dies with 1,5mm grind life– D-2 tool steel– Constant clearance dies– EasyView™ O-rings available
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
9
When to offer NEXT
• Customer priorities– Less set-up time– Longer tool life– Increased production time
• Customers running same parts, many high hit tools
• Jobs with harder materials, such as stainless steel M4 steel on punches up to 30mm
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
10
Heavy Duty Tooling for Trumpf
Alignment Ring
Reinforced Heavy Duty Punch
Stripper
Die Adapter
Heavy Duty S-7 Hat Die
Die Base
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
11
When To Recommend Heavy Duty Trumpf Tooling?
• Mild Steel/Aluminum over 4.1mm thick
• Stainless Steel over 1.6mm thick
• Important when over 16 tons!!
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
12
Extended Length Punches
• 77mm OAL & 77,5mm(over all length)
• Machines: TC2000, TC5000, TC6000 and newer
• 0.118(3.00mm) extra grind life
• No additional charge
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
13
Urethane Strippers
• Always in contact with the sheet
• Quiet and does not mark
• Punching close to forms
• Can be used on different punches (when opening too big, may be problem in thin material)
• NOT recommended for nibbling
• Best uses for urethane in Trumpf:– Special shape where the metal stripper is much more expensive and
the tool will take relatively few hits over time
– Tool that must punch after forming operations occur• Allows such tools to "punch from form height" with no risk of collision
between the metal stripper and the forms on the sheet
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
14
Urethane Strippers: Push-on vs. Molded
• Push-on– Good for most
applications
– Thin material
– Faster lead time
– Short life in thicker material
• Molded– Thin material
– Small dimensions
– Special shapes
– Longer lead time
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
15
Steel Strippers
• Resistant to deformation and breakage
• Long tool life• Can be set to either be engaged or
disengaged, contact with the sheet• Mate Advantage:
– Chamfer in opening– Combined with Next punches with
shim, punch can be sharpened 1.7mm more than competitor tools
– Maximum grind life of 9mm– Best Uses:
• Thick material – last longer than urethane
• NEXT punches when shim is used
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
16
Features and Benefits: LongLife™ Slitting Inserts
• Fully compatible with other systems
• Best use up to 2.0mm SS, 3.0mm MS/AL
• Upper inserts in M4 steel– 0.118”(3,0mm) grind life– Available in flat and rooftop shear
• Lower inserts – M4 steel– 0.39”(1.0mm) grind life (with shims)– Limited die clearances– Slug Free not an option
• May be used with solid dies– Free clearance choice– 0.59”(1,5mm) grind life– Similar price as die blades (with fixed clearances and less grind
life)
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
17
Longlife Expansion
• Available in variable sizes, not fixed– Size 56 0.787(19,98mm) to 2.205(56,00mm)– Size 76 2.206(56,01) to 3.000(76,20mm)
• Increased Width up to 0.25” (6.35mm)
• One or two piece die inserts– 11 standard discrete die clearances – .002(0,05mm) increments from .004(0,10) to 0.24(0,60)
• Four standard shapes– Rectangle– Oval– Trapezoid– Dovetail
NEW!
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
18
Eurostyle™ Slitting Tool
• Solid guided stripper for on-die stripping
• Replaceable punch inserts– M2 tool steel– .060(1,5mm) max grind life
• Replaceable die inserts– A2 tool steel– Cannot be sharpened– Flip inserts for use on both sides
• 0º and 90º alignment flats for easy set-up
Size 2
.200 x 2.000 (5.0 x 56.0) Rectangle .197 x 3.00 (5.0 x 76.2) Oval
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
19
Eurostyle™ Slitting Tool
• Recommended for maximum material thicknesses:
– 2.5mm Mild Steel/Aluminum– 2.0 Stainless Steel
• NOT recommended for TC500 and newer models
– problem with sheet repositioning
Size 2
.200 x 2.000 (5.0 x 56.0) Rectangle .197 x 3.00 (5.0 x 76.2) Oval
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
20
Trumpf Fully Guided Assembly
• Two designs available– For rounds up to 6mm
– For shapes up to 20mm
• When to recommend fully guided– Small diameters or dimensions in thicker material
– Delicate material
– Thin material
– Closely spaced holes
– Customer using combo punch/laser machine – good for creating start hole for the laser work
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
21
Trumpf Fully Guided Assembly: Rounds Up To 6mm
Fully guided assembly with 5 guided surfaces for punching thick material with small punch diameter/diagonal
• Prevents Punch Breakage• Better Punching Accuracy• Better Stripping• Longer Tool Life• Flatter Piece Parts
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
22
Trumpf Fully Guided Assembly: Shapes Up to 20mm
• Punch insert M2 tool steel• Recommended for max.
0.118(3.0mm material thickness)• Use with machine stripper opening >=
2.800 (71.12mm) diameter
© 2010 Mate Precision Tooling. All rights reserved.PPT00030_Trumpf_Training_Pt1_Basics_RevA/07/26/2010
THANK YOU!
MATE PRODUCT TOOLING