trUck - Motul
Transcript of trUck - Motul
trUckAnd cOnStrUctiOn EqUiPmEnt
rAngE
August 2014
www.facebook.com/motul
www.youtube.com/motul www.motul.com
Tekma Mega 15W40 For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)Specifications: refert to chart
Tekma Supra 15W40 For low emission naturally aspirated or turbocharged Diesel engines (Euro II, Euro III).
Standards: API CG-4, ACEA E2Specifications: refert to chart
100% SYNTHETIC TECHNoSYNTHESE ®
MINEral
DIESEl ENGINE lUBrICaNTS
Fuel Economy Tekma Optima 5W30Suitable for the latest generation of low emission turbocharged Diesel engines (Euro II, Euro III, Euro IV), fitted with EGR and SCR. Specially recommended for recent fleets with high technology engines and with Long Drain Intervals. Fuel Economy.
Standards: ACEA E4 / E7 (E5 / E3)Specifications: refert to chart
Tekma Mega X 10W40«Super High Performance Diesel»For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing both outstanding resistance at high temperature, easier flowing at cold temperature and longer lubricant life. Improves wear protection at cranking and fuel economy at frequent start ups.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)Specifications: refert to chart
Tekma Mega X 15W40 «Super High Performance Diesel»Reinforced lubricant intended for use in engines running in warm climates and severe conditions. For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing outstanding resistance at high temperatures and longer lubricant life time.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3) Specifications: refert to chart
Tekma Mega X LD 15W40 «Super High Performance Diesel»Reinforced lubricant (TBN 15) intended for use in engines running with high sulfur content fuels (up to 1,5%) in warm climates and severe conditions. For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock providing outstanding resistance at high temperatures and longer lubricant life time.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)Specifications: refert to chart
LOW SAPS
Tekma Ultima 10W40Suitable for the latest generation of low emission turbocharged Diesel engines (Euro II, Euro III, Euro IV), fitted with EGR and SCR and high power.
Standards: API CF, ACEA E4 / E7 (E5 / E3)Specifications: refert to chart
FULL SAPSFULL SAPS
Low SAPSTekma Ultima+ 5W30Tekma Ultima+ 10W40 Low SAPS lubricants. For turbocharged or direct injection Diesel engines meeting Euro II, Euro III, Euro IV or Euro V emission regulations, fitted with EGR and/or SCR systems and with or without DPF, working in high severe conditions of load and service.
Standards for Tekma Ultima+ 5W30:API CJ-4, ACEA E4 / E6 / E7 (E5 / E3) / E9Standards for Tekma Ultima+ 10W40:API CI-4 / CH-4, ACEA E4 / E6 / E7 (E5 / E3)JASO DH-2Specifications: refert to chart
Tekma Norma + 15W40Tekma Norma + 20W50For naturally aspirated or turbocharged Diesel engines (Euro I, Euro II).
Standards for 15W40: API CF-4 / CF / CD / SFStandards for 20W50: API CF-4 / CF / CE / CD / SFSpecifications: refert to chart
Tekma Norma+ Monograde SAE 30 / 40 For naturally aspirated or turbocharged Diesel engines.
Standards: API CF-4 / CF / CE / CD / SFSpecifications: refert to chart
Tekma Norma 10W For hydraulic systems, hydrostatic transmissions and torque convertors.Zinc content above 900 ppm.
Standards: API CF / SF
Tekma Diesel 2T (SAE 40) Specially formulated for DETROIT 2 STROKE DIESEL engines which require API CF-2 or CD-2.
Standards: API CF-2 / CFSpecifications: MIL-L-2104 D
LOW SAPSTekma Futura+ 10W30 Tekma Futura+ 10W40Low SAPS lubricants. For turbocharged or direct injection Diesel engines meeting Euro II, Euro III, Euro IV or Euro V emission regulations, fitted with EGR and/or SCR systems and with or without DPF, working in high severe conditions of load and service.
Standards: API CJ-4, ACEA E9 / E7 (E5 / E3)Specifications: refert to chart
Tekma Mega X LA 10W40 Low SAPS lubricant. For turbo Diesel engines with DPF. Designed for last generation of engines. Euro II, Euro III, Euro IV or Euro V emission regulations compliant, fitted with EGR and/or SCR Systems with or without DPF
Standards: API CI-4, ACEA E6 / E7 (E5 / E3)Specifications: refert to chart
TRH 97 Specially formulated for farming machines transmissions, gearboxes, rear axle, hydraulic liter systems and wet brakes.
Standards / Approvals: JOHN DEERE J20C J20D, NEW HOLLAND FNHA-2-C-201.00, JI CASE MS 1210 / MS 1209 / MS 1207 / MS 1206 / MS 1205 / MS 1204 / IH B6, FORD M2C 86 B/C / M2C 134 D / M2C41-B / M2C48-B / M2C53-A, MASSEY FERGUSON MF 1110 / MF 1127 / MF 1129 A / MF 1135 / MF 1141 / MF 1143, ALLISON C4, CATERPILLAR TO-2 ,WHITE FARM Q-1826 / Q-1802 / Q-1766 / Q-1705
TRH 100 Specially formulated for farming machines transmissions, gearboxes, rear axle, hydraulic liter systems and wet brakes which are working in extreme conditions.
Standards / Approvals: FORD M2C 86 A, MASSEY FERGUSON MF 1135
TRANSMISSIONS WITH WET BRAKES
MTO-4 10W - 30 & 50Specially designed to meet CATERPILLAR TO-4 specification. Transmission lubricant CATERPILLAR : CAT TO-4 & TDTO.API GL-1 / GL-2 /GL-3
90 PA Specially formulated for limited-slip differentials. Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
TraNSMISSIoN lUBrICaNTS
Gear Synt TDL 75W90Specially designed for mechanical transmissions and long drain service. Standards / Approvals: API GL-5 / MT-1, MIL-L-2105E, MAN M3343 Typ S (3343 SL), MB 235.8, ZF TE-ML 02B / 05B / 07A / 08A / 12B / 16F / 17B / 19C / 21B, SCANIA ST0 1:0 (Transmission)
Motylgear 80W140 For all mechanical transmissions, synchronised or non synchronised gearboxes, gearboxes/differential, transfer gearboxes and hypoid differentials without limited slip system operating under very heavy loads. Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
MECHANICAL / SEMI-AUTOMATIC TRANSMISSIONS
Dexron III For all systems where DEXRON or MERCON standard is required.
Standards / Approvals: MAN 339 Typ Z-1 & V-1 (339F), ALLISON C4, MB-Approval 236.5 / 236.9, VOITH 55.6335.32 (G607), ZF TE-ML 03D / 04D / 14A / 17C, CATERPILLAR TO-2GENERAL MOTOR DEXRON III G, FORD MERCON
AUTOMATIC TRANSMISSIONS / CONVERTERS
Transmission Fluid A For all systems where GENERAL MOTORS ATF type A standard is required.
Standards / Approvals: GENERAL MOTORS ATF Type A, ALLISON C4
Motylgear LD 75W80Specially recommended for heavy loaded gearboxes and long drain service.Standards / Approvals: API GL-4, MAN 341 TL, ZF TE-ML 02D, VOLVO 97305 / 97307,EATON (Extended drain), RENAULT VI
Multi ATF Technosynthese® lubricant high performance.
Standards / Approvals: GENERAL MOTOR DEXRON III G / III H / II D / II E, FORD MERCON / MERCON V & SP, JASO 1A, ATF +3 / +4, DIAMOND ATF J2 / SP II / SP III / PSF 3, VOITH G607, ZF TE-ML 03D / 04D / 09 / 14A / 14B / 16L / 17C, RED-1, JWS 3309
Dexron IID For all systems where DEXRON II standard is required.
Standards / Approvals: MAN 339 Typ Z-1 et 339 Typ V-1 (339D), MB-Approval 236.7, VOITH 55.6335.32 (G607), ZF TE-ML 03D / 04D / 11A / 14A / 17C, GENERAL MOTOR DEXRON II D, ALLISON C4, CATERPILLAR TO-2
Gear MB 80W Specially designed for truck gearboxes: Mercedes Benz, MAN or ZF (Ecolite, Ecomid, Ecosplit, Astronic 1&2 without Intrader).
Standards / Approvals: API GL-4, MB-Approval 235.1, MAN 341 Typ Z1 et Typ E1 (341N), ZF TE-ML 02A / 17A
Trans MB 85W90 For gearboxes, differentials and reduction gear.
Standards / Approvals: API GL-5, MB-Approval 235.0, MAN 342 Typ M-1, ZF TE-ML 16A/16B/16C / 17A/17B/ 19A/19B /21A
HD 80W90 For all mechanical transmissions, synchronised or non synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under very heavy loads.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
HD 85W140 For all mechanical transmissions, reduction gears and hypoid differentials without limited slip system operating under very heavy loads.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D, VOLVO 97310, ZF TE-ML 05A / 07A / 08A / 12A / 16C / 16D / 17B
EPL 90 All gearboxes, gearbox/differential and hypoid differentials without limited slip system operating under moderate loads and revolution speed.
Standards / Approvals: API GL-4, MIL-L 2105, MAN 341 Typ N, ZF TE-ML 16A / 17A
100% SYNTHETIC
TECHNoSYNTHESE ®
MINEral
Grease Sellette
Rubric Bio 46
Biodegradable hydraulic oil, fully synthetic, with antioxidation, anti-wear and anti-corrosion properties used under severe conditions. ISO VG 46. Biodegradability over 90% according to CEC L33 A93 and 89% on ISO 9439.
Standards / Approvals: European Eco-label DE/027/027, Blue Angel N°18724, Bosch Rexroth RE 90221-01
Rubric Bio 46 S
100% synthetic and biodegradable hydraulic oil, based on high performance saturated Ester. Speciallly designed for hydraulic systems working under severe conditions.
Standards / Approvals: ISO 15380 HEESEuropean Eco-label UK/27/006,Bosch Rexroth RE 90221-01
Tech Grease 300Very high performance multipurpose grease. Technosynthese® formulation based on com-plex lithium soap, with extreme-pressure, anti-wear, anti-oxidation and anti-corrosion additi-vation. Consistency NLGI 2
MULTIPURPOSEGREASES
TP Agri Lithium soap-based grease specially designed for public works and agricultural applications. Highly adhesive multi-purpose product for greasing of parts used in heavy duty conditions and/or working in wet environment. Extreme pressure additive. Consistency NLGI 2
MolybdenMultipurpose lithium soap- and molybdenum-based grease for intensive use in construction applications.Extreme pressure additive MoS2. Consistency NLGI 2
Roulement PLThick lithium soap-based grease specially recommended for greasing of truck wheel bearing. Consistency NLGI 3
Soft grease 0Soft lithium soap-based grease for gearbox casings.Extreme pressure additive. Consistency NLGI 0
Lithium soap-based grease specially formulated to lubricate semi-trailer fifth wheels. Enhanced antiseizing properties (graphite). Consistency NLGI 2
SEVERE CONDITIONS
WHEEL BEARINGS
CENTRAL LUBRICATION
SELLETTE
Vis 32 / 46Rotary air compressor lubricant, wear protection, anti-foam. ISO VG 32 / 46
Alterna 100 / 150Reciprocating air compressor or vacuum pumps lubricant, wear protection, antifoam. ISO VG 100 / 150
DS Universal Multigrade 10W30 / 20W40Specially formulated for non turbocharged Gasoline and Diesel engines. Transmissions without wet brakes and hydraulic lifter systems.
Standards / Approvals: API CC / SE / GL-4Performances: Refer to summary chart
COMPRESSOR LUBRICANTS
TP Super Synt 10W40 Multipurpose lubricant reinforced with a synthetic base stock Technosynthese®.Meets the latest requirements of construction equipment manufacturers.Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical transmissions, hydraulic systems, wet brakes, clutches and compressors.
Standards / Approvals: API CF-4 / CH-4 / SF, ACEA E5Performances: Refer to summary chart
Multisynthese Universal 15W40Multipurpose lubricant reinforced with a synthetic base stock Technosynthese®.Meets the latest requirements of construction equipment manufacturers.Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical transmissions, hydraulic systems, wet brakes, clutches and compressors.
Performances: Refer to summary chart
MULTIFUNCTIONAL LUBRICANTS MULTIFUNCTIONAL LUBRICANTS
Top Grease 200 Multipurpose grease lithium soap-based with reinforced anti-wear additivation.For the greasing of parts that are subjected to loads. Very good adhesive properties. Extreme pressure additive. Consistency NLGI 2
Multigrease 150 Multipurpose lithium soap-based grease for the greasing of all parts. Extreme pressure additive. Consistency NLGI 2
Grease 100 Multipurpose lithium soap-based grease for greasing under normal duty conditions. Consistency NLGI 2
Rubric HV 22 / 32 / 68 For hydraulic systems working under severe conditions.Standards / Approvals: NFE 48 603 HV, ISO 11158 catégorie HV, ISO 6743-4 catégorie HV, DIN 51524 HVLP
Rubric HV 46 Ambient Anti-wear hydraulic oil. Very high viscosity index. ISO VG 46.Standards / Approvals: NFE 48 602 HV / NFE 48 603 HV, DIN 51524 HVLP, DENISON HF-0, CINCINNATI MILACRON P 70, CASE POCLAIN P 110 32-03J, VICKERS V 104 C / 35 VQ 25, ISO III58 Catégorie HV
Rubric HM 32 / 46 / 68 / 100All types of hydraulic systems. 4 viscosity grades: ISO VG 32 / VG 46 / VG 68 / VG 100Standards / Approvals: NFE 48 603HM, DIN 51 524 HLP, DENISON HF-0, CINCINNATI MILACRON P 70, VICKERS V 104 C / 35 VQ 25
HYDRAULIC LUBRICANTS
GC grease 00Fluid lithium soap-based grease specially formulatedfor central lubrication. Extreme pressure additive. Consistency NLGI 00 / 000
➜ The colours references are correspon-ding to the products’ colours
WATER RESISTANCE AND ADHESIVENESS
The lubricant recommendations for each vehicule are available on the website www.motul.com
DIESEL ENGINE LUBRICANTS
TO2 Allison C4 06B / 06C / 07BM2C 159 B
30 / 40MF 1139 & 1144 227.1 JDM 27
TO2 Allison C4 06B / 06C / 07BM2C 159 B
30 / 40MF 1139 & 1144 227.1 JDM 27
MIL-L-2104 B & 2105
DS Universal Multigrade10W30 / 20W40
TP Super Synt10W40
Multisynthese Universal 15W40
CAT MIL-L GM ZF-TE-ML NEW HOLLAND FORD
MASSEY FERGUSON
MB JOHN DEERE
MANUFACTURERS’ PERFORMANCES
MANUFACTURERS’ APPROVALS & SPECIFICATIONS
DAF
CES 20071-72-76-77
HP-1HP-2
DQC-IV18-1804
FEEO-M PLUS M3277
MB-Approval 228.5
Type III RXD VDS-3
CES 20072 DQC-III EO-N M3277 MB-Approval
228.5Type III RLD-2 LDF-3 VDS-3
ECF-3 CES 20081 DQC-IV LAEO-O
PREMIUM PLUS
M3477M3271-1 M3575
MB-Approval 228.51
Type 3.1 RLD-3 VDS-4
ECF-1aLong Drain
DQC-IV LA EO-NM3477
M3271-1MB-Approval
228.51 & 235.27Type 3.1 RLD-2 Low Ash VDS-3
ECF-1 EO-N M3275MB-Approval
228.3Type II RLD-2 LDF-2 VDS-3
ECF-1CES 20071-72-76-77-78
EO-M PLUSEO-N
M3275MB-Approval
228.3Type II RLD-2 VDS-3
ECF-1CES 20071-72-76-77-78
EO-M PLUS M3275 MB-228.3 Type II
RDRD-2RLD
RLD-2
VDS-3
CES 20076-77
Long Drain
DQC-III LA EO-NM3477
M3471-1MB-Approval
228.51Type 3.1
RLD-2RXDRGD
VDS-3
ECF-2ECF-3ECF-1a
CES 20081 DQC-III-10EO-O
PREMIUM PLUSM3575 MB-228.31 RLD-3 VDS-4
CES 20081 DQC-III LAEO-M PLUS
EO-OPREMIUM PLUS
M3575 MB-228.31 RLD-3 VDS-4
ECF-1CES 20071-72-76-77-78
EO-N M3275MB-Approval
228.3Type II RLD-2 VDS-3
EO-L M271MB-Approval
228.3Type I E2R VDS
MB-Approval 228.1
MB-Approval228.0
MULTIFUNCTIONAL LUBRICANTS
Tekma Ultima 10W40
Tekma Ultima +5W30
Tekma Ultima +10W40
Tekma Mega X10W40
Tekma Mega X LD 15W40
Tekma Futura +10W40
Tekma Supra15W40
Tekma Norma+15W40 & 20W50
Tekma Norma+Monograde30 / 40
Tekma Optima5W30
CAT DEUTZCUMMINS IVECO MACK MB-Approval
MTU VOLVOSCANIA
Tekma Mega X 15W40
Tekma Futura +10W30
Tekma Mega15W40
RVIMAN
Tekma Mega X LA 10W40
DOT 5.1 Brake Fluid Long-life 100% synthetic fluid for all types of hydraulic brakes and clutches.Dry boiling point: 272 °C (522 °F)Wet boiling point: 185 °C (365 °F)
Standards: FMVSS 116 DOT 3, DOT 4, DOT 5.1, SAE J 1703, SAE J 1704, ISO 4925 (5.1, 3&4)
DOT 3 & 4 Brake Fluid
100% synthetic fluid for all types of hydraulic brakes and clutches.Dry boiling point: 245 °C (473°F)Wet boiling point: 158 °C (316 °F)
Standards: FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704, ISO 4925 (3&4)
MOTUL 119 Bd Félix Faure - 93300 Aubervilliers FRANCE Tel +33 (0) 1 48 11 70 00 - Fax. +33 (0) 1 48 33 28 79Contact : [email protected]
mb2
pro
ject
- 2
0257
1- ©
Sté
phan
e A
DA
M -
Aug
ust
2014
MAINTENANCEBRAKE FLUIDS
COOLANTS
Inugel Optimal Ready to use Long-life organic technology.High protection down to -37°C / -35°F.
Performances: BS 6580, MAN 324 Typ SNF, Renault Trucks 41.01-001 / --Type D, DAF 74002
Inugel Optimal Ultra Concentrated formula Long-life organic technology.High protection down to -54°C / -65°F.Dilution from 33% to 60%.
Performances: BS 6580, MAN 324 Typ SNF, Renault Trucks 41.01-001 / --Type D, DAF 74002
Inugel Expert Ready to use. Hybrid technology.Anti-corrosion and anti-freeze.This product can be mixed with almost all monoethyleneglycol based coolants. Protection down to -37°C / -35 °F.
Performances: BS 6580, AFNOR NFR 15-601, JASO M325, SAE J1034, MAN 324 Typ NF, Volvo Trucks 128 6083/002, IVECO 18-1830
Inugel Expert Ultra
Concentrated formula.Hybrid technology. Anti-corrosion and anti-freeze.This product can be mixed with almost all monoethyleneglycol based coolants.Protection down to -54°C / -65°F.Dilution from 33% to 60%.
Performances: BS 6580, AFNOR NFR 15-601, JASO M325, SAE J1034, MAN 324 Typ NF, Volvo Trucks 128 6083/002, IVECO 18-1830
Inugel ClassicReady to use Anti-corrosion and anti-freeze.Protection down to -25°C / -13°F.
Diesel System CleanSuperior engine output.Cleaner specially designed for the fuel systems of Diesel engines. Reinforced action on valves, carburettors, injectors and combustion chambers. 300ml
E.Z. Lube Multi Protect
Multi protection Multi-use lubricant and anti-corrosion fluid.Creates a reinforced anti-corrosion protective film.
Vision Expert Ultra Concentrated windshield washerAdapt dilution to required protection. Exclusive formula degreases and removes dirt from the windshield.
Vision Classic -20°C
Ready to use windshield washer. Degreases and removes dirt from the windshield. Dries without leaving any mark. Freezing protection for washer system and tank protection (-20°C / -4°F).
CLEAN AND SHINE
Engine System CleanAdd to the oil before drain.Cleans and protects the engine. Decreases oil and fuel consumption. Improves compression. 300ml