TRIAX 300 - Official Store. Nike.comniketown.nike.com/niketown/info/pdf/Triax300_250_120.pdf ·...

T R I A X 3 0 0 • 2 5 0 • 1 2 0 • 5 0 • 4 2 • 2 6

I N S T R U C T I O N S p . 1

M O D E D ’ E M P L O I p . 2 9

B E D I E N U N G S A N L E I T U N G p . 5 7

I S T R U Z I O N I p . 85

I N S T R U C C I O N E S p . 113

G E B R U I K S A A N W I J Z I N G p . 141

B R U K S A N V I S N I N G p . 169

p . 197

1

EN Manual FINAL (RunII) NEW 4/26/99 5:00 PM

CONTENTS

MODES p. 4

a CHRONOGRAPH p. 6

b DATA p. 9

c TIMER p. 11

d COUNTER p. 15

e ALARM p. 17

f TIME p. 20

g DEMO p. 23

h NIKE ELECTROLITE DISPLAY p. 24

SPECIFICATIONS p. 26

WARRANTY p. 27

Information is power.

Your NIKE Triax running watch is engineered to meet the specific

performance demands of the running athlete. It will provide quick,

one-touch access to a variety of critical information during your

training runs and in competition.

This manual combines step-by-step operational instructions to help you

identify the programmable features and functions of each specific mode.

For a quick demonstration of the watch features, press the START/LAP and

STOP/NEXT buttons simultaneously. Press any button to exit DEMO mode.

32

EN Manual FINAL (RunII) NEW 4/26/99 5:00 PM

MODES

Cycle to a mode

Press MODE button repeatedly until the desired mode (CHRONOGRAPH, DATA, TIMER, COUNTER, ALARM or TIME) appears. Release button; in 1.5 seconds the selected mode display appears.Note: Press and hold the MODE button for one second in any mode for quick return to TIME mode.

Measures and records lap and split times within runs.

Recalls lap and splittime data from recorded runs.

Countdown interval timer. Up to 5 consecutively counting,programmable segments.

a CHRONOGRAPH b DATA c dTIMER COUNTER

4

Counts in positive ornegative increments of one.

Features 7 alarms. Provides time and calendar

information for two

time zones.

Displays brief view offunctions within eachmode.

Provides one touchbacklighting.

e ALARM f TIME g DEMO h ELECTROLITE

5

EN Manual FINAL (RunII) NEW 4/26/99 5:00 PM Page 4

Mark lap completion and start next lap measurementPress the START/LAP button.The completed lap number appears above the primary display. The split time appears for 7 seconds, then the display returns to the overall time. Completed lap time appears for 7 seconds, then the display shows the elapsed time for the next lap.

Stop measuring a lapPress the STOP/NEXT button.The counting stops, and the word “STOP” appears on the display. The lap time and total elapsed time appear.

Restart a lap measurementPress the START/LAP button.The counting continues.

Note: If you want to save the times for your most recent run, cycle to the next run. If you want to erase the times for your most recent run, reset the run.

Cycle to the next runThe chronograph must be stopped to cycle to the next run. Press and hold the STOP/NEXT button for two seconds.“HOLD NEXT” flashes in the display. Then the next run sequenceappears at the top of the display. The time digits return to zero. Your Triax watch will record the next lap times as part of a new run.

7

Start measuring a lapPress the START/LAP button.The lap/split time display begins with 1/100 seconds, thenseconds, then minutes. If the accumulated times in a runproceed to hours, the elapsed hours appear above theprimary display and replace 1/100 seconds in thesecondary display.

MODE

STOP/NEXT

START/LAPADJUST/RESET

ELECTROLITE

RUN NUMBER

SPLIT

STOP MARK

a CHRONOGRAPH 6

In CHRONOGRAPH mode you canmeasure and record lap times andsplit times for multiple runs.Recorded times are accessed in DATA mode.

Lap and split times are displayedsimultaneously. The primary displayis centrally located and larger thanthe secondary display, whichappears below. You can selectwhether lap or split time occupiesthe primary position.

Run - A run is an exercise session consisting of any number of consecutive lap time measurements. Lap - Lap time is the time required to cover a given segment of a run.Split - Split time is the total elapsed time in a run up to the completion of a lap.


In DATA mode you can recall lap and split timesmeasurements from yoursaved runs.

Cycle through the run numbersPress the STOP/NEXT button.Run number and date of run are displayed.

NOTE: If dashes appear in the display, no data exists for that run.

Cycle by date through lap and split times, total time, best time, and average time for each runPress the START/LAP button.

MODE

STOP/NEXT


RUN NUMBER

DATE ELECTROLITE

b DATA 9

Reset a runThe chronograph must be stopped to reset a run.Press and hold ADJUST/RESET for 2 seconds.“HOLD RESET” flashes to reset current run. Time returns to zero.

NOTE: Over 100 hours, the run will be reset automatically.

Switch the primary display between lap and split time In CHRONOGRAPH mode, press the ADJUST/RESET button. Lap and split times will change between primary and secondary position on the display.

Note that display settings in CHRONOGRAPH mode are also reflected in DATA mode.

Check remaining memory capacityWhen the chronograph is reset, press the STOP/NEXT button.Lap memory capacity is displayed.

8


TIMER mode provides a programmable countdowninterval timer. You can set up to 5 timed segments for yourworkout. As each timer segment is completed the next begins. Set unused segments to zero.

Set the timer segments1 Press and hold the ADJUST/RESET button for two seconds.“HOLD ADJUST” flashes in the display, then the segmentnumber and hour:minutes seconds display appears. The seconds indicator flashes.

2 Press the START/LAP button to increase the flashing value.Press once to increase the flashing value. Hold down forquick advance.

REPEAT NUMBER

SEGMENT NUMBER

COUNTDOWN TIMER

MODE

STOP/NEXT


ELECTROLITE

c TIMER 11

Erase data for an individual runPress the STOP/NEXT button to select a run that you want to delete.

Press and hold the ADJUST/RESET button for 3 seconds.“HOLD CLEAR” flashes, and you will hear a confirmation tone,then the data for the selected run is erased.

NOTE: When you delete a run the next run takes its place. For example, if you delete RUN 3 from memory, RUN 4 replaces RUN 3. If DATA memory becomes full during a run, delete that run and begin a new run.

Erase all dataPress and hold the ADJUST/RESET button for an additional 4seconds after deleting an individual run.

You will hear a continuous tone. “HOLD CLEAR ALL” flashes inthe display. After 7 seconds, [-- --] indicates that all data hasbeen erased.

10


Start the countdown1 Set any or all 5 segments.

2 Press the STOP/NEXT button to advance to the segment you want to start with.

3 Press the START/LAP button.Countdown begins. When the countdown reaches zero, thetimer beeps, and the countdown begins for the next segment.The number completed timer cycles appears above thecountdown display.

NOTE: When the countdown is complete for all 5 segments, the cycle repeats. For example, when segment 1 is completed,segment 2 will begin. If segments 3,4 and 5 are set to zero,segment 1 will begin at the completion of segment 2.

Stop the timer during countdownPress the STOP/NEXT button.

Reset the timerWhen timer is stopped, press and hold the ADJUST/RESETbutton for about 2 seconds. Display returns to the original starting point.

13

3 Press the STOP/NEXT button to decrease the flashing value.

4 Press the MODE button to cycle to the next value.

5 Repeat steps 2-4 until you have set all values: seconds,minutes, hours, and segment numbers.

6 Press the ADJUST/RESET button to save timer settings.

12


In COUNTER mode you can countin positive or negative incrementsof one.

Increase the count by onePress the START/LAP button.

Decrease the count by onePress the STOP/NEXT button.

NOTE: You can count from -999 to 999, beyond which the counter returns to zero.

COUNTER

MODE

STOP/NEXT


ELECTROLITE

d COUNTER 15

Clear all timer segmentsTimer must be stopped and reset to clear all segments.Press and hold the STOP/NEXT button for 4 seconds.“HOLD ALL CLEAR” flashes and all timer segments reset to zero.

14


In ALARM mode you can set seven distinctalarms that will sound intermittently for 55 seconds, or until any button is pressed.

The alarm sounds for fifteen seconds, then pauses for ten. Then it rings for ten seconds, pauses for ten seconds, and rings for ten more seconds. For the last five seconds Nike Electrolite display will flash in unison.

Set an alarm1 Press the STOP/NEXT button to select one of seven alarmsto set.

2 Press and hold the ADJUST/RESET button for 2 seconds.“HOLD ADJUST” flashes in the display, then the hours:minutesand time zone appear. The hours indicator flashes.

e ALARM

TIME ZONE

ALARM NUMBER

ALARM TIME ON/OFF MARK

MODE

STOP/NEXT


ELECTROLITE

17

Reset the counter to zeroPress and hold ADJUST/RESET for 2 seconds.“HOLD RESET” flashes in the display, then the count returns to zero.

16


7 Press the ADJUST/RESET button to save the changes and activate the alarm.

NOTE: Each alarm is active only in the time zone for which it is set.

Advance to the next alarmPress the STOP/NEXT button.The next alarm number appears at the bottom of the display.

Turn the alarm on and off Press the START/LAP button. The word ON toggles off and on each time you press the button.

Turn all alarms offPress and hold the STOP/NEXT button for 4 seconds. “HOLD ALL OFF” flashes and all alarms turn off.

19

3 Press the START/LAP button to increase the flashing value.Press once to advance one hour. Hold down for quick advance.


5 Press the MODE button to cycle to the next adjustable value.

6 Repeat steps 3-5 until you have set all values: hour,minutes, time zone.

18


3 Press the MODE button to cycle to the next value.

4 Press the START/LAP button to increase the flashing value.


6 Repeat steps 3-5 until you have set all values: seconds, hours,minutes, day, month, year, 12 or 24-hour clock, and day/date ormonth/date display.

7 Press the ADJUST/RESET button to save the changes.

21

In TIME mode you canset the time andcalendar informationfor two time zones.

NOTE: Press and hold the MODE button for onesecond in any mode forquick return to TIME mode.

Set time of day and calendar1 Press and hold the ADJUST/RESET button for two seconds.

“HOLD ADJUST” flashes in the display, then the time and time zone appears. The seconds indicator flashes.

NOTE: Under thirty seconds the value resets to zero. Over thirty seconds, minutes advance.

2 Press the START/LAP or STOP/NEXT button to reset the seconds.

MODE

DAY/MONTH DATE

STOP/NEXT


ELECTROLITE

TIME ZONE

TIME

f TIME 20


In DEMO mode you candisplay a brief view offunctions within eachmode.

Activate DEMO modeDEMO mode is accessed through TIME mode. In TIME mode, press and hold the START/LAP and STOP/NEXTbuttons simultaneously. While holding buttons, you will hear the sound demonstration.The watch will cycle through the modes, briefly demonstratingthe functions of each.

Press any button to exit DEMO mode.

NOTE: If the timer or chronograph is running, their values will be displayed in DEMO mode.

MODE

STOP/NEXT


ELECTROLITE

g DEMO 23

Switch between time zones1 In TIME mode, press and hold the STOP/NEXT button.The alternate time zone time-of-day information appears.

2 Release the button when time zone indicator stops flashing.

3 Follow the preceding instructions to set the time and calendarinformation for the alternate time zone.

Hold the STOP/NEXT button for fewer than 3 seconds for a briefdisplay of alternate time zone information.

Turn the confirmation tone on and offPress the START/LAP button.The symbol toggles on and off each time the button is pressed.

NOTE: Press and hold the MODE button for one second in any mode for quick return to TIME mode.

22


De-activate the auto-Electrolite featurePress and hold the Electrolite button for about 2 seconds. The auto illumination symbol disappears.

NOTE: The auto-Electrolite feature will turn itself off after 12 hours to conserve battery life.

25h NIKE ELECTROLITE DISPLAY

You can illuminate the display by pressing the Electrolite button.Activating the auto-Electrolitedisplay illuminates the display atthe press of any button.

Activate the auto-Electrolite featurePress and hold the Electrolite button for 2 seconds.The auto illumination symbol appears. The Electrolitedisplay will illuminate for 2 seconds at the press of any button.

AUTO EL MARK

MODE

STOP/NEXT


ELECTROLITE

24


WARRANTY 27

[USA ONLY] One Year Limited Warranty (USA)

Your NIKE watch is warranted to be free of defects in materials or workmanship, undernormal use, for a period of one year from the date of original retail purchase. This limitedwarranty excludes the battery, crystal, strap, or damage resulting from improper care orhandling, accidents, modification, unauthorized repairs, or normal wear.

Return the defective watch and the store receipt to the place of purchase. If there is acovered defect, the defective parts or watch will be repaired or replaced, at Nike's option,with the same product (if available) or a similar product of equal price.

This limited warranty is in lieu of all other express or implied warranties, and excludesrefund of the purchase price. In no event shall NIKE be liable for direct, indirect,incidental, or consequential damages arising out of the use of the watch, and any recovery is limited to the purchase price. No other person or company is authorized to change this limited warranty, and your dealer is solely responsible for any

other warranties.

CHRONOGRAPH 99:59’59”99TIMER 99:59’59”COUNTER 999 / -999

Up to 10 ATM

CRYSTAL Mineral GlassCASE Plastic ResinMETAL BEZEL (Triax 300/51 only) Anodized AluminumCASEBACK Stainless SteelSTRAP UrethaneBUCKLE Stainless Steel

When TIME display flashes continuously, it may be time to replace battery. Battery life is 1.5-2 years. Triax 300/250/120 requires CR2025. Triax 50/42/26 requires CR1620.

MODE LIMITS

TRIAX MATERIALS

BATTERY LIFE

WATER RESISTANCE

26SPECIFICATIONS


28

Please fill out this registration card and retain as proof of warranty.

OWNER’S NAME

DATE OF PURCHASE

RETAILER (IF KNOWN)

NAME/STYLE OF WATCH

SERIAL NUMBER (LOCATED ON BACK OF WATCH)

SIGNATURE


TRIAX 300 - Official Store. Nike.comniketown.nike.com/niketown/info/pdf/Triax300_250_120.pdf ·...

Documents

Transcript of TRIAX 300 - Official Store. Nike.comniketown.nike.com/niketown/info/pdf/Triax300_250_120.pdf ·...