Triumph Tiger Explorer special parts - Touratech Tiger... · Triumph Tiger Explorer 810 811...

34
www.touratech.de/tigerexplorer Triumph Tiger Explorer SPECIAL PARTS 1 2 3 4 5 6 Tail rack bags from page 834 Pannier systems from page 840 Seats from page 820 Handlebar|Cockpit|Windscreens|Lighting from page 810 Tank bags from page 832 Engine guard|Cylinder protection|Fairing from page 822

Transcript of Triumph Tiger Explorer special parts - Touratech Tiger... · Triumph Tiger Explorer 810 811...

www.touratech.de/tigerexplorer

Triumph Tiger Explorer

special parts

1

2

3

4

5

6

Tail rack bags from page 834

Pannier systems from page 840

Seats from page 820

Handlebar|Cockpit|Windscreens|Lighting from page 810

Tank bags from page 832

Engine guard|Cylinder protection|Fairing from page 822

www.touratech.de/tigerexplorer

1

2

3

45

6

special parts

811810

Triumph Tiger Explorer811810

Handlebar CrossbarTriumph Tiger Explorer

With our handlebar crossbar fitted to your Tiger, you can now also place a roadbook holder, motorcycle computer or navigation systems in your direct field of vision. A very useful part made from aluminium. 040-0604

Handlebar Riser 20 mm Tiger Explorer Original Handlebar

On long off-road stretches, the seating position on the Tiger can be a bit tiring. This is where you need Touratech’s 20 mm handlebar riser for the original handlebar on the Triumph Tiger. It makes for a much more relaxed ride, both in a sitting position and when you’re standing up over difficult terrain.You’ll feel the difference in your shoulders and wrists, and you won’t have to worry about getting tired even on long journeys.

420-5255

GPS Mounting Adapter for Handlebar Clamp, Triumph Tiger Explorer

Touratech’s GPS mounting adapter for the handlebar clamp on the Triumph Tiger simply attaches onto the Triumph’s handlebar mounting clamps.Nearly all our GPS brackets fit perfectly on its 12 mm strut. For easy, safe attachment of your GPS. Does not block your view of the instruments.

420-5410

813812

Triumph Tiger Explorer813812

Touratech Hand Protectors GDTriumph Tiger Explorer

Enclosed virtually indestructible hand guards with special fitting set for the Tiger Explorer. Reliably protects riders’ hands and levers from damage.Note: at Tiger Explorer only in conjunction with handlebar riser (420-5255).

420-5650 (black)420-5651 (yellow)420-5652 (blue)420-5653 (red)420-5654 (white)

You will find matching spoilers for these hand protectors on page 184.

Aluminium Handlebar EndsTriumph Tiger Explorer

Our handlebar ends are milled from a single piece of aluminium an with colour anodised caps. A small part with a big visual impact at both ends of the handlebar.

- Made from anodised aluminium.

420-5245 anodised gold420-5246 anodised red420-5247 anodised black420-5248 anodised titan colour

815814

GPS Mounting Adapter above Instruments Triumph Tiger Explorer

Our „mounting adapter above instruments“ lets you keep your GPS device or road book firmly in view. No more looking down or distractions to the side - your eyes are always pointed at the road.The mounting plate attaches neatly to the existing mounting points behind the windscreen on the Tiger. No drilling or laborious modifications required! Nearly all Touratech GPS mounts can be easily fitted to the mounting adapter‘s 12 mm centre strut.

422-5415

Spoiler for Windscreen Triumph Tiger Explorer

This spoiler unit is simply clamped to your windscreen. Wind protection can be improved considerably, and the noise level can be minimised when riding at relatively high speeds. If you

should then decide to ride off road, the spoi-ler can be unmounted easily with the clamp mechanism and packed away. Thus, the disa-dvantage or risk of injury when riding off road is considerably lower than when riding with a higher windscreen. No tools are required for mounting; everything can be performed at the bat of an eye.

044-0410

Spoiler for Windscreen, Lockable Triumph Tiger Explorer

The high-quality mechanics can be secured with a lock. This makes quick unmounting or theft conside-rably more difficult.If you should then decide to ride off road, the spoiler can be unmounted easily with the clamp mechanism and packed away. Thus, the disadvantage or risk of injury when riding off road is considerably lower than when riding with a higher windscreen. No tools are required for mounting; everything can be performed at the bat of an eye.

044-0412

Triumph Tiger Explorer815814

817816

Triumph Tiger Explorer817816

Touratech Auxiliary Lights, Fog Light for Tiger Explorer

Touratech’s auxiliary fog light for the Triumph Tiger Explorer looks the same as the Xenon headlight and dramatically improves your safety in rain, fog and snow. The high-output lamp delivers a bright piercing light that also helps illuminate the sides of the road at night. Both lights carry the TÜV test mark so there’s no need to have your regist-ration documents updated (where applicable).

422-5475 Fog light left

422-5476 Fog light right

422-5477 Set (fog light left+right)

819818

Makrolon Headlight Protector with Quick Release Fastener, Tiger Explorer

Especially on gravel roads, headlights are always at risk of being damaged by stones thrown up by the vehicle in front. Touratech’s headlight protector for the Triumph Tiger Explorer is made from Makrolon. It effectively protects the fragile lens glass against stones, it’s resilient – in fact, practically indestructible and if it does somehow break it won’t shatter. The headlight protector is also virtually invisible, so it doesn’t affect the bike’s appearance. Another great feature is the quick release fastener that lets you easily clip on the headlight protector and detach it again as needed. And of course the protector comes with everything you need to fit it. 420-5090

Stainless Steel Headlight Protectorwith Quick Release Fastener (Black)

Touratech’s stainless steel headlight protector effectively prevents larger stones from damaging the headlight lens. The latticework creates a rugged off-road look and considerably modifies the bike’s appearance. As well as being a practical product made from laser-cut black stainless steel, it also matches the style of a touring enduro. Another great feature is the quick release fastener that lets you easily clip on the headlight protector and detach it again as needed. And of course the protector comes with everything you need to fit it.

420-5095

Triumph Tiger Explorer819818

821820

Comfort Seat for Triumph Tiger Explorer

Noticeable improvement all round! The standard seat on the Tiger Explorer has great potential for improvement, both for the rider and pillion passenger.Not only have we modified the shape, hardness and incline of the foam, we also use a bi-elastic, sweat-resistant, non-slip cover material with sealed seams. On the Tiger Explorer it was particu-larly important to provide thicker foam for the thinly padded pillion seat, to improve comfort on longer journeys.

422-5900 low

422-5901 standard

422-5902 high

422-5907 pillion

Comfort seat *breathable*

We also offer this popular comfort seat in our <b> patented breathable version </b> for the most discerning riders! The seat construction is based on an open-pored foam core with a spacer fabric around the seat to allow air to flow more easily through the ultra strong, elastic, waterproof textile cover.

422-5904 standard

422-5905 high

422-5910 pillion

Triumph Tiger Explorer821820

823822

Triumph Tiger Explorer823822

Side Stand Switch Protector,Tiger Explorer

The side stand switch on the Tiger Explorer is completely unprotected in a seriously vulnerable position where larger stones or ruts can cause di-rect damage. This is an extremely annoying short-coming on difficult terrain, as the switch needs to be bypassed. It’s only when the side stand switch stops working and the bike refuses to start that you realise just how important this component is! Touratech’s protector for the side stand switch on the Tiger Explorer is a resilient guard made from high-grade stainless steel that effectively prevents damage to the switch so it won’t stop you in your tracks. A little part that’s extremely functional!

422-5105

Oil Filler Cap with Special ToolTriumph Tiger Explorer

Touratech’s quality oil filler cap for the Triumph Tiger Explorer is milled from aluminium and replaces the plastic oil filler cap. The Touratech oil cap needs a special tool (supplied) to open it. You can also use the tool as a key fob and bottle opener. The tool - which comes with the cap - secures the filler cap against un-authorised access, and means the cap can be opened without fiddling or burning your fingers.

Available in gold, red, black and titanium colours.

422-5230 gold 422-5231 red 422-5232 black 422-5233 titanium

Cover for Rear Silencer MountTriumph Tiger Explorer

Touratech’s cover for the rear silencer mount is mil-led from a single piece and replaces the simple bolt that is used to attach the silencer. Available to match the Touratech oil filler cap, frame plugs or swingarm bearing cover in gold, red, black or titanium colours. A visual highlight.

420-5250 gold 420-5251 red420-5252 black 420-5253 titanium

825824

1

2

3

Mirror Extension Triumph Tiger ExplorerThe mirror extension puts the mirror in a muchbetter position. This improves the rider‘s field ofvision. This discreet component increases safetyand is almost unnoticeable.It‘s a must for anyone who wants to see more thanjust their arms in the mirrors.Parts supplied: left and right side.

040-0649

REMUS HEXACONE Muffler Slip-on for Triumph Tiger Explorer

With stainless steel core, includes connecting tube, all street legal!

Features:- Carbon outlet top and bottom cover- Jacket in stainless steel- Core in stainless steel- Asymmetric hexagonal jacket shape- Dual system with removable sound insert- Weight approx. 3,3 kg for the all-stainless steel model- Increases power and torque- Super sound- Includes connecting tube for original or Remus manifold- Street legal

1. 422-5850 - Stainless Steel2. 422-5851 - Titanium3. 422-5852 - Carbon

Triumph Tiger Explorer825824

827826

Triumph Tiger Explorer827826

Stainless Steel Fairing Crash Bar Triumph Tiger Explorer

On a long trip it can easily happen: just a minor fall or bump, and your tank and fairing are damaged. Touratech’s stainless steel fairing crash bar for the Triumph Tiger Explorer protects the plastic fairing around the radiator and frame. If the bike falls over, the crash bar will support it – so those expensive plastic parts will not get scratched or broken. In fact, the crash bar can take a serious beating. As well as being functional, the electropolished stainless steel is a real eye-catcher. It fits in with the frame design and makes the bike look like a proper touring enduro – one that’s sure to make an impression both on the road and over harsh terrain.

422-5160

829828

Radiator Guard, Trimph Tiger Explorer

The radiator on the Explorer’s 3-cylinder engine is pretty large, making it susceptible to dirt and stone impacts. As the original plastic radiator guard pro-vides only limited protection on rough gravel roads, we recommend replacing it with an aluminium radi-ator guard. Touratech’s radiator guard for the Tiger Explorer offers impeccable protection against stones, optimises airflow and is made from black anodised laser-cut aluminium that unobtrusively blends in with the bike’s overall appearance. It attaches at the existing attachment points. The radiator cover can cause the engine to overheat under extreme conditions with high outside temperatures and an extreme engine load.

422-5015 anodised black422-5016 anodised alu

Decal Set Fork Triumph Tiger Explorer

Absolutely strong, thick film protects against stones and other types of damage.Black film with white print. Very easy to apply - strong adhesive.

- For both sides

100-0507

Triumph Tiger Explorer829828

Touratech Suspension Triumph Tiger Explorer

Many Advantages to other high-end brands!

Introducing the new Touratech suspension Touratech have launched a range of topnotch shock absorbers that enable individual tuning for all kinds of uses and set standards for traction, comfort and dyna-mic safety. There is now a choice of five product lines for different requirement pro files: Level 1, Level 2, High End and Extreme. All shock absorber types are manufactured to the highest engineering and quality standards. You will certainly feel the difference in riding comfort!The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Tou-ratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by the Touratech experts in Enduro racing.

Detailed information on Touratech Suspension and the available versions can be found starting on page 1242!

Progressive Replacement Fork Springs, Front, Triumph Tiger Explorer

422-5838

Level 1 Level 2 HighEnd Extreme

Triumph Tiger Explorer 422-5860 422-5880 422-5865 422-5870

Hyperpro progressive replacement springs for Triumph Tiger Explorer

422-5839

831830

Number Plate Splash GuardTriumph Tiger Explorer

This black anodised splash guard is mounted behind the number plate bracket and extends it both down-wards and towards the rear of the bike. It therefore effectively prevents dirt and other debris from soiling or damaging your seat, clothing, or luggage. The aluminium splash guard also stabilises the number plate and prevents it working loose due to vibration.

Made of black anodised aluminium.

422-5000

Long-Distance Footpegs *Works*Triumph Tiger Explorer

These footpegs have proved to be reliable at our motorbike journeys. They offer considerably wider foot base support and also allow longer distances to be covered while standing on the footpegs. - Made of stainless steel- German TÜV Type approval

420-5315

Mudguard Riser Triumph Tiger Explorer

The original mudguard on the Triumph Tiger Explo-rer is positioned very close to the front wheel. If you use TKC 80 or other similar enduro tyres, the gap gets even smaller. Then you’ll find that even small patches of mud are a problem – the mud builds up and the front wheel could lock. Touratech’s riser for the original mudguard on the Triumph Tiger Explorer is really easy to fit. A stainless steel adapter goes between the tyre and the mudguard, increasing the clearance by 15 mm. You continue using the original mudguard without any modifications. The higher mudguard gives the bike a stylish off-road look and prevents the front wheel locking up.

422-5441

Triumph Tiger Explorer831830

833832

Side Bags for the Tank Fairing Sections on the Triumph Tiger Explorer, 1 Pair

The sides of the tank fairing sections provide enough space for securely attaching add-on bags allowing quick access to smaller items such as a reflective warning vest or first aid kit or even vehicle registration papers, cell phone and wallet. These bags are the perfect supplement to a tank bag, but they can also be used separately. Because of their complementary shape, they do not disturb the original lines of the Tiger Explorer in any way. Their design and colour match those of our tank bag (422-5801 ) and side bags (422-5813) for the luggage rack, thus providing a uniform, consistent appearance.

Details:

- Soft, slip-proof inner sides prevent scratches and ensure that the bags stay right in place - Water-repellent zippers - Low weight - Volume: 2.3 litres per side - Size (L x W x H): Approx. 34 x 13 x 8 cm - Colour: black/grey - Supplied in pairsMade from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany by KAHEDO!

422-5803

Triumph Tiger Explorer833832

Tank Bag „Touring“ for Triumph Tiger Explorer

This tank bag offers you the ideal option of storing your luggage where it‘s closer to the bike‘s centre of gravity and remains easily accessible. The bag can easily be removed and offers high-quality, practice-proven features. What‘s more, it doesn‘t interfere with turning the handlebars or with riding while standing up.

Details:

- Foam-filled base plate holds its shape - Reinforced side panels - Convenient organizer compartment in cover

with removable pocket for credit cards/coinsand loops for holding pens/pencils

- Water-repellent cable grommet for routing charging/headphone cables - Map pocket with Velcro fastener (31 x 26 cm

and Velcro closure - Mounting kit easily installed with existing screws- Quickly removed by means of front click connectors and rear strap with Velcro fastener - Does not interfere with refuelling - The volume of the bag can be increased by opening its central surrounding zipper - Handy reflective strap for holding gloves or

similar items - Water-repellent zippers

- One zippered pocket on each side - Two straps supplied with the bag allow it to be used as a rucksack - Sturdy carrying handle - Low weight - Volume: 12/21 litres - Size (L x W x H): Approx. 37 x 24 x 22/32 cm - Rain hood and waterproof inner pockets

available as optional accessories - Inner bag for photo equipment available as an optional accessory - 3M reflective patches - Colour: black/grey

Made from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessa-ry. Made in Germany by KAHEDO!

422-5801

835834

055-1218 055-1247 055-1245

Tail Bag for the Pillion Seat for Triumph Tiger Explorer

Go for a ride on your own once in a while - our rear pannier is the perfect companion and straps to the pillion seat where it is closer to the centre of gravity. The lowdown:- waterproof zips, - two-part design (base plate can stay on the seat), - secured via two zips, - elastic band on the top - e.g. for gloves, - tabs for extra straps, - carry-straps so you can use the bag as a rucksack, - and reflective trim. Dimensions (L x W x H): approx. 30 x 33 x 21 cm, Volume: approx. 20 litres

055-1218

Streetline Tail Rack Bag „Touring“ Universal

The new generation of motorbike luggage systems, in a sportive design. Light, flexibel and in the same style than the tankbag “Touring””. The Rearbag was designed together with the tankbag and builds a nice and practical unit on your motorcycle. The available space of about 21 liters is build out of strong Cordura fabric and is equipped with water repellent zippers. Big 3M reflective applications give an ad-ditional security on the bike. Dimensions (l x w x h): approx. 31 x 31 x 23 cm. Volume: approx. 21 litres.

055-1247

Streetline Tail Rack Bag „New Style“

The available space of about 21 litres is build out of strong Cordura fabric and is equipped with water-proof zippers. Big 3M reflective applications give an additional security on the bike. The mounting kit is fixed with velcro under the seat. With two strong zippers the bag is fixed safely on the bag and can be removed easily. Thanks to the handle and the unique design, the bag can be used as handluggage and looks much better than the usual motorbike travelbags. Colour: black, grey.Dimensions (l x w x h): approx. 36 x 26 x 22 cm.Volume: approx. 21 litres.Caution: Please use paint protection film if necessary.

055-1245

Triumph Tiger Explorer835834

Tail Bag for the Triumph Tiger Explorer Luggage Rack

We naturally now also have a practical tail bag with expansion for the luggage rack of the Triumph Tiger Explorer. There is space for more than just the rain gear here.Colours: black, greyDimensions (LxWxH): approx. 22 x 31 x 15/26 cmVolume: approx. 10/17LMade of Teflon-coated CORDURA, therefore water-repellent.Caution: Please use paint protection film if neces-sary.

055-1220

Streetline “New Style Flat” Rear Pannier

Extra low so there are no problems getting on the bike. The large storage capacity of approx. 11 litres (expandable to 22 litres) is tailored to the space requirements of a mini tour or the daily trip to work. The base is simply attached with Velcro under the seat. The bag can then be secured at lightning speed using the sturdy zip fastener. With its handle and elegant design, the bag is also suitable as hand luggage or a business case. Dimensions (l x w x h): approx. 30 x 33 cm x 13/25 cm / 11 / 22 LMade from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany by KAHEDO.

055-1246

Tool Bag under the Rider‘s Seat

There‘s plenty of room for additional tools, a reflec-tive jacket or first aid kit under the rider‘s seat. Together with Kahedo, we have developed a special bag for this storage area. This bag makes perfect use of the available space for the above items. Thanks to the offset handle, the bag can easily be pulled out of the compartment.Colour: blackDimensions ( l x w x h): approx. 18 x 16 x 8 cmVolume: approx. 3 litres

613-1004

837836

Side Bags for the Luggage Rack on the Triumph Tiger Explorer, 1 Pair

We now offer a perfectly fitting solution for allowing quick access to smaller items such as a reflective warning vest or first aid kit, designed exclusively for the Tiger Explorer.These side bags are securely attached to the luggage rack by means of straps with velcro tabs.Their design and colour match those of our tank bag (422-5801) and side bags (422-5803) for the tank fairing sections, thus providing a uniform, consistent appearance.

Details:- Soft, slip-proof inner sides prevent scratches and ensure that the bags stay right in place- Water-repellent zippers- Low weight- Volume: 2 litres per side- Size (L x W x H): Approx. 37 x 10 x 9 cm- 3M reflective patches- Colour: black/grey- Supplied in pairs Made from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Ger-many by KAHEDO!

422-5813

Triumph Tiger Explorer837836

839838

ZEGA Pro Topcase Rack Triumph Tiger Explorer

You don’t need any great mechanical skills to fit the Touratech luggage rack for the Zega Pro Topcase to the standard luggage rack on the Triumph Tiger Explorer. The luggage rack attaches securely to four mounting points and can withstand heavier loads than the original product.The Topcase itself is even easier to attach. With Touratech’s ingenious RapidTrap mounting system, the Topcase quickly “clicks” on or off.

Made from electropolished stainless steel.

422-5455

Stainless Steel Pannier Rack Triumph Tiger ExplorerTouratech‘s stainless steel pannier rack for the Triumph Tiger Explorer is a sturdy rack made of 18 mm stainless steel tubing. This non-rusting system matches the appearance of the Triumph Tiger‘s frame and guarantees extra high stability even off the beaten track.

It fits onto the existing attachment points. The extre-mely strong cross-brace design will withstand heavy off-road use without any trouble and is an elegant complement to the overall styling of the Triumph Tiger Explorer.

422-5555

Triumph Tiger Explorer839838

Universal Travel Bag for Pillion Seat

A unique solution for all luggage issues! Specially developed to suit almost any motorbike and designed for multi-purpose use. Because it is easy to attach and remove, our Universal Travel Bag is a flexible and ingenious alternative to fixed pannier systems, even for longer trips.

You will find more information on the Universal Travel Bag and the accessories on page 1194!

055-1461 055-1468 Black Edition

Aluminium Luggage Rack for Triumph Tiger Explorer

Touratech’s aluminium luggage rack fits perfectly on the rear of the Triumph Tiger Explorer where it looks mighty fine. Thanks to the many slots and recesses on this aluminium luggage rack, luggage of almost any shape and size can be safely attached to your bike. The wide shape means that even large items can be secured easily and without difficulty.The aluminium luggage rack is light and yet ext-remely strong. It comes with all required mounting materials, including the special spacers.

422-5450

841840

Triumph Tiger Explorer841840

99,0 cm 107,0 cm

3831 4538

ZEG

A P

ROZEGA Pro ZEGA Pro *And-S* ZEGA Pro *And-Black*

31/38 litres 422-5730 422-5731 422-5732

38/45 litres 422-5735 422-5736 422-5737

Pannier System Triumph Tiger Explorer

The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been perfor-med in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Delivery schedule of the system:1 aluminium pannier Zega Pro 31 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit1 inox pannier rack including mounting hardware

ZEG

APRO

2Pannier System with: stainless steel rack

ZEGA Pro2 - 38/45 L 422-6035

ZEGA Pro2 - AND-S 38/45 L 422-6036

ZEGA Pro2 - AND-Black 38/45 L 422-6037

Pannier System with: stainless steel rack

ZEGA Pro2 - 31/38 L 422-6030

ZEGA Pro2 - AND-S 31/38 L 422-6031

ZEGA Pro2 - AND-Black 31/38 L 422-6032

Complete information about the innovative aluminium case on page 1036 or www.touratech.com/zegapro2_en