Tripartite Meeting Beijing, China, 8-9 November 2008 Safety & SOLAS Agenda item 3.1 IMO Goal-based...
-
Upload
melissa-walker -
Category
Documents
-
view
215 -
download
2
Transcript of Tripartite Meeting Beijing, China, 8-9 November 2008 Safety & SOLAS Agenda item 3.1 IMO Goal-based...
Tripartite Meeting Beijing, China, 8-9 November 2008
Safety & SOLAS
Agenda item 3.1
IMO Goal-based Standards
Toshiro ArimaClassNK
Chairman of IACS EG/GBS
Content
• Roadmap of GBS from MSC83 to MSC86
• Outcome of GBS at MSC83
• Outcome of GBS at MSC84
• 2nd Pilot Project
– IACS contribution
• Topics
– Net Scantling
– Application of GBS for Bulk Carriers and Tankers
– Possible schedule to introduce GBS
• List of Submittals to MSC 85
– MSC85/5, MSC85/5/1 - MSC85/5/8
Goal-Based Regulatory Framework
Tier I
Tier III
Tier V
Tier IV
Tier II
Applicable Industry Standards & Codes of Practice
Prescriptive Regulations & Class Rules
Verification Process
FunctionalRequirements
Goals
IMO
GB
S
(ref. MSC78/6/2)
Roadmap of GBS from MSC83 to 86
Session Focused Areas Date
MSC83 • SOLAS Amendments and Tier III of GBS for BC & OT• SLA• Short-term Plan to MSC86 incl. WG, 2nd PP and CG
Oct ’07
- • CG developed Unified GBS Framework• 2nd PP refined Tier III of GBS for BC & OT
MSC84 • Unified GBS Framework May ’08
- • 2nd PP continued to refine Tier III of GBS for BC & OT• CG to finalize Generic Guidelines for developing GBS
MSC85 • Approval of Tier I, II and III of GBS for BC & OT (Approval of amendment to SOLAS II-1 regarding GBS
BC & OT , related Guidelines etc. )
Dec ’08
- • CG finalize Generic Guidelines for developing GBS
MSC86 • Adoption of SOLAS Amendments and related Guidelines for GBS for BC & OT
• Finalization of the Generic Guidelines
June ’09
Outcome of GBS at MSC83
• Tier I, Goal • SOALS Amendment, Ch. II-1, Reg. 3-[10]
• Not finalized (To be approved at MSC85)
• Tier II, Functional Requirements
• GBS for BC&T*1 [Resolution MSC…]:
• Revised (To be refined at MSC85)
• Tier III, Verification
• Guidelines*2 • Reviewed and Agreed to task 2nd PP to update the draft Guidelines
*1: International goal-based new ship construction standard for bulk carriers and oil tankers (GBS)
*2: Guidelines for Verification of Compliance with GBS for bulk carriers and oil tankers (Part A: Verification Process, Part B: Inf. And Doc. Req. and Evaluation Criteria(, where III.10.2.1 refers to SCF ))
GBS for Bulk Carriers and Oil TankersGBS for Bulk Carriers and Oil Tankers
Outcome of GBS at MSC83
• MSC83/5/3 (CG Report):
– Reviewed
• Categorization of ship type (Refer to MSC83/5/16: Korea):
– WG agreed generally
• Linkage bet. GBS and FSA:
– Needed Further Discussion
• Importance of Statistical Data (Refer to MSC83/5/10):
– Premature to make a recommendation
Safety Level ApproachSafety Level Approach (( SLA)SLA) Work Plan for GBSWork Plan for GBS• Prescriptive and Safety Level
Approach should move forward as integral elements of GBS– Clarification of work to be
done to develop a generic GBS framework
– Identification and compilation of the elements of the framework
– Development of a prioritized plan to close the gaps and provide a unified framework for both prescriptive and safety approach
• Short term plan to MSC86
Outcome of GBS at MSC84
• Generic GBS Framework
• Draft Generic Guidelines for Developing Goal-Based Standards (GBS)
• Prescriptive Approach vs. SLA
• Prescriptive Approach GBS and SLA GBS to be developed in parallel.
• Comparison both GBS in the same field/topics.
• Work Plan*1 for further Development of Goal-Based Standards
• Intercessional (MSC84 – MSC85) • MSC85• Intercessional (MSC85 – MSC 86) • MSC86:
–Finalize Generic Guidelines–Consider long-term implementation of GBS
• Longer Term Consideration (7 sub-items)
*1: Refer to pp.31-32 of MSC 84/24 (Report of MSC84)
Generic GBS FrameworkGeneric GBS Framework
2ND Pilot Project
IACS Contribution
Prior to MSC83
• Contributed by preparing CSR as an example for review by the Pilot Panel (see MSC83/INF.5)
After MSC83 (Refer to Annex 2 of MSC85/5/1)
• Submitted a documentation package to PP (by 31 Mar 2008)
• Participated in PP meeting by answering questions and making a detailed presentation (at 5-6 May 2008)
• Provided Additional information to PP upon PP’s inquiries (by 30 May 2008)
2ND Pilot Project
Report from PP Co-ordinator (MSC85/5/1)
• Guidelines for Verification of Compliance with GBS
– PART A: Verification Process incl. Template of Self-Assessment Summary
– PART B: Information/Documentation Requirements and Evaluation Criteria
• Recommendation regarding Ship Recycling
• Modifications to Tier II Functional Requirements – II.3.3 Ultimate Strength, – Revised Definition of Net Scantlings
(in the footnote of II.3.4 Safety Margins)
Net Scantlings(Footnote of Tier II 3.4 Safety Margins)
Agreed at MSC83
• The net scantlings should provide the structural strength required to sustain the design loads, assuming the structure is in intact condition and accounting for the steel diminution that could be reasonably expected to occur during the life of the vessel due to corrosion and wastage.
PP’s new Proposal
• The net scantlings should …, assuming the structure is in intact condition. However, when assessing fatigue and hull girder global strength, a portion of the corrosion margin may be added to the net scantlings to reflect the material thickness that can reasonably be expected to exist over the design life.
MSC 85/5/6 (Japan) Comments on Net Scantling ConceptMSC 85/5/8 (Korea) Comments on the PP Report
Net Scantlings MSC 85/5/1 PP Report
13 The PP noted the revised definition of net scantlings as approved at MSC 83… … … … … … … …The PP believes this definition needs further clarity as it still contains ambiguity over the possible use of corrosion margins in the nominal thickness used for the strength evaluations. … … … …
14 Although the need for the revision of the footnote was agreed by all PP members, a few members pointed out that some wording in the last sentence of the new definition should be further refined to include, for example, the consideration of primary supporting members.
Application
GBS
• In MSC 83/WP.5, Draft New Reg. 3-[10] in SOLAS Ch.II-1 consequentially refers to the def. of bulk carriers in SOLAS Ch. XII
i.e. GBS Bulk Carriers are independent of their cross section and include ore carriers and combination carriers
CSR
• Bulk Carriers (Single Deck, TST and BHT) exclude Ore and Combination Carriers
n/a
Note: For other types of BC, refer to MSC 85/7/1
2008 2009 2010 2011 2012 2013
MSC85ApproveSOLASamendment
MSC86AdoptSOLASamendment
1.5 years
1 Jan 2011Enter Intoforce
1 Jan 2011Enter Intoforce
GOEsEvaluateRules for ships
2014
MSC90-92ApproveRules for ships
2.0 years
Chance to amend SOLAS based on the progressesChance to amend SOLAS based on the progresses
ROsAppeal/Review/Reapply
ShipsComply with GBS
YardsPreparenew design
1 Jan 2015StartApplicationto ships
1 Jan 2015StartApplicationto ships
2015
?
2016
Possible schedule to introduce GBS for BC & OT (MSC 85/5/4, Japan)
Thank you for your Attention!!
3. Ships shall be designed and constructed for a specified design life to be safe and environmentally friendly, when properly operated and maintained under the specified operating and environmental conditions, in intact and specified damage conditions, throughout their life.
.1 Safe and environmentally friendly means the ship shall have adequate strength, integrity and stability to minimize the risk of loss of the ship or pollution to the marine environment due to structural failure, including collapse, resulting in flooding or loss of watertight integrity.
.2 Environmentally friendly also includes the ship being constructed of materials for environmentally acceptable recycling.
.3 Safety also includes the ship’s structure, fittings and arrangements providing for safe access, escape, inspection and proper maintenance and facilitating safe operation.
…
Tier I, Goals (Para 3 of draft Regulation 3-[10], see MSC85/5 ANNEX 1)
3. Ships shall be designed and constructed for a specified design life to be safe and environmentally friendly, when properly operated and maintained under the specified operating and environmental conditions, in intact and specified damage conditions, throughout their life.
….4 Specified operating and environmental conditions are
defined by the intended operating area for the ship throughout its life and cover the conditions, including intermediate conditions, arising from cargo and ballast operations in port, waterways and at sea.
.5 Specified design life is the nominal period that the ship is assumed to be exposed to operating and/or environmental conditions and/or the corrosive environment and is used for selecting appropriate ship design parameters.
However, the ship’s actual service life may be longer or shorter depending on the actual operating conditions and maintenance of the ship throughout its life cycle.
Tier I, Goals (Para 3 of draft Regulation 3-[10] (MSC85/5 ANNEX 1)
4 A Ship Construction File with explicit information on how the functional requirements of the Goal-Based New Ship Construction Standards for Bulk Carriers and Oil Tankers have been applied in the ship design and construction shall be provided upon delivery of a new ship and kept on board the ship throughout its service. An additional copy of the Ship Construction File shall be kept ashore by the Company, as defined in regulation IX/1.2. The contents of the Ship Construction File shall be at least equivalent to the framework developed by the Organization.*
* Refer to MSC.1/Circ.[…] (see MSC 85/5 ANNEX 3 ) on Information to be included in a Ship Construction File.”
Regulation 3-[10] (MSC 85/5 ANNEX1) Goal-based new ship construction standards for
bulk carriers and oil tankers
GUIDELINES FOR THE INFORMATION TO BE INCLUDED IN A SHIP CONSTRUCTION FILE
GUIDELINES FOR THE INFORMATION TO BE INCLUDED IN A SHIP CONSTRUCTION FILE
Tier II Tier II Functional Functional
Require-Require-mentsments
Tier II will be descried as a part of International goal-based new ship construction standard for bulk carriers and oil tankers (GBS)
DESIGNII.1 Design life II.2 Environmental conditions II.3 Structural Strength II.4 Fatigue life II.5 Residual strength II.6 Protection against corrosion
II.6.1 Coating life II.6.2 Corrosion addition
II.7 Structural redundancy II.8 Watertight and weathertight integrity II.9 Human element considerations II.10 Design transparency
CONSTRUCTIONII.11 Construction quality procedures II.12 Survey
IN-SERVICE CONSIDERATIONSII.13 Survey and Maintenance II.14 Structural accessibility
RECYCLING CONSIDERATIONSII.15 Recycling
II.3.4 Ultimate strength
MSC83/WP.5
Ultimate strength calculations should include ultimate hull girder capacity and ultimate strength of plates and stiffeners.
PP’s new Proposal
MSC 85/5/1
Ships should be designed to have adequate ultimate strength. Ultimate strength calculations should include ultimate hull girder capacity and ultimate strength of plates and stiffeners, and be verified for a longitudinal bending moment based on the environmental conditions in II.2.
***
***